ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
Currently the NOR & NAND support in Linux only works for the "standard"
Sequoia, the version booting for NOR flash. The NAND-booting version
has the chip-selects swapped. Here the chip-select mappings:
"Standard" NOR-booting version:
CS0 NOR
CS3 NAND
NAND-booting version:
CS0 NAND
CS3 NOR
With this path the dtb gets fixed-up, so that the correct chip-select
numbers are patched in the dtb enabling correct NOR & NAND support
in Linux on the NAND-booting Sequoia version.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index d6668e2..e824b8f 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006-2007
+ * (C) Copyright 2006-2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
@@ -35,7 +35,8 @@
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-ulong flash_get_size (ulong base, int banknum);
+extern void __ft_board_setup(void *blob, bd_t *bd);
+ulong flash_get_size(ulong base, int banknum);
int board_early_init_f(void)
{
@@ -513,3 +514,56 @@
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
+
+#if defined(CONFIG_NAND_U_BOOT)
+/*
+ * On NAND-booting sequoia, we need to patch the chips select numbers
+ * in the dtb (CS0 - NAND, CS3 - NOR)
+ */
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+ int len;
+ int nodeoffset;
+ struct fdt_property *prop;
+ u32 *reg;
+ char path[32];
+
+ /* First do common fdt setup */
+ __ft_board_setup(blob, bd);
+
+ /* And now configure NOR chip select to 3 instead of 0 */
+ strcpy(path, "/plb/opb/ebc/nor_flash@0,0");
+ nodeoffset = fdt_path_offset(blob, path);
+ prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
+ if (prop == NULL) {
+ printf("Unable to update NOR chip select for NAND booting\n");
+ return;
+ }
+ reg = (u32 *)&prop->data[0];
+ reg[0] = 3;
+ rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
+ if (rc) {
+ printf("Unable to update property NOR mappings, err=%s\n",
+ fdt_strerror(rc));
+ return;
+ }
+
+ /* And now configure NAND chip select to 0 instead of 3 */
+ strcpy(path, "/plb/opb/ebc/ndfc@3,0");
+ nodeoffset = fdt_path_offset(blob, path);
+ prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
+ if (prop == NULL) {
+ printf("Unable to update NDFC chip select for NAND booting\n");
+ return;
+ }
+ reg = (u32 *)&prop->data[0];
+ reg[0] = 0;
+ rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
+ if (rc) {
+ printf("Unable to update property NDFC mappings, err=%s\n",
+ fdt_strerror(rc));
+ return;
+ }
+}
+#endif /* CONFIG_NAND_U_BOOT */