imx: imx6sx-sdb: Enable DM QSPI driver
To support DM QSPI driver
- Add spi0 and spi1 alias for qspi1 and qspi2.
- Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string
to "spi-flash" and add "num-cs" property.
- Enable DM SPI/QSPI relavent configurations
- Remove iomux settings of qspi2 in board codes which is not needed
for DM driver.
- Add sf default settings. So running "sf probe" can detect the flash
Signed-off-by: Ye Li <ye.li@nxp.com>
diff --git a/arch/arm/dts/imx6sx-sdb-u-boot.dtsi b/arch/arm/dts/imx6sx-sdb-u-boot.dtsi
new file mode 100644
index 0000000..8e592cd
--- /dev/null
+++ b/arch/arm/dts/imx6sx-sdb-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi2 {
+ num-cs = <2>;
+
+ flash0: n25q256a@0 {
+ compatible = "spi-flash";
+ };
+
+ flash1: n25q256a@1 {
+ compatible = "spi-flash";
+ };
+};
diff --git a/arch/arm/dts/imx6sx.dtsi b/arch/arm/dts/imx6sx.dtsi
index 1a473e8..8ccf264 100644
--- a/arch/arm/dts/imx6sx.dtsi
+++ b/arch/arm/dts/imx6sx.dtsi
@@ -40,11 +40,13 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
- spi4 = &ecspi5;
+ spi0 = &qspi1;
+ spi1 = &qspi2;
+ spi2 = &ecspi1;
+ spi3 = &ecspi2;
+ spi4 = &ecspi3;
+ spi5 = &ecspi4;
+ spi6 = &ecspi5;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index d56e235..3e10c7f 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -205,33 +205,8 @@
#ifdef CONFIG_FSL_QSPI
-#define QSPI_PAD_CTRL1 \
- (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \
- PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm)
-
-static iomux_v3_cfg_t const quadspi_pads[] = {
- MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_ALE__QSPI2_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_CLE__QSPI2_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA07__QSPI2_A_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA02__QSPI2_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
- MX6_PAD_NAND_DATA05__QSPI2_B_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
-};
-
int board_qspi_init(void)
{
- /* Set the iomux */
- imx_iomux_v3_setup_multiple_pads(quadspi_pads,
- ARRAY_SIZE(quadspi_pads));
-
/* Set the clock */
enable_qspi_clk(1);
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index dcac6f4..4c235c1 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -15,6 +15,7 @@
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
+CONFIG_CMD_SF=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
@@ -37,8 +38,14 @@
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_FSL_QSPI=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PCI=y
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index dc4181d..2a7eb22 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -184,6 +184,10 @@
#define FSL_QSPI_FLASH_SIZE SZ_32M
#endif
#define FSL_QSPI_FLASH_NUM 2
+#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 40000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
#ifndef CONFIG_SPL_BUILD