binman: Allow updating entries that change size
So far we don't allow entries to change size when repacking. But this is
not very useful since it is common for entries to change size after an
updated binary is built, etc.
Add support for this, respecting the original offset/size/alignment
constraints of the image layout. For this to work the original image
must have been created with the 'allow-repack' property.
This does not support entry types with sub-entries such as files and
CBFS, but it does support sections.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/tools/binman/README b/tools/binman/README
index 1f9e137..af2a231 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -589,7 +589,9 @@
$ binman replace -i image.bin section/cbfs/u-boot
which will write the contents of the file 'u-boot' from the current directory
-to the that entry. The file must be the same size as the entry being replaced.
+to the that entry. If the entry size changes, you must add the 'allow-repack'
+property to the original image before generating it (see above), otherwise you
+will get an error.
Logging
diff --git a/tools/binman/control.py b/tools/binman/control.py
index f9680e3..c3f358d 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -118,11 +118,11 @@
return entry.ReadData(decomp)
-def WriteEntry(image_fname, entry_path, data, decomp=True):
+def WriteEntry(image_fname, entry_path, data, decomp=True, allow_resize=True):
"""Replace an entry in an image
This replaces the data in a particular entry in an image. This size of the
- new data must match the size of the old data
+ new data must match the size of the old data unless allow_resize is True.
Args:
image_fname: Image filename to process
@@ -130,18 +130,33 @@
data: Data to replace with
decomp: True to compress the data if needed, False if data is
already compressed so should be used as is
+ allow_resize: True to allow entries to change size (this does a re-pack
+ of the entries), False to raise an exception
+
+ Returns:
+ Image object that was updated
"""
tout.Info("WriteEntry '%s', file '%s'" % (entry_path, image_fname))
image = Image.FromFile(image_fname)
entry = image.FindEntryPath(entry_path)
state.PrepareFromLoadedData(image)
image.LoadData()
+
+ # If repacking, drop the old offset/size values except for the original
+ # ones, so we are only left with the constraints.
+ if allow_resize:
+ image.ResetForPack()
tout.Info('Writing data to %s' % entry.GetPath())
if not entry.WriteData(data, decomp):
- entry.Raise('Entry data size does not match, but resize is disabled')
+ if not image.allow_repack:
+ entry.Raise('Entry data size does not match, but allow-repack is not present for this image')
+ if not allow_resize:
+ entry.Raise('Entry data size does not match, but resize is disabled')
tout.Info('Processing image')
- ProcessImage(image, update_fdt=True, write_map=False, get_contents=False)
+ ProcessImage(image, update_fdt=True, write_map=False, get_contents=False,
+ allow_resize=allow_resize)
tout.Info('WriteEntry done')
+ return image
def ExtractEntries(image_fname, output_fname, outdir, entry_paths,
@@ -264,7 +279,8 @@
return images
-def ProcessImage(image, update_fdt, write_map, get_contents=True):
+def ProcessImage(image, update_fdt, write_map, get_contents=True,
+ allow_resize=True):
"""Perform all steps for this image, including checking and # writing it.
This means that errors found with a later image will be reported after
@@ -277,6 +293,8 @@
write_map: True to write a map file
get_contents: True to get the image contents from files, etc., False if
the contents is already present
+ allow_resize: True to allow entries to change size (this does a re-pack
+ of the entries), False to raise an exception
"""
if get_contents:
image.GetEntryContents()
@@ -309,6 +327,7 @@
image.SetCalculatedProperties()
for dtb_item in state.GetAllFdts():
dtb_item.Sync()
+ dtb_item.Flush()
sizes_ok = image.ProcessEntryContents()
if sizes_ok:
break
diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py
index ff3f1ae..b1810b9 100644
--- a/tools/binman/etype/fdtmap.py
+++ b/tools/binman/etype/fdtmap.py
@@ -96,10 +96,10 @@
with fsw.add_node(subnode.name):
_AddNode(subnode)
- outfdt = self.GetImage().fdtmap_dtb
+ data = state.GetFdtContents('fdtmap')[1]
# If we have an fdtmap it means that we are using this as the
- # read-only fdtmap for this image.
- if not outfdt:
+ # fdtmap for this image.
+ if data is None:
# Get the FDT data into an Fdt object
data = state.GetFdtContents()[1]
infdt = Fdt.FromData(data)
@@ -126,7 +126,8 @@
# Pack this new FDT and return its contents
fdt.pack()
outfdt = Fdt.FromData(fdt.as_bytearray())
- data = FDTMAP_MAGIC + tools.GetBytes(0, 8) + outfdt.GetContents()
+ data = outfdt.GetContents()
+ data = FDTMAP_MAGIC + tools.GetBytes(0, 8) + data
return data
def ObtainContents(self):
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index bc75189..64c6c0a 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -2724,7 +2724,8 @@
self.assertEqual(len(U_BOOT_DATA), entry.contents_size)
self.assertEqual(len(U_BOOT_DATA), entry.size)
- def _RunReplaceCmd(self, entry_name, data, decomp=True):
+ def _RunReplaceCmd(self, entry_name, data, decomp=True, allow_resize=True,
+ dts='132_replace.dts'):
"""Replace an entry in an image
This writes the entry data to update it, then opens the updated file and
@@ -2735,13 +2736,16 @@
data: Data to replace it with
decomp: True to compress the data if needed, False if data is
already compressed so should be used as is
+ allow_resize: True to allow entries to change size, False to raise
+ an exception
Returns:
Tuple:
data from entry
data from fdtmap (excluding header)
+ Image object that was modified
"""
- dtb_data = self._DoReadFileDtb('132_replace.dts', use_real_dtb=True,
+ dtb_data = self._DoReadFileDtb(dts, use_real_dtb=True,
update_dtb=True)[1]
self.assertIn('image', control.images)
@@ -2753,21 +2757,24 @@
image_fname = tools.GetOutputFilename('image.bin')
updated_fname = tools.GetOutputFilename('image-updated.bin')
tools.WriteFile(updated_fname, tools.ReadFile(image_fname))
- control.WriteEntry(updated_fname, entry_name, data, decomp)
+ image = control.WriteEntry(updated_fname, entry_name, data, decomp,
+ allow_resize)
data = control.ReadEntry(updated_fname, entry_name, decomp)
- # The DT data should not change
- new_dtb_data = entries['u-boot-dtb'].data
- self.assertEqual(new_dtb_data, orig_dtb_data)
- new_fdtmap_data = entries['fdtmap'].data
- self.assertEqual(new_fdtmap_data, orig_fdtmap_data)
+ # The DT data should not change unless resized:
+ if not allow_resize:
+ new_dtb_data = entries['u-boot-dtb'].data
+ self.assertEqual(new_dtb_data, orig_dtb_data)
+ new_fdtmap_data = entries['fdtmap'].data
+ self.assertEqual(new_fdtmap_data, orig_fdtmap_data)
- return data, orig_fdtmap_data[fdtmap.FDTMAP_HDR_LEN:]
+ return data, orig_fdtmap_data[fdtmap.FDTMAP_HDR_LEN:], image
def testReplaceSimple(self):
"""Test replacing a single file"""
expected = b'x' * len(U_BOOT_DATA)
- data, expected_fdtmap = self._RunReplaceCmd('u-boot', expected)
+ data, expected_fdtmap, _ = self._RunReplaceCmd('u-boot', expected,
+ allow_resize=False)
self.assertEqual(expected, data)
# Test that the state looks right. There should be an FDT for the fdtmap
@@ -2775,7 +2782,7 @@
# 'control' tables. Checking for an FDT that does not exist should
# return None.
path, fdtmap = state.GetFdtContents('fdtmap')
- self.assertIsNone(path)
+ self.assertIsNotNone(path)
self.assertEqual(expected_fdtmap, fdtmap)
dtb = state.GetFdtForEtype('fdtmap')
@@ -2794,7 +2801,8 @@
"""Test replacing a file by something larger"""
expected = U_BOOT_DATA + b'x'
with self.assertRaises(ValueError) as e:
- self._RunReplaceCmd('u-boot', expected)
+ self._RunReplaceCmd('u-boot', expected, allow_resize=False,
+ dts='139_replace_repack.dts')
self.assertIn("Node '/u-boot': Entry data size does not match, but resize is disabled",
str(e.exception))
@@ -2806,7 +2814,8 @@
updated_fname = tools.GetOutputFilename('image-updated.bin')
tools.WriteFile(updated_fname, data)
entry_name = 'u-boot'
- control.WriteEntry(updated_fname, entry_name, expected)
+ control.WriteEntry(updated_fname, entry_name, expected,
+ allow_resize=False)
data = control.ReadEntry(updated_fname, entry_name)
self.assertEqual(expected, data)
@@ -2818,7 +2827,8 @@
updated_fname = tools.GetOutputFilename('first-updated.bin')
tools.WriteFile(updated_fname, tools.ReadFile(image_fname))
entry_name = 'u-boot'
- control.WriteEntry(updated_fname, entry_name, expected)
+ control.WriteEntry(updated_fname, entry_name, expected,
+ allow_resize=False)
data = control.ReadEntry(updated_fname, entry_name)
self.assertEqual(expected, data)
@@ -2911,6 +2921,37 @@
"""Test an image header at the end of an image with undefined size"""
self._DoReadFileRealDtb('138_fdtmap_hdr_nosize.dts')
+ def testReplaceResize(self):
+ """Test replacing a single file in an entry with a larger file"""
+ expected = U_BOOT_DATA + b'x'
+ data, _, image = self._RunReplaceCmd('u-boot', expected,
+ dts='139_replace_repack.dts')
+ self.assertEqual(expected, data)
+
+ entries = image.GetEntries()
+ dtb_data = entries['u-boot-dtb'].data
+ dtb = fdt.Fdt.FromData(dtb_data)
+ dtb.Scan()
+
+ # The u-boot section should now be larger in the dtb
+ node = dtb.GetNode('/binman/u-boot')
+ self.assertEqual(len(expected), fdt_util.GetInt(node, 'size'))
+
+ # Same for the fdtmap
+ fdata = entries['fdtmap'].data
+ fdtb = fdt.Fdt.FromData(fdata[fdtmap.FDTMAP_HDR_LEN:])
+ fdtb.Scan()
+ fnode = fdtb.GetNode('/u-boot')
+ self.assertEqual(len(expected), fdt_util.GetInt(fnode, 'size'))
+
+ def testReplaceResizeNoRepack(self):
+ """Test replacing an entry with a larger file when not allowed"""
+ expected = U_BOOT_DATA + b'x'
+ with self.assertRaises(ValueError) as e:
+ self._RunReplaceCmd('u-boot', expected)
+ self.assertIn('Entry data size does not match, but allow-repack is not present for this image',
+ str(e.exception))
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/image.py b/tools/binman/image.py
index fd4f504..7b39a1d 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -97,12 +97,13 @@
fdt_data = fdtmap_data[fdtmap.FDTMAP_HDR_LEN:]
out_fname = tools.GetOutputFilename('fdtmap.in.dtb')
tools.WriteFile(out_fname, fdt_data)
- dtb = fdt.Fdt.FromData(fdt_data, out_fname)
+ dtb = fdt.Fdt(out_fname)
dtb.Scan()
# Return an Image with the associated nodes
root = dtb.GetRoot()
image = Image('image', root, copy_to_orig=False)
+
image.image_node = fdt_util.GetString(root, 'image-node', 'image')
image.fdtmap_dtb = dtb
image.fdtmap_data = fdtmap_data
diff --git a/tools/binman/state.py b/tools/binman/state.py
index 2379e24..6553615 100644
--- a/tools/binman/state.py
+++ b/tools/binman/state.py
@@ -249,6 +249,7 @@
if for_repack and entry.etype != 'u-boot-dtb':
continue
other_node = dtb.GetNode(fdt_path_prefix + node.path)
+ #print(' try', fdt_path_prefix + node.path, other_node)
if other_node:
yield other_node
@@ -300,7 +301,7 @@
"""
for n in GetUpdateNodes(node, for_repack):
tout.Detail("File %s: Update node '%s' prop '%s' to %#x" %
- (node.GetFdt().name, node.path, prop, value))
+ (n.GetFdt().name, n.path, prop, value))
n.SetInt(prop, value)
def CheckAddHashProp(node):
diff --git a/tools/binman/test/139_replace_repack.dts b/tools/binman/test/139_replace_repack.dts
new file mode 100644
index 0000000..a3daf6f
--- /dev/null
+++ b/tools/binman/test/139_replace_repack.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <0xc00>;
+ allow-repack;
+ u-boot {
+ };
+ fdtmap {
+ };
+ u-boot-dtb {
+ };
+ image-header {
+ location = "end";
+ };
+ };
+};