Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_RELOC_TEXT_BASE
CONFIG_SPL_RELOC_STACK
CONFIG_SPL_RELOC_MALLOC_ADDR
CONFIG_SPL_RELOC_MALLOC_SIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/README b/README
index 360d357..7b4067f 100644
--- a/README
+++ b/README
@@ -1625,10 +1625,6 @@
CONFIG_SPL
Enable building of SPL globally.
- CONFIG_SPL_RELOC_TEXT_BASE
- Address to relocate to. If unspecified, this is equal to
- CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
-
CONFIG_SPL_BSS_START_ADDR
Link address for the BSS within the SPL binary.
@@ -1642,15 +1638,6 @@
consider that a completely unreadable NAND block is bad,
and thus should be skipped silently.
- CONFIG_SPL_RELOC_STACK
- Adress of the start of the stack SPL will use after
- relocation. If unspecified, this is equal to
- CONFIG_SYS_SPL_MALLOC_START
- Starting address of the malloc pool used in SPL.
- When this option is set the full malloc is used in SPL and
- it is set up by spl_init() and before that, the simple malloc()
- can be used if CONFIG_SYS_MALLOC_F is defined.
-
CONFIG_SYS_SPL_MALLOC_SIZE
The size of the malloc pool used in SPL.
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c
index 7eaa204..a78a914 100644
--- a/board/freescale/p1010rdb/spl.c
+++ b/board/freescale/p1010rdb/spl.c
@@ -57,7 +57,7 @@
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
- relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+ relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
@@ -73,8 +73,8 @@
arch_cpu_init();
get_clocks();
- mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
- CONFIG_SPL_RELOC_MALLOC_SIZE);
+ mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR),
+ CONFIG_VAL(RELOC_MALLOC_SIZE));
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#ifndef CONFIG_SPL_NAND_BOOT
diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c
index 22156f2..580972d 100644
--- a/board/freescale/p1_p2_rdb_pc/spl.c
+++ b/board/freescale/p1_p2_rdb_pc/spl.c
@@ -63,7 +63,7 @@
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
- relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+ relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
@@ -79,8 +79,8 @@
arch_cpu_init();
get_clocks();
- mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
- CONFIG_SPL_RELOC_MALLOC_SIZE);
+ mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR),
+ CONFIG_VAL(RELOC_MALLOC_SIZE));
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#ifdef CONFIG_SPL_ENV_SUPPORT
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 8f3985d..304fd0e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -219,8 +219,8 @@
endmenu
-menu "PowerPC SPL specific options"
- depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
+menu "PowerPC SPL / TPL specific options"
+ depends on PPC && (SPL && !SPL_FRAMEWORK)
config SPL_INIT_MINIMAL
bool "Arch init code will be built for a very small image"
@@ -231,6 +231,61 @@
config SPL_SKIP_RELOCATE
bool "Skip relocating SPL"
+config SPL_RELOC_TEXT_BASE
+ hex "Address to relocate SPL to"
+ default SPL_TEXT_BASE
+ help
+ If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no
+ relocation is done).
+
+config SPL_RELOC_STACK
+ hex "Address of the start of the stack SPL will use after relocation."
+ help
+ If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting
+ address of the malloc pool used in SPL. When this option is set the full
+ malloc is used in SPL and it is set up by spl_init() and before that, the
+ simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
+
+config SPL_RELOC_MALLOC
+ bool "SPL has malloc pool after relocation"
+
+config SPL_RELOC_MALLOC_ADDR
+ hex "Address of malloc pool in SPL"
+ depends on SPL_RELOC_MALLOC
+
+config SPL_RELOC_MALLOC_SIZE
+ hex "Size of malloc pool in SPL"
+ depends on SPL_RELOC_MALLOC
+
+config TPL_RELOC_TEXT_BASE
+ hex "Address to relocate TPL to"
+ depends on TPL
+ default TPL_TEXT_BASE
+ help
+ If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no
+ relocation is done).
+
+config TPL_RELOC_STACK
+ hex "Address of the start of the stack TPL will use after relocation."
+ depends on TPL
+ help
+ If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting
+ address of the malloc pool used in TPL. When this option is set the full
+ malloc is used in TPL and it is set up by spl_init() and before that, the
+ simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
+
+config TPL_RELOC_MALLOC
+ bool "TPL has malloc pool after relocation"
+ depends on TPL
+
+config TPL_RELOC_MALLOC_ADDR
+ hex "Address of malloc pool in TPL"
+ depends on TPL_RELOC_MALLOC
+
+config TPL_RELOC_MALLOC_SIZE
+ hex "Size of malloc pool in TPL"
+ depends on TPL_RELOC_MALLOC
+
endmenu
config HANDOFF
diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig
index f6426f0..22b4380 100644
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@@ -33,6 +33,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig
index 7040c59..53f551e 100644
--- a/configs/P1010RDB-PA_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig
@@ -22,7 +22,6 @@
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
index 57ad4b4..7406cb2 100644
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
@@ -30,6 +30,11 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
index ce5f1fd..41b2f2f 100644
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
@@ -33,6 +33,11 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index fca971b..993a1f8 100644
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -32,6 +32,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index d104669..efdf1c9 100644
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -21,7 +21,6 @@
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig
index 44d3512..058c87d 100644
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@@ -29,6 +29,11 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig
index 5e6d0c2..4c2d726 100644
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_SPIFLASH_defconfig
@@ -32,6 +32,11 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig
index 3939169..c38be8f 100644
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@@ -34,6 +34,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig
index 9692aae..146c556 100644
--- a/configs/P1010RDB-PB_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig
@@ -23,7 +23,6 @@
CONFIG_ID_EEPROM=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
index 4e5e92d..9e788ab 100644
--- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
@@ -31,6 +31,11 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
index f67961d..a762f07 100644
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
@@ -34,6 +34,11 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
index da189ce..18ba32f 100644
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@@ -33,6 +33,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig
index ca2ce61..bcf4c09 100644
--- a/configs/P1010RDB-PB_NOR_defconfig
+++ b/configs/P1010RDB-PB_NOR_defconfig
@@ -22,7 +22,6 @@
CONFIG_ID_EEPROM=y
CONFIG_SPL_MAX_SIZE=0x18000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig
index b5d097a..1d18f12 100644
--- a/configs/P1010RDB-PB_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_SDCARD_defconfig
@@ -30,6 +30,11 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig
index 62d8e77..1a36d6c 100644
--- a/configs/P1010RDB-PB_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_SPIFLASH_defconfig
@@ -33,6 +33,11 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000
+CONFIG_SPL_RELOC_STACK=0xd001c000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig
index e9a7237..54cd3d2 100644
--- a/configs/P1020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig
@@ -34,6 +34,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000
+CONFIG_SPL_RELOC_STACK=0xf8fbfff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
index 6c47be3..6a36f3b 100644
--- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
@@ -32,6 +32,10 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
index 3b2e7ce..e246a21 100644
--- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
@@ -35,6 +35,10 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig
index f3bbb60..425d668 100644
--- a/configs/P1020RDB-PC_36BIT_defconfig
+++ b/configs/P1020RDB-PC_36BIT_defconfig
@@ -24,7 +24,6 @@
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig
index cf211c7..b49cdcb 100644
--- a/configs/P1020RDB-PC_NAND_defconfig
+++ b/configs/P1020RDB-PC_NAND_defconfig
@@ -33,6 +33,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000
+CONFIG_SPL_RELOC_STACK=0xf8fbfff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig
index 55dc19d..a86a406 100644
--- a/configs/P1020RDB-PC_SDCARD_defconfig
+++ b/configs/P1020RDB-PC_SDCARD_defconfig
@@ -31,6 +31,10 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig
index c4391ed..4c9f1b4 100644
--- a/configs/P1020RDB-PC_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PC_SPIFLASH_defconfig
@@ -34,6 +34,10 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig
index 7e20aa7..3ecdd1b 100644
--- a/configs/P1020RDB-PC_defconfig
+++ b/configs/P1020RDB-PC_defconfig
@@ -23,7 +23,6 @@
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig
index c85ec6d..899d074 100644
--- a/configs/P1020RDB-PD_NAND_defconfig
+++ b/configs/P1020RDB-PD_NAND_defconfig
@@ -33,6 +33,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000
+CONFIG_SPL_RELOC_STACK=0xf8fbfff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig
index a1bbb63..ea91b9e9 100644
--- a/configs/P1020RDB-PD_SDCARD_defconfig
+++ b/configs/P1020RDB-PD_SDCARD_defconfig
@@ -31,6 +31,10 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig
index e859587..9351f00 100644
--- a/configs/P1020RDB-PD_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PD_SPIFLASH_defconfig
@@ -34,6 +34,10 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index 966b9de..d78dc0d 100644
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -23,7 +23,6 @@
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig
index eefc72e..ad6c72c 100644
--- a/configs/P2020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig
@@ -34,6 +34,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000
+CONFIG_SPL_RELOC_STACK=0xf8fffff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
index 5ac2f8c..d4f82f1 100644
--- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
@@ -32,6 +32,10 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
index 6150b84..7a198e0 100644
--- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
@@ -35,6 +35,10 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig
index fc22e62..258442b 100644
--- a/configs/P2020RDB-PC_36BIT_defconfig
+++ b/configs/P2020RDB-PC_36BIT_defconfig
@@ -24,7 +24,6 @@
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig
index dc94e25..f5bd701 100644
--- a/configs/P2020RDB-PC_NAND_defconfig
+++ b/configs/P2020RDB-PC_NAND_defconfig
@@ -33,6 +33,13 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_INIT_MINIMAL=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000
+CONFIG_SPL_RELOC_STACK=0xf8fffff0
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_MAX_SIZE=0x20000
diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig
index 4f33a69..0e1eb82 100644
--- a/configs/P2020RDB-PC_SDCARD_defconfig
+++ b/configs/P2020RDB-PC_SDCARD_defconfig
@@ -31,6 +31,10 @@
CONFIG_SPL_MMC_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig
index e63cd16..5ffda90 100644
--- a/configs/P2020RDB-PC_SPIFLASH_defconfig
+++ b/configs/P2020RDB-PC_SPIFLASH_defconfig
@@ -34,6 +34,10 @@
CONFIG_SPL_SPI_BOOT=y
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig
index dd316f5..fb1a239 100644
--- a/configs/P2020RDB-PC_defconfig
+++ b/configs/P2020RDB-PC_defconfig
@@ -23,7 +23,6 @@
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
-CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig
index ae8828d..93dc0c1 100644
--- a/configs/T1024RDB_NAND_defconfig
+++ b/configs/T1024RDB_NAND_defconfig
@@ -39,6 +39,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig
index 8ac0e4a..dddf742 100644
--- a/configs/T1024RDB_SDCARD_defconfig
+++ b/configs/T1024RDB_SDCARD_defconfig
@@ -40,6 +40,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig
index ebe814f..d8e4124 100644
--- a/configs/T1024RDB_SPIFLASH_defconfig
+++ b/configs/T1024RDB_SPIFLASH_defconfig
@@ -43,6 +43,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig
index e12bb9f..ccb1a33 100644
--- a/configs/T1042D4RDB_NAND_defconfig
+++ b/configs/T1042D4RDB_NAND_defconfig
@@ -35,6 +35,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
index 01a6e97..4b3962c 100644
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ b/configs/T1042D4RDB_SDCARD_defconfig
@@ -36,6 +36,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig
index ce334b1..a9668c5 100644
--- a/configs/T1042D4RDB_SPIFLASH_defconfig
+++ b/configs/T1042D4RDB_SPIFLASH_defconfig
@@ -39,6 +39,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index 67f84d2..e8b83ed 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -40,6 +40,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index 5cfdb56..1e9b586 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -41,6 +41,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index 99889cf..2967c4e 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -44,6 +44,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 0046bd3..dd5a3de 100644
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -38,6 +38,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig
index 0d09be3..2c35b80 100644
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@@ -39,6 +39,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig
index 5cbfc55..21e0be3 100644
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@@ -42,6 +42,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
index bc307fa..d2b8df2 100644
--- a/configs/T2080RDB_revD_NAND_defconfig
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -39,6 +39,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
index e0456de..24dea1a 100644
--- a/configs/T2080RDB_revD_SDCARD_defconfig
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -40,6 +40,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
index 4bef18e..a5c397d 100644
--- a/configs/T2080RDB_revD_SPIFLASH_defconfig
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -43,6 +43,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig
index f68d98c..56eb03b 100644
--- a/configs/T4240RDB_SDCARD_defconfig
+++ b/configs/T4240RDB_SDCARD_defconfig
@@ -37,6 +37,10 @@
CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
CONFIG_SPL_FLUSH_IMAGE=y
CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index ead5355..13f8360 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -43,8 +43,6 @@
#ifdef CONFIG_NXP_ESBC
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
-#define CONFIG_SPL_RELOC_STACK 0x00100000
#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
@@ -392,10 +390,6 @@
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_L2_SIZE (256 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
#elif defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
@@ -403,18 +397,12 @@
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_L2_SIZE (256 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
#else
#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_L2_SIZE (256 << 10)
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000)
-#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
#endif
#endif
#endif
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 5b0cea7..4dcd376 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -121,9 +121,6 @@
#define CONFIG_SYS_L3_SIZE (256 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR 0xf0000000
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 29b4cc4..07eed3b 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -108,9 +108,6 @@
#define CONFIG_SYS_L3_SIZE 256 << 10
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 22cee32..16751e5 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -94,9 +94,6 @@
#define CONFIG_SYS_L3_SIZE (512 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index fafd834..feec2c3 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -89,9 +89,6 @@
#define CONFIG_SYS_L3_SIZE (512 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 4b5c6bc..2185413 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -69,9 +69,6 @@
#define CONFIG_SYS_L3_SIZE (512 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 849a0b8..0b866f4 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -336,31 +336,17 @@
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
-#if defined(CONFIG_TARGET_P2020RDB)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10)
-#else
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10)
-#endif
#elif defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
#else
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000)
-#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
#endif /* CONFIG_TPL_BUILD */
#endif
#endif