Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/display/panel/abt,y030xx067a.yaml b/Bindings/display/panel/abt,y030xx067a.yaml
new file mode 100644
index 0000000..acd2f3f
--- /dev/null
+++ b/Bindings/display/panel/abt,y030xx067a.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: abt,y030xx067a
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "abt,y030xx067a";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/advantech,idk-1110wr.yaml b/Bindings/display/panel/advantech,idk-1110wr.yaml
new file mode 100644
index 0000000..f6fea90
--- /dev/null
+++ b/Bindings/display/panel/advantech,idk-1110wr.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: advantech,idk-1110wr
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: advantech,idk-1110wr
+ - const: panel-lvds
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 223
+
+ height-mm:
+ const: 125
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+ panel {
+ compatible = "advantech,idk-1110wr", "panel-lvds";
+
+ width-mm = <223>;
+ height-mm = <125>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1024x600 @60Hz */
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <240>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ vsync-len = <10>;
+ vfront-porch = <15>;
+ vback-porch = <10>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/advantech,idk-2121wr.yaml b/Bindings/display/panel/advantech,idk-2121wr.yaml
new file mode 100644
index 0000000..2e8dbdb
--- /dev/null
+++ b/Bindings/display/panel/advantech,idk-2121wr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
+ A dual-LVDS interface is a dual-link connection with even pixels traveling
+ on one link, and with odd pixels traveling on the other link.
+
+ The panel expects odd pixels on the first port, and even pixels on the
+ second port, therefore the ports must be marked accordingly (with either
+ dual-lvds-odd-pixels or dual-lvds-even-pixels).
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: advantech,idk-2121wr
+ - {} # panel-lvds, but not listed here to avoid false select
+
+ width-mm:
+ const: 476
+
+ height-mm:
+ const: 268
+
+ data-mapping:
+ const: vesa-24
+
+ panel-timing: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The sink for odd pixels.
+ properties:
+ dual-lvds-odd-pixels: true
+
+ required:
+ - dual-lvds-odd-pixels
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The sink for even pixels.
+ properties:
+ dual-lvds-even-pixels: true
+
+ required:
+ - dual-lvds-even-pixels
+
+ required:
+ - port@0
+ - port@1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - width-mm
+ - height-mm
+ - data-mapping
+ - panel-timing
+ - ports
+
+examples:
+ - |+
+ panel-lvds {
+ compatible = "advantech,idk-2121wr", "panel-lvds";
+
+ width-mm = <476>;
+ height-mm = <268>;
+
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <44>;
+ hfront-porch = <88>;
+ hback-porch = <148>;
+ vfront-porch = <4>;
+ vback-porch = <36>;
+ vsync-len = <5>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+ panel_in0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+ panel_in1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/arm,rtsm-display.yaml b/Bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 0000000..4ad484f
--- /dev/null
+++ b/Bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: arm,rtsm-display
+
+ port: true
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/arm,versatile-tft-panel.yaml b/Bindings/display/panel/arm,versatile-tft-panel.yaml
new file mode 100644
index 0000000..c9958f8
--- /dev/null
+++ b/Bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ These panels are connected to the daughterboards found on the
+ ARM Versatile reference designs.
+
+ This device node must appear as a child to a "syscon"-compatible
+ node.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: arm,versatile-tft-panel
+
+ port: true
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ sysreg@0 {
+ compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+ reg = <0x00000 0x1000>;
+
+ panel {
+ compatible = "arm,versatile-tft-panel";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&foo>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/armadeus,st0700-adapt.yaml b/Bindings/display/panel/armadeus,st0700-adapt.yaml
new file mode 100644
index 0000000..a6ade47
--- /dev/null
+++ b/Bindings/display/panel/armadeus,st0700-adapt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/armadeus,st0700-adapt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armadeus ST0700 Adapter
+
+description:
+ A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with an adapter board.
+
+maintainers:
+ - '"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>'
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: armadeus,st0700-adapt
+
+ power-supply: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
new file mode 100644
index 0000000..75a09df
--- /dev/null
+++ b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
+
+maintainers:
+ - Konrad Dybcio <konradybcio@gmail.com>
+
+description: |+
+ This panel seems to only be found in the Asus Z00T
+ smartphone and we have no straightforward way of
+ actually getting the correct model number,
+ as no schematics are released publicly.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: asus,z00t-tm5p5-n35596
+ reg: true
+ reset-gpios: true
+ vdd-supply:
+ description: core voltage supply
+ vddio-supply:
+ description: vddio supply
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ reg = <0>;
+
+ compatible = "asus,z00t-tm5p5-n35596";
+
+ vdd-supply = <&pm8916_l8>;
+ vddio-supply = <&pm8916_l6>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Bindings/display/panel/auo,a030jtn01.yaml b/Bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 0000000..86c834e
--- /dev/null
+++ b/Bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+ Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: auo,a030jtn01
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "auo,a030jtn01";
+ reg = <0>;
+
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&lcd_power>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/bananapi,s070wv20-ct16.yaml b/Bindings/display/panel/bananapi,s070wv20-ct16.yaml
new file mode 100644
index 0000000..bbf127f
--- /dev/null
+++ b/Bindings/display/panel/bananapi,s070wv20-ct16.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/bananapi,s070wv20-ct16.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: bananapi,s070wv20-ct16
+
+ power-supply: true
+ backlight: true
+ enable-gpios: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/Bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 0000000..a8f3afa
--- /dev/null
+++ b/Bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+ This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+ video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+ pixel arrangement, 63 micrometers pitch, with an active
+ area of 68.04 x 136.08 millimeters.
+ Each pixel is divided into red and green dots, or blue and
+ green dots, and two pixels share red or blue dots which are
+ arranged in vertical stripe.
+ The DriverIC for this panel module is SW43404.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: boe,bf060y8m-aj0
+
+ elvdd-supply:
+ description: EL Driving positive (VDD) supply (4.40-4.80V)
+ elvss-supply:
+ description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+ vcc-supply:
+ description: Core (TSP) voltage supply (2.70-3.60V)
+ vci-supply:
+ description: DriverIC Operation supply (2.60-3.60V)
+ vddio-supply:
+ description: I/O voltage supply (1.62-1.98V)
+
+ port: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - elvdd-supply
+ - elvss-supply
+ - vcc-supply
+ - vci-supply
+ - vddio-supply
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,bf060y8m-aj0";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+ vcc-supply = <&disp_vcc_vreg>;
+ vddio-supply = <&disp_vddio_vreg>;
+ vci-supply = <&disp_vci_vreg>;
+ elvdd-supply = <&disp_elvdd_vreg>;
+ elvss-supply = <&disp_elvss_vreg>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/boe,himax8279d.yaml b/Bindings/display/panel/boe,himax8279d.yaml
new file mode 100644
index 0000000..272a3a0
--- /dev/null
+++ b/Bindings/display/panel/boe,himax8279d.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+ - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: boe,himax8279d8p
+ - const: boe,himax8279d10p
+
+ backlight: true
+ enable-gpios: true
+ reg: true
+
+ pp33-gpios:
+ maxItems: 1
+ description: GPIO for the 3.3v pin that provides the supply voltage
+
+ pp18-gpios:
+ maxItems: 1
+ description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp33-gpios
+ - pp18-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/boe,tv101wum-nl6.yaml b/Bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 0000000..906ef62
--- /dev/null
+++ b/Bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+ - boe,tv101wum-nl6
+ # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+ - auo,kd101n80-45na
+ # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+ - boe,tv101wum-n53
+ # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+ - auo,b101uan08.3
+ # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+ - boe,tv105wum-nw0
+ # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+ - boe,tv110c9m-ll3
+ # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+ - innolux,hj110iz-01a
+ # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+ - starry,2081101qfh032011-53g
+ # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+ - starry,himax83102-j02
+ # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+ - starry,ili9882t
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ pp3300-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight:
+ description: phandle of the backlight device attached to the panel
+
+ port: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,tv101wum-nl6";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/display-timing.txt b/Bindings/display/panel/display-timing.txt
new file mode 100644
index 0000000..7f55ad4
--- /dev/null
+++ b/Bindings/display/panel/display-timing.txt
@@ -0,0 +1 @@
+See display-timings.yaml in this directory.
diff --git a/Bindings/display/panel/display-timings.yaml b/Bindings/display/panel/display-timings.yaml
new file mode 100644
index 0000000..dc5f7e3
--- /dev/null
+++ b/Bindings/display/panel/display-timings.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timings
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ A display panel may be able to handle several display timings,
+ with different resolutions.
+ The display-timings node makes it possible to specify the timings
+ and to specify the timing that is native for the display.
+
+properties:
+ $nodename:
+ const: display-timings
+
+ native-mode:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ The default display timing is the one specified as native-mode.
+ If no native-mode is specified then the first node is assumed
+ to be the native mode.
+
+patternProperties:
+ "^timing":
+ type: object
+ $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+ - |+
+
+ /*
+ * Example that specifies panel timing using minimum, typical,
+ * maximum values as commonly used in datasheet description.
+ * timing1 is the native-mode.
+ */
+ display-timings {
+ native-mode = <&timing1>;
+ timing0 {
+ /* 1920x1080p24 */
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <0 44 60>;
+ hfront-porch = <80 88 95>;
+ hback-porch = <100 148 160>;
+ vfront-porch = <0 4 6>;
+ vback-porch = <0 36 50>;
+ vsync-len = <0 5 6>;
+ };
+ timing1 {
+ /* 1920x1080p24 */
+ clock-frequency = <52000000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <25>;
+ hback-porch = <25>;
+ hsync-len = <0 25 25>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/dlc,dlc0700yzg-1.yaml b/Bindings/display/panel/dlc,dlc0700yzg-1.yaml
new file mode 100644
index 0000000..287e2fe
--- /dev/null
+++ b/Bindings/display/panel/dlc,dlc0700yzg-1.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/dlc,dlc0700yzg-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: dlc,dlc0700yzg-1
+
+ reset-gpios: true
+ enable-gpios: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/ebbg,ft8719.yaml b/Bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 0000000..80deedc
--- /dev/null
+++ b/Bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+ - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+ The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+ of 1080x2246. It is a video mode DSI panel. The backlight is managed
+ through the QCOM WLED driver.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: ebbg,ft8719
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel of the peripheral
+
+ vddio-supply:
+ description: power IC supply regulator
+
+ vddpos-supply:
+ description: positive boost supply regulator
+
+ vddneg-supply:
+ description: negative boost supply regulator
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vddpos-supply
+ - vddneg-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "ebbg,ft8719";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ backlight = <&pmi8998_wled>;
+
+ port {
+ ebbg_ft8719_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/elida,kd35t133.yaml b/Bindings/display/panel/elida,kd35t133.yaml
new file mode 100644
index 0000000..265ab6d
--- /dev/null
+++ b/Bindings/display/panel/elida,kd35t133.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: elida,kd35t133
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios: true
+ rotation: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vdd-supply:
+ description: regulator that supplies the vdd voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - port
+ - iovcc-supply
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "elida,kd35t133";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vdd-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/feixin,k101-im2ba02.yaml b/Bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 0000000..81adb82
--- /dev/null
+++ b/Bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+ - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: feixin,k101-im2ba02
+ reg: true
+ backlight: true
+ reset-gpios: true
+ avdd-supply:
+ description: regulator that supplies the AVDD voltage
+ dvdd-supply:
+ description: regulator that supplies the DVDD voltage
+ cvdd-supply:
+ description: regulator that supplies the CVDD voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+ - cvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <®_dc1sw>;
+ dvdd-supply = <®_dc1sw>;
+ cvdd-supply = <®_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 0000000..92df69e
--- /dev/null
+++ b/Bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: feiyang,fy07024di26a30d
+
+ reg:
+ description: DSI virtual channel used by that screen
+ maxItems: 1
+
+ avdd-supply:
+ description: analog regulator dc1 switch
+
+ dvdd-supply:
+ description: 3v3 digital regulator
+
+ port: true
+ reset-gpios: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "feiyang,fy07024di26a30d";
+ reg = <0>;
+ avdd-supply = <®_dc1sw>;
+ dvdd-supply = <®_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/focaltech,gpt3.yaml b/Bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 0000000..d54e96b
--- /dev/null
+++ b/Bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: focaltech,gpt3
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "focaltech,gpt3";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/himax,hx8394.yaml b/Bindings/display/panel/himax,hx8394.yaml
new file mode 100644
index 0000000..ffb3528
--- /dev/null
+++ b/Bindings/display/panel/himax,hx8394.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Ondrej Jirman <megi@xff.cz>
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+ Device tree bindings for panels based on the Himax HX8394 controller,
+ such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+ a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - hannstar,hsd060bhw4
+ - const: himax,hx8394
+
+ reg: true
+
+ reset-gpios: true
+
+ backlight: true
+
+ port: true
+
+ vcc-supply:
+ description: Panel power supply
+
+ iovcc-supply:
+ description: I/O voltage supply
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - backlight
+ - port
+ - vcc-supply
+ - iovcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+ reg = <0>;
+ vcc-supply = <®_2v8_p>;
+ iovcc-supply = <®_1v8_p>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9163.yaml b/Bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 0000000..3cabbba
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+ - Daniel Mack <daniel@zonque.org>
+
+description:
+ This binding is for display panels using an Ilitek ILI9163 controller in SPI
+ mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - newhaven,1.8-128160EF
+ - const: ilitek,ili9163
+
+ spi-max-frequency:
+ maximum: 32000000
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX)
+
+ backlight: true
+ reg: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <180>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9322.yaml b/Bindings/display/panel/ilitek,ili9322.yaml
new file mode 100644
index 0000000..7d221ef
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9322.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This is a driver for 320x240 TFT panels, accepting a variety of input
+ streams that get adapted and scaled to the panel. The panel output has
+ 960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+ VCOMH outputs.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - dlink,dir-685-panel
+ - const: ilitek,ili9322
+
+ reset-gpios: true
+ port: true
+
+ vcc-supply:
+ description: Core voltage supply
+
+ iovcc-supply:
+ description: Voltage supply for the interface input/output signals
+
+ vci-supply:
+ description: Voltage supply for analog parts
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: display@0 {
+ compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+ reg = <0>;
+ vcc-supply = <&vdisp>;
+ iovcc-supply = <&vdisp>;
+ vci-supply = <&vdisp>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9341.yaml b/Bindings/display/panel/ilitek,ili9341.yaml
new file mode 100644
index 0000000..94f169e
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9341.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+ - Dillon Min <dillon.minfei@gmail.com>
+
+description: |
+ Ilitek ILI9341 TFT panel driver with SPI control bus
+ This is a driver for 320x240 TFT panels, accepting a rgb input
+ streams with 16 bits or 18 bits.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - adafruit,yx240qv29
+ # ili9341 240*320 Color on stm32f429-disco board
+ - st,sf-tc240t-9370-t
+ - canaan,kd233-tft
+ - const: ilitek,ili9341
+
+ reg: true
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX) of this DBI panel
+
+ spi-3wire: true
+
+ spi-max-frequency:
+ const: 10000000
+
+ port: true
+
+ vci-supply:
+ description: Analog voltage supply (2.5 .. 3.3V)
+
+ vddi-supply:
+ description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+ vddi-led-supply:
+ description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,sf-tc240t-9370-t
+then:
+ required:
+ - port
+
+examples:
+ - |+
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: display@0 {
+ compatible = "st,sf-tc240t-9370-t",
+ "ilitek,ili9341";
+ reg = <0>;
+ spi-3wire;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpiod 13 0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ display@1{
+ compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ backlight = <&backlight>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/ilitek,ili9881c.yaml b/Bindings/display/panel/ilitek,ili9881c.yaml
new file mode 100644
index 0000000..e7ab622
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9881c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - bananapi,lhr050h41
+ - feixin,k101-im2byl02
+ - tdo,tl050hdv35
+ - wanchanglong,w552946aba
+ - const: ilitek,ili9881c
+
+ backlight: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - power-supply
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <®_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&pwm_bl>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/innolux,ee101ia-01d.yaml b/Bindings/display/panel/innolux,ee101ia-01d.yaml
new file mode 100644
index 0000000..ab6b7be
--- /dev/null
+++ b/Bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ee101ia-01d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@bq.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: innolux,ee101ia-01d
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: innolux,ee101ia-01d
+ - const: panel-lvds
+
+ backlight: true
+ data-mapping: true
+ enable-gpios: true
+ power-supply: true
+ width-mm: true
+ height-mm: true
+ panel-timing: true
+ port: true
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+additionalProperties: false
+...
diff --git a/Bindings/display/panel/innolux,ej030na.yaml b/Bindings/display/panel/innolux,ej030na.yaml
new file mode 100644
index 0000000..72788e3
--- /dev/null
+++ b/Bindings/display/panel/innolux,ej030na.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: innolux,ej030na
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "innolux,ej030na";
+ reg = <0>;
+
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&lcd_power>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/innolux,p097pfg.yaml b/Bindings/display/panel/innolux,p097pfg.yaml
new file mode 100644
index 0000000..5a5f071
--- /dev/null
+++ b/Bindings/display/panel/innolux,p097pfg.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+ - Lin Huang <hl@rock-chips.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: innolux,p097pfg
+
+ backlight: true
+ enable-gpios: true
+ reg: true
+
+ avdd-supply:
+ description: The regulator that provides positive voltage
+
+ avee-supply:
+ description: The regulator that provides negative voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - avee-supply
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "innolux,p097pfg";
+ reg = <0>;
+ avdd-supply = <&avdd>;
+ avee-supply = <&avee>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jadard,jd9365da-h3.yaml b/Bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 0000000..41eb7fb
--- /dev/null
+++ b/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+ - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - chongzhou,cz101b4001
+ - radxa,display-10hd-ad001
+ - radxa,display-8hd-ad002
+ - const: jadard,jd9365da-h3
+
+ reg: true
+
+ vdd-supply:
+ description: supply regulator for VDD, usually 3.3V
+
+ vccio-supply:
+ description: supply regulator for VCCIO, usually 1.8V
+
+ reset-gpios: true
+
+ backlight: true
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vccio-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+ reg = <0>;
+ vdd-supply = <&lcd_3v3>;
+ vccio-supply = <&vcca_1v8>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jdi,lpm102a188a.yaml b/Bindings/display/panel/jdi,lpm102a188a.yaml
new file mode 100644
index 0000000..2f4d27a
--- /dev/null
+++ b/Bindings/display/panel/jdi,lpm102a188a.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI LPM102A188A 2560x1800 10.2" DSI Panel
+
+maintainers:
+ - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
+
+description: |
+ This panel requires a dual-channel DSI host to operate. It supports two modes:
+ - left-right: each channel drives the left or right half of the screen
+ - even-odd: each channel drives the even or odd lines of the screen
+
+ Each of the DSI channels controls a separate DSI peripheral. The peripheral
+ driven by the first link (DSI-LINK1) is considered the primary peripheral
+ and controls the device. The 'link2' property contains a phandle to the
+ peripheral driven by the second link (DSI-LINK2).
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: jdi,lpm102a188a
+
+ reg: true
+ enable-gpios: true
+ reset-gpios: true
+ power-supply: true
+ backlight: true
+
+ ddi-supply:
+ description: The regulator that provides IOVCC (1.8V).
+
+ link2:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the DSI peripheral on the secondary link. Note that the
+ presence of this property marks the containing node as DSI-LINK1.
+
+required:
+ - compatible
+ - reg
+
+if:
+ required:
+ - link2
+then:
+ required:
+ - power-supply
+ - ddi-supply
+ - enable-gpios
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+
+ dsia: dsi@54300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x54300000 0x0 0x00040000>;
+
+ link2: panel@0 {
+ compatible = "jdi,lpm102a188a";
+ reg = <0>;
+ };
+ };
+
+ dsib: dsi@54400000{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x54400000 0x0 0x00040000>;
+ nvidia,ganged-mode = <&dsia>;
+
+ link1: panel@0 {
+ compatible = "jdi,lpm102a188a";
+ reg = <0>;
+ power-supply = <&pplcd_vdd>;
+ ddi-supply = <&pp1800_lcdio>;
+ enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ link2 = <&link2>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jdi,lt070me05000.yaml b/Bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 0000000..63c82a4
--- /dev/null
+++ b/Bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+ - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: jdi,lt070me05000
+
+ enable-gpios: true
+ reg: true
+ reset-gpios: true
+
+ vddp-supply:
+ description: |
+ The regulator that provides the supply voltage Power IC supply (3-5V)
+
+ iovcc-supply:
+ description: |
+ The regulator that provides the supply voltage IOVCC,
+ power supply for LCM (1.8V)
+
+ dcdc-en-gpios:
+ maxItems: 1
+ description: |
+ phandle of the gpio for power ic line
+ Power IC supply enable, High active
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vddp-supply
+ - iovcc-supply
+ - enable-gpios
+ - reset-gpios
+ - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ vddp-supply = <&pm8921_l17>;
+ iovcc-supply = <&pm8921_lvs7>;
+
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+ dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
new file mode 100644
index 0000000..b4be9bd
--- /dev/null
+++ b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: kingdisplay,kd035g6-54nt
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 0000000..ebdca5f
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: leadtek,ltk035c5444t
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "leadtek,ltk035c5444t";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/leadtek,ltk050h3146w.yaml b/Bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 0000000..a40ab88
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+ - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - leadtek,ltk050h3146w
+ - leadtek,ltk050h3146w-a2
+ - leadtek,ltk050h3148w
+ reg: true
+ backlight: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vci-supply:
+ description: regulator that supplies the vci voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - iovcc-supply
+ - vci-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "leadtek,ltk050h3146w";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vci-supply = <&vcc3v3_lcd>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
new file mode 100644
index 0000000..c5944b4
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: leadtek,ltk500hd1829
+ reg: true
+ backlight: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vcc-supply:
+ description: regulator that supplies the vcc voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - iovcc-supply
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "leadtek,ltk500hd1829";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vcc-supply = <&vcc_2v8>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/lg,lg4573.yaml b/Bindings/display/panel/lg,lg4573.yaml
new file mode 100644
index 0000000..ee357e1
--- /dev/null
+++ b/Bindings/display/panel/lg,lg4573.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+ The panel must obey the rules for a SPI slave device as specified in
+ spi/spi-controller.yaml
+
+maintainers:
+ - Heiko Schocher <hs@denx.de>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: lg,lg4573
+
+ reg: true
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd_panel: display@0 {
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/lgphilips,lb035q02.yaml b/Bindings/display/panel/lgphilips,lb035q02.yaml
new file mode 100644
index 0000000..628c4b8
--- /dev/null
+++ b/Bindings/display/panel/lgphilips,lb035q02.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: lgphilips,lb035q02
+
+ label: true
+ enable-gpios: true
+ port: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - enable-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "lgphilips,lb035q02";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ enable-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/logicpd,type28.yaml b/Bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 0000000..2834287
--- /dev/null
+++ b/Bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+ - Adam Ford <aford173@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: logicpd,type28
+
+ power-supply: true
+ enable-gpios: true
+ backlight: true
+ port: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ lcd0: display {
+ compatible = "logicpd,type28";
+ enable-gpios = <&gpio5 27 0>;
+ backlight = <&backlight>;
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mantix,mlaf057we51-x.yaml b/Bindings/display/panel/mantix,mlaf057we51-x.yaml
new file mode 100644
index 0000000..74ff772
--- /dev/null
+++ b/Bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+ - Guido Günther <agx@sigxcpu.org>
+
+description:
+ Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+ a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mantix,mlaf057we51-x
+ - ys,ys57pss36bh5gq
+
+ port: true
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ avdd-supply:
+ description: Positive analog power supply
+
+ avee-supply:
+ description: Negative analog power supply
+
+ vddi-supply:
+ description: 1.8V I/O voltage supply
+
+ reset-gpios: true
+
+ mantix,tp-rstn-gpios:
+ maxItems: 1
+ description: second reset line that triggers DSI config load
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - avee-supply
+ - vddi-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "mantix,mlaf057we51-x";
+ reg = <0>;
+ avdd-supply = <®_avdd>;
+ avee-supply = <®_avee>;
+ vddi-supply = <®_1v8_p>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mitsubishi,aa104xd12.yaml b/Bindings/display/panel/mitsubishi,aa104xd12.yaml
new file mode 100644
index 0000000..3623ffa
--- /dev/null
+++ b/Bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa104xd12.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA104XD12 10.4" XGA LVDS Display Panel
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: mitsubishi,aa104xd12
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: mitsubishi,aa104xd12
+ - const: panel-lvds
+
+ vcc-supply:
+ description: Reference to the regulator powering the panel VCC pins.
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 210
+
+ height-mm:
+ const: 158
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - vcc-supply
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+
+ panel {
+ compatible = "mitsubishi,aa104xd12", "panel-lvds";
+ vcc-supply = <&vcc_3v3>;
+
+ width-mm = <210>;
+ height-mm = <158>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1024x768 @65Hz */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hsync-len = <136>;
+ hfront-porch = <20>;
+ hback-porch = <160>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mitsubishi,aa121td01.yaml b/Bindings/display/panel/mitsubishi,aa121td01.yaml
new file mode 100644
index 0000000..37f01d8
--- /dev/null
+++ b/Bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa121td01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA121TD01 12.1" WXGA LVDS Display Panel
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: mitsubishi,aa121td01
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: mitsubishi,aa121td01
+ - const: panel-lvds
+
+ vcc-supply:
+ description: Reference to the regulator powering the panel VCC pins.
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 261
+
+ height-mm:
+ const: 163
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - vcc-supply
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+ panel {
+ compatible = "mitsubishi,aa121td01", "panel-lvds";
+ vcc-supply = <&vcc_3v3>;
+
+ width-mm = <261>;
+ height-mm = <163>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <70>;
+ hfront-porch = <20>;
+ hback-porch = <70>;
+ vsync-len = <5>;
+ vfront-porch = <3>;
+ vback-porch = <15>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/nec,nl8048hl11.yaml b/Bindings/display/panel/nec,nl8048hl11.yaml
new file mode 100644
index 0000000..accf933
--- /dev/null
+++ b/Bindings/display/panel/nec,nl8048hl11.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
+
+description:
+ The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
+ data interface and an SPI control interface.
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: nec,nl8048hl11
+
+ label: true
+ port: true
+ reg: true
+ reset-gpios: true
+
+ spi-max-frequency:
+ maximum: 10000000
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd_panel: panel@0 {
+ compatible = "nec,nl8048hl11";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/newvision,nv3051d.yaml b/Bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 0000000..cce775a
--- /dev/null
+++ b/Bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+ The NewVision NV3051D is a driver chip used to drive DSI panels.
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - anbernic,rg351v-panel
+ - anbernic,rg353p-panel
+ - anbernic,rg353v-panel
+ - const: newvision,nv3051d
+
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios:
+ description: Active low reset GPIO
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
new file mode 100644
index 0000000..bc92928
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt35510.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: hydis,hva40wv1
+ - const: novatek,nt35510
+ description: This indicates the panel manufacturer of the panel
+ that is in turn using the NT35510 panel driver. The compatible
+ string determines how the NT35510 panel driver shall be configured
+ to work with the indicated panel. The novatek,nt35510 compatible shall
+ always be provided as a fallback.
+ reg: true
+ reset-gpios: true
+ vdd-supply:
+ description: regulator that supplies the vdd voltage
+ vddi-supply:
+ description: regulator that supplies the vddi voltage
+ backlight: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "hydis,hva40wv1", "novatek,nt35510";
+ reg = <0>;
+ vdd-supply = <&ab8500_ldo_aux4_reg>;
+ vddi-supply = <&ab8500_ldo_aux6_reg>;
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ backlight = <&gpio_bl>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt35950.yaml b/Bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 0000000..377a05d
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+ The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+ with Static RAM for content retention in command mode and also supports
+ video mode with VESA Frame Buffer Compression or Display Stream Compression
+ on single, or dual dsi port(s).
+ This DDIC is also capable of upscaling an input image to the panel's native
+ resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+ either bilinear interpolation or pixel duplication.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sharp,ls055d1sx04
+ - const: novatek,nt35950
+ description: This indicates the panel manufacturer of the panel
+ that is in turn using the NT35950 panel driver. The compatible
+ string determines how the NT35950 panel driver shall be configured
+ to work with the indicated panel. The novatek,nt35950 compatible shall
+ always be provided as a fallback.
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA, gpio
+ can be configured using mux, pinctrl, pinctrl-names (active high)
+
+ avdd-supply:
+ description: positive boost supply regulator
+ avee-supply:
+ description: negative boost supply regulator
+ dvdd-supply:
+ description: regulator that supplies the digital voltage
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ backlight: true
+ ports: true
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - avdd-supply
+ - avee-supply
+ - dvdd-supply
+ - vddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+ reg = <0>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+ avdd-supply = <&lab>;
+ avee-supply = <&ibb>;
+ dvdd-supply = <&disp_dvdd_vreg>;
+ vddio-supply = <&vreg_l14a_1p85>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel_in1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt36523.yaml b/Bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 0000000..5f7e4c4
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+ - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+ The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+ panels. Support video mode panels from China Star Optoelectronics
+ Technology (CSOT) and BOE Technology.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - xiaomi,elish-boe-nt36523
+ - xiaomi,elish-csot-nt36523
+ - const: novatek,nt36523
+ - items:
+ - enum:
+ - lenovo,j606f-boe-nt36523w
+ - const: novatek,nt36523w
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA
+
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ reg: true
+ ports: true
+ rotation: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - reset-gpios
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+ panel_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt36672a.yaml b/Bindings/display/panel/novatek,nt36672a.yaml
new file mode 100644
index 0000000..ae821f4
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36672a.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672A based DSI display Panels
+
+maintainers:
+ - Sumit Semwal <sumit.semwal@linaro.org>
+
+description: |
+ The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi
+ panels.
+ Right now, support is added only for a Tianma FHD+ LCD display panel with a
+ resolution of 1080x2246. It is a video mode DSI panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - tianma,fhd-video
+ - const: novatek,nt36672a
+ description: This indicates the panel manufacturer of the panel that is
+ in turn using the NT36672A panel driver. This compatible string
+ determines how the NT36672A panel driver is configured for the indicated
+ panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA, gpio
+ can be configured using mux, pinctrl, pinctrl-names (active high)
+
+ vddio-supply:
+ description: phandle of the regulator that provides the supply voltage
+ Power IC supply
+
+ vddpos-supply:
+ description: phandle of the positive boost supply regulator
+
+ vddneg-supply:
+ description: phandle of the negative boost supply regulator
+
+ reg: true
+ port: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vddpos-supply
+ - vddneg-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tianma,fhd-video", "novatek,nt36672a";
+ reg = <0>;
+ vddio-supply = <&vreg_l14a_1p88>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ tianma_nt36672a_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/Bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 0000000..7246379
--- /dev/null
+++ b/Bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+ - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+ This device can be used as bridge between a host controller and LCD panels.
+ Currently supported LCDs are:
+ - LCD-OLinuXino-4.3TS
+ - LCD-OLinuXino-5
+ - LCD-OLinuXino-7
+ - LCD-OLinuXino-10
+
+ The panel itself contains:
+ - AT24C16C EEPROM holding panel identification and timing requirements
+ - AR1021 resistive touch screen controller (optional)
+ - FT5x6 capacitive touch screen controller (optional)
+ - GT911/GT928 capacitive touch screen controller (optional)
+
+ The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+ device information (id, serial, etc.) and timing requirements.
+
+ Touchscreen bingings can be found in these files:
+ - input/touchscreen/goodix.yaml
+ - input/touchscreen/edt-ft5x06.txt
+ - input/touchscreen/ar1021.txt
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: olimex,lcd-olinuxino
+
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@50 {
+ compatible = "olimex,lcd-olinuxino";
+ reg = <0x50>;
+ power-supply = <®_vcc5v0>;
+ enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/orisetech,otm8009a.yaml b/Bindings/display/panel/orisetech,otm8009a.yaml
new file mode 100644
index 0000000..1e4f140
--- /dev/null
+++ b/Bindings/display/panel/orisetech,otm8009a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+ - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+ The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+ a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ const: orisetech,otm8009a
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ enable-gpios: true
+ port: true
+ power-supply: true
+
+ reset-gpios:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 0>;
+ power-supply = <&v1v8>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/panel-common.yaml b/Bindings/display/panel/panel-common.yaml
new file mode 100644
index 0000000..0a57a31
--- /dev/null
+++ b/Bindings/display/panel/panel-common.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Display Panels
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ This document defines device tree properties common to several classes of
+ display panels. It doesn't constitute a device tree binding specification by
+ itself but is meant to be referenced by device tree bindings.
+
+ When referenced from panel device tree bindings the properties defined in this
+ document are defined as follows. The panel device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+properties:
+ # Descriptive Properties
+ width-mm:
+ description:
+ Specifies the width of the physical area where images are displayed. This
+ property is expressed in millimeters and rounded to the closest unit.
+
+ height-mm:
+ description:
+ Specifies the height of the physical area where images are displayed. This
+ property is expressed in millimeters and rounded to the closest unit.
+
+ label:
+ description: |
+ The label property specifies a symbolic name for the panel as a
+ string suitable for use by humans. It typically contains a name inscribed
+ on the system (e.g. as an affixed label) or specified in the system's
+ documentation (e.g. in the user's manual).
+
+ If no such name exists, and unless the property is mandatory according to
+ device tree bindings, it shall rather be omitted than constructed of
+ non-descriptive information. For instance an LCD panel in a system that
+ contains a single panel shall not be labelled "LCD" if that name is not
+ inscribed on the system or used in a descriptive fashion in system
+ documentation.
+
+ rotation:
+ description:
+ Display rotation in degrees counter clockwise (0,90,180,270)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 90, 180, 270]
+
+ # Display Timings
+ panel-timing:
+ description:
+ Most display panels are restricted to a single resolution and
+ require specific display timings. The panel-timing subnode expresses those
+ timings.
+ $ref: panel-timing.yaml#
+
+ display-timings:
+ description:
+ Some display panels support several resolutions with different timings.
+ The display-timings bindings supports specifying several timings and
+ optionally specifying which is the native mode.
+ $ref: display-timings.yaml#
+
+ # Connectivity
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Some panels expose EDID information through an I2C-compatible
+ bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a
+ phandle to the system I2C controller connected to that bus.
+
+ no-hpd:
+ type: boolean
+ description:
+ This panel is supposed to communicate that it's ready via HPD
+ (hot plug detect) signal, but the signal isn't hooked up so we should
+ hardcode the max delay from the panel spec when powering up the panel.
+
+ hpd-gpios:
+ maxItems: 1
+ description:
+ If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+ than a dedicated HPD pin the pin can be specified here.
+
+ # Control I/Os
+
+ # Many display panels can be controlled through pins driven by GPIOs. The nature
+ # and timing of those control signals are device-specific and left for panel
+ # device tree bindings to specify. The following GPIO specifiers can however be
+ # used for panels that implement compatible control signals.
+
+ enable-gpios:
+ maxItems: 1
+ description: |
+ Specifier for a GPIO connected to the panel enable control signal. The
+ enable signal is active high and enables operation of the panel. This
+ property can also be used for panels implementing an active low power down
+ signal, which is a negated version of the enable signal. Active low enable
+ signals (or active high power down signals) can be supported by inverting
+ the GPIO specifier polarity flag.
+
+ Note that the enable signal control panel operation only and must not be
+ confused with a backlight enable signal.
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Specifier for a GPIO connected to the panel reset control signal.
+ The reset signal is active low and resets the panel internal logic
+ while active. Active high reset signals can be supported by inverting the
+ GPIO specifier polarity flag.
+
+ te-gpios:
+ maxItems: 1
+ description:
+ GPIO spec for the tearing effect synchronization signal.
+ The tearing effect signal is active high. Active low signals can be
+ supported by inverting the GPIO specifier polarity flag.
+
+ # Power
+ power-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the power-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ # Backlight
+
+ # Most display panels include a backlight. Some of them also include a backlight
+ # controller exposed through a control bus such as I2C or DSI. Others expose
+ # backlight control through GPIO, PWM or other signals connected to an external
+ # backlight controller.
+
+ backlight:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ For panels whose backlight is controlled by an external backlight
+ controller, this property contains a phandle that references the
+ controller.
+
+dependencies:
+ width-mm: [ height-mm ]
+ height-mm: [ width-mm ]
+
+additionalProperties: true
+
+...
diff --git a/Bindings/display/panel/panel-dpi.yaml b/Bindings/display/panel/panel-dpi.yaml
new file mode 100644
index 0000000..dae0676
--- /dev/null
+++ b/Bindings/display/panel/panel-dpi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+ - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ description:
+ Shall contain a panel specific compatible and "panel-dpi"
+ in that order.
+ items:
+ - {}
+ - const: panel-dpi
+
+ backlight: true
+ enable-gpios: true
+ height-mm: true
+ label: true
+ panel-timing: true
+ port: true
+ power-supply: true
+ reset-gpios: true
+ width-mm: true
+
+required:
+ - panel-timing
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "osddisplay";
+ power-supply = <&vcc_supply>;
+ backlight = <&backlight>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ panel-timing {
+ clock-frequency = <9200000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-dsi-cm.yaml b/Bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 0000000..f8dc992
--- /dev/null
+++ b/Bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ are usually driven in command mode. If no backlight is
+ referenced via the optional backlight property, the DSI
+ panel is assumed to have native backlight support.
+ The panel may use an OF graph binding for the association
+ to the display, or it may be a direct child node of the
+ display.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ items:
+ - enum:
+ - motorola,droid4-panel # Panel from Motorola Droid4 phone
+ - nokia,himalaya # Panel from Nokia N950 phone
+ - tpo,taal # Panel from OMAP4 SDP board
+ - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddi-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the vddi-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ vpnl-supply:
+ description:
+ When the display panel needs a second power supply, this property can be
+ used in addition to vddi-supply. Both supplies will be enabled at the
+ same time before the panel is being accessed.
+
+ width-mm: true
+ height-mm: true
+ label: true
+ rotation: true
+ panel-timing: true
+ port: true
+ reset-gpios: true
+ te-gpios: true
+ backlight: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-edp.yaml b/Bindings/display/panel/panel-edp.yaml
new file mode 100644
index 0000000..bb0cf68
--- /dev/null
+++ b/Bindings/display/panel/panel-edp.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description: |
+ This binding file can be used to indicate that an eDP panel is connected
+ to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+ actually specifying exactly what panel is connected. This is useful for
+ the case that more than one different panel could be connected to the
+ board, either for second-sourcing purposes or to support multiple SKUs
+ with different LCDs that hook up to a common board.
+
+ As per above, a requirement for using this binding is that the panel is
+ represented under the DP AUX bus. This means that we can use any
+ information provided by the DP AUX bus (including the EDID) to identify
+ the panel. We can use this to identify display size, resolution, and
+ timings among other things.
+
+ One piece of information about eDP panels that is typically _not_
+ provided anywhere on the DP AUX bus is the power sequencing timings.
+ This is the reason why, historically, we've always had to explicitly
+ list eDP panels. We solve that here with two tricks. The "worst case"
+ power on timings for any panels expected to be connected to a board are
+ specified in these bindings. Once we've powered on, it's expected that
+ the operating system will lookup the panel in a table (based on EDID
+ information) to figure out other power sequencing timings.
+
+ eDP panels in general can have somewhat arbitrary power sequencing
+ requirements. However, even though it's arbitrary in general, the
+ vast majority of panel datasheets have a power sequence diagram that
+ looks the exactly the same as every other panel. Each panel datasheet
+ cares about different timings in this diagram but the fact that the
+ diagram is so similar means we can come up with a single driver to
+ handle it.
+
+ These diagrams all look roughly like this, sometimes labeled with
+ slightly different numbers / lines but all pretty much the same
+ sequence. This is because much of this diagram comes straight from
+ the eDP Standard.
+
+ __________________________________________________
+ Vdd ___/: :\____ /
+ _/ : : \_____/
+ :<T1>:<T2>: :<--T10-->:<T11>:<T12>:
+ : +-----------------------+---------+---------+
+ eDP -----------+ Black video | Src vid | Blk vid +
+ Display : +-----------------------+---------+---------+
+ : _______________________:_________:_________:
+ HPD :<T3>| : : |
+ ___________| : : |_____________
+ : : : :
+ Sink +-----------------------:---------:---------+
+ AUX CH -----------+ AUX Ch operational : : +-------------
+ +-----------------------:---------:---------+
+ : : : :
+ :<T4>: :<T7>: : :
+ Src main +------+------+--------------+---------+
+ lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+ +------+------+--------------+---------+
+ : <T5> :<-T6->:<-T8->: :
+ :__:<T9>:
+ LED_EN | |
+ _____________________________________| |____________________________
+ : :
+ __________:__:_
+ PWM | : : |
+ __________________________| : : |__________________________
+ : : : :
+ _____________:__________:__:_:______
+ Bklight ____/: : : : : :\____
+ power _______/ :<---T13---->: : : :<T16>: \______________
+ (Vbl) :<T17>:<---------T14--------->: :<-T15->:<T18>:
+
+ The above looks fairly complex but, as per above, each panel only cares
+ about a subset of those timings.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: edp-panel
+
+ hpd-reliable-delay-ms:
+ description:
+ A fixed amount of time that must be waited after powering on the
+ panel's power-supply before the HPD signal is a reliable way to know
+ when the AUX channel is ready. This is useful for panels that glitch
+ the HPD at the start of power-on. This value is not needed if HPD is
+ always reliable for all panels that might be connected.
+
+ hpd-absent-delay-ms:
+ description:
+ The panel specifies that HPD will be asserted this many milliseconds
+ from power on (timing T3 in the diagram above). If we have no way to
+ measure HPD then a fixed delay of this many milliseconds can be used.
+ This can also be used as a timeout when waiting for HPD. Does not
+ include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+ and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+ then we know HPD would assert in the next 120 ms. This value is not
+ needed if HPD hooked up, either through a GPIO in the panel node or
+ hooked up directly to the eDP controller.
+
+ backlight: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&src_pp1800_s4a>;
+ vccio-supply = <&src_pp1800_s4a>;
+ vcca-supply = <&src_pp1200_l2a>;
+ vcc-supply = <&src_pp1200_l2a>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ clock-names = "refclk";
+
+ no-hpd;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+ hpd-reliable-delay-ms = <15>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-lvds.yaml b/Bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 0000000..9f10165
--- /dev/null
+++ b/Bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: panel-lvds
+
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - advantech,idk-1110wr
+ - advantech,idk-2121wr
+ - innolux,ee101ia-01d
+ - mitsubishi,aa104xd12
+ - mitsubishi,aa121td01
+ - sgd,gktw70sdae4se
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - auo,b101ew05
+ # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
+ - chunghwa,claa070wp03xg
+ # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+ - hannstar,hsd101pww2
+ # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
+ - hydis,hv070wx2-1e0
+ - tbs,a711-panel
+
+ - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+...
diff --git a/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 0000000..e808215
--- /dev/null
+++ b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+ - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+ This binding is for display panels using a MIPI DBI compatible controller
+ in SPI mode.
+
+ The MIPI Alliance Standard for Display Bus Interface defines the electrical
+ and logical interfaces for display controllers historically used in mobile
+ phones. The standard defines 4 display architecture types and this binding is
+ for type 1 which has full frame memory. There are 3 interface types in the
+ standard and type C is the serial interface.
+
+ The standard defines the following interface signals for type C:
+ - Power:
+ - Vdd: Power supply for display module
+ Called power-supply in this binding.
+ - Vddi: Logic level supply for interface signals
+ Called io-supply in this binding.
+ - Interface:
+ - CSx: Chip select
+ - SCL: Serial clock
+ - Dout: Serial out
+ - Din: Serial in
+ - SDA: Bidrectional in/out
+ - D/CX: Data/command selection, high=data, low=command
+ Called dc-gpios in this binding.
+ - RESX: Reset when low
+ Called reset-gpios in this binding.
+
+ The type C interface has 3 options:
+
+ - Option 1: 9-bit mode and D/CX as the 9th bit
+ | Command | the next command or following data |
+ |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 2: 16-bit mode and D/CX as a 9th bit
+ | Command or data |
+ |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 3: 8-bit mode and D/CX as a separate interface line
+ | Command or data |
+ |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ The panel resolution is specified using the panel-timing node properties
+ hactive (width) and vactive (height). The other mandatory panel-timing
+ properties should be set to zero except clock-frequency which can be
+ optionally set to inform about the actual pixel clock frequency.
+
+ If the panel is wired to the controller at an offset specify this using
+ hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - saef,sftc154b
+ - sainsmart18
+ - shineworld,lh133k
+ - const: panel-mipi-dbi-spi
+
+ write-only:
+ type: boolean
+ description:
+ Controller is not readable (ie. Din (MISO on the SPI interface) is not
+ wired up).
+
+ dc-gpios:
+ maxItems: 1
+ description: |
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+
+ io-supply:
+ description: |
+ Logic level supply for interface signals (Vddi).
+ No need to set if this is the same as power-supply.
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - width-mm
+ - height-mm
+ - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0{
+ compatible = "sainsmart18", "panel-mipi-dbi-spi";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ write-only;
+
+ backlight = <&backlight>;
+
+ width-mm = <35>;
+ height-mm = <28>;
+
+ panel-timing {
+ hactive = <160>;
+ vactive = <128>;
+ hback-porch = <0>;
+ vback-porch = <0>;
+ clock-frequency = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-simple-dsi.yaml b/Bindings/display/panel/panel-simple-dsi.yaml
new file mode 100644
index 0000000..f9160d7
--- /dev/null
+++ b/Bindings/display/panel/panel-simple-dsi.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ requires only a single power-supply.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+properties:
+
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+ - auo,b080uan01
+ # Boe Corporation 8.0" WUXGA TFT LCD panel
+ - boe,tv080wum-nl0
+ # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+ - innolux,p079zca
+ # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+ - jdi,fhd-r63452
+ # Khadas TS050 5" 1080x1920 LCD panel
+ - khadas,ts050
+ # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+ - kingdisplay,kd097d04
+ # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+ - lg,acx467akm-7
+ # LG Corporation 7" WXGA TFT LCD panel
+ - lg,ld070wx3-sl01
+ # LG Corporation 5" HD TFT LCD panel
+ - lg,lh500wx1-sd03
+ # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+ - osddisplays,osd101t2587-53ts
+ # Panasonic 10" WUXGA TFT LCD panel
+ - panasonic,vvx10f004b00
+ # Panasonic 10" WUXGA TFT LCD panel
+ - panasonic,vvx10f034n00
+ # Samsung s6e3fc2x01 1080x2340 AMOLED panel
+ - samsung,s6e3fc2x01
+ # Samsung sofef00 1080x2280 AMOLED panel
+ - samsung,sofef00
+ # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
+ - tdo,tl070wsh30
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ enable-gpios: true
+ reset-gpios: true
+ port: true
+ power-supply: true
+ vddio-supply: true
+
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - samsung,s6e3fc2x01
+ - samsung,sofef00
+ then:
+ properties:
+ power-supply: false
+ required:
+ - vddio-supply
+ else:
+ properties:
+ vddio-supply: false
+ required:
+ - power-supply
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vcc_lcd_reg>;
+
+ port {
+ panel: endpoint {
+ remote-endpoint = <<dc_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
new file mode 100644
index 0000000..a5a596f
--- /dev/null
+++ b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple LVDS panels with one power supply and dual LVDS ports
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the LVDS panels that
+ has dual LVDS ports and requires only a single power-supply.
+ The first port receives odd pixels, and the second port receives even pixels.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+ - auo,g133han01
+ # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+ - auo,g185han01
+ # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+ - auo,g190ean01
+ # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+ - koe,tx26d202vm0bwa
+ # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+ - nlt,nl192108ac18-02d
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The first sink port.
+
+ properties:
+ dual-lvds-odd-pixels:
+ type: boolean
+ description: The first sink port for odd pixels.
+
+ required:
+ - dual-lvds-odd-pixels
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The second sink port.
+
+ properties:
+ dual-lvds-even-pixels:
+ type: boolean
+ description: The second sink port for even pixels.
+
+ required:
+ - dual-lvds-even-pixels
+
+ required:
+ - port@0
+ - port@1
+
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - ports
+ - power-supply
+
+examples:
+ - |
+ panel: panel-lvds {
+ compatible = "koe,tx26d202vm0bwa";
+ power-supply = <&vdd_lcd_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ dual-lvds-odd-pixels;
+ reg = <0>;
+
+ panel_lvds0_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ dual-lvds-even-pixels;
+ reg = <1>;
+
+ panel_lvds1_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
new file mode 100644
index 0000000..11422af
--- /dev/null
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -0,0 +1,392 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the simple (dumb) panels that
+ requires only a single power-supply.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: ../lvds-data-mapping.yaml#
+
+properties:
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+ - ampire,am-1280800n3tzqw-t00h
+ # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+ - ampire,am-480272h3tmqw-t01h
+ # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+ - ampire,am-800480l1tmqw-t00h
+ # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+ - ampire,am800480r3tmqwa1h
+ # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+ - ampire,am800600p5tmqw-tb8h
+ # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+ - auo,b101aw03
+ # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+ - auo,b101ean01
+ # AU Optronics Corporation 10.1" WXGA TFT LCD panel
+ - auo,b101xtn01
+ # AUO B116XAK01 eDP TFT LCD panel
+ - auo,b116xa01
+ # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+ - auo,b116xw03
+ # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+ - auo,b133han05
+ # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+ - auo,b133htn01
+ # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+ - auo,b133xtn01
+ # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
+ - auo,b140han06
+ # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+ - auo,g070vvn01
+ # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+ - auo,g101evn010
+ # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+ - auo,g104sn02
+ # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+ - auo,g121ean01
+ # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+ - auo,g156xtn01
+ # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+ - auo,p320hvn03
+ # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+ - auo,t215hvn01
+ # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+ - avic,tm070ddh03
+ # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+ - boe,ev121wxm-n10-1850
+ # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+ - boe,hv070wsa-100
+ # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+ - boe,nv101wxmn51
+ # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv110wtm-n61
+ # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+ - boe,nv133fhm-n61
+ # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv133fhm-n62
+ # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+ - boe,nv140fhmn49
+ # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+ - cdtech,s043wq26h-ct7
+ # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
+ - cdtech,s070pws19hp-fc21
+ # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel
+ - cdtech,s070swv29hg-dc44
+ # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+ - cdtech,s070wv95-ct16
+ # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+ - chefree,ch101olhlwh-002
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wa01a
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wb01
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wb03
+ # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+ - dataimage,fg040346dsswbg04
+ # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+ - dataimage,fg1001l0dsswmg01
+ # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+ - dataimage,scf0700c48ggu18
+ # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+ - dlc,dlc1010gig
+ # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
+ - edt,et035012dm6
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+ - edt,et057090dhu
+ - edt,et070080dh6
+ # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+ # capacitive multitouch
+ - edt,etm0350g0dh6
+ # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
+ - edt,etm043080dh6gp
+ # Emerging Display Technology Corp. 480x272 TFT Display
+ - edt,etm0430g0dh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same as ETM0700G0DH6 but with inverted pixel clock.
+ - edt,etm070080bdh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same timings as the ETM0700G0DH6, but with resistive touch.
+ - edt,etm070080dh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same display as the ETM0700G0BDH6, but with changed hardware for the
+ # backlight and the touch interface.
+ - edt,etm070080edh6
+ - edt,etm0700g0bdh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ - edt,etm0700g0dh6
+ - edt,etm0700g0edh6
+ # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+ - edt,etml0700y5dha
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+ # capacitive touch
+ - edt,etmv570g2dhu
+ # E Ink VB3300-KCA
+ - eink,vb3300-kca
+ # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
+ - evervision,vgg804821
+ # Foxlink Group 5" WVGA TFT LCD panel
+ - foxlink,fl500wvr00-a0t
+ # Frida FRD350H54004 3.5" QVGA TFT LCD panel
+ - frida,frd350h54004
+ # FriendlyELEC HD702E 800x1280 LCD panel
+ - friendlyarm,hd702e
+ # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+ - giantplus,gpg48273qs5
+ # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+ - giantplus,gpm940b0
+ # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+ - hannstar,hsd070pww1
+ # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+ - hannstar,hsd100pxn1
+ # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+ - hit,tx23d38vm0caa
+ # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
+ - ivo,m133nwf4-r0
+ # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+ - innolux,at043tn24
+ # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+ - innolux,at070tn92
+ # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+ - innolux,g070ace-l01
+ # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+ - innolux,g070y2-l01
+ # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+ - innolux,g070y2-t02
+ # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+ - innolux,g101ice-l01
+ # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+ - innolux,g121i1-l01
+ # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+ - innolux,g121x1-l03
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bca-ea1
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bge
+ # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+ - innolux,n125hce-gn1
+ # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
+ - innolux,g156hce-l01
+ # InnoLux 15.6" WXGA TFT LCD panel
+ - innolux,n156bge-l21
+ # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+ - innolux,p120zdg-bf1
+ # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+ - innolux,zj070na-01p
+ # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+ - kingdisplay,kd116n21-30nv-a010
+ # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+ - koe,tx14d24vm1bpa
+ # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+ - koe,tx31d200vm0baa
+ # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+ - kyo,tcg070wvlq
+ # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+ - kyo,tcg121xglp
+ # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+ - lemaker,bl035-rgb-002
+ # LG 7" (800x480 pixels) TFT LCD panel
+ - lg,lb070wv8
+ # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+ - lg,lp079qx1-sp0v
+ # LG 9.7" (2048x1536 pixels) TFT LCD panel
+ - lg,lp097qx1-spa1
+ # LG 12.0" (1920x1280 pixels) TFT LCD panel
+ - lg,lp120up1
+ # LG 12.9" (2560x1700 pixels) TFT LCD panel
+ - lg,lp129qe
+ # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
+ - logictechno,lt161010-2nhc
+ # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
+ - logictechno,lt161010-2nhr
+ # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod.
+ - logictechno,lt170410-2whc
+ # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
+ - logictechno,lttd800480070-l2rt
+ # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
+ - logictechno,lttd800480070-l6wh-rt
+ # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+ - mitsubishi,aa070mc01-ca1
+ # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel
+ - mitsubishi,aa084xe01
+ # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+ - multi-inno,mi0700s4t-6
+ # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+ - multi-inno,mi0800ft-9
+ # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
+ - multi-inno,mi1010ait-1cp
+ # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+ - nec,nl12880bc20-05
+ # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+ - nec,nl4827hc19-05b
+ # Netron-DY E231732 7.0" WSVGA TFT LCD panel
+ - netron-dy,e231732
+ # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+ - neweast,wjfh116008a
+ # Newhaven Display International 480 x 272 TFT LCD panel
+ - newhaven,nhd-4.3-480272ef-atxl
+ # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+ - nvd,9128
+ # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+ - okaya,rs800480t-7x0gp
+ # Olimex 4.3" TFT LCD panel
+ - olimex,lcd-olinuxino-43-ts
+ # On Tat Industrial Company 7" DPI TFT panel.
+ - ontat,yx700wv03
+ # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
+ - ortustech,com37h3m05dtc
+ # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+ - ortustech,com37h3m99dtc
+ # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+ - ortustech,com43h4m85ulc
+ # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+ - osddisplays,osd070t1718-19ts
+ # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
+ - osddisplays,osd101t2045-53ts
+ # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+ - powertip,ph800480t013-idf02
+ # QiaoDian XianShi Corporation 4"3 TFT LCD panel
+ - qiaodian,qd43003c0-40
+ # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
+ - qishenglong,gopher2b-lcd
+ # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
+ - rocktech,rk101ii01d-ct
+ # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+ - rocktech,rk070er9427
+ # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+ - rocktech,rk043fn48h
+ # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+ - samsung,atna33xc20
+ # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+ - samsung,lsn122dl01-c01
+ # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+ - samsung,ltl101al01
+ # Samsung Electronics 10.1" WSVGA TFT LCD panel
+ - samsung,ltn101nt05
+ # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+ - samsung,ltn140at29-301
+ # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+ - satoz,sat050at40h12r2
+ # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+ - sharp,lq035q7db03
+ # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+ - sharp,lq070y3dg3b
+ # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+ - sharp,lq101k1ly04
+ # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+ - sharp,lq123p1jx31
+ # Sharp 14" (1920x1080 pixels) TFT LCD panel
+ - sharp,lq140m1jw46
+ # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+ - sharp,ls020b1dd01d
+ # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+ - shelly,sca07010-bfn-lnn
+ # Starry KR070PE2T 7" WVGA TFT LCD panel
+ - starry,kr070pe2t
+ # Starry 12.2" (1920x1200 pixels) TFT LCD panel
+ - starry,kr122ea0sra
+ # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+ - startek,kd070wvfpa
+ # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+ - team-source-display,tst043015cmhx
+ # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+ - tianma,tm070jdhg30
+ # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
+ - tianma,tm070jvhg33
+ # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+ - tianma,tm070rvhg71
+ # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+ - toshiba,lt089ac29000
+ # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
+ - tpk,f07a-0102
+ # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch
+ - tpk,f10a-0102
+ # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+ # Supported are LVDS versions (-11T, -19T) and parallel ones
+ # (-T, -1T, -7T, -20T).
+ - urt,umsh-8596md-t
+ - urt,umsh-8596md-1t
+ - urt,umsh-8596md-7t
+ - urt,umsh-8596md-11t
+ - urt,umsh-8596md-19t
+ - urt,umsh-8596md-20t
+ # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+ - vivax,tpc9150-panel
+ # VXT 800x480 color TFT LCD panel
+ - vxt,vl050-8048nt-c01
+ # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+ - winstar,wf35ltiacd
+ # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
+ - yes-optoelectronics,ytc700tlag-05-201c
+
+ backlight: true
+ ddc-i2c-bus: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+ data-mapping: true
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: innolux,g101ice-l01
+then:
+ properties:
+ data-mapping: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+examples:
+ - |
+ panel_rgb: panel-rgb {
+ compatible = "ampire,am-480272h3tmqw-t01h";
+ power-supply = <&vcc_lcd_reg>;
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+ - |
+ panel_lvds: panel-lvds {
+ compatible = "innolux,g101ice-l01";
+ power-supply = <&vcc_lcd_reg>;
+
+ data-mapping = "jeida-24";
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <<dc_out_lvds>;
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-timing.yaml b/Bindings/display/panel/panel-timing.yaml
new file mode 100644
index 0000000..aea69b8
--- /dev/null
+++ b/Bindings/display/panel/panel-timing.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ There are different ways of describing the timing data of a panel. The
+ devicetree representation corresponds to the one commonly found in datasheets
+ for panels.
+
+ The parameters are defined as seen in the following illustration.
+
+ +-------+----------+-------------------------------------+----------+
+ | | | ^ | |
+ | | | |vsync_len | |
+ | | | v | |
+ +-------+----------+-------------------------------------+----------+
+ | | | ^ | |
+ | | | |vback_porch | |
+ | | | v | |
+ +-------+----------#######################################----------+
+ | | # ^ # |
+ | | # | # |
+ | hsync | hback # | # hfront |
+ | len | porch # | hactive # porch |
+ |<----->|<-------->#<-------+--------------------------->#<-------->|
+ | | # | # |
+ | | # |vactive # |
+ | | # | # |
+ | | # v # |
+ +-------+----------#######################################----------+
+ | | | ^ | |
+ | | | |vfront_porch | |
+ | | | v | |
+ +-------+----------+-------------------------------------+----------+
+
+
+ The following is the panel timings shown with time on the x-axis.
+ This matches the timing diagrams often found in data sheets.
+
+ Active Front Sync Back
+ Region Porch Porch
+ <-----------------------><----------------><-------------><-------------->
+ //////////////////////|
+ ////////////////////// |
+ ////////////////////// |.................. ................
+ _______________
+
+ Timing can be specified either as a typical value or as a tuple
+ of min, typ, max values.
+
+properties:
+
+ clock-frequency:
+ description: Panel clock in Hz
+
+ hactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Horizontal panel resolution in pixels
+
+ vactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vertical panel resolution in pixels
+
+ hfront-porch:
+ description: Horizontal front porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ hback-porch:
+ description: Horizontal back porch timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ hsync-len:
+ description: Horizontal sync length panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ vfront-porch:
+ description: Vertical front porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ vback-porch:
+ description: Vertical back porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ vsync-len:
+ description: Vertical sync length panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ hsync-active:
+ description: |
+ Horizontal sync pulse.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ vsync-active:
+ description: |
+ Vertical sync pulse.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ de-active:
+ description: |
+ Data enable.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ pixelclk-active:
+ description: |
+ Data driving on rising or falling edge.
+ Use 0 to drive pixel data on falling edge and
+ sample data on rising edge.
+ Use 1 to drive pixel data on rising edge and
+ sample data on falling edge
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ syncclk-active:
+ description: |
+ Drive sync on rising or sample sync on falling edge.
+ If not specified then the setup is as specified by pixelclk-active.
+ Use 0 to drive sync on falling edge and
+ sample sync on rising edge of pixel clock.
+ Use 1 to drive sync on rising edge and
+ sample sync on falling edge of pixel clock
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ interlaced:
+ type: boolean
+ description: Enable interlaced mode
+
+ doublescan:
+ type: boolean
+ description: Enable double scan mode
+
+ doubleclk:
+ type: boolean
+ description: Enable double clock mode
+
+required:
+ - clock-frequency
+ - hactive
+ - vactive
+ - hfront-porch
+ - hback-porch
+ - hsync-len
+ - vfront-porch
+ - vback-porch
+ - vsync-len
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/pda,91-00156-a0.yaml b/Bindings/display/panel/pda,91-00156-a0.yaml
new file mode 100644
index 0000000..ccd3623
--- /dev/null
+++ b/Bindings/display/panel/pda,91-00156-a0.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/pda,91-00156-a0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDA 91-00156-A0 5.0" WVGA TFT LCD panel
+
+maintainers:
+ - Cristian Birsan <cristian.birsan@microchip.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: pda,91-00156-a0
+
+ power-supply: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+ - backlight
+
+...
diff --git a/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml b/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
new file mode 100644
index 0000000..22a083f
--- /dev/null
+++ b/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raspberrypi,7inch-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The official 7" (800x480) Raspberry Pi touchscreen
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ This DSI panel contains:
+
+ - TC358762 DSI->DPI bridge
+ - Atmel microcontroller on I2C for power sequencing the DSI bridge and
+ controlling backlight
+ - Touchscreen controller on I2C for touch input
+
+ and this binding covers the DSI display parts but not its touch input.
+
+properties:
+ compatible:
+ const: raspberrypi,7inch-touchscreen-panel
+
+ reg:
+ const: 0x45
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - port
+
+additionalProperties: false
+
+examples:
+ - |+
+ dsi1: dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ dsi_out_port: endpoint {
+ remote-endpoint = <&panel_dsi_port>;
+ };
+ };
+ };
+
+ i2c_dsi: i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ scl-gpios = <&gpio 28 0>;
+ sda-gpios = <&gpio 29 0>;
+
+ lcd@45 {
+ compatible = "raspberrypi,7inch-touchscreen-panel";
+ reg = <0x45>;
+
+ port {
+ panel_dsi_port: endpoint {
+ remote-endpoint = <&dsi_out_port>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/raydium,rm67191.yaml b/Bindings/display/panel/raydium,rm67191.yaml
new file mode 100644
index 0000000..d62fd69
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm67191.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+ - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: raydium,rm67191
+
+ reg: true
+ port: true
+ reset-gpios: true
+ width-mm: true
+ height-mm: true
+
+ dsi-lanes:
+ description: Number of DSI lanes to be used must be <3> or <4>
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [3, 4]
+
+ v3p3-supply:
+ description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+ v1p8-supply:
+ description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+ video-mode:
+ description: |
+ 0 - burst-mode
+ 1 - non-burst with sync event
+ 2 - non-burst with sync pulse
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+required:
+ - compatible
+ - reg
+ - dsi-lanes
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ dsi-lanes = <4>;
+ width-mm = <68>;
+ height-mm = <121>;
+ video-mode = <1>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/raydium,rm68200.yaml b/Bindings/display/panel/raydium,rm68200.yaml
new file mode 100644
index 0000000..46fe101
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm68200.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+ - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+ The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+ panel connected using a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ const: raydium,rm68200
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+
+ reset-gpios:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 0>;
+ power-supply = <&v1v8>;
+ backlight = <&pwm_backlight>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/raydium,rm692e5.yaml b/Bindings/display/panel/raydium,rm692e5.yaml
new file mode 100644
index 0000000..f436ba6
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm692e5.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM692E5 based DSI display panels
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+ The Raydium RM692E5 is a generic DSI Panel IC used to control
+ AMOLED panels.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fairphone,fp5-rm692e5-boe
+ - const: raydium,rm692e5
+
+ dvdd-supply:
+ description: Digital voltage rail
+
+ vci-supply:
+ description: Analog voltage rail
+
+ vddio-supply:
+ description: I/O voltage rail
+
+ reg: true
+ port: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - dvdd-supply
+ - vci-supply
+ - vddio-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ dvdd-supply = <&vreg_oled_vci>;
+ vci-supply = <&vreg_l12c>;
+ vddio-supply = <&vreg_oled_dvdd>;
+
+ port {
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 0000000..97cccd8
--- /dev/null
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+ - Ondrej Jirman <megi@xff.cz>
+ - Guido Gŭnther <agx@sigxcpu.org>
+
+description:
+ Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+ connected using a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+ - anbernic,rg353v-panel-v2
+ # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
+ - powkiddy,rgb30-panel
+ # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+ - rocktech,jh057n00900
+ # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+ - xingbangda,xbd599
+
+ port: true
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vcc-supply:
+ description: Panel power supply
+
+ iovcc-supply:
+ description: I/O voltage supply
+
+ reset-gpios: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+ - iovcc-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ vcc-supply = <®_2v8_p>;
+ iovcc-supply = <®_1v8_p>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ronbo,rb070d30.yaml b/Bindings/display/panel/ronbo,rb070d30.yaml
new file mode 100644
index 0000000..95ce22c
--- /dev/null
+++ b/Bindings/display/panel/ronbo,rb070d30.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ const: ronbo,rb070d30
+
+ reg:
+ description: MIPI-DSI virtual channel
+
+ power-gpios:
+ description: GPIO used for the power pin
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO used for the reset pin
+ maxItems: 1
+
+ shlr-gpios:
+ description: GPIO used for the shlr pin (horizontal flip)
+ maxItems: 1
+
+ updn-gpios:
+ description: GPIO used for the updn pin (vertical flip)
+ maxItems: 1
+
+ vcc-lcd-supply:
+ description: Power regulator
+
+ backlight:
+ description: Backlight used by the panel
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - power-gpios
+ - reg
+ - reset-gpios
+ - shlr-gpios
+ - updn-gpios
+ - vcc-lcd-supply
+
+additionalProperties: false
diff --git a/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
new file mode 100644
index 0000000..ccc4825
--- /dev/null
+++ b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+ - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s6e3ha2
+ - samsung,s6e3hf2
+ then:
+ required:
+ - enable-gpios
+
+properties:
+ compatible:
+ enum:
+ # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+ - samsung,s6e63j0x03
+ # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+ - samsung,s6e3ha2
+ # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+ - samsung,s6e3hf2
+
+ reg: true
+ reset-gpios: true
+ enable-gpios: true
+ te-gpios: true
+
+ vdd3-supply:
+ description: I/O voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,ams495qa01.yaml b/Bindings/display/panel/samsung,ams495qa01.yaml
new file mode 100644
index 0000000..58fa073
--- /dev/null
+++ b/Bindings/display/panel/samsung,ams495qa01.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,ams495qa01
+
+ reg: true
+ reset-gpios:
+ description: reset gpio, must be GPIO_ACTIVE_LOW
+ elvdd-supply:
+ description: regulator that supplies voltage to the panel display
+ enable-gpios: true
+ port: true
+ vdd-supply:
+ description: regulator that supplies voltage to panel logic
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,ams495qa01";
+ reg = <0>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_3v3>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,ld9040.yaml b/Bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 0000000..c0fabeb
--- /dev/null
+++ b/Bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,ld9040
+
+ display-timings: true
+ port: true
+ reg: true
+ reset-gpios: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: delay after turning regulators on [ms]
+
+ reset-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: delay after reset sequence [ms]
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd@0 {
+ compatible = "samsung,ld9040";
+
+ reg = <0>;
+ vdd3-supply = <&ldo7_reg>;
+ vci-supply = <&ldo17_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ spi-max-frequency = <1200000>;
+ spi-cpol;
+ spi-cpha;
+ power-on-delay = <10>;
+ reset-delay = <10>;
+ panel-width-mm = <90>;
+ panel-height-mm = <154>;
+
+ display-timings {
+ timing {
+ clock-frequency = <23492370>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <16>;
+ hfront-porch = <16>;
+ vback-porch = <2>;
+ vfront-porch = <28>;
+ hsync-len = <2>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_dpi_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,lms380kf01.yaml b/Bindings/display/panel/samsung,lms380kf01.yaml
new file mode 100644
index 0000000..70ffc88
--- /dev/null
+++ b/Bindings/display/panel/samsung,lms380kf01.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS380KF01 display panel
+
+description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
+ Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
+ used with internal or external backlight control.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,lms380kf01
+
+ reg: true
+
+ interrupts:
+ description: provides an optional ESD (electrostatic discharge)
+ interrupt that signals abnormalities in the display hardware.
+ This can also be raised for other reasons like erroneous
+ configuration.
+ maxItems: 1
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 1200000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lms380kf01";
+ spi-max-frequency = <1200000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,lms397kf04.yaml b/Bindings/display/panel/samsung,lms397kf04.yaml
new file mode 100644
index 0000000..5e77cee
--- /dev/null
+++ b/Bindings/display/panel/samsung,lms397kf04.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS397KF04 display panel
+
+description: The datasheet claims this is based around a display controller
+ named DB7430 with a separate backlight controller.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,lms397kf04
+
+ reg: true
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ description: inherited as a SPI client node, the datasheet specifies
+ maximum 300 ns minimum cycle which gives around 3 MHz max frequency
+ maximum: 3000000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,lms397kf04";
+ spi-max-frequency = <3000000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ backlight = <&ktd259>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d16d0.yaml b/Bindings/display/panel/samsung,s6d16d0.yaml
new file mode 100644
index 0000000..66d1474
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d16d0.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D16D0 4" 864x480 AMOLED panel
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6d16d0
+
+ port: true
+ reg: true
+ reset-gpios: true
+
+ vdd1-supply:
+ description: I/O voltage supply
+
+required:
+ - compatible
+ - reg
+ - vdd1-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d27a1.yaml b/Bindings/display/panel/samsung,s6d27a1.yaml
new file mode 100644
index 0000000..d273faf
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d27a1.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D27A1 display panel
+
+description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
+ Displays (SMD).
+
+maintainers:
+ - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6d27a1
+
+ reg: true
+
+ interrupts:
+ description: provides an optional ESD (electrostatic discharge)
+ interrupt that signals abnormalities in the display hardware.
+ This can also be raised for other reasons like erroneous
+ configuration.
+ maxItems: 1
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 1200000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vci-supply
+ - vccio-supply
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,s6d27a1";
+ spi-max-frequency = <1200000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d7aa0.yaml b/Bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 0000000..45a236d
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # 1280x800 LSL080AL02 panel
+ - samsung,lsl080al02
+ # 1024x768 LSL080AL03 panel
+ - samsung,lsl080al03
+ # 1024x768 LTL101AT01 panel
+ - samsung,ltl101at01
+ - const: samsung,s6d7aa0
+
+ reg: true
+
+ backlight:
+ description:
+ Backlight to use for the panel. If this property is set on panels
+ that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+ it overrides the DSI-based backlight.
+
+ reset-gpios:
+ description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+ power-supply:
+ description:
+ Main power supply for the panel; the exact voltage differs between
+ panels, and is usually somewhere around 3.3-5v.
+
+ vmipi-supply:
+ description: VMIPI supply, usually 1.8v.
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+ reg = <0>;
+ power-supply = <&display_3v3_supply>;
+ reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6e63m0.yaml b/Bindings/display/panel/samsung,s6e63m0.yaml
new file mode 100644
index 0000000..6f1fc74
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e63m0.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e63m0 AMOLED LCD panel
+
+maintainers:
+ - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/leds/backlight/common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e63m0
+
+ reg: true
+ reset-gpios: true
+ port: true
+ default-brightness: true
+ max-brightness: true
+
+ spi-3wire: true
+ spi-cpha: true
+ spi-cpol: true
+
+ vdd3-supply:
+ description: VDD regulator
+
+ vci-supply:
+ description: VCI regulator
+
+required:
+ - compatible
+ - reset-gpios
+ - vdd3-supply
+ - vci-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ reset-gpios = <&mp05 5 1>;
+ vdd3-supply = <&ldo12_reg>;
+ vci-supply = <&ldo11_reg>;
+ spi-max-frequency = <1200000>;
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
new file mode 100644
index 0000000..b749e9e
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller
+
+maintainers:
+ - Michael Srba <Michael.Srba@seznam.cz>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e88a0-ams452ef01
+ reg: true
+ port: true
+ reset-gpios: true
+ vdd3-supply:
+ description: core voltage supply
+ vci-supply:
+ description: voltage supply for analog circuits
+
+required:
+ - compatible
+ - reg
+ - port
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ reg = <0>;
+
+ compatible = "samsung,s6e88a0-ams452ef01";
+
+ vdd3-supply = <&pm8916_l17>;
+ vci-supply = <®_vlcd_vci>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/samsung,s6e8aa0.yaml b/Bindings/display/panel/samsung,s6e8aa0.yaml
new file mode 100644
index 0000000..200fbf1
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e8aa0.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e8aa0
+
+ reg: true
+ reset-gpios: true
+ display-timings: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ description: delay after turning regulators on [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ reset-delay:
+ description: delay after reset sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ init-delay:
+ description: delay after initialization sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+ flip-horizontal:
+ description: boolean to flip image horizontally
+ type: boolean
+
+ flip-vertical:
+ description: boolean to flip image vertically
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e8aa0";
+ reg = <0>;
+ vdd3-supply = <&vcclcd_reg>;
+ vci-supply = <&vlcd_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ power-on-delay = <50>;
+ reset-delay = <100>;
+ init-delay = <100>;
+ panel-width-mm = <58>;
+ panel-height-mm = <103>;
+ flip-horizontal;
+ flip-vertical;
+
+ display-timings {
+ timing0: timing-0 {
+ clock-frequency = <57153600>;
+ hactive = <720>;
+ vactive = <1280>;
+ hfront-porch = <5>;
+ hback-porch = <5>;
+ hsync-len = <5>;
+ vfront-porch = <13>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/seiko,43wvf1g.yaml b/Bindings/display/panel/seiko,43wvf1g.yaml
new file mode 100644
index 0000000..1df3cbb
--- /dev/null
+++ b/Bindings/display/panel/seiko,43wvf1g.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sii,43wvf1g
+
+ backlight: true
+ port: true
+
+ dvdd-supply:
+ description: 3v3 digital regulator
+
+ avdd-supply:
+ description: 5v analog regulator
+
+ enable-gpios: true
+
+required:
+ - compatible
+ - dvdd-supply
+ - avdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "sii,43wvf1g";
+
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sgd,gktw70sdae4se.yaml b/Bindings/display/panel/sgd,gktw70sdae4se.yaml
new file mode 100644
index 0000000..e32d918
--- /dev/null
+++ b/Bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sgd,gktw70sdae4se.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: sgd,gktw70sdae4se
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: sgd,gktw70sdae4se
+ - const: panel-lvds
+
+ data-mapping:
+ const: jeida-18
+
+ width-mm:
+ const: 153
+
+ height-mm:
+ const: 86
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - port
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+
+examples:
+ - |+
+ panel {
+ compatible = "sgd,gktw70sdae4se", "panel-lvds";
+
+ width-mm = <153>;
+ height-mm = <86>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ clock-frequency = <32000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <39>;
+ hfront-porch = <39>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ hsync-len = <47>;
+ vsync-len = <2>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ld-d5116z01b.yaml b/Bindings/display/panel/sharp,ld-d5116z01b.yaml
new file mode 100644
index 0000000..fbb647e
--- /dev/null
+++ b/Bindings/display/panel/sharp,ld-d5116z01b.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+maintainers:
+ - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ld-d5116z01b
+
+ power-supply: true
+ backlight: true
+ port: true
+ no-hpd: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/sharp,lq101r1sx01.yaml b/Bindings/display/panel/sharp,lq101r1sx01.yaml
new file mode 100644
index 0000000..57b44a0
--- /dev/null
+++ b/Bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+
+description: |
+ This panel requires a dual-channel DSI host to operate. It supports two modes:
+ - left-right: each channel drives the left or right half of the screen
+ - even-odd: each channel drives the even or odd lines of the screen
+
+ Each of the DSI channels controls a separate DSI peripheral. The peripheral
+ driven by the first link (DSI-LINK1), left or even, is considered the primary
+ peripheral and controls the device. The 'link2' property contains a phandle
+ to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+ Note that in video mode the DSI-LINK1 interface always provides the left/even
+ pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+ is possible to program either link to drive the left/even or right/odd pixels
+ but for the sake of consistency this binding assumes that the same assignment
+ is chosen as for video mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: sharp,lq101r1sx03
+ - const: sharp,lq101r1sx01
+ - enum:
+ - sharp,lq101r1sx01
+
+ reg: true
+ power-supply: true
+ backlight: true
+
+ link2:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the DSI peripheral on the secondary link. Note that the
+ presence of this property marks the containing node as DSI-LINK1
+
+required:
+ - compatible
+ - reg
+
+if:
+ required:
+ - link2
+then:
+ required:
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi0: dsi@fd922800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfd922800 0x200>;
+
+ panel: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+
+ link2 = <&secondary>;
+
+ power-supply = <&power>;
+ backlight = <&backlight>;
+ };
+ };
+
+ dsi1: dsi@fd922a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfd922a00 0x200>;
+
+ secondary: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,lq150x1lg11.yaml b/Bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 0000000..92f2d12
--- /dev/null
+++ b/Bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,lq150x1lg11
+
+ power-supply: true
+ backlight: true
+
+ rlud-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the RL/UD (rotate 180 degrees) pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+ sellvds-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the SELLVDS pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+required:
+ - compatible
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ panel {
+ compatible = "sharp,lq150x1lg11";
+
+ power-supply = <&vcc_3v3_reg>; /* VCC */
+
+ backlight = <&backlight>;
+ rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
+ sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls037v7dw01.yaml b/Bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 0000000..8c47a9b
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+ This panel can have zero to five GPIOs to configure to change configuration
+ between QVGA and VGA mode and the scan direction. As these pins can be also
+ configured with external pulls, all the GPIOs are considered optional with holes
+ in the array.
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls037v7dw01
+
+ label: true
+ enable-gpios: true
+ reset-gpios: true
+ port: true
+ power-supply: true
+
+ mode-gpios:
+ minItems: 1
+ maxItems: 3
+ description: |
+ GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+ This panel can have zero to three GPIOs to configure to
+ change configuration between QVGA and VGA mode and the
+ scan direction. As these pins can be also configured
+ with external pulls, all the GPIOs are considered
+ optional with holes in the array.
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ lcd0: display {
+ compatible = "sharp,ls037v7dw01";
+ power-supply = <&lcd_3v3>;
+ enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
+ mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
+ &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
+ &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls043t1le01.yaml b/Bindings/display/panel/sharp,ls043t1le01.yaml
new file mode 100644
index 0000000..a90d0d8
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls043t1le01.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+maintainers:
+ - Werner Johansson <werner.johansson@sonymobile.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls043t1le01-qhd
+
+ reg: true
+ backlight: true
+ reset-gpios: true
+ port: true
+
+ avdd-supply:
+ description: handle of the regulator that provides the supply voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls043t1le01-qhd";
+ reg = <0>;
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&pm8941_wled>;
+ reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls060t1sx01.yaml b/Bindings/display/panel/sharp,ls060t1sx01.yaml
new file mode 100644
index 0000000..271c097
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
+
+maintainers:
+ - Dmitry Baryskov <dmitry.baryshkov@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls060t1sx01
+
+ reg: true
+ backlight: true
+ reset-gpios: true
+ port: true
+
+ avdd-supply:
+ description: handle of the regulator that provides the positive supply voltage
+ avee-supply:
+ description: handle of the regulator that provides the negative supply voltage
+ vddi-supply:
+ description: handle of the regulator that provides the I/O supply voltage
+ vddh-supply:
+ description: handle of the regulator that provides the analog supply voltage
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls060t1sx01";
+ reg = <0>;
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&backlight>;
+ reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sitronix,st7701.yaml b/Bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 0000000..4dc0cd4
--- /dev/null
+++ b/Bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+ ST7701 designed for small and medium sizes of TFT LCD display, is
+ capable of supporting up to 480RGBX864 in resolution. It provides
+ several system interfaces like MIPI/RGB/SPI.
+
+ Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+ inbuilt ST7701 chip.
+
+ Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+ which has built-in ST7701 chip.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - densitron,dmt028vghmcmi-1a
+ - elida,kd50t048a
+ - techstar,ts8550b
+ - const: sitronix,st7701
+
+ reg:
+ description: DSI virtual channel used by that screen
+ maxItems: 1
+
+ VCC-supply:
+ description: analog regulator for MIPI circuit
+
+ IOVCC-supply:
+ description: I/O system regulator
+
+ port: true
+ reset-gpios: true
+ rotation: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - VCC-supply
+ - IOVCC-supply
+ - port
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "techstar,ts8550b", "sitronix,st7701";
+ reg = <0>;
+ VCC-supply = <®_dldo2>;
+ IOVCC-supply = <®_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/sitronix,st7789v.yaml b/Bindings/display/panel/sitronix,st7789v.yaml
new file mode 100644
index 0000000..ef162b5
--- /dev/null
+++ b/Bindings/display/panel/sitronix,st7789v.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7789V RGB panel with SPI control bus
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - edt,et028013dma
+ - inanbo,t28cp45tn89-v17
+ - jasonic,jt240mhqs-hwt-ek-e3
+ - sitronix,st7789v
+
+ reg: true
+ reset-gpios: true
+ power-supply: true
+ backlight: true
+ port: true
+ rotation: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+ spi-rx-bus-width:
+ minimum: 0
+ maximum: 1
+
+ dc-gpios:
+ maxItems: 1
+ description: DCX pin, Display data/command selection pin in parallel interface
+
+required:
+ - compatible
+ - reg
+ - power-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sitronix,st7789v";
+ reg = <0>;
+ reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+ backlight = <&pwm_bl>;
+ power-supply = <&power>;
+ rotation = <180>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,acx424akp.yaml b/Bindings/display/panel/sony,acx424akp.yaml
new file mode 100644
index 0000000..059cc6d
--- /dev/null
+++ b/Bindings/display/panel/sony,acx424akp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+ the Novatek NT35560 display controller. The only difference is that
+ the AKM is configured to use 10 pixels less in the Y axis than the
+ AKP.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sony,acx424akp
+ - sony,acx424akm
+ reg: true
+ reset-gpios: true
+ vddi-supply:
+ description: regulator that supplies the vddi voltage
+ enforce-video-mode: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller@a0351000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0351000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sony,acx424akp";
+ reg = <0>;
+ vddi-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,acx565akm.yaml b/Bindings/display/panel/sony,acx565akm.yaml
new file mode 100644
index 0000000..98abdf4
--- /dev/null
+++ b/Bindings/display/panel/sony,acx565akm.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX565AKM SDI Panel
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: sony,acx565akm
+
+ label: true
+ reset-gpios: true
+ port: true
+
+required:
+ - compatible
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@2 {
+ compatible = "sony,acx565akm";
+ spi-max-frequency = <6000000>;
+ reg = <2>;
+
+ label = "lcd";
+ reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&sdi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,td4353-jdi.yaml b/Bindings/display/panel/sony,td4353-jdi.yaml
new file mode 100644
index 0000000..b6b885b
--- /dev/null
+++ b/Bindings/display/panel/sony,td4353-jdi.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+ The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
+ MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sony,td4353-jdi-tama
+
+ reg: true
+
+ backlight: true
+
+ vddio-supply:
+ description: VDDIO 1.8V supply
+
+ vsp-supply:
+ description: Positive 5.5V supply
+
+ vsn-supply:
+ description: Negative 5.5V supply
+
+ panel-reset-gpios:
+ description: Display panel reset pin
+
+ touch-reset-gpios:
+ description: Touch panel reset pin
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vsp-supply
+ - vsn-supply
+ - panel-reset-gpios
+ - touch-reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "sony,td4353-jdi-tama";
+ reg = <0>;
+
+ backlight = <&pmi8998_wled>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ vsp-supply = <&lab>;
+ vsn-supply = <&ibb>;
+ panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 0000000..9679729
--- /dev/null
+++ b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+ can be found no Sony Xperia M4 phone. The panel backlight is managed
+ through DSI link.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sony,tulip-truly-nt35521
+
+ reg: true
+
+ positive5-supply:
+ description: Positive 5V supply
+
+ negative5-supply:
+ description: Negative 5V supply
+
+ reset-gpios: true
+
+ enable-gpios: true
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - positive5-supply
+ - negative5-supply
+ - reset-gpios
+ - enable-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sony,tulip-truly-nt35521";
+ reg = <0>;
+ positive5-supply = <&positive5_reg>;
+ negative5-supply = <&negative5_reg>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/startek,kd070fhfid015.yaml b/Bindings/display/panel/startek,kd070fhfid015.yaml
new file mode 100644
index 0000000..d817f99
--- /dev/null
+++ b/Bindings/display/panel/startek,kd070fhfid015.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel
+
+maintainers:
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: startek,kd070fhfid015
+
+ enable-gpios: true
+
+ iovcc-supply:
+ description: Reference to the regulator powering the panel IO pins.
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ reset-gpios: true
+
+ port: true
+
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - enable-gpios
+ - iovcc-supply
+ - reg
+ - reset-gpios
+ - port
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "startek,kd070fhfid015";
+ reg = <0>;
+ enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+ iovcc-supply = <&mt6357_vsim1_reg>;
+ power-supply = <&vsys_lcm_reg>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/startek,startek-kd050c.yaml b/Bindings/display/panel/startek,startek-kd050c.yaml
new file mode 100644
index 0000000..fd66864
--- /dev/null
+++ b/Bindings/display/panel/startek,startek-kd050c.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+maintainers:
+ - Nikita Kiryanov <nikita@compulab.co.il>
+
+allOf:
+ - $ref: panel-dpi.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: startek,startek-kd050c
+ - {} # panel-dpi, but not listed here to avoid false select
+
+ backlight: true
+ enable-gpios: true
+ height-mm: true
+ label: true
+ panel-timing: true
+ port: true
+ power-supply: true
+ reset-gpios: true
+ width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml b/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
new file mode 100644
index 0000000..9e59944
--- /dev/null
+++ b/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tfc,s9700rtwv43tr-01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD panel with resistive touch
+
+maintainers:
+ - Jyri Sarha <jsarha@ti.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ The panel is found on TI AM335x-evm.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: tfc,s9700rtwv43tr-01b
+
+ enable-gpios: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/ti,nspire.yaml b/Bindings/display/panel/ti,nspire.yaml
new file mode 100644
index 0000000..5c5a3b5
--- /dev/null
+++ b/Bindings/display/panel/ti,nspire.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ti,nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments NSPIRE Display Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,nspire-cx-lcd-panel
+ - ti,nspire-classic-lcd-panel
+ port: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "ti,nspire-cx-lcd-panel";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&pads>;
+ };
+ };
+ };
diff --git a/Bindings/display/panel/tpo,td.yaml b/Bindings/display/panel/tpo,td.yaml
new file mode 100644
index 0000000..e8c8ee8
--- /dev/null
+++ b/Bindings/display/panel/tpo,td.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toppoly TD Panels
+
+maintainers:
+ - Marek Belisko <marek@goldelico.com>
+ - H. Nikolaus Schaller <hns@goldelico.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ # Toppoly TD028TTEC1 Panel
+ - tpo,td028ttec1
+ # Toppoly TD043MTEA1 Panel
+ - tpo,td043mtea1
+
+ reg: true
+ label: true
+ reset-gpios: true
+ backlight: true
+ port: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "tpo,td043mtea1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ reset-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/tpo,tpg110.yaml b/Bindings/display/panel/tpo,tpg110.yaml
new file mode 100644
index 0000000..f0243d1
--- /dev/null
+++ b/Bindings/display/panel/tpo,tpg110.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,tpg110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPO TPG110 Panel
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ This panel driver is a component that acts as an intermediary
+ between an RGB output and a variety of panels. The panel
+ driver is strapped up in electronics to the desired resolution
+ and other properties, and has a control interface over 3WIRE
+ SPI. By talking to the TPG110 over SPI, the strapped properties
+ can be discovered and the hardware is therefore mostly
+ self-describing.
+
+ +--------+
+ SPI -> | TPO | -> physical display
+ RGB -> | TPG110 |
+ +--------+
+
+ If some electrical strap or alternate resolution is desired,
+ this can be set up by taking software control of the display
+ over the SPI interface. The interface can also adjust
+ for properties of the display such as gamma correction and
+ certain electrical driving levels.
+
+ The TPG110 does not know the physical dimensions of the panel
+ connected, so this needs to be specified in the device tree.
+
+ It requires a GPIO line for control of its reset line.
+
+ The serial protocol has line names that resemble I2C but the
+ protocol is not I2C but 3WIRE SPI.
+
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ste,nomadik-nhk15-display
+ - const: tpo,tpg110
+ - const: tpo,tpg110
+
+ reg: true
+
+ grestb-gpios:
+ maxItems: 1
+ description: panel reset GPIO
+
+ spi-3wire: true
+
+ spi-max-frequency:
+ const: 3000000
+
+required:
+ - compatible
+ - reg
+ - grestb-gpios
+ - width-mm
+ - height-mm
+ - spi-3wire
+ - spi-max-frequency
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: display@0 {
+ compatible = "tpo,tpg110";
+ reg = <0>;
+ spi-3wire;
+ /* 320 ns min period ~= 3 MHz */
+ spi-max-frequency = <3000000>;
+ /* Width and height from data sheet */
+ width-mm = <116>;
+ height-mm = <87>;
+ grestb-gpios = <&foo_gpio 5 1>;
+ backlight = <&bl>;
+
+ port {
+ nomadik_clcd_panel: endpoint {
+ remote-endpoint = <&foo>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/visionox,r66451.yaml b/Bindings/display/panel/visionox,r66451.yaml
new file mode 100644
index 0000000..6ba3236
--- /dev/null
+++ b/Bindings/display/panel/visionox,r66451.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox R66451 AMOLED DSI Panel
+
+maintainers:
+ - Jessica Zhang <quic_jesszhan@quicinc.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,r66451
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddio-supply: true
+ vdd-supply: true
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vdd-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "visionox,r66451";
+ reg = <0>;
+ vddio-supply = <&vreg_l12c_1p8>;
+ vdd-supply = <&vreg_l13c_3p0>;
+
+ reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 0000000..fa745a6
--- /dev/null
+++ b/Bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels
+
+maintainers:
+ - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+ This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,rm69299-1080p-display
+
+ reg: true
+
+ vdda-supply:
+ description: |
+ Phandle of the regulator that provides the vdda supply voltage.
+
+ vdd3p3-supply:
+ description: |
+ Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vdda-supply
+ - vdd3p3-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "visionox,rm69299-1080p-display";
+ reg = <0>;
+
+ vdda-supply = <&src_pp1800_l8c>;
+ vdd3p3-supply = <&src_pp2800_l18a>;
+
+ reset-gpios = <&pm6150l_gpio 3 0>;
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/visionox,vtdr6130.yaml b/Bindings/display/panel/visionox,vtdr6130.yaml
new file mode 100644
index 0000000..d5a8295
--- /dev/null
+++ b/Bindings/display/panel/visionox,vtdr6130.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox VTDR6130 AMOLED DSI Panel
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,vtdr6130
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddio-supply: true
+ vci-supply: true
+ vdd-supply: true
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vci-supply
+ - vdd-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l12b_1p8>;
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/xinpeng,xpp055c272.yaml b/Bindings/display/panel/xinpeng,xpp055c272.yaml
new file mode 100644
index 0000000..c407deb
--- /dev/null
+++ b/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: xinpeng,xpp055c272
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vci-supply:
+ description: regulator that supplies the vci voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - port
+ - iovcc-supply
+ - vci-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xinpeng,xpp055c272";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vci-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...