Merge git://git.denx.de/u-boot-dm
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index e70bed4..da45d98 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -54,8 +54,10 @@
orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */
msr scr_el3, x0
msr cptr_el3, xzr /* Enable FP/SIMD */
+#ifdef COUNTER_FREQUENCY
ldr x0, =COUNTER_FREQUENCY
msr cntfrq_el0, x0 /* Initialize CNTFRQ */
+#endif
b 0f
2: msr vbar_el2, x0
mov x0, #0x33ff
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0a8c88d..5afe8a9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -39,6 +39,7 @@
tegra124-venice2.dtb \
tegra210-e2220-1170.dtb \
tegra210-p2371-0000.dtb \
+ tegra210-p2371-2180.dtb \
tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-ld4-ref.dtb \
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index b8c8a92..e68d7be 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -320,6 +320,63 @@
clocks = <&tegra_car 47>, <&tegra_car 124>;
};
+ spi@7000d400 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d400 0x200>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+ resets = <&tegra_car 41>;
+ reset-names = "spi";
+ dmas = <&apbdma 15>, <&apbdma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d600 0x200>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d800 0x200>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+ resets = <&tegra_car 46>;
+ reset-names = "spi";
+ dmas = <&apbdma 17>, <&apbdma 17>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000da00 0x200>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+ resets = <&tegra_car 68>;
+ reset-names = "spi";
+ dmas = <&apbdma 18>, <&apbdma 18>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+
kbc@7000e200 {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x0078>;
diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts
new file mode 100644
index 0000000..5d9adcf
--- /dev/null
+++ b/arch/arm/dts/tegra210-p2371-2180.dts
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+ model = "NVIDIA P2371-2180";
+ compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = "/i2c@0,7000d000";
+ sdhci0 = "/sdhci@0,700b0600";
+ sdhci1 = "/sdhci@0,700b0000";
+ usb0 = "/usb@0,7d000000";
+ };
+
+ memory {
+ reg = <0x0 0x80000000 0x0 0xc0000000>;
+ };
+
+ sdhci@0,700b0000 {
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ };
+
+ sdhci@0,700b0600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ i2c@0,7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ usb@0,7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index d570d7f..e56031d 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -44,6 +44,9 @@
/* return the current oscillator clock frequency */
enum clock_osc_freq clock_get_osc_freq(void);
+/* return the clk_m frequency */
+unsigned int clk_m_get_rate(unsigned int parent_rate);
+
/**
* Start PLL using the provided configuration parameters.
*
@@ -338,8 +341,8 @@
void tegra30_set_up_pllp(void);
-/* Number of PLL-based clocks (i.e. not OSC or 32KHz) */
-#define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 2)
+/* Number of PLL-based clocks (i.e. not OSC, MCLK or 32KHz) */
+#define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 3)
struct clk_pll_info {
u32 m_shift:5; /* DIVM_SHIFT */
diff --git a/arch/arm/include/asm/arch-tegra/gpio.h b/arch/arm/include/asm/arch-tegra/gpio.h
index 7334e0c..daf5698 100644
--- a/arch/arm/include/asm/arch-tegra/gpio.h
+++ b/arch/arm/include/asm/arch-tegra/gpio.h
@@ -28,15 +28,6 @@
};
/**
- * tegra_spl_gpio_direction_output() - set the output value of a GPIO
- *
- * This function is only used from SPL on seaboard, which needs to enable a
- * GPIO to get the UART running. It could be done in U-Boot rather than SPL,
- * but for now, this gets it working
- */
-int tegra_spl_gpio_direction_output(int gpio, int value);
-
-/**
* Configure a list of GPIOs
*
* @param config List of GPIO configurations
diff --git a/arch/arm/include/asm/arch-tegra114/clock-tables.h b/arch/arm/include/asm/arch-tegra114/clock-tables.h
index d8fa0e1..3f910f5 100644
--- a/arch/arm/include/asm/arch-tegra114/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra114/clock-tables.h
@@ -38,6 +38,7 @@
/* These are the base clocks (inputs to the Tegra SOC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
+ CLOCK_ID_CLK_M,
CLOCK_ID_COUNT, /* number of PLLs */
CLOCK_ID_DISPLAY2, /* placeholder */
diff --git a/arch/arm/include/asm/arch-tegra114/clock.h b/arch/arm/include/asm/arch-tegra114/clock.h
index abbefcd..9bee397 100644
--- a/arch/arm/include/asm/arch-tegra114/clock.h
+++ b/arch/arm/include/asm/arch-tegra114/clock.h
@@ -25,4 +25,7 @@
#define OSC_FREQ_SHIFT 28
#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)
+/* CLK_RST_CONTROLLER_PLLC_MISC_0 */
+#define PLLC_IDDQ (1 << 26)
+
#endif /* _TEGRA114_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/clock-tables.h b/arch/arm/include/asm/arch-tegra124/clock-tables.h
index 3c67e72..9466b4f 100644
--- a/arch/arm/include/asm/arch-tegra124/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra124/clock-tables.h
@@ -30,6 +30,7 @@
/* These are the base clocks (inputs to the Tegra SoC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
+ CLOCK_ID_CLK_M,
CLOCK_ID_COUNT, /* number of PLLs */
diff --git a/arch/arm/include/asm/arch-tegra124/clock.h b/arch/arm/include/asm/arch-tegra124/clock.h
index e202cc5..ff99b9d 100644
--- a/arch/arm/include/asm/arch-tegra124/clock.h
+++ b/arch/arm/include/asm/arch-tegra124/clock.h
@@ -16,6 +16,9 @@
#define OSC_FREQ_SHIFT 28
#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)
+/* CLK_RST_CONTROLLER_PLLC_MISC_0 */
+#define PLLC_IDDQ (1 << 26)
+
/* CLK_RST_CONTROLLER_CLK_SOURCE_SOR0_0 */
#define SOR0_CLK_SEL0 (1 << 14)
#define SOR0_CLK_SEL1 (1 << 15)
diff --git a/arch/arm/include/asm/arch-tegra20/clock-tables.h b/arch/arm/include/asm/arch-tegra20/clock-tables.h
index 894be08..812e876 100644
--- a/arch/arm/include/asm/arch-tegra20/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra20/clock-tables.h
@@ -29,6 +29,7 @@
/* These are the base clocks (inputs to the Tegra SOC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
+ CLOCK_ID_CLK_M,
CLOCK_ID_COUNT, /* number of clocks */
CLOCK_ID_NONE = -1,
diff --git a/arch/arm/include/asm/arch-tegra210/clock-tables.h b/arch/arm/include/asm/arch-tegra210/clock-tables.h
index 175040d..a612485 100644
--- a/arch/arm/include/asm/arch-tegra210/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra210/clock-tables.h
@@ -30,6 +30,7 @@
/* These are the base clocks (inputs to the Tegra SoC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
+ CLOCK_ID_CLK_M,
CLOCK_ID_COUNT, /* number of PLLs */
diff --git a/arch/arm/include/asm/arch-tegra30/clock-tables.h b/arch/arm/include/asm/arch-tegra30/clock-tables.h
index cb619f1..f7c7af8 100644
--- a/arch/arm/include/asm/arch-tegra30/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra30/clock-tables.h
@@ -38,6 +38,7 @@
/* These are the base clocks (inputs to the Tegra SOC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
+ CLOCK_ID_CLK_M,
CLOCK_ID_COUNT, /* number of PLLs */
CLOCK_ID_DISPLAY2, /* Tegra3, placeholder */
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index f9dfcd0..f75c6c6 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -461,6 +461,11 @@
writel(mask, &clkrst->crc_cpu_cmplx_clr);
}
+unsigned int __weak clk_m_get_rate(unsigned int parent_rate)
+{
+ return parent_rate;
+}
+
unsigned clock_get_rate(enum clock_id clkid)
{
struct clk_pll *pll;
@@ -472,6 +477,9 @@
if (clkid == CLOCK_ID_OSC)
return parent_rate;
+ if (clkid == CLOCK_ID_CLK_M)
+ return clk_m_get_rate(parent_rate);
+
pll = get_pll(clkid);
if (!pll)
return 0;
@@ -483,7 +491,16 @@
* PLLU uses p_mask/p_shift for VCO on all but T210,
* T210 uses normal DIVP. Handled in pllinfo table.
*/
- divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
+#ifdef CONFIG_TEGRA210
+ /*
+ * PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is
+ * not applied. pllP_out2 does have divp applied. All other pllP_outN
+ * are divided down from pllP_out0. We only support pllP_out0 in
+ * U-Boot at the time of writing this comment.
+ */
+ if (clkid != CLOCK_ID_PERIPH)
+#endif
+ divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
do_div(rate, divm);
return rate;
}
@@ -613,8 +630,10 @@
pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M);
debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]);
debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c
index 5e805a7..e6ef873 100644
--- a/arch/arm/mach-tegra/tegra114/clock.c
+++ b/arch/arm/mach-tegra/tegra114/clock.c
@@ -629,6 +629,11 @@
tegra30_set_up_pllp();
+ /* clear IDDQ before accessing any other PLLC registers */
+ pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+ clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ);
+ udelay(2);
+
/*
* PLLC output frequency set to 600Mhz
* PLLD output frequency set to 925Mhz
@@ -679,8 +684,8 @@
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
u32 freq, val;
- freq = clock_get_rate(CLOCK_ID_OSC);
- debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
+ freq = clock_get_rate(CLOCK_ID_CLK_M);
+ debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
/* ARM CNTFRQ */
asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c
index 61e8ab7..1e71146 100644
--- a/arch/arm/mach-tegra/tegra124/clock.c
+++ b/arch/arm/mach-tegra/tegra124/clock.c
@@ -809,6 +809,11 @@
tegra30_set_up_pllp();
+ /* clear IDDQ before accessing any other PLLC registers */
+ pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL];
+ clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ);
+ udelay(2);
+
/*
* PLLC output frequency set to 600Mhz
* PLLD output frequency set to 925Mhz
@@ -859,8 +864,8 @@
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
u32 freq, val;
- freq = clock_get_rate(CLOCK_ID_OSC);
- debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
+ freq = clock_get_rate(CLOCK_ID_CLK_M);
+ debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
/* ARM CNTFRQ */
asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig
index bd34db7..b07363a 100644
--- a/arch/arm/mach-tegra/tegra210/Kconfig
+++ b/arch/arm/mach-tegra/tegra210/Kconfig
@@ -18,6 +18,14 @@
HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA,
a GPIO expansion header, and an analog audio jack.
+config TARGET_P2371_2180
+ bool "NVIDIA Tegra210 P2371-2180 board"
+ help
+ P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The
+ combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
+ micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and
+ two GPIO expansion headers.
+
config TARGET_P2571
bool "NVIDIA Tegra210 P2571 base board"
help
@@ -30,6 +38,7 @@
source "board/nvidia/e2220-1170/Kconfig"
source "board/nvidia/p2371-0000/Kconfig"
+source "board/nvidia/p2371-2180/Kconfig"
source "board/nvidia/p2571/Kconfig"
endif
diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c
index 830a33f..6d75d37 100644
--- a/arch/arm/mach-tegra/tegra210/clock.c
+++ b/arch/arm/mach-tegra/tegra210/clock.c
@@ -998,18 +998,27 @@
udelay(2);
}
+unsigned int clk_m_get_rate(unsigned parent_rate)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 value, div;
+
+ value = readl(&clkrst->crc_spare_reg0);
+ div = ((value >> 2) & 0x3) + 1;
+
+ return parent_rate / div;
+}
+
void arch_timer_init(void)
{
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
u32 freq, val;
- freq = clock_get_rate(CLOCK_ID_OSC);
- debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
+ freq = clock_get_rate(CLOCK_ID_CLK_M);
+ debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
- /* ARM CNTFRQ */
-#ifndef CONFIG_ARM64
- asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
-#endif
+ if (current_el() == 3)
+ asm("msr cntfrq_el0, %0\n" : : "r" (freq));
/* Only Tegra114+ has the System Counter regs */
debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
diff --git a/board/nvidia/p2371-2180/Kconfig b/board/nvidia/p2371-2180/Kconfig
new file mode 100644
index 0000000..8622bda
--- /dev/null
+++ b/board/nvidia/p2371-2180/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_P2371_2180
+
+config SYS_BOARD
+ default "p2371-2180"
+
+config SYS_VENDOR
+ default "nvidia"
+
+config SYS_CONFIG_NAME
+ default "p2371-2180"
+
+endif
diff --git a/board/nvidia/p2371-2180/MAINTAINERS b/board/nvidia/p2371-2180/MAINTAINERS
new file mode 100644
index 0000000..8153774
--- /dev/null
+++ b/board/nvidia/p2371-2180/MAINTAINERS
@@ -0,0 +1,6 @@
+P2371-2180 BOARD
+M: Tom Warren <twarren@nvidia.com>
+S: Maintained
+F: board/nvidia/p2371-2180/
+F: include/configs/p2371-2180.h
+F: configs/p2371-2180_defconfig
diff --git a/board/nvidia/p2371-2180/Makefile b/board/nvidia/p2371-2180/Makefile
new file mode 100644
index 0000000..10aefb0
--- /dev/null
+++ b/board/nvidia/p2371-2180/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2013-2015
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += p2371-2180.o
diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c
new file mode 100644
index 0000000..cf2dd0b
--- /dev/null
+++ b/board/nvidia/p2371-2180/p2371-2180.c
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "../p2571/max77620_init.h"
+#include "pinmux-config-p2371-2180.h"
+
+void pin_mux_mmc(void)
+{
+ struct udevice *dev;
+ uchar val;
+ int ret;
+
+ /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
+ debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
+ ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
+ return;
+ }
+ /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ val = 0xF2;
+ ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
+ if (ret)
+ printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
+}
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_clear_tristate_input_clamping();
+
+ gpio_config_table(p2371_2180_gpio_inits,
+ ARRAY_SIZE(p2371_2180_gpio_inits));
+
+ pinmux_config_pingrp_table(p2371_2180_pingrps,
+ ARRAY_SIZE(p2371_2180_pingrps));
+
+ pinmux_config_drvgrp_table(p2371_2180_drvgrps,
+ ARRAY_SIZE(p2371_2180_drvgrps));
+}
diff --git a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
new file mode 100644
index 0000000..ff89b9e
--- /dev/null
+++ b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
+ *
+ * To generate this file, use the tegra-pinmux-scripts tool available from
+ * https://github.com/NVIDIA/tegra-pinmux-scripts
+ * Run "board-to-uboot.py p2371-2180".
+ */
+
+#ifndef _PINMUX_CONFIG_P2371_2180_H_
+#define _PINMUX_CONFIG_P2371_2180_H_
+
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
+ }
+
+static const struct tegra_gpio_config p2371_2180_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(A5, IN),
+ GPIO_INIT(E6, IN),
+ GPIO_INIT(H0, OUT0),
+ GPIO_INIT(H1, OUT0),
+ GPIO_INIT(H2, IN),
+ GPIO_INIT(H3, OUT0),
+ GPIO_INIT(H4, OUT0),
+ GPIO_INIT(H5, IN),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT0),
+ GPIO_INIT(I0, OUT0),
+ GPIO_INIT(I1, IN),
+ GPIO_INIT(I2, OUT0),
+ GPIO_INIT(K4, IN),
+ GPIO_INIT(K5, OUT0),
+ GPIO_INIT(K6, IN),
+ GPIO_INIT(K7, IN),
+ GPIO_INIT(L1, IN),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S5, OUT0),
+ GPIO_INIT(S6, OUT0),
+ GPIO_INIT(S7, OUT0),
+ GPIO_INIT(T0, OUT0),
+ GPIO_INIT(T1, OUT0),
+ GPIO_INIT(V1, OUT0),
+ GPIO_INIT(V2, OUT0),
+ GPIO_INIT(V3, IN),
+ GPIO_INIT(V5, OUT0),
+ GPIO_INIT(V6, OUT0),
+ GPIO_INIT(X0, IN),
+ GPIO_INIT(X1, IN),
+ GPIO_INIT(X2, IN),
+ GPIO_INIT(X3, IN),
+ GPIO_INIT(X4, IN),
+ GPIO_INIT(X5, IN),
+ GPIO_INIT(X6, IN),
+ GPIO_INIT(X7, IN),
+ GPIO_INIT(Y0, IN),
+ GPIO_INIT(Y1, IN),
+ GPIO_INIT(Z0, IN),
+ GPIO_INIT(Z2, IN),
+ GPIO_INIT(Z3, OUT0),
+ GPIO_INIT(BB2, OUT0),
+ GPIO_INIT(BB3, OUT0),
+ GPIO_INIT(CC1, IN),
+};
+
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .od = PMUX_PIN_OD_##_od, \
+ .e_io_hv = PMUX_PIN_E_IO_HV_##_e_io_hv, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ }
+
+static const struct pmux_pingrp_config p2371_2180_pingrps[] = {
+ /* pingrp, mux, pull, tri, e_input, od, e_io_hv */
+ PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
+ PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(PEX_WAKE_N_PA2, PE, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(PEX_L1_RST_N_PA3, PE1, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
+ PINCFG(PEX_L1_CLKREQ_N_PA4, PE1, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PA6, SATA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_FS_PB0, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_DIN_PB1, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_DOUT_PB2, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP1_SCLK_PB3, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_MOSI_PB4, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_MISO_PB5, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_SCK_PB6, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI2_CS0_PB7, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_MOSI_PC0, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_MISO_PC1, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_SCK_PC2, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_CS0_PC3, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI1_CS1_PC4, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_SCK_PC5, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_CS0_PC6, SPI4, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_MOSI_PC7, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SPI4_MISO_PD0, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_TX_PD1, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_RX_PD2, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_RTS_PD3, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART3_CTS_PD4, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC1_CLK_PE0, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC1_DAT_PE1, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC2_CLK_PE2, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC2_DAT_PE3, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC3_CLK_PE4, DMIC3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DMIC3_DAT_PE5, DMIC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PE6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(UART2_TX_PG0, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_RX_PG1, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_RTS_PG2, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART2_CTS_PG3, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_EN_PH0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_RST_PH1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(WIFI_WAKE_AP_PH2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AP_WAKE_BT_PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AP_WAKE_NFC_PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(NFC_INT_PI1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(GPS_EN_PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPS_RST_PI3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_TX_PI4, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_RX_PI5, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_RTS_PI6, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART4_CTS_PI7, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(GEN1_I2C_SDA_PJ0, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN1_I2C_SCL_PJ1, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(GEN2_I2C_SCL_PJ2, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(GEN2_I2C_SDA_PJ3, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(DAP4_FS_PJ4, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_DIN_PJ5, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_DOUT_PJ6, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP4_SCLK_PJ7, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK0, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK1, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK2, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK3, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PK6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PK7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PL0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PL1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_CLK_PM0, SDMMC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_CMD_PM1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT3_PM2, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT2_PM3, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT1_PM4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC1_DAT0_PM5, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_CLK_PP0, SDMMC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_CMD_PP1, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT3_PP2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT2_PP3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT1_PP4, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(SDMMC3_DAT0_PP5, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_MCLK_PS0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM2_MCLK_PS1, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_I2C_SCL_PS2, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CAM_I2C_SDA_PS3, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CAM_RST_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_AF_EN_PS5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_FLASH_EN_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_PWDN_PS7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM2_PWDN_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM1_STROBE_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_RTS_PU2, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(UART1_CTS_PU3, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_RST_PV2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_GPIO1_PV3, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_GPIO2_PV4, PWM1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(AP_READY_PV5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_CLK_PV7, TOUCH, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(TOUCH_INT_PX1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(MOTION_INT_PX2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(ALS_PROX_INT_PX3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_POWER_ON_PX5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_VOL_DOWN_PX7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_SLIDE_SW_PY0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(BUTTON_HOME_PY1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(LCD_TE_PY2, DISPLAYA, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PWR_I2C_SCL_PY3, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(PWR_I2C_SDA_PY4, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(CLK_32K_OUT_PY5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PZ4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PZ5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_FS_PAA0, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(AUD_MCLK_PBB0, AUD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PBB4, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL),
+ PINCFG(SPDIF_OUT_PCC2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(SPDIF_IN_PCC3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN0_PCC4, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(USB_VBUS_EN1_PCC5, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
+ PINCFG(DP_HPD0_PCC6, DP, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(PCC7, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL),
+ PINCFG(SPI2_CS1_PDD0, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_SCK_PEE0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_CS_N_PEE1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO0_PEE2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO1_PEE3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO2_PEE4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(QSPI_IO3_PEE5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CORE_PWR_REQ, CORE, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(JTAG_RTCK, JTAG, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CLK_REQ, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(SHUTDOWN, SHUTDOWN, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+};
+
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static const struct pmux_drvgrp_config p2371_2180_drvgrps[] = {
+};
+
+#endif /* PINMUX_CONFIG_P2371_2180_H */
diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig
index 72e5ab3..03eed5d 100644
--- a/configs/e2220-1170_defconfig
+++ b/configs/e2220-1170_defconfig
@@ -15,3 +15,4 @@
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_SYS_PROMPT="Tegra210 (E2220-1170) # "
diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig
index 71a9a75..f8ca4d3 100644
--- a/configs/p2371-0000_defconfig
+++ b/configs/p2371-0000_defconfig
@@ -15,3 +15,4 @@
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_SYS_PROMPT="Tegra210 (P2371-0000) # "
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig
new file mode 100644
index 0000000..98448ee
--- /dev/null
+++ b/configs/p2371-2180_defconfig
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_TEGRA=y
+CONFIG_TEGRA210=y
+CONFIG_TARGET_P2371_2180=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-2180"
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_SPL_DM=y
+CONFIG_TEGRA114_SPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # "
diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig
index 877a905..1d0b022 100644
--- a/configs/p2571_defconfig
+++ b/configs/p2571_defconfig
@@ -15,3 +15,4 @@
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_SYS_PROMPT="Tegra210 (P2571) # "
diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h
index dff3f2a..998a69a 100644
--- a/include/configs/e2220-1170.h
+++ b/include/configs/e2220-1170.h
@@ -13,7 +13,6 @@
#include "tegra210-common.h"
/* High-level configuration options */
-#define V_PROMPT "Tegra210 (E2220-1170) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA E2220-1170"
/* Board-specific serial config */
@@ -60,6 +59,4 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-#define COUNTER_FREQUENCY 38400000
-
#endif /* _E2220_1170_H */
diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h
index 9d7b650..f2a713d 100644
--- a/include/configs/p2371-0000.h
+++ b/include/configs/p2371-0000.h
@@ -13,7 +13,6 @@
#include "tegra210-common.h"
/* High-level configuration options */
-#define V_PROMPT "Tegra210 (P2371-0000) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-0000"
/* Board-specific serial config */
@@ -60,6 +59,4 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-#define COUNTER_FREQUENCY 38400000
-
#endif /* _P2371_0000_H */
diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h
new file mode 100644
index 0000000..3bdf196
--- /dev/null
+++ b/include/configs/p2371-2180.h
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2013-2015
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _P2371_2180_H
+#define _P2371_2180_H
+
+#include <linux/sizes.h>
+
+#include "tegra210-common.h"
+
+/* High-level configuration options */
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+
+/* SPI */
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB2.0 Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_DHCP
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+/* Crystal is 38.4MHz. clk_m runs at half that rate */
+#define COUNTER_FREQUENCY 19200000
+
+#endif /* _P2371_2180_H */
diff --git a/include/configs/p2571.h b/include/configs/p2571.h
index 356c941..c65d3e5 100644
--- a/include/configs/p2571.h
+++ b/include/configs/p2571.h
@@ -13,7 +13,6 @@
#include "tegra210-common.h"
/* High-level configuration options */
-#define V_PROMPT "Tegra210 (P2571) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2571"
/* Board-specific serial config */
@@ -61,7 +60,6 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-#define COUNTER_FREQUENCY 38400000
#define CONFIG_OF_BOARD_SETUP
#endif /* _P2571_H */