| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * IPQ9574 SoC device tree source |
| * |
| * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. |
| * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| |
| #include <dt-bindings/clock/qcom,apss-ipq.h> |
| #include <dt-bindings/clock/qcom,ipq9574-gcc.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/qcom,ipq9574-gcc.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| clocks { |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| xo_board_clk: xo-board-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a73"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-supply = <&ipq9574_s1>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a73"; |
| reg = <0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-supply = <&ipq9574_s1>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a73"; |
| reg = <0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-supply = <&ipq9574_s1>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a73"; |
| reg = <0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-supply = <&ipq9574_s1>; |
| #cooling-cells = <2>; |
| }; |
| |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-ipq9574", "qcom,scm"; |
| qcom,dload-mode = <&tcsr 0x6100>; |
| }; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0x0 0x40000000 0x0 0x0>; |
| }; |
| |
| cpu_opp_table: opp-table-cpu { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-936000000 { |
| opp-hz = /bits/ 64 <936000000>; |
| opp-microvolt = <725000>; |
| clock-latency-ns = <200000>; |
| }; |
| |
| opp-1104000000 { |
| opp-hz = /bits/ 64 <1104000000>; |
| opp-microvolt = <787500>; |
| clock-latency-ns = <200000>; |
| }; |
| |
| opp-1416000000 { |
| opp-hz = /bits/ 64 <1416000000>; |
| opp-microvolt = <862500>; |
| clock-latency-ns = <200000>; |
| }; |
| |
| opp-1488000000 { |
| opp-hz = /bits/ 64 <1488000000>; |
| opp-microvolt = <925000>; |
| clock-latency-ns = <200000>; |
| }; |
| |
| opp-1800000000 { |
| opp-hz = /bits/ 64 <1800000000>; |
| opp-microvolt = <987500>; |
| clock-latency-ns = <200000>; |
| }; |
| |
| opp-2208000000 { |
| opp-hz = /bits/ 64 <2208000000>; |
| opp-microvolt = <1062500>; |
| clock-latency-ns = <200000>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a73-pmu"; |
| interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| rpm: remoteproc { |
| compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc"; |
| |
| glink-edge { |
| compatible = "qcom,glink-rpm"; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| mboxes = <&apcs_glb 0>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-ipq9574"; |
| qcom,glink-channels = "rpm_requests"; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| bootloader@4a100000 { |
| reg = <0x0 0x4a100000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| sbl@4a500000 { |
| reg = <0x0 0x4a500000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tz_region: tz@4a600000 { |
| reg = <0x0 0x4a600000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| smem@4aa00000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0x4aa00000 0x0 0x100000>; |
| hwlocks = <&tcsr_mutex 3>; |
| no-map; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| |
| rpm_msg_ram: sram@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x00060000 0x6000>; |
| }; |
| |
| rng: rng@e3000 { |
| compatible = "qcom,prng-ee"; |
| reg = <0x000e3000 0x1000>; |
| clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| clock-names = "core"; |
| }; |
| |
| qfprom: efuse@a4000 { |
| compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; |
| reg = <0x000a4000 0x5a1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| cryptobam: dma-controller@704000 { |
| compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; |
| reg = <0x00704000 0x20000>; |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| qcom,ee = <1>; |
| qcom,controlled-remotely; |
| }; |
| |
| crypto: crypto@73a000 { |
| compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; |
| reg = <0x0073a000 0x6000>; |
| clocks = <&gcc GCC_CRYPTO_AHB_CLK>, |
| <&gcc GCC_CRYPTO_AXI_CLK>, |
| <&gcc GCC_CRYPTO_CLK>; |
| clock-names = "iface", "bus", "core"; |
| dmas = <&cryptobam 2>, <&cryptobam 3>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| tsens: thermal-sensor@4a9000 { |
| compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; |
| reg = <0x004a9000 0x1000>, |
| <0x004a8000 0x1000>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "combined"; |
| #qcom,sensors = <16>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tlmm: pinctrl@1000000 { |
| compatible = "qcom,ipq9574-tlmm"; |
| reg = <0x01000000 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 65>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| uart2_pins: uart2-state { |
| pins = "gpio34", "gpio35"; |
| function = "blsp2_uart"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,ipq9574-gcc"; |
| reg = <0x01800000 0x80000>; |
| clocks = <&xo_board_clk>, |
| <&sleep_clk>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| tcsr_mutex: hwlock@1905000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x01905000 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: syscon@1937000 { |
| compatible = "qcom,tcsr-ipq9574", "syscon"; |
| reg = <0x01937000 0x21000>; |
| }; |
| |
| sdhc_1: mmc@7804000 { |
| compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x07804000 0x1000>, <0x07805000 0x1000>; |
| reg-names = "hc", "cqhci"; |
| |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&xo_board_clk>; |
| clock-names = "iface", "core", "xo"; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| blsp_dma: dma-controller@7884000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07884000 0x2b000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| }; |
| |
| blsp1_uart0: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078af000 0x200>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart1: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b0000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart2: serial@78b1000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b1000 0x200>; |
| interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart3: serial@78b2000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b2000 0x200>; |
| interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart4: serial@78b3000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b3000 0x200>; |
| interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart5: serial@78b4000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b4000 0x200>; |
| interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi0: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b5000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 12>, <&blsp_dma 13>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c1: i2c@78b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; |
| assigned-clock-rates = <50000000>; |
| dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi1: spi@78b6000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c2: i2c@78b7000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; |
| assigned-clock-rates = <50000000>; |
| dmas = <&blsp_dma 16>, <&blsp_dma 17>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi2: spi@78b7000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 16>, <&blsp_dma 17>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c3: i2c@78b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; |
| assigned-clock-rates = <50000000>; |
| dmas = <&blsp_dma 18>, <&blsp_dma 19>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi3: spi@78b8000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| spi-max-frequency = <50000000>; |
| clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 18>, <&blsp_dma 19>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c4: i2c@78b9000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; |
| assigned-clock-rates = <50000000>; |
| dmas = <&blsp_dma 20>, <&blsp_dma 21>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi4: spi@78b9000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 20>, <&blsp_dma 21>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| usb_0_qusbphy: phy@7b000 { |
| compatible = "qcom,ipq9574-qusb2-phy"; |
| reg = <0x0007b000 0x180>; |
| #phy-cells = <0>; |
| |
| clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, |
| <&xo_board_clk>; |
| clock-names = "cfg_ahb", |
| "ref"; |
| |
| resets = <&gcc GCC_QUSB2_0_PHY_BCR>; |
| status = "disabled"; |
| }; |
| |
| usb_0_qmpphy: phy@7d000 { |
| compatible = "qcom,ipq9574-qmp-usb3-phy"; |
| reg = <0x0007d000 0xa00>; |
| #phy-cells = <0>; |
| |
| clocks = <&gcc GCC_USB0_AUX_CLK>, |
| <&xo_board_clk>, |
| <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, |
| <&gcc GCC_USB0_PIPE_CLK>; |
| clock-names = "aux", |
| "ref", |
| "cfg_ahb", |
| "pipe"; |
| |
| resets = <&gcc GCC_USB0_PHY_BCR>, |
| <&gcc GCC_USB3PHY_0_PHY_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb0_pipe_clk"; |
| |
| status = "disabled"; |
| }; |
| |
| usb3: usb@8af8800 { |
| compatible = "qcom,ipq9574-dwc3", "qcom,dwc3"; |
| reg = <0x08af8800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clocks = <&gcc GCC_SNOC_USB_CLK>, |
| <&gcc GCC_USB0_MASTER_CLK>, |
| <&gcc GCC_ANOC_USB_AXI_CLK>, |
| <&gcc GCC_USB0_SLEEP_CLK>, |
| <&gcc GCC_USB0_MOCK_UTMI_CLK>; |
| |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, |
| <&gcc GCC_USB0_MOCK_UTMI_CLK>; |
| assigned-clock-rates = <200000000>, |
| <24000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event"; |
| |
| resets = <&gcc GCC_USB_BCR>; |
| status = "disabled"; |
| |
| usb_0_dwc3: usb@8a00000 { |
| compatible = "snps,dwc3"; |
| reg = <0x8a00000 0xcd00>; |
| clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; |
| clock-names = "ref"; |
| interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| tx-fifo-resize; |
| snps,is-utmi-l1-suspend; |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_u3_susphy_quirk; |
| }; |
| }; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| reg = <0x0b000000 0x1000>, /* GICD */ |
| <0x0b002000 0x2000>, /* GICC */ |
| <0x0b001000 0x1000>, /* GICH */ |
| <0x0b004000 0x2000>; /* GICV */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| ranges = <0 0x0b00c000 0x3000>; |
| |
| v2m0: v2m@0 { |
| compatible = "arm,gic-v2m-frame"; |
| reg = <0x00000000 0xffd>; |
| msi-controller; |
| }; |
| |
| v2m1: v2m@1000 { |
| compatible = "arm,gic-v2m-frame"; |
| reg = <0x00001000 0xffd>; |
| msi-controller; |
| }; |
| |
| v2m2: v2m@2000 { |
| compatible = "arm,gic-v2m-frame"; |
| reg = <0x00002000 0xffd>; |
| msi-controller; |
| }; |
| }; |
| |
| watchdog: watchdog@b017000 { |
| compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt"; |
| reg = <0x0b017000 0x1000>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&sleep_clk>; |
| timeout-sec = <30>; |
| }; |
| |
| apcs_glb: mailbox@b111000 { |
| compatible = "qcom,ipq9574-apcs-apps-global", |
| "qcom,ipq6018-apcs-apps-global"; |
| reg = <0x0b111000 0x1000>; |
| #clock-cells = <1>; |
| clocks = <&a73pll>, <&xo_board_clk>; |
| clock-names = "pll", "xo"; |
| #mbox-cells = <1>; |
| }; |
| |
| a73pll: clock@b116000 { |
| compatible = "qcom,ipq9574-a73pll"; |
| reg = <0x0b116000 0x40>; |
| #clock-cells = <0>; |
| clocks = <&xo_board_clk>; |
| clock-names = "xo"; |
| }; |
| |
| timer@b120000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0b120000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| frame@b120000 { |
| reg = <0x0b121000 0x1000>, |
| <0x0b122000 0x1000>; |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| frame@b123000 { |
| reg = <0x0b123000 0x1000>; |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@b124000 { |
| reg = <0x0b124000 0x1000>; |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@b125000 { |
| reg = <0x0b125000 0x1000>; |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@b126000 { |
| reg = <0x0b126000 0x1000>; |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@b127000 { |
| reg = <0x0b127000 0x1000>; |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@b128000 { |
| reg = <0x0b128000 0x1000>; |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| nss-top-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 3>; |
| |
| trips { |
| nss-top-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ubi-0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 4>; |
| |
| trips { |
| ubi_0-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ubi-1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 5>; |
| |
| trips { |
| ubi_1-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ubi-2-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 6>; |
| |
| trips { |
| ubi_2-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ubi-3-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 7>; |
| |
| trips { |
| ubi_3-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 8>; |
| |
| trips { |
| cpu-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 9>; |
| |
| trips { |
| cpu-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 10>; |
| |
| trips { |
| cpu0_crit: cpu-critical { |
| temperature = <120000>; |
| hysteresis = <10000>; |
| type = "critical"; |
| }; |
| |
| cpu0_alert: cpu-passive { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu0_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 11>; |
| |
| trips { |
| cpu1_crit: cpu-critical { |
| temperature = <120000>; |
| hysteresis = <10000>; |
| type = "critical"; |
| }; |
| |
| cpu1_alert: cpu-passive { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu1_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 12>; |
| |
| trips { |
| cpu2_crit: cpu-critical { |
| temperature = <120000>; |
| hysteresis = <10000>; |
| type = "critical"; |
| }; |
| |
| cpu2_alert: cpu-passive { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu2_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 13>; |
| |
| trips { |
| cpu3_crit: cpu-critical { |
| temperature = <120000>; |
| hysteresis = <10000>; |
| type = "critical"; |
| }; |
| |
| cpu3_alert: cpu-passive { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu3_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| wcss-phyb-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 14>; |
| |
| trips { |
| wcss_phyb-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| top-glue-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tsens 15>; |
| |
| trips { |
| top_glue-critical { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |