net: mvgbe: extract common code for SMI wait
Combine repeated code from smi_reg_read/smi_reg_write into a common
function smi_wait_ready.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index 4e1aff6..e6585ef 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -15,6 +15,7 @@
#include <net.h>
#include <malloc.h>
#include <miiphy.h>
+#include <wait_bit.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/types.h>
@@ -40,10 +41,24 @@
#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
#if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+static int smi_wait_ready(struct mvgbe_device *dmvgbe)
+{
+ int ret;
+
+ ret = wait_for_bit_le32(&MVGBE_SMI_REG, MVGBE_PHY_SMI_BUSY_MASK, false,
+ MVGBE_PHY_SMI_TIMEOUT_MS, false);
+ if (ret) {
+ printf("Error: SMI busy timeout\n");
+ return ret;
+ }
+
+ return 0;
+}
+
/*
* smi_reg_read - miiphy_read callback function.
*
- * Returns 16bit phy register value, or 0xffff on error
+ * Returns 16bit phy register value, or -EFAULT on error
*/
static int smi_reg_read(struct mii_dev *bus, int phy_adr, int devad,
int reg_ofs)
@@ -74,16 +89,9 @@
return -EFAULT;
}
- timeout = MVGBE_PHY_SMI_TIMEOUT;
/* wait till the SMI is not busy */
- do {
- /* read smi register */
- smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
- if (timeout-- == 0) {
- printf("Err..(%s) SMI busy timeout\n", __func__);
- return -EFAULT;
- }
- } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
+ if (smi_wait_ready(dmvgbe) < 0)
+ return -EFAULT;
/* fill the phy address and regiser offset and read opcode */
smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
@@ -119,10 +127,9 @@
}
/*
- * smi_reg_write - imiiphy_write callback function.
+ * smi_reg_write - miiphy_write callback function.
*
- * Returns 0 if write succeed, -EINVAL on bad parameters
- * -ETIME on timeout
+ * Returns 0 if write succeed, -EFAULT on error
*/
static int smi_reg_write(struct mii_dev *bus, int phy_adr, int devad,
int reg_ofs, u16 data)
@@ -131,7 +138,6 @@
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
struct mvgbe_registers *regs = dmvgbe->regs;
u32 smi_reg;
- u32 timeout;
/* Phyadr write request*/
if (phy_adr == MV_PHY_ADR_REQUEST &&
@@ -147,19 +153,12 @@
}
if (reg_ofs > PHYREG_MASK) {
printf("Err..(%s) Invalid register offset\n", __func__);
- return -EINVAL;
+ return -EFAULT;
}
/* wait till the SMI is not busy */
- timeout = MVGBE_PHY_SMI_TIMEOUT;
- do {
- /* read smi register */
- smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
- if (timeout-- == 0) {
- printf("Err..(%s) SMI busy timeout\n", __func__);
- return -ETIME;
- }
- } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
+ if (smi_wait_ready(dmvgbe) < 0)
+ return -EFAULT;
/* fill the phy addr and reg offset and write opcode and data */
smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS);