Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 78d1880..f43e83f 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -106,7 +106,7 @@
return 0;
}
-#define GB (1 << 30)
+#define GB (1 << 30)
/* much of this code is based on (or is) the code in the pip405 port */
/* thanks go to the authors of said port - Josh */
@@ -134,86 +134,85 @@
/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo
-{
- MEMORY_TYPE memoryType;
- unsigned int numOfRowAddresses;
- unsigned int numOfColAddresses;
- unsigned int numOfModuleBanks;
- unsigned int dataWidth;
- VOLTAGE_INTERFACE voltageInterface;
- unsigned int errorCheckType; /* ECC , PARITY..*/
- unsigned int sdramWidth; /* 4,8,16 or 32 */;
- unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */
- unsigned int minClkDelay;
- unsigned int burstLengthSupported;
- unsigned int numOfBanksOnEachDevice;
- unsigned int suportedCasLatencies;
- unsigned int RefreshInterval;
- unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */
- unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns)*/
- MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
- MAX_CL_SUPPORTED_SD maxClSupported_SD;
- unsigned int moduleBankDensity;
- /* module attributes (true for yes) */
- bool bufferedAddrAndControlInputs;
- bool registeredAddrAndControlInputs;
- bool onCardPLL;
- bool bufferedDQMBinputs;
- bool registeredDQMBinputs;
- bool differentialClockInput;
- bool redundantRowAddressing;
+typedef struct _gtMemoryDimmInfo {
+ MEMORY_TYPE memoryType;
+ unsigned int numOfRowAddresses;
+ unsigned int numOfColAddresses;
+ unsigned int numOfModuleBanks;
+ unsigned int dataWidth;
+ VOLTAGE_INTERFACE voltageInterface;
+ unsigned int errorCheckType; /* ECC , PARITY.. */
+ unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
+ unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ unsigned int minClkDelay;
+ unsigned int burstLengthSupported;
+ unsigned int numOfBanksOnEachDevice;
+ unsigned int suportedCasLatencies;
+ unsigned int RefreshInterval;
+ unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */
+ unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns) */
+ MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
+ MAX_CL_SUPPORTED_SD maxClSupported_SD;
+ unsigned int moduleBankDensity;
+ /* module attributes (true for yes) */
+ bool bufferedAddrAndControlInputs;
+ bool registeredAddrAndControlInputs;
+ bool onCardPLL;
+ bool bufferedDQMBinputs;
+ bool registeredDQMBinputs;
+ bool differentialClockInput;
+ bool redundantRowAddressing;
- /* module general attributes */
- bool suportedAutoPreCharge;
- bool suportedPreChargeAll;
- bool suportedEarlyRasPreCharge;
- bool suportedWrite1ReadBurst;
- bool suported5PercentLowVCC;
- bool suported5PercentUpperVCC;
- /* module timing parameters */
- unsigned int minRasToCasDelay;
- unsigned int minRowActiveRowActiveDelay;
- unsigned int minRasPulseWidth;
- unsigned int minRowPrechargeTime; /* measured in ns */
+ /* module general attributes */
+ bool suportedAutoPreCharge;
+ bool suportedPreChargeAll;
+ bool suportedEarlyRasPreCharge;
+ bool suportedWrite1ReadBurst;
+ bool suported5PercentLowVCC;
+ bool suported5PercentUpperVCC;
+ /* module timing parameters */
+ unsigned int minRasToCasDelay;
+ unsigned int minRowActiveRowActiveDelay;
+ unsigned int minRasPulseWidth;
+ unsigned int minRowPrechargeTime; /* measured in ns */
- int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */
- int addrAndCommandSetupTime; /* (measured in ns/100) */
- int dataInputSetupTime; /* LoP left of point (measured in ns) */
- int dataInputHoldTime; /* LoP left of point (measured in ns) */
+ int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */
+ int addrAndCommandSetupTime; /* (measured in ns/100) */
+ int dataInputSetupTime; /* LoP left of point (measured in ns) */
+ int dataInputHoldTime; /* LoP left of point (measured in ns) */
/* tAC times for highest 2nd and 3rd highest CAS Latency values */
- unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns)*/
- unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns)*/
- unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns) */
+ unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns) */
+ unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */
- /* Parameters calculated from
- the extracted DIMM information */
- unsigned int size;
- unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */
- unsigned int numberOfDevices;
- uchar drb_size; /* DRAM size in n*64Mbit */
- uchar slot; /* Slot Number this module is inserted in */
- uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */
+ /* Parameters calculated from
+ the extracted DIMM information */
+ unsigned int size;
+ unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */
+ unsigned int numberOfDevices;
+ uchar drb_size; /* DRAM size in n*64Mbit */
+ uchar slot; /* Slot Number this module is inserted in */
+ uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */
#ifdef DEBUG
- uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */
- uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */
- uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */
- unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */
- unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */
- unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */
- uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */
+ uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */
+ uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */
+ uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */
+ unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */
+ unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */
+ unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */
+ uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */
#endif
} AUX_MEM_DIMM_INFO;
@@ -364,31 +363,31 @@
for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
dimmInfo->manufactura[i] = data[64 + i];
}
- printf ("\nThis RAM-Module is produced by: %s\n",
+ printf ("\nThis RAM-Module is produced by: %s\n",
dimmInfo->manufactura);
/* find Manul-ID of Dimm Module */
for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
dimmInfo->modul_id[i] = data[73 + i];
}
- printf ("The Module-ID of this RAM-Module is: %s\n",
+ printf ("The Module-ID of this RAM-Module is: %s\n",
dimmInfo->modul_id);
/* find Vendor-Data of Dimm Module */
for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
dimmInfo->vendor_data[i] = data[99 + i];
}
- printf ("Vendor Data of this RAM-Module is: %s\n",
+ printf ("Vendor Data of this RAM-Module is: %s\n",
dimmInfo->vendor_data);
/* find modul_serial_no of Dimm Module */
dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
- printf ("Serial No. of this RAM-Module is: %ld (%lx)\n",
+ printf ("Serial No. of this RAM-Module is: %ld (%lx)\n",
dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
/* find Manufac-Data of Dimm Module */
dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
- printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */
+ printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */
/* find modul_revision of Dimm Module */
dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
@@ -396,7 +395,7 @@
/* find manufac_place of Dimm Module */
dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
- printf ("manufac_place of this RAM-Module is: %d\n",
+ printf ("manufac_place of this RAM-Module is: %d\n",
dimmInfo->manufac_place);
#endif
@@ -426,11 +425,11 @@
#ifdef DEBUG
if (dimmInfo->memoryType == 0)
DP (printf
- ("Dram_type in slot %d is: SDRAM\n",
+ ("Dram_type in slot %d is: SDRAM\n",
dimmInfo->slot));
if (dimmInfo->memoryType == 1)
DP (printf
- ("Dram_type in slot %d is: DDRAM\n",
+ ("Dram_type in slot %d is: DDRAM\n",
dimmInfo->slot));
#endif
break;
@@ -439,7 +438,7 @@
case 3: /* Number Of Row Addresses */
dimmInfo->numOfRowAddresses = data[i];
DP (printf
- ("Module Number of row addresses: %d\n",
+ ("Module Number of row addresses: %d\n",
dimmInfo->numOfRowAddresses));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -447,7 +446,7 @@
case 4: /* Number Of Column Addresses */
dimmInfo->numOfColAddresses = data[i];
DP (printf
- ("Module Number of col addresses: %d\n",
+ ("Module Number of col addresses: %d\n",
dimmInfo->numOfColAddresses));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -463,7 +462,7 @@
case 6: /* Data Width */
dimmInfo->dataWidth = data[i];
DP (printf
- ("Module Data Width: %d\n",
+ ("Module Data Width: %d\n",
dimmInfo->dataWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -518,7 +517,7 @@
dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
rightOfPoint;
DP (printf
- ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
+ ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -533,7 +532,7 @@
dimmInfo->clockToDataOut_LoP = leftOfPoint;
dimmInfo->clockToDataOut_RoP = rightOfPoint;
DP (printf
- ("Clock To Data Out: %d.%2d [ns]\n",
+ ("Clock To Data Out: %d.%2d [ns]\n",
leftOfPoint, rightOfPoint));
/*dimmInfo->clockToDataOut */
break;
@@ -543,7 +542,7 @@
case 11: /* Error Check Type */
dimmInfo->errorCheckType = data[i];
DP (printf
- ("Error Check Type (0=NONE): %d\n",
+ ("Error Check Type (0=NONE): %d\n",
dimmInfo->errorCheckType));
break;
#endif
@@ -560,7 +559,7 @@
case 13: /* Sdram Width */
dimmInfo->sdramWidth = data[i];
DP (printf
- ("Sdram Width: %d\n",
+ ("Sdram Width: %d\n",
dimmInfo->sdramWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -568,7 +567,7 @@
case 14: /* Error Check Data Width */
dimmInfo->errorCheckDataWidth = data[i];
DP (printf
- ("Error Check Data Width: %d\n",
+ ("Error Check Data Width: %d\n",
dimmInfo->errorCheckDataWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -576,7 +575,7 @@
case 15: /* Minimum Clock Delay */
dimmInfo->minClkDelay = data[i];
DP (printf
- ("Minimum Clock Delay: %d\n",
+ ("Minimum Clock Delay: %d\n",
dimmInfo->minClkDelay));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -585,7 +584,7 @@
/******-******-******-*******
* bit3 | bit2 | bit1 | bit0 *
*******-******-******-*******
- burst length = * 8 | 4 | 2 | 1 *
+ burst length = * 8 | 4 | 2 | 1 *
*****************************
If for example bit0 and bit2 are set, the burst
@@ -594,7 +593,7 @@
dimmInfo->burstLengthSupported = data[i];
#ifdef DEBUG
DP (printf
- ("Burst Length Supported: "));
+ ("Burst Length Supported: "));
if (dimmInfo->burstLengthSupported & 0x01)
DP (printf ("1, "));
if (dimmInfo->burstLengthSupported & 0x02)
@@ -611,7 +610,7 @@
case 17: /* Number Of Banks On Each Device */
dimmInfo->numOfBanksOnEachDevice = data[i];
DP (printf
- ("Number Of Banks On Each Chip: %d\n",
+ ("Number Of Banks On Each Chip: %d\n",
dimmInfo->numOfBanksOnEachDevice));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -622,24 +621,24 @@
*******-******-******-******-******-******-******-*******
* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
*******-******-******-******-******-******-******-*******
- CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
*********************************************************
SDRAM:
*******-******-******-******-******-******-******-*******
* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
*******-******-******-******-******-******-******-*******
- CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
********************************************************/
dimmInfo->suportedCasLatencies = data[i];
#ifdef DEBUG
DP (printf
- ("Suported Cas Latencies: (CL) "));
+ ("Suported Cas Latencies: (CL) "));
if (dimmInfo->memoryType == 0) { /* SDRAM */
for (k = 0; k <= 7; k++) {
if (dimmInfo->
suportedCasLatencies & (1 << k))
DP (printf
- ("%d, ",
+ ("%d, ",
k + 1));
}
@@ -738,7 +737,7 @@
maxCASlatencySupported_RoP
= 0;
DP (printf
- ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+ ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
dimmInfo->
maxCASlatencySupported_LoP,
dimmInfo->
@@ -746,7 +745,7 @@
break;
case SDRAM:
/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
- dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
+ dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
DP (printf
("Max. Cas Latencies (SD): %d\n",
dimmInfo->
@@ -886,7 +885,7 @@
(" - lower VCC tolerance: 5 Percent \n"));
else
DP (printf
- (" - lower VCC tolerance: 10 Percent \n"));
+ (" - lower VCC tolerance: 10 Percent \n"));
if (dimmInfo->suported5PercentUpperVCC == 1)
DP (printf
@@ -986,7 +985,7 @@
("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n",
tmemclk, tmemclk / 100, tmemclk % 100));
DP (printf
- ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1005,7 +1004,7 @@
(dimmInfo->minRowActiveRowActiveDelay +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1024,7 +1023,7 @@
(dimmInfo->minRowActiveRowActiveDelay +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1035,7 +1034,7 @@
(NSto10PS (data[i]) +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
+ ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
dimmInfo->minRasPulseWidth, tras_clocks));
break;
@@ -1044,7 +1043,7 @@
case 31: /* Module Bank Density */
dimmInfo->moduleBankDensity = data[i];
DP (printf
- ("Module Bank Density: %d\n",
+ ("Module Bank Density: %d\n",
dimmInfo->moduleBankDensity));
#ifdef DEBUG
DP (printf
@@ -1095,7 +1094,7 @@
dimmInfo->addrAndCommandSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Address And Command Setup Time [ns]: %d.%d\n",
+ ("Address And Command Setup Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1122,7 +1121,7 @@
dimmInfo->addrAndCommandHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Address And Command Hold Time [ns]: %d.%d\n",
+ ("Address And Command Hold Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1149,7 +1148,7 @@
dimmInfo->dataInputSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Data Input Setup Time [ns]: %d.%d\n",
+ ("Data Input Setup Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1176,7 +1175,7 @@
dimmInfo->dataInputHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Data Input Hold Time [ns]: %d.%d\n\n",
+ ("Data Input Hold Time [ns]: %d.%d\n\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1212,7 +1211,7 @@
(dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
tmp *= dimmInfo->numOfModuleBanks;
tmp *= dimmInfo->sdramWidth;
- tmp = tmp >> 24; /* div by 0x4000000 (64M) */
+ tmp = tmp >> 24; /* div by 0x4000000 (64M) */
dimmInfo->drb_size = (uchar) tmp;
DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
@@ -1328,7 +1327,7 @@
DP (printf
("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
tmp_sdram_mode, tmp_dunit_control_low));
- } else { /* clk sync. bypassed */
+ } else { /* clk sync. bypassed */
tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */
@@ -1345,7 +1344,7 @@
DP (printf
("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
tmp_sdram_mode, tmp_dunit_control_low));
- } else { /* Not sync. */
+ } else { /* Not sync. */
tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */
@@ -1504,7 +1503,7 @@
/* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
{
- int l, l1;
+ int l, l1;
i = info->slot;
DP (printf
@@ -1518,31 +1517,31 @@
GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0);
GT_REG_WRITE (SDRAM_OPERATION, 0x4);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
GT_REG_WRITE (SDRAM_MODE, tmp | 0x80);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
l1 = 0;
for (l=0;l<200;l++)
- l1 += GTREGREAD (SDRAM_OPERATION);
+ l1 += GTREGREAD (SDRAM_OPERATION);
GT_REG_WRITE (SDRAM_MODE, tmp);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
/* switch back to normal operation mode */
GT_REG_WRITE (SDRAM_OPERATION, 0x5);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
@@ -1677,16 +1676,16 @@
}
/* ***************************************************************************************
-! * SDRAM INIT *
-! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
-! * This procedure fits only the Atlantis *
-! * *
+! * SDRAM INIT *
+! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
+! * This procedure fits only the Atlantis *
+! * *
! *************************************************************************************** */
/* ***************************************************************************************
-! * DFCDL initialize MV643xx Design Considerations *
-! * *
+! * DFCDL initialize MV643xx Design Considerations *
+! * *
! *************************************************************************************** */
int set_dfcdlInit (void)
{