Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/usb/microchip,usb5744.yaml b/Bindings/usb/microchip,usb5744.yaml
new file mode 100644
index 0000000..6d4cfd9
--- /dev/null
+++ b/Bindings/usb/microchip,usb5744.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB5744 4-port Hub Controller
+
+description:
+ Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
+ low power, low pin count configurable and fully compliant with the USB 3.1
+ Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
+ (LS) USB signaling, offering complete coverage of all defined USB operating
+ speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
+ controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
+ USB 2.0 traffic.
+
+maintainers:
+ - Piyush Mehta <piyush.mehta@amd.com>
+ - Michal Simek <michal.simek@amd.com>
+
+properties:
+ compatible:
+ enum:
+ - usb424,2744
+ - usb424,5744
+ - microchip,usb5744
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ GPIO controlling the GRST# pin.
+
+ vdd-supply:
+ description:
+ 3V3 power supply to the hub
+
+ vdd2-supply:
+ description:
+ 1V2 power supply to the hub
+
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the peer hub on the controller.
+
+ i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of an usb hub connected via i2c bus.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,usb5744
+ then:
+ properties:
+ reset-gpios: false
+ vdd-supply: false
+ vdd2-supply: false
+ peer-hub: false
+ i2c-bus: false
+ else:
+ $ref: /schemas/usb/usb-device.yaml
+ required:
+ - peer-hub
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c: i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hub: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };