freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 31abee8..1363d30 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -66,13 +66,13 @@
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
#endif
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
/*
* HDR would be appended at end of image and copied to DDR along
* with U-Boot image.
*/
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 40fcd22..39f9318 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -192,7 +192,7 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#include <asm/fsl_secure_boot.h>
#endif
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 70447a2..e237012 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -74,7 +74,7 @@
#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* HDR would be appended at end of image and copied to DDR along
@@ -85,7 +85,7 @@
#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
#endif
/* NAND SPL */
@@ -100,9 +100,9 @@
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
#ifdef CONFIG_U_BOOT_HDR_SIZE
/*
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 59c43f1..cc8f4c0 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -73,7 +73,7 @@
CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* HDR would be appended at end of image and copied to DDR along
@@ -84,7 +84,7 @@
#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
#endif
#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 6f04dba..73c5629 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -235,7 +235,7 @@
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* HDR would be appended at end of image and copied to DDR along
@@ -246,7 +246,7 @@
#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 85e20617..c9c517f 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -407,7 +407,7 @@
QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
/* Initial environment variables */
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
@@ -426,7 +426,7 @@
"sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;" \
"fsl_mc start mc 0xa0a00000 0xa0e00000\0" \
"mcmemsize=0x70000000 \0"
-#else /* if !(CONFIG_SECURE_BOOT) */
+#else /* if !(CONFIG_NXP_ESBC) */
#ifdef CONFIG_TFABOOT
#define QSPI_MC_INIT_CMD \
"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
@@ -522,7 +522,7 @@
"mcmemsize=0x70000000 \0"
#endif
#endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index e2a8975..08696fa 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -352,7 +352,7 @@
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
@@ -442,7 +442,7 @@
"mcinitcmd=fsl_mc start mc 0x580a00000" \
" 0x580e00000 \0"
#endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
#ifdef CONFIG_TFABOOT
#define SD_BOOTCOMMAND \