blob: db7b67373101636b61034b3fc90d2b147a33219a [file] [log] [blame]
/*
* (C) Copyright 2009 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK)
#define CON_MASK(x) (0xf << ((x) << 2))
#define CON_SFR(x, v) ((v) << ((x) << 2))
#define DAT_MASK(x) (0x1 << (x))
#define DAT_SET(x) (0x1 << (x))
#define PULL_MASK(x) (0x3 << ((x) << 1))
#define PULL_MODE(x, v) ((v) << ((x) << 1))
#define DRV_MASK(x) (0x3 << ((x) << 1))
#define DRV_SET(x, m) ((m) << ((x) << 1))
#define RATE_MASK(x) (0x1 << (x + 16))
#define RATE_SET(x) (0x1 << (x + 16))
#define name_to_gpio(n) s5p_name_to_gpio(n)
static inline int s5p_name_to_gpio(const char *name)
{
unsigned num, irregular_set_number, irregular_bank_base;
const struct gpio_name_num_table *tabp;
char this_bank, bank_name, irregular_bank_name;
char *endp;
/*
* The gpio name starts with either 'g' or 'gp' followed by the bank
* name character. Skip one or two characters depending on the prefix.
*/
if (name[0] == 'g' && name[1] == 'p')
name += 2;
else if (name[0] == 'g')
name++;
else
return -1; /* Name must start with 'g' */
bank_name = *name++;
if (!*name)
return -1; /* At least one digit is required/expected. */
/*
* On both exynos5 and exynos5420 architectures there is a bank of
* GPIOs which does not fall into the regular address pattern. Those
* banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below
* assignments help to handle these irregularities.
*/
#if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5)
if (cpu_is_exynos5()) {
if (proid_is_exynos5420()) {
tabp = exynos5420_gpio_table;
irregular_bank_name = 'y';
irregular_set_number = '7';
irregular_bank_base = EXYNOS5420_GPIO_Y70;
} else {
tabp = exynos5_gpio_table;
irregular_bank_name = 'c';
irregular_set_number = '4';
irregular_bank_base = EXYNOS5_GPIO_C40;
}
} else {
if (proid_is_exynos4412())
tabp = exynos4x12_gpio_table;
else
tabp = exynos4_gpio_table;
irregular_bank_name = 0;
irregular_set_number = 0;
irregular_bank_base = 0;
}
#else
if (cpu_is_s5pc110())
tabp = s5pc110_gpio_table;
else
tabp = s5pc100_gpio_table;
irregular_bank_name = 0;
irregular_set_number = 0;
irregular_bank_base = 0;
#endif
this_bank = tabp->bank;
do {
if (bank_name == this_bank) {
unsigned pin_index; /* pin number within the bank */
if ((bank_name == irregular_bank_name) &&
(name[0] == irregular_set_number)) {
pin_index = name[1] - '0';
/* Irregular sets have 8 pins. */
if (pin_index >= GPIO_PER_BANK)
return -1;
num = irregular_bank_base + pin_index;
} else {
pin_index = simple_strtoul(name, &endp, 8);
pin_index -= tabp->bank_offset;
/*
* Sanity check: bunk 'z' has no set number,
* for all other banks there must be exactly
* two octal digits, and the resulting number
* should not exceed the number of pins in the
* bank.
*/
if (((bank_name != 'z') && !name[1]) ||
*endp ||
(pin_index >= tabp->bank_size))
return -1;
num = tabp->base + pin_index;
}
return num;
}
this_bank = (++tabp)->bank;
} while (this_bank);
return -1;
}
static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
{
unsigned int value;
value = readl(&bank->con);
value &= ~CON_MASK(gpio);
value |= CON_SFR(gpio, cfg);
writel(value, &bank->con);
}
static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
value = readl(&bank->dat);
value &= ~DAT_MASK(gpio);
if (en)
value |= DAT_SET(gpio);
writel(value, &bank->dat);
}
static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank,
int gpio, int en)
{
s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT);
s5p_gpio_set_value(bank, gpio, en);
}
static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
{
s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT);
}
static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
{
unsigned int value;
value = readl(&bank->dat);
return !!(value & DAT_MASK(gpio));
}
static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
value = readl(&bank->pull);
value &= ~PULL_MASK(gpio);
switch (mode) {
case S5P_GPIO_PULL_DOWN:
case S5P_GPIO_PULL_UP:
value |= PULL_MODE(gpio, mode);
break;
default:
break;
}
writel(value, &bank->pull);
}
static void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
value = readl(&bank->drv);
value &= ~DRV_MASK(gpio);
switch (mode) {
case S5P_GPIO_DRV_1X:
case S5P_GPIO_DRV_2X:
case S5P_GPIO_DRV_3X:
case S5P_GPIO_DRV_4X:
value |= DRV_SET(gpio, mode);
break;
default:
return;
}
writel(value, &bank->drv);
}
static void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
value = readl(&bank->drv);
value &= ~RATE_MASK(gpio);
switch (mode) {
case S5P_GPIO_DRV_FAST:
case S5P_GPIO_DRV_SLOW:
value |= RATE_SET(gpio);
break;
default:
return;
}
writel(value, &bank->drv);
}
struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio)
{
const struct gpio_info *data;
unsigned int upto;
int i, count;
data = get_gpio_data();
count = get_bank_num();
upto = 0;
for (i = 0; i < count; i++) {
debug("i=%d, upto=%d\n", i, upto);
if (gpio < data->max_gpio) {
struct s5p_gpio_bank *bank;
bank = (struct s5p_gpio_bank *)data->reg_addr;
bank += (gpio - upto) / GPIO_PER_BANK;
debug("gpio=%d, bank=%p\n", gpio, bank);
return bank;
}
upto = data->max_gpio;
data++;
}
return NULL;
}
int s5p_gpio_get_pin(unsigned gpio)
{
return S5P_GPIO_GET_PIN(gpio);
}
/* Common GPIO API */
int gpio_request(unsigned gpio, const char *label)
{
return 0;
}
int gpio_free(unsigned gpio)
{
return 0;
}
int gpio_direction_input(unsigned gpio)
{
s5p_gpio_direction_input(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio));
return 0;
}
int gpio_direction_output(unsigned gpio, int value)
{
s5p_gpio_direction_output(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), value);
return 0;
}
int gpio_get_value(unsigned gpio)
{
return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio));
}
int gpio_set_value(unsigned gpio, int value)
{
s5p_gpio_set_value(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), value);
return 0;
}
void gpio_set_pull(int gpio, int mode)
{
s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), mode);
}
void gpio_set_drv(int gpio, int mode)
{
s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), mode);
}
void gpio_cfg_pin(int gpio, int cfg)
{
s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), cfg);
}
void gpio_set_rate(int gpio, int mode)
{
s5p_gpio_set_rate(s5p_gpio_get_bank(gpio),
s5p_gpio_get_pin(gpio), mode);
}