Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/leds/leds-aw2013.yaml b/Bindings/leds/leds-aw2013.yaml
new file mode 100644
index 0000000..2623844
--- /dev/null
+++ b/Bindings/leds/leds-aw2013.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW2013 3-channel LED Driver
+
+maintainers:
+ - Nikita Travkin <nikitos.tr@gmail.com>
+
+description: |
+ The AW2013 is a 3-channel LED driver with I2C interface. It can control
+ LED brightness with PWM output.
+
+properties:
+ compatible:
+ const: awinic,aw2013
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: Open-drain, low active interrupt pin "INTN".
+ Used to report completion of operations (power up, LED breath effects).
+
+ vcc-supply:
+ description: Regulator providing power to the "VCC" pin.
+
+ vio-supply:
+ description: Regulator providing power for pull-up of the I/O lines.
+ "VIO1" in the typical application circuit example of the datasheet.
+ Note that this regulator does not directly connect to AW2013, but is
+ needed for the correct operation of the interrupt and I2C lines.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-2]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 0
+ maximum: 2
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@45 {
+ compatible = "awinic,aw2013";
+ reg = <0x45>;
+ interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc-supply = <&pm8916_l17>;
+
+ led@0 {
+ reg = <0>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+...