| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board. |
| * Adrien Grassein <adrien.grassein@gmail.com.com> |
| */ |
| /dts-v1/; |
| #include "imx8mm.dtsi" |
| |
| / { |
| model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; |
| compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; |
| |
| reg_vref_1v8: regulator-vref-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| reg_vref_3v3: regulator-vref-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_wlan_vmmc: regulator-wlan-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_wlan_vmmc>; |
| regulator-name = "reg_wlan_vmmc"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| sound-wm8960 { |
| audio-cpu = <&sai1>; |
| audio-codec = <&wm8960>; |
| audio-routing = |
| "Headphone Jack", "HP_L", |
| "Headphone Jack", "HP_R", |
| "Ext Spk", "SPK_LP", |
| "Ext Spk", "SPK_LN", |
| "Ext Spk", "SPK_RP", |
| "Ext Spk", "SPK_RN", |
| "RINPUT1", "Mic Jack", |
| "Mic Jack", "MICB"; |
| compatible = "fsl,imx-audio-wm8960"; |
| /* JD2: hp detect high for headphone*/ |
| hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| /* Jack is not stuffed */ |
| mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| model = "wm8960-audio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sound_wm8960>; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <®_buck3>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <®_buck3>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <®_buck3>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <®_buck3>; |
| }; |
| |
| /* J15 */ |
| &ecspi2 { |
| assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; |
| assigned-clock-rates = <40000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <4>; |
| interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| }; |
| |
| &flexspi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexspi>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic@8 { |
| compatible = "nxp,pf8121a"; |
| reg = <0x8>; |
| |
| regulators { |
| reg_ldo1: ldo1 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_ldo2: ldo2 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_ldo3: ldo3 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_ldo4: ldo4 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck1: buck1 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck2: buck2 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck3: buck3 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck4: buck4 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck5: buck5 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck6: buck6 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_buck7: buck7 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_vsnvs: vsnvs { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| i2c-mux@70 { |
| compatible = "nxp,pca9540"; |
| reg = <0x70>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c3@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| rtc@68 { |
| compatible = "microcrystal,rv4162"; |
| reg = <0x68>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3a_rv4162>; |
| interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>; |
| wakeup-source; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| wm8960: codec@1a { |
| compatible = "wlf,wm8960"; |
| reg = <0x1a>; |
| clocks = <&clk IMX8MM_CLK_SAI1_ROOT>; |
| clock-names = "mclk"; |
| wlf,shared-lrclk; |
| #sound-dai-cells = <0>; |
| }; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| assigned-clocks = <&clk IMX8MM_CLK_PWM2>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; |
| assigned-clock-rates = <40000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| status = "okay"; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| status = "okay"; |
| }; |
| |
| /* BT */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* console */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| /* J15 */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* J9 */ |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| /* eMMC */ |
| &usdhc1 { |
| bus-width = <8>; |
| sdhci-caps-mask = <0x80000000 0x0>; |
| non-removable; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| vmmc-supply = <®_vref_3v3>; |
| vqmmc-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| /* sdcard */ |
| &usdhc2 { |
| bus-width = <4>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| vqmmc-supply = <®_ldo2>; |
| status = "okay"; |
| }; |
| |
| /* wlan */ |
| &usdhc3 { |
| bus-width = <4>; |
| sdhci-caps-mask = <0x2 0x0>; |
| non-removable; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| vmmc-supply = <®_wlan_vmmc>; |
| vqmmc-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| /* USB OTG port */ |
| &usbotg1 { |
| dr_mode = "otg"; |
| over-current-active-low; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| power-active-high; |
| status = "okay"; |
| }; |
| |
| /* USB Host port */ |
| &usbotg2 { |
| dr_mode = "host"; |
| over-current-active-low; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2>; |
| power-active-high; |
| /* |
| * FIXME: having USB2 enabled hangs the boot just after: |
| *[ 1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller |
| *[ 1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 |
| *[ 1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 |
| *[ 1.687730] hub 2-0:1.0: USB hub found |
| *[ 1.691528] hub 2-0:1.0: 1 port detected |
| */ |
| status = "disabled"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 |
| MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 |
| MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 |
| MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x159 |
| >; |
| }; |
| |
| pinctrl_flexspi: flexspigrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 |
| MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 |
| MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 |
| MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 |
| MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 |
| MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 |
| >; |
| }; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 |
| MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 |
| MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 |
| MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 |
| MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16 |
| >; |
| }; |
| |
| pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| /* wm8960 */ |
| MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 |
| MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 |
| MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 |
| MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 |
| MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| /* Bluetooth PCM */ |
| MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_sound_wm8960: sound-wm8960grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x80 |
| MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x80 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 |
| MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 |
| MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 |
| MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 |
| MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 |
| MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 |
| MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 |
| MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 |
| MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x16 |
| MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x156 |
| >; |
| }; |
| |
| pinctrl_usbotg2: usbotg2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x16 |
| MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x15 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 |
| MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x141 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 |
| MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 |
| MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x03 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140 |
| >; |
| }; |
| }; |