Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/clock/amlogic,meson8b-clkc.txt b/Bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 0000000..cc51e47
--- /dev/null
+++ b/Bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,51 @@
+* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
+
+The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
+supplies clock to various controllers within the SoC.
+
+Required Properties:
+
+- compatible: must be one of:
+ - "amlogic,meson8-clkc" for Meson8 (S802) SoCs
+ - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
+ - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+ * "xtal": the 24MHz system oscillator
+ * "ddr_pll": the DDR PLL clock
+ * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
+Example: Clock controller node:
+
+ clkc: clock-controller {
+ compatible = "amlogic,meson8b-clkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ };