Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/spi/spi-sprd.txt b/Bindings/spi/spi-sprd.txt
new file mode 100644
index 0000000..3c7eacc
--- /dev/null
+++ b/Bindings/spi/spi-sprd.txt
@@ -0,0 +1,33 @@
+Spreadtrum SPI Controller
+
+Required properties:
+- compatible: Should be "sprd,sc9860-spi".
+- reg: Offset and length of SPI controller register space.
+- interrupts: Should contain SPI interrupt.
+- clock-names: Should contain following entries:
+ "spi" for SPI clock,
+ "source" for SPI source (parent) clock,
+ "enable" for SPI module enable clock.
+- clocks: List of clock input name strings sorted in the same order
+ as the clock-names property.
+- #address-cells: The number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be set to 0.
+
+Optional properties:
+dma-names: Should contain names of the SPI used DMA channel.
+dmas: Should contain DMA channels and DMA slave ids which the SPI used
+ sorted in the same order as the dma-names property.
+
+Example:
+spi0: spi@70a00000{
+ compatible = "sprd,sc9860-spi";
+ reg = <0 0x70a00000 0 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "spi", "source","enable";
+ clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+ dma-names = "rx_chn", "tx_chn";
+ dmas = <&apdma 11 11>, <&apdma 12 12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};