arm: mvebu: dts: sync DTS
Update the uDPU DTS to the version that is pending upstream [1][2][3][4].
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 1f534c0..f21a855 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -16,7 +16,7 @@
/ {
model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720";
+ compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
@@ -28,35 +28,34 @@
};
leds {
- pinctrl-names = "default";
compatible = "gpio-leds";
- power1 {
+ led-power1 {
label = "udpu:green:power";
gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
};
- power2 {
+ led-power2 {
label = "udpu:red:power";
gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
};
- network1 {
+ led-network1 {
label = "udpu:green:network";
gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
};
- network2 {
+ led-network2 {
label = "udpu:red:network";
gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
};
- alarm1 {
+ led-alarm1 {
label = "udpu:green:alarm";
gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
};
- alarm2 {
+ led-alarm2 {
label = "udpu:red:alarm";
gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
};
@@ -99,7 +98,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <54000000>;
@@ -153,14 +152,12 @@
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- nct375@48 {
- status = "okay";
+ temp-sensor@48 {
compatible = "ti,tmp75c";
reg = <0x48>;
};
- nct375@49 {
- status = "okay";
+ temp-sensor@49 {
compatible = "ti,tmp75c";
reg = <0x49>;
};