drivers/ddr/fsl: Add calculation of register control words
DDR4 RDIMM has some information in SPD to be used to calculate the
control words for register chip. The rest can be found from JEDEC
spec DDR4RCD02.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index bcab904..8b87271 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -724,10 +724,14 @@
}
/* DDR SDRAM Register Control Word */
-static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
+static void set_ddr_sdram_rcw(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
{
+ unsigned int ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+ unsigned int rc0a, rc0f;
+
if (common_dimm->all_dimms_registered &&
!common_dimm->all_dimms_unbuffered) {
if (popts->rcw_override) {
@@ -735,6 +739,16 @@
ddr->ddr_sdram_rcw_2 = popts->rcw_2;
ddr->ddr_sdram_rcw_3 = popts->rcw_3;
} else {
+ rc0a = ddr_freq > 3200 ? 0x7 :
+ (ddr_freq > 2933 ? 0x6 :
+ (ddr_freq > 2666 ? 0x5 :
+ (ddr_freq > 2400 ? 0x4 :
+ (ddr_freq > 2133 ? 0x3 :
+ (ddr_freq > 1866 ? 0x2 :
+ (ddr_freq > 1600 ? 1 : 0))))));
+ rc0f = ddr_freq > 3200 ? 0x3 :
+ (ddr_freq > 2400 ? 0x2 :
+ (ddr_freq > 2133 ? 0x1 : 0));
ddr->ddr_sdram_rcw_1 =
common_dimm->rcw[0] << 28 | \
common_dimm->rcw[1] << 24 | \
@@ -747,12 +761,14 @@
ddr->ddr_sdram_rcw_2 =
common_dimm->rcw[8] << 28 | \
common_dimm->rcw[9] << 24 | \
- common_dimm->rcw[10] << 20 | \
+ rc0a << 20 | \
common_dimm->rcw[11] << 16 | \
common_dimm->rcw[12] << 12 | \
common_dimm->rcw[13] << 8 | \
common_dimm->rcw[14] << 4 | \
- common_dimm->rcw[15];
+ rc0f;
+ ddr->ddr_sdram_rcw_3 =
+ ((ddr_freq - 1260 + 19) / 20) << 8;
}
debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n",
ddr->ddr_sdram_rcw_1);
@@ -2561,6 +2577,8 @@
set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en);
set_ddr_sdram_mode_10(ctrl_num, ddr, popts, common_dimm, unq_mrs_en);
#endif
+ set_ddr_sdram_rcw(ctrl_num, ddr, popts, common_dimm);
+
set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm);
set_ddr_data_init(ddr);
set_ddr_sdram_clk_cntl(ddr, popts);
@@ -2582,8 +2600,6 @@
set_ddr_sr_cntr(ddr, sr_it);
- set_ddr_sdram_rcw(ddr, popts, common_dimm);
-
#ifdef CONFIG_SYS_FSL_DDR_EMU
/* disble DDR training for emulator */
ddr->debug[2] = 0x00000400;