arc: Add support for IoT development kit
The DesignWare ARC IoT Development Kit is a versatile platform
that includes the necessary hardware and software to accelerate
software development and debugging of sensor fusion,
voice recognition and face detection designs.
More information is avaialble here [1] and here [2].
The board is based on real silicon with
ARC EM9D-based Data Fusion IP Subsystem.
It sports a rich set of I/O including
* DW USB OTG
* DW MobileStorage (used for micro SD-card)
* GPIO
* multiple serial interface including DW APB UART
* ADC, PWM and eFlash, SRAM and SPI Flash memory
* Real-Time Clock (RTC)
* Bluetooth module with worldwide regulatory compliance
(FCC, IC, CE, ETSI, TELEC)
* On-board 9-axis sensor (gyro, accelerometer and compass)
Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18
extension header.
One of the most interesting features for developers is built-in
Digilent USB JTAG probe so only micro-USB cable is needed!
[1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit
[2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
diff --git a/arch/arc/dts/Makefile b/arch/arc/dts/Makefile
index 491a4f4..17e1405 100644
--- a/arch/arc/dts/Makefile
+++ b/arch/arc/dts/Makefile
@@ -6,6 +6,7 @@
dtb-$(CONFIG_TARGET_TB100) += abilis_tb100.dtb
dtb-$(CONFIG_TARGET_EMDK) += emdk.dtb
dtb-$(CONFIG_TARGET_HSDK) += hsdk.dtb
+dtb-$(CONFIG_TARGET_IOT_DEVKIT) += iot_devkit.dtb
targets += $(dtb-y)
diff --git a/arch/arc/dts/iot_devkit.dts b/arch/arc/dts/iot_devkit.dts
new file mode 100644
index 0000000..ebf5a95
--- /dev/null
+++ b/arch/arc/dts/iot_devkit.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ console = &uart0;
+ };
+
+ cpu_card {
+ core_clk: core_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <144000000>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ uart0: serial0@80014000 {
+ compatible = "snps,dw-apb-uart";
+ clock-frequency = <16000000>;
+ reg = <0x80014000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ usb: usb@f0040000 {
+ compatible = "snps,dwc2";
+ reg = <0xf0040000 0x10000>;
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ };
+
+ usbphy: phy {
+ compatible = "nop-phy";
+ #phy-cells = <0>;
+ };
+};