Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/spi/cdns,qspi-nor.yaml b/Bindings/spi/cdns,qspi-nor.yaml
new file mode 100644
index 0000000..cca81f8
--- /dev/null
+++ b/Bindings/spi/cdns,qspi-nor.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Quad SPI controller
+
+maintainers:
+ - Vaishnav Achath <vaishnav.a@ti.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: xlnx,versal-ospi-1.0
+ then:
+ required:
+ - power-domains
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh7110-qspi
+ then:
+ properties:
+ resets:
+ minItems: 2
+ maxItems: 3
+
+ reset-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ enum: [ qspi, qspi-ocp, rstc_ref ]
+
+ else:
+ properties:
+ resets:
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ qspi, qspi-ocp ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amd,pensando-elba-qspi
+ then:
+ properties:
+ cdns,fifo-depth:
+ enum: [ 128, 256, 1024 ]
+ default: 1024
+ else:
+ properties:
+ cdns,fifo-depth:
+ enum: [ 128, 256 ]
+ default: 128
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amd,pensando-elba-qspi
+ - ti,k2g-qspi
+ - ti,am654-ospi
+ - intel,lgm-qspi
+ - xlnx,versal-ospi-1.0
+ - intel,socfpga-qspi
+ - starfive,jh7110-qspi
+ - const: cdns,qspi-nor
+ - const: cdns,qspi-nor
+
+ reg:
+ items:
+ - description: the controller register set
+ - description: the controller data area
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: ref
+ - items:
+ - const: ref
+ - const: ahb
+ - const: apb
+
+ cdns,fifo-depth:
+ description:
+ Size of the data FIFO in words.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cdns,fifo-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Bus width of the data FIFO in bytes.
+ default: 4
+
+ cdns,trigger-address:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ 32-bit indirect AHB trigger address.
+
+ cdns,is-decoded-cs:
+ type: boolean
+ description:
+ Flag to indicate whether decoder is used to select different chip select
+ for different memory regions.
+
+ cdns,rclk-en:
+ type: boolean
+ description:
+ Flag to indicate that QSPI return clock is used to latch the read
+ data rather than the QSPI clock. Make sure that QSPI return clock
+ is populated on the board before using this property.
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 2
+ maxItems: 3
+
+ reset-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ enum: [ qspi, qspi-ocp, rstc_ref ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - cdns,fifo-depth
+ - cdns,fifo-width
+ - cdns,trigger-address
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ qspi: spi@ff705000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff705000 0x1000>,
+ <0xffa00000 0x1000>;
+ interrupts = <0 151 4>;
+ clocks = <&qspi_clk>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ resets = <&rst 0x1>, <&rst 0x2>;
+ reset-names = "qspi", "qspi-ocp";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ };
+ };