sysreset: psci: support system reset in a generic way with PSCI
If the system is running PSCI firmware, the System Reset function
(func ID: 0x80000009) is supposed to be handled by PSCI, that is,
the SoC/board specific reset implementation should be moved to PSCI.
U-Boot should call the PSCI service according to the arm-smccc
manner.
The arm-smccc is supported on ARMv7 or later. Especially, ARMv8
generation SoCs are likely to run ARM Trusted Firmware BL31. In
this case, U-Boot is a non-secure world boot loader, so it should
not be able to reset the system directly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 3e6bbac..a096dad 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -24,6 +24,8 @@
source "drivers/dma/Kconfig"
+source "drivers/firmware/Kconfig"
+
source "drivers/fpga/Kconfig"
source "drivers/gpio/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 5d8baa5..4a4b237 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -23,7 +23,7 @@
obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
-obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
@@ -52,7 +52,7 @@
ifdef CONFIG_TPL_BUILD
obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
-obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
+obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
@@ -71,6 +71,7 @@
obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
obj-$(CONFIG_CPU) += cpu/
obj-y += crypto/
+obj-y += firmware/
obj-$(CONFIG_FPGA) += fpga/
obj-y += hwmon/
obj-y += misc/
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 0000000..4c32426
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,6 @@
+config FIRMWARE
+ bool
+
+config ARM_PSCI_FW
+ bool
+ select FIRMWARE
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
new file mode 100644
index 0000000..b208255
--- /dev/null
+++ b/drivers/firmware/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_FIRMWARE) += firmware-uclass.o
+obj-$(CONFIG_ARM_PSCI_FW) += psci.o
diff --git a/drivers/firmware/firmware-uclass.c b/drivers/firmware/firmware-uclass.c
new file mode 100644
index 0000000..01b6a44
--- /dev/null
+++ b/drivers/firmware/firmware-uclass.c
@@ -0,0 +1,11 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/uclass.h>
+
+/* Firmware access is platform-dependent. No generic code in uclass */
+UCLASS_DRIVER(firmware) = {
+ .id = UCLASS_FIRMWARE,
+ .name = "firmware",
+};
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
new file mode 100644
index 0000000..40fba64
--- /dev/null
+++ b/drivers/firmware/psci.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2017 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * Based on drivers/firmware/psci.c from Linux:
+ * Copyright (C) 2015 ARM Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm/device.h>
+#include <dm/lists.h>
+#include <libfdt.h>
+#include <linux/arm-smccc.h>
+#include <linux/errno.h>
+#include <linux/psci.h>
+
+psci_fn *invoke_psci_fn;
+
+static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
+ unsigned long arg0, unsigned long arg1,
+ unsigned long arg2)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_hvc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+ return res.a0;
+}
+
+static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
+ unsigned long arg0, unsigned long arg1,
+ unsigned long arg2)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+ return res.a0;
+}
+
+static int psci_bind(struct udevice *dev)
+{
+ /* No SYSTEM_RESET support for PSCI 0.1 */
+ if (of_device_is_compatible(dev, "arm,psci-0.2") ||
+ of_device_is_compatible(dev, "arm,psci-1.0")) {
+ int ret;
+
+ /* bind psci-sysreset optionally */
+ ret = device_bind_driver(dev, "psci-sysreset", "psci-sysreset",
+ NULL);
+ if (ret)
+ debug("PSCI System Reset was not bound.\n");
+ }
+
+ return 0;
+}
+
+static int psci_probe(struct udevice *dev)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ const char *method;
+
+ method = fdt_stringlist_get(gd->fdt_blob, dev->of_offset, "method", 0,
+ NULL);
+ if (!method) {
+ printf("missing \"method\" property\n");
+ return -ENXIO;
+ }
+
+ if (!strcmp("hvc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_hvc;
+ } else if (!strcmp("smc", method)) {
+ invoke_psci_fn = __invoke_psci_fn_smc;
+ } else {
+ printf("invalid \"method\" property: %s\n", method);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id psci_of_match[] = {
+ { .compatible = "arm,psci" },
+ { .compatible = "arm,psci-0.2" },
+ { .compatible = "arm,psci-1.0" },
+ {},
+};
+
+U_BOOT_DRIVER(psci) = {
+ .name = "psci",
+ .id = UCLASS_FIRMWARE,
+ .of_match = psci_of_match,
+ .bind = psci_bind,
+ .probe = psci_probe,
+};
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 05a37b9..9664630 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -13,4 +13,14 @@
to effect a reset. The uclass will try all available drivers when
reset_walk() is called.
+if SYSRESET
+
+config SYSRESET_PSCI
+ bool "Enable support for PSCI System Reset"
+ depends on ARM_PSCI_FW
+ help
+ Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware
+ must be running on your system.
+
+endif
endmenu
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 49b8bb6..7bb8406 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -5,6 +5,7 @@
#
obj-$(CONFIG_SYSRESET) += sysreset-uclass.o
+obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ROCKCHIP_RK3036) += sysreset_rk3036.o
diff --git a/drivers/sysreset/sysreset_psci.c b/drivers/sysreset/sysreset_psci.c
new file mode 100644
index 0000000..a4911b7
--- /dev/null
+++ b/drivers/sysreset/sysreset_psci.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <sysreset.h>
+#include <linux/errno.h>
+#include <linux/psci.h>
+
+static int psci_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+ unsigned long function_id;
+
+ switch (type) {
+ case SYSRESET_WARM:
+ case SYSRESET_COLD:
+ function_id = PSCI_0_2_FN_SYSTEM_RESET;
+ break;
+ case SYSRESET_POWER:
+ function_id = PSCI_0_2_FN_SYSTEM_OFF;
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ invoke_psci_fn(function_id, 0, 0, 0);
+
+ return -EINPROGRESS;
+}
+
+static struct sysreset_ops psci_sysreset_ops = {
+ .request = psci_sysreset_request,
+};
+
+U_BOOT_DRIVER(psci_sysreset) = {
+ .name = "psci-sysreset",
+ .id = UCLASS_SYSRESET,
+ .ops = &psci_sysreset_ops,
+};