Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c
index c84d08d..aa2e856 100644
--- a/board/snmc/qs860t/flash.c
+++ b/board/snmc/qs860t/flash.c
@@ -79,8 +79,7 @@
}
/* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1)
- {
+ if (CFG_MAX_FLASH_BANKS == 1) {
/* Setup offsets */
flash_get_offsets (FLASH_BASE1_PRELIM, &flash_info[0]);
@@ -98,15 +97,11 @@
#endif
size_b1 = 0 ;
flash_info[0].size = size_b0;
- }
- /* 2 banks */
- else
- {
+ } else { /* 2 banks */
size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM, &flash_info[1]);
/* Re-do sizing to get full correct info */
- if (size_b1)
- {
+ if (size_b1) {
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb0cr);
@@ -115,8 +110,7 @@
mtdcr(ebccfgd, pbcr);
}
- if (size_b0)
- {
+ if (size_b0) {
mtdcr(ebccfga, pb1cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb1cr);
@@ -566,17 +560,17 @@
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
- break; /* => 32 MBit */
+ break; /* => 32 MBit */
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
- break; /* => 64 MBit */
+ break; /* => 64 MBit */
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
- break; /* => 128 MBit */
+ break; /* => 128 MBit */
default:
/* FIXME*/
@@ -613,10 +607,11 @@
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr =
+ (volatile FLASH_WORD_SIZE *) (info->start[0]);
int flag, prot, sect, l_sect, barf;
ulong start, now, last;
int rcode = 0;
@@ -631,22 +626,21 @@
}
if ((info->flash_id == FLASH_UNKNOWN) ||
- ((info->flash_id > FLASH_AMD_COMP) &&
- ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ ((info->flash_id > FLASH_AMD_COMP) &&
+ ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL))) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
@@ -654,109 +648,112 @@
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
- if(info->flash_id < FLASH_AMD_COMP) {
+ flag = disable_interrupts ();
+ if (info->flash_id < FLASH_AMD_COMP) {
#ifndef CFG_FLASH_16BIT
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
#else
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x0080;
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0080;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
#endif
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
- addr[0] = (0x00300030 & FLASH_ID_MASK);
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
- while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
- (0x00800080&FLASH_ID_MASK) )
- {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
- } else {
-
-
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- barf = 0;
-#ifndef CFG_FLASH_16BIT
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00200020;
- addr[0] = 0x00D000D0;
- while(!(addr[0] & 0x00800080)); /* wait for error or finish */
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
- }
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[sect]);
+ addr[0] = (0x00300030 & FLASH_ID_MASK);
+ l_sect = sect;
}
-#else
- addr = (vu_short*)(info->start[sect]);
- addr[0] = 0x0020;
- addr[0] = 0x00D0;
- while(!(addr[0] & 0x0080)); /* wait for error or finish */
- if( addr[0] & 0x003A) /* check for error */
- barf = addr[0] & 0x003A;
-#endif
- if(barf) {
- printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if((barf & 0x0030) == 0x0030)
- printf("Command Sequence error.\n");
- if((barf & 0x0030) == 0x0020)
- printf("Block Erase error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- rcode = 1;
- } else printf(".");
- l_sect = sect;
}
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
+ while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
+ (0x00800080 & FLASH_ID_MASK)) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
+
+
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ barf = 0;
+#ifndef CFG_FLASH_16BIT
+ addr = (vu_long *) (info->start[sect]);
+ addr[0] = 0x00200020;
+ addr[0] = 0x00D000D0;
+ while (!(addr[0] & 0x00800080)); /* wait for error or finish */
+ if (addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if (barf) {
+ barf >>= 16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ }
+#else
+ addr = (vu_short *) (info->start[sect]);
+ addr[0] = 0x0020;
+ addr[0] = 0x00D0;
+ while (!(addr[0] & 0x0080)); /* wait for error or finish */
+ if (addr[0] & 0x003A) /* check for error */
+ barf = addr[0] & 0x003A;
+#endif
+ if (barf) {
+ printf ("\nFlash error in sector at %lx\n",
+ (unsigned long) addr);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if ((barf & 0x0030) == 0x0030)
+ printf ("Command Sequence error.\n");
+ if ((barf & 0x0030) == 0x0020)
+ printf ("Block Erase error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ rcode = 1;
+ } else
+ printf (".");
+ l_sect = sect;
+ }
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
+ }
}
-
- }
printf (" done\n");
return rcode;
}
@@ -1023,7 +1020,7 @@
}
}
} else {
- while(!(addr[0] & 0x00800080)) { /* wait for error or finish */
+ while(!(addr[0] & 0x00800080)) { /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (1);
}
@@ -1091,7 +1088,7 @@
} else {
/* intel stuff */
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
}
@@ -1105,7 +1102,7 @@
}
*addr = 0x00B0;
*addr = 0x0070;
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
}
*addr = 0x00FF;
@@ -1113,8 +1110,6 @@
return (0);
}
-
#endif
-/*-----------------------------------------------------------------------
- */
+/*-----------------------------------------------------------------------*/