ARM: AM57xx: AM43xx: Fix USB host
CONFIG_USB_XHCI_OMAP can be set for host mode without setting
CONFIG_USB_DWC3 which is meant for gadget mode only.
board_usb_init() was not being defined for CONFIG_USB_XHCI_OMAP
resulting in a data abort on usb start.
Define board_usb_init() for CONFIG_USB_XHCI_OMAP case. Move
gadget specific handling to within CONFIG_USB_DWC3.
Fixes: 6f1af1e358b7 ("board: ti: invoke clock API to enable and disable clocks")
Signed-off-by: Roger Quadros <rogerq@ti.com>
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 9904047..7142a92 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -439,64 +439,6 @@
.index = 1,
};
-int board_usb_init(int index, enum usb_init_type init)
-{
- enable_usb_clocks(index);
- switch (index) {
- case 0:
- if (init == USB_INIT_DEVICE) {
- printf("port %d can't be used as device\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- } else {
- usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
- usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
- setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
- OTG_SS_CLKCTRL_MODULEMODE_HW |
- OPTFCLKEN_REFCLK960M);
- }
-
- ti_usb_phy_uboot_init(&usb_phy1_device);
- dwc3_omap_uboot_init(&usb_otg_ss1_glue);
- dwc3_uboot_init(&usb_otg_ss1);
- break;
- case 1:
- if (init == USB_INIT_DEVICE) {
- usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- } else {
- printf("port %d can't be used as host\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
-
- ti_usb_phy_uboot_init(&usb_phy2_device);
- dwc3_omap_uboot_init(&usb_otg_ss2_glue);
- dwc3_uboot_init(&usb_otg_ss2);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- switch (index) {
- case 0:
- case 1:
- ti_usb_phy_uboot_exit(index);
- dwc3_uboot_exit(index);
- dwc3_omap_uboot_exit(index);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
- disable_usb_clocks(index);
- return 0;
-}
-
int usb_gadget_handle_interrupts(int index)
{
u32 status;
@@ -507,7 +449,63 @@
return 0;
}
+#endif /* CONFIG_USB_DWC3 */
+
+#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
+int board_usb_init(int index, enum usb_init_type init)
+{
+ enable_usb_clocks(index);
+ switch (index) {
+ case 0:
+ if (init == USB_INIT_DEVICE) {
+ printf("port %d can't be used as device\n", index);
+ disable_usb_clocks(index);
+ return -EINVAL;
+ }
+ break;
+ case 1:
+ if (init == USB_INIT_DEVICE) {
+#ifdef CONFIG_USB_DWC3
+ usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
+ usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+ ti_usb_phy_uboot_init(&usb_phy2_device);
+ dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+ dwc3_uboot_init(&usb_otg_ss2);
#endif
+ } else {
+ printf("port %d can't be used as host\n", index);
+ disable_usb_clocks(index);
+ return -EINVAL;
+ }
+
+ break;
+ default:
+ printf("Invalid Controller Index\n");
+ }
+
+ return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+#ifdef CONFIG_USB_DWC3
+ switch (index) {
+ case 0:
+ case 1:
+ if (init == USB_INIT_DEVICE) {
+ ti_usb_phy_uboot_exit(index);
+ dwc3_uboot_exit(index);
+ dwc3_omap_uboot_exit(index);
+ }
+ break;
+ default:
+ printf("Invalid Controller Index\n");
+ }
+#endif
+ disable_usb_clocks(index);
+ return 0;
+}
+#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
#ifdef CONFIG_DRIVER_TI_CPSW