sunxi: dts: Sync all dts files with upstream kernel
Bring all the sunxi dts files (and update existing ones) from
mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any
day now). This is necessary so that we can move all sunxi boards over to
the driver model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index f7cc8e7..cd05267 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -2,125 +2,69 @@
* Copyright 2014 Zoltan HERPAI
* Zoltan HERPAI <wigyori@uid0.hu>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino3";
compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
- chosen {
- stdout-path = &uart0;
+ aliases {
+ serial0 = &uart0;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- ahci_pwr_pin_a: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
- };
-
- led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-
- key_pins_pcduino3: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
@@ -161,17 +105,114 @@
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ahci_pwr_pin_a {
+ allwinner,pins = "PH2";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ key_pins_pcduino3: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_ahci_5v: ahci-5v {
- gpio = <&pio 7 2 0>;
- status = "okay";
- };
+®_ahci_5v {
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};