imx: ventana: remove phy gpio reset from dt
We configure network phy configuration for internal delay, LED config,
and clock config. If we leave the phy reset gpio defined in dt the
kernel may issue a reset to the phy and break these configs. While some
may be handled by a kernel phy driver, others may not (typically LED
config).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 7962982..1646806 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1048,6 +1048,14 @@
#endif
/*
+ * remove reset gpio control as we configure the PHY registers
+ * for internal delay, LED config, and clock config in the bootloader
+ */
+ i = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-fec");
+ if (i)
+ fdt_delprop(blob, i, "phy-reset-gpios");
+
+ /*
* Peripheral Config:
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.