Merge branch 'master' of git://git.denx.de/u-boot-spi
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fb9176b..7383975 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -524,6 +524,7 @@
select OF_SEPARATE
select SPL_STACK_R if !MACH_SUN9I
select SPL_SYS_MALLOC_SIMPLE if !MACH_SUN9I
+ select SYS_NS16550
select USB
select USB_STORAGE
select USB_KEYBOARD
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 33c76ef..dfb0a3e 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -26,13 +26,18 @@
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y += clock_sun8i_a83t.o
+else
obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
+endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
obj-$(CONFIG_MACH_SUN6I) += tzpc.o
obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
+obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
ifndef CONFIG_SPL_BUILD
ifdef CONFIG_ARMV7_PSCI
@@ -49,6 +54,7 @@
obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
+obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
obj-y += fel_utils.o
endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 0f26cb0..7dfb7f5 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -76,6 +76,10 @@
sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
index 7c8eff9..7e6bd61 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
@@ -59,7 +59,7 @@
/* open the clock for uart */
setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1));
}
int clock_twi_onoff(int port, int state)
@@ -67,16 +67,13 @@
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- if (port > 2)
- return -1;
-
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
else
clrbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
return 0;
}
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index 916ee48..4501884 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -77,9 +77,6 @@
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- if (port > 3)
- return -1;
-
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb2_gate,
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c b/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c
new file mode 100644
index 0000000..3e8728f
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c
@@ -0,0 +1,136 @@
+/*
+ * A83 specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ clock_set_pll1(408000000);
+ /* enable pll_hsic, default is 480M */
+ writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
+ writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
+ while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
+
+ /* switch to default 24MHz before changing to hsic */
+ writel(0x0, &ccm->cci400_cfg);
+ sdelay(50);
+ writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
+ sdelay(100);
+
+ /* switch before changing pll6 */
+ clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
+ AHB1_CLK_SRC_OSC24M);
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+ while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+ writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
+
+ /* timestamp */
+ writel(1, 0x01720000);
+}
+#endif
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb2 */
+ writel(APB2_CLK_SRC_OSC24M|
+ APB2_CLK_RATE_N_1|
+ APB2_CLK_RATE_M(1),
+ &ccm->apb2_div);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+ AXI_DIV_2 << AXI1_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
+ CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+
+ /* clk = 24*n/p, p is ignored if clock is >288MHz */
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+ CCM_PLL1_CTRL_N(clk / 24000000),
+ &ccm->pll1_c0_cfg);
+ while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
+
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+ CCM_PLL1_CTRL_N(clk / (24000000)),
+ &ccm->pll1_c1_cfg);
+ while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
+
+ /* Switch CPU to PLL1 */
+ writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+ AXI_DIV_2 << AXI1_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
+ CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll5(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ unsigned int div1 = 0, div2 = 0;
+
+ /* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
+ writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
+ CCM_PLL5_CTRL_N(clk / (24000000)) |
+ div2 << CCM_PLL5_DIV2_SHIFT |
+ div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
+
+ udelay(5500);
+}
+
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+ int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+ CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+ int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
+ CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+ return 24000000 * n / div1 / div2;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index 1e73332..b9bc70c 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -73,6 +73,8 @@
puts("CPU: Allwinner H3 (SUN8I)\n");
#elif defined CONFIG_MACH_SUN9I
puts("CPU: Allwinner A80 (SUN9I)\n");
+#elif defined CONFIG_MACH_SUN8I_A83T
+ puts("CPU: Allwinner A83T (SUN8I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
new file mode 100644
index 0000000..d757e40
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
@@ -0,0 +1,424 @@
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ * Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 1
+
+struct dram_para {
+ u8 cs1;
+ u8 seq;
+ u8 bank;
+ u8 rank;
+ u8 rows;
+ u8 bus_width;
+ u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+ MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 |
+ (para->seq ? MCTL_CR_SEQUENCE : 0) |
+ ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+ MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+ MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+ &mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+ u8 orig_rank = para->rank;
+ int rows, columns;
+
+ /* Row detect */
+ para->page_size = 512;
+ para->seq = 1;
+ para->rows = 16;
+ para->rank = 1;
+ mctl_set_cr(para);
+ for (rows = 11 ; rows < 16 ; rows++) {
+ if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+ break;
+ }
+
+ /* Column (page size) detect */
+ para->rows = 11;
+ para->page_size = 8192;
+ mctl_set_cr(para);
+ for (columns = 9 ; columns < 13 ; columns++) {
+ if (mctl_mem_matches(1 << columns))
+ break;
+ }
+
+ para->seq = 0;
+ para->rank = orig_rank;
+ para->rows = rows;
+ para->page_size = 1 << columns;
+ mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+ const unsigned int ctrl_freq =
+ CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+ return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ u32 reg_val;
+
+ u8 tccd = 2;
+ u8 tfaw = ns_to_t(50);
+ u8 trrd = max(ns_to_t(10), 4);
+ u8 trcd = ns_to_t(15);
+ u8 trc = ns_to_t(53);
+ u8 txp = max(ns_to_t(8), 3);
+ u8 twtr = max(ns_to_t(8), 4);
+ u8 trtp = max(ns_to_t(8), 4);
+ u8 twr = max(ns_to_t(15), 3);
+ u8 trp = ns_to_t(15);
+ u8 tras = ns_to_t(38);
+
+ u16 trefi = ns_to_t(7800) / 32;
+ u16 trfc = ns_to_t(350);
+
+ /* Fixed timing parameters */
+ u8 tmrw = 0;
+ u8 tmrd = 4;
+ u8 tmod = 12;
+ u8 tcke = 3;
+ u8 tcksrx = 5;
+ u8 tcksre = 5;
+ u8 tckesr = 4;
+ u8 trasmax = 24;
+ u8 tcl = 6; /* CL 12 */
+ u8 tcwl = 4; /* CWL 8 */
+ u8 t_rdata_en = 4;
+ u8 wr_latency = 2;
+
+ u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
+ u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
+ u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+
+ u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
+ u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
+ u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
+
+ /* Set work mode register */
+ mctl_set_cr(para);
+ /* Set mode register */
+ writel(MCTL_MR0, &mctl_ctl->mr0);
+ writel(MCTL_MR1, &mctl_ctl->mr1);
+ writel(MCTL_MR2, &mctl_ctl->mr2);
+ writel(MCTL_MR3, &mctl_ctl->mr3);
+ /* Set dram timing */
+ reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+ writel(reg_val, &mctl_ctl->dramtmg0);
+ reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+ writel(reg_val, &mctl_ctl->dramtmg1);
+ reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+ writel(reg_val, &mctl_ctl->dramtmg2);
+ reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+ writel(reg_val, &mctl_ctl->dramtmg3);
+ reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+ writel(reg_val, &mctl_ctl->dramtmg4);
+ reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+ writel(reg_val, &mctl_ctl->dramtmg5);
+ /* Set two rank timing and exit self-refresh timing */
+ reg_val = readl(&mctl_ctl->dramtmg8);
+ reg_val &= ~(0xff << 8);
+ reg_val &= ~(0xff << 0);
+ reg_val |= (0x33 << 8);
+ reg_val |= (0x8 << 0);
+ writel(reg_val, &mctl_ctl->dramtmg8);
+ /* Set phy interface time */
+ reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+ | (wr_latency << 0);
+ /* PHY interface write latency and read latency configure */
+ writel(reg_val, &mctl_ctl->pitmg0);
+ /* Set phy time PTR0-2 use default */
+ writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+ writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+ /* Set refresh timing */
+ reg_val = (trefi << 16) | (trfc << 0);
+ writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ writel(val, &mctl_ctl->pir);
+ mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ if (para->rank == 2)
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+ else
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ mctl_data_train_cfg(para);
+ mctl_set_pir(0x5f3);
+
+ return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static void set_master_priority(void)
+{
+ writel(0x00a0000d, MCTL_MASTER_CFG0(0));
+ writel(0x00500064, MCTL_MASTER_CFG1(0));
+ writel(0x07000009, MCTL_MASTER_CFG0(1));
+ writel(0x00000600, MCTL_MASTER_CFG1(1));
+ writel(0x01000009, MCTL_MASTER_CFG0(3));
+ writel(0x00000064, MCTL_MASTER_CFG1(3));
+ writel(0x08000009, MCTL_MASTER_CFG0(4));
+ writel(0x00000640, MCTL_MASTER_CFG1(4));
+ writel(0x20000308, MCTL_MASTER_CFG0(8));
+ writel(0x00001000, MCTL_MASTER_CFG1(8));
+ writel(0x02800009, MCTL_MASTER_CFG0(9));
+ writel(0x00000100, MCTL_MASTER_CFG1(9));
+ writel(0x01800009, MCTL_MASTER_CFG0(5));
+ writel(0x00000100, MCTL_MASTER_CFG1(5));
+ writel(0x01800009, MCTL_MASTER_CFG0(7));
+ writel(0x00000100, MCTL_MASTER_CFG1(7));
+ writel(0x00640009, MCTL_MASTER_CFG0(6));
+ writel(0x00000032, MCTL_MASTER_CFG1(6));
+ writel(0x0100000d, MCTL_MASTER_CFG0(2));
+ writel(0x00500080, MCTL_MASTER_CFG1(2));
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ u32 low_data_lines_status; /* Training status of datalines 0 - 7 */
+ u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+ u32 i, rval;
+
+ auto_set_timing_para(para);
+
+ /* Set dram master access priority */
+ writel(0x000101a0, &mctl_com->bwcr);
+ /* set cpu high priority */
+ writel(0x1, &mctl_com->mapr);
+ set_master_priority();
+ udelay(250);
+
+ /* Disable dram VTC */
+ clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0 | 0x1 << 30);
+ clrsetbits_le32(&mctl_ctl->pgcr1, 0x1 << 24, 0x1 << 26);
+
+ writel(0x94be6fa3, MCTL_PROTECT);
+ udelay(100);
+ clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 26);
+ writel(0x0, MCTL_PROTECT);
+ udelay(100);
+
+
+ /* Set ODT */
+ if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+ rval = 0x0;
+ else
+ rval = 0x2;
+
+ for (i = 0 ; i < 11 ; i++) {
+ clrsetbits_le32(DATX0IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX1IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX2IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX3IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ }
+
+ for (i = 0; i < 31; i++)
+ clrsetbits_le32(CAIOCR(i), 0x3 << 26 | 0x3 << 16, 0x2 << 26);
+
+ /* set PLL configuration */
+ if (CONFIG_DRAM_CLK >= 480)
+ setbits_le32(&mctl_ctl->pllgcr, 0x1 << 19);
+ else
+ setbits_le32(&mctl_ctl->pllgcr, 0x3 << 19);
+
+ /* Auto detect dram config, set 2 rank and 16bit bus-width */
+ para->cs1 = 0;
+ para->rank = 2;
+ para->bus_width = 16;
+ mctl_set_cr(para);
+
+ /* Open DQS gating */
+ clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+ clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+ if (readl(&mctl_com->cr) & 0x1)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+
+ mctl_data_train_cfg(para);
+ /* ZQ calibration */
+ clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff);
+ clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff);
+ /* CA calibration */
+ mctl_set_pir(0x0201f3 | 0x1<<10);
+
+ /* DQS gate training */
+ if (mctl_train_dram(para) != 0) {
+ low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03;
+ high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+ if (low_data_lines_status == 0x3)
+ return -EIO;
+
+ /* DRAM has only one rank */
+ para->rank = 1;
+ mctl_set_cr(para);
+
+ if (low_data_lines_status == high_data_lines_status)
+ goto done; /* 16 bit bus, 1 rank */
+
+ if (!(low_data_lines_status & high_data_lines_status)) {
+ /* Retry 16 bit bus-width with CS1 set */
+ para->cs1 = 1;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) == 0)
+ goto done;
+ }
+
+ /* Try 8 bit bus-width */
+ writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+ para->cs1 = 0;
+ para->bus_width = 8;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) != 0)
+ return -EIO;
+ }
+done:
+ /* Check the dramc status */
+ mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+ /* Close DQS gating */
+ setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+ /* set PGCR3,CKE polarity */
+ writel(0x00aa0060, &mctl_ctl->pgcr3);
+ /* Enable master access */
+ writel(0xffffffff, &mctl_com->maer);
+
+ return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ clrbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+ clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+ clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31);
+
+ clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL);
+
+ clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+ CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+ CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+ mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << 14);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+
+ /* Set dram master access priority */
+ writel(0x0000e00f, &mctl_ctl->clken); /* normal */
+
+ udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ struct dram_para para = {
+ .cs1 = 0,
+ .bank = 1,
+ .rank = 1,
+ .rows = 15,
+ .bus_width = 16,
+ .page_size = 2048,
+ };
+
+ setbits_le32(SUNXI_PRCM_BASE + 0x1e0, 0x1 << 8);
+
+ writel(0, (SUNXI_PRCM_BASE + 0x1e8));
+ udelay(10);
+
+ mctl_sys_init(¶);
+
+ if (mctl_channel_init(¶) != 0)
+ return 0;
+
+ auto_detect_dram_size(¶);
+
+ /* Enable master software clk */
+ writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+ /* Set DRAM ODT MAP */
+ if (para.rank == 2)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+
+ return para.page_size * (para.bus_width / 8) *
+ (1 << (para.bank + para.rank + para.rows));
+}
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c
index b721d60..2020d75 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c
@@ -73,10 +73,10 @@
for (i = 0; i < 4; i++) {
val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) |
- DATX_IOCR_READ_DELAY((read >> (i * 4)) & 0xf);
+ DATX_IOCR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2);
for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++)
- setbits_le32(&mctl_ctl->datx[i].iocr[j], val);
+ writel(val, &mctl_ctl->datx[i].iocr[j]);
}
clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
@@ -85,8 +85,8 @@
val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) |
DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf);
- setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQS], val);
- setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN], val);
+ writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQS]);
+ writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN]);
}
setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
@@ -436,8 +436,8 @@
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
struct dram_para para = {
- .read_delays = 0x00007979,
- .write_delays = 0x6aaa0000,
+ .read_delays = 0x00007979, /* dram_tpr12 */
+ .write_delays = 0x6aaa0000, /* dram_tpr11 */
.dual_rank = 0,
.bus_width = 32,
.row_bits = 15,
diff --git a/arch/arm/cpu/armv7/sunxi/pmic_bus.c b/arch/arm/cpu/armv7/sunxi/pmic_bus.c
index 9e05127..5b81a8d 100644
--- a/arch/arm/cpu/armv7/sunxi/pmic_bus.c
+++ b/arch/arm/cpu/armv7/sunxi/pmic_bus.c
@@ -23,6 +23,7 @@
#define AXP221_CTRL_ADDR 0x3e
#define AXP221_INIT_DATA 0x3e
+/* AXP818 device and runtime addresses are same as AXP223 */
#define AXP223_DEVICE_ADDR 0x3a3
#define AXP223_RUNTIME_ADDR 0x2d
@@ -35,7 +36,7 @@
if (!needs_init)
return 0;
-#ifdef CONFIG_AXP221_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
# ifdef CONFIG_MACH_SUN6I
p2wi_init();
ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
@@ -61,7 +62,7 @@
return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
#elif defined CONFIG_AXP209_POWER
return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
-#elif defined CONFIG_AXP221_POWER
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
# ifdef CONFIG_MACH_SUN6I
return p2wi_read(reg, data);
# else
@@ -76,7 +77,7 @@
return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
#elif defined CONFIG_AXP209_POWER
return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
-#elif defined CONFIG_AXP221_POWER
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
# ifdef CONFIG_MACH_SUN6I
return p2wi_write(reg, data);
# else
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 521aa4c..03f984a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -176,6 +176,8 @@
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb
+dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ sun8i-a83t-allwinner-h8homlet-v2.dtb
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 0000000..342e1d3
--- /dev/null
+++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+ model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+ compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_b>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
new file mode 100644
index 0000000..245b819
--- /dev/null
+++ b/arch/arm/dts/sun8i-a83t.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ cpu@100 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x100>;
+ };
+
+ cpu@101 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x101>;
+ };
+ cpu@102 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x102>;
+ };
+
+ cpu@103 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x103>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-a83t-pinctrl";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01c20800 0x400>;
+ clocks = <&osc24M>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PH2", "PH3";
+ allwinner,function = "i2c1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PH4", "PH5";
+ allwinner,function = "i2c2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ allwinner,pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PF2", "PF4";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart0_pins_b: uart0@1 {
+ allwinner,pins = "PB9", "PB10";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index 3e5d999..8ca58ae 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -15,7 +15,9 @@
#define CLK_GATE_CLOSE 0x0
/* clock control module regs definition */
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
+#if defined(CONFIG_MACH_SUN8I_A83T)
+#include <asm/arch/clock_sun8i_a83t.h>
+#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
#include <asm/arch/clock_sun6i.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/clock_sun9i.h>
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 09337a1..5c76275 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -220,11 +220,7 @@
#define CCM_PLL11_CTRL_UPD (0x1 << 30)
#define CCM_PLL11_CTRL_EN (0x1 << 31)
-#if defined CONFIG_MACH_SUN8I_H3
#define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */
-#else
-#define AHB1_ABP1_DIV_DEFAULT 0x00002020 /* AHB1=AXI/4, APB1=AHB1/2 */
-#endif
#define AXI_GATE_OFFSET_DRAM 0
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h b/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h
new file mode 100644
index 0000000..5f93d7f
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h
@@ -0,0 +1,304 @@
+/*
+ * sun8i a83t clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * from sun6i.h
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_SUN8I_A83T_H
+#define _SUNXI_CLOCK_SUN8I_A83T_H
+
+struct sunxi_ccm_reg {
+ u32 pll1_c0_cfg; /* 0x00 c1cpu# pll control */
+ u32 pll1_c1_cfg; /* 0x04 c1cpu# pll control */
+ u32 pll2_cfg; /* 0x08 pll2 audio control */
+ u32 reserved1;
+ u32 pll3_cfg; /* 0x10 pll3 video0 control */
+ u32 reserved2;
+ u32 pll4_cfg; /* 0x18 pll4 ve control */
+ u32 reserved3;
+ u32 pll5_cfg; /* 0x20 pll5 ddr control */
+ u32 reserved4;
+ u32 pll6_cfg; /* 0x28 pll6 peripheral control */
+ u32 reserved5[3]; /* 0x2c */
+ u32 pll7_cfg; /* 0x38 pll7 gpu control */
+ u32 reserved6[2]; /* 0x3c */
+ u32 pll8_cfg; /* 0x44 pll8 hsic control */
+ u32 pll9_cfg; /* 0x48 pll9 de control */
+ u32 pll10_cfg; /* 0x4c pll10 video1 control */
+ u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */
+ u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */
+ u32 apb2_div; /* 0x58 APB2 divide ratio */
+ u32 ahb2_div; /* 0x5c AHB2 divide ratio */
+ u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */
+ u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */
+ u32 apb1_gate; /* 0x68 apb1 module clock gating 3 */
+ u32 apb2_gate; /* 0x6c apb2 module clock gating 4 */
+ u32 reserved7[2]; /* 0x70 */
+ u32 cci400_cfg; /* 0x78 cci400 clock configuration A83T only */
+ u32 reserved8; /* 0x7c */
+ u32 nand0_clk_cfg; /* 0x80 nand clock control */
+ u32 reserved9; /* 0x84 */
+ u32 sd0_clk_cfg; /* 0x88 sd0 clock control */
+ u32 sd1_clk_cfg; /* 0x8c sd1 clock control */
+ u32 sd2_clk_cfg; /* 0x90 sd2 clock control */
+ u32 sd3_clk_cfg; /* 0x94 sd3 clock control */
+ u32 reserved10; /* 0x98 */
+ u32 ss_clk_cfg; /* 0x9c security system clock control */
+ u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */
+ u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */
+ u32 reserved11[2]; /* 0xa8 */
+ u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control */
+ u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */
+ u32 i2s2_clk_cfg; /* 0xb8 I2S2 clock control */
+ u32 tdm_clk_cfg; /* 0xbc TDM clock control */
+ u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */
+ u32 reserved12[2]; /* 0xc4 */
+ u32 usb_clk_cfg; /* 0xcc USB clock control */
+ u32 reserved13[9]; /* 0xd0 */
+ u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */
+ u32 dram_pll_cfg; /* 0xf8 PLL_DDR cfg register */
+ u32 mbus_reset; /* 0xfc MBUS reset control */
+ u32 dram_clk_gate; /* 0x100 DRAM module gating */
+ u32 reserved14[5]; /* 0x104 BE0 */
+ u32 lcd0_clk_cfg; /* 0x118 LCD0 module clock */
+ u32 lcd1_clk_cfg; /* 0x11c LCD1 module clock */
+ u32 reserved15[4]; /* 0x120 */
+ u32 mipi_csi_clk_cfg; /* 0x130 MIPI CSI module clock */
+ u32 csi_clk_cfg; /* 0x134 CSI module clock */
+ u32 reserved16; /* 0x138 */
+ u32 ve_clk_cfg; /* 0x13c VE module clock */
+ u32 reserved17; /* 0x140 */
+ u32 avs_clk_cfg; /* 0x144 AVS module clock */
+ u32 reserved18[2]; /* 0x148 */
+ u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */
+ u32 hdmi_slow_clk_cfg; /* 0x154 HDMI slow module clock */
+ u32 reserved19; /* 0x158 */
+ u32 mbus_clk_cfg; /* 0x15c MBUS module clock */
+ u32 reserved20[2]; /* 0x160 */
+ u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */
+ u32 reserved21[13]; /* 0x16c */
+ u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */
+ u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */
+ u32 gpu_hyd_clk_cfg; /* 0x1a8 GPU HYD clock config */
+ u32 reserved22[21]; /* 0x1ac */
+ u32 pll_stable0; /* 0x200 PLL stable time 0 */
+ u32 pll_stable1; /* 0x204 PLL stable time 1 */
+ u32 reserved23; /* 0x208 */
+ u32 pll_stable_status; /* 0x20c PLL stable status register */
+ u32 reserved24[4]; /* 0x210 */
+ u32 pll1_c0_bias_cfg; /* 0x220 PLL1 c0cpu# Bias config */
+ u32 pll2_bias_cfg; /* 0x224 PLL2 audio Bias config */
+ u32 pll3_bias_cfg; /* 0x228 PLL3 video Bias config */
+ u32 pll4_bias_cfg; /* 0x22c PLL4 ve Bias config */
+ u32 pll5_bias_cfg; /* 0x230 PLL5 ddr Bias config */
+ u32 pll6_bias_cfg; /* 0x234 PLL6 periph Bias config */
+ u32 pll1_c1_bias_cfg; /* 0x238 PLL1 c1cpu# Bias config */
+ u32 pll8_bias_cfg; /* 0x23c PLL7 Bias config */
+ u32 reserved25; /* 0x240 */
+ u32 pll9_bias_cfg; /* 0x244 PLL9 hsic Bias config */
+ u32 de_bias_cfg; /* 0x248 display engine Bias config */
+ u32 video1_bias_cfg; /* 0x24c pll video1 bias register */
+ u32 c0_tuning_cfg; /* 0x250 pll c0cpu# tuning register */
+ u32 c1_tuning_cfg; /* 0x254 pll c1cpu# tuning register */
+ u32 reserved26[11]; /* 0x258 */
+ u32 pll2_pattern_cfg0; /* 0x284 PLL2 Pattern register 0 */
+ u32 pll3_pattern_cfg0; /* 0x288 PLL3 Pattern register 0 */
+ u32 reserved27; /* 0x28c */
+ u32 pll5_pattern_cfg0; /* 0x290 PLL5 Pattern register 0*/
+ u32 reserved28[4]; /* 0x294 */
+ u32 pll2_pattern_cfg1; /* 0x2a4 PLL2 Pattern register 1 */
+ u32 pll3_pattern_cfg1; /* 0x2a8 PLL3 Pattern register 1 */
+ u32 reserved29; /* 0x2ac */
+ u32 pll5_pattern_cfg1; /* 0x2b0 PLL5 Pattern register 1 */
+ u32 reserved30[3]; /* 0x2b4 */
+ u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */
+ u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */
+ u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */
+ u32 reserved31;
+ u32 ahb_reset3_cfg; /* 0x2d0 AHB1 Reset 3 config */
+ u32 reserved32; /* 0x2d4 */
+ u32 apb2_reset_cfg; /* 0x2d8 BUS Reset 4 config */
+};
+
+/* apb2 bit field */
+#define APB2_CLK_SRC_LOSC (0x0 << 24)
+#define APB2_CLK_SRC_OSC24M (0x1 << 24)
+#define APB2_CLK_SRC_PLL6 (0x2 << 24)
+#define APB2_CLK_SRC_MASK (0x3 << 24)
+#define APB2_CLK_RATE_N_1 (0x0 << 16)
+#define APB2_CLK_RATE_N_2 (0x1 << 16)
+#define APB2_CLK_RATE_N_4 (0x2 << 16)
+#define APB2_CLK_RATE_N_8 (0x3 << 16)
+#define APB2_CLK_RATE_N_MASK (3 << 16)
+#define APB2_CLK_RATE_M(m) (((m)-1) << 0)
+#define APB2_CLK_RATE_M_MASK (0x1f << 0)
+
+/* apb2 gate field */
+#define APB2_GATE_UART_SHIFT (16)
+#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT)
+#define APB2_GATE_TWI_SHIFT (0)
+#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT)
+
+/* cpu_axi_cfg bits */
+#define AXI0_DIV_SHIFT 0
+#define AXI1_DIV_SHIFT 16
+#define C0_CPUX_CLK_SRC_SHIFT 12
+#define C1_CPUX_CLK_SRC_SHIFT 28
+
+#define AXI_DIV_1 0
+#define AXI_DIV_2 1
+#define AXI_DIV_3 2
+#define AXI_DIV_4 3
+#define CPU_CLK_SRC_OSC24M 0
+#define CPU_CLK_SRC_PLL1 1
+
+#define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0xff) << 8)
+#define CCM_PLL1_CTRL_P(n) (((n) & 0x1) << 16)
+#define CCM_PLL1_CTRL_EN (0x1 << 31)
+#define CMM_PLL1_CLOCK_TIME_2 (0x2 << 24)
+
+#define PLL8_CFG_DEFAULT 0x42800
+#define CCM_CCI400_CLK_SEL_HSIC (0x2<<24)
+
+#define CCM_PLL5_DIV1_SHIFT 16
+#define CCM_PLL5_DIV2_SHIFT 18
+#define CCM_PLL5_CTRL_N(n) (((n) - 1) << 8)
+#define CCM_PLL5_CTRL_UPD (0x1 << 30)
+#define CCM_PLL5_CTRL_EN (0x1 << 31)
+
+#define PLL6_CFG_DEFAULT 0x80001900 /* 600 MHz */
+#define CCM_PLL6_CTRL_N_SHIFT 8
+#define CCM_PLL6_CTRL_N_MASK (0xff << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_DIV1_SHIFT 16
+#define CCM_PLL6_CTRL_DIV1_MASK (0x1 << CCM_PLL6_CTRL_DIV1_SHIFT)
+#define CCM_PLL6_CTRL_DIV2_SHIFT 18
+#define CCM_PLL6_CTRL_DIV2_MASK (0x1 << CCM_PLL6_CTRL_DIV2_SHIFT)
+
+#define AHB1_ABP1_DIV_DEFAULT 0x00002190
+#define AHB1_CLK_SRC_MASK (0x3<<12)
+#define AHB1_CLK_SRC_INTOSC (0x0<<12)
+#define AHB1_CLK_SRC_OSC24M (0x1<<12)
+#define AHB1_CLK_SRC_PLL6 (0x2<<12)
+
+#define AXI_GATE_OFFSET_DRAM 0
+
+/* ahb_gate0 offsets */
+#define AHB_GATE_OFFSET_USB_OHCI1 30
+#define AHB_GATE_OFFSET_USB_OHCI0 29
+#define AHB_GATE_OFFSET_USB_EHCI1 27
+#define AHB_GATE_OFFSET_USB_EHCI0 26
+#define AHB_GATE_OFFSET_USB0 24
+#define AHB_GATE_OFFSET_SPI1 21
+#define AHB_GATE_OFFSET_SPI0 20
+#define AHB_GATE_OFFSET_HSTIMER 19
+#define AHB_GATE_OFFSET_EMAC 17
+#define AHB_GATE_OFFSET_MCTL 14
+#define AHB_GATE_OFFSET_GMAC 17
+#define AHB_GATE_OFFSET_NAND0 13
+#define AHB_GATE_OFFSET_MMC0 8
+#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n))
+#define AHB_GATE_OFFSET_DMA 6
+#define AHB_GATE_OFFSET_SS 5
+
+/* ahb_gate1 offsets */
+#define AHB_GATE_OFFSET_DRC0 25
+#define AHB_GATE_OFFSET_DE_FE0 14
+#define AHB_GATE_OFFSET_DE_BE0 12
+#define AHB_GATE_OFFSET_HDMI 11
+#define AHB_GATE_OFFSET_LCD1 5
+#define AHB_GATE_OFFSET_LCD0 4
+
+#define CCM_MMC_CTRL_M(x) ((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8)
+#define CCM_MMC_CTRL_N(x) ((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x) ((x) << 20)
+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
+#define CCM_MMC_CTRL_PLL6 (0x1 << 24)
+#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+
+#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+/* There is no global phy clk gate on sun6i, define as 0 */
+#define CCM_USB_CTRL_PHYGATE 0
+#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
+#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
+#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
+
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10)
+
+#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
+
+#define CCM_DRAMCLK_CFG_DIV(x) ((x - 1) << 0)
+#define CCM_DRAMCLK_CFG_DIV_MASK (0xf << 0)
+#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8)
+#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8)
+#define CCM_DRAMCLK_CFG_UPD (0x1 << 16)
+#define CCM_DRAMCLK_CFG_RST (0x1 << 31)
+
+#define CCM_DRAMPLL_CFG_SRC_PLL5 (0x0 << 16) /* Select PLL5 (DDR0) */
+#define CCM_DRAMPLL_CFG_SRC_PLL11 (0x1 << 16) /* Select PLL11 (DDR1) */
+#define CCM_DRAMPLL_CFG_SRC_MASK (0x1 << 16)
+
+#define CCM_MBUS_RESET_RESET (0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE0 24
+#define CCM_DRAM_GATE_OFFSET_DE_FE1 25
+#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1 27
+
+
+#define MBUS_CLK_DEFAULT 0x81000002 /* PLL6 / 2 */
+
+#define MBUS_CLK_GATE (0x1 << 31)
+
+/* ahb_reset0 offsets */
+#define AHB_RESET_OFFSET_GMAC 17
+#define AHB_RESET_OFFSET_MCTL 14
+#define AHB_RESET_OFFSET_MMC3 11
+#define AHB_RESET_OFFSET_MMC2 10
+#define AHB_RESET_OFFSET_MMC1 9
+#define AHB_RESET_OFFSET_MMC0 8
+#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n))
+#define AHB_RESET_OFFSET_SS 5
+
+/* ahb_reset1 offsets */
+#define AHB_RESET_OFFSET_SAT 26
+#define AHB_RESET_OFFSET_DRC0 25
+#define AHB_RESET_OFFSET_DE_FE0 14
+#define AHB_RESET_OFFSET_DE_BE0 12
+#define AHB_RESET_OFFSET_HDMI 11
+#define AHB_RESET_OFFSET_LCD1 5
+#define AHB_RESET_OFFSET_LCD0 4
+
+/* ahb_reset2 offsets */
+#define AHB_RESET_OFFSET_LVDS 0
+
+/* apb2 reset */
+#define APB2_RESET_UART_SHIFT (16)
+#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT)
+#define APB2_RESET_TWI_SHIFT (0)
+#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT)
+
+
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll5(unsigned int clk);
+unsigned int clock_get_pll6(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN8I_A83T_H */
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index b3c1688..675876f 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -22,6 +22,8 @@
#include <asm/arch/dram_sun8i_a23.h>
#elif defined(CONFIG_MACH_SUN8I_A33)
#include <asm/arch/dram_sun8i_a33.h>
+#elif defined(CONFIG_MACH_SUN8I_A83T)
+#include <asm/arch/dram_sun8i_a83t.h>
#elif defined(CONFIG_MACH_SUN8I_H3)
#include <asm/arch/dram_sun8i_h3.h>
#else
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
new file mode 100644
index 0000000..2891b71
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
@@ -0,0 +1,201 @@
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ * Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_A83T_H
+#define _SUNXI_DRAM_SUN8I_A83T_H
+
+struct sunxi_mctl_com_reg {
+ u32 cr; /* 0x00 */
+ u32 ccr; /* 0x04 controller configuration register */
+ u32 dbgcr; /* 0x08 */
+ u8 res0[0x4]; /* 0x0c */
+ u32 mcr0_0; /* 0x10 */
+ u32 mcr1_0; /* 0x14 */
+ u32 mcr0_1; /* 0x18 */
+ u32 mcr1_1; /* 0x1c */
+ u32 mcr0_2; /* 0x20 */
+ u32 mcr1_2; /* 0x24 */
+ u32 mcr0_3; /* 0x28 */
+ u32 mcr1_3; /* 0x2c */
+ u32 mcr0_4; /* 0x30 */
+ u32 mcr1_4; /* 0x34 */
+ u32 mcr0_5; /* 0x38 */
+ u32 mcr1_5; /* 0x3c */
+ u32 mcr0_6; /* 0x40 */
+ u32 mcr1_6; /* 0x44 */
+ u32 mcr0_7; /* 0x48 */
+ u32 mcr1_7; /* 0x4c */
+ u32 mcr0_8; /* 0x50 */
+ u32 mcr1_8; /* 0x54 */
+ u32 mcr0_9; /* 0x58 */
+ u32 mcr1_9; /* 0x5c */
+ u32 mcr0_10; /* 0x60 */
+ u32 mcr1_10; /* 0x64 */
+ u32 mcr0_11; /* 0x68 */
+ u32 mcr1_11; /* 0x6c */
+ u32 mcr0_12; /* 0x70 */
+ u32 mcr1_12; /* 0x74 */
+ u32 mcr0_13; /* 0x78 */
+ u32 mcr1_13; /* 0x7c */
+ u32 mcr0_14; /* 0x80 */
+ u32 mcr1_14; /* 0x84 */
+ u32 mcr0_15; /* 0x88 */
+ u32 mcr1_15; /* 0x8c */
+ u32 bwcr; /* 0x90 */
+ u32 maer; /* 0x94 */
+ u32 mapr; /* 0x98 */
+ u32 mcgcr; /* 0x9c */
+ u32 bwctr; /* 0xa0 */
+ u8 res2[0x8]; /* 0xa4 */
+ u32 swoffr; /* 0xac */
+ u8 res3[0x10]; /* 0xb0 */
+ u32 swonr; /* 0xc0 */
+ u8 res4[0x3c]; /* 0xc4 */
+ u32 mdfscr; /* 0x100 */
+ u32 mdfsmer; /* 0x104 */
+};
+
+struct sunxi_mctl_ctl_reg {
+ u32 pir; /* 0x00 */
+ u32 pwrctl; /* 0x04 */
+ u32 mrctrl0; /* 0x08 */
+ u32 clken; /* 0x0c */
+ u32 pgsr0; /* 0x10 */
+ u32 pgsr1; /* 0x14 */
+ u32 statr; /* 0x18 */
+ u8 res1[0x14]; /* 0x1c */
+ u32 mr0; /* 0x30 */
+ u32 mr1; /* 0x34 */
+ u32 mr2; /* 0x38 */
+ u32 mr3; /* 0x3c */
+ u32 pllgcr; /* 0x40 */
+ u32 ptr0; /* 0x44 */
+ u32 ptr1; /* 0x48 */
+ u32 ptr2; /* 0x4c */
+ u32 ptr3; /* 0x50 */
+ u32 ptr4; /* 0x54 */
+ u32 dramtmg0; /* 0x58 dram timing parameters register 0 */
+ u32 dramtmg1; /* 0x5c dram timing parameters register 1 */
+ u32 dramtmg2; /* 0x60 dram timing parameters register 2 */
+ u32 dramtmg3; /* 0x64 dram timing parameters register 3 */
+ u32 dramtmg4; /* 0x68 dram timing parameters register 4 */
+ u32 dramtmg5; /* 0x6c dram timing parameters register 5 */
+ u32 dramtmg6; /* 0x70 dram timing parameters register 6 */
+ u32 dramtmg7; /* 0x74 dram timing parameters register 7 */
+ u32 dramtmg8; /* 0x78 dram timing parameters register 8 */
+ u32 odtcfg; /* 0x7c */
+ u32 pitmg0; /* 0x80 */
+ u32 pitmg1; /* 0x84 */
+ u8 res2[0x4]; /* 0x88 */
+ u32 rfshctl0; /* 0x8c */
+ u32 rfshtmg; /* 0x90 */
+ u32 rfshctl1; /* 0x94 */
+ u32 pwrtmg; /* 0x98 */
+ u8 res3[0x20]; /* 0x9c */
+ u32 dqsgmr; /* 0xbc */
+ u32 dtcr; /* 0xc0 */
+ u32 dtar0; /* 0xc4 */
+ u32 dtar1; /* 0xc8 */
+ u32 dtar2; /* 0xcc */
+ u32 dtar3; /* 0xd0 */
+ u32 dtdr0; /* 0xd4 */
+ u32 dtdr1; /* 0xd8 */
+ u32 dtmr0; /* 0xdc */
+ u32 dtmr1; /* 0xe0 */
+ u32 dtbmr; /* 0xe4 */
+ u32 catr0; /* 0xe8 */
+ u32 catr1; /* 0xec */
+ u32 dtedr0; /* 0xf0 */
+ u32 dtedr1; /* 0xf4 */
+ u8 res4[0x8]; /* 0xf8 */
+ u32 pgcr0; /* 0x100 */
+ u32 pgcr1; /* 0x104 */
+ u32 pgcr2; /* 0x108 */
+ u32 pgcr3; /* 0x10c */
+ u32 iovcr0; /* 0x110 */
+ u32 iovcr1; /* 0x114 */
+ u32 dqsdr; /* 0x118 */
+ u32 dxccr; /* 0x11c */
+ u32 odtmap; /* 0x120 */
+ u32 zqctl0; /* 0x124 */
+ u32 zqctl1; /* 0x128 */
+ u8 res6[0x14]; /* 0x12c */
+ u32 zqncr; /* 0x140 zq control register 0 */
+ u32 zqnpr; /* 0x144 zq control register 1 */
+ u32 zqndr; /* 0x148 zq control register 2 */
+ u32 zqnsr; /* 0x14c zq status register 0 */
+ u32 res7; /* 0x150 zq status register 1 */
+ u8 res8[0x6c]; /* 0x154 */
+ u32 sched; /* 0x1c0 */
+ u32 perfhpr0; /* 0x1c4 */
+ u32 perfhpr1; /* 0x1c8 */
+ u32 perflpr0; /* 0x1cc */
+ u32 perflpr1; /* 0x1d0 */
+ u32 perfwr0; /* 0x1d4 */
+ u32 perfwr1; /* 0x1d8 */
+};
+
+
+#define ZQnPR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000144 + 0x10 * x)
+#define ZQnDR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000148 + 0x10 * x)
+#define ZQnSR(x) (SUNXI_DRAM_CTL0_BASE + 0x0000014c + 0x10 * x)
+
+#define DXnGTR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000340 + 0x80 * x)
+#define DXnGCR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000344 + 0x80 * x)
+#define DXnGSR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000348 + 0x80 * x)
+#define DXnGSR1(x) (SUNXI_DRAM_CTL0_BASE + 0x0000034c + 0x80 * x)
+#define DXnGSR2(x) (SUNXI_DRAM_CTL0_BASE + 0x00000350 + 0x80 * x)
+
+#define CAIOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000210 + 0x4 * (x))
+#define DXnMDLR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000300 + 0x80 * x)
+#define DXMDLR0 (SUNXI_DRAM_CTL0_BASE + 0x00000300)
+#define DXnLCDLR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000304 + 0x80 * x)
+#define DXnLCDLR1(x) (SUNXI_DRAM_CTL0_BASE + 0x00000308 + 0x80 * x)
+#define DXnLCDLR2(x) (SUNXI_DRAM_CTL0_BASE + 0x0000030c + 0x80 * x)
+#define DATX0IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000310 + 0x4 * x)
+#define DATX1IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000390 + 0x4 * x)
+#define DATX2IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000410 + 0x4 * x)
+#define DATX3IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000490 + 0x4 * x)
+#define MX_UPD0 (SUNXI_DRAM_CTL0_BASE + 0x00000880)
+#define MX_UPD2 (SUNXI_DRAM_CTL0_BASE + 0x00000888)
+
+#define MCTL_PROTECT (SUNXI_DRAM_COM_BASE + 0x800)
+#define MCTL_MASTER_CFG0(x) (SUNXI_DRAM_COM_BASE + 0x10 + 0x8 * x)
+#define MCTL_MASTER_CFG1(x) (SUNXI_DRAM_COM_BASE + 0x14 + 0x8 * x)
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK (3 << 0)
+#define MCTL_CR_RANK(x) (((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK (3 << 2)
+#define MCTL_CR_BANK(x) ((x) << 2)
+#define MCTL_CR_ROW_MASK (0xf << 4)
+#define MCTL_CR_ROW(x) (((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK (0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x) ((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK (7 << 12)
+#define MCTL_CR_BUSW8 (0 << 12)
+#define MCTL_CR_BUSW16 (1 << 12)
+#define MCTL_CR_SEQUENCE (1 << 15)
+#define MCTL_CR_DDR3 (3 << 16)
+#define MCTL_CR_CHANNEL_MASK (1 << 19)
+#define MCTL_CR_CHANNEL(x) (((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN (0x4 << 20)
+#define MCTL_CR_CS1_CONTROL(x) ((x) << 24)
+
+/* DRAM control (sunxi_mctl_ctl_reg) register constants */
+#define MCTL_MR0 0x1c70 /* CL=11, WR=12 */
+#define MCTL_MR1 0x40
+#define MCTL_MR2 0x18 /* CWL=8 */
+#define MCTL_MR3 0x0
+
+#endif /* _SUNXI_DRAM_SUN8I_A83T_H */
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 7af5e29..a2a9a38 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -158,6 +158,7 @@
#define SUN5I_GPB_UART0 2
#define SUN8I_GPB_UART2 2
#define SUN8I_A33_GPB_UART0 3
+#define SUN8I_A83T_GPB_UART0 2
#define SUNXI_GPC_NAND 2
#define SUNXI_GPC_SDC2 3
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 2dd9d3b..9d67847 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -74,6 +74,12 @@
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
+config MACH_SUN8I_A83T
+ bool "sun8i (Allwinner A83T)"
+ select CPU_V7
+ select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
+
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
@@ -84,7 +90,7 @@
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
- default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3
+ default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
config DRAM_CLK
@@ -373,6 +379,7 @@
config VIDEO
boolean "Enable graphical uboot console on HDMI, LCD or VGA"
+ depends on !MACH_SUN8I_A83T
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1f62de7..57acc20 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -101,6 +101,11 @@
S: Maintained
F: configs/sunxi_Gemei_G9_defconfig
+H8HOMLET PROTO A83T BOARD
+M: VishnuPatekar <vishnupatekar0510@gmail.com>
+S: Maintained
+F: configs/h8_homlet_v2_defconfig
+
HUMMINGBIRD-A31 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6ac398c..386e2e0 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -430,26 +430,29 @@
int power_failed = 0;
unsigned long ramsize;
-#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
+ defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
power_failed = axp_init();
-#ifdef CONFIG_AXP221_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
#endif
power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
-#ifndef CONFIG_AXP209_POWER
+#if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER)
power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
#endif
-#ifdef CONFIG_AXP221_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
#endif
#ifdef CONFIG_AXP221_POWER
power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
#endif
+#ifndef CONFIG_AXP818_POWER
power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
-#ifndef CONFIG_AXP152_POWER
+#endif
+#if !defined(CONFIG_AXP152_POWER) && !defined(CONFIG_AXP818_POWER)
power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
#endif
#ifdef CONFIG_AXP209_POWER
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 426ee79..af96f5b 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -13,5 +13,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index ebf9614..cba2cfd 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -15,5 +15,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index 2d6736b..45cc5ab 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -19,5 +19,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_SUNXI_NO_PMIC=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index ee07c61..11691a2 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -20,6 +20,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 5008b01..b5181c6 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -14,5 +14,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index a26c3ff..e27698d 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -12,5 +12,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 41b2f8f..03481f6 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -15,5 +15,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
index 5166c06..f616388 100644
--- a/configs/A20-Olimex-SOM-EVB_defconfig
+++ b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -14,5 +14,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index 2ef2138..67bea5a 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -18,5 +18,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 38126c8..82e01ba 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -20,5 +20,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
index 60a3fec..8f1be3e 100644
--- a/configs/Auxtek-T003_defconfig
+++ b/configs/Auxtek-T003_defconfig
@@ -13,5 +13,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 1d44a74..434b007 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index f0c9d18..6cbb76c 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -14,5 +14,4 @@
CONFIG_CMD_GPIO=y
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 08fca2f..40588b9 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -16,5 +16,4 @@
CONFIG_CMD_GPIO=y
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
index 4d76ae5..78b2c51 100644
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_defconfig
@@ -12,5 +12,4 @@
CONFIG_AXP_DCDC2_VOLT=1300
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_GADGET=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index 280e70f..e027a47 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -15,6 +15,5 @@
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 2b2a239..dedf772 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -18,7 +18,6 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index e95deb1..feaeb98 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -24,5 +24,4 @@
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 7b407e7..2f5e75d 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -12,5 +12,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index ee5ab3d..a45fbb0 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index 3fe3e2b..8cbaea6 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -17,6 +17,5 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index 5af42e0..83f2004 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -16,5 +16,4 @@
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 99ad34b..45739cd 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -19,5 +19,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
index c98221f..d460c32 100644
--- a/configs/Lamobo_R1_defconfig
+++ b/configs/Lamobo_R1_defconfig
@@ -13,5 +13,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index d10e7f4..ca3b1dd 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -14,5 +14,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 81615bd..1f245e7 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -12,5 +12,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index d05b166..7e2f942 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index f04d664..32c65fb 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -9,5 +9,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index a035159..73fd4e8 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -14,4 +14,3 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 4ea1ff8..11f3203 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -18,7 +18,6 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index 5c5fabb..5689cff 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -9,5 +9,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index 0de9871..6127098 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -17,6 +17,5 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 467a267..93707e4 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index bed8afb..bfe2a29 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -17,5 +17,4 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 77de837..0ed5da1 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -15,5 +15,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index 6396ef8..fdb5ba4 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -14,5 +14,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index 067d9bd..da76226 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -17,5 +17,4 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index acd613b..1eb8094 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -12,4 +12,3 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index 501e6c6..8013359 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -10,6 +10,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index 761bfab..330ee47 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -16,5 +16,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index a52a483..4156c35 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -18,5 +18,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index d535dcc..20d3f93 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -10,4 +10,3 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig
index c83def8..a5f8e6a 100644
--- a/configs/Sinovoip_BPI_M2_defconfig
+++ b/configs/Sinovoip_BPI_M2_defconfig
@@ -16,5 +16,4 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_ALDO2_VOLT=1800
CONFIG_AXP_DLDO1_VOLT=3000
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index 63ddf94..dc71dde 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -25,5 +25,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index 3a007e1..a01b4c1 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -17,6 +17,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index 18c6fae..c3ceedb 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -17,5 +17,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig
index da9fbb0..eb1b531 100644
--- a/configs/Wobo_i5_defconfig
+++ b/configs/Wobo_i5_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index ff3bd00..cdde2bc 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -23,5 +23,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index caa942d..ce4a584 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -14,6 +14,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 67770d8..09ad330 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -23,6 +23,5 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig
index f717acf..a8d339c 100644
--- a/configs/gt90h_v4_defconfig
+++ b/configs/gt90h_v4_defconfig
@@ -22,5 +22,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig
new file mode 100644
index 0000000..dc2809a
--- /dev/null
+++ b/configs/h8_homlet_v2_defconfig
@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A83T=y
+CONFIG_DRAM_CLK=480
+CONFIG_DRAM_ZQ=15355
+CONFIG_DRAM_ODT_EN=y
+#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
+#CONFIG_USB_MUSB_HOST=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP_DCDC1_VOLT=3000
+CONFIG_AXP_DCDC2_VOLT=900
+CONFIG_AXP_DCDC3_VOLT=900
+CONFIG_AXP_DCDC4_VOLT=0
+CONFIG_AXP_DCDC5_VOLT=1500
+CONFIG_AXP_ALDO2_VOLT=0
+CONFIG_AXP_ALDO3_VOLT=0
+CONFIG_AXP_DLDO4_VOLT=0
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index ad03341..a15a15a 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -12,5 +12,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index 4969411..3f1624c 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -18,5 +18,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index ab14ac7..6c4cd56 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -18,5 +18,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 70f9e6c..00e1458 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -17,5 +17,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig
index 43b12fd..1c68293 100644
--- a/configs/inet1_defconfig
+++ b/configs/inet1_defconfig
@@ -18,6 +18,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig
index c2347b8..a7b3a9f 100644
--- a/configs/inet97fv2_defconfig
+++ b/configs/inet97fv2_defconfig
@@ -17,5 +17,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig
index 4bdd72e..c0c6cb2 100644
--- a/configs/inet98v_rev2_defconfig
+++ b/configs/inet98v_rev2_defconfig
@@ -20,5 +20,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig
index adbdd0a..0a17cf7 100644
--- a/configs/inet9f_rev03_defconfig
+++ b/configs/inet9f_rev03_defconfig
@@ -17,5 +17,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 0e140f9..443a1c7 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -12,6 +12,5 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index 249f555..07865d8 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -15,5 +15,4 @@
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index ca3bcdf..03e58cd 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -12,5 +12,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 0cb46bb..922f8c3 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_SUNXI_NO_PMIC=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index f97f893..2a359be 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -8,5 +8,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index 61f35d3..75afca9 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -12,4 +12,3 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
index cce4817..003a9c6 100644
--- a/configs/orangepi_plus_defconfig
+++ b/configs/orangepi_plus_defconfig
@@ -12,4 +12,3 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig
index 83a7b46..d9b3b45 100644
--- a/configs/pov_protab2_ips9_defconfig
+++ b/configs/pov_protab2_ips9_defconfig
@@ -18,5 +18,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig
index 36d806e..205359e 100644
--- a/configs/q8_a13_tablet_defconfig
+++ b/configs/q8_a13_tablet_defconfig
@@ -20,5 +20,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig
index 42cce87..927ab2a 100644
--- a/configs/q8_a23_tablet_800x480_defconfig
+++ b/configs/q8_a23_tablet_800x480_defconfig
@@ -22,5 +22,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig
index bd59bb3..755f4ee 100644
--- a/configs/q8_a33_tablet_1024x600_defconfig
+++ b/configs/q8_a33_tablet_1024x600_defconfig
@@ -22,5 +22,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig
index 729d4e8..a8dfa0d 100644
--- a/configs/q8_a33_tablet_800x480_defconfig
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -22,5 +22,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_SYS_NS16550=y
CONFIG_USB_MUSB_HOST=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index 2d41425..d6387fc 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -11,5 +11,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index 6315ad0..d3de194 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -15,5 +15,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_SYS_NS16550=y
CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index 53acee0..f332480 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -155,7 +155,7 @@
smaller in size than fdt_translate_address().
config SPL_OF_TRANSLATE
- bool "Translate addresses using fdt_translate_address"
+ bool "Translate addresses using fdt_translate_address in SPL"
depends on SPL_DM && SPL_OF_CONTROL
default n
help
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index bd3e078..913093d 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -1,5 +1,5 @@
config I2C_MUX
- bool "Suport I2C multiplexers"
+ bool "Support I2C multiplexers"
depends on DM_I2C
help
This enables I2C buses to be multiplexed, so that you can select
@@ -8,10 +8,10 @@
using a suitable I2C MUX driver.
config I2C_ARB_GPIO_CHALLENGE
- bool "GPIO-based I2C arbitration"
- depends on I2C_MUX
- help
- If you say yes to this option, support will be included for an
- I2C multimaster arbitration scheme using GPIOs and a challenge &
- response mechanism where masters have to claim the bus by asserting
- a GPIO.
+ bool "GPIO-based I2C arbitration"
+ depends on I2C_MUX
+ help
+ If you say yes to this option, support will be included for an
+ I2C multimaster arbitration scheme using GPIOs and a challenge &
+ response mechanism where masters have to claim the bus by asserting
+ a GPIO.
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 1936e5f..e86dd72 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -9,6 +9,7 @@
depends on ARCH_SUNXI
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
+ default AXP818_POWER if MACH_SUN8I_A83T
default SUNXI_NO_PMIC if MACH_SUN8I_H3
config SUNXI_NO_PMIC
@@ -37,22 +38,32 @@
Select this to enable support for the axp221/axp223 pmic found on most
A23 and A31 boards.
+config AXP818_POWER
+ boolean "axp818 pmic support"
+ depends on MACH_SUN8I_A83T
+ ---help---
+ Say y here to enable support for the axp818 pmic found on
+ A83T dev board.
+
endchoice
config AXP_DCDC1_VOLT
int "axp pmic dcdc1 voltage"
- depends on AXP221_POWER
+ depends on AXP221_POWER || AXP818_POWER
+ default 3300 if AXP818_POWER
default 3000 if MACH_SUN6I || MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
generic 3.3V IO voltage for external devices like the lcd-panal and
sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
- safe battery. On A31 devices dcdc1 is also used for VCC-IO.
+ safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
+ dcdc1 is used for VCC-IO, nand, usb0, sd , etc.
config AXP_DCDC2_VOLT
int "axp pmic dcdc2 voltage"
- depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
+ default 900 if AXP818_POWER
default 1400 if AXP152_POWER || AXP209_POWER
default 1200 if MACH_SUN6I
default 1100 if MACH_SUN8I
@@ -62,10 +73,12 @@
On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
+ On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
config AXP_DCDC3_VOLT
int "axp pmic dcdc3 voltage"
- depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
+ default 900 if AXP818_POWER
default 1500 if AXP152_POWER
default 1250 if AXP209_POWER
default 1200 if MACH_SUN6I || MACH_SUN8I
@@ -76,10 +89,11 @@
should be 1.25V.
On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
+ On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
config AXP_DCDC4_VOLT
int "axp pmic dcdc4 voltage"
- depends on AXP152_POWER || AXP221_POWER
+ depends on AXP152_POWER || AXP221_POWER || AXP818_POWER
default 1250 if AXP152_POWER
default 1200 if MACH_SUN6I
default 0 if MACH_SUN8I
@@ -89,15 +103,18 @@
On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
On A23 / A33 boards dcdc4 is unused and should be disabled.
+ On A83T boards dcdc4 is used for VDD-GPU.
config AXP_DCDC5_VOLT
int "axp pmic dcdc5 voltage"
- depends on AXP221_POWER
+ depends on AXP221_POWER || AXP818_POWER
+ default 1800 if AXP818_POWER
default 1500 if MACH_SUN6I || MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
disable dcdc5.
- On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V.
+ On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
+ 1.8V for A83T.
config AXP_ALDO1_VOLT
int "axp pmic (a)ldo1 voltage"
@@ -112,7 +129,7 @@
config AXP_ALDO2_VOLT
int "axp pmic (a)ldo2 voltage"
- depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
default 3000 if AXP152_POWER || AXP209_POWER
default 0 if MACH_SUN6I
default 2500 if MACH_SUN8I
@@ -126,14 +143,15 @@
config AXP_ALDO3_VOLT
int "axp pmic (a)ldo3 voltage"
- depends on AXP209_POWER || AXP221_POWER
- default 0 if AXP209_POWER
+ depends on AXP209_POWER || AXP221_POWER || AXP818_POWER
+ default 0 if AXP209_POWER || AXP818_POWER
default 3000 if MACH_SUN6I || MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
disable aldo3.
On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V.
+ On A83T aldo3 is used for LVDS, DSI, MIPI, HDMI, etc.
config AXP_ALDO4_VOLT
int "axp pmic (a)ldo4 voltage"
@@ -172,7 +190,7 @@
config AXP_DLDO4_VOLT
int "axp pmic dldo4 voltage"
- depends on AXP221_POWER
+ depends on AXP221_POWER || AXP818_POWER
default 0
---help---
Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index a2d3c04..0fdbca3 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_AXP152_POWER) += axp152.o
obj-$(CONFIG_AXP209_POWER) += axp209.o
obj-$(CONFIG_AXP221_POWER) += axp221.o
+obj-$(CONFIG_AXP818_POWER) += axp818.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c
new file mode 100644
index 0000000..4b21a83
--- /dev/null
+++ b/drivers/power/axp818.c
@@ -0,0 +1,132 @@
+/*
+ * AXP818 driver based on AXP221 driver
+ *
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnuptekar0510@gmail.com>
+ *
+ * Based on axp221.c
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pmic_bus.h>
+#include <axp_pmic.h>
+
+static u8 axp818_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+ if (mvolt < min)
+ mvolt = min;
+ else if (mvolt > max)
+ mvolt = max;
+
+ return (mvolt - min) / div;
+}
+
+int axp_set_dcdc1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp818_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+
+ if (mvolt == 0)
+ return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC1_EN);
+
+ ret = pmic_bus_write(AXP818_DCDC1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC1_EN);
+}
+
+int axp_set_dcdc2(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg;
+
+ if (mvolt >= 1220)
+ cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
+ else
+ cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
+
+ if (mvolt == 0)
+ return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC2_EN);
+
+ ret = pmic_bus_write(AXP818_DCDC2_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC2_EN);
+}
+
+int axp_set_dcdc3(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg;
+
+ if (mvolt >= 1220)
+ cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
+ else
+ cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
+
+ if (mvolt == 0)
+ return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC3_EN);
+
+ ret = pmic_bus_write(AXP818_DCDC3_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC3_EN);
+}
+
+int axp_set_dcdc5(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg;
+
+ if (mvolt >= 1140)
+ cfg = 32 + axp818_mvolt_to_cfg(mvolt, 1140, 1840, 20);
+ else
+ cfg = axp818_mvolt_to_cfg(mvolt, 800, 1120, 10);
+
+ if (mvolt == 0)
+ return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC5_EN);
+
+ ret = pmic_bus_write(AXP818_DCDC5_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+ AXP818_OUTPUT_CTRL1_DCDC5_EN);
+}
+
+int axp_init(void)
+{
+ u8 axp_chip_id;
+ int ret;
+
+ ret = pmic_bus_init();
+ if (ret)
+ return ret;
+
+ ret = pmic_bus_read(AXP818_CHIP_ID, &axp_chip_id);
+ if (ret)
+ return ret;
+
+ if (!(axp_chip_id == 0x51))
+ return -ENODEV;
+ else
+ return ret;
+
+ return 0;
+}
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 842f78b..4bf9a5c 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -64,9 +64,9 @@
}
/*
- * If the console is not marked to be bound before relocation,
- * bind it anyway.
- */
+ * If the console is not marked to be bound before relocation,
+ * bind it anyway.
+ */
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, blob, node, &dev)) {
if (!device_probe(dev)) {
@@ -77,13 +77,13 @@
}
if (!SPL_BUILD || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) {
/*
- * Try to use CONFIG_CONS_INDEX if available (it is numbered
- * from 1!).
- *
- * Failing that, get the device with sequence number 0, or in
- * extremis just the first serial device we can find. But we
- * insist on having a console (even if it is silent).
- */
+ * Try to use CONFIG_CONS_INDEX if available (it is numbered
+ * from 1!).
+ *
+ * Failing that, get the device with sequence number 0, or in
+ * extremis just the first serial device we can find. But we
+ * insist on having a console (even if it is silent).
+ */
#ifdef CONFIG_CONS_INDEX
#define INDEX (CONFIG_CONS_INDEX - 1)
#else
diff --git a/include/axp818.h b/include/axp818.h
new file mode 100644
index 0000000..1dc6456
--- /dev/null
+++ b/include/axp818.h
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * X-Powers AXP818 Power Management IC driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define AXP818_CHIP_ID 0x03
+
+#define AXP818_OUTPUT_CTRL1 0x10
+#define AXP818_OUTPUT_CTRL1_DCDC1_EN (1 << 0)
+#define AXP818_OUTPUT_CTRL1_DCDC2_EN (1 << 1)
+#define AXP818_OUTPUT_CTRL1_DCDC3_EN (1 << 2)
+#define AXP818_OUTPUT_CTRL1_DCDC4_EN (1 << 3)
+#define AXP818_OUTPUT_CTRL1_DCDC5_EN (1 << 4)
+#define AXP818_OUTPUT_CTRL1_DCDC6_EN (1 << 5)
+#define AXP818_OUTPUT_CTRL1_DCDC7_EN (1 << 6)
+#define AXP818_OUTPUT_CTRL2 0x12
+#define AXP818_OUTPUT_CTRL2_ELDO1_EN (1 << 0)
+#define AXP818_OUTPUT_CTRL2_ELDO2_EN (1 << 1)
+#define AXP818_OUTPUT_CTRL2_ELDO3_EN (1 << 2)
+#define AXP818_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
+#define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
+#define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
+#define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
+#define AXP818_OUTPUT_CTRL3 0x13
+#define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2)
+#define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3)
+#define AXP818_OUTPUT_CTRL3_FLDO3_EN (1 << 4)
+#define AXP818_OUTPUT_CTRL3_ALDO1_EN (1 << 5)
+#define AXP818_OUTPUT_CTRL3_ALDO2_EN (1 << 6)
+#define AXP818_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
+
+#define AXP818_DCDC1_CTRL 0x20
+#define AXP818_DCDC2_CTRL 0x21
+#define AXP818_DCDC3_CTRL 0x22
+#define AXP818_DCDC4_CTRL 0x23
+#define AXP818_DCDC5_CTRL 0x24
+#define AXP818_DCDC6_CTRL 0x25
+
+#define AXP818_DLDO1_CTRL 0x15
+#define AXP818_DLDO2_CTRL 0x16
+#define AXP818_DLDO3_CTRL 0x17
+#define AXP818_DLDO4_CTRL 0x18
+#define AXP818_ELDO1_CTRL 0x19
+#define AXP818_ELDO2_CTRL 0x1a
+#define AXP818_ELDO3_CTRL 0x1b
+#define AXP818_ELDO3_CTRL 0x1b
+#define AXP818_FLDO1_CTRL 0x1c
+#define AXP818_FLDO2_3_CTRL 0x1d
+#define AXP818_DCDC1_CTRL 0x20
+#define AXP818_DCDC2_CTRL 0x21
+#define AXP818_DCDC3_CTRL 0x22
+#define AXP818_DCDC4_CTRL 0x23
+#define AXP818_DCDC5_CTRL 0x24
+#define AXP818_DCDC6_CTRL 0x25
+#define AXP818_DCDC7_CTRL 0x26
+
+#define AXP818_ALDO1_CTRL 0x28
+#define AXP818_ALDO2_CTRL 0x29
+#define AXP818_ALDO3_CTRL 0x2a
+
+int axp818_init(void);
+
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS 0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
+#define AXP_GPIO0_CTRL 0x90
+#define AXP_GPIO1_CTRL 0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
+#define AXP_GPIO_STATE 0x94
+#define AXP_GPIO_STATE_OFFSET 0
diff --git a/include/axp_pmic.h b/include/axp_pmic.h
index ef339c4..3b01c49 100644
--- a/include/axp_pmic.h
+++ b/include/axp_pmic.h
@@ -16,6 +16,9 @@
#ifdef CONFIG_AXP221_POWER
#include <axp221.h>
#endif
+#ifdef CONFIG_AXP818_POWER
+#include <axp818.h>
+#endif
int axp_set_dcdc1(unsigned int mvolt);
int axp_set_dcdc2(unsigned int mvolt);
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 113e320..781ff6e 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -20,6 +20,8 @@
#define CONFIG_SUNXI_USB_PHYS 2
+
+#ifndef CONFIG_MACH_SUN8I_A83T
#define CONFIG_ARMV7_PSCI 1
#if defined(CONFIG_MACH_SUN8I_A23)
#define CONFIG_ARMV7_PSCI_NR_CPUS 2
@@ -30,6 +32,8 @@
#else
#error Unsupported sun8i variant
#endif
+#endif
+
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 98a2c74..da6ab61 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -239,7 +239,8 @@
#endif
/* PMU */
-#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
+ defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
#define CONFIG_SPL_POWER_SUPPORT
#endif
diff --git a/tools/buildman/README b/tools/buildman/README
index 10c7135..66502af 100644
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -156,7 +156,6 @@
[toolchain-alias]
x86: i386
blackfin: bfin
-sh: sh4
nds32: nds32le
openrisc: or32
@@ -341,6 +340,28 @@
- found '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc'
Tool chain test: OK
+Or download them all from kernel.org and move them to /toolchains directory,
+
+$ for i in aarch64 arm avr32 i386 m68k microblaze mips or32 powerpc sparc
+ do
+ ./tools/buildman/buildman --fetch-arch $i
+ done
+$ sudo mkdir -p /toolchains
+$ sudo mv ~/.buildman-toolchains/*/* /toolchains/
+
+For those not available from kernel.org, download from the following links.
+
+arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
+ arc_gnu_2015.06_prebuilt_uclibc_le_archs_linux_install.tar.gz
+blackfin: http://sourceforge.net/projects/adi-toolchain/files/
+ blackfin-toolchain-elf-gcc-4.5-2014R1_45-RC2.x86_64.tar.bz2
+nds32: http://osdk.andestech.com/packages/
+ nds32le-linux-glibc-v1.tgz
+nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
+ sourceryg++-2015.11-27-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
+sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
+ renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
+
Buildman should now be set up to use your new toolchain.
At the time of writing, U-Boot has these architectures: