board: armltd: Add support for Total Compute platform
Total Compute is based on ARM architecture and has
the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB
Signed-off-by: Usama Arif <usama.arif@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h
new file mode 100644
index 0000000..cc93f19
--- /dev/null
+++ b/include/configs/total_compute.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Total Compute platform. Parts were derived from other ARM
+ * configurations.
+ * (C) Copyright 2020 Arm Limited
+ * Usama Arif <usama.arif@arm.com>
+ */
+
+#ifndef __TOTAL_COMPUTE_H
+#define __TOTAL_COMPUTE_H
+
+#define CONFIG_REMAKE_ELF
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20)
+
+#define UART0_BASE 0x7ff80000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_CLOCK 7372800
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR 0x90000000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1 0x80000000
+/* Top 48MB reserved for secure world use */
+#define DRAM_SEC_SIZE 0x03000000
+#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_ARM_PL180_MMCI_BASE 0x001c050000
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 12000000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x20000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x80080000\0" \
+ "initrd_addr_r=0x88000000\0" \
+ "fdt_addr_r=0x83000000\0"
+/*
+ * If vbmeta partition is present, boot Android with verification using AVB.
+ * Else if system partition is present (no vbmeta partition), boot Android
+ * without verification (for development purposes).
+ * Else boot FIT image.
+ */
+#define CONFIG_BOOTCOMMAND \
+ "if part number mmc 0 vbmeta is_avb; then" \
+ " echo MMC with vbmeta partition detected.;" \
+ " echo starting Android Verified boot.;" \
+ " avb init 0; " \
+ " if avb verify; then " \
+ " set bootargs $bootargs $avb_bootargs; " \
+ " part start mmc 0 boot boot_start; " \
+ " part size mmc 0 boot boot_size; " \
+ " mmc read ${load_addr} ${boot_start} ${boot_size}; " \
+ " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \
+ " else; " \
+ " echo AVB verification failed.; " \
+ " exit; " \
+ " fi; " \
+ "elif part number mmc 0 system is_non_avb_android; then " \
+ " booti ${kernel_addr_r} ${initrd_addr_r} ${fdt_addr_r};" \
+ "else;" \
+ " echo Booting FIT image.;" \
+ " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \
+ "fi;"
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#define CONFIG_SYS_FLASH_BASE 0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000
+
+#endif /* __TOTAL_COMPUTE_H */