| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2021 Rockchip Electronics Co., Ltd. |
| */ |
| |
| #include <dt-bindings/clock/rockchip,rk3588-cru.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/power/rk3588-power.h> |
| #include <dt-bindings/reset/rockchip,rk3588-cru.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/ata/ahci.h> |
| |
| / { |
| compatible = "rockchip,rk3588"; |
| |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu_l0>; |
| }; |
| core1 { |
| cpu = <&cpu_l1>; |
| }; |
| core2 { |
| cpu = <&cpu_l2>; |
| }; |
| core3 { |
| cpu = <&cpu_l3>; |
| }; |
| }; |
| cluster1 { |
| core0 { |
| cpu = <&cpu_b0>; |
| }; |
| core1 { |
| cpu = <&cpu_b1>; |
| }; |
| }; |
| cluster2 { |
| core0 { |
| cpu = <&cpu_b2>; |
| }; |
| core1 { |
| cpu = <&cpu_b3>; |
| }; |
| }; |
| }; |
| |
| cpu_l0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <530>; |
| clocks = <&scmi_clk SCMI_CLK_CPUL>; |
| assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; |
| assigned-clock-rates = <816000000>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l0>; |
| dynamic-power-coefficient = <228>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_l1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x100>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <530>; |
| clocks = <&scmi_clk SCMI_CLK_CPUL>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l1>; |
| dynamic-power-coefficient = <228>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_l2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x200>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <530>; |
| clocks = <&scmi_clk SCMI_CLK_CPUL>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l2>; |
| dynamic-power-coefficient = <228>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_l3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x300>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <530>; |
| clocks = <&scmi_clk SCMI_CLK_CPUL>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <32768>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <128>; |
| d-cache-size = <32768>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&l2_cache_l3>; |
| dynamic-power-coefficient = <228>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_b0: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x400>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&scmi_clk SCMI_CLK_CPUB01>; |
| assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; |
| assigned-clock-rates = <816000000>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <65536>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <65536>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&l2_cache_b0>; |
| dynamic-power-coefficient = <416>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_b1: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x500>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&scmi_clk SCMI_CLK_CPUB01>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <65536>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <65536>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&l2_cache_b1>; |
| dynamic-power-coefficient = <416>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_b2: cpu@600 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x600>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&scmi_clk SCMI_CLK_CPUB23>; |
| assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; |
| assigned-clock-rates = <816000000>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <65536>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <65536>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&l2_cache_b2>; |
| dynamic-power-coefficient = <416>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu_b3: cpu@700 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x700>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| clocks = <&scmi_clk SCMI_CLK_CPUB23>; |
| cpu-idle-states = <&CPU_SLEEP>; |
| i-cache-size = <65536>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <65536>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&l2_cache_b3>; |
| dynamic-power-coefficient = <416>; |
| #cooling-cells = <2>; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| CPU_SLEEP: cpu-sleep { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <100>; |
| exit-latency-us = <120>; |
| min-residency-us = <1000>; |
| }; |
| }; |
| |
| l2_cache_l0: l2-cache-l0 { |
| compatible = "cache"; |
| cache-size = <131072>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l1: l2-cache-l1 { |
| compatible = "cache"; |
| cache-size = <131072>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l2: l2-cache-l2 { |
| compatible = "cache"; |
| cache-size = <131072>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_l3: l2-cache-l3 { |
| compatible = "cache"; |
| cache-size = <131072>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_b0: l2-cache-b0 { |
| compatible = "cache"; |
| cache-size = <524288>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_b1: l2-cache-b1 { |
| compatible = "cache"; |
| cache-size = <524288>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_b2: l2-cache-b2 { |
| compatible = "cache"; |
| cache-size = <524288>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l2_cache_b3: l2-cache-b3 { |
| compatible = "cache"; |
| cache-size = <524288>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&l3_cache>; |
| }; |
| |
| l3_cache: l3-cache { |
| compatible = "cache"; |
| cache-size = <3145728>; |
| cache-line-size = <64>; |
| cache-sets = <4096>; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| |
| firmware { |
| optee: optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| |
| scmi: scmi { |
| compatible = "arm,scmi-smc"; |
| arm,smc-id = <0x82000010>; |
| shmem = <&scmi_shmem>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| scmi_clk: protocol@14 { |
| reg = <0x14>; |
| #clock-cells = <1>; |
| }; |
| |
| scmi_reset: protocol@16 { |
| reg = <0x16>; |
| #reset-cells = <1>; |
| }; |
| }; |
| }; |
| |
| pmu-a55 { |
| compatible = "arm,cortex-a55-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>; |
| }; |
| |
| pmu-a76 { |
| compatible = "arm,cortex-a76-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| spll: clock-0 { |
| compatible = "fixed-clock"; |
| clock-frequency = <702000000>; |
| clock-output-names = "spll"; |
| #clock-cells = <0>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; |
| }; |
| |
| xin24m: clock-1 { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| xin32k: clock-2 { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "xin32k"; |
| #clock-cells = <0>; |
| }; |
| |
| pmu_sram: sram@10f000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x0010f000 0x0 0x100>; |
| ranges = <0 0x0 0x0010f000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| scmi_shmem: sram@0 { |
| compatible = "arm,scmi-shmem"; |
| reg = <0x0 0x100>; |
| }; |
| }; |
| |
| usb_host0_ehci: usb@fc800000 { |
| compatible = "rockchip,rk3588-ehci", "generic-ehci"; |
| reg = <0x0 0xfc800000 0x0 0x40000>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; |
| phys = <&u2phy2_host>; |
| phy-names = "usb"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host0_ohci: usb@fc840000 { |
| compatible = "rockchip,rk3588-ohci", "generic-ohci"; |
| reg = <0x0 0xfc840000 0x0 0x40000>; |
| interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; |
| phys = <&u2phy2_host>; |
| phy-names = "usb"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ehci: usb@fc880000 { |
| compatible = "rockchip,rk3588-ehci", "generic-ehci"; |
| reg = <0x0 0xfc880000 0x0 0x40000>; |
| interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; |
| phys = <&u2phy3_host>; |
| phy-names = "usb"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ohci: usb@fc8c0000 { |
| compatible = "rockchip,rk3588-ohci", "generic-ohci"; |
| reg = <0x0 0xfc8c0000 0x0 0x40000>; |
| interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; |
| phys = <&u2phy3_host>; |
| phy-names = "usb"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host2_xhci: usb@fcd00000 { |
| compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; |
| reg = <0x0 0xfcd00000 0x0 0x400000>; |
| interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>, |
| <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>, |
| <&cru CLK_PIPEPHY2_PIPE_U3_G>; |
| clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe"; |
| dr_mode = "host"; |
| phys = <&combphy2_psu PHY_TYPE_USB3>; |
| phy-names = "usb3-phy"; |
| phy_type = "utmi_wide"; |
| resets = <&cru SRST_A_USB3OTG2>; |
| snps,dis_enblslpm_quirk; |
| snps,dis-u2-freeclk-exists-quirk; |
| snps,dis-del-phy-power-chg-quirk; |
| snps,dis-tx-ipgap-linecheck-quirk; |
| snps,dis_rxdet_inp3_quirk; |
| status = "disabled"; |
| }; |
| |
| pmu1grf: syscon@fd58a000 { |
| compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; |
| reg = <0x0 0xfd58a000 0x0 0x10000>; |
| }; |
| |
| sys_grf: syscon@fd58c000 { |
| compatible = "rockchip,rk3588-sys-grf", "syscon"; |
| reg = <0x0 0xfd58c000 0x0 0x1000>; |
| }; |
| |
| php_grf: syscon@fd5b0000 { |
| compatible = "rockchip,rk3588-php-grf", "syscon"; |
| reg = <0x0 0xfd5b0000 0x0 0x1000>; |
| }; |
| |
| pipe_phy0_grf: syscon@fd5bc000 { |
| compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; |
| reg = <0x0 0xfd5bc000 0x0 0x100>; |
| }; |
| |
| pipe_phy2_grf: syscon@fd5c4000 { |
| compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; |
| reg = <0x0 0xfd5c4000 0x0 0x100>; |
| }; |
| |
| usb2phy2_grf: syscon@fd5d8000 { |
| compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; |
| reg = <0x0 0xfd5d8000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u2phy2: usb2-phy@8000 { |
| compatible = "rockchip,rk3588-usb2phy"; |
| reg = <0x8000 0x10>; |
| interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; |
| resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; |
| reset-names = "phy", "apb"; |
| clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy2"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy2_host: host-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usb2phy3_grf: syscon@fd5dc000 { |
| compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; |
| reg = <0x0 0xfd5dc000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u2phy3: usb2-phy@c000 { |
| compatible = "rockchip,rk3588-usb2phy"; |
| reg = <0xc000 0x10>; |
| interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; |
| resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; |
| reset-names = "phy", "apb"; |
| clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy3"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy3_host: host-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| ioc: syscon@fd5f0000 { |
| compatible = "rockchip,rk3588-ioc", "syscon"; |
| reg = <0x0 0xfd5f0000 0x0 0x10000>; |
| }; |
| |
| system_sram1: sram@fd600000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0xfd600000 0x0 0x100000>; |
| ranges = <0x0 0x0 0xfd600000 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| cru: clock-controller@fd7c0000 { |
| compatible = "rockchip,rk3588-cru"; |
| reg = <0x0 0xfd7c0000 0x0 0x5c000>; |
| assigned-clocks = |
| <&cru PLL_PPLL>, <&cru PLL_AUPLL>, |
| <&cru PLL_NPLL>, <&cru PLL_GPLL>, |
| <&cru ACLK_CENTER_ROOT>, |
| <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>, |
| <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>, |
| <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>, |
| <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>, |
| <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, |
| <&cru CLK_GPU>; |
| assigned-clock-rates = |
| <1100000000>, <786432000>, |
| <850000000>, <1188000000>, |
| <702000000>, |
| <400000000>, <500000000>, |
| <800000000>, <100000000>, |
| <400000000>, <100000000>, |
| <200000000>, <500000000>, |
| <375000000>, <150000000>, |
| <200000000>; |
| rockchip,grf = <&php_grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| i2c0: i2c@fd880000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfd880000 0x0 0x1000>; |
| interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; |
| clock-names = "i2c", "pclk"; |
| pinctrl-0 = <&i2c0m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@fd890000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfd890000 0x0 0x100>; |
| interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac0 6>, <&dmac0 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart0m1_xfer>; |
| pinctrl-names = "default"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@fd8b0000 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfd8b0000 0x0 0x10>; |
| clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm0m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@fd8b0010 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfd8b0010 0x0 0x10>; |
| clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm1m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@fd8b0020 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfd8b0020 0x0 0x10>; |
| clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm2m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@fd8b0030 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfd8b0030 0x0 0x10>; |
| clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm3m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pmu: power-management@fd8d8000 { |
| compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd"; |
| reg = <0x0 0xfd8d8000 0x0 0x400>; |
| |
| power: power-controller { |
| compatible = "rockchip,rk3588-power-controller"; |
| #address-cells = <1>; |
| #power-domain-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| /* These power domains are grouped by VD_NPU */ |
| power-domain@RK3588_PD_NPU { |
| reg = <RK3588_PD_NPU>; |
| #power-domain-cells = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| power-domain@RK3588_PD_NPUTOP { |
| reg = <RK3588_PD_NPUTOP>; |
| clocks = <&cru HCLK_NPU_ROOT>, |
| <&cru PCLK_NPU_ROOT>, |
| <&cru CLK_NPU_DSU0>, |
| <&cru HCLK_NPU_CM0_ROOT>; |
| pm_qos = <&qos_npu0_mwr>, |
| <&qos_npu0_mro>, |
| <&qos_mcu_npu>; |
| #power-domain-cells = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| power-domain@RK3588_PD_NPU1 { |
| reg = <RK3588_PD_NPU1>; |
| clocks = <&cru HCLK_NPU_ROOT>, |
| <&cru PCLK_NPU_ROOT>, |
| <&cru CLK_NPU_DSU0>; |
| pm_qos = <&qos_npu1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_NPU2 { |
| reg = <RK3588_PD_NPU2>; |
| clocks = <&cru HCLK_NPU_ROOT>, |
| <&cru PCLK_NPU_ROOT>, |
| <&cru CLK_NPU_DSU0>; |
| pm_qos = <&qos_npu2>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| }; |
| /* These power domains are grouped by VD_GPU */ |
| power-domain@RK3588_PD_GPU { |
| reg = <RK3588_PD_GPU>; |
| clocks = <&cru CLK_GPU>, |
| <&cru CLK_GPU_COREGROUP>, |
| <&cru CLK_GPU_STACKS>; |
| pm_qos = <&qos_gpu_m0>, |
| <&qos_gpu_m1>, |
| <&qos_gpu_m2>, |
| <&qos_gpu_m3>; |
| #power-domain-cells = <0>; |
| }; |
| /* These power domains are grouped by VD_VCODEC */ |
| power-domain@RK3588_PD_VCODEC { |
| reg = <RK3588_PD_VCODEC>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #power-domain-cells = <0>; |
| |
| power-domain@RK3588_PD_RKVDEC0 { |
| reg = <RK3588_PD_RKVDEC0>; |
| clocks = <&cru HCLK_RKVDEC0>, |
| <&cru HCLK_VDPU_ROOT>, |
| <&cru ACLK_VDPU_ROOT>, |
| <&cru ACLK_RKVDEC0>, |
| <&cru ACLK_RKVDEC_CCU>; |
| pm_qos = <&qos_rkvdec0>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_RKVDEC1 { |
| reg = <RK3588_PD_RKVDEC1>; |
| clocks = <&cru HCLK_RKVDEC1>, |
| <&cru HCLK_VDPU_ROOT>, |
| <&cru ACLK_VDPU_ROOT>, |
| <&cru ACLK_RKVDEC1>; |
| pm_qos = <&qos_rkvdec1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_VENC0 { |
| reg = <RK3588_PD_VENC0>; |
| clocks = <&cru HCLK_RKVENC0>, |
| <&cru ACLK_RKVENC0>; |
| pm_qos = <&qos_rkvenc0_m0ro>, |
| <&qos_rkvenc0_m1ro>, |
| <&qos_rkvenc0_m2wo>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #power-domain-cells = <0>; |
| |
| power-domain@RK3588_PD_VENC1 { |
| reg = <RK3588_PD_VENC1>; |
| clocks = <&cru HCLK_RKVENC1>, |
| <&cru HCLK_RKVENC0>, |
| <&cru ACLK_RKVENC0>, |
| <&cru ACLK_RKVENC1>; |
| pm_qos = <&qos_rkvenc1_m0ro>, |
| <&qos_rkvenc1_m1ro>, |
| <&qos_rkvenc1_m2wo>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| }; |
| /* These power domains are grouped by VD_LOGIC */ |
| power-domain@RK3588_PD_VDPU { |
| reg = <RK3588_PD_VDPU>; |
| clocks = <&cru HCLK_VDPU_ROOT>, |
| <&cru ACLK_VDPU_LOW_ROOT>, |
| <&cru ACLK_VDPU_ROOT>, |
| <&cru ACLK_JPEG_DECODER_ROOT>, |
| <&cru ACLK_IEP2P0>, |
| <&cru HCLK_IEP2P0>, |
| <&cru ACLK_JPEG_ENCODER0>, |
| <&cru HCLK_JPEG_ENCODER0>, |
| <&cru ACLK_JPEG_ENCODER1>, |
| <&cru HCLK_JPEG_ENCODER1>, |
| <&cru ACLK_JPEG_ENCODER2>, |
| <&cru HCLK_JPEG_ENCODER2>, |
| <&cru ACLK_JPEG_ENCODER3>, |
| <&cru HCLK_JPEG_ENCODER3>, |
| <&cru ACLK_JPEG_DECODER>, |
| <&cru HCLK_JPEG_DECODER>, |
| <&cru ACLK_RGA2>, |
| <&cru HCLK_RGA2>; |
| pm_qos = <&qos_iep>, |
| <&qos_jpeg_dec>, |
| <&qos_jpeg_enc0>, |
| <&qos_jpeg_enc1>, |
| <&qos_jpeg_enc2>, |
| <&qos_jpeg_enc3>, |
| <&qos_rga2_mro>, |
| <&qos_rga2_mwo>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #power-domain-cells = <0>; |
| |
| |
| power-domain@RK3588_PD_AV1 { |
| reg = <RK3588_PD_AV1>; |
| clocks = <&cru PCLK_AV1>, |
| <&cru ACLK_AV1>, |
| <&cru HCLK_VDPU_ROOT>; |
| pm_qos = <&qos_av1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_RKVDEC0 { |
| reg = <RK3588_PD_RKVDEC0>; |
| clocks = <&cru HCLK_RKVDEC0>, |
| <&cru HCLK_VDPU_ROOT>, |
| <&cru ACLK_VDPU_ROOT>, |
| <&cru ACLK_RKVDEC0>; |
| pm_qos = <&qos_rkvdec0>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_RKVDEC1 { |
| reg = <RK3588_PD_RKVDEC1>; |
| clocks = <&cru HCLK_RKVDEC1>, |
| <&cru HCLK_VDPU_ROOT>, |
| <&cru ACLK_VDPU_ROOT>; |
| pm_qos = <&qos_rkvdec1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_RGA30 { |
| reg = <RK3588_PD_RGA30>; |
| clocks = <&cru ACLK_RGA3_0>, |
| <&cru HCLK_RGA3_0>; |
| pm_qos = <&qos_rga3_0>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| power-domain@RK3588_PD_VOP { |
| reg = <RK3588_PD_VOP>; |
| clocks = <&cru PCLK_VOP_ROOT>, |
| <&cru HCLK_VOP_ROOT>, |
| <&cru ACLK_VOP>; |
| pm_qos = <&qos_vop_m0>, |
| <&qos_vop_m1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #power-domain-cells = <0>; |
| |
| power-domain@RK3588_PD_VO0 { |
| reg = <RK3588_PD_VO0>; |
| clocks = <&cru PCLK_VO0_ROOT>, |
| <&cru PCLK_VO0_S_ROOT>, |
| <&cru HCLK_VO0_S_ROOT>, |
| <&cru ACLK_VO0_ROOT>, |
| <&cru HCLK_HDCP0>, |
| <&cru ACLK_HDCP0>, |
| <&cru HCLK_VOP_ROOT>; |
| pm_qos = <&qos_hdcp0>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| power-domain@RK3588_PD_VO1 { |
| reg = <RK3588_PD_VO1>; |
| clocks = <&cru PCLK_VO1_ROOT>, |
| <&cru PCLK_VO1_S_ROOT>, |
| <&cru HCLK_VO1_S_ROOT>, |
| <&cru HCLK_HDCP1>, |
| <&cru ACLK_HDCP1>, |
| <&cru ACLK_HDMIRX_ROOT>, |
| <&cru HCLK_VO1USB_TOP_ROOT>; |
| pm_qos = <&qos_hdcp1>, |
| <&qos_hdmirx>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_VI { |
| reg = <RK3588_PD_VI>; |
| clocks = <&cru HCLK_VI_ROOT>, |
| <&cru PCLK_VI_ROOT>, |
| <&cru HCLK_ISP0>, |
| <&cru ACLK_ISP0>, |
| <&cru HCLK_VICAP>, |
| <&cru ACLK_VICAP>; |
| pm_qos = <&qos_isp0_mro>, |
| <&qos_isp0_mwo>, |
| <&qos_vicap_m0>, |
| <&qos_vicap_m1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #power-domain-cells = <0>; |
| |
| power-domain@RK3588_PD_ISP1 { |
| reg = <RK3588_PD_ISP1>; |
| clocks = <&cru HCLK_ISP1>, |
| <&cru ACLK_ISP1>, |
| <&cru HCLK_VI_ROOT>, |
| <&cru PCLK_VI_ROOT>; |
| pm_qos = <&qos_isp1_mwo>, |
| <&qos_isp1_mro>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_FEC { |
| reg = <RK3588_PD_FEC>; |
| clocks = <&cru HCLK_FISHEYE0>, |
| <&cru ACLK_FISHEYE0>, |
| <&cru HCLK_FISHEYE1>, |
| <&cru ACLK_FISHEYE1>, |
| <&cru PCLK_VI_ROOT>; |
| pm_qos = <&qos_fisheye0>, |
| <&qos_fisheye1>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| power-domain@RK3588_PD_RGA31 { |
| reg = <RK3588_PD_RGA31>; |
| clocks = <&cru HCLK_RGA3_1>, |
| <&cru ACLK_RGA3_1>; |
| pm_qos = <&qos_rga3_1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_USB { |
| reg = <RK3588_PD_USB>; |
| clocks = <&cru PCLK_PHP_ROOT>, |
| <&cru ACLK_USB_ROOT>, |
| <&cru HCLK_USB_ROOT>, |
| <&cru HCLK_HOST0>, |
| <&cru HCLK_HOST_ARB0>, |
| <&cru HCLK_HOST1>, |
| <&cru HCLK_HOST_ARB1>; |
| pm_qos = <&qos_usb3_0>, |
| <&qos_usb3_1>, |
| <&qos_usb2host_0>, |
| <&qos_usb2host_1>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_GMAC { |
| reg = <RK3588_PD_GMAC>; |
| clocks = <&cru PCLK_PHP_ROOT>, |
| <&cru ACLK_PCIE_ROOT>, |
| <&cru ACLK_PHP_ROOT>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_PCIE { |
| reg = <RK3588_PD_PCIE>; |
| clocks = <&cru PCLK_PHP_ROOT>, |
| <&cru ACLK_PCIE_ROOT>, |
| <&cru ACLK_PHP_ROOT>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_SDIO { |
| reg = <RK3588_PD_SDIO>; |
| clocks = <&cru HCLK_SDIO>, |
| <&cru HCLK_NVM_ROOT>; |
| pm_qos = <&qos_sdio>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_AUDIO { |
| reg = <RK3588_PD_AUDIO>; |
| clocks = <&cru HCLK_AUDIO_ROOT>, |
| <&cru PCLK_AUDIO_ROOT>; |
| #power-domain-cells = <0>; |
| }; |
| power-domain@RK3588_PD_SDMMC { |
| reg = <RK3588_PD_SDMMC>; |
| pm_qos = <&qos_sdmmc>; |
| #power-domain-cells = <0>; |
| }; |
| }; |
| }; |
| |
| i2s4_8ch: i2s@fddc0000 { |
| compatible = "rockchip,rk3588-i2s-tdm"; |
| reg = <0x0 0xfddc0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; |
| clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>; |
| dmas = <&dmac2 0>; |
| dma-names = "tx"; |
| power-domains = <&power RK3588_PD_VO0>; |
| resets = <&cru SRST_M_I2S4_8CH_TX>; |
| reset-names = "tx-m"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s5_8ch: i2s@fddf0000 { |
| compatible = "rockchip,rk3588-i2s-tdm"; |
| reg = <0x0 0xfddf0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; |
| clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>; |
| dmas = <&dmac2 2>; |
| dma-names = "tx"; |
| power-domains = <&power RK3588_PD_VO1>; |
| resets = <&cru SRST_M_I2S5_8CH_TX>; |
| reset-names = "tx-m"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s9_8ch: i2s@fddfc000 { |
| compatible = "rockchip,rk3588-i2s-tdm"; |
| reg = <0x0 0xfddfc000 0x0 0x1000>; |
| interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; |
| clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>; |
| dmas = <&dmac2 23>; |
| dma-names = "rx"; |
| power-domains = <&power RK3588_PD_VO1>; |
| resets = <&cru SRST_M_I2S9_8CH_RX>; |
| reset-names = "rx-m"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| qos_gpu_m0: qos@fdf35000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf35000 0x0 0x20>; |
| }; |
| |
| qos_gpu_m1: qos@fdf35200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf35200 0x0 0x20>; |
| }; |
| |
| qos_gpu_m2: qos@fdf35400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf35400 0x0 0x20>; |
| }; |
| |
| qos_gpu_m3: qos@fdf35600 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf35600 0x0 0x20>; |
| }; |
| |
| qos_rga3_1: qos@fdf36000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf36000 0x0 0x20>; |
| }; |
| |
| qos_sdio: qos@fdf39000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf39000 0x0 0x20>; |
| }; |
| |
| qos_sdmmc: qos@fdf3d800 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf3d800 0x0 0x20>; |
| }; |
| |
| qos_usb3_1: qos@fdf3e000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf3e000 0x0 0x20>; |
| }; |
| |
| qos_usb3_0: qos@fdf3e200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf3e200 0x0 0x20>; |
| }; |
| |
| qos_usb2host_0: qos@fdf3e400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf3e400 0x0 0x20>; |
| }; |
| |
| qos_usb2host_1: qos@fdf3e600 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf3e600 0x0 0x20>; |
| }; |
| |
| qos_fisheye0: qos@fdf40000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40000 0x0 0x20>; |
| }; |
| |
| qos_fisheye1: qos@fdf40200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40200 0x0 0x20>; |
| }; |
| |
| qos_isp0_mro: qos@fdf40400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40400 0x0 0x20>; |
| }; |
| |
| qos_isp0_mwo: qos@fdf40500 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40500 0x0 0x20>; |
| }; |
| |
| qos_vicap_m0: qos@fdf40600 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40600 0x0 0x20>; |
| }; |
| |
| qos_vicap_m1: qos@fdf40800 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf40800 0x0 0x20>; |
| }; |
| |
| qos_isp1_mwo: qos@fdf41000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf41000 0x0 0x20>; |
| }; |
| |
| qos_isp1_mro: qos@fdf41100 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf41100 0x0 0x20>; |
| }; |
| |
| qos_rkvenc0_m0ro: qos@fdf60000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf60000 0x0 0x20>; |
| }; |
| |
| qos_rkvenc0_m1ro: qos@fdf60200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf60200 0x0 0x20>; |
| }; |
| |
| qos_rkvenc0_m2wo: qos@fdf60400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf60400 0x0 0x20>; |
| }; |
| |
| qos_rkvenc1_m0ro: qos@fdf61000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf61000 0x0 0x20>; |
| }; |
| |
| qos_rkvenc1_m1ro: qos@fdf61200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf61200 0x0 0x20>; |
| }; |
| |
| qos_rkvenc1_m2wo: qos@fdf61400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf61400 0x0 0x20>; |
| }; |
| |
| qos_rkvdec0: qos@fdf62000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf62000 0x0 0x20>; |
| }; |
| |
| qos_rkvdec1: qos@fdf63000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf63000 0x0 0x20>; |
| }; |
| |
| qos_av1: qos@fdf64000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf64000 0x0 0x20>; |
| }; |
| |
| qos_iep: qos@fdf66000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66000 0x0 0x20>; |
| }; |
| |
| qos_jpeg_dec: qos@fdf66200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66200 0x0 0x20>; |
| }; |
| |
| qos_jpeg_enc0: qos@fdf66400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66400 0x0 0x20>; |
| }; |
| |
| qos_jpeg_enc1: qos@fdf66600 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66600 0x0 0x20>; |
| }; |
| |
| qos_jpeg_enc2: qos@fdf66800 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66800 0x0 0x20>; |
| }; |
| |
| qos_jpeg_enc3: qos@fdf66a00 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66a00 0x0 0x20>; |
| }; |
| |
| qos_rga2_mro: qos@fdf66c00 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66c00 0x0 0x20>; |
| }; |
| |
| qos_rga2_mwo: qos@fdf66e00 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf66e00 0x0 0x20>; |
| }; |
| |
| qos_rga3_0: qos@fdf67000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf67000 0x0 0x20>; |
| }; |
| |
| qos_vdpu: qos@fdf67200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf67200 0x0 0x20>; |
| }; |
| |
| qos_npu1: qos@fdf70000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf70000 0x0 0x20>; |
| }; |
| |
| qos_npu2: qos@fdf71000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf71000 0x0 0x20>; |
| }; |
| |
| qos_npu0_mwr: qos@fdf72000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf72000 0x0 0x20>; |
| }; |
| |
| qos_npu0_mro: qos@fdf72200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf72200 0x0 0x20>; |
| }; |
| |
| qos_mcu_npu: qos@fdf72400 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf72400 0x0 0x20>; |
| }; |
| |
| qos_hdcp0: qos@fdf80000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf80000 0x0 0x20>; |
| }; |
| |
| qos_hdcp1: qos@fdf81000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf81000 0x0 0x20>; |
| }; |
| |
| qos_hdmirx: qos@fdf81200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf81200 0x0 0x20>; |
| }; |
| |
| qos_vop_m0: qos@fdf82000 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf82000 0x0 0x20>; |
| }; |
| |
| qos_vop_m1: qos@fdf82200 { |
| compatible = "rockchip,rk3588-qos", "syscon"; |
| reg = <0x0 0xfdf82200 0x0 0x20>; |
| }; |
| |
| pcie2x1l1: pcie@fe180000 { |
| compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; |
| bus-range = <0x30 0x3f>; |
| clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>, |
| <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>, |
| <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>; |
| clock-names = "aclk_mst", "aclk_slv", |
| "aclk_dbi", "pclk", |
| "aux", "pipe"; |
| device_type = "pci"; |
| interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>, |
| <0 0 0 2 &pcie2x1l1_intc 1>, |
| <0 0 0 3 &pcie2x1l1_intc 2>, |
| <0 0 0 4 &pcie2x1l1_intc 3>; |
| linux,pci-domain = <3>; |
| max-link-speed = <2>; |
| msi-map = <0x3000 &its0 0x3000 0x1000>; |
| num-lanes = <1>; |
| phys = <&combphy2_psu PHY_TYPE_PCIE>; |
| phy-names = "pcie-phy"; |
| power-domains = <&power RK3588_PD_PCIE>; |
| ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>, |
| <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>, |
| <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>; |
| reg = <0xa 0x40c00000 0x0 0x00400000>, |
| <0x0 0xfe180000 0x0 0x00010000>, |
| <0x0 0xf3000000 0x0 0x00100000>; |
| reg-names = "dbi", "apb", "config"; |
| resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>; |
| reset-names = "pwr", "pipe"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| status = "disabled"; |
| |
| pcie2x1l1_intc: legacy-interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>; |
| }; |
| }; |
| |
| pcie2x1l2: pcie@fe190000 { |
| compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; |
| bus-range = <0x40 0x4f>; |
| clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>, |
| <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>, |
| <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>; |
| clock-names = "aclk_mst", "aclk_slv", |
| "aclk_dbi", "pclk", |
| "aux", "pipe"; |
| device_type = "pci"; |
| interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>, |
| <0 0 0 2 &pcie2x1l2_intc 1>, |
| <0 0 0 3 &pcie2x1l2_intc 2>, |
| <0 0 0 4 &pcie2x1l2_intc 3>; |
| linux,pci-domain = <4>; |
| max-link-speed = <2>; |
| msi-map = <0x4000 &its0 0x4000 0x1000>; |
| num-lanes = <1>; |
| phys = <&combphy0_ps PHY_TYPE_PCIE>; |
| phy-names = "pcie-phy"; |
| power-domains = <&power RK3588_PD_PCIE>; |
| ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, |
| <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>, |
| <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>; |
| reg = <0xa 0x41000000 0x0 0x00400000>, |
| <0x0 0xfe190000 0x0 0x00010000>, |
| <0x0 0xf4000000 0x0 0x00100000>; |
| reg-names = "dbi", "apb", "config"; |
| resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>; |
| reset-names = "pwr", "pipe"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| status = "disabled"; |
| |
| pcie2x1l2_intc: legacy-interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>; |
| }; |
| }; |
| |
| dfi: dfi@fe060000 { |
| reg = <0x00 0xfe060000 0x00 0x10000>; |
| compatible = "rockchip,rk3588-dfi"; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; |
| rockchip,pmu = <&pmu1grf>; |
| }; |
| |
| gmac1: ethernet@fe1c0000 { |
| compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; |
| reg = <0x0 0xfe1c0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "macirq", "eth_wake_irq"; |
| clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, |
| <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>, |
| <&cru CLK_GMAC1_PTP_REF>; |
| clock-names = "stmmaceth", "clk_mac_ref", |
| "pclk_mac", "aclk_mac", |
| "ptp_ref"; |
| power-domains = <&power RK3588_PD_GMAC>; |
| resets = <&cru SRST_A_GMAC1>; |
| reset-names = "stmmaceth"; |
| rockchip,grf = <&sys_grf>; |
| rockchip,php-grf = <&php_grf>; |
| snps,axi-config = <&gmac1_stmmac_axi_setup>; |
| snps,mixed-burst; |
| snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; |
| snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; |
| snps,tso; |
| status = "disabled"; |
| |
| mdio1: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| }; |
| |
| gmac1_stmmac_axi_setup: stmmac-axi-config { |
| snps,blen = <0 0 0 0 16 8 4>; |
| snps,wr_osr_lmt = <4>; |
| snps,rd_osr_lmt = <8>; |
| }; |
| |
| gmac1_mtl_rx_setup: rx-queues-config { |
| snps,rx-queues-to-use = <2>; |
| queue0 {}; |
| queue1 {}; |
| }; |
| |
| gmac1_mtl_tx_setup: tx-queues-config { |
| snps,tx-queues-to-use = <2>; |
| queue0 {}; |
| queue1 {}; |
| }; |
| }; |
| |
| sata0: sata@fe210000 { |
| compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; |
| reg = <0 0xfe210000 0 0x1000>; |
| interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, |
| <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, |
| <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; |
| clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; |
| ports-implemented = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata-port@0 { |
| reg = <0>; |
| hba-port-cap = <HBA_PORT_FBSCP>; |
| phys = <&combphy0_ps PHY_TYPE_SATA>; |
| phy-names = "sata-phy"; |
| snps,rx-ts-max = <32>; |
| snps,tx-ts-max = <32>; |
| }; |
| }; |
| |
| sata2: sata@fe230000 { |
| compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; |
| reg = <0 0xfe230000 0 0x1000>; |
| interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>, |
| <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>, |
| <&cru CLK_PIPEPHY2_PIPE_ASIC_G>; |
| clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; |
| ports-implemented = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata-port@0 { |
| reg = <0>; |
| hba-port-cap = <HBA_PORT_FBSCP>; |
| phys = <&combphy2_psu PHY_TYPE_SATA>; |
| phy-names = "sata-phy"; |
| snps,rx-ts-max = <32>; |
| snps,tx-ts-max = <32>; |
| }; |
| }; |
| |
| sfc: spi@fe2b0000 { |
| compatible = "rockchip,sfc"; |
| reg = <0x0 0xfe2b0000 0x0 0x4000>; |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; |
| clock-names = "clk_sfc", "hclk_sfc"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sdmmc: mmc@fe2c0000 { |
| compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x0 0xfe2c0000 0x0 0x4000>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>, |
| <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| max-frequency = <200000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; |
| power-domains = <&power RK3588_PD_SDMMC>; |
| status = "disabled"; |
| }; |
| |
| sdio: mmc@fe2d0000 { |
| compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x00 0xfe2d0000 0x00 0x4000>; |
| interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, |
| <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| max-frequency = <200000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdiom1_pins>; |
| power-domains = <&power RK3588_PD_SDIO>; |
| status = "disabled"; |
| }; |
| |
| sdhci: mmc@fe2e0000 { |
| compatible = "rockchip,rk3588-dwcmshc"; |
| reg = <0x0 0xfe2e0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; |
| assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>; |
| assigned-clock-rates = <200000000>, <24000000>, <200000000>; |
| clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, |
| <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, |
| <&cru TMCLK_EMMC>; |
| clock-names = "core", "bus", "axi", "block", "timer"; |
| max-frequency = <200000000>; |
| pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, |
| <&emmc_cmd>, <&emmc_data_strobe>; |
| pinctrl-names = "default"; |
| resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, |
| <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, |
| <&cru SRST_T_EMMC>; |
| reset-names = "core", "bus", "axi", "block", "timer"; |
| status = "disabled"; |
| }; |
| |
| i2s0_8ch: i2s@fe470000 { |
| compatible = "rockchip,rk3588-i2s-tdm"; |
| reg = <0x0 0xfe470000 0x0 0x1000>; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; |
| clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; |
| dmas = <&dmac0 0>, <&dmac0 1>; |
| dma-names = "tx", "rx"; |
| power-domains = <&power RK3588_PD_AUDIO>; |
| resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; |
| reset-names = "tx-m", "rx-m"; |
| rockchip,trcm-sync-tx-only; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_lrck |
| &i2s0_sclk |
| &i2s0_sdi0 |
| &i2s0_sdi1 |
| &i2s0_sdi2 |
| &i2s0_sdi3 |
| &i2s0_sdo0 |
| &i2s0_sdo1 |
| &i2s0_sdo2 |
| &i2s0_sdo3>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s1_8ch: i2s@fe480000 { |
| compatible = "rockchip,rk3588-i2s-tdm"; |
| reg = <0x0 0xfe480000 0x0 0x1000>; |
| interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; |
| clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| dmas = <&dmac0 2>, <&dmac0 3>; |
| dma-names = "tx", "rx"; |
| resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; |
| reset-names = "tx-m", "rx-m"; |
| rockchip,trcm-sync-tx-only; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1m0_lrck |
| &i2s1m0_sclk |
| &i2s1m0_sdi0 |
| &i2s1m0_sdi1 |
| &i2s1m0_sdi2 |
| &i2s1m0_sdi3 |
| &i2s1m0_sdo0 |
| &i2s1m0_sdo1 |
| &i2s1m0_sdo2 |
| &i2s1m0_sdo3>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s2_2ch: i2s@fe490000 { |
| compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x0 0xfe490000 0x0 0x1000>; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>; |
| dmas = <&dmac1 0>, <&dmac1 1>; |
| dma-names = "tx", "rx"; |
| power-domains = <&power RK3588_PD_AUDIO>; |
| rockchip,trcm-sync-tx-only; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2m1_lrck |
| &i2s2m1_sclk |
| &i2s2m1_sdi |
| &i2s2m1_sdo>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s3_2ch: i2s@fe4a0000 { |
| compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x0 0xfe4a0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; |
| assigned-clock-parents = <&cru PLL_AUPLL>; |
| dmas = <&dmac1 2>, <&dmac1 3>; |
| dma-names = "tx", "rx"; |
| power-domains = <&power RK3588_PD_AUDIO>; |
| rockchip,trcm-sync-tx-only; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s3_lrck |
| &i2s3_sclk |
| &i2s3_sdi |
| &i2s3_sdo>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@fe600000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ |
| <0x0 0xfe680000 0 0x100000>; /* GICR */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-controller; |
| mbi-alias = <0x0 0xfe610000>; |
| mbi-ranges = <424 56>; |
| msi-controller; |
| ranges; |
| #address-cells = <2>; |
| #interrupt-cells = <4>; |
| #size-cells = <2>; |
| |
| its0: msi-controller@fe640000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x0 0xfe640000 0x0 0x20000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| |
| its1: msi-controller@fe660000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x0 0xfe660000 0x0 0x20000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| |
| ppi-partitions { |
| ppi_partition0: interrupt-partition-0 { |
| affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; |
| }; |
| |
| ppi_partition1: interrupt-partition-1 { |
| affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>; |
| }; |
| }; |
| }; |
| |
| dmac0: dma-controller@fea10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xfea10000 0x0 0x4000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>; |
| arm,pl330-periph-burst; |
| clocks = <&cru ACLK_DMAC0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| dmac1: dma-controller@fea30000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xfea30000 0x0 0x4000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>; |
| arm,pl330-periph-burst; |
| clocks = <&cru ACLK_DMAC1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| i2c1: i2c@fea90000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfea90000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c1m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@feaa0000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfeaa0000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c2m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@feab0000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfeab0000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c3m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@feac0000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfeac0000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c4m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@fead0000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfead0000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c5m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| timer0: timer@feae0000 { |
| compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; |
| reg = <0x0 0xfeae0000 0x0 0x20>; |
| interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| wdt: watchdog@feaf0000 { |
| compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; |
| reg = <0x0 0xfeaf0000 0x0 0x100>; |
| clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; |
| clock-names = "tclk", "pclk"; |
| interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; |
| }; |
| |
| spi0: spi@feb00000 { |
| compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xfeb00000 0x0 0x1000>; |
| interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&dmac0 14>, <&dmac0 15>; |
| dma-names = "tx", "rx"; |
| num-cs = <2>; |
| pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@feb10000 { |
| compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xfeb10000 0x0 0x1000>; |
| interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&dmac0 16>, <&dmac0 17>; |
| dma-names = "tx", "rx"; |
| num-cs = <2>; |
| pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@feb20000 { |
| compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xfeb20000 0x0 0x1000>; |
| interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&dmac1 15>, <&dmac1 16>; |
| dma-names = "tx", "rx"; |
| num-cs = <2>; |
| pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@feb30000 { |
| compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xfeb30000 0x0 0x1000>; |
| interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&dmac1 17>, <&dmac1 18>; |
| dma-names = "tx", "rx"; |
| num-cs = <2>; |
| pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@feb40000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb40000 0x0 0x100>; |
| interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac0 8>, <&dmac0 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart1m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@feb50000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb50000 0x0 0x100>; |
| interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac0 10>, <&dmac0 11>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart2m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@feb60000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb60000 0x0 0x100>; |
| interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac0 12>, <&dmac0 13>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart3m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@feb70000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb70000 0x0 0x100>; |
| interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac1 9>, <&dmac1 10>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart4m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@feb80000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb80000 0x0 0x100>; |
| interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac1 11>, <&dmac1 12>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart5m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@feb90000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeb90000 0x0 0x100>; |
| interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac1 13>, <&dmac1 14>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart6m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@feba0000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfeba0000 0x0 0x100>; |
| interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac2 7>, <&dmac2 8>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart7m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart8: serial@febb0000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfebb0000 0x0 0x100>; |
| interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac2 9>, <&dmac2 10>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart8m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart9: serial@febc0000 { |
| compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xfebc0000 0x0 0x100>; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmac2 11>, <&dmac2 12>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&uart9m1_xfer>; |
| pinctrl-names = "default"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@febd0000 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebd0000 0x0 0x10>; |
| clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm4m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm5: pwm@febd0010 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebd0010 0x0 0x10>; |
| clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm5m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm6: pwm@febd0020 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebd0020 0x0 0x10>; |
| clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm6m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm7: pwm@febd0030 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebd0030 0x0 0x10>; |
| clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm7m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm8: pwm@febe0000 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebe0000 0x0 0x10>; |
| clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm8m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm9: pwm@febe0010 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebe0010 0x0 0x10>; |
| clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm9m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm10: pwm@febe0020 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebe0020 0x0 0x10>; |
| clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm10m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm11: pwm@febe0030 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebe0030 0x0 0x10>; |
| clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm11m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm12: pwm@febf0000 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebf0000 0x0 0x10>; |
| clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm12m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm13: pwm@febf0010 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebf0010 0x0 0x10>; |
| clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm13m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm14: pwm@febf0020 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebf0020 0x0 0x10>; |
| clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm14m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm15: pwm@febf0030 { |
| compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; |
| reg = <0x0 0xfebf0030 0x0 0x10>; |
| clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; |
| clock-names = "pwm", "pclk"; |
| pinctrl-0 = <&pwm15m0_pins>; |
| pinctrl-names = "default"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tsadc: tsadc@fec00000 { |
| compatible = "rockchip,rk3588-tsadc"; |
| reg = <0x0 0xfec00000 0x0 0x400>; |
| interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; |
| clock-names = "tsadc", "apb_pclk"; |
| assigned-clocks = <&cru CLK_TSADC>; |
| assigned-clock-rates = <2000000>; |
| resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; |
| reset-names = "tsadc-apb", "tsadc"; |
| rockchip,hw-tshut-temp = <120000>; |
| rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ |
| rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ |
| pinctrl-0 = <&tsadc_gpio_func>; |
| pinctrl-1 = <&tsadc_shut>; |
| pinctrl-names = "gpio", "otpout"; |
| #thermal-sensor-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| saradc: adc@fec10000 { |
| compatible = "rockchip,rk3588-saradc"; |
| reg = <0x0 0xfec10000 0x0 0x10000>; |
| interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; |
| #io-channel-cells = <1>; |
| clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; |
| clock-names = "saradc", "apb_pclk"; |
| resets = <&cru SRST_P_SARADC>; |
| reset-names = "saradc-apb"; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@fec80000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfec80000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c6m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@fec90000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfec90000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c7m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@feca0000 { |
| compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; |
| reg = <0x0 0xfeca0000 0x0 0x1000>; |
| clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-0 = <&i2c8m0_xfer>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@fecb0000 { |
| compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xfecb0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&dmac2 13>, <&dmac2 14>; |
| dma-names = "tx", "rx"; |
| num-cs = <2>; |
| pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| otp: efuse@fecc0000 { |
| compatible = "rockchip,rk3588-otp"; |
| reg = <0x0 0xfecc0000 0x0 0x400>; |
| clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, |
| <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; |
| clock-names = "otp", "apb_pclk", "phy", "arb"; |
| resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, |
| <&cru SRST_OTPC_ARB>; |
| reset-names = "otp", "apb", "arb"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpu_code: cpu-code@2 { |
| reg = <0x02 0x2>; |
| }; |
| |
| otp_id: id@7 { |
| reg = <0x07 0x10>; |
| }; |
| |
| cpub0_leakage: cpu-leakage@17 { |
| reg = <0x17 0x1>; |
| }; |
| |
| cpub1_leakage: cpu-leakage@18 { |
| reg = <0x18 0x1>; |
| }; |
| |
| cpul_leakage: cpu-leakage@19 { |
| reg = <0x19 0x1>; |
| }; |
| |
| log_leakage: log-leakage@1a { |
| reg = <0x1a 0x1>; |
| }; |
| |
| gpu_leakage: gpu-leakage@1b { |
| reg = <0x1b 0x1>; |
| }; |
| |
| otp_cpu_version: cpu-version@1c { |
| reg = <0x1c 0x1>; |
| bits = <3 3>; |
| }; |
| |
| npu_leakage: npu-leakage@28 { |
| reg = <0x28 0x1>; |
| }; |
| |
| codec_leakage: codec-leakage@29 { |
| reg = <0x29 0x1>; |
| }; |
| }; |
| |
| dmac2: dma-controller@fed10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xfed10000 0x0 0x4000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>; |
| arm,pl330-periph-burst; |
| clocks = <&cru ACLK_DMAC2>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| combphy0_ps: phy@fee00000 { |
| compatible = "rockchip,rk3588-naneng-combphy"; |
| reg = <0x0 0xfee00000 0x0 0x100>; |
| clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, |
| <&cru PCLK_PHP_ROOT>; |
| clock-names = "ref", "apb", "pipe"; |
| assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; |
| assigned-clock-rates = <100000000>; |
| #phy-cells = <1>; |
| resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>; |
| reset-names = "phy", "apb"; |
| rockchip,pipe-grf = <&php_grf>; |
| rockchip,pipe-phy-grf = <&pipe_phy0_grf>; |
| status = "disabled"; |
| }; |
| |
| combphy2_psu: phy@fee20000 { |
| compatible = "rockchip,rk3588-naneng-combphy"; |
| reg = <0x0 0xfee20000 0x0 0x100>; |
| clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>, |
| <&cru PCLK_PHP_ROOT>; |
| clock-names = "ref", "apb", "pipe"; |
| assigned-clocks = <&cru CLK_REF_PIPE_PHY2>; |
| assigned-clock-rates = <100000000>; |
| #phy-cells = <1>; |
| resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>; |
| reset-names = "phy", "apb"; |
| rockchip,pipe-grf = <&php_grf>; |
| rockchip,pipe-phy-grf = <&pipe_phy2_grf>; |
| status = "disabled"; |
| }; |
| |
| system_sram2: sram@ff001000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0xff001000 0x0 0xef000>; |
| ranges = <0x0 0x0 0xff001000 0xef000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3588-pinctrl"; |
| ranges; |
| rockchip,grf = <&ioc>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| gpio0: gpio@fd8a0000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xfd8a0000 0x0 0x100>; |
| interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 0 32>; |
| interrupt-controller; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@fec20000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xfec20000 0x0 0x100>; |
| interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 32 32>; |
| interrupt-controller; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@fec30000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xfec30000 0x0 0x100>; |
| interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 64 32>; |
| interrupt-controller; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@fec40000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xfec40000 0x0 0x100>; |
| interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 96 32>; |
| interrupt-controller; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@fec50000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xfec50000 0x0 0x100>; |
| interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 128 32>; |
| interrupt-controller; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| av1d: video-codec@fdc70000 { |
| compatible = "rockchip,rk3588-av1-vpu"; |
| reg = <0x0 0xfdc70000 0x0 0x800>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vdpu"; |
| assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; |
| assigned-clock-rates = <400000000>, <400000000>; |
| clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; |
| clock-names = "aclk", "hclk"; |
| power-domains = <&power RK3588_PD_AV1>; |
| resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; |
| }; |
| }; |
| |
| #include "rk3588s-pinctrl.dtsi" |