Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/ti/omap/am335x-baltos-ir3220.dts b/src/arm/ti/omap/am335x-baltos-ir3220.dts
new file mode 100644
index 0000000..ea4f8dd
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos-ir3220.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+ tca6416_pins: tca6416-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+ "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+ "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+ "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "UART2_RX",
+ "UART2_TX",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "WLAN_BTN",
+ "W_DISABLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART1_CTSN",
+ "UART1_RTSN",
+ "UART1_RX",
+ "UART1_TX",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "TCA6416_INT",
+ "RMII1_TXD1",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "RMII1_TXD0",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "NC",
+ "NC",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "UART2_DTR",
+ "UART2_DSR",
+ "UART2_DCD",
+ "UART2_RI",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SD_CD",
+ "SD_WP",
+ "RMII1_RXD1",
+ "RMII1_RXD0",
+ "UART1_DTR",
+ "UART1_DSR",
+ "UART1_DCD",
+ "UART1_RI",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "RMII1_CRS_DV",
+ "RMII1_RXER",
+ "RMII1_TXEN",
+ "3G_PWR_EN",
+ "UART2_CTSN",
+ "UART2_RTSN",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB1_DRVVBUS",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};