SPEAr : Support added for SPEAr600 board
SPEAr600 SoC support contains basic spear600 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
Signed-off-by: Vipin <vipin.kumar@st.com>
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
new file mode 100755
index 0000000..dfa3ece
--- /dev/null
+++ b/board/spear/common/spr_misc.c
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_xloader_table.h>
+#include <asm/arch/spr_defs.h>
+
+#define CPU 0
+#define DDR 1
+#define SRAM_REL 0xD2801000
+
+DECLARE_GLOBAL_DATA_PTR;
+static struct chip_data chip_data;
+
+int dram_init(void)
+{
+ struct xloader_table *xloader_tb =
+ (struct xloader_table *)XLOADER_TABLE_ADDRESS;
+ struct xloader_table_1_1 *table_1_1;
+ struct xloader_table_1_2 *table_1_2;
+ struct chip_data *chip = &chip_data;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
+ PHYS_SDRAM_1_MAXSIZE);
+
+ if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
+ table_1_1 = &xloader_tb->table.table_1_1;
+ chip->dramfreq = table_1_1->ddrfreq;
+ chip->dramtype = table_1_1->ddrtype;
+
+ } else if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
+ table_1_2 = &xloader_tb->table.table_1_2;
+ chip->dramfreq = table_1_2->ddrfreq;
+ chip->dramtype = table_1_2->ddrtype;
+ } else {
+ chip->dramfreq = -1;
+ }
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ setenv("verify", "n");
+
+#if defined(CONFIG_SPEAR_USBTTY)
+ setenv("stdin", "usbtty");
+ setenv("stdout", "usbtty");
+ setenv("stderr", "usbtty");
+#endif
+ return 0;
+}
+
+int spear_board_init(ulong mach_type)
+{
+ struct xloader_table *xloader_tb =
+ (struct xloader_table *)XLOADER_TABLE_ADDRESS;
+ struct xloader_table_1_2 *table_1_2;
+ struct chip_data *chip = &chip_data;
+
+ gd->bd->bi_arch_number = mach_type;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
+
+ /* CPU is initialized to work at 333MHz in Xloader */
+ chip->cpufreq = 333;
+
+ if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
+ table_1_2 = &xloader_tb->table.table_1_2;
+ memcpy(chip->version, table_1_2->version,
+ sizeof(chip->version));
+ }
+
+ return 0;
+}
+
+int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ void (*sram_setfreq) (unsigned int, unsigned int);
+ struct chip_data *chip = &chip_data;
+ unsigned char mac[6];
+ unsigned int frequency;
+
+ if ((argc > 3) || (argc < 2)) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
+
+ frequency = simple_strtoul(argv[2], NULL, 0);
+
+ if (frequency > 333) {
+ printf("Frequency is limited to 333MHz\n");
+ return 1;
+ }
+
+ sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
+
+ if (!strcmp(argv[1], "cpufreq")) {
+ sram_setfreq(CPU, frequency);
+ printf("CPU frequency changed to %u\n", frequency);
+
+ chip->cpufreq = frequency;
+ } else {
+ sram_setfreq(DDR, frequency);
+ printf("DDR frequency changed to %u\n", frequency);
+
+ chip->dramfreq = frequency;
+ }
+
+ return 0;
+ } else if (!strcmp(argv[1], "print")) {
+
+ if (chip->cpufreq == -1)
+ printf("CPU Freq = Not Known\n");
+ else
+ printf("CPU Freq = %d MHz\n", chip->cpufreq);
+
+ if (chip->dramfreq == -1)
+ printf("DDR Freq = Not Known\n");
+ else
+ printf("DDR Freq = %d MHz\n", chip->dramfreq);
+
+ if (chip->dramtype == DDRMOBILE)
+ printf("DDR Type = MOBILE\n");
+ else if (chip->dramtype == DDR2)
+ printf("DDR Type = DDR2\n");
+ else
+ printf("DDR Type = Not Known\n");
+
+ printf("Xloader Rev = %s\n", chip->version);
+
+ return 0;
+ }
+
+ cmd_usage(cmdtp);
+ return 1;
+}
+
+U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
+ "configure chip",
+ "chip_config cpufreq/ddrfreq frequency\n"
+ "chip_config print");