kconfig: Move CONFIG_OF_LIBFDT to Kconfig
This patch follows work done by:
"Move CONFIG_OF_LIBFDT to Kconfig"
(sha1: 69e173eb57d1f4848f070c83456096ba5d2ba1b4)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Add xpress* to the patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/legoev3_defconfig b/configs/legoev3_defconfig
index d838baa..22fd057 100644
--- a/configs/legoev3_defconfig
+++ b/configs/legoev3_defconfig
@@ -10,3 +10,5 @@
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/ma5d4evk_defconfig b/configs/ma5d4evk_defconfig
index 39ce550..1448514 100644
--- a/configs/ma5d4evk_defconfig
+++ b/configs/ma5d4evk_defconfig
@@ -12,3 +12,5 @@
CONFIG_SPI_FLASH=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
index 7cfed4a..07aa874 100644
--- a/configs/stm32f746-disco_defconfig
+++ b/configs/stm32f746-disco_defconfig
@@ -7,3 +7,5 @@
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig
index 033d32b..fb2e7b2 100644
--- a/configs/xpress_defconfig
+++ b/configs/xpress_defconfig
@@ -4,3 +4,4 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ccv/xpress/imximage.cfg"
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
+CONFIG_OF_LIBFDT=y
diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig
index c2b1075..4ac7ef0 100644
--- a/configs/xpress_spl_defconfig
+++ b/configs/xpress_spl_defconfig
@@ -5,3 +5,4 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
+CONFIG_OF_LIBFDT=y
diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig
index 2977ccc..d2fa63d 100644
--- a/configs/zipitz2_defconfig
+++ b/configs/zipitz2_defconfig
@@ -1,7 +1,9 @@
CONFIG_ARM=y
CONFIG_TARGET_ZIPITZ2=y
+CONFIG_SYS_PROMPT="$ "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
-CONFIG_SYS_PROMPT="$ "
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index 79fa3c4..0bc9d2d 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -160,7 +160,6 @@
#define CONFIG_SYS_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
-#define CONFIG_OF_LIBFDT
/*
* Linux Information
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index e061a10..8a80b95 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -150,7 +150,6 @@
#define CONFIG_LOADADDR 0x20800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_OF_LIBFDT
/*
* Extra Environments
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index 78faaec..fccfb48 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -92,11 +92,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-/*
- * Handover flattened device tree (dtb file) to Linux kernel
- */
-#define CONFIG_OF_LIBFDT 1
-
/*-----------------------------------------------------------------------
* SDHC Configuration
*/
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 807ab65..e94812b 100644
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -11,7 +11,6 @@
#define CONFIG_SYS_THUMB_BUILD
/*#define CONFIG_SYS_NO_FLASH*/
-#define CONFIG_OF_LIBFDT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_FLASH_BASE 0x08000000
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index d01d88b..831b940 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -101,7 +101,6 @@
#define CONFIG_SYS_NO_FLASH
#endif
-#define CONFIG_OF_LIBFDT 1
#define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index 9bc536b..dc7a75b 100644
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -77,7 +77,6 @@
#define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */
-#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_CACHE
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 5200e02..46836d5 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -45,7 +45,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_TEXT_BASE 0x0
#define CONFIG_LZMA /* LZMA compression support */
-#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration