ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
diff --git a/Makefile b/Makefile
index a672f3a..953c6bb 100644
--- a/Makefile
+++ b/Makefile
@@ -218,6 +218,7 @@
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
+LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
@@ -1856,6 +1857,76 @@
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+M5475AFE_config \
+M5475BFE_config \
+M5475CFE_config \
+M5475DFE_config \
+M5475EFE_config \
+M5475FFE_config \
+M5475GFE_config : unconfig
+ @case "$@" in \
+ M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+
+M5485AFE_config \
+M5485BFE_config \
+M5485CFE_config \
+M5485DFE_config \
+M5485EFE_config \
+M5485FFE_config \
+M5485GFE_config \
+M5485HFE_config : unconfig
+ @case "$@" in \
+ M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485HFE_config) BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+
#########################################################################
## MPC83xx Systems
#########################################################################