Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/i2c/nvidia,tegra20-i2c.yaml b/Bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 0000000..424a4fc
--- /dev/null
+++ b/Bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+ compatible:
+ oneOf:
+ - description: Tegra20 has 4 generic I2C controller. This can support
+ master and slave mode of I2C communication. The i2c-tegra driver
+ only support master mode of I2C communication. Driver of I2C
+ controller is only compatible with "nvidia,tegra20-i2c".
+ const: nvidia,tegra20-i2c
+ - description: Tegra20 has specific I2C controller called as DVC I2C
+ controller. This only support master mode of I2C communication.
+ Register interface/offset and interrupts handling are different than
+ generic I2C controller. Driver of DVC I2C controller is only
+ compatible with "nvidia,tegra20-i2c-dvc".
+ const: nvidia,tegra20-i2c-dvc
+ - description: |
+ Tegra30 has 5 generic I2C controller. This controller is very much
+ similar to Tegra20 I2C controller with additional feature: Continue
+ Transfer Support. This feature helps to implement M_NO_START as per
+ I2C core API transfer flags. Driver of I2C controller is compatible
+ with "nvidia,tegra30-i2c" to enable the continue transfer support.
+ This is also compatible with "nvidia,tegra20-i2c" without continue
+ transfer support.
+ items:
+ - const: nvidia,tegra30-i2c
+ - const: nvidia,tegra20-i2c
+ - description: |
+ Tegra114 has 5 generic I2C controllers. This controller is very much
+ similar to Tegra30 I2C controller with some hardware modification:
+ - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+ and fast-clk. Tegra114 has only one clock source called as
+ div-clk and hence clock mechanism is changed in I2C controller.
+ - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+ by default and there is no way to disable it. Tegra114 has this
+ interrupt disable by default and SW need to enable explicitly.
+ Due to above changes, Tegra114 I2C driver makes incompatible with
+ previous hardware driver. Hence, Tegra114 I2C controller is
+ compatible with "nvidia,tegra114-i2c".
+ const: nvidia,tegra114-i2c
+ - description: |
+ Tegra124 has 6 generic I2C controllers. These controllers are very
+ similar to those found on Tegra114 but also contain several hardware
+ improvements and new registers.
+ const: nvidia,tegra124-i2c
+ - description: |
+ Tegra210 has 6 generic I2C controllers. These controllers are very
+ similar to those found on Tegra124.
+ items:
+ - const: nvidia,tegra210-i2c
+ - const: nvidia,tegra124-i2c
+ - description: |
+ Tegra210 has one I2C controller that is on host1x bus and is part of
+ the VE power domain and typically used for camera use-cases. This VI
+ I2C controller is mostly compatible with the programming model of
+ the regular I2C controllers with a few exceptions. The I2C registers
+ start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+ apart (rather than 4) and the controller does not support slave
+ mode.
+ const: nvidia,tegra210-i2c-vi
+ - description: |
+ Tegra186 has 9 generic I2C controllers, two of which are in the AON
+ (always-on) partition of the SoC. All of these controllers are very
+ similar to those found on Tegra210.
+ const: nvidia,tegra186-i2c
+ - description: |
+ Tegra194 has 8 generic I2C controllers, two of which are in the AON
+ (always-on) partition of the SoC. All of these controllers are very
+ similar to those found on Tegra186. However, these controllers have
+ support for 64 KiB transactions whereas earlier chips supported no
+ more than 4 KiB per transactions.
+ const: nvidia,tegra194-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: i2c
+
+ dmas:
+ items:
+ - description: DMA channel for the reception FIFO
+ - description: DMA channel for the transmission FIFO
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-i2c
+ - nvidia,tegra30-i2c
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: div-clk
+ - const: fast-clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra114-i2c
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: div-clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra210-i2c
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: div-clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra210-i2c-vi
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: div-clk
+ - const: slow
+ power-domains:
+ items:
+ - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ clocks = <&tegra_car 12>, <&tegra_car 124>;
+ clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };