Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/powerpc/xcalibur1501.dts b/src/powerpc/xcalibur1501.dts
new file mode 100644
index 0000000..46c25bd
--- /dev/null
+++ b/src/powerpc/xcalibur1501.dts
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
+ */
+
+/dts-v1/;
+/ {
+ model = "xes,xcalibur1501";
+ compatible = "xes,xcalibur1501", "xes,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot
+ };
+
+ localbus@ef005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xef005000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+ /* Local bus region mappings */
+ ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Flash 1 */
+ 1 0 0 0xf0000000 0x8000000 /* CS1: Flash 2 */
+ 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */
+ 3 0 0 0xef840000 0x40000 /* CS3: NAND CE2 */
+ 4 0 0 0xe9000000 0x100000>; /* CS4: USB */
+
+ nor-boot@0,0 {
+ compatible = "amd,s29gl01gp", "cfi-flash";
+ bank-width = <2>;
+ reg = <0 0 0x8000000>; /* 128MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "Primary user space";
+ reg = <0x00000000 0x6f00000>; /* 111 MB */
+ };
+ partition@6f00000 {
+ label = "Primary kernel";
+ reg = <0x6f00000 0x1000000>; /* 16 MB */
+ };
+ partition@7f00000 {
+ label = "Primary DTB";
+ reg = <0x7f00000 0x40000>; /* 256 KB */
+ };
+ partition@7f40000 {
+ label = "Primary U-Boot environment";
+ reg = <0x7f40000 0x40000>; /* 256 KB */
+ };
+ partition@7f80000 {
+ label = "Primary U-Boot";
+ reg = <0x7f80000 0x80000>; /* 512 KB */
+ read-only;
+ };
+ };
+
+ nor-alternate@1,0 {
+ compatible = "amd,s29gl01gp", "cfi-flash";
+ bank-width = <2>;
+ //reg = <0xf0000000 0x08000000>; /* 128MB */
+ reg = <1 0 0x8000000>; /* 128MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "Secondary user space";
+ reg = <0x00000000 0x6f00000>; /* 111 MB */
+ };
+ partition@6f00000 {
+ label = "Secondary kernel";
+ reg = <0x6f00000 0x1000000>; /* 16 MB */
+ };
+ partition@7f00000 {
+ label = "Secondary DTB";
+ reg = <0x7f00000 0x40000>; /* 256 KB */
+ };
+ partition@7f40000 {
+ label = "Secondary U-Boot environment";
+ reg = <0x7f40000 0x40000>; /* 256 KB */
+ };
+ partition@7f80000 {
+ label = "Secondary U-Boot";
+ reg = <0x7f80000 0x80000>; /* 512 KB */
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+ * Micron MT29F8G08DAA (2x 512 MB), or Micron
+ * MT29F16G08FAA (2x 1 GB), depending on the build
+ * configuration
+ */
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <2 0 0x40000>;
+ /* U-Boot should fix this up if chip size > 1 GB */
+ partition@0 {
+ label = "NAND Filesystem";
+ reg = <0 0x40000000>;
+ };
+ };
+
+ usb@4,0 {
+ compatible = "nxp,usb-isp1761";
+ reg = <4 0 0x100000>;
+ bus-width = <32>;
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ };
+ };
+
+ soc8572@ef000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ ranges = <0x0 0 0xef000000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2, 1M
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ temp-sensor@48 {
+ compatible = "dallas,ds1631", "dallas,ds1621";
+ reg = <0x48>;
+ };
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ cpu-supervisor@51 {
+ compatible = "dallas,ds4510";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,at24c128b";
+ reg = <0x54>;
+ };
+
+ rtc@68 {
+ compatible = "st,m41t00",
+ "dallas,ds1338";
+ reg = <0x68>;
+ };
+
+ pcie-switch@6a {
+ compatible = "plx,pex8648";
+ reg = <0x6a>;
+ };
+
+ /* On-board signals for VID, flash, serial */
+ gpio1: gpio@18 {
+ compatible = "nxp,pca9557";
+ reg = <0x18>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ /* PMC0/XMC0 signals */
+ gpio2: gpio@1c {
+ compatible = "nxp,pca9557";
+ reg = <0x1c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ /* PMC1/XMC1 signals */
+ gpio3: gpio@1d {
+ compatible = "nxp,pca9557";
+ reg = <0x1d>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ /* CompactPCI signals (sysen, GA[4:0]) */
+ gpio4: gpio@1e {
+ compatible = "nxp,pca9557";
+ reg = <0x1e>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ /* CompactPCI J5 GPIO and FAL/DEG/PRST */
+ gpio5: gpio@1f {
+ compatible = "nxp,pca9557";
+ reg = <0x1f>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ /* eTSEC 1 front panel 0 */
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1>;
+ reg = <0x1>;
+ };
+ phy1: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1>;
+ reg = <0x2>;
+ };
+ phy2: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x3>;
+ };
+ phy3: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x4>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC 2 front panel 1 */
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "sgmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC 3 PICMG2.16 backplane port 0 */
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "sgmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC 4 PICMG2.16 backplane port 1 */
+ enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "sgmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* UART0 */
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ /* UART1 */
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ gpio0: gpio@f000 {
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x1000>;
+ interrupts = <47 2>;
+ interrupt-parent = <&mpic>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&gpio0 4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&gpio0 5 1>;
+ };
+
+ red {
+ label = "Red";
+ gpios = <&gpio0 6 1>;
+ };
+
+ green {
+ label = "Green";
+ gpios = <&gpio0 7 1>;
+ };
+ };
+
+ /* PME (pattern-matcher) */
+ pme@10000 {
+ compatible = "fsl,mpc8572-pme", "pme8572";
+ reg = <0x10000 0x5000>;
+ interrupts = <57 2 64 2 65 2 66 2 67 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ tlu@2f000 {
+ compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+ reg = <0x2f000 0x1000>;
+ interrupts = <61 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ tlu@15000 {
+ compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+ reg = <0x15000 0x1000>;
+ interrupts = <75 2>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ /*
+ * PCI Express controller 3 @ ef008000 is not used.
+ * This would have been pci0 on other mpc85xx platforms.
+ *
+ * PCI Express controller 2 @ ef009000 is not used.
+ * This would have been pci1 on other mpc85xx platforms.
+ */
+
+ /* PCI Express controller 1, wired to PEX8648 PCIe switch */
+ pci2: pcie@ef00a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xef00a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+ 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};