Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
new file mode 100644
index 0000000..915c820
--- /dev/null
+++ b/Bindings/usb/qcom,dwc3.yaml
@@ -0,0 +1,544 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+ - Wesley Cheng <quic_wcheng@quicinc.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,ipq4019-dwc3
+ - qcom,ipq5018-dwc3
+ - qcom,ipq5332-dwc3
+ - qcom,ipq6018-dwc3
+ - qcom,ipq8064-dwc3
+ - qcom,ipq8074-dwc3
+ - qcom,ipq9574-dwc3
+ - qcom,msm8953-dwc3
+ - qcom,msm8994-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,qcm2290-dwc3
+ - qcom,qcs404-dwc3
+ - qcom,sa8775p-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
+ - qcom,sc8280xp-dwc3
+ - qcom,sdm660-dwc3
+ - qcom,sdm670-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
+ - qcom,sdx75-dwc3
+ - qcom,sm4250-dwc3
+ - qcom,sm6115-dwc3
+ - qcom,sm6125-dwc3
+ - qcom,sm6350-dwc3
+ - qcom,sm6375-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8350-dwc3
+ - qcom,sm8450-dwc3
+ - qcom,sm8550-dwc3
+ - const: qcom,dwc3
+
+ reg:
+ description: Offset and length of register set for QSCRATCH wrapper
+ maxItems: 1
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ power-domains:
+ description: specifies a phandle to PM domain provider node
+ maxItems: 1
+
+ required-opps:
+ maxItems: 1
+
+ clocks:
+ description: |
+ Several clocks are used, depending on the variant. Typical ones are::
+ - cfg_noc:: System Config NOC clock.
+ - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+ 60MHz for HS operation.
+ - iface:: System bus AXI clock.
+ - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+ power mode (U3).
+ - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+ mode. Its frequency should be 19.2MHz.
+ minItems: 1
+ maxItems: 9
+
+ clock-names:
+ minItems: 1
+ maxItems: 9
+
+ resets:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: usb-ddr
+ - const: apps-usb
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 4
+
+ qcom,select-utmi-as-pipe-clk:
+ description:
+ If present, disable USB3 pipe_clk requirement.
+ Used when dwc3 operates without SSPHY and only
+ HS/FS/LS modes are supported.
+ type: boolean
+
+ wakeup-source: true
+
+# Required child node:
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ wakeup-source: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq4019-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8064-dwc3
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Master/Core clock, has to be >= 125 MHz
+ for SS operation and >= 60MHz for HS operation.
+ clock-names:
+ items:
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq9574-dwc3
+ - qcom,msm8953-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,sa8775p-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
+ - qcom,sdm670-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
+ - qcom,sdx75-dwc3
+ - qcom,sm6350-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 5
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq6018-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 4
+ clock-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+ - items:
+ - const: cfg_noc
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq5018-dwc3
+ - qcom,ipq5332-dwc3
+ - qcom,msm8994-dwc3
+ - qcom,qcs404-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 9
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: noc_aggr
+ - const: noc_aggr_north
+ - const: noc_aggr_south
+ - const: noc_sys
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm660-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 6
+ clock-names:
+ oneOf:
+ - items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: bus
+ - items:
+ - const: cfg_noc
+ - const: core
+ - const: sleep
+ - const: mock_utmi
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcm2290-dwc3
+ - qcom,sm6115-dwc3
+ - qcom,sm6125-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8450-dwc3
+ - qcom,sm8550-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: xo
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8350-dwc3
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 6
+ clock-names:
+ minItems: 5
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: xo
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq4019-dwc3
+ - qcom,ipq6018-dwc3
+ - qcom,ipq8064-dwc3
+ - qcom,ipq8074-dwc3
+ - qcom,msm8994-dwc3
+ - qcom,qcs404-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sdm670-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
+ - qcom,sdx75-dwc3
+ - qcom,sm4250-dwc3
+ - qcom,sm6125-dwc3
+ - qcom,sm6350-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8350-dwc3
+ - qcom,sm8450-dwc3
+ - qcom,sm8550-dwc3
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB2 bus.
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB3 bus.
+ - description: Wakeup event on DM line.
+ - description: Wakeup event on DP line.
+ interrupt-names:
+ items:
+ - const: hs_phy_irq
+ - const: ss_phy_irq
+ - const: dm_hs_phy_irq
+ - const: dp_hs_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,sm6115-dwc3
+ then:
+ properties:
+ interrupts:
+ maxItems: 2
+ interrupt-names:
+ items:
+ - const: hs_phy_irq
+ - const: ss_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq5018-dwc3
+ - qcom,ipq5332-dwc3
+ - qcom,sdm660-dwc3
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: hs_phy_irq
+ - const: ss_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-dwc3
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 4
+ interrupt-names:
+ minItems: 3
+ items:
+ - const: hs_phy_irq
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+ - const: ss_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3
+ then:
+ properties:
+ interrupts:
+ maxItems: 4
+ interrupt-names:
+ items:
+ - const: pwr_event
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+ - const: ss_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sa8775p-dwc3
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 4
+ interrupt-names:
+ minItems: 3
+ items:
+ - const: pwr_event
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+ - const: ss_phy_irq
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@a6f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x740 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+ };