ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS
These two macros are used for the same thing, the total number of DDR
controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and
merge existing usage.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index d180c73..cc30fa6 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -482,17 +482,17 @@
int i, j, k, m;
u8 *p_8;
u32 *p_32;
- struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+ struct ccsr_ddr __iomem *ddr[CONFIG_SYS_NUM_DDR_CTLRS];
generic_spd_eeprom_t
- spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
+ spd[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR];
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++)
fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
puts("SPD data of all dimms (zero value is omitted)...\n");
puts("Byte (hex) ");
k = 1;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++)
printf("Dimm%d ", k++);
}
@@ -500,7 +500,7 @@
for (k = 0; k < sizeof(generic_spd_eeprom_t); k++) {
m = 0;
printf("%3d (0x%02x) ", k, k);
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
p_8 = (u8 *) &spd[i][j];
if (p_8[k]) {
@@ -516,22 +516,22 @@
puts("\r");
}
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
switch (i) {
case 0:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
case 1:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
case 2:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
case 3:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
@@ -545,13 +545,13 @@
printf("DDR registers dump for all controllers "
"(zero value is omitted)...\n");
puts("Offset (hex) ");
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
puts("\n");
for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
m = 0;
printf("%6d (0x%04x)", k * 4, k * 4);
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
p_32 = (u32 *) ddr[i];
if (p_32[k]) {
printf(" 0x%08x", p_32[k]);
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 4dff5c8..822844d 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -378,10 +378,10 @@
u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28);
u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40);
u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60);
u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68);
#endif
@@ -409,25 +409,25 @@
ddr_pll_ratio >>= 1;
setbits_be32(plldadcr1, 0x02000001);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
setbits_be32(plldadcr2, 0x02000001);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
setbits_be32(plldadcr3, 0x02000001);
#endif
#endif
setbits_be32(dpdovrcr4, 0xe0000000);
out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
#endif
#endif
udelay(100);
clrbits_be32(plldadcr1, 0x02000001);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
clrbits_be32(plldadcr2, 0x02000001);
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
clrbits_be32(plldadcr3, 0x02000001);
#endif
#endif