blob: 8a472c057a98946ae30f76028b21ff0290bbdda2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2020, Compass Electronics Group, LLC
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
serial0 = &scif2;
serial1 = &hscif0;
serial2 = &hscif1;
serial3 = &scif0;
serial4 = &hscif2;
serial5 = &scif5;
spi0 = &msiof0;
spi1 = &msiof1;
spi2 = &msiof2;
spi3 = &msiof3;
ethernet0 = &avb;
};
chosen {
stdout-path = "serial0:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&reg_lcd>;
enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
pwms = <&pwm0 0 50000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
hdmi0-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi0_con: endpoint {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
};
};
keys {
compatible = "gpio-keys";
key-1 {
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "Switch-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "Switch-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "Switch-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "Switch-4";
wakeup-source;
debounce-interval = <20>;
};
key-5 {
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_5>;
label = "Switch-4";
wakeup-source;
debounce-interval = <20>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led0 {
gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
label = "LED0";
linux,default-trigger = "heartbeat";
};
led1 {
gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
label = "LED1";
linux,default-trigger = "heartbeat";
};
led2 {
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
label = "LED2";
linux,default-trigger = "heartbeat";
};
led3 {
gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
label = "LED3";
linux,default-trigger = "heartbeat";
};
};
reg_audio: regulator_audio {
compatible = "regulator-fixed";
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd: regulator-lcd {
compatible = "regulator-fixed";
regulator-name = "lcd_panel_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd_reset: regulator-lcd-reset {
compatible = "regulator-fixed";
regulator-name = "nLCD_RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_lcd>;
};
reg_cam0: regulator_camera {
compatible = "regulator-fixed";
regulator-name = "reg_cam0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_cam1: regulator_camera {
compatible = "regulator-fixed";
regulator-name = "reg_cam1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100000>;
};
sound_card {
compatible = "audio-graph-card";
label = "rcar-sound";
dais = <&rsnd_port0>, <&rsnd_port1>;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
regulator-always-on;
};
/* External DU dot clocks */
x302_clk: x302-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <33000000>;
};
x304_clk: x304-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&audio_clk_b {
clock-frequency = <22579200>;
};
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
renesas,can-clock-select = <0x0>;
status = "okay";
};
&can1 {
pinctrl-0 = <&can1_pins>;
pinctrl-names = "default";
renesas,can-clock-select = <0x0>;
status = "okay";
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&versaclock5 1>,
<&x302_clk>,
<&versaclock5 2>;
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
&ehci0 {
dr_mode = "otg";
status = "okay";
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>, <&versaclock6_bb 4>;
};
&ehci1 {
status = "okay";
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 4>;
};
&hdmi0 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dw_hdmi0_in: endpoint {
remote-endpoint = <&du_out_hdmi0>;
};
};
port@1 {
reg = <1>;
rcar_dw_hdmi0_out: endpoint {
remote-endpoint = <&hdmi0_con>;
};
};
port@2 {
/* HDMI sound */
reg = <2>;
dw_hdmi0_snd_in: endpoint {
remote-endpoint = <&rsnd_endpoint1>;
};
};
};
};
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c2 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
gpio_exp2: gpio@21 {
compatible = "onnn,pca9654";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_exp3: gpio@22 {
compatible = "onnn,pca9654";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
versaclock6_bb: versaclock6_bb@6a {
compatible = "idt,5p49v6965";
reg = <0x6a>;
#clock-cells = <1>;
clocks = <&x304_clk>;
clock-names = "xin";
/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
assigned-clocks = <&versaclock6_bb 1>,
<&versaclock6_bb 2>,
<&versaclock6_bb 3>,
<&versaclock6_bb 4>;
assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24000000>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
};
&i2c5 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c5_pins>;
pinctrl-names = "default";
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
CPVDD-supply = <&reg_audio>;
MICVDD-supply = <&reg_audio>;
PLLVDD-supply = <&reg_audio>;
SPKVDD1-supply = <&reg_audio>;
SPKVDD2-supply = <&reg_audio>;
gpio-cfg = <
0x0000 /* 0:Default */
0x0000 /* 1:Default */
0x0000 /* 2:Default */
0x0000 /* 3:Default */
0x0000 /* 4:Default */
0x0000 /* 5:Default */
>;
port {
wm8962_endpoint: endpoint {
remote-endpoint = <&rsnd_endpoint0>;
};
};
};
/* 0 - lcd_reset */
/* 1 - lcd_pwr */
/* 2 - lcd_select */
/* 3 - backlight-enable */
/* 4 - Touch_shdwn */
/* 5 - LCD_H_pol */
/* 6 - lcd_V_pol */
gpio_exp1: gpio@20 {
compatible = "onnn,pca9654";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>;
wakeup-source;
};
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&ohci1 {
status = "okay";
};
&pciec0 {
status = "okay";
};
&pciec1 {
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pfc {
can0_pins: can0 {
groups = "can0_data_a";
function = "can0";
};
can1_pins: can1 {
groups = "can1_data";
function = "can1";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
function = "du";
};
i2c2_pins: i2c2 {
groups = "i2c2_a";
function = "i2c2";
};
i2c5_pins: i2c5 {
groups = "i2c5";
function = "i2c5";
};
led_pins: leds {
/* GP_0_4 , AVS1, AVS2, GP_7_3 */
pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
bias-pull-down;
};
msiof1_pins: msiof1 {
groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
function = "msiof1";
};
pwm0_pins: pwm0 {
groups = "pwm0";
function = "pwm0";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
function = "ssi";
};
sound_clk_pins: sound_clk {
groups = "audio_clk_a_a";
function = "audio_clk";
};
usb0_pins: usb0 {
mux {
groups = "usb0";
function = "usb0";
};
};
usb1_pins: usb1 {
mux {
groups = "usb1";
function = "usb1";
};
};
usb30_pins: usb30 {
mux {
groups = "usb30";
function = "usb30";
};
};
};
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <11289600>;
status = "okay";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
<&cpg CPG_CORE R8A774A1_CLK_S0D4>;
ports {
#address-cells = <1>;
#size-cells = <0>;
rsnd_port0: port@0 {
reg = <0>;
rsnd_endpoint0: endpoint {
remote-endpoint = <&wm8962_endpoint>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint0>;
frame-master = <&rsnd_endpoint0>;
playback = <&ssi1 &dvc1 &src1>;
capture = <&ssi0>;
};
};
rsnd_port1: port@1 {
reg = <0x01>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi2>;
};
};
};
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif5 {
pinctrl-0 = <&scif5_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&ssi1 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};