Cleanup of the monahans cpu and delta board port.
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 83ae5e3..a92a450 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -821,21 +821,21 @@
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
#define RTSR __REG(0x40900008) /* RTC Status Register */
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
-#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
-#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
-#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
-#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
+#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
+#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
+#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
+#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
+#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
-#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
-#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
+#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
+#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
@@ -921,9 +921,10 @@
#ifdef CONFIG_CPU_MONAHANS
#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-/* Missing: 32 Interrupt priority registers */
-/* mk@tbd: These are the same as beneath for PXA27x: maybe can be
- * merged if GPIO Stuff is same too. */
+/* Missing: 32 Interrupt priority registers
+ * These are the same as beneath for PXA27x: maybe can be merged if
+ * GPIO Stuff is same too.
+ */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
@@ -983,24 +984,24 @@
#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
-#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
-#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
+#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
-#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
-#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
+#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
-#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
-#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
+#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
-#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
-#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
+#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3)
#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3)
@@ -1488,8 +1489,8 @@
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
-#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
+#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
/*
* Power Manager
@@ -1709,10 +1710,10 @@
#define ACCR_13MEND2 (1 << 21)
#define ACCR_PCCE (1 << 11)
-#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
-#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
-#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
-#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
@@ -1720,27 +1721,27 @@
#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
-#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
-#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
-#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
-#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
-#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
-#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
-#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
-#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
-#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
-#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
-#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
-#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
-#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
-#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
-#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
+#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
+#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */
#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */
@@ -2382,16 +2383,16 @@
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
-#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR __REG(0x40F00034)
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
-#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
+#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
+#define PSLR __REG(0x40F00034)
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
+#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
#endif /* CONFIG_PXA27X */