Merge branch 'master' of /home/stefan/git/u-boot/u-boot
diff --git a/Makefile b/Makefile
index 217e1c9..e51483d 100644
--- a/Makefile
+++ b/Makefile
@@ -210,7 +210,7 @@
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
@@ -378,6 +378,7 @@
TAG_SUBDIRS += fs/fat
TAG_SUBDIRS += fs/fdos
TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += fs/yaffs2
TAG_SUBDIRS += net
TAG_SUBDIRS += disk
TAG_SUBDIRS += common
@@ -2010,8 +2011,11 @@
#########################################################################
MPC8313ERDB_33_config \
-MPC8313ERDB_66_config: unconfig
+MPC8313ERDB_66_config \
+MPC8313ERDB_NAND_33_config \
+MPC8313ERDB_NAND_66_config: unconfig
@mkdir -p $(obj)include
+ @mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
@@ -2019,6 +2023,11 @@
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _NAND_,$@)" ] ; then \
+ $(XECHO) -n "...NAND..." ; \
+ echo "TEXT_BASE = 0x00100000" > $(obj)/board/freescale/mpc8313erdb/config.tmp ; \
+ echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
@@ -2368,13 +2377,13 @@
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
at91sam9261ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
@@ -2396,10 +2405,10 @@
#########################################################################
at91cap9adk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
at91sam9260ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
index 6ff0f4f..9800083 100644
--- a/board/bf537-stamp/nand.c
+++ b/board/bf537-stamp/nand.c
@@ -37,34 +37,29 @@
/*
* hardware specific access to control-lines
*/
-static void bfin_hwcontrol(struct mtd_info *mtd, int cmd)
+static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
register struct nand_chip *this = mtd->priv;
+ u32 IO_ADDR_W = (u32) this->IO_ADDR_W;
- switch (cmd) {
-
- case NAND_CTL_SETCLE:
- this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
- break;
- case NAND_CTL_CLRCLE:
- this->IO_ADDR_W = CFG_NAND_BASE;
- break;
-
- case NAND_CTL_SETALE:
- this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
- break;
- case NAND_CTL_CLRALE:
- this->IO_ADDR_W = CFG_NAND_BASE;
- break;
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if( ctrl & NAND_CLE )
+ IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
+ else
+ IO_ADDR_W = CFG_NAND_BASE;
+ if( ctrl & NAND_ALE )
+ IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
+ else
+ IO_ADDR_W = CFG_NAND_BASE;
+ this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
-
this->IO_ADDR_R = this->IO_ADDR_W;
/* Drain the writebuffer */
SSYNC();
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
int bfin_device_ready(struct mtd_info *mtd)
@@ -79,11 +74,11 @@
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
+ * - ecc.mode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
@@ -98,8 +93,8 @@
*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
*PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
- nand->hwcontrol = bfin_hwcontrol;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = bfin_hwcontrol;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->dev_ready = bfin_device_ready;
nand->chip_delay = 30;
}
diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c
index 09c0b04..3ccbf650 100644
--- a/board/dave/PPChameleonEVB/nand.c
+++ b/board/dave/PPChameleonEVB/nand.c
@@ -21,7 +21,7 @@
*/
#include <common.h>
-
+#include <asm/io.h>
#if defined(CONFIG_CMD_NAND)
@@ -31,31 +31,28 @@
* hardware specific access to control-lines
* function borrowed from Linux 2.6 (drivers/mtd/nand/ppchameleonevb.c)
*/
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void ppchameleonevb_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- struct nand_chip *this = mtdinfo->priv;
+ struct nand_chip *this = mtd->priv;
ulong base = (ulong) this->IO_ADDR_W;
- switch(cmd) {
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)base);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)base);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)base);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)base);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)base);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)base);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ MACRO_NAND_CTL_SETCLE((unsigned long)base);
+ else
+ MACRO_NAND_CTL_CLRCLE((unsigned long)base);
+ if ( ctrl & NAND_ALE )
+ MACRO_NAND_CTL_CLRCLE((unsigned long)base);
+ else
+ MACRO_NAND_CTL_CLRALE((unsigned long)base);
+ if ( ctrl & NAND_NCE )
+ MACRO_NAND_ENABLE_CE((unsigned long)base);
+ else
+ MACRO_NAND_DISABLE_CE((unsigned long)base);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
@@ -92,11 +89,11 @@
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
+ * - ecc.mode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
@@ -108,9 +105,9 @@
int board_nand_init(struct nand_chip *nand)
{
- nand->hwcontrol = ppchameleonevb_hwcontrol;
+ nand->cmd_ctrl = ppchameleonevb_hwcontrol;
nand->dev_ready = ppchameleonevb_device_ready;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->chip_delay = NAND_BIG_DELAY_US;
nand->options = NAND_SAMSUNG_LP_OPTIONS;
return 0;
diff --git a/board/delta/nand.c b/board/delta/nand.c
index 5024056..b007b09 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -69,7 +69,7 @@
/*
* not required for Monahans DFC
*/
-static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
return;
}
@@ -110,30 +110,6 @@
}
-/*
- * These functions are quite problematic for the DFC. Luckily they are
- * not used in the current nand code, except for nand_command, which
- * we've defined our own anyway. The problem is, that we always need
- * to write 4 bytes to the DFC Data Buffer, but in these functions we
- * don't know if to buffer the bytes/half words until we've gathered 4
- * bytes or if to send them straight away.
- *
- * Solution: Don't use these with Mona's DFC and complain loudly.
- */
-static void dfc_write_word(struct mtd_info *mtd, u16 word)
-{
- printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n");
-}
-static void dfc_write_byte(struct mtd_info *mtd, u_char byte)
-{
- printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
-}
-
-/* The original:
- * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
- *
- * Shouldn't this be "u_char * const buf" ?
- */
static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
{
int i=0, j;
@@ -168,7 +144,7 @@
*/
static u16 dfc_read_word(struct mtd_info *mtd)
{
- printf("dfc_write_byte: UNIMPLEMENTED.\n");
+ printf("dfc_read_word: UNIMPLEMENTED.\n");
return 0;
}
@@ -289,9 +265,10 @@
/* this function is called after Programm and Erase Operations to
* check for success or failure */
-static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long ndsr=0, event=0;
+ int state = this->state;
if(state == FL_WRITING) {
event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
@@ -439,7 +416,7 @@
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
+ * - ecc.mode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
@@ -561,20 +538,18 @@
/* wait(10); */
- nand->hwcontrol = dfc_hwcontrol;
+ nand->cmd_ctrl = dfc_hwcontrol;
/* nand->dev_ready = dfc_device_ready; */
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->options = NAND_BUSWIDTH_16;
nand->waitfunc = dfc_wait;
nand->read_byte = dfc_read_byte;
- nand->write_byte = dfc_write_byte;
nand->read_word = dfc_read_word;
- nand->write_word = dfc_write_word;
nand->read_buf = dfc_read_buf;
nand->write_buf = dfc_write_buf;
nand->cmdfunc = dfc_cmdfunc;
- nand->autooob = &delta_oob;
+/* nand->autooob = &delta_oob; */
nand->badblock_pattern = &delta_bbt_descr;
return 0;
}
diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c
index 7bf6847..40d1efb 100644
--- a/board/esd/common/esd405ep_nand.c
+++ b/board/esd/common/esd405ep_nand.c
@@ -30,28 +30,26 @@
/*
* hardware specific access to control-lines
*/
-static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch(cmd) {
- case NAND_CTL_SETCLE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
- break;
- case NAND_CTL_CLRCLE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
- break;
- case NAND_CTL_SETALE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
- break;
- case NAND_CTL_CLRALE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
- break;
- case NAND_CTL_SETNCE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
- break;
- case NAND_CTL_CLRNCE:
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
- break;
+ struct nand_chip *this = mtd->priv;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
+ else
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
+ if ( ctrl & NAND_ALE )
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
+ else
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
+ if ( ctrl & NAND_NCE )
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
+ else
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
@@ -77,9 +75,9 @@
/*
* Initialize nand_chip structure
*/
- nand->hwcontrol = esd405ep_nand_hwcontrol;
+ nand->cmd_ctrl = esd405ep_nand_hwcontrol;
nand->dev_ready = esd405ep_nand_device_ready;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->chip_delay = NAND_BIG_DELAY_US;
nand->options = NAND_SAMSUNG_LP_OPTIONS;
return 0;
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 344a614..f84912e 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -40,36 +40,26 @@
#define SET_ALE 0x08
#define CLR_ALE ~SET_ALE
-static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtdinfo->priv;
- volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+/* volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */
u32 nand_baseaddr = (u32) this->IO_ADDR_W;
- switch (cmd) {
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- break;
- case NAND_CTL_SETCLE:
- nand_baseaddr |= SET_CLE;
- break;
- case NAND_CTL_CLRCLE:
- nand_baseaddr &= CLR_CLE;
- break;
- case NAND_CTL_SETALE:
- nand_baseaddr |= SET_ALE;
- break;
- case NAND_CTL_CLRALE:
- nand_baseaddr |= CLR_ALE;
- break;
- case NAND_CTL_SETWP:
- fbcs->csmr2 |= FBCS_CSMR_WP;
- break;
- case NAND_CTL_CLRWP:
- fbcs->csmr2 &= ~FBCS_CSMR_WP;
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ nand_baseaddr |= SET_CLE;
+ else
+ nand_baseaddr &= CLR_CLE;
+ if ( ctrl & NAND_ALE )
+ nand_baseaddr |= SET_ALE;
+ else
+ nand_baseaddr &= CLR_ALE;
}
this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
@@ -103,8 +93,8 @@
gpio->podr_timer = 0;
nand->chip_delay = 50;
- nand->eccmode = NAND_ECC_SOFT;
- nand->hwcontrol = nand_hwcontrol;
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = nand_hwcontrol;
nand->read_byte = nand_read_byte;
nand->write_byte = nand_write_byte;
nand->dev_ready = nand_dev_ready;
diff --git a/board/freescale/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk
index f768264..fd72a14 100644
--- a/board/freescale/mpc8313erdb/config.mk
+++ b/board/freescale/mpc8313erdb/config.mk
@@ -1 +1,7 @@
+ifndef NAND_SPL
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+endif
+
+ifndef TEXT_BASE
TEXT_BASE = 0xFE000000
+endif
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 7cbdb7b..ebb703d 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -29,6 +29,8 @@
#include <pci.h>
#include <mpc83xx.h>
#include <vsc7385.h>
+#include <ns16550.h>
+#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -50,6 +52,7 @@
return 0;
}
+#ifndef CONFIG_NAND_SPL
static struct pci_region pci_regions[] = {
{
bus_start: CFG_PCI1_MEM_BASE,
@@ -128,3 +131,32 @@
#endif
}
#endif
+#else /* CONFIG_NAND_SPL */
+void board_init_f(ulong bootflag)
+{
+ board_early_init_f();
+ NS16550_init((NS16550_t)(CFG_IMMR + 0x4500),
+ CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+ puts("NAND boot... ");
+ init_timebase();
+ initdram(0);
+ relocate_code(CFG_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+ CFG_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (gd->flags & GD_FLG_SILENT)
+ return;
+
+ if (c == '\n')
+ NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), '\r');
+
+ NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), c);
+}
+#endif
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index afd8b9d..3a6347f 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -58,8 +58,10 @@
*/
static long fixed_sdram(void)
{
- volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+
+#ifndef CFG_RAMBOOT
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
u32 msize_log2 = __ilog2(msize);
im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
@@ -100,6 +102,7 @@
/* enable DDR controller */
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+#endif
return msize;
}
diff --git a/board/nc650/nand.c b/board/nc650/nand.c
index 8617f74..7dca97f 100644
--- a/board/nc650/nand.c
+++ b/board/nc650/nand.c
@@ -22,7 +22,7 @@
*/
#include <common.h>
-
+#include <asm/io.h>
#if defined(CONFIG_CMD_NAND)
@@ -32,57 +32,49 @@
/*
* hardware specific access to control-lines
*/
-static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
+static void nc650_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- switch(cmd) {
- case NAND_CTL_SETCLE:
- this->IO_ADDR_W += 2;
- break;
- case NAND_CTL_CLRCLE:
- this->IO_ADDR_W -= 2;
- break;
- case NAND_CTL_SETALE:
- this->IO_ADDR_W += 1;
- break;
- case NAND_CTL_CLRALE:
- this->IO_ADDR_W -= 1;
- break;
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- /* nop */
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ this->IO_ADDR_W += 2;
+ else
+ this->IO_ADDR_W -= 2;
+ if ( ctrl & NAND_ALE )
+ this->IO_ADDR_W += 1;
+ else
+ this->IO_ADDR_W -= 1;
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
#elif defined(CONFIG_IDS852_REV2)
/*
* hardware specific access to control-lines
*/
-static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
+static void nc650_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- switch(cmd) {
- case NAND_CTL_SETCLE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0;
- break;
- case NAND_CTL_CLRCLE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
- break;
- case NAND_CTL_SETALE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0;
- break;
- case NAND_CTL_CLRALE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
- break;
- case NAND_CTL_SETNCE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
- break;
- case NAND_CTL_CLRNCE:
- *(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0;
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W + 0xa);
+ else
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W) + 0x8);
+ if ( ctrl & NAND_ALE )
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W) + 0x9);
+ else
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W) + 0x8);
+ if ( ctrl & NAND_NCE )
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W) + 0x8);
+ else
+ writeb(0, (volatile __u8 *) this->IO_ADDR_W) + 0xc);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
#else
#error Unknown IDS852 module revision
@@ -93,11 +85,11 @@
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
+ * - eccm.ode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
@@ -109,8 +101,8 @@
int board_nand_init(struct nand_chip *nand)
{
- nand->hwcontrol = nc650_hwcontrol;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = nc650_hwcontrol;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->chip_delay = 12;
/* nand->options = NAND_SAMSUNG_LP_OPTIONS;*/
return 0;
diff --git a/board/netstar/nand.c b/board/netstar/nand.c
index b76d2a3..e3ab66f 100644
--- a/board/netstar/nand.c
+++ b/board/netstar/nand.c
@@ -21,6 +21,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#if defined(CONFIG_CMD_NAND)
@@ -32,24 +33,29 @@
#define MASK_CLE 0x02
#define MASK_ALE 0x04
-static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE: IO_ADDR_W |= MASK_CLE; break;
- case NAND_CTL_SETALE: IO_ADDR_W |= MASK_ALE; break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ IO_ADDR_W |= MASK_CLE;
+ if ( ctrl & NAND_ALE )
+ IO_ADDR_W |= MASK_ALE;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+ this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
int board_nand_init(struct nand_chip *nand)
{
nand->options = NAND_SAMSUNG_LP_OPTIONS;
- nand->eccmode = NAND_ECC_SOFT;
- nand->hwcontrol = netstar_nand_hwcontrol;
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = netstar_nand_hwcontrol;
nand->chip_delay = 400;
return 0;
}
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 097e183..99f5737 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -56,43 +56,24 @@
*
* There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
*/
-static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- hwctl |= 0x1;
- break;
- case NAND_CTL_CLRCLE:
- hwctl &= ~0x1;
- break;
- case NAND_CTL_SETALE:
- hwctl |= 0x2;
- break;
- case NAND_CTL_CLRALE:
- hwctl &= ~0x2;
- break;
- case NAND_CTL_SETNCE:
- break;
- case NAND_CTL_CLRNCE:
- writeb(0x00, &(alpr_ndfc->term));
- break;
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ hwctl |= 0x1;
+ else
+ hwctl &= ~0x1;
+ if ( ctrl & NAND_ALE )
+ hwctl |= 0x2;
+ else
+ hwctl &= ~0x2;
+ if ( (ctrl & NAND_NCE) != NAND_NCE)
+ writeb(0x00, &(alpr_ndfc->term));
}
-}
-
-static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *nand = mtd->priv;
-
- if (hwctl & 0x1)
- /*
- * IO_ADDR_W used as CMD[i] reg to support multiple NAND
- * chips.
- */
- writeb(byte, nand->IO_ADDR_W);
- else if (hwctl & 0x2) {
- writeb(byte, &(alpr_ndfc->addr_wait));
- } else
- writeb(byte, &(alpr_ndfc->data));
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static u_char alpr_nand_read_byte(struct mtd_info *mtd)
@@ -158,12 +139,10 @@
{
alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
/* Reference hardware control function */
- nand->hwcontrol = alpr_nand_hwcontrol;
- /* Set command delay time */
- nand->write_byte = alpr_nand_write_byte;
+ nand->cmd_ctrl = alpr_nand_hwcontrol;
nand->read_byte = alpr_nand_read_byte;
nand->write_buf = alpr_nand_write_buf;
nand->read_buf = alpr_nand_read_buf;
diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c
index b1e7041..1ce3c8c 100644
--- a/board/prodrive/pdnb3/nand.c
+++ b/board/prodrive/pdnb3/nand.c
@@ -52,40 +52,26 @@
*
* There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
*/
-static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- hwctl |= 0x1;
- break;
- case NAND_CTL_CLRCLE:
- hwctl &= ~0x1;
- break;
+ struct nand_chip *this = mtd->priv;
- case NAND_CTL_SETALE:
- hwctl |= 0x2;
- break;
- case NAND_CTL_CLRALE:
- hwctl &= ~0x2;
- break;
-
- case NAND_CTL_SETNCE:
- break;
- case NAND_CTL_CLRNCE:
- writeb(0x00, &(pdnb3_ndfc->term));
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ hwctl |= 0x1;
+ else
+ hwctl &= ~0x1;
+ if ( ctrl & NAND_ALE )
+ hwctl |= 0x2;
+ else
+ hwctl &= ~0x2;
+ if ( (ctrl & NAND_NCE) != NAND_NCE)
+ writeb(0x00, &(pdnb3_ndfc->term));
}
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
-static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- if (hwctl & 0x1)
- writeb(byte, &(pdnb3_ndfc->cmd));
- else if (hwctl & 0x2)
- writeb(byte, &(pdnb3_ndfc->addr));
- else
- writeb(byte, &(pdnb3_ndfc->data));
-}
static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
{
@@ -152,16 +138,13 @@
{
pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CFG_NAND_BASE;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
/* Set address of NAND IO lines (Using Linear Data Access Region) */
nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
/* Reference hardware control function */
- nand->hwcontrol = pdnb3_nand_hwcontrol;
- /* Set command delay time */
- nand->hwcontrol = pdnb3_nand_hwcontrol;
- nand->write_byte = pdnb3_nand_write_byte;
+ nand->cmd_ctrl = pdnb3_nand_hwcontrol;
nand->read_byte = pdnb3_nand_read_byte;
nand->write_buf = pdnb3_nand_write_buf;
nand->read_buf = pdnb3_nand_read_buf;
diff --git a/board/sc3/sc3nand.c b/board/sc3/sc3nand.c
index 009567b..45eff28 100644
--- a/board/sc3/sc3nand.c
+++ b/board/sc3/sc3nand.c
@@ -39,30 +39,26 @@
static void *sc3_io_base;
static void *sc3_control_base = (void *)0xEF600700;
-static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- set_bit (SC3_NAND_CLE, sc3_control_base);
- break;
- case NAND_CTL_CLRCLE:
- clear_bit (SC3_NAND_CLE, sc3_control_base);
- break;
-
- case NAND_CTL_SETALE:
- set_bit (SC3_NAND_ALE, sc3_control_base);
- break;
- case NAND_CTL_CLRALE:
- clear_bit (SC3_NAND_ALE, sc3_control_base);
- break;
-
- case NAND_CTL_SETNCE:
- set_bit (SC3_NAND_CE, sc3_control_base);
- break;
- case NAND_CTL_CLRNCE:
- clear_bit (SC3_NAND_CE, sc3_control_base);
- break;
+ struct nand_chip *this = mtd->priv;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ set_bit (SC3_NAND_CLE, sc3_control_base);
+ else
+ clear_bit (SC3_NAND_CLE, sc3_control_base);
+ if ( ctrl & NAND_ALE )
+ set_bit (SC3_NAND_ALE, sc3_control_base);
+ else
+ clear_bit (SC3_NAND_ALE, sc3_control_base);
+ if ( ctrl & NAND_NCE )
+ set_bit (SC3_NAND_CE, sc3_control_base);
+ else
+ clear_bit (SC3_NAND_CE, sc3_control_base);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int sc3_nand_dev_ready(struct mtd_info *mtd)
@@ -79,14 +75,14 @@
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
sc3_io_base = (void *) CFG_NAND_BASE;
/* Set address of NAND IO lines (Using Linear Data Access Region) */
nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
/* Reference hardware control function */
- nand->hwcontrol = sc3_nand_hwcontrol;
+ nand->cmd_ctrl = sc3_nand_hwcontrol;
nand->dev_ready = sc3_nand_dev_ready;
nand->select_chip = sc3_select_chip;
return 0;
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index cde0296..a0ec254 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -1068,24 +1068,22 @@
static u8 hwctl = 0;
-static void upmnand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- hwctl |= 0x1;
- break;
- case NAND_CTL_CLRCLE:
- hwctl &= ~0x1;
- break;
+ struct nand_chip *this = mtd->priv;
- case NAND_CTL_SETALE:
- hwctl |= 0x2;
- break;
-
- case NAND_CTL_CLRALE:
- hwctl &= ~0x2;
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
+ hwctl |= 0x1;
+ else
+ hwctl &= ~0x1;
+ if ( ctrl & NAND_ALE )
+ hwctl |= 0x2;
+ else
+ hwctl &= ~0x2;
}
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
@@ -1188,9 +1186,9 @@
memctl->memc_br3 = CFG_NAND_BR;
memctl->memc_mbmr = (MxMR_OP_NORM);
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
- nand->hwcontrol = upmnand_hwcontrol;
+ nand->cmd_ctrl = upmnand_hwcontrol;
nand->read_byte = upmnand_read_byte;
nand->write_byte = upmnand_write_byte;
nand->dev_ready = tqm8272_dev_ready;
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index ca16578..09bcbb2 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -69,7 +69,7 @@
/*
* not required for Monahans DFC
*/
-static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
return;
}
@@ -110,25 +110,6 @@
}
-/*
- * These functions are quite problematic for the DFC. Luckily they are
- * not used in the current nand code, except for nand_command, which
- * we've defined our own anyway. The problem is, that we always need
- * to write 4 bytes to the DFC Data Buffer, but in these functions we
- * don't know if to buffer the bytes/half words until we've gathered 4
- * bytes or if to send them straight away.
- *
- * Solution: Don't use these with Mona's DFC and complain loudly.
- */
-static void dfc_write_word(struct mtd_info *mtd, u16 word)
-{
- printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n");
-}
-static void dfc_write_byte(struct mtd_info *mtd, u_char byte)
-{
- printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
-}
-
/* The original:
* static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
*
@@ -168,7 +149,7 @@
*/
static u16 dfc_read_word(struct mtd_info *mtd)
{
- printf("dfc_write_byte: UNIMPLEMENTED.\n");
+ printf("dfc_read_word: UNIMPLEMENTED.\n");
return 0;
}
@@ -289,9 +270,10 @@
/* this function is called after Programm and Erase Operations to
* check for success or failure */
-static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long ndsr=0, event=0;
+ int state = this->state;
if(state == FL_WRITING) {
event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
@@ -435,11 +417,11 @@
* argument are board-specific (per include/linux/mtd/nand_new.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
+ * - ecc.mode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
@@ -560,21 +542,18 @@
/* wait 10 us due to cmd buffer clear reset */
/* wait(10); */
-
- nand->hwcontrol = dfc_hwcontrol;
+ nand->cmd_ctrl = dfc_hwcontrol;
/* nand->dev_ready = dfc_device_ready; */
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->options = NAND_BUSWIDTH_16;
nand->waitfunc = dfc_wait;
nand->read_byte = dfc_read_byte;
- nand->write_byte = dfc_write_byte;
nand->read_word = dfc_read_word;
- nand->write_word = dfc_write_word;
nand->read_buf = dfc_read_buf;
nand->write_buf = dfc_write_buf;
nand->cmdfunc = dfc_cmdfunc;
- nand->autooob = &delta_oob;
+/* nand->autooob = &delta_oob; */
nand->badblock_pattern = &delta_bbt_descr;
return 0;
}
diff --git a/common/Makefile b/common/Makefile
index 4287108..ecf755f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -98,6 +98,7 @@
COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o
+COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o
COBJS-y += cmd_vfd.o
COBJS-y += command.o
COBJS-y += console.o
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index d7b2f53..a55ca41 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -14,6 +14,12 @@
#include <linux/mtd/nftl.h>
#include <linux/mtd/doc2000.h>
+/*
+ * ! BROKEN !
+ *
+ * TODO: must be implemented and tested by someone with HW
+ */
+#if 0
#ifdef CFG_DOC_SUPPORT_2000
#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
#else
@@ -1629,3 +1635,6 @@
puts ("No DiskOnChip found\n");
}
}
+#else
+void doc_probe(unsigned long physadr) {}
+#endif
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 9e38bf7..520c152 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -18,6 +18,7 @@
*
*/
#include <common.h>
+#include <linux/mtd/mtd.h>
#if defined(CONFIG_CMD_NAND)
@@ -34,48 +35,58 @@
int mtdparts_init(void);
int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
int find_dev_and_part(const char *id, struct mtd_device **dev,
- u8 *part_num, struct part_info **part);
+ u8 *part_num, struct part_info **part);
#endif
-static int nand_dump_oob(nand_info_t *nand, ulong off)
-{
- return 0;
-}
-
-static int nand_dump(nand_info_t *nand, ulong off)
+static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
{
int i;
- u_char *buf, *p;
+ u_char *datbuf, *oobbuf, *p;
- buf = malloc(nand->oobblock + nand->oobsize);
- if (!buf) {
+ datbuf = malloc(nand->writesize + nand->oobsize);
+ oobbuf = malloc(nand->oobsize);
+ if (!datbuf || !oobbuf) {
puts("No memory for page buffer\n");
return 1;
}
- off &= ~(nand->oobblock - 1);
- i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
+ off &= ~(nand->writesize - 1);
+ loff_t addr = (loff_t) off;
+ struct mtd_oob_ops ops;
+ memset(&ops, 0, sizeof(ops));
+ ops.datbuf = datbuf;
+ ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
+ ops.len = nand->writesize;
+ ops.ooblen = nand->oobsize;
+ ops.mode = MTD_OOB_RAW;
+ i = nand->read_oob(nand, addr, &ops);
if (i < 0) {
printf("Error (%d) reading page %08lx\n", i, off);
- free(buf);
+ free(datbuf);
+ free(oobbuf);
return 1;
}
printf("Page %08lx dump:\n", off);
- i = nand->oobblock >> 4; p = buf;
+ i = nand->writesize >> 4;
+ p = datbuf;
+
while (i--) {
- printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
- " %02x %02x %02x %02x %02x %02x %02x %02x\n",
- p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
- p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
+ if (!only_oob)
+ printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
+ p[8], p[9], p[10], p[11], p[12], p[13], p[14],
+ p[15]);
p += 16;
}
puts("OOB:\n");
i = nand->oobsize >> 3;
while (i--) {
- printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
- p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+ printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
p += 8;
}
- free(buf);
+ free(datbuf);
+ free(oobbuf);
return 0;
}
@@ -155,7 +166,7 @@
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- int i, dev, ret;
+ int i, dev, ret = 0;
ulong addr, off;
size_t size;
char *cmd, *s;
@@ -182,8 +193,8 @@
for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
printf("Device %d: %s, sector size %u KiB\n",
- i, nand_info[i].name,
- nand_info[i].erasesize >> 10);
+ i, nand_info[i].name,
+ nand_info[i].erasesize >> 10);
}
return 0;
}
@@ -196,7 +207,7 @@
puts("\nno devices available\n");
else
printf("\nDevice %d: %s\n", nand_curr_device,
- nand_info[nand_curr_device].name);
+ nand_info[nand_curr_device].name);
return 0;
}
dev = (int)simple_strtoul(argv[2], NULL, 10);
@@ -299,15 +310,14 @@
off = (int)simple_strtoul(argv[2], NULL, 16);
if (s != NULL && strcmp(s, ".oob") == 0)
- ret = nand_dump_oob(nand, off);
+ ret = nand_dump(nand, off, 1);
else
- ret = nand_dump(nand, off);
+ ret = nand_dump(nand, off, 0);
return ret == 0 ? 1 : 0;
}
- /* read write */
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
int read;
@@ -322,43 +332,29 @@
return 1;
s = strchr(cmd, '.');
- if (s != NULL &&
- (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) {
- if (read) {
- /* read */
- nand_read_options_t opts;
- memset(&opts, 0, sizeof(opts));
- opts.buffer = (u_char*) addr;
- opts.length = size;
- opts.offset = off;
- opts.quiet = quiet;
- ret = nand_read_opts(nand, &opts);
- } else {
- /* write */
- nand_write_options_t opts;
- memset(&opts, 0, sizeof(opts));
- opts.buffer = (u_char*) addr;
- opts.length = size;
- opts.offset = off;
- /* opts.forcejffs2 = 1; */
- opts.pad = 1;
- opts.blockalign = 1;
- opts.quiet = quiet;
- ret = nand_write_opts(nand, &opts);
- }
+ if (!s || !strcmp(s, ".jffs2") ||
+ !strcmp(s, ".e") || !strcmp(s, ".i")) {
+ if (read)
+ ret = nand_read_skip_bad(nand, off, &size,
+ (u_char *)addr);
+ else
+ ret = nand_write_skip_bad(nand, off, &size,
+ (u_char *)addr);
} else if (s != NULL && !strcmp(s, ".oob")) {
- /* read out-of-band data */
+ /* out-of-band data */
+ mtd_oob_ops_t ops = {
+ .oobbuf = (u8 *)addr,
+ .ooblen = size,
+ .mode = MTD_OOB_RAW
+ };
+
if (read)
- ret = nand->read_oob(nand, off, size, &size,
- (u_char *) addr);
+ ret = nand->read_oob(nand, off, &ops);
else
- ret = nand->write_oob(nand, off, size, &size,
- (u_char *) addr);
+ ret = nand->write_oob(nand, off, &ops);
} else {
- if (read)
- ret = nand_read(nand, off, &size, (u_char *)addr);
- else
- ret = nand_write(nand, off, &size, (u_char *)addr);
+ printf("Unknown nand command suffix '%s'.\n", s);
+ return 1;
}
printf(" %d bytes %s: %s\n", size,
@@ -381,6 +377,7 @@
}
return 1;
}
+
if (strcmp(cmd, "biterr") == 0) {
/* todo */
return 1;
@@ -395,7 +392,12 @@
if (!strcmp("status", argv[2]))
status = 1;
}
-
+/*
+ * ! BROKEN !
+ *
+ * TODO: must be implemented and tested by someone with HW
+ */
+#if 0
if (status) {
ulong block_start = 0;
ulong off;
@@ -406,28 +408,28 @@
nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
printf("device is %swrite protected\n",
(nand_chip->read_byte(nand) & 0x80 ?
- "NOT " : "" ) );
+ "NOT " : ""));
- for (off = 0; off < nand->size; off += nand->oobblock) {
+ for (off = 0; off < nand->size; off += nand->writesize) {
int s = nand_get_lock_status(nand, off);
/* print message only if status has changed
* or at end of chip
*/
- if (off == nand->size - nand->oobblock
+ if (off == nand->size - nand->writesize
|| (s != last_status && off != 0)) {
- printf("%08lx - %08lx: %8lu pages %s%s%s\n",
+ printf("%08lx - %08lx: %8d pages %s%s%s\n",
block_start,
off-1,
- (off-block_start)/nand->oobblock,
+ (off-block_start)/nand->writesize,
((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
}
last_status = s;
- }
+ }
} else {
if (!nand_lock(nand, tight)) {
puts("NAND flash successfully locked\n");
@@ -436,6 +438,7 @@
return 1;
}
}
+#endif
return 0;
}
@@ -443,6 +446,12 @@
if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
return 1;
+/*
+ * ! BROKEN !
+ *
+ * TODO: must be implemented and tested by someone with HW
+ */
+#if 0
if (!nand_unlock(nand, off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
@@ -450,6 +459,7 @@
"write and erase will probably fail\n");
return 1;
}
+#endif
return 0;
}
@@ -459,54 +469,47 @@
}
U_BOOT_CMD(nand, 5, 1, do_nand,
- "nand - NAND sub-system\n",
- "info - show available NAND devices\n"
- "nand device [dev] - show or set current device\n"
- "nand read[.jffs2] - addr off|partition size\n"
- "nand write[.jffs2] - addr off|partition size - read/write `size' bytes starting\n"
- " at offset `off' to/from memory address `addr'\n"
- "nand erase [clean] [off size] - erase `size' bytes from\n"
- " offset `off' (entire device if not specified)\n"
- "nand bad - show bad blocks\n"
- "nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
- "nand markbad off - mark bad block at offset (UNSAFE)\n"
- "nand biterr off - make a bit error at offset (UNSAFE)\n"
- "nand lock [tight] [status] - bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section\n");
+ "nand - NAND sub-system\n",
+ "info - show available NAND devices\n"
+ "nand device [dev] - show or set current device\n"
+ "nand read - addr off|partition size\n"
+ "nand write - addr off|partition size\n"
+ " read/write 'size' bytes starting at offset 'off'\n"
+ " to/from memory address 'addr', skipping bad blocks.\n"
+ "nand erase [clean] [off size] - erase 'size' bytes from\n"
+ " offset 'off' (entire device if not specified)\n"
+ "nand bad - show bad blocks\n"
+ "nand dump[.oob] off - dump page\n"
+ "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand markbad off - mark bad block at offset (UNSAFE)\n"
+ "nand biterr off - make a bit error at offset (UNSAFE)\n"
+ "nand lock [tight] [status]\n"
+ " bring nand to lock state or display locked pages\n"
+ "nand unlock [offset] [size] - unlock section\n");
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
- ulong offset, ulong addr, char *cmd)
+ ulong offset, ulong addr, char *cmd)
{
int r;
char *ep, *s;
size_t cnt;
image_header_t *hdr;
- int jffs2 = 0;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
s = strchr(cmd, '.');
if (s != NULL &&
- (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")))
- jffs2 = 1;
+ (strcmp(s, ".jffs2") && !strcmp(s, ".e") && !strcmp(s, ".i"))) {
+ printf("Unknown nand load suffix '%s'\n", s);
+ show_boot_progress(-53);
+ return 1;
+ }
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
- cnt = nand->oobblock;
- if (jffs2) {
- nand_read_options_t opts;
- memset(&opts, 0, sizeof(opts));
- opts.buffer = (u_char*) addr;
- opts.length = cnt;
- opts.offset = offset;
- opts.quiet = 1;
- r = nand_read_opts(nand, &opts);
- } else {
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
- }
-
+ cnt = nand->writesize;
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-56);
@@ -536,19 +539,10 @@
puts ("** Unknown image type\n");
return 1;
}
+ show_boot_progress (57);
- if (jffs2) {
- nand_read_options_t opts;
- memset(&opts, 0, sizeof(opts));
- opts.buffer = (u_char*) addr;
- opts.length = cnt;
- opts.offset = offset;
- opts.quiet = 1;
- r = nand_read_opts(nand, &opts);
- } else {
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
- }
-
+ /* FIXME: skip bad blocks */
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-58);
@@ -614,7 +608,7 @@
else
addr = CFG_LOAD_ADDR;
return nand_load_image(cmdtp, &nand_info[dev->id->num],
- part->offset, addr, argv[0]);
+ part->offset, addr, argv[0]);
}
}
#endif
@@ -669,7 +663,7 @@
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"nboot - boot from NAND device\n",
- "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n");
+ "[partition] | [[[loadAddr] dev] offset]\n");
#endif
@@ -726,10 +720,10 @@
#define CONFIG_MTD_NAND_ECC_JFFS2
/* bits for nand_legacy_rw() `cmd'; or together as needed */
-#define NANDRW_READ 0x01
-#define NANDRW_WRITE 0x00
-#define NANDRW_JFFS2 0x02
-#define NANDRW_JFFS2_SKIP 0x04
+#define NANDRW_READ 0x01
+#define NANDRW_WRITE 0x00
+#define NANDRW_JFFS2 0x02
+#define NANDRW_JFFS2_SKIP 0x04
/*
* Imports from nand_legacy.c
@@ -839,11 +833,11 @@
if (strncmp (argv[1], "read", 4) == 0 ||
strncmp (argv[1], "write", 5) == 0) {
- ulong addr = simple_strtoul (argv[2], NULL, 16);
- off_t off = simple_strtoul (argv[3], NULL, 16);
- size_t size = simple_strtoul (argv[4], NULL, 16);
- int cmd = (strncmp (argv[1], "read", 4) == 0) ?
- NANDRW_READ : NANDRW_WRITE;
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ off_t off = simple_strtoul (argv[3], NULL, 16);
+ size_t size = simple_strtoul (argv[4], NULL, 16);
+ int cmd = (strncmp (argv[1], "read", 4) == 0) ?
+ NANDRW_READ : NANDRW_WRITE;
size_t total;
int ret;
char *cmdtail = strchr (argv[1], '.');
@@ -892,8 +886,7 @@
ret = nand_legacy_rw (nand_dev_desc + curr_device,
cmd, off, size,
- &total,
- (u_char *) addr);
+ &total, (u_char *) addr);
printf (" %d bytes %s: %s\n", total,
(cmd & NANDRW_READ) ? "read" : "written",
@@ -1000,11 +993,11 @@
show_boot_progress (55);
printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
- dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
- offset);
+ dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
+ offset);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
- SECTORSIZE, NULL, (u_char *)addr)) {
+ SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
show_boot_progress (-56);
return 1;
@@ -1035,8 +1028,8 @@
show_boot_progress (57);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
- offset + SECTORSIZE, cnt, NULL,
- (u_char *)(addr+SECTORSIZE))) {
+ offset + SECTORSIZE, cnt, NULL,
+ (u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
show_boot_progress (-58);
return 1;
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index d6d3376..419bf70 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -38,7 +38,7 @@
onenand_init();
return 0;
}
- onenand_print_device_info(onenand_chip.device_id, 1);
+ printf("%s\n", onenand_mtd.name);
return 0;
default:
diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c
new file mode 100644
index 0000000..ac4a518
--- /dev/null
+++ b/common/cmd_yaffs2.c
@@ -0,0 +1,215 @@
+#include <common.h>
+
+#include <config.h>
+#include <command.h>
+
+#ifdef YAFFS2_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+extern void cmd_yaffs_mount(char *mp);
+extern void cmd_yaffs_umount(char *mp);
+extern void cmd_yaffs_read_file(char *fn);
+extern void cmd_yaffs_write_file(char *fn,char bval,int sizeOfFile);
+extern void cmd_yaffs_ls(const char *mountpt, int longlist);
+extern void cmd_yaffs_mwrite_file(char *fn, char *addr, int size);
+extern void cmd_yaffs_mread_file(char *fn, char *addr);
+extern void cmd_yaffs_mkdir(const char *dir);
+extern void cmd_yaffs_rmdir(const char *dir);
+extern void cmd_yaffs_rm(const char *path);
+extern void cmd_yaffs_mv(const char *oldPath, const char *newPath);
+
+extern int yaffs_DumpDevStruct(const char *path);
+
+
+int do_ymount (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *mtpoint = argv[1];
+ cmd_yaffs_mount(mtpoint);
+
+ return(0);
+}
+
+int do_yumount (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *mtpoint = argv[1];
+ cmd_yaffs_umount(mtpoint);
+
+ return(0);
+}
+
+int do_yls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *dirname = argv[argc-1];
+
+ cmd_yaffs_ls(dirname, (argc>2)?1:0);
+
+ return(0);
+}
+
+int do_yrd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *filename = argv[1];
+ printf ("Reading file %s ", filename);
+
+ cmd_yaffs_read_file(filename);
+
+ printf ("done\n");
+ return(0);
+}
+
+int do_ywr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *filename = argv[1];
+ ulong value = simple_strtoul(argv[2], NULL, 16);
+ ulong numValues = simple_strtoul(argv[3], NULL, 16);
+
+ printf ("Writing value (%x) %x times to %s... ", value, numValues, filename);
+
+ cmd_yaffs_write_file(filename,value,numValues);
+
+ printf ("done\n");
+ return(0);
+}
+
+int do_yrdm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *filename = argv[1];
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+
+ cmd_yaffs_mread_file(filename, (char *)addr);
+
+ return(0);
+}
+
+int do_ywrm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *filename = argv[1];
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong size = simple_strtoul(argv[3], NULL, 16);
+
+ cmd_yaffs_mwrite_file(filename, (char *)addr, size);
+
+ return(0);
+}
+
+int do_ymkdir (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *dirname = argv[1];
+
+ cmd_yaffs_mkdir(dirname);
+
+ return(0);
+}
+
+int do_yrmdir (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *dirname = argv[1];
+
+ cmd_yaffs_rmdir(dirname);
+
+ return(0);
+}
+
+int do_yrm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *path = argv[1];
+
+ cmd_yaffs_rm(path);
+
+ return(0);
+}
+
+int do_ymv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *oldPath = argv[1];
+ char *newPath = argv[2];
+
+ cmd_yaffs_mv(newPath, oldPath);
+
+ return(0);
+}
+
+int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *dirname = argv[1];
+ if (yaffs_DumpDevStruct(dirname) != 0)
+ printf("yaffs_DumpDevStruct returning error when dumping path: , %s\n", dirname);
+ return 0;
+}
+
+
+
+U_BOOT_CMD(
+ ymount, 3, 0, do_ymount,
+ "ymount\t- mount yaffs\n",
+ "\n"
+);
+
+U_BOOT_CMD(
+ yumount, 3, 0, do_yumount,
+ "yumount\t- unmount yaffs\n",
+ "\n"
+);
+
+U_BOOT_CMD(
+ yls, 4, 0, do_yls,
+ "yls\t- yaffs ls\n",
+ "[-l] name\n"
+);
+
+U_BOOT_CMD(
+ yrd, 2, 0, do_yrd,
+ "yrd\t- read file from yaffs\n",
+ "filename\n"
+);
+
+U_BOOT_CMD(
+ ywr, 4, 0, do_ywr,
+ "ywr\t- write file to yaffs\n",
+ "filename value num_vlues\n"
+);
+
+U_BOOT_CMD(
+ yrdm, 3, 0, do_yrdm,
+ "yrdm\t- read file to memory from yaffs\n",
+ "filename offset\n"
+);
+
+U_BOOT_CMD(
+ ywrm, 4, 0, do_ywrm,
+ "ywrm\t- write file from memory to yaffs\n",
+ "filename offset size\n"
+);
+
+U_BOOT_CMD(
+ ymkdir, 2, 0, do_ymkdir,
+ "ymkdir\t- YAFFS mkdir\n",
+ "dirname\n"
+);
+
+U_BOOT_CMD(
+ yrmdir, 2, 0, do_yrmdir,
+ "yrmdir\t- YAFFS rmdir\n",
+ "dirname\n"
+);
+
+U_BOOT_CMD(
+ yrm, 2, 0, do_yrm,
+ "yrm\t- YAFFS rm\n",
+ "path\n"
+);
+
+U_BOOT_CMD(
+ ymv, 4, 0, do_ymv,
+ "ymv\t- YAFFS mv\n",
+ "oldPath newPath\n"
+);
+
+U_BOOT_CMD(
+ ydump, 2, 0, do_ydump,
+ "ydump\t- YAFFS device struct\n",
+ "dirname\n"
+);
diff --git a/common/env_nand.c b/common/env_nand.c
index 104f085..a8f0de7 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -159,22 +159,23 @@
{
size_t end = offset + CFG_ENV_RANGE;
size_t amount_saved = 0;
- size_t blocksize;
+ size_t blocksize, len;
u_char *char_ptr;
blocksize = nand_info[0].erasesize;
+ len = min(blocksize, CFG_ENV_SIZE);
while (amount_saved < CFG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
offset += blocksize;
} else {
char_ptr = &buf[amount_saved];
- if (nand_write(&nand_info[0], offset, &blocksize,
+ if (nand_write(&nand_info[0], offset, &len,
char_ptr))
return 1;
offset += blocksize;
- amount_saved += blocksize;
+ amount_saved += len;
}
}
if (amount_saved != CFG_ENV_SIZE)
@@ -261,21 +262,22 @@
{
size_t end = offset + CFG_ENV_RANGE;
size_t amount_loaded = 0;
- size_t blocksize;
+ size_t blocksize, len;
u_char *char_ptr;
blocksize = nand_info[0].erasesize;
+ len = min(blocksize, CFG_ENV_SIZE);
while (amount_loaded < CFG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
offset += blocksize;
} else {
char_ptr = &buf[amount_loaded];
- if (nand_read(&nand_info[0], offset, &blocksize, char_ptr))
+ if (nand_read(&nand_info[0], offset, &len, char_ptr))
return 1;
offset += blocksize;
- amount_loaded += blocksize;
+ amount_loaded += len;
}
}
if (amount_loaded != CFG_ENV_SIZE)
@@ -345,12 +347,10 @@
void env_relocate_spec (void)
{
#if !defined(ENV_IS_EMBEDDED)
- size_t total;
int ret;
- total = CFG_ENV_SIZE;
ret = readenv(CFG_ENV_OFFSET, (u_char *) env_ptr);
- if (ret || total != CFG_ENV_SIZE)
+ if (ret)
return use_default();
if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
diff --git a/cpu/arm926ejs/at91sam9/Makefile b/cpu/arm926ejs/at91/Makefile
similarity index 100%
rename from cpu/arm926ejs/at91sam9/Makefile
rename to cpu/arm926ejs/at91/Makefile
diff --git a/cpu/arm926ejs/at91sam9/config.mk b/cpu/arm926ejs/at91/config.mk
similarity index 62%
rename from cpu/arm926ejs/at91sam9/config.mk
rename to cpu/arm926ejs/at91/config.mk
index 83040eb..31491a8 100644
--- a/cpu/arm926ejs/at91sam9/config.mk
+++ b/cpu/arm926ejs/at91/config.mk
@@ -1,3 +1,3 @@
PLATFORM_CPPFLAGS += -march=armv5te
PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
-LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91sam9/u-boot.lds
+LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91/u-boot.lds
diff --git a/cpu/arm926ejs/at91sam9/ether.c b/cpu/arm926ejs/at91/ether.c
similarity index 100%
rename from cpu/arm926ejs/at91sam9/ether.c
rename to cpu/arm926ejs/at91/ether.c
diff --git a/cpu/arm926ejs/at91sam9/lowlevel_init.S b/cpu/arm926ejs/at91/lowlevel_init.S
similarity index 100%
rename from cpu/arm926ejs/at91sam9/lowlevel_init.S
rename to cpu/arm926ejs/at91/lowlevel_init.S
diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91/spi.c
similarity index 100%
rename from cpu/arm926ejs/at91sam9/spi.c
rename to cpu/arm926ejs/at91/spi.c
diff --git a/cpu/arm926ejs/at91sam9/timer.c b/cpu/arm926ejs/at91/timer.c
similarity index 100%
rename from cpu/arm926ejs/at91sam9/timer.c
rename to cpu/arm926ejs/at91/timer.c
diff --git a/cpu/arm926ejs/at91sam9/u-boot.lds b/cpu/arm926ejs/at91/u-boot.lds
similarity index 100%
rename from cpu/arm926ejs/at91sam9/u-boot.lds
rename to cpu/arm926ejs/at91/u-boot.lds
diff --git a/cpu/arm926ejs/at91sam9/usb.c b/cpu/arm926ejs/at91/usb.c
similarity index 100%
rename from cpu/arm926ejs/at91sam9/usb.c
rename to cpu/arm926ejs/at91/usb.c
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 36468e6..8fd784e 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -42,6 +42,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#ifdef CFG_USE_NAND
#if !defined(CFG_NAND_LEGACY)
@@ -52,23 +53,23 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd)
+static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W;
IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_CLE )
IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
+ if ( ctrl & NAND_ALE )
IO_ADDR_W |= MASK_ALE;
- break;
+ this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *)IO_ADDR_W;
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
/* Set WP on deselect, write enable on select */
@@ -88,18 +89,27 @@
#ifdef CFG_NAND_HW_ECC
#ifdef CFG_NAND_LARGEPAGE
-static struct nand_oobinfo davinci_nand_oobinfo = {
+static struct nand_ecclayout davinci_nand_ecclayout = {
.useecc = MTD_NANDECC_AUTOPLACE,
.eccbytes = 12,
.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = { {2, 6}, {12, 12}, {28, 12}, {44, 12}, {60, 4} }
+ .oobfree = {
+ {.offset = 2, .length = 6},
+ {.offset = 12, .length = 12},
+ {.offset = 28, .length = 12},
+ {.offset = 44, .length = 12},
+ {.offset = 60, .length = 4}
+ }
};
#elif defined(CFG_NAND_SMALLPAGE)
-static struct nand_oobinfo davinci_nand_oobinfo = {
+static struct nand_ecclayout davinci_nand_ecclayout = {
.useecc = MTD_NANDECC_AUTOPLACE,
.eccbytes = 3,
.eccpos = {0, 1, 2},
- .oobfree = { {6, 2}, {8, 8} }
+ .oobfree = {
+ {.offset = 6, .length = 2},
+ {.offset = 8, .length = 8}
+ }
};
#else
#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
@@ -145,7 +155,7 @@
int region, n;
struct nand_chip *this = mtd->priv;
- n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+ n = (this->ecc.size/512);
region = 1;
while (n--) {
@@ -281,7 +291,7 @@
int block_count = 0, i, rc;
this = mtd->priv;
- block_count = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+ block_count = (this->ecc.size/512);
for (i = 0; i < block_count; i++) {
if (memcmp(read_ecc, calc_ecc, 3) != 0) {
rc = nand_davinci_compare_ecc(read_ecc, calc_ecc, dat);
@@ -306,7 +316,7 @@
return(emif_addr->NANDFSR & 0x1);
}
-static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
while(!nand_davinci_dev_ready(mtd)) {;}
*NAND_CE0CLE = NAND_STATUS;
@@ -362,22 +372,26 @@
#endif
#ifdef CFG_NAND_HW_ECC
#ifdef CFG_NAND_LARGEPAGE
- nand->eccmode = NAND_ECC_HW12_2048;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 2048;
+ nand->ecc.bytes = 12;
#elif defined(CFG_NAND_SMALLPAGE)
- nand->eccmode = NAND_ECC_HW3_512;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
#else
#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
#endif
- nand->autooob = &davinci_nand_oobinfo;
- nand->calculate_ecc = nand_davinci_calculate_ecc;
- nand->correct_data = nand_davinci_correct_data;
- nand->enable_hwecc = nand_davinci_enable_hwecc;
+ nand->ecc.layout = &davinci_nand_ecclayout;
+ nand->ecc.calculate = nand_davinci_calculate_ecc;
+ nand->ecc.correct = nand_davinci_correct_data;
+ nand->ecc.hwctl = nand_davinci_enable_hwecc;
#else
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#endif
/* Set address of hardware control function */
- nand->hwcontrol = nand_davinci_hwcontrol;
+ nand->cmd_ctrl = nand_davinci_hwcontrol;
nand->dev_ready = nand_davinci_dev_ready;
nand->waitfunc = nand_davinci_waitfunc;
diff --git a/cpu/mpc83xx/nand_init.c b/cpu/mpc83xx/nand_init.c
new file mode 100644
index 0000000..e92f230
--- /dev/null
+++ b/cpu/mpc83xx/nand_init.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ int i;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ for (i = 0; i < sizeof(gd_t); i++)
+ ((char *)gd)[i] = 0;
+
+ /* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+ /* Arbiter pipeline depth */
+ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
+ (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+ /* Arbiter repeat count */
+ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
+ (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_OPT
+ /* Optimize transactions between CSB and other devices */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
+ (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
+#endif
+
+ /* Enable Time Base & Decrimenter (so we will have udelay()) */
+ im->sysconf.spcr |= SPCR_TBEN;
+
+ /* DDR control driver register */
+#ifdef CFG_DDRCDR
+ im->sysconf.ddrcdr = CFG_DDRCDR;
+#endif
+ /* Output buffer impedance register */
+#ifdef CFG_OBIR
+ im->sysconf.obir = CFG_OBIR;
+#endif
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CFG_NAND_BR_PRELIM) \
+ && defined(CFG_NAND_OR_PRELIM) \
+ && defined(CFG_NAND_LBLAWBAR_PRELIM) \
+ && defined(CFG_NAND_LBLAWAR_PRELIM)
+ im->lbus.bank[0].br = CFG_NAND_BR_PRELIM;
+ im->lbus.bank[0].or = CFG_NAND_OR_PRELIM;
+ im->sysconf.lblaw[0].bar = CFG_NAND_LBLAWBAR_PRELIM;
+ im->sysconf.lblaw[0].ar = CFG_NAND_LBLAWAR_PRELIM;
+#else
+#error CFG_NAND_BR_PRELIM, CFG_NAND_OR_PRELIM, CFG_NAND_LBLAWBAR_PRELIM & CFG_NAND_LBLAWAR_PRELIM must be defined
+#endif
+}
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk(void)
+{
+ return (gd->bus_clk + 3L) / 4L;
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index c182174..16ed494 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -2,7 +2,7 @@
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved.
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -57,6 +57,10 @@
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
+#if !defined(CONFIG_NAND_SPL) && !defined(CFG_RAMBOOT)
+#define CFG_FLASHBOOT
+#endif
+
/*
* Set up GOT: Global Offset Table
*
@@ -64,16 +68,16 @@
*/
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
+ GOT_ENTRY(__bss_start)
+ GOT_ENTRY(_end)
+#ifndef CONFIG_NAND_SPL
+ GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
+#endif
END_GOT
/*
@@ -165,7 +169,7 @@
bl init_e300_core
-#ifndef CFG_RAMBOOT
+#ifdef CFG_FLASHBOOT
/* Inflate flash location so it appears everywhere, calculate */
/* the absolute address in final location of the FLASH, jump */
@@ -181,7 +185,7 @@
#if 1 /* Remapping flash with LAW0. */
bl remap_flash_by_law0
#endif
-#endif /* CFG_RAMBOOT */
+#endif /* CFG_FLASHBOOT */
/* setup the bats */
bl setup_bats
@@ -239,6 +243,7 @@
/* run 1st part of board init code (in Flash)*/
bl board_init_f
+#ifndef CONFIG_NAND_SPL
/*
* Vector Table
*/
@@ -428,6 +433,7 @@
lwz r1,GPR1(r1)
SYNC
rfi
+#endif /* !CONFIG_NAND_SPL */
/*
* This code initialises the E300 processor core
@@ -496,27 +502,146 @@
SYNC
mtspr HID2, r3
- /* clear all BAT's */
- /*----------------------------------*/
+ /* Done! */
+ /*------------------------------*/
+ blr
- xor r0, r0, r0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- SYNC
+ /* setup_bats - set them up to some initial state */
+ .globl setup_bats
+setup_bats:
+ addis r0, r0, 0x0000
+
+ /* IBAT 0 */
+ addis r4, r0, CFG_IBAT0L@h
+ ori r4, r4, CFG_IBAT0L@l
+ addis r3, r0, CFG_IBAT0U@h
+ ori r3, r3, CFG_IBAT0U@l
+ mtspr IBAT0L, r4
+ mtspr IBAT0U, r3
+
+ /* DBAT 0 */
+ addis r4, r0, CFG_DBAT0L@h
+ ori r4, r4, CFG_DBAT0L@l
+ addis r3, r0, CFG_DBAT0U@h
+ ori r3, r3, CFG_DBAT0U@l
+ mtspr DBAT0L, r4
+ mtspr DBAT0U, r3
+
+ /* IBAT 1 */
+ addis r4, r0, CFG_IBAT1L@h
+ ori r4, r4, CFG_IBAT1L@l
+ addis r3, r0, CFG_IBAT1U@h
+ ori r3, r3, CFG_IBAT1U@l
+ mtspr IBAT1L, r4
+ mtspr IBAT1U, r3
+
+ /* DBAT 1 */
+ addis r4, r0, CFG_DBAT1L@h
+ ori r4, r4, CFG_DBAT1L@l
+ addis r3, r0, CFG_DBAT1U@h
+ ori r3, r3, CFG_DBAT1U@l
+ mtspr DBAT1L, r4
+ mtspr DBAT1U, r3
+
+ /* IBAT 2 */
+ addis r4, r0, CFG_IBAT2L@h
+ ori r4, r4, CFG_IBAT2L@l
+ addis r3, r0, CFG_IBAT2U@h
+ ori r3, r3, CFG_IBAT2U@l
+ mtspr IBAT2L, r4
+ mtspr IBAT2U, r3
+
+ /* DBAT 2 */
+ addis r4, r0, CFG_DBAT2L@h
+ ori r4, r4, CFG_DBAT2L@l
+ addis r3, r0, CFG_DBAT2U@h
+ ori r3, r3, CFG_DBAT2U@l
+ mtspr DBAT2L, r4
+ mtspr DBAT2U, r3
+
+ /* IBAT 3 */
+ addis r4, r0, CFG_IBAT3L@h
+ ori r4, r4, CFG_IBAT3L@l
+ addis r3, r0, CFG_IBAT3U@h
+ ori r3, r3, CFG_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+
+ /* DBAT 3 */
+ addis r4, r0, CFG_DBAT3L@h
+ ori r4, r4, CFG_DBAT3L@l
+ addis r3, r0, CFG_DBAT3U@h
+ ori r3, r3, CFG_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+
+#ifdef CONFIG_HIGH_BATS
+ /* IBAT 4 */
+ addis r4, r0, CFG_IBAT4L@h
+ ori r4, r4, CFG_IBAT4L@l
+ addis r3, r0, CFG_IBAT4U@h
+ ori r3, r3, CFG_IBAT4U@l
+ mtspr IBAT4L, r4
+ mtspr IBAT4U, r3
+
+ /* DBAT 4 */
+ addis r4, r0, CFG_DBAT4L@h
+ ori r4, r4, CFG_DBAT4L@l
+ addis r3, r0, CFG_DBAT4U@h
+ ori r3, r3, CFG_DBAT4U@l
+ mtspr DBAT4L, r4
+ mtspr DBAT4U, r3
+
+ /* IBAT 5 */
+ addis r4, r0, CFG_IBAT5L@h
+ ori r4, r4, CFG_IBAT5L@l
+ addis r3, r0, CFG_IBAT5U@h
+ ori r3, r3, CFG_IBAT5U@l
+ mtspr IBAT5L, r4
+ mtspr IBAT5U, r3
+
+ /* DBAT 5 */
+ addis r4, r0, CFG_DBAT5L@h
+ ori r4, r4, CFG_DBAT5L@l
+ addis r3, r0, CFG_DBAT5U@h
+ ori r3, r3, CFG_DBAT5U@l
+ mtspr DBAT5L, r4
+ mtspr DBAT5U, r3
+
+ /* IBAT 6 */
+ addis r4, r0, CFG_IBAT6L@h
+ ori r4, r4, CFG_IBAT6L@l
+ addis r3, r0, CFG_IBAT6U@h
+ ori r3, r3, CFG_IBAT6U@l
+ mtspr IBAT6L, r4
+ mtspr IBAT6U, r3
+
+ /* DBAT 6 */
+ addis r4, r0, CFG_DBAT6L@h
+ ori r4, r4, CFG_DBAT6L@l
+ addis r3, r0, CFG_DBAT6U@h
+ ori r3, r3, CFG_DBAT6U@l
+ mtspr DBAT6L, r4
+ mtspr DBAT6U, r3
+
+ /* IBAT 7 */
+ addis r4, r0, CFG_IBAT7L@h
+ ori r4, r4, CFG_IBAT7L@l
+ addis r3, r0, CFG_IBAT7U@h
+ ori r3, r3, CFG_IBAT7U@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+
+ /* DBAT 7 */
+ addis r4, r0, CFG_DBAT7L@h
+ ori r4, r4, CFG_DBAT7L@l
+ addis r3, r0, CFG_DBAT7U@h
+ ori r3, r3, CFG_DBAT7U@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+#endif
+
+ isync
/* invalidate all tlb's
*
@@ -537,202 +662,6 @@
* based on code in "flush_tlbs" from arch/ppc/kernel/head.S
*
*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*------------------------------*/
- blr
-
- .globl invalidate_bats
-invalidate_bats:
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-#endif
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-#endif
- isync
- sync
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CFG_IBAT0L@h
- ori r4, r4, CFG_IBAT0L@l
- addis r3, r0, CFG_IBAT0U@h
- ori r3, r3, CFG_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- /* DBAT 0 */
- addis r4, r0, CFG_DBAT0L@h
- ori r4, r4, CFG_DBAT0L@l
- addis r3, r0, CFG_DBAT0U@h
- ori r3, r3, CFG_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- /* IBAT 1 */
- addis r4, r0, CFG_IBAT1L@h
- ori r4, r4, CFG_IBAT1L@l
- addis r3, r0, CFG_IBAT1U@h
- ori r3, r3, CFG_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- /* DBAT 1 */
- addis r4, r0, CFG_DBAT1L@h
- ori r4, r4, CFG_DBAT1L@l
- addis r3, r0, CFG_DBAT1U@h
- ori r3, r3, CFG_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- /* IBAT 2 */
- addis r4, r0, CFG_IBAT2L@h
- ori r4, r4, CFG_IBAT2L@l
- addis r3, r0, CFG_IBAT2U@h
- ori r3, r3, CFG_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- /* DBAT 2 */
- addis r4, r0, CFG_DBAT2L@h
- ori r4, r4, CFG_DBAT2L@l
- addis r3, r0, CFG_DBAT2U@h
- ori r3, r3, CFG_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- /* IBAT 3 */
- addis r4, r0, CFG_IBAT3L@h
- ori r4, r4, CFG_IBAT3L@l
- addis r3, r0, CFG_IBAT3U@h
- ori r3, r3, CFG_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- addis r4, r0, CFG_DBAT3L@h
- ori r4, r4, CFG_DBAT3L@l
- addis r3, r0, CFG_DBAT3U@h
- ori r3, r3, CFG_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CFG_IBAT4L@h
- ori r4, r4, CFG_IBAT4L@l
- addis r3, r0, CFG_IBAT4U@h
- ori r3, r3, CFG_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
- isync
-
- /* DBAT 4 */
- addis r4, r0, CFG_DBAT4L@h
- ori r4, r4, CFG_DBAT4L@l
- addis r3, r0, CFG_DBAT4U@h
- ori r3, r3, CFG_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
- isync
-
- /* IBAT 5 */
- addis r4, r0, CFG_IBAT5L@h
- ori r4, r4, CFG_IBAT5L@l
- addis r3, r0, CFG_IBAT5U@h
- ori r3, r3, CFG_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- addis r4, r0, CFG_DBAT5L@h
- ori r4, r4, CFG_DBAT5L@l
- addis r3, r0, CFG_DBAT5U@h
- ori r3, r3, CFG_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- addis r4, r0, CFG_IBAT6L@h
- ori r4, r4, CFG_IBAT6L@l
- addis r3, r0, CFG_IBAT6U@h
- ori r3, r3, CFG_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- addis r4, r0, CFG_DBAT6L@h
- ori r4, r4, CFG_DBAT6L@l
- addis r3, r0, CFG_DBAT6U@h
- ori r3, r3, CFG_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
- /* IBAT 7 */
- addis r4, r0, CFG_IBAT7L@h
- ori r4, r4, CFG_IBAT7L@l
- addis r3, r0, CFG_IBAT7U@h
- ori r3, r3, CFG_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- addis r4, r0, CFG_DBAT7L@h
- ori r4, r4, CFG_DBAT7L@l
- addis r3, r0, CFG_DBAT7U@h
- ori r3, r3, CFG_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
-
- /* Invalidate TLBs.
- * -> for (val = 0; val < 0x20000; val+=0x1000)
- * -> tlbie(val);
- */
lis r3, 0
lis r5, 2
@@ -874,7 +803,7 @@
mr r3, r5 /* Destination Address */
lis r4, CFG_MONITOR_BASE@h /* Source Address */
ori r4, r4, CFG_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
+ lwz r5, GOT(__bss_start)
sub r5, r5, r4
li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
@@ -987,6 +916,7 @@
stw r0,0(r3)
bdnz 1b
+#ifndef CONFIG_NAND_SPL
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
@@ -1004,6 +934,8 @@
stw r0,0(r4)
bdnz 3b
4:
+#endif
+
clear_bss:
/*
* Now clear BSS segment
@@ -1037,6 +969,7 @@
mr r4, r10 /* Destination Address */
bl board_init_r
+#ifndef CONFIG_NAND_SPL
/*
* Copy exception vector code to low memory
*
@@ -1119,6 +1052,7 @@
stw r0, 4(r7)
blr
+#endif /* !CONFIG_NAND_SPL */
#ifdef CFG_INIT_RAM_LOCK
lock_ram_in_cache:
@@ -1142,6 +1076,7 @@
sync
blr
+#ifndef CONFIG_NAND_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
@@ -1165,8 +1100,10 @@
mtspr HID0, r3 /* no invalidate, unlock */
sync
blr
-#endif
+#endif /* !CONFIG_NAND_SPL */
+#endif /* CFG_INIT_RAM_LOCK */
+#ifdef CFG_FLASHBOOT
map_flash_by_law1:
/* When booting from ROM (Flash or EPROM), clear the */
/* Address Mask in OR0 so ROM appears everywhere */
@@ -1245,3 +1182,4 @@
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
blr
+#endif /* CFG_FLASHBOOT */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 5b2ae88..4f083d9 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -44,65 +44,39 @@
#include <asm/io.h>
#include <ppc4xx.h>
-static u8 hwctl = 0;
+/*
+ * We need to store the info, which chip-select (CS) is used for the
+ * chip number. For example on Sequoia NAND chip #0 uses
+ * CS #3.
+ */
+static int ndfc_cs[NDFC_MAX_BANKS];
-static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- hwctl |= 0x1;
- break;
+ struct nand_chip *this = mtd->priv;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
- case NAND_CTL_CLRCLE:
- hwctl &= ~0x1;
- break;
+ if (cmd == NAND_CMD_NONE)
+ return;
- case NAND_CTL_SETALE:
- hwctl |= 0x2;
- break;
-
- case NAND_CTL_CLRALE:
- hwctl &= ~0x2;
- break;
- }
-}
-
-static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
- if (hwctl & 0x1)
- out_8((u8 *)(base + NDFC_CMD), byte);
- else if (hwctl & 0x2)
- out_8((u8 *)(base + NDFC_ALE), byte);
+ if (ctrl & NAND_CLE)
+ out_8((u8 *)(base + NDFC_CMD), cmd & 0xFF);
else
- out_8((u8 *)(base + NDFC_DATA), byte);
-}
-
-static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
- return (in_8((u8 *)(base + NDFC_DATA)));
+ out_8((u8 *)(base + NDFC_ALE), cmd & 0xFF);
}
static int ndfc_dev_ready(struct mtd_info *mtdinfo)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
- while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY))
- ;
-
- return 1;
+ return (in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY);
}
static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
u32 ccr;
ccr = in_be32((u32 *)(base + NDFC_CCR));
@@ -114,7 +88,7 @@
const u_char *dat, u_char *ecc_code)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
u32 ecc;
u8 *p = (u8 *)&ecc;
@@ -139,7 +113,7 @@
static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (;len > 0; len -= 4)
@@ -154,7 +128,7 @@
static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
@@ -164,7 +138,7 @@
static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
@@ -181,29 +155,43 @@
* Don't use "chip" to address the NAND device,
* generate the cs from the address where it is encoded.
*/
- int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
- ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+ int cs = ndfc_cs[chip];
/* Set NandFlash Core Configuration Register */
/* 1 col x 2 rows */
out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
+ out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
}
int board_nand_init(struct nand_chip *nand)
{
int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
- ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+ ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+ static int chip = 0;
- nand->hwcontrol = ndfc_hwcontrol;
- nand->read_byte = ndfc_read_byte;
- nand->read_buf = ndfc_read_buf;
- nand->write_byte = ndfc_write_byte;
- nand->dev_ready = ndfc_dev_ready;
+ /*
+ * Save chip-select for this chip #
+ */
+ ndfc_cs[chip] = cs;
- nand->eccmode = NAND_ECC_HW3_256;
- nand->enable_hwecc = ndfc_enable_hwecc;
- nand->calculate_ecc = ndfc_calculate_ecc;
- nand->correct_data = nand_correct_data;
+ /*
+ * Select required NAND chip in NDFC
+ */
+ board_nand_select_device(nand, chip);
+
+ nand->IO_ADDR_R = (void __iomem *)(base + NDFC_DATA);
+ nand->IO_ADDR_W = (void __iomem *)(base + NDFC_DATA);
+ nand->cmd_ctrl = ndfc_hwcontrol;
+ nand->chip_delay = 50;
+ nand->read_buf = ndfc_read_buf;
+ nand->dev_ready = ndfc_dev_ready;
+ nand->ecc.correct = nand_correct_data;
+ nand->ecc.hwctl = ndfc_enable_hwecc;
+ nand->ecc.calculate = ndfc_calculate_ecc;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 256;
+ nand->ecc.bytes = 3;
#ifndef CONFIG_NAND_SPL
nand->write_buf = ndfc_write_buf;
@@ -218,11 +206,7 @@
mtebc(pb0ap, CFG_EBC_PB0AP);
#endif
- /*
- * Select required NAND chip in NDFC
- */
- board_nand_select_device(nand, cs);
- out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
+ chip++;
return 0;
}
diff --git a/doc/README.nand b/doc/README.nand
index 647a6b8..0ad5e18 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -57,14 +57,9 @@
Print information about all of the NAND devices found.
nand read addr ofs|partition size
- Read `size' bytes from `ofs' in NAND flash to `addr'. If a page
- cannot be read because it is marked bad or an uncorrectable data
- error is found the command stops with an error.
-
- nand read.jffs2 addr ofs|partition size
- Like `read', but the data for blocks that are marked bad is read as
- 0xff. This gives a readable JFFS2 image that can be processed by
- the JFFS2 commands such as ls and fsload.
+ Read `size' bytes from `ofs' in NAND flash to `addr'. Blocks that
+ are marked bad are skipped. If a page cannot be read because an
+ uncorrectable data error is found, the command stops with an error.
nand read.oob addr ofs|partition size
Read `size' bytes from the out-of-band data area corresponding to
@@ -73,17 +68,15 @@
for bad blocks or ECC errors.
nand write addr ofs|partition size
- Write `size' bytes from `addr' to `ofs' in NAND flash. If a page
- cannot be written because it is marked bad or the write fails the
- command stops with an error.
+ Write `size' bytes from `addr' to `ofs' in NAND flash. Blocks that
+ are marked bad are skipped. If a page cannot be read because an
+ uncorrectable data error is found, the command stops with an error.
- nand write.jffs2 addr ofs|partition size
- Like `write', but blocks that are marked bad are skipped and the
- data is written to the next block instead. This allows writing
- a JFFS2 image, as long as the image is short enough to fit even
- after skipping the bad blocks. Compact images, such as those
- produced by mkfs.jffs2 should work well, but loading an image copied
- from another flash is going to be trouble if there are any bad blocks.
+ As JFFS2 skips blocks similarly, this allows writing a JFFS2 image,
+ as long as the image is short enough to fit even after skipping the
+ bad blocks. Compact images, such as those produced by mkfs.jffs2
+ should work well, but loading an image copied from another flash is
+ going to be trouble if there are any bad blocks.
nand write.oob addr ofs|partition size
Write `size' bytes from `addr' to the out-of-band data area
@@ -215,12 +208,6 @@
using both the new code which is able to skip bad blocks
"nand erase clean" additionally writes JFFS2-cleanmarkers in the oob.
- "nand write.jffs2"
- like "nand write" but skip found bad eraseblocks
-
- "nand read.jffs2"
- like "nand read" but skip found bad eraseblocks
-
Miscellaneous and testing commands:
"markbad [offset]"
create an artificial bad block (for testing bad block handling)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 7bd22a0..ffb3169 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -32,6 +32,7 @@
COBJS-y += nand_bbt.o
COBJS-y += nand_util.o
+COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-y += fsl_upm.o
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index fdd85c1..ce197f5 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -16,7 +16,7 @@
*
* Interface to generic NAND code for M-Systems DiskOnChip devices
*
- * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
+ * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
*/
#include <common.h>
@@ -39,13 +39,13 @@
#include <linux/mtd/inftl.h>
/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS
-#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0
+#ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+#define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0
#endif
static unsigned long __initdata doc_locations[] = {
#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
-#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH
0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
@@ -65,7 +65,7 @@
0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
0xff000000,
-##else
+#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0xffffffff };
@@ -77,7 +77,7 @@
unsigned long physadr;
u_char ChipID;
u_char CDSNControl;
- int chips_per_floor; /* The number of chips detected on each floor */
+ int chips_per_floor; /* The number of chips detected on each floor */
int curfloor;
int curchip;
int mh0_page;
@@ -85,14 +85,10 @@
struct mtd_info *nextdoc;
};
-/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL
- MediaHeader. The spec says to just keep going, I think, but that's just
- silly. */
-#define MAX_MEDIAHEADER_SCAN 8
-
/* This is the syndrome computed by the HW ecc generator upon reading an empty
page, one with all 0xff for data and stored ecc code. */
static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
+
/* This is the ecc value computed by the HW ecc generator upon writing an empty
page, one with all 0xff for data. */
static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
@@ -103,35 +99,36 @@
#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil)
#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k)
-static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd);
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int bitmask);
static void doc200x_select_chip(struct mtd_info *mtd, int chip);
-static int debug=0;
+static int debug = 0;
module_param(debug, int, 0);
-static int try_dword=1;
+static int try_dword = 1;
module_param(try_dword, int, 0);
-static int no_ecc_failures=0;
+static int no_ecc_failures = 0;
module_param(no_ecc_failures, int, 0);
-#ifdef CONFIG_MTD_PARTITIONS
-static int no_autopart=0;
+static int no_autopart = 0;
module_param(no_autopart, int, 0);
-#endif
-#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
-static int inftl_bbt_write=1;
+static int show_firmware_partition = 0;
+module_param(show_firmware_partition, int, 0);
+
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE
+static int inftl_bbt_write = 1;
#else
-static int inftl_bbt_write=0;
+static int inftl_bbt_write = 0;
#endif
module_param(inftl_bbt_write, int, 0);
-static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS;
+static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS;
module_param(doc_config_location, ulong, 0);
MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
-
/* Sector size for HW ECC */
#define SECTOR_SIZE 512
/* The sector bytes are packed into NB_DATA 10 bit words */
@@ -155,7 +152,7 @@
* some comments, improved a minor bit and converted it to make use
* of the generic Reed-Solomon libary. tglx
*/
-static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
+static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
{
int i, j, nerr, errpos[8];
uint8_t parity;
@@ -176,11 +173,11 @@
* s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
* where x = alpha^(FCR + i)
*/
- for(j = 1; j < NROOTS; j++) {
- if(ds[j] == 0)
+ for (j = 1; j < NROOTS; j++) {
+ if (ds[j] == 0)
continue;
tmp = rs->index_of[ds[j]];
- for(i = 0; i < NROOTS; i++)
+ for (i = 0; i < NROOTS; i++)
s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
}
@@ -201,7 +198,7 @@
* but they are given by the design of the de/encoder circuit
* in the DoC ASIC's.
*/
- for(i = 0;i < nerr; i++) {
+ for (i = 0; i < nerr; i++) {
int index, bitpos, pos = 1015 - errpos[i];
uint8_t val;
if (pos >= NB_DATA && pos < 1019)
@@ -213,8 +210,7 @@
can be modified since pos is even */
index = (pos >> 3) ^ 1;
bitpos = pos & 7;
- if ((index >= 0 && index < SECTOR_SIZE) ||
- index == (SECTOR_SIZE + 1)) {
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
val = (uint8_t) (errval[i] >> (2 + bitpos));
parity ^= val;
if (index < SECTOR_SIZE)
@@ -224,9 +220,8 @@
bitpos = (bitpos + 10) & 7;
if (bitpos == 0)
bitpos = 8;
- if ((index >= 0 && index < SECTOR_SIZE) ||
- index == (SECTOR_SIZE + 1)) {
- val = (uint8_t)(errval[i] << (8 - bitpos));
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
+ val = (uint8_t) (errval[i] << (8 - bitpos));
parity ^= val;
if (index < SECTOR_SIZE)
data[index] ^= val;
@@ -261,7 +256,8 @@
void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
- if(debug) printk("_DoC_WaitReady...\n");
+ if (debug)
+ printk("_DoC_WaitReady...\n");
/* Out-of-line routine to wait for chip response */
if (DoC_is_MillenniumPlus(doc)) {
while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
@@ -306,7 +302,8 @@
DoC_Delay(doc, 2);
}
- if(debug) printk("DoC_WaitReady OK\n");
+ if (debug)
+ printk("DoC_WaitReady OK\n");
return ret;
}
@@ -316,7 +313,8 @@
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
- if(debug)printk("write_byte %02x\n", datum);
+ if (debug)
+ printk("write_byte %02x\n", datum);
WriteDOC(datum, docptr, CDSNSlowIO);
WriteDOC(datum, docptr, 2k_CDSN_IO);
}
@@ -331,37 +329,39 @@
ReadDOC(docptr, CDSNSlowIO);
DoC_Delay(doc, 2);
ret = ReadDOC(docptr, 2k_CDSN_IO);
- if (debug) printk("read_byte returns %02x\n", ret);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
return ret;
}
-static void doc2000_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2000_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("writebuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
- if (debug) printk("\n");
+ if (debug)
+ printk("\n");
}
-static void doc2000_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2000_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("readbuf of %d bytes: ", len);
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ for (i = 0; i < len; i++) {
buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i);
}
}
@@ -374,28 +374,28 @@
void __iomem *docptr = doc->virtadr;
int i;
- if (debug) printk("readbuf_dword of %d bytes: ", len);
+ if (debug)
+ printk("readbuf_dword of %d bytes: ", len);
- if (unlikely((((unsigned long)buf)|len) & 3)) {
- for (i=0; i < len; i++) {
- *(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
+ if (unlikely((((unsigned long)buf) | len) & 3)) {
+ for (i = 0; i < len; i++) {
+ *(uint8_t *) (&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
}
} else {
- for (i=0; i < len; i+=4) {
- *(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
+ for (i = 0; i < len; i += 4) {
+ *(uint32_t*) (&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
}
}
}
-static int doc2000_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2000_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- for (i=0; i < len; i++)
+ for (i = 0; i < len; i++)
if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO))
return -EFAULT;
return 0;
@@ -408,12 +408,15 @@
uint16_t ret;
doc200x_select_chip(mtd, nr);
- doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_READID);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
- doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
- this->write_byte(mtd, 0);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /* We cant' use dev_ready here, but at least we wait for the
+ * command to complete
+ */
+ udelay(50);
ret = this->read_byte(mtd) << 8;
ret |= this->read_byte(mtd);
@@ -426,12 +429,13 @@
} ident;
void __iomem *docptr = doc->virtadr;
- doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
- doc2000_write_byte(mtd, NAND_CMD_READID);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
- doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
- doc2000_write_byte(mtd, 0);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ udelay(50);
ident.dword = readl(docptr + DoC_2k_CDSN_IO);
if (((ident.byte[0] << 8) | ident.byte[1]) == ret) {
@@ -465,7 +469,7 @@
printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
}
-static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this)
{
struct doc_priv *doc = this->priv;
@@ -504,22 +508,20 @@
return ReadDOC(docptr, LastDataRead);
}
-static void doc2001_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2001_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- for (i=0; i < len; i++)
+ for (i = 0; i < len; i++)
WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
/* Terminate write pipeline */
WriteDOC(0x00, docptr, WritePipeTerm);
}
-static void doc2001_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -529,15 +531,14 @@
/* Start read pipeline */
ReadDOC(docptr, ReadPipeInit);
- for (i=0; i < len-1; i++)
+ for (i = 0; i < len - 1; i++)
buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
/* Terminate read pipeline */
buf[i] = ReadDOC(docptr, LastDataRead);
}
-static int doc2001_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2001_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -547,7 +548,7 @@
/* Start read pipeline */
ReadDOC(docptr, ReadPipeInit);
- for (i=0; i < len-1; i++)
+ for (i = 0; i < len - 1; i++)
if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
ReadDOC(docptr, LastDataRead);
return i;
@@ -567,81 +568,84 @@
ReadDOC(docptr, Mplus_ReadPipeInit);
ReadDOC(docptr, Mplus_ReadPipeInit);
ret = ReadDOC(docptr, Mplus_LastDataRead);
- if (debug) printk("read_byte returns %02x\n", ret);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
return ret;
}
-static void doc2001plus_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2001plus_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("writebuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
- if (debug) printk("\n");
+ if (debug)
+ printk("\n");
}
-static void doc2001plus_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("readbuf of %d bytes: ", len);
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
/* Start read pipeline */
ReadDOC(docptr, Mplus_ReadPipeInit);
ReadDOC(docptr, Mplus_ReadPipeInit);
- for (i=0; i < len-2; i++) {
+ for (i = 0; i < len - 2; i++) {
buf[i] = ReadDOC(docptr, Mil_CDSN_IO);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
/* Terminate read pipeline */
- buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead);
+ buf[len - 2] = ReadDOC(docptr, Mplus_LastDataRead);
if (debug && i < 16)
- printk("%02x ", buf[len-2]);
- buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead);
+ printk("%02x ", buf[len - 2]);
+ buf[len - 1] = ReadDOC(docptr, Mplus_LastDataRead);
if (debug && i < 16)
- printk("%02x ", buf[len-1]);
- if (debug) printk("\n");
+ printk("%02x ", buf[len - 1]);
+ if (debug)
+ printk("\n");
}
-static int doc2001plus_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2001plus_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("verifybuf of %d bytes: ", len);
+ if (debug)
+ printk("verifybuf of %d bytes: ", len);
/* Start read pipeline */
ReadDOC(docptr, Mplus_ReadPipeInit);
ReadDOC(docptr, Mplus_ReadPipeInit);
- for (i=0; i < len-2; i++)
+ for (i = 0; i < len - 2; i++)
if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
ReadDOC(docptr, Mplus_LastDataRead);
ReadDOC(docptr, Mplus_LastDataRead);
return i;
}
- if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead))
- return len-2;
- if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead))
- return len-1;
+ if (buf[len - 2] != ReadDOC(docptr, Mplus_LastDataRead))
+ return len - 2;
+ if (buf[len - 1] != ReadDOC(docptr, Mplus_LastDataRead))
+ return len - 1;
return 0;
}
@@ -652,7 +656,8 @@
void __iomem *docptr = doc->virtadr;
int floor = 0;
- if(debug)printk("select chip (%d)\n", chip);
+ if (debug)
+ printk("select chip (%d)\n", chip);
if (chip == -1) {
/* Disable flash internally */
@@ -661,7 +666,7 @@
}
floor = chip / doc->chips_per_floor;
- chip -= (floor * doc->chips_per_floor);
+ chip -= (floor * doc->chips_per_floor);
/* Assert ChipEnable and deassert WriteProtect */
WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect);
@@ -678,65 +683,54 @@
void __iomem *docptr = doc->virtadr;
int floor = 0;
- if(debug)printk("select chip (%d)\n", chip);
+ if (debug)
+ printk("select chip (%d)\n", chip);
if (chip == -1)
return;
floor = chip / doc->chips_per_floor;
- chip -= (floor * doc->chips_per_floor);
+ chip -= (floor * doc->chips_per_floor);
/* 11.4.4 -- deassert CE before changing chip */
- doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
WriteDOC(floor, docptr, FloorSelect);
WriteDOC(chip, docptr, CDSNDeviceSelect);
- doc200x_hwcontrol(mtd, NAND_CTL_SETNCE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
doc->curchip = chip;
doc->curfloor = floor;
}
-static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd)
+#define CDSN_CTRL_MSK (CDSN_CTRL_CE | CDSN_CTRL_CLE | CDSN_CTRL_ALE)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
- switch(cmd) {
- case NAND_CTL_SETNCE:
- doc->CDSNControl |= CDSN_CTRL_CE;
- break;
- case NAND_CTL_CLRNCE:
- doc->CDSNControl &= ~CDSN_CTRL_CE;
- break;
- case NAND_CTL_SETCLE:
- doc->CDSNControl |= CDSN_CTRL_CLE;
- break;
- case NAND_CTL_CLRCLE:
- doc->CDSNControl &= ~CDSN_CTRL_CLE;
- break;
- case NAND_CTL_SETALE:
- doc->CDSNControl |= CDSN_CTRL_ALE;
- break;
- case NAND_CTL_CLRALE:
- doc->CDSNControl &= ~CDSN_CTRL_ALE;
- break;
- case NAND_CTL_SETWP:
- doc->CDSNControl |= CDSN_CTRL_WP;
- break;
- case NAND_CTL_CLRWP:
- doc->CDSNControl &= ~CDSN_CTRL_WP;
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ doc->CDSNControl &= ~CDSN_CTRL_MSK;
+ doc->CDSNControl |= ctrl & CDSN_CTRL_MSK;
+ if (debug)
+ printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
+ WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+ /* 11.4.3 -- 4 NOPs after CSDNControl write */
+ DoC_Delay(doc, 4);
}
- if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
- WriteDOC(doc->CDSNControl, docptr, CDSNControl);
- /* 11.4.3 -- 4 NOPs after CSDNControl write */
- DoC_Delay(doc, 4);
+ if (cmd != NAND_CMD_NONE) {
+ if (DoC_is_2000(doc))
+ doc2000_write_byte(mtd, cmd);
+ else
+ doc2001_write_byte(mtd, cmd);
+ }
}
-static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -757,9 +751,9 @@
if (command == NAND_CMD_SEQIN) {
int readcmd;
- if (column >= mtd->oobblock) {
+ if (column >= mtd->writesize) {
/* OOB area */
- column -= mtd->oobblock;
+ column -= mtd->writesize;
readcmd = NAND_CMD_READOOB;
} else if (column < 256) {
/* First 256 bytes --> READ0 */
@@ -783,25 +777,26 @@
WriteDOC(column, docptr, Mplus_FlashAddress);
}
if (page_addr != -1) {
- WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress);
- WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
/* One more address cycle for higher density devices */
if (this->chipsize & 0x0c000000) {
- WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
printk("high density\n");
}
}
WriteDOC(0, docptr, Mplus_WritePipeTerm);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
/* deassert ALE */
- if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID)
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_READID)
WriteDOC(0, docptr, Mplus_FlashControl);
}
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_PAGEPROG:
@@ -818,26 +813,26 @@
WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
- while ( !(this->read_byte(mtd) & 0x40));
+ while (!(this->read_byte(mtd) & 0x40)) ;
return;
- /* This applies to read commands */
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
+ */
if (!this->dev_ready) {
- udelay (this->chip_delay);
+ udelay(this->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
/* wait until command is processed */
- while (!this->dev_ready(mtd));
+ while (!this->dev_ready(mtd)) ;
}
static int doc200x_dev_ready(struct mtd_info *mtd)
@@ -850,23 +845,25 @@
/* 11.4.2 -- must NOP four times before checking FR/B# */
DoC_Delay(doc, 4);
if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
- if(debug)
+ if (debug)
printk("not ready\n");
return 0;
}
- if (debug)printk("was ready\n");
+ if (debug)
+ printk("was ready\n");
return 1;
} else {
/* 11.4.2 -- must NOP four times before checking FR/B# */
DoC_Delay(doc, 4);
if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
- if(debug)
+ if (debug)
printk("not ready\n");
return 0;
}
/* 11.4.2 -- Must NOP twice if it's ready */
DoC_Delay(doc, 2);
- if (debug)printk("was ready\n");
+ if (debug)
+ printk("was ready\n");
return 1;
}
}
@@ -885,7 +882,7 @@
void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
- switch(mode) {
+ switch (mode) {
case NAND_ECC_READ:
WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
WriteDOC(DOC_ECC_EN, docptr, ECCConf);
@@ -904,7 +901,7 @@
void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
- switch(mode) {
+ switch (mode) {
case NAND_ECC_READ:
WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
@@ -917,8 +914,7 @@
}
/* This code is only called on write */
-static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
- unsigned char *ecc_code)
+static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -962,7 +958,8 @@
often. It could be optimized away by examining the data in
the writebuf routine, and remembering the result. */
for (i = 0; i < 512; i++) {
- if (dat[i] == 0xff) continue;
+ if (dat[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
@@ -970,17 +967,20 @@
/* If emptymatch still =1, we do have an all-0xff data buffer.
Return all-0xff ecc value instead of the computed one, so
it'll look just like a freshly-erased page. */
- if (emptymatch) memset(ecc_code, 0xff, 6);
+ if (emptymatch)
+ memset(ecc_code, 0xff, 6);
#endif
return 0;
}
-static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *isnull)
{
int i, ret = 0;
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
+ uint8_t calc_ecc[6];
volatile u_char dummy;
int emptymatch = 1;
@@ -1013,18 +1013,20 @@
all-0xff data and stored ecc block. Check the stored ecc. */
if (emptymatch) {
for (i = 0; i < 6; i++) {
- if (read_ecc[i] == 0xff) continue;
+ if (read_ecc[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
}
/* If emptymatch still =1, check the data block. */
if (emptymatch) {
- /* Note: this somewhat expensive test should not be triggered
- often. It could be optimized away by examining the data in
- the readbuf routine, and remembering the result. */
+ /* Note: this somewhat expensive test should not be triggered
+ often. It could be optimized away by examining the data in
+ the readbuf routine, and remembering the result. */
for (i = 0; i < 512; i++) {
- if (dat[i] == 0xff) continue;
+ if (dat[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
@@ -1033,7 +1035,8 @@
erased block, in which case the ECC will not come out right.
We'll suppress the error and tell the caller everything's
OK. Because it is. */
- if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
+ if (!emptymatch)
+ ret = doc_ecc_decode(rs_decoder, dat, calc_ecc);
if (ret > 0)
printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
}
@@ -1050,11 +1053,20 @@
/*u_char mydatabuf[528]; */
-static struct nand_oobinfo doc200x_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+/* The strange out-of-order .oobfree list below is a (possibly unneeded)
+ * attempt to retain compatibility. It used to read:
+ * .oobfree = { {8, 8} }
+ * Since that leaves two bytes unusable, it was changed. But the following
+ * scheme might affect existing jffs2 installs by moving the cleanmarker:
+ * .oobfree = { {6, 10} }
+ * jffs2 seems to handle the above gracefully, but the current scheme seems
+ * safer. The only problem with it is that any code that parses oobfree must
+ * be able to handle out-of-order segments.
+ */
+static struct nand_ecclayout doc200x_oobinfo = {
.eccbytes = 6,
.eccpos = {0, 1, 2, 3, 4, 5},
- .oobfree = { {8, 8} }
+ .oobfree = {{8, 8}, {6, 2}}
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1063,28 +1075,28 @@
either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
header. The page #s of the found media headers are placed in mh0_page and
mh1_page in the DOC private structure. */
-static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
- const char *id, int findmirror)
+static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const char *id, int findmirror)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift);
+ unsigned offs;
int ret;
size_t retlen;
- end = min(end, mtd->size); /* paranoia */
- for (offs = 0; offs < end; offs += mtd->erasesize) {
- ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
- if (retlen != mtd->oobblock) continue;
+ for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
+ ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize)
+ continue;
if (ret) {
- printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n",
- offs);
+ printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", offs);
}
- if (memcmp(buf, id, 6)) continue;
+ if (memcmp(buf, id, 6))
+ continue;
printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs);
if (doc->mh0_page == -1) {
doc->mh0_page = offs >> this->page_shift;
- if (!findmirror) return 1;
+ if (!findmirror)
+ return 1;
continue;
}
doc->mh1_page = offs >> this->page_shift;
@@ -1097,8 +1109,8 @@
/* Only one mediaheader was found. We want buf to contain a
mediaheader on return, so we'll have to re-read the one we found. */
offs = doc->mh0_page << this->page_shift;
- ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
- if (retlen != mtd->oobblock) {
+ ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize) {
/* Insanity. Give up. */
printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
return 0;
@@ -1106,8 +1118,7 @@
return 1;
}
-static inline int __init nftl_partscan(struct mtd_info *mtd,
- struct mtd_partition *parts)
+static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -1115,19 +1126,23 @@
u_char *buf;
struct NFTLMediaHeader *mh;
const unsigned psize = 1 << this->page_shift;
+ int numparts = 0;
unsigned blocks, maxblocks;
int offs, numheaders;
- buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
- if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
- mh = (struct NFTLMediaHeader *) buf;
+ if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1)))
+ goto out;
+ mh = (struct NFTLMediaHeader *)buf;
-/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
-/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
+ mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
+ mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
+ mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+
printk(KERN_INFO " DataOrgID = %s\n"
" NumEraseUnits = %d\n"
" FirstPhysicalEUN = %d\n"
@@ -1136,7 +1151,6 @@
mh->DataOrgID, mh->NumEraseUnits,
mh->FirstPhysicalEUN, mh->FormattedSize,
mh->UnitSizeFactor);
-/*#endif */
blocks = mtd->size >> this->phys_erase_shift;
maxblocks = min(32768U, mtd->erasesize - psize);
@@ -1145,8 +1159,8 @@
/* Auto-determine UnitSizeFactor. The constraints are:
- There can be at most 32768 virtual blocks.
- There can be at most (virtual block size - page size)
- virtual blocks (because MediaHeader+BBT must fit in 1).
- */
+ virtual blocks (because MediaHeader+BBT must fit in 1).
+ */
mh->UnitSizeFactor = 0xff;
while (blocks > maxblocks) {
blocks >>= 1;
@@ -1179,31 +1193,35 @@
offs <<= this->page_shift;
offs += mtd->erasesize;
- /*parts[0].name = " DiskOnChip Boot / Media Header partition"; */
- /*parts[0].offset = 0; */
- /*parts[0].size = offs; */
-
- parts[0].name = " DiskOnChip BDTL partition";
- parts[0].offset = offs;
- parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
-
- offs += parts[0].size;
- if (offs < mtd->size) {
- parts[1].name = " DiskOnChip Remainder partition";
- parts[1].offset = offs;
- parts[1].size = mtd->size - offs;
- ret = 2;
- goto out;
+ if (show_firmware_partition == 1) {
+ parts[0].name = " DiskOnChip Firmware / Media Header partition";
+ parts[0].offset = 0;
+ parts[0].size = offs;
+ numparts = 1;
}
- ret = 1;
-out:
+
+ parts[numparts].name = " DiskOnChip BDTL partition";
+ parts[numparts].offset = offs;
+ parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+
+ offs += parts[numparts].size;
+ numparts++;
+
+ if (offs < mtd->size) {
+ parts[numparts].name = " DiskOnChip Remainder partition";
+ parts[numparts].offset = offs;
+ parts[numparts].size = mtd->size - offs;
+ numparts++;
+ }
+
+ ret = numparts;
+ out:
kfree(buf);
return ret;
}
/* This is a stripped-down copy of the code in inftlmount.c */
-static inline int __init inftl_partscan(struct mtd_info *mtd,
- struct mtd_partition *parts)
+static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -1220,15 +1238,16 @@
if (inftl_bbt_write)
end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift);
- buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
- if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out;
+ if (!find_media_headers(mtd, buf, "BNAND", 0))
+ goto out;
doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
- mh = (struct INFTLMediaHeader *) buf;
+ mh = (struct INFTLMediaHeader *)buf;
mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
@@ -1237,8 +1256,6 @@
mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
-/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
-/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
printk(KERN_INFO " bootRecordID = %s\n"
" NoOfBootImageBlocks = %d\n"
" NoOfBinaryPartitions = %d\n"
@@ -1256,7 +1273,6 @@
((unsigned char *) &mh->OsakVersion)[2] & 0xf,
((unsigned char *) &mh->OsakVersion)[3] & 0xf,
mh->PercentUsed);
-/*#endif */
vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
@@ -1282,8 +1298,6 @@
ip->spareUnits = le32_to_cpu(ip->spareUnits);
ip->Reserved0 = le32_to_cpu(ip->Reserved0);
-/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
-/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
printk(KERN_INFO " PARTITION[%d] ->\n"
" virtualUnits = %d\n"
" firstUnit = %d\n"
@@ -1293,16 +1307,14 @@
i, ip->virtualUnits, ip->firstUnit,
ip->lastUnit, ip->flags,
ip->spareUnits);
-/*#endif */
-/*
- if ((i == 0) && (ip->firstUnit > 0)) {
+ if ((show_firmware_partition == 1) &&
+ (i == 0) && (ip->firstUnit > 0)) {
parts[0].name = " DiskOnChip IPL / Media Header partition";
parts[0].offset = 0;
parts[0].size = mtd->erasesize * ip->firstUnit;
numparts = 1;
}
-*/
if (ip->flags & INFTL_BINARY)
parts[numparts].name = " DiskOnChip BDK partition";
@@ -1311,8 +1323,10 @@
parts[numparts].offset = ip->firstUnit << vshift;
parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift;
numparts++;
- if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit;
- if (ip->flags & INFTL_LAST) break;
+ if (ip->lastUnit > lastvunit)
+ lastvunit = ip->lastUnit;
+ if (ip->flags & INFTL_LAST)
+ break;
}
lastvunit++;
if ((lastvunit << vshift) < end) {
@@ -1322,7 +1336,7 @@
numparts++;
}
ret = numparts;
-out:
+ out:
kfree(buf);
return ret;
}
@@ -1334,11 +1348,12 @@
struct doc_priv *doc = this->priv;
struct mtd_partition parts[2];
- memset((char *) parts, 0, sizeof(parts));
+ memset((char *)parts, 0, sizeof(parts));
/* On NFTL, we have to find the media headers before we can read the
BBTs, since they're stored in the media header eraseblocks. */
numparts = nftl_partscan(mtd, parts);
- if (!numparts) return -EIO;
+ if (!numparts)
+ return -EIO;
this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
NAND_BBT_VERSION;
@@ -1385,8 +1400,7 @@
this->bbt_td->pages[0] = 2;
this->bbt_md = NULL;
} else {
- this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
- NAND_BBT_VERSION;
+ this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
if (inftl_bbt_write)
this->bbt_td->options |= NAND_BBT_WRITE;
this->bbt_td->offs = 8;
@@ -1396,8 +1410,7 @@
this->bbt_td->reserved_block_code = 0x01;
this->bbt_td->pattern = "MSYS_BBT";
- this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
- NAND_BBT_VERSION;
+ this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
if (inftl_bbt_write)
this->bbt_md->options |= NAND_BBT_WRITE;
this->bbt_md->offs = 8;
@@ -1412,12 +1425,13 @@
At least as nand_bbt.c is currently written. */
if ((ret = nand_scan_bbt(mtd, NULL)))
return ret;
- memset((char *) parts, 0, sizeof(parts));
+ memset((char *)parts, 0, sizeof(parts));
numparts = inftl_partscan(mtd, parts);
/* At least for now, require the INFTL Media Header. We could probably
do without it for non-INFTL use, since all it gives us is
autopartitioning, but I want to give it more thought. */
- if (!numparts) return -EIO;
+ if (!numparts)
+ return -EIO;
add_mtd_device(mtd);
#ifdef CONFIG_MTD_PARTITIONS
if (!no_autopart)
@@ -1431,7 +1445,6 @@
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = doc2000_write_byte;
this->read_byte = doc2000_read_byte;
this->write_buf = doc2000_writebuf;
this->read_buf = doc2000_readbuf;
@@ -1449,7 +1462,6 @@
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = doc2001_write_byte;
this->read_byte = doc2001_read_byte;
this->write_buf = doc2001_writebuf;
this->read_buf = doc2001_readbuf;
@@ -1481,16 +1493,15 @@
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = NULL;
this->read_byte = doc2001plus_read_byte;
this->write_buf = doc2001plus_writebuf;
this->read_buf = doc2001plus_readbuf;
this->verify_buf = doc2001plus_verifybuf;
this->scan_bbt = inftl_scan_bbt;
- this->hwcontrol = NULL;
+ this->cmd_ctrl = NULL;
this->select_chip = doc2001plus_select_chip;
this->cmdfunc = doc2001plus_command;
- this->enable_hwecc = doc2001plus_enable_hwecc;
+ this->ecc.hwctl = doc2001plus_enable_hwecc;
doc->chips_per_floor = 1;
mtd->name = "DiskOnChip Millennium Plus";
@@ -1498,7 +1509,7 @@
return 1;
}
-static inline int __init doc_probe(unsigned long physadr)
+static int __init doc_probe(unsigned long physadr)
{
unsigned char ChipID;
struct mtd_info *mtd;
@@ -1527,20 +1538,16 @@
save_control = ReadDOC(virtadr, DOCControl);
/* Reset the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
- virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
- virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
/* Enable the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
- virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
- virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
ChipID = ReadDOC(virtadr, ChipID);
- switch(ChipID) {
+ switch (ChipID) {
case DOC_ChipID_Doc2k:
reg = DoC_2k_ECCStatus;
break;
@@ -1556,15 +1563,13 @@
ReadDOC(virtadr, Mplus_Power);
/* Reset the Millennium Plus ASIC */
- tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
- DOC_MODE_BDECT;
+ tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
mdelay(1);
/* Enable the Millennium Plus ASIC */
- tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
- DOC_MODE_BDECT;
+ tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
mdelay(1);
@@ -1588,7 +1593,7 @@
goto notfound;
}
/* Check the TOGGLE bit in the ECC register */
- tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+ tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
if ((tmp == tmpb) || (tmp != tmpc)) {
@@ -1618,11 +1623,11 @@
if (ChipID == DOC_ChipID_DocMilPlus16) {
WriteDOC(~newval, virtadr, Mplus_AliasResolution);
oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
- WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */
+ WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */
} else {
WriteDOC(~newval, virtadr, AliasResolution);
oldval = ReadDOC(doc->virtadr, AliasResolution);
- WriteDOC(newval, virtadr, AliasResolution); /* restore it */
+ WriteDOC(newval, virtadr, AliasResolution); /* restore it */
}
newval = ~newval;
if (oldval == newval) {
@@ -1634,16 +1639,13 @@
printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr);
len = sizeof(struct mtd_info) +
- sizeof(struct nand_chip) +
- sizeof(struct doc_priv) +
- (2 * sizeof(struct nand_bbt_descr));
- mtd = kmalloc(len, GFP_KERNEL);
+ sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
+ mtd = kzalloc(len, GFP_KERNEL);
if (!mtd) {
printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
ret = -ENOMEM;
goto fail;
}
- memset(mtd, 0, len);
nand = (struct nand_chip *) (mtd + 1);
doc = (struct doc_priv *) (nand + 1);
@@ -1655,17 +1657,19 @@
nand->priv = doc;
nand->select_chip = doc200x_select_chip;
- nand->hwcontrol = doc200x_hwcontrol;
+ nand->cmd_ctrl = doc200x_hwcontrol;
nand->dev_ready = doc200x_dev_ready;
nand->waitfunc = doc200x_wait;
nand->block_bad = doc200x_block_bad;
- nand->enable_hwecc = doc200x_enable_hwecc;
- nand->calculate_ecc = doc200x_calculate_ecc;
- nand->correct_data = doc200x_correct_data;
+ nand->ecc.hwctl = doc200x_enable_hwecc;
+ nand->ecc.calculate = doc200x_calculate_ecc;
+ nand->ecc.correct = doc200x_correct_data;
- nand->autooob = &doc200x_oobinfo;
- nand->eccmode = NAND_ECC_HW6_512;
- nand->options = NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME;
+ nand->ecc.layout = &doc200x_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 6;
+ nand->options = NAND_USE_FLASH_BBT;
doc->physadr = physadr;
doc->virtadr = virtadr;
@@ -1699,11 +1703,11 @@
doclist = mtd;
return 0;
-notfound:
+ notfound:
/* Put back the contents of the DOCControl register, in case it's not
actually a DiskOnChip. */
WriteDOC(save_control, virtadr, DOCControl);
-fail:
+ fail:
iounmap(virtadr);
return ret;
}
@@ -1740,7 +1744,7 @@
*/
rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
if (!rs_decoder) {
- printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
+ printk(KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
return -ENOMEM;
}
@@ -1750,7 +1754,7 @@
if (ret < 0)
goto outerr;
} else {
- for (i=0; (doc_locations[i] != 0xffffffff); i++) {
+ for (i = 0; (doc_locations[i] != 0xffffffff); i++) {
doc_probe(doc_locations[i]);
}
}
@@ -1762,7 +1766,7 @@
goto outerr;
}
return 0;
-outerr:
+ outerr:
free_rs(rs_decoder);
return ret;
}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
new file mode 100644
index 0000000..0bd1bdb
--- /dev/null
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -0,0 +1,767 @@
+/* Freescale Enhanced Local Bus Controller FCM NAND driver
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ * Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#ifdef VERBOSE_DEBUG
+#define DEBUG_ELBC
+#define vdbg(format, arg...) printf("DEBUG: " format, ##arg)
+#else
+#define vdbg(format, arg...) do {} while (0)
+#endif
+
+/* Can't use plain old DEBUG because the linux mtd
+ * headers define it as a macro.
+ */
+#ifdef DEBUG_ELBC
+#define dbg(format, arg...) printf("DEBUG: " format, ##arg)
+#else
+#define dbg(format, arg...) do {} while (0)
+#endif
+
+#define MAX_BANKS 8
+#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
+#define FCM_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for FCM */
+
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+
+struct fsl_elbc_ctrl;
+
+/* mtd information per set */
+
+struct fsl_elbc_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct fsl_elbc_ctrl *ctrl;
+
+ struct device *dev;
+ int bank; /* Chip select bank number */
+ u8 __iomem *vbase; /* Chip select base virtual address */
+ int page_size; /* NAND page size (0=512, 1=2048) */
+ unsigned int fmr; /* FCM Flash Mode Register value */
+};
+
+/* overview of the fsl elbc controller */
+
+struct fsl_elbc_ctrl {
+ struct nand_hw_control controller;
+ struct fsl_elbc_mtd *chips[MAX_BANKS];
+
+ /* device info */
+ lbus83xx_t *regs;
+ u8 __iomem *addr; /* Address of assigned FCM buffer */
+ unsigned int page; /* Last page written to / read from */
+ unsigned int read_bytes; /* Number of bytes read during command */
+ unsigned int column; /* Saved column from SEQIN */
+ unsigned int index; /* Pointer to next byte to 'read' */
+ unsigned int status; /* status read from LTESR after last op */
+ unsigned int mdr; /* UPM/FCM Data Register value */
+ unsigned int use_mdr; /* Non zero if the MDR is to be set */
+ unsigned int oob; /* Non zero if operating on OOB data */
+ uint8_t *oob_poi; /* Place to write ECC after read back */
+};
+
+/* These map to the positions used by the FCM hardware ECC generator */
+
+/* Small Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
+ .eccbytes = 3,
+ .eccpos = {6, 7, 8},
+ .oobfree = { {0, 5}, {9, 7} },
+ .oobavail = 12,
+};
+
+/* Small Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
+ .eccbytes = 3,
+ .eccpos = {8, 9, 10},
+ .oobfree = { {0, 5}, {6, 2}, {11, 5} },
+ .oobavail = 12,
+};
+
+/* Large Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
+ .eccbytes = 12,
+ .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
+ .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
+ .oobavail = 48,
+};
+
+/* Large Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
+ .eccbytes = 12,
+ .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
+ .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+ .oobavail = 48,
+};
+
+/*=================================*/
+
+/*
+ * Set up the FCM hardware block and page address fields, and the fcm
+ * structure addr field to point to the correct FCM buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ lbus83xx_t *lbc = ctrl->regs;
+ int buf_num;
+
+ ctrl->page = page_addr;
+
+ if (priv->page_size) {
+ out_be32(&lbc->fbar, page_addr >> 6);
+ out_be32(&lbc->fpar,
+ ((page_addr << FPAR_LP_PI_SHIFT) & FPAR_LP_PI) |
+ (oob ? FPAR_LP_MS : 0) | column);
+ buf_num = (page_addr & 1) << 2;
+ } else {
+ out_be32(&lbc->fbar, page_addr >> 5);
+ out_be32(&lbc->fpar,
+ ((page_addr << FPAR_SP_PI_SHIFT) & FPAR_SP_PI) |
+ (oob ? FPAR_SP_MS : 0) | column);
+ buf_num = page_addr & 7;
+ }
+
+ ctrl->addr = priv->vbase + buf_num * 1024;
+ ctrl->index = column;
+
+ /* for OOB data point to the second half of the buffer */
+ if (oob)
+ ctrl->index += priv->page_size ? 2048 : 512;
+
+ vdbg("set_addr: bank=%d, ctrl->addr=0x%p (0x%p), "
+ "index %x, pes %d ps %d\n",
+ buf_num, ctrl->addr, priv->vbase, ctrl->index,
+ chip->phys_erase_shift, chip->page_shift);
+}
+
+/*
+ * execute FCM command and wait for it to complete
+ */
+static int fsl_elbc_run_command(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ lbus83xx_t *lbc = ctrl->regs;
+ long long end_tick;
+ u32 ltesr;
+
+ /* Setup the FMR[OP] to execute without write protection */
+ out_be32(&lbc->fmr, priv->fmr | 3);
+ if (ctrl->use_mdr)
+ out_be32(&lbc->mdr, ctrl->mdr);
+
+ vdbg("fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
+ in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
+ vdbg("fsl_elbc_run_command: fbar=%08x fpar=%08x "
+ "fbcr=%08x bank=%d\n",
+ in_be32(&lbc->fbar), in_be32(&lbc->fpar),
+ in_be32(&lbc->fbcr), priv->bank);
+
+ /* execute special operation */
+ out_be32(&lbc->lsor, priv->bank);
+
+ /* wait for FCM complete flag or timeout */
+ end_tick = usec2ticks(FCM_TIMEOUT_MSECS * 1000) + get_ticks();
+
+ ltesr = 0;
+ while (end_tick > get_ticks()) {
+ ltesr = in_be32(&lbc->ltesr);
+ if (ltesr & LTESR_CC)
+ break;
+ }
+
+ ctrl->status = ltesr & LTESR_NAND_MASK;
+ out_be32(&lbc->ltesr, ctrl->status);
+ out_be32(&lbc->lteatr, 0);
+
+ /* store mdr value in case it was needed */
+ if (ctrl->use_mdr)
+ ctrl->mdr = in_be32(&lbc->mdr);
+
+ ctrl->use_mdr = 0;
+
+ vdbg("fsl_elbc_run_command: stat=%08x mdr=%08x fmr=%08x\n",
+ ctrl->status, ctrl->mdr, in_be32(&lbc->fmr));
+
+ /* returns 0 on success otherwise non-zero) */
+ return ctrl->status == LTESR_CC ? 0 : -EIO;
+}
+
+static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ lbus83xx_t *lbc = ctrl->regs;
+
+ if (priv->page_size) {
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+ (FIR_OP_RBW << FIR_OP4_SHIFT));
+
+ out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+ } else {
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_RBW << FIR_OP3_SHIFT));
+
+ if (oob)
+ out_be32(&lbc->fcr,
+ NAND_CMD_READOOB << FCR_CMD0_SHIFT);
+ else
+ out_be32(&lbc->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
+ }
+}
+
+/* cmdfunc send commands to the FCM */
+static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ lbus83xx_t *lbc = ctrl->regs;
+
+ ctrl->use_mdr = 0;
+
+ /* clear the read buffer */
+ ctrl->read_bytes = 0;
+ if (command != NAND_CMD_PAGEPROG)
+ ctrl->index = 0;
+
+ switch (command) {
+ /* READ0 and READ1 read the entire buffer to use hardware ECC. */
+ case NAND_CMD_READ1:
+ column += 256;
+
+ /* fall-through */
+ case NAND_CMD_READ0:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
+ " 0x%x, column: 0x%x.\n", page_addr, column);
+
+ out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
+ set_addr(mtd, 0, page_addr, 0);
+
+ ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ ctrl->index += column;
+
+ fsl_elbc_do_read(chip, 0);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* READOOB reads only the OOB because no ECC is performed. */
+ case NAND_CMD_READOOB:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
+ " 0x%x, column: 0x%x.\n", page_addr, column);
+
+ out_be32(&lbc->fbcr, mtd->oobsize - column);
+ set_addr(mtd, column, page_addr, 1);
+
+ ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+ fsl_elbc_do_read(chip, 1);
+ fsl_elbc_run_command(mtd);
+
+ return;
+
+ /* READID must read all 5 possible bytes while CEB is active */
+ case NAND_CMD_READID:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+
+ out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_UA << FIR_OP1_SHIFT) |
+ (FIR_OP_RBW << FIR_OP2_SHIFT));
+ out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
+ /* 5 bytes for manuf, device and exts */
+ out_be32(&lbc->fbcr, 5);
+ ctrl->read_bytes = 5;
+ ctrl->use_mdr = 1;
+ ctrl->mdr = 0;
+
+ set_addr(mtd, 0, 0, 0);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* ERASE1 stores the block and page address */
+ case NAND_CMD_ERASE1:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
+ "page_addr: 0x%x.\n", page_addr);
+ set_addr(mtd, 0, page_addr, 0);
+ return;
+
+ /* ERASE2 uses the block and page address from ERASE1 */
+ case NAND_CMD_ERASE2:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_PA << FIR_OP1_SHIFT) |
+ (FIR_OP_CM1 << FIR_OP2_SHIFT));
+
+ out_be32(&lbc->fcr,
+ (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) |
+ (NAND_CMD_ERASE2 << FCR_CMD1_SHIFT));
+
+ out_be32(&lbc->fbcr, 0);
+ ctrl->read_bytes = 0;
+
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* SEQIN sets up the addr buffer and all registers except the length */
+ case NAND_CMD_SEQIN: {
+ u32 fcr;
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+ "page_addr: 0x%x, column: 0x%x.\n",
+ page_addr, column);
+
+ ctrl->column = column;
+ ctrl->oob = 0;
+
+ if (priv->page_size) {
+ fcr = (NAND_CMD_SEQIN << FCR_CMD0_SHIFT) |
+ (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT);
+
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_WB << FIR_OP3_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP4_SHIFT));
+ } else {
+ fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
+ (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
+
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CM2 << FIR_OP1_SHIFT) |
+ (FIR_OP_CA << FIR_OP2_SHIFT) |
+ (FIR_OP_PA << FIR_OP3_SHIFT) |
+ (FIR_OP_WB << FIR_OP4_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP5_SHIFT));
+
+ if (column >= mtd->writesize) {
+ /* OOB area --> READOOB */
+ column -= mtd->writesize;
+ fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
+ ctrl->oob = 1;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
+ } else {
+ /* Second 256 bytes --> READ1 */
+ fcr |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
+ }
+ }
+
+ out_be32(&lbc->fcr, fcr);
+ set_addr(mtd, column, page_addr, ctrl->oob);
+ return;
+ }
+
+ /* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+ case NAND_CMD_PAGEPROG: {
+ int full_page;
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
+ "writing %d bytes.\n", ctrl->index);
+
+ /* if the write did not start at 0 or is not a full page
+ * then set the exact length, otherwise use a full page
+ * write so the HW generates the ECC.
+ */
+ if (ctrl->oob || ctrl->column != 0 ||
+ ctrl->index != mtd->writesize + mtd->oobsize) {
+ out_be32(&lbc->fbcr, ctrl->index);
+ full_page = 0;
+ } else {
+ out_be32(&lbc->fbcr, 0);
+ full_page = 1;
+ }
+
+ fsl_elbc_run_command(mtd);
+
+ /* Read back the page in order to fill in the ECC for the
+ * caller. Is this really needed?
+ */
+ if (full_page && ctrl->oob_poi) {
+ out_be32(&lbc->fbcr, 3);
+ set_addr(mtd, 6, page_addr, 1);
+
+ ctrl->read_bytes = mtd->writesize + 9;
+
+ fsl_elbc_do_read(chip, 1);
+ fsl_elbc_run_command(mtd);
+
+ memcpy_fromio(ctrl->oob_poi + 6,
+ &ctrl->addr[ctrl->index], 3);
+ ctrl->index += 3;
+ }
+
+ ctrl->oob_poi = NULL;
+ return;
+ }
+
+ /* CMD_STATUS must read the status byte while CEB is active */
+ /* Note - it does not wait for the ready line */
+ case NAND_CMD_STATUS:
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_RBW << FIR_OP1_SHIFT));
+ out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
+ out_be32(&lbc->fbcr, 1);
+ set_addr(mtd, 0, 0, 0);
+ ctrl->read_bytes = 1;
+
+ fsl_elbc_run_command(mtd);
+
+ /* The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
+ return;
+
+ /* RESET without waiting for the ready line */
+ case NAND_CMD_RESET:
+ dbg("fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+ out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
+ out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ default:
+ printf("fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
+ command);
+ }
+}
+
+static void fsl_elbc_select_chip(struct mtd_info *mtd, int chip)
+{
+ /* The hardware does not seem to support multiple
+ * chips per bank.
+ */
+}
+
+/*
+ * Write buf to the FCM Controller Data Buffer
+ */
+static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+ if (len <= 0) {
+ printf("write_buf of %d bytes", len);
+ ctrl->status = 0;
+ return;
+ }
+
+ if ((unsigned int)len > bufsize - ctrl->index) {
+ printf("write_buf beyond end of buffer "
+ "(%d requested, %u available)\n",
+ len, bufsize - ctrl->index);
+ len = bufsize - ctrl->index;
+ }
+
+ memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+ /*
+ * This is workaround for the weird elbc hangs during nand write,
+ * Scott Wood says: "...perhaps difference in how long it takes a
+ * write to make it through the localbus compared to a write to IMMR
+ * is causing problems, and sync isn't helping for some reason."
+ * Reading back the last byte helps though.
+ */
+ in_8(&ctrl->addr[ctrl->index] + len - 1);
+
+ ctrl->index += len;
+}
+
+/*
+ * read a byte from either the FCM hardware buffer if it has any data left
+ * otherwise issue a command to read a single byte.
+ */
+static u8 fsl_elbc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+
+ /* If there are still bytes in the FCM, then use the next byte. */
+ if (ctrl->index < ctrl->read_bytes)
+ return in_8(&ctrl->addr[ctrl->index++]);
+
+ printf("read_byte beyond end of buffer\n");
+ return ERR_BYTE;
+}
+
+/*
+ * Read from the FCM Controller Data Buffer
+ */
+static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ int avail;
+
+ if (len < 0)
+ return;
+
+ avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
+ memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
+ ctrl->index += avail;
+
+ if (len > avail)
+ printf("read_buf beyond end of buffer "
+ "(%d requested, %d available)\n",
+ len, avail);
+}
+
+/*
+ * Verify buffer against the FCM Controller Data Buffer
+ */
+static int fsl_elbc_verify_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ int i;
+
+ if (len < 0) {
+ printf("write_buf of %d bytes", len);
+ return -EINVAL;
+ }
+
+ if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
+ printf("verify_buf beyond end of buffer "
+ "(%d requested, %u available)\n",
+ len, ctrl->read_bytes - ctrl->index);
+
+ ctrl->index = ctrl->read_bytes;
+ return -EINVAL;
+ }
+
+ for (i = 0; i < len; i++)
+ if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
+ break;
+
+ ctrl->index += len;
+ return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
+}
+
+/* This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+ lbus83xx_t *lbc = ctrl->regs;
+
+ if (ctrl->status != LTESR_CC)
+ return NAND_STATUS_FAIL;
+
+ /* Use READ_STATUS command, but wait for the device to be ready */
+ ctrl->use_mdr = 0;
+ out_be32(&lbc->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_RBW << FIR_OP1_SHIFT));
+ out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
+ out_be32(&lbc->fbcr, 1);
+ set_addr(mtd, 0, 0, 0);
+ ctrl->read_bytes = 1;
+
+ fsl_elbc_run_command(mtd);
+
+ if (ctrl->status != LTESR_CC)
+ return NAND_STATUS_FAIL;
+
+ /* The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
+ return fsl_elbc_read_byte(mtd);
+}
+
+static int fsl_elbc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf)
+{
+ fsl_elbc_read_buf(mtd, buf, mtd->writesize);
+ fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL)
+ mtd->ecc_stats.failed++;
+
+ return 0;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static void fsl_elbc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+
+ fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+ fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ ctrl->oob_poi = chip->oob_poi;
+}
+
+static struct fsl_elbc_ctrl *elbc_ctrl;
+
+static void fsl_elbc_ctrl_init(void)
+{
+ immap_t *im = (immap_t *)CFG_IMMR;
+
+ elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
+ if (!elbc_ctrl)
+ return;
+
+ elbc_ctrl->regs = &im->lbus;
+
+ /* clear event registers */
+ out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK);
+ out_be32(&elbc_ctrl->regs->lteatr, 0);
+
+ /* Enable interrupts for any detected events */
+ out_be32(&elbc_ctrl->regs->lteir, LTESR_NAND_MASK);
+
+ elbc_ctrl->read_bytes = 0;
+ elbc_ctrl->index = 0;
+ elbc_ctrl->addr = NULL;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ struct fsl_elbc_mtd *priv;
+ uint32_t br, or;
+
+ if (!elbc_ctrl) {
+ fsl_elbc_ctrl_init();
+ if (!elbc_ctrl)
+ return -1;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->ctrl = elbc_ctrl;
+ priv->vbase = nand->IO_ADDR_R;
+
+ /* Find which chip select it is connected to. It'd be nice
+ * if we could pass more than one datum to the NAND driver...
+ */
+ for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
+ br = in_be32(&elbc_ctrl->regs->bank[priv->bank].br);
+ or = in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+
+ if ((br & BR_V) && (br & BR_MSEL) == BR_MS_FCM &&
+ (br & or & BR_BA) == (phys_addr_t)nand->IO_ADDR_R)
+ break;
+ }
+
+ if (priv->bank >= MAX_BANKS) {
+ printf("fsl_elbc_nand: address did not match any "
+ "chip selects\n");
+ return -ENODEV;
+ }
+
+ elbc_ctrl->chips[priv->bank] = priv;
+
+ /* fill in nand_chip structure */
+ /* set up function call table */
+ nand->read_byte = fsl_elbc_read_byte;
+ nand->write_buf = fsl_elbc_write_buf;
+ nand->read_buf = fsl_elbc_read_buf;
+ nand->verify_buf = fsl_elbc_verify_buf;
+ nand->select_chip = fsl_elbc_select_chip;
+ nand->cmdfunc = fsl_elbc_cmdfunc;
+ nand->waitfunc = fsl_elbc_wait;
+
+ /* set up nand options */
+ nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+
+ nand->controller = &elbc_ctrl->controller;
+ nand->priv = priv;
+
+ nand->ecc.read_page = fsl_elbc_read_page;
+ nand->ecc.write_page = fsl_elbc_write_page;
+
+ /* If CS Base Register selects full hardware ECC then use it */
+ if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
+ nand->ecc.mode = NAND_ECC_HW;
+
+ nand->ecc.layout = (priv->fmr & FMR_ECCM) ?
+ &fsl_elbc_oob_sp_eccm1 :
+ &fsl_elbc_oob_sp_eccm0;
+
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
+ nand->ecc.steps = 1;
+ } else {
+ /* otherwise fall back to default software ECC */
+ nand->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
+
+ /* adjust Option Register and ECC to match Flash page size */
+ if (or & OR_FCM_PGS) {
+ priv->page_size = 1;
+
+ /* adjust ecc setup if needed */
+ if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
+ nand->ecc.steps = 4;
+ nand->ecc.layout = (priv->fmr & FMR_ECCM) ?
+ &fsl_elbc_oob_lp_eccm1 :
+ &fsl_elbc_oob_lp_eccm0;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 67ae9c8..e651903 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -20,8 +20,6 @@
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
-static int fsl_upm_in_pattern;
-
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
@@ -51,49 +49,38 @@
}
}
-static void nand_hwcontrol (struct mtd_info *mtd, int cmd)
+static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- switch (cmd) {
- case NAND_CTL_SETCLE:
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
- fsl_upm_in_pattern++;
- break;
- case NAND_CTL_SETALE:
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
- fsl_upm_in_pattern++;
- break;
- case NAND_CTL_CLRCLE:
- case NAND_CTL_CLRALE:
+ if (!(ctrl & fun->last_ctrl)) {
fsl_upm_end_pattern(&fun->upm);
- fsl_upm_in_pattern--;
- break;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
}
-}
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *chip = mtd->priv;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ else if (ctrl & NAND_CLE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ }
- if (fsl_upm_in_pattern) {
- struct fsl_upm_nand *fun = chip->priv;
+ fsl_upm_run_pattern(&fun->upm, fun->width, cmd);
- fsl_upm_run_pattern(&fun->upm, fun->width, byte);
-
- /*
- * Some boards/chips needs this. At least on MPC8360E-RDK we
- * need it. Probably weird chip, because I don't see any need
- * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
- * 0-2 unexpected busy states per block read.
- */
- if (fun->wait_pattern) {
- while (!fun->dev_ready())
- debug("unexpected busy state\n");
- }
- } else {
- out_8(chip->IO_ADDR_W, byte);
+ /*
+ * Some boards/chips needs this. At least on MPC8360E-RDK we
+ * need it. Probably weird chip, because I don't see any need
+ * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
+ * 0-2 unexpected busy states per block read.
+ */
+ if (fun->wait_pattern) {
+ while (!fun->dev_ready())
+ debug("unexpected busy state\n");
}
}
@@ -148,13 +135,14 @@
if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
+ fun->last_ctrl = NAND_CLE;
+
chip->priv = fun;
chip->chip_delay = fun->chip_delay;
- chip->eccmode = NAND_ECC_SOFT;
- chip->hwcontrol = nand_hwcontrol;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->cmd_ctrl = fun_cmd_ctrl;
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
- chip->write_byte = nand_write_byte;
chip->write_buf = nand_write_buf;
chip->verify_buf = nand_verify_buf;
if (fun->dev_ready)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 6416d15..a29ff11 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -10,39 +10,21 @@
* http://www.linux-mtd.infradead.org/tech/nand.html
*
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- * 2002 Thomas Gleixner (tglx@linutronix.de)
+ * 2002-2006 Thomas Gleixner (tglx@linutronix.de)
*
- * 02-08-2004 tglx: support for strange chips, which cannot auto increment
- * pages on read / read_oob
- *
- * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes
- * pointed this out, as he marked an auto increment capable chip
- * as NOAUTOINCR in the board driver.
- * Make reads over block boundaries work too
- *
- * 04-14-2004 tglx: first working version for 2k page size chips
- *
- * 05-19-2004 tglx: Basic support for Renesas AG-AND chips
- *
- * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared
- * among multiple independend devices. Suggestions and initial patch
- * from Ben Dooks <ben-mtd@fluff.org>
- *
- * Credits:
+ * Credits:
* David Woodhouse for adding multichip support
*
* Aleph One Ltd. and Toby Churchill Ltd. for supporting the
* rework for 2K page size chips
*
- * TODO:
+ * TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
* if we have HW ecc support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
*
- * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -51,8 +33,10 @@
/* XXX U-BOOT XXX */
#if 0
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -62,6 +46,7 @@
#include <linux/mtd/compatmac.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
+#include <linux/leds.h>
#include <asm/io.h>
#ifdef CONFIG_MTD_PARTITIONS
@@ -72,10 +57,13 @@
#include <common.h>
+#define ENOTSUPP 524 /* Operation is not supported */
+
#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
#include <malloc.h>
#include <watchdog.h>
+#include <linux/err.h>
#include <linux/mtd/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -89,82 +77,66 @@
#endif
/* Define default oob placement schemes for large and small page devices */
-static struct nand_oobinfo nand_oob_8 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_8 = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
- .oobfree = { {3, 2}, {6, 2} }
+ .oobfree = {
+ {.offset = 3,
+ .length = 2},
+ {.offset = 6,
+ .length = 2}}
};
-static struct nand_oobinfo nand_oob_16 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_16 = {
.eccbytes = 6,
.eccpos = {0, 1, 2, 3, 6, 7},
- .oobfree = { {8, 8} }
+ .oobfree = {
+ {.offset = 8,
+ . length = 8}}
};
-static struct nand_oobinfo nand_oob_64 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_64 = {
.eccbytes = 24,
.eccpos = {
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = { {2, 38} }
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 2,
+ .length = 38}}
};
-static struct nand_oobinfo nand_oob_128 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_128 = {
.eccbytes = 48,
.eccpos = {
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127},
- .oobfree = { {2, 78} }
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ .oobfree = {
+ {.offset = 2,
+ .length = 78}}
};
-/* This is used for padding purposes in nand_write_oob */
-static u_char *ffchars;
+
+static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
+ int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
+
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
/*
- * NAND low-level MTD interface functions
+ * For devices which display every fart in the system on a seperate LED. Is
+ * compiled away when LED support is disabled.
*/
-static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-
-static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
/* XXX U-BOOT XXX */
#if 0
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t * retlen);
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+DEFINE_LED_TRIGGER(nand_led_trigger);
#endif
-static int nand_erase (struct mtd_info *mtd, struct erase_info *instr);
-static void nand_sync (struct mtd_info *mtd);
-
-/* Some internal functions */
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
- struct nand_oobinfo *oobsel, int mode);
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
-#else
-#define nand_verify_pages(...) (0)
-#endif
-
-static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
/**
* nand_release_device - [GENERIC] release chip
@@ -174,33 +146,25 @@
*/
/* XXX U-BOOT XXX */
#if 0
-static void nand_release_device (struct mtd_info *mtd)
+static void nand_release_device(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* De-select the NAND device */
- this->select_chip(mtd, -1);
- /* Do we have a hardware controller ? */
- if (this->controller) {
- spin_lock(&this->controller->lock);
- this->controller->active = NULL;
- spin_unlock(&this->controller->lock);
- }
- /* Release the chip */
- spin_lock (&this->chip_lock);
- this->state = FL_READY;
- wake_up (&this->wq);
- spin_unlock (&this->chip_lock);
+ chip->select_chip(mtd, -1);
+
+ /* Release the controller and the chip */
+ spin_lock(&chip->controller->lock);
+ chip->controller->active = NULL;
+ chip->state = FL_READY;
+ wake_up(&chip->controller->wq);
+ spin_unlock(&chip->controller->lock);
}
#else
static void nand_release_device (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
- if (ffchars) {
- kfree(ffchars);
- ffchars = NULL;
- }
}
#endif
@@ -210,23 +174,10 @@
*
* Default read function for 8bit buswith
*/
-static u_char nand_read_byte(struct mtd_info *mtd)
+static uint8_t nand_read_byte(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- return readb(this->IO_ADDR_R);
-}
-
-/**
- * nand_write_byte - [DEFAULT] write one byte to the chip
- * @mtd: MTD device structure
- * @byte: pointer to data byte to write
- *
- * Default write function for 8it buswith
- */
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *this = mtd->priv;
- writeb(byte, this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return readb(chip->IO_ADDR_R);
}
/**
@@ -236,24 +187,10 @@
* Default read function for 16bit buswith with
* endianess conversion
*/
-static u_char nand_read_byte16(struct mtd_info *mtd)
+static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
-}
-
-/**
- * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip
- * @mtd: MTD device structure
- * @byte: pointer to data byte to write
- *
- * Default write function for 16bit buswith with
- * endianess conversion
- */
-static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *this = mtd->priv;
- writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
}
/**
@@ -265,40 +202,26 @@
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- return readw(this->IO_ADDR_R);
-}
-
-/**
- * nand_write_word - [DEFAULT] write one word to the chip
- * @mtd: MTD device structure
- * @word: data word to write
- *
- * Default write function for 16bit buswith without
- * endianess conversion
- */
-static void nand_write_word(struct mtd_info *mtd, u16 word)
-{
- struct nand_chip *this = mtd->priv;
- writew(word, this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return readw(chip->IO_ADDR_R);
}
/**
* nand_select_chip - [DEFAULT] control CE line
* @mtd: MTD device structure
- * @chip: chipnumber to select, -1 for deselect
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
-static void nand_select_chip(struct mtd_info *mtd, int chip)
+static void nand_select_chip(struct mtd_info *mtd, int chipnr)
{
- struct nand_chip *this = mtd->priv;
- switch(chip) {
+ struct nand_chip *chip = mtd->priv;
+
+ switch (chipnr) {
case -1:
- this->hwcontrol(mtd, NAND_CTL_CLRNCE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
break;
case 0:
- this->hwcontrol(mtd, NAND_CTL_SETNCE);
break;
default:
@@ -314,13 +237,13 @@
*
* Default write function for 8bit buswith
*/
-static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- writeb(buf[i], this->IO_ADDR_W);
+ for (i = 0; i < len; i++)
+ writeb(buf[i], chip->IO_ADDR_W);
}
/**
@@ -331,13 +254,13 @@
*
* Default read function for 8bit buswith
*/
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- buf[i] = readb(this->IO_ADDR_R);
+ for (i = 0; i < len; i++)
+ buf[i] = readb(chip->IO_ADDR_R);
}
/**
@@ -348,15 +271,14 @@
*
* Default verify function for 8bit buswith
*/
-static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- if (buf[i] != readb(this->IO_ADDR_R))
+ for (i = 0; i < len; i++)
+ if (buf[i] != readb(chip->IO_ADDR_R))
return -EFAULT;
-
return 0;
}
@@ -368,15 +290,15 @@
*
* Default write function for 16bit buswith
*/
-static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- writew(p[i], this->IO_ADDR_W);
+ for (i = 0; i < len; i++)
+ writew(p[i], chip->IO_ADDR_W);
}
@@ -388,15 +310,15 @@
*
* Default read function for 16bit buswith
*/
-static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- p[i] = readw(this->IO_ADDR_R);
+ for (i = 0; i < len; i++)
+ p[i] = readw(chip->IO_ADDR_R);
}
/**
@@ -407,15 +329,15 @@
*
* Default verify function for 16bit buswith
*/
-static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- if (p[i] != readw(this->IO_ADDR_R))
+ for (i = 0; i < len; i++)
+ if (p[i] != readw(chip->IO_ADDR_R))
return -EFAULT;
return 0;
@@ -432,38 +354,36 @@
static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
int page, chipnr, res = 0;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 bad;
- page = (int)(ofs >> this->page_shift) & this->pagemask;
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
if (getchip) {
- chipnr = (int)(ofs >> this->chip_shift);
+ chipnr = (int)(ofs >> chip->chip_shift);
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_READING);
+ nand_get_device(chip, mtd, FL_READING);
/* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, chipnr);
}
- if (this->options & NAND_BUSWIDTH_16) {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page);
- bad = cpu_to_le16(this->read_word(mtd));
- if (this->badblockpos & 0x1)
- bad >>= 1;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
+ page);
+ bad = cpu_to_le16(chip->read_word(mtd));
+ if (chip->badblockpos & 0x1)
+ bad >>= 8;
if ((bad & 0xFF) != 0xff)
res = 1;
} else {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page);
- if (this->read_byte(mtd) != 0xff)
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
+ if (chip->read_byte(mtd) != 0xff)
res = 1;
}
- if (getchip) {
- /* Deselect and wake up anyone waiting on the device */
+ if (getchip)
nand_release_device(mtd);
- }
return res;
}
@@ -478,22 +398,33 @@
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *this = mtd->priv;
- u_char buf[2] = {0, 0};
- size_t retlen;
- int block;
+ struct nand_chip *chip = mtd->priv;
+ uint8_t buf[2] = { 0, 0 };
+ int block, ret;
/* Get block number */
- block = ((int) ofs) >> this->bbt_erase_shift;
- this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+ block = (int)(ofs >> chip->bbt_erase_shift);
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* Do we have a flash based bad block table ? */
- if (this->options & NAND_USE_FLASH_BBT)
- return nand_update_bbt (mtd, ofs);
+ if (chip->options & NAND_USE_FLASH_BBT)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ /* We write two bytes, so we dont have to mess with 16 bit
+ * access
+ */
+ ofs += mtd->oobsize;
+ chip->ops.len = chip->ops.ooblen = 2;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
- /* We write two bytes, so we dont have to mess with 16 bit access */
- ofs += mtd->oobsize + (this->badblockpos & ~0x01);
- return nand_write_oob (mtd, ofs , 2, &retlen, buf);
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+ return ret;
}
/**
@@ -503,12 +434,12 @@
*
* The function expects, that the device is already selected
*/
-static int nand_check_wp (struct mtd_info *mtd)
+static int nand_check_wp(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Check the WP bit */
- this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
- return (this->read_byte(mtd) & 0x80) ? 0 : 1;
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
}
/**
@@ -521,17 +452,61 @@
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
-static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+ int allowbbt)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- if (!this->bbt)
- return this->block_bad(mtd, ofs, getchip);
+ if (!(chip->options & NAND_BBT_SCANNED)) {
+ chip->scan_bbt(mtd);
+ chip->options |= NAND_BBT_SCANNED;
+ }
+
+ if (!chip->bbt)
+ return chip->block_bad(mtd, ofs, getchip);
/* Return info from the table */
- return nand_isbad_bbt (mtd, ofs, allowbbt);
+ return nand_isbad_bbt(mtd, ofs, allowbbt);
}
+/*
+ * Wait for the ready pin, after a command
+ * The timeout is catched later.
+ */
+/* XXX U-BOOT XXX */
+#if 0
+void nand_wait_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned long timeo = jiffies + 2;
+
+ led_trigger_event(nand_led_trigger, LED_FULL);
+ /* wait until command is processed or timeout occures */
+ do {
+ if (chip->dev_ready(mtd))
+ break;
+ touch_softlockup_watchdog();
+ } while (time_before(jiffies, timeo));
+ led_trigger_event(nand_led_trigger, LED_OFF);
+}
+EXPORT_SYMBOL_GPL(nand_wait_ready);
+#else
+void nand_wait_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ u32 timeo = (CFG_HZ * 20) / 1000;
+
+ reset_timer();
+
+ /* wait until command is processed or timeout occures */
+ while (get_timer(0) < timeo) {
+ if (chip->dev_ready)
+ if (chip->dev_ready(mtd))
+ break;
+ }
+}
+#endif
+
/**
* nand_command - [DEFAULT] Send command to NAND device
* @mtd: MTD device structure
@@ -542,21 +517,21 @@
* Send command to NAND device. This function is used for small page
* devices (256/512 Bytes per page)
*/
-static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
{
- register struct nand_chip *this = mtd->priv;
+ register struct nand_chip *chip = mtd->priv;
+ int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
/*
* Write out the command to the device.
*/
if (command == NAND_CMD_SEQIN) {
int readcmd;
- if (column >= mtd->oobblock) {
+ if (column >= mtd->writesize) {
/* OOB area */
- column -= mtd->oobblock;
+ column -= mtd->writesize;
readcmd = NAND_CMD_READOOB;
} else if (column < 256) {
/* First 256 bytes --> READ0 */
@@ -565,38 +540,37 @@
column -= 256;
readcmd = NAND_CMD_READ1;
}
- this->write_byte(mtd, readcmd);
+ chip->cmd_ctrl(mtd, readcmd, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
}
- this->write_byte(mtd, command);
+ chip->cmd_ctrl(mtd, command, ctrl);
- /* Set ALE and clear CLE to start address cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-
- if (column != -1 || page_addr != -1) {
- this->hwcontrol(mtd, NAND_CTL_SETALE);
-
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
- column >>= 1;
- this->write_byte(mtd, column);
- }
- if (page_addr != -1) {
- this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
- this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
- /* One more address cycle for devices > 32MiB */
- if (this->chipsize > (32 << 20))
- this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
- }
- /* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
+ /*
+ * Address cycle, when necessary
+ */
+ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
}
+ if (page_addr != -1) {
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
+ /* One more address cycle for devices > 32MiB */
+ if (chip->chipsize > (32 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
+ }
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_PAGEPROG:
@@ -607,32 +581,32 @@
return;
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (chip->dev_ready)
break;
- udelay(this->chip_delay);
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_STATUS);
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & 0x40));
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd,
+ NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
return;
- /* This applies to read commands */
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
- if (!this->dev_ready) {
- udelay (this->chip_delay);
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
return;
}
}
-
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
- /* wait until command is processed */
- while (!this->dev_ready(mtd));
+ ndelay(100);
+
+ nand_wait_ready(mtd);
}
/**
@@ -642,55 +616,53 @@
* @column: the column address for this command, -1 if none
* @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This is the version for the new large page devices
- * We dont have the seperate regions as we have in the small page devices.
- * We must emulate NAND_CMD_READOOB to keep the code compatible.
- *
+ * Send command to NAND device. This is the version for the new large page
+ * devices We dont have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
-static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
{
- register struct nand_chip *this = mtd->priv;
+ register struct nand_chip *chip = mtd->priv;
/* Emulate NAND_CMD_READOOB */
if (command == NAND_CMD_READOOB) {
- column += mtd->oobblock;
+ column += mtd->writesize;
command = NAND_CMD_READ0;
}
-
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- /* Write out the command to the device. */
- this->write_byte(mtd, command);
- /* End command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ /* Command latch cycle */
+ chip->cmd_ctrl(mtd, command & 0xff,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
if (column != -1 || page_addr != -1) {
- this->hwcontrol(mtd, NAND_CTL_SETALE);
+ int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16)
column >>= 1;
- this->write_byte(mtd, column & 0xff);
- this->write_byte(mtd, column >> 8);
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, column >> 8, ctrl);
}
if (page_addr != -1) {
- this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
- this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ chip->cmd_ctrl(mtd, page_addr >> 8,
+ NAND_NCE | NAND_ALE);
/* One more address cycle for devices > 128MiB */
- if (this->chipsize > (128 << 20))
- this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff));
+ if (chip->chipsize > (128 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16,
+ NAND_NCE | NAND_ALE);
}
- /* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
}
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* program and erase have their own busy handlers
- * status and sequential in needs no delay
- */
+ * status, sequential in, and deplete1 need no delay
+ */
switch (command) {
case NAND_CMD_CACHEDPROG:
@@ -698,51 +670,69 @@
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
return;
+ /*
+ * read error status commands require only a short delay
+ */
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ udelay(chip->chip_delay);
+ return;
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (chip->dev_ready)
break;
- udelay(this->chip_delay);
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_STATUS);
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & 0x40));
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+ return;
+
+ case NAND_CMD_RNDOUT:
+ /* No ready / busy check necessary */
+ chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
return;
case NAND_CMD_READ0:
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- /* Write out the start read command */
- this->write_byte(mtd, NAND_CMD_READSTART);
- /* End command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- /* Fall through into ready check */
+ chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
- /* This applies to read commands */
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
- if (!this->dev_ready) {
- udelay (this->chip_delay);
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
- /* wait until command is processed */
- while (!this->dev_ready(mtd));
+ ndelay(100);
+
+ nand_wait_ready(mtd);
}
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @this: the nand chip descriptor
+ * @chip: the nand chip descriptor
* @mtd: MTD device structure
* @new_state: the state which is requested
*
@@ -750,100 +740,97 @@
*/
/* XXX U-BOOT XXX */
#if 0
-static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+static int
+nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
{
- struct nand_chip *active = this;
+ spinlock_t *lock = &chip->controller->lock;
+ wait_queue_head_t *wq = &chip->controller->wq;
+ DECLARE_WAITQUEUE(wait, current);
+ retry:
+ spin_lock(lock);
- DECLARE_WAITQUEUE (wait, current);
-
- /*
- * Grab the lock and see if the device is available
- */
-retry:
/* Hardware controller shared among independend devices */
- if (this->controller) {
- spin_lock (&this->controller->lock);
- if (this->controller->active)
- active = this->controller->active;
- else
- this->controller->active = this;
- spin_unlock (&this->controller->lock);
- }
+ /* Hardware controller shared among independend devices */
+ if (!chip->controller->active)
+ chip->controller->active = chip;
- if (active == this) {
- spin_lock (&this->chip_lock);
- if (this->state == FL_READY) {
- this->state = new_state;
- spin_unlock (&this->chip_lock);
- return;
- }
+ if (chip->controller->active == chip && chip->state == FL_READY) {
+ chip->state = new_state;
+ spin_unlock(lock);
+ return 0;
}
- set_current_state (TASK_UNINTERRUPTIBLE);
- add_wait_queue (&active->wq, &wait);
- spin_unlock (&active->chip_lock);
- schedule ();
- remove_wait_queue (&active->wq, &wait);
+ if (new_state == FL_PM_SUSPENDED) {
+ spin_unlock(lock);
+ return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(wq, &wait);
+ spin_unlock(lock);
+ schedule();
+ remove_wait_queue(wq, &wait);
goto retry;
}
#else
-static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) {}
+static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+{
+ this->state = new_state;
+ return 0;
+}
#endif
/**
* nand_wait - [DEFAULT] wait until the command is done
* @mtd: MTD device structure
- * @this: NAND chip structure
- * @state: state to select the max. timeout value
+ * @chip: NAND chip structure
*
* Wait for command done. This applies to erase and program only
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
- *
-*/
+ */
/* XXX U-BOOT XXX */
#if 0
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- unsigned long timeo = jiffies;
- int status;
+
+ unsigned long timeo = jiffies;
+ int status, state = chip->state;
if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
+ timeo += (HZ * 400) / 1000;
else
- timeo += (HZ * 20) / 1000;
+ timeo += (HZ * 20) / 1000;
+
+ led_trigger_event(nand_led_trigger, LED_FULL);
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
- if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
- this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+ if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
+ chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
else
- this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
while (time_before(jiffies, timeo)) {
- /* Check, if we were interrupted */
- if (this->state != state)
- return 0;
-
- if (this->dev_ready) {
- if (this->dev_ready(mtd))
+ if (chip->dev_ready) {
+ if (chip->dev_ready(mtd))
break;
} else {
- if (this->read_byte(mtd) & NAND_STATUS_READY)
+ if (chip->read_byte(mtd) & NAND_STATUS_READY)
break;
}
- yield ();
+ cond_resched();
}
- status = (int) this->read_byte(mtd);
- return status;
+ led_trigger_event(nand_led_trigger, LED_OFF);
- return 0;
+ status = (int)chip->read_byte(mtd);
+ return status;
}
#else
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long timeo;
+ int state = this->state;
if (state == FL_ERASING)
timeo = (CFG_HZ * 400) / 1000;
@@ -881,478 +868,305 @@
#endif
/**
- * nand_write_page - [GENERIC] write one page
- * @mtd: MTD device structure
- * @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
- * @oob_buf: out of band data buffer
- * @oobsel: out of band selecttion structre
- * @cached: 1 = enable cached programming if supported by chip
- *
- * Nand_page_program function is used for write and writev !
- * This function will always program a full page of data
- * If you call it with a non page aligned buffer, you're lost :)
- *
- * Cached programming is not supported yet.
+ * nand_read_page_raw - [Intern] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
*/
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
+static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
{
- int i, status;
- u_char ecc_code[NAND_MAX_OOBSIZE];
- int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
- uint *oob_config = oobsel->eccpos;
- int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
- int eccbytes = 0;
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
- /* FIXME: Enable cached programming */
- cached = 0;
+/**
+ * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ */
+static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Send command to begin auto page programming */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.read_page_raw(mtd, chip, buf);
- /* Write out complete page of data, take care of eccmode */
- switch (eccmode) {
- /* No ecc, write all */
- case NAND_ECC_NONE:
- printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
- this->write_buf(mtd, this->data_poi, mtd->oobblock);
- break;
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- /* Software ecc 3/256, write all */
- case NAND_ECC_SOFT:
- for (; eccsteps; eccsteps--) {
- this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
- for (i = 0; i < 3; i++, eccidx++)
- oob_buf[oob_config[eccidx]] = ecc_code[i];
- datidx += this->eccsize;
- }
- this->write_buf(mtd, this->data_poi, mtd->oobblock);
- break;
- default:
- eccbytes = this->eccbytes;
- for (; eccsteps; eccsteps--) {
- /* enable hardware ecc logic for write */
- this->enable_hwecc(mtd, NAND_ECC_WRITE);
- this->write_buf(mtd, &this->data_poi[datidx], this->eccsize);
- this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
- for (i = 0; i < eccbytes; i++, eccidx++)
- oob_buf[oob_config[eccidx]] = ecc_code[i];
- /* If the hardware ecc provides syndromes then
- * the ecc code must be written immediately after
- * the data bytes (words) */
- if (this->options & NAND_HWECC_SYNDROME)
- this->write_buf(mtd, ecc_code, eccbytes);
- datidx += this->eccsize;
- }
- break;
- }
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
- /* Write out OOB data */
- if (this->options & NAND_HWECC_SYNDROME)
- this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
- else
- this->write_buf(mtd, oob_buf, mtd->oobsize);
+ eccsteps = chip->ecc.steps;
+ p = buf;
- /* Send command to actually program the data */
- this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1);
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
- if (!cached) {
- /* call wait ready function */
- status = this->waitfunc (mtd, this, FL_WRITING);
- /* See if device thinks it succeeded */
- if (status & 0x01) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "%s: Failed write, page 0x%08x, ",
- __FUNCTION__, page);
- return -EIO;
- }
- } else {
- /* FIXME: Implement cached programming ! */
- /* wait until cache is ready*/
- /* status = this->waitfunc (mtd, this, FL_CACHEDRPG); */
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
}
return 0;
}
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
/**
- * nand_verify_pages - [GENERIC] verify the chip contents after a write
- * @mtd: MTD device structure
- * @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
- * @numpages: number of pages to verify
- * @oob_buf: out of band data buffer
- * @oobsel: out of band selecttion structre
- * @chipnr: number of the current chip
- * @oobmode: 1 = full buffer verify, 0 = ecc only
+ * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
*
- * The NAND device assumes that it is always writing to a cleanly erased page.
- * Hence, it performs its internal write verification only on bits that
- * transitioned from 1 to 0. The device does NOT verify the whole page on a
- * byte by byte basis. It is possible that the page was not completely erased
- * or the page is becoming unusable due to wear. The read with ECC would catch
- * the error later when the ECC page check fails, but we would rather catch
- * it early in the page write stage. Better to write no data than invalid data.
+ * Not for syndrome calculating ecc controllers which need a special oob layout
*/
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
+static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
{
- int i, j, datidx = 0, oobofs = 0, res = -EIO;
- int eccsteps = this->eccsteps;
- int hweccbytes;
- u_char oobdata[64];
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
- hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- /* Send command to read back the first page */
- this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
- for(;;) {
- for (j = 0; j < eccsteps; j++) {
- /* Loop through and verify the data */
- if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
- "Failed write verify, page 0x%08x ",
- __FUNCTION__, page);
- goto out;
- }
- datidx += mtd->eccsize;
- /* Have we a hw generator layout ? */
- if (!hweccbytes)
- continue;
- if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
- "Failed write verify, page 0x%08x ",
- __FUNCTION__, page);
- goto out;
- }
- oobofs += hweccbytes;
+ eccsteps = chip->ecc.steps;
+ p = buf;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+ return 0;
+}
+
+/**
+ * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
}
- /* check, if we must compare all data or if we just have to
- * compare the ecc bytes
- */
- if (oobmode) {
- if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "%s: "
- "Failed write verify, page 0x%08x ",
- __FUNCTION__, page);
- goto out;
+ chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
+ chip->read_buf(mtd, oob, eccbytes);
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->read_buf(mtd, oob, i);
+
+ return 0;
+}
+
+/**
+ * nand_transfer_oob - [Internal] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
+ */
+static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+ struct mtd_oob_ops *ops, size_t len)
+{
+ switch(ops->mode) {
+
+ case MTD_OOB_PLACE:
+ case MTD_OOB_RAW:
+ memcpy(oob, chip->oob_poi + ops->ooboffs, len);
+ return oob + len;
+
+ case MTD_OOB_AUTO: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, roffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for(; free->length && len; free++, len -= bytes) {
+ /* Read request not from offset 0 ? */
+ if (unlikely(roffs)) {
+ if (roffs >= free->length) {
+ roffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + roffs;
+ bytes = min_t(size_t, len,
+ (free->length - roffs));
+ roffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(oob, chip->oob_poi + boffs, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+/**
+ * nand_do_read_ops - [Internal] Read data with ECC
+ *
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
+ *
+ * Internal function. Called with chip held.
+ */
+static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, page, realpage, col, bytes, aligned;
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
+ int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ int sndcmd = 1;
+ int ret = 0;
+ uint32_t readlen = ops->len;
+ uint32_t oobreadlen = ops->ooblen;
+ uint8_t *bufpoi, *oob, *buf;
+
+ stats = mtd->ecc_stats;
+
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
+
+ col = (int)(from & (mtd->writesize - 1));
+
+ buf = ops->datbuf;
+ oob = ops->oobbuf;
+
+ while(1) {
+ bytes = min(mtd->writesize - col, readlen);
+ aligned = (bytes == mtd->writesize);
+
+ /* Is the current page in the buffer ? */
+ if (realpage != chip->pagebuf || oob) {
+ bufpoi = aligned ? buf : chip->buffers->databuf;
+
+ if (likely(sndcmd)) {
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ sndcmd = 0;
+ }
+
+ /* Now read the page into the buffer */
+ if (unlikely(ops->mode == MTD_OOB_RAW))
+ ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ else
+ ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ if (ret < 0)
+ break;
+
+ /* Transfer not aligned data */
+ if (!aligned) {
+ chip->pagebuf = realpage;
+ memcpy(buf, chip->buffers->databuf + col, bytes);
+ }
+
+ buf += bytes;
+
+ if (unlikely(oob)) {
+ /* Raw mode does data:oob:data:oob */
+ if (ops->mode != MTD_OOB_RAW) {
+ int toread = min(oobreadlen,
+ chip->ecc.layout->oobavail);
+ if (toread) {
+ oob = nand_transfer_oob(chip,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
+ } else
+ buf = nand_transfer_oob(chip,
+ buf, ops, mtd->oobsize);
+ }
+
+ if (!(chip->options & NAND_NO_READRDY)) {
+ /*
+ * Apply delay or wait for ready/busy pin. Do
+ * this before the AUTOINCR check, so no
+ * problems arise if a chip which does auto
+ * increment is marked as NOAUTOINCR by the
+ * board driver.
+ */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
}
} else {
- /* Read always, else autoincrement fails */
- this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps);
-
- if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
- int ecccnt = oobsel->eccbytes;
-
- for (i = 0; i < ecccnt; i++) {
- int idx = oobsel->eccpos[i];
- if (oobdata[idx] != oob_buf[oobofs + idx] ) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "%s: Failed ECC write "
- "verify, page 0x%08x, "
- "%6i bytes were succesful\n",
- __FUNCTION__, page, i);
- goto out;
- }
- }
- }
- }
- oobofs += mtd->oobsize - hweccbytes * eccsteps;
- page++;
- numpages--;
-
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- * Do this also before returning, so the chip is
- * ready for the next command.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- while (!this->dev_ready(mtd));
-
- /* All done, return happy */
- if (!numpages)
- return 0;
-
-
- /* Check, if the chip supports auto page increment */
- if (!NAND_CANAUTOINCR(this))
- this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
- }
- /*
- * Terminate the read command. We come here in case of an error
- * So we must issue a reset command.
- */
-out:
- this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
- return res;
-}
-#endif
-
-/**
- * nand_read - [MTD Interface] MTD compability function for nand_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
- *
- * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL
-*/
-static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-{
- return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-}
-
-
-/**
- * nand_read_ecc - [MTD Interface] Read data with ECC
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
- * @oob_buf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
- *
- * NAND read with ECC
- */
-static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-{
- int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
- int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
- struct nand_chip *this = mtd->priv;
- u_char *data_poi, *oob_data = oob_buf;
- u_char ecc_calc[NAND_MAX_OOBSIZE];
- u_char ecc_code[NAND_MAX_OOBSIZE];
- int eccmode, eccsteps;
- unsigned *oob_config;
- int datidx;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
- int eccbytes;
- int compareecc = 1;
- int oobreadlen;
-
-
- MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n",
- (unsigned int) from, (int) len);
-
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_read_ecc: Attempt read beyond end of device\n");
- *retlen = 0;
- return -EINVAL;
- }
-
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd ,FL_READING);
-
- /* use userspace supplied oobinfo, if zero */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
-
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
- oobsel = this->autooob;
-
- eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
- oob_config = oobsel->eccpos;
-
- /* Select the NAND device */
- chipnr = (int)(from >> this->chip_shift);
- this->select_chip(mtd, chipnr);
-
- /* First we calculate the starting page */
- realpage = (int) (from >> this->page_shift);
- page = realpage & this->pagemask;
-
- /* Get raw starting column */
- col = from & (mtd->oobblock - 1);
-
- end = mtd->oobblock;
- ecc = this->eccsize;
- eccbytes = this->eccbytes;
-
- if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
- compareecc = 0;
-
- oobreadlen = mtd->oobsize;
- if (this->options & NAND_HWECC_SYNDROME)
- oobreadlen -= oobsel->eccbytes;
-
- /* Loop until all data read */
- while (read < len) {
-
- int aligned = (!col && (len - read) >= end);
- /*
- * If the read is not page aligned, we have to read into data buffer
- * due to ecc, else we read into return buffer direct
- */
- if (aligned)
- data_poi = &buf[read];
- else
- data_poi = this->data_buf;
-
- /* Check, if we have this page in the buffer
- *
- * FIXME: Make it work when we must provide oob data too,
- * check the usage of data_buf oob field
- */
- if (realpage == this->pagebuf && !oob_buf) {
- /* aligned read ? */
- if (aligned)
- memcpy (data_poi, this->data_buf, end);
- goto readdata;
+ memcpy(buf, chip->buffers->databuf + col, bytes);
+ buf += bytes;
}
- /* Check, if we must send the read command */
- if (sndcmd) {
- this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
- sndcmd = 0;
- }
+ readlen -= bytes;
- /* get oob area, if we have no oob buffer from fs-driver */
- if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
- oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- oob_data = &this->data_buf[end];
-
- eccsteps = this->eccsteps;
-
- switch (eccmode) {
- case NAND_ECC_NONE: { /* No ECC, Read in a page */
-/* XXX U-BOOT XXX */
-#if 0
- static unsigned long lastwhinge = 0;
- if ((lastwhinge / HZ) != (jiffies / HZ)) {
- printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n");
- lastwhinge = jiffies;
- }
-#else
- puts("Reading data from NAND FLASH without ECC is not recommended\n");
-#endif
- this->read_buf(mtd, data_poi, end);
- break;
- }
-
- case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
- this->read_buf(mtd, data_poi, end);
- for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
- this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- break;
-
- default:
- for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
- this->enable_hwecc(mtd, NAND_ECC_READ);
- this->read_buf(mtd, &data_poi[datidx], ecc);
-
- /* HW ecc with syndrome calculation must read the
- * syndrome from flash immidiately after the data */
- if (!compareecc) {
- /* Some hw ecc generators need to know when the
- * syndrome is read from flash */
- this->enable_hwecc(mtd, NAND_ECC_READSYN);
- this->read_buf(mtd, &oob_data[i], eccbytes);
- /* We calc error correction directly, it checks the hw
- * generator for an error, reads back the syndrome and
- * does the error correction on the fly */
- if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
- "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
- ecc_failed++;
- }
- } else {
- this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- }
- }
- break;
- }
-
- /* read oobdata */
- this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
-
- /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
- if (!compareecc)
- goto readoob;
-
- /* Pick the ECC bytes out of the oob data */
- for (j = 0; j < oobsel->eccbytes; j++)
- ecc_code[j] = oob_data[oob_config[j]];
-
- /* correct data, if neccecary */
- for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
- ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
-
- /* Get next chunk of ecc bytes */
- j += eccbytes;
-
- /* Check, if we have a fs supplied oob-buffer,
- * This is the legacy mode. Used by YAFFS1
- * Should go away some day
- */
- if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
- int *p = (int *)(&oob_data[mtd->oobsize]);
- p[i] = ecc_status;
- }
-
- if (ecc_status == -1) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
- "Failed ECC read, page 0x%08x\n",
- page);
- ecc_failed++;
- }
- }
-
- readoob:
- /* check, if we have a fs supplied oob-buffer */
- if (oob_buf) {
- /* without autoplace. Legacy mode used by YAFFS1 */
- switch(oobsel->useecc) {
- case MTD_NANDECC_AUTOPLACE:
- case MTD_NANDECC_AUTOPL_USR:
- /* Walk through the autoplace chunks */
- for (i = 0, j = 0; j < mtd->oobavail; i++) {
- int from = oobsel->oobfree[i][0];
- int num = oobsel->oobfree[i][1];
- memcpy(&oob_buf[oob+j], &oob_data[from], num);
- j+= num;
- }
- oob += mtd->oobavail;
- break;
- case MTD_NANDECC_PLACE:
- /* YAFFS1 legacy mode */
- oob_data += this->eccsteps * sizeof (int);
- default:
- oob_data += mtd->oobsize;
- }
- }
- readdata:
- /* Partial page read, transfer data into fs buffer */
- if (!aligned) {
- for (j = col; j < end && read < len; j++)
- buf[read++] = data_poi[j];
- this->pagebuf = realpage;
- } else
- read += mtd->oobblock;
-
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- while (!this->dev_ready(mtd));
-
- if (read == len)
+ if (!readlen)
break;
/* For subsequent reads align to page boundary. */
@@ -1360,732 +1174,829 @@
/* Increment page address */
realpage++;
- page = realpage & this->pagemask;
+ page = realpage & chip->pagemask;
/* Check, if we cross a chip boundary */
if (!page) {
chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
}
+
/* Check, if the chip supports auto page increment
* or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+ */
+ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
+ ops->retlen = ops->len - (size_t) readlen;
+ if (oob)
+ ops->oobretlen = ops->ooblen - oobreadlen;
- /*
- * Return success, if no ECC failures, else -EBADMSG
- * fs driver will take care of that, because
- * retlen == desired len and result == -EBADMSG
- */
- *retlen = read;
- return ecc_failed ? -EBADMSG : 0;
+ if (ret)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
- * nand_read_oob - [MTD Interface] NAND read out-of-band
+ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
*
- * NAND read out-of-band data from the spare area
+ * Get hold of the chip and call nand_do_read
*/
-static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf)
{
- int i, col, page, chipnr;
- struct nand_chip *this = mtd->priv;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-
- MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n",
- (unsigned int) from, (int) len);
-
- /* Shift to get page */
- page = (int)(from >> this->page_shift);
- chipnr = (int)(from >> this->chip_shift);
-
- /* Mask to get column */
- col = from & (mtd->oobsize - 1);
-
- /* Initialize return length value */
- *retlen = 0;
+ struct nand_chip *chip = mtd->priv;
+ int ret;
/* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_read_oob: Attempt read beyond end of device\n");
- *retlen = 0;
+ if ((from + len) > mtd->size)
return -EINVAL;
- }
+ if (!len)
+ return 0;
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd , FL_READING);
+ nand_get_device(chip, mtd, FL_READING);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->ops.len = len;
+ chip->ops.datbuf = buf;
+ chip->ops.oobbuf = NULL;
- /* Send the read command */
- this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
- /*
- * Read the data, if we read more than one page
- * oob data, let the device transfer the data !
- */
- i = 0;
- while (i < len) {
- int thislen = mtd->oobsize - col;
- thislen = min_t(int, thislen, len);
- this->read_buf(mtd, &buf[i], thislen);
- i += thislen;
+ ret = nand_do_read_ops(mtd, from, &chip->ops);
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- while (!this->dev_ready(mtd));
+ *retlen = chip->ops.retlen;
- /* Read more ? */
- if (i < len) {
- page++;
- col = 0;
-
- /* Check, if we cross a chip boundary */
- if (!(page & this->pagemask)) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
-
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
- /* For subsequent page reads set offset to 0 */
- this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
- }
- }
- }
-
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
-
- /* Return happy */
- *retlen = len;
- return 0;
-}
-
-/**
- * nand_read_raw - [GENERIC] Read raw data including oob into buffer
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @from: offset to read from
- * @len: number of bytes to read
- * @ooblen: number of oob data bytes to read
- *
- * Read raw data including oob into buffer
- */
-int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen)
-{
- struct nand_chip *this = mtd->priv;
- int page = (int) (from >> this->page_shift);
- int chip = (int) (from >> this->chip_shift);
- int sndcmd = 1;
- int cnt = 0;
- int pagesize = mtd->oobblock + mtd->oobsize;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_read_raw: Attempt read beyond end of device\n");
- return -EINVAL;
- }
-
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd , FL_READING);
-
- this->select_chip (mtd, chip);
-
- /* Add requested oob length */
- len += ooblen;
-
- while (len) {
- if (sndcmd)
- this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
- sndcmd = 0;
-
- this->read_buf (mtd, &buf[cnt], pagesize);
-
- len -= pagesize;
- cnt += pagesize;
- page++;
-
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- while (!this->dev_ready(mtd));
-
- /* Check, if the chip supports auto page increment */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
- sndcmd = 1;
- }
-
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
- return 0;
-}
-
-
-/**
- * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
- * @mtd: MTD device structure
- * @fsbuf: buffer given by fs driver
- * @oobsel: out of band selection structre
- * @autoplace: 1 = place given buffer into the oob bytes
- * @numpages: number of pages to prepare
- *
- * Return:
- * 1. Filesystem buffer available and autoplacement is off,
- * return filesystem buffer
- * 2. No filesystem buffer or autoplace is off, return internal
- * buffer
- * 3. Filesystem buffer is given and autoplace selected
- * put data from fs buffer into internal buffer and
- * retrun internal buffer
- *
- * Note: The internal buffer is filled with 0xff. This must
- * be done only once, when no autoplacement happens
- * Autoplacement sets the buffer dirty flag, which
- * forces the 0xff fill before using the buffer again.
- *
-*/
-static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,
- int autoplace, int numpages)
-{
- struct nand_chip *this = mtd->priv;
- int i, len, ofs;
-
- /* Zero copy fs supplied buffer */
- if (fsbuf && !autoplace)
- return fsbuf;
-
- /* Check, if the buffer must be filled with ff again */
- if (this->oobdirty) {
- memset (this->oob_buf, 0xff,
- mtd->oobsize << (this->phys_erase_shift - this->page_shift));
- this->oobdirty = 0;
- }
-
- /* If we have no autoplacement or no fs buffer use the internal one */
- if (!autoplace || !fsbuf)
- return this->oob_buf;
-
- /* Walk through the pages and place the data */
- this->oobdirty = 1;
- ofs = 0;
- while (numpages--) {
- for (i = 0, len = 0; len < mtd->oobavail; i++) {
- int to = ofs + oobsel->oobfree[i][0];
- int num = oobsel->oobfree[i][1];
- memcpy (&this->oob_buf[to], fsbuf, num);
- len += num;
- fsbuf += num;
- }
- ofs += mtd->oobavail;
- }
- return this->oob_buf;
-}
-
-#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-
-/**
- * nand_write - [MTD Interface] compability function for nand_write_ecc
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
- *
- * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL
- *
-*/
-static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-{
- return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-}
-
-/**
- * nand_write_ecc - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
- * @eccbuf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
- *
- * NAND write with ECC
- */
-static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-{
- int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;
- int autoplace = 0, numpages, totalpages;
- struct nand_chip *this = mtd->priv;
- u_char *oobbuf, *bufstart;
- int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
-
- MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n",
- (unsigned int) to, (int) len);
-
- /* Initialize retlen, in case of early exit */
- *retlen = 0;
-
- /* Do not allow write past end of device */
- if ((to + len) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_write_ecc: Attempt to write past end of page\n");
- return -EINVAL;
- }
-
- /* reject writes, which are not page aligned */
- if (NOTALIGNED (to) || NOTALIGNED(len)) {
- printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
- return -EINVAL;
- }
-
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
-
- /* Calculate chipnr */
- chipnr = (int)(to >> this->chip_shift);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd)) {
- printk (KERN_NOTICE "nand_write_ecc: Device is write protected\n");
- goto out;
- }
-
- /* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
-
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
- oobsel = this->autooob;
- autoplace = 1;
- }
- if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- autoplace = 1;
-
- /* Setup variables and oob buffer */
- totalpages = len >> this->page_shift;
- page = (int) (to >> this->page_shift);
- /* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
- this->pagebuf = -1;
-
- /* Set it relative to chip */
- page &= this->pagemask;
- startpage = page;
- /* Calc number of pages we can write in one go */
- numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages);
- oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);
- bufstart = (u_char *)buf;
-
- /* Loop until all data is written */
- while (written < len) {
-
- this->data_poi = (u_char*) &buf[written];
- /* Write one page. If this is the last page to write
- * or the last page in this block, then use the
- * real pageprogram command, else select cached programming
- * if supported by the chip.
- */
- ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
- if (ret) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_write_ecc: write_page failed %d\n", ret);
- goto out;
- }
- /* Next oob page */
- oob += mtd->oobsize;
- /* Update written bytes count */
- written += mtd->oobblock;
- if (written == len)
- goto cmp;
-
- /* Increment page address */
- page++;
-
- /* Have we hit a block boundary ? Then we have to verify and
- * if verify is ok, we have to setup the oob buffer for
- * the next pages.
- */
- if (!(page & (ppblock - 1))){
- int ofs;
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage,
- page - startpage,
- oobbuf, oobsel, chipnr, (eccbuf != NULL));
- if (ret) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: "
- "verify_pages failed %d\n", ret);
- goto out;
- }
- *retlen = written;
- bufstart = (u_char*) &buf[written];
-
- ofs = autoplace ? mtd->oobavail : mtd->oobsize;
- if (eccbuf)
- eccbuf += (page - startpage) * ofs;
- totalpages -= page - startpage;
- numpages = min (totalpages, ppblock);
- page &= this->pagemask;
- startpage = page;
- oob = 0;
- this->oobdirty = 1;
- oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
- autoplace, numpages);
- /* Check, if we cross a chip boundary */
- if (!page) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
- }
- }
- /* Verify the remaining pages */
-cmp:
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage, totalpages,
- oobbuf, oobsel, chipnr, (eccbuf != NULL));
- if (!ret)
- *retlen = written;
- else
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_write_ecc: verify_pages failed %d\n", ret);
-
-out:
- /* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
return ret;
}
+/**
+ * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ if (sndcmd) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ sndcmd = 0;
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return sndcmd;
+}
/**
- * nand_write_oob - [MTD Interface] NAND write out-of-band
+ * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * with syndromes
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size;
+ uint8_t *bufpoi = buf;
+ int i, toread, sndrnd = 0, pos;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
+ for (i = 0; i < chip->ecc.steps; i++) {
+ if (sndrnd) {
+ pos = eccsize + i * (eccsize + chunk);
+ if (mtd->writesize > 512)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1);
+ else
+ chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page);
+ } else
+ sndrnd = 1;
+ toread = min_t(int, length, chunk);
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ if (length > 0)
+ chip->read_buf(mtd, bufpoi, length);
+
+ return 1;
+}
+
+/**
+ * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ int status = 0;
+ const uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, buf, length);
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/**
+ * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash !
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size, length = mtd->oobsize;
+ int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps;
+ const uint8_t *bufpoi = chip->oob_poi;
+
+ /*
+ * data-ecc-data-ecc ... ecc-oob
+ * or
+ * data-pad-ecc-pad-data-pad .... ecc-pad-oob
+ */
+ if (!chip->ecc.prepad && !chip->ecc.postpad) {
+ pos = steps * (eccsize + chunk);
+ steps = 0;
+ } else
+ pos = eccsize;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+ for (i = 0; i < steps; i++) {
+ if (sndcmd) {
+ if (mtd->writesize <= 512) {
+ uint32_t fill = 0xFFFFFFFF;
+
+ len = eccsize;
+ while (len > 0) {
+ int num = min_t(int, len, 4);
+ chip->write_buf(mtd, (uint8_t *)&fill,
+ num);
+ len -= num;
+ }
+ } else {
+ pos = eccsize + i * (eccsize + chunk);
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1);
+ }
+ } else
+ sndcmd = 1;
+ len = min_t(int, length, chunk);
+ chip->write_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ length -= len;
+ }
+ if (length > 0)
+ chip->write_buf(mtd, bufpoi, length);
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/**
+ * nand_do_read_oob - [Intern] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
+ *
+ * NAND read out-of-band data from the spare area
+ */
+static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int page, realpage, chipnr, sndcmd = 1;
+ struct nand_chip *chip = mtd->priv;
+ int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ int readlen = ops->ooblen;
+ int len;
+ uint8_t *buf = ops->oobbuf;
+
+ MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
+ (unsigned long long)from, readlen);
+
+ if (ops->mode == MTD_OOB_AUTO)
+ len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
+
+ if (unlikely(ops->ooboffs >= len)) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt to start read outside oob\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(from >= mtd->size ||
+ ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+ (from >> chip->page_shift)) * len)) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
+ }
+
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ /* Shift to get page */
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
+
+ while(1) {
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+
+ len = min(len, readlen);
+ buf = nand_transfer_oob(chip, buf, ops, len);
+
+ if (!(chip->options & NAND_NO_READRDY)) {
+ /*
+ * Apply delay or wait for ready/busy pin. Do this
+ * before the AUTOINCR check, so no problems arise if a
+ * chip which does auto increment is marked as
+ * NOAUTOINCR by the board driver.
+ */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
+ readlen -= len;
+ if (!readlen)
+ break;
+
+ /* Increment page address */
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+
+ /* Check, if the chip supports auto page increment
+ * or if we have hit a block boundary.
+ */
+ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
+ sndcmd = 1;
+ }
+
+ ops->oobretlen = ops->ooblen;
+ return 0;
+}
+
+/**
+ * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ *
+ * NAND read data and/or out-of-band data
+ */
+static int nand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+
+ /* Do not allow reads past end of device */
+ if (ops->datbuf && (from + ops->len) > mtd->size) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
+ }
+
+ nand_get_device(chip, mtd, FL_READING);
+
+ switch(ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ case MTD_OOB_RAW:
+ break;
+
+ default:
+ goto out;
+ }
+
+ if (!ops->datbuf)
+ ret = nand_do_read_oob(mtd, from, ops);
+ else
+ ret = nand_do_read_ops(mtd, from, ops);
+
+ out:
+ nand_release_device(mtd);
+ return ret;
+}
+
+
+/**
+ * nand_write_page_raw - [Intern] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+/**
+ * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ /* Software ecc calculation */
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ chip->ecc.write_page_raw(mtd, chip, buf);
+}
+
+/**
+ * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+/**
+ * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static void nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ const uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->ecc.calculate(mtd, p, oob);
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->write_buf(mtd, oob, i);
+}
+
+/**
+ * nand_write_page - [REPLACEABLE] write one page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
+ */
+static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+ if (unlikely(raw))
+ chip->ecc.write_page_raw(mtd, chip, buf);
+ else
+ chip->ecc.write_page(mtd, chip, buf);
+
+ /*
+ * Cached progamming disabled for now, Not sure if its worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ */
+ cached = 0;
+
+ if (!cached || !(chip->options & NAND_CACHEPRG)) {
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ }
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /* Send command to read back the data */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ if (chip->verify_buf(mtd, buf, mtd->writesize))
+ return -EIO;
+#endif
+ return 0;
+}
+
+/**
+ * nand_fill_oob - [Internal] Transfer client buffer to oob
+ * @chip: nand chip structure
+ * @oob: oob data buffer
+ * @ops: oob ops structure
+ */
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
+ struct mtd_oob_ops *ops)
+{
+ size_t len = ops->ooblen;
+
+ switch(ops->mode) {
+
+ case MTD_OOB_PLACE:
+ case MTD_OOB_RAW:
+ memcpy(chip->oob_poi + ops->ooboffs, oob, len);
+ return oob + len;
+
+ case MTD_OOB_AUTO: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, woffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for(; free->length && len; free++, len -= bytes) {
+ /* Write request not from offset 0 ? */
+ if (unlikely(woffs)) {
+ if (woffs >= free->length) {
+ woffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + woffs;
+ bytes = min_t(size_t, len,
+ (free->length - woffs));
+ woffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(chip->oob_poi + boffs, oob, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+#define NOTALIGNED(x) (x & (chip->subpagesize - 1)) != 0
+
+/**
+ * nand_do_write_ops - [Internal] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ *
+ * NAND write with ECC
+ */
+static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, realpage, page, blockmask, column;
+ struct nand_chip *chip = mtd->priv;
+ uint32_t writelen = ops->len;
+ uint8_t *oob = ops->oobbuf;
+ uint8_t *buf = ops->datbuf;
+ int ret, subpage;
+
+ ops->retlen = 0;
+ if (!writelen)
+ return 0;
+
+ /* reject writes, which are not page aligned */
+ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
+ printk(KERN_NOTICE "nand_write: "
+ "Attempt to write not page aligned data\n");
+ return -EINVAL;
+ }
+
+ column = to & (mtd->writesize - 1);
+ subpage = column || (writelen & (mtd->writesize - 1));
+
+ if (subpage && oob)
+ return -EINVAL;
+
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ printk (KERN_NOTICE "nand_do_write_ops: Device is write protected\n");
+ return -EIO;
+ }
+
+ realpage = (int)(to >> chip->page_shift);
+ page = realpage & chip->pagemask;
+ blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+
+ /* Invalidate the page cache, when we write to the cached page */
+ if (to <= (chip->pagebuf << chip->page_shift) &&
+ (chip->pagebuf << chip->page_shift) < (to + ops->len))
+ chip->pagebuf = -1;
+
+ /* If we're not given explicit OOB data, let it be 0xFF */
+ if (likely(!oob))
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
+ while(1) {
+ int bytes = mtd->writesize;
+ int cached = writelen > bytes && page != blockmask;
+ uint8_t *wbuf = buf;
+
+ /* Partial page write ? */
+ if (unlikely(column || writelen < (mtd->writesize - 1))) {
+ cached = 0;
+ bytes = min_t(int, bytes - column, (int) writelen);
+ chip->pagebuf = -1;
+ memset(chip->buffers->databuf, 0xff, mtd->writesize);
+ memcpy(&chip->buffers->databuf[column], buf, bytes);
+ wbuf = chip->buffers->databuf;
+ }
+
+ if (unlikely(oob))
+ oob = nand_fill_oob(chip, oob, ops);
+
+ ret = chip->write_page(mtd, chip, wbuf, page, cached,
+ (ops->mode == MTD_OOB_RAW));
+ if (ret)
+ break;
+
+ writelen -= bytes;
+ if (!writelen)
+ break;
+
+ column = 0;
+ buf += bytes;
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+ }
+
+ ops->retlen = ops->len - writelen;
+ if (unlikely(oob))
+ ops->oobretlen = ops->ooblen;
+ return ret;
+}
+
+/**
+ * nand_write - [MTD Interface] NAND write with ECC
* @mtd: MTD device structure
* @to: offset to write to
* @len: number of bytes to write
* @retlen: pointer to variable to store the number of written bytes
* @buf: the data to write
*
+ * NAND write with ECC
+ */
+static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ /* Do not allow reads past end of device */
+ if ((to + len) > mtd->size)
+ return -EINVAL;
+ if (!len)
+ return 0;
+
+ nand_get_device(chip, mtd, FL_WRITING);
+
+ chip->ops.len = len;
+ chip->ops.datbuf = (uint8_t *)buf;
+ chip->ops.oobbuf = NULL;
+
+ ret = nand_do_write_ops(mtd, to, &chip->ops);
+
+ *retlen = chip->ops.retlen;
+
+ nand_release_device(mtd);
+
+ return ret;
+}
+
+/**
+ * nand_do_write_oob - [MTD Interface] NAND write out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ *
* NAND write out-of-band
*/
-static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
- int column, page, status, ret = -EIO, chipnr;
- struct nand_chip *this = mtd->priv;
+ int chipnr, page, status, len;
+ struct nand_chip *chip = mtd->priv;
MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
- (unsigned int) to, (int) len);
+ (unsigned int)to, (int)ops->ooblen);
- /* Shift to get page */
- page = (int) (to >> this->page_shift);
- chipnr = (int) (to >> this->chip_shift);
-
- /* Mask to get column */
- column = to & (mtd->oobsize - 1);
-
- /* Initialize return length value */
- *retlen = 0;
+ if (ops->mode == MTD_OOB_AUTO)
+ len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
/* Do not allow write past end of page */
- if ((column + len) > mtd->oobsize) {
+ if ((ops->ooboffs + ops->ooblen) > len) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
"Attempt to write past end of page\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
-
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
-
- /* Reset the chip. Some chips (like the Toshiba TC5832DC found
- in one of my DiskOnChip 2000 test units) will clear the whole
- data page too if we don't do this. I have no clue why, but
- I seem to have 'fixed' it in the doc2000 driver in
- August 1999. dwmw2. */
- this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd))
- goto out;
-
- /* Invalidate the page cache, if we write to the cached page */
- if (page == this->pagebuf)
- this->pagebuf = -1;
-
- if (NAND_MUST_PAD(this)) {
- /* Write out desired data */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
- if (!ffchars) {
- if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "No memory for padding array, "
- "need %d bytes", mtd->oobsize);
- ret = -ENOMEM;
- goto out;
- }
- memset(ffchars, 0xff, mtd->oobsize);
- }
- /* prepad 0xff for partial programming */
- this->write_buf(mtd, ffchars, column);
- /* write data */
- this->write_buf(mtd, buf, len);
- /* postpad 0xff for partial programming */
- this->write_buf(mtd, ffchars, mtd->oobsize - (len+column));
- } else {
- /* Write out desired data */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask);
- /* write data */
- this->write_buf(mtd, buf, len);
- }
- /* Send command to program the OOB data */
- this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1);
-
- status = this->waitfunc (mtd, this, FL_WRITING);
-
- /* See if device thinks it succeeded */
- if (status & 0x01) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Failed write, page 0x%08x\n", page);
- ret = -EIO;
- goto out;
- }
- /* Return happy */
- *retlen = len;
-
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
- /* Send command to read back the data */
- this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
-
- if (this->verify_buf(mtd, buf, len)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Failed write verify, page 0x%08x\n", page);
- ret = -EIO;
- goto out;
- }
-#endif
- ret = 0;
-out:
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
-
- return ret;
-}
-
-/* XXX U-BOOT XXX */
-#if 0
-/**
- * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc
- * @mtd: MTD device structure
- * @vecs: the iovectors to write
- * @count: number of vectors
- * @to: offset to write to
- * @retlen: pointer to variable to store the number of written bytes
- *
- * NAND write with kvec. This just calls the ecc function
- */
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
- loff_t to, size_t * retlen)
-{
- return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
-}
-
-/**
- * nand_writev_ecc - [MTD Interface] write with iovec with ecc
- * @mtd: MTD device structure
- * @vecs: the iovectors to write
- * @count: number of vectors
- * @to: offset to write to
- * @retlen: pointer to variable to store the number of written bytes
- * @eccbuf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
- *
- * NAND write with iovec with ecc
- */
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
- loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-{
- int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
- int oob, numpages, autoplace = 0, startpage;
- struct nand_chip *this = mtd->priv;
- int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
- u_char *oobbuf, *bufstart;
-
- /* Preset written len for early exit */
- *retlen = 0;
-
- /* Calculate total length of data */
- total_len = 0;
- for (i = 0; i < count; i++)
- total_len += (int) vecs[i].iov_len;
-
- MTDDEBUG (MTD_DEBUG_LEVEL3,
- "nand_writev: to = 0x%08x, len = %i, count = %ld\n",
- (unsigned int) to, (unsigned int) total_len, count);
-
- /* Do not allow write past end of page */
- if ((to + total_len) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_writev: Attempted write past end of device\n");
+ if (unlikely(ops->ooboffs >= len)) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt to start write outside oob\n");
return -EINVAL;
}
- /* reject writes, which are not page aligned */
- if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
- printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
+ /* Do not allow reads past end of device */
+ if (unlikely(to >= mtd->size ||
+ ops->ooboffs + ops->ooblen >
+ ((mtd->size >> chip->page_shift) -
+ (to >> chip->page_shift)) * len)) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt write beyond end of device\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- /* Get the current chip-nr */
- chipnr = (int) (to >> this->chip_shift);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ /* Shift to get page */
+ page = (int)(to >> chip->page_shift);
+
+ /*
+ * Reset the chip. Some chips (like the Toshiba TC5832DC found in one
+ * of my DiskOnChip 2000 test units) will clear the whole data page too
+ * if we don't do this. I have no clue why, but I seem to have 'fixed'
+ * it in the doc2000 driver in August 1999. dwmw2.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
/* Check, if it is write protected */
if (nand_check_wp(mtd))
- goto out;
+ return -EROFS;
- /* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
-
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
- oobsel = this->autooob;
- autoplace = 1;
- }
- if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- autoplace = 1;
-
- /* Setup start page */
- page = (int) (to >> this->page_shift);
/* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
- this->pagebuf = -1;
+ if (page == chip->pagebuf)
+ chip->pagebuf = -1;
- startpage = page & this->pagemask;
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(chip, ops->oobbuf, ops);
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
- /* Loop until all kvec' data has been written */
- len = 0;
- while (count) {
- /* If the given tuple is >= pagesize then
- * write it out from the iov
- */
- if ((vecs->iov_len - len) >= mtd->oobblock) {
- /* Calc number of pages we can write
- * out of this iov in one go */
- numpages = (vecs->iov_len - len) >> this->page_shift;
- /* Do not cross block boundaries */
- numpages = min (ppblock - (startpage & (ppblock - 1)), numpages);
- oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
- bufstart = (u_char *)vecs->iov_base;
- bufstart += len;
- this->data_poi = bufstart;
- oob = 0;
- for (i = 1; i <= numpages; i++) {
- /* Write one page. If this is the last page to write
- * then use the real pageprogram command, else select
- * cached programming if supported by the chip.
- */
- ret = nand_write_page (mtd, this, page & this->pagemask,
- &oobbuf[oob], oobsel, i != numpages);
- if (ret)
- goto out;
- this->data_poi += mtd->oobblock;
- len += mtd->oobblock;
- oob += mtd->oobsize;
- page++;
- }
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- } else {
- /* We must use the internal buffer, read data out of each
- * tuple until we have a full page to write
- */
- int cnt = 0;
- while (cnt < mtd->oobblock) {
- if (vecs->iov_base != NULL && vecs->iov_len)
- this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- }
- this->pagebuf = page;
- this->data_poi = this->data_buf;
- bufstart = this->data_poi;
- numpages = 1;
- oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
- ret = nand_write_page (mtd, this, page & this->pagemask,
- oobbuf, oobsel, 0);
- if (ret)
- goto out;
- page++;
- }
+ if (status)
+ return status;
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
- if (ret)
- goto out;
+ ops->oobretlen = ops->ooblen;
- written += mtd->oobblock * numpages;
- /* All done ? */
- if (!count)
- break;
+ return 0;
+}
- startpage = page & this->pagemask;
- /* Check, if we cross a chip boundary */
- if (!startpage) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
+/**
+ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ */
+static int nand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+
+ /* Do not allow writes past end of device */
+ if (ops->datbuf && (to + ops->len) > mtd->size) {
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
}
- ret = 0;
-out:
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
- *retlen = written;
+ nand_get_device(chip, mtd, FL_WRITING);
+
+ switch(ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ case MTD_OOB_RAW:
+ break;
+
+ default:
+ goto out;
+ }
+
+ if (!ops->datbuf)
+ ret = nand_do_write_oob(mtd, to, ops);
+ else
+ ret = nand_do_write_ops(mtd, to, ops);
+
+ out:
+ nand_release_device(mtd);
return ret;
}
-#endif
/**
* single_erease_cmd - [GENERIC] NAND standard block erase command function
@@ -2094,12 +2005,12 @@
*
* Standard erase command for NAND chips
*/
-static void single_erase_cmd (struct mtd_info *mtd, int page)
+static void single_erase_cmd(struct mtd_info *mtd, int page)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
- this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
}
/**
@@ -2110,15 +2021,15 @@
* AND multi block erase command function
* Erase 4 consecutive blocks
*/
-static void multi_erase_cmd (struct mtd_info *mtd, int page)
+static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
- this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
}
/**
@@ -2128,35 +2039,39 @@
*
* Erase one ore more blocks
*/
-static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
- return nand_erase_nand (mtd, instr, 0);
+ return nand_erase_nand(mtd, instr, 0);
}
+#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_intern - [NAND Interface] erase block(s)
+ * nand_erase_nand - [Internal] erase block(s)
* @mtd: MTD device structure
* @instr: erase instruction
* @allowbbt: allow erasing the bbt area
*
* Erase one ore more blocks
*/
-int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
+int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt)
{
int page, len, status, pages_per_block, ret, chipnr;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
+ int rewrite_bbt[NAND_MAX_CHIPS]={0};
+ unsigned int bbt_masked_page = 0xffffffff;
MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n",
(unsigned int) instr->addr, (unsigned int) instr->len);
/* Start address must align on block boundary */
- if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
+ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
- if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
+ if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"nand_erase: Length not block aligned\n");
return -EINVAL;
@@ -2172,19 +2087,18 @@
instr->fail_addr = 0xffffffff;
/* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_ERASING);
+ nand_get_device(chip, mtd, FL_ERASING);
/* Shift to get first page */
- page = (int) (instr->addr >> this->page_shift);
- chipnr = (int) (instr->addr >> this->chip_shift);
+ page = (int)(instr->addr >> chip->page_shift);
+ chipnr = (int)(instr->addr >> chip->chip_shift);
/* Calculate pages in each block */
- pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
+ pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
/* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, chipnr);
- /* Check the WP bit */
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
@@ -2193,52 +2107,92 @@
goto erase_exit;
}
+ /*
+ * If BBT requires refresh, set the BBT page mask to see if the BBT
+ * should be rewritten. Otherwise the mask is set to 0xffffffff which
+ * can not be matched. This is also done when the bbt is actually
+ * erased to avoid recusrsive updates
+ */
+ if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
+ bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
+
/* Loop through the pages */
len = instr->len;
instr->state = MTD_ERASING;
while (len) {
-#ifndef NAND_ALLOW_ERASE_ALL
- /* Check if we have a bad block, we do not erase bad blocks ! */
- if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) {
- printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
+ /*
+ * heck if we have a bad block, we do not erase bad blocks !
+ */
+ if (nand_block_checkbad(mtd, ((loff_t) page) <<
+ chip->page_shift, 0, allowbbt)) {
+ printk(KERN_WARNING "nand_erase: attempt to erase a "
+ "bad block at page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
-#endif
- /* Invalidate the page cache, if we erase the block which contains
- the current cached page */
- if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
- this->pagebuf = -1;
- this->erase_cmd (mtd, page & this->pagemask);
+ /*
+ * Invalidate the page cache, if we erase the block which
+ * contains the current cached page
+ */
+ if (page <= chip->pagebuf && chip->pagebuf <
+ (page + pages_per_block))
+ chip->pagebuf = -1;
- status = this->waitfunc (mtd, this, FL_ERASING);
+ chip->erase_cmd(mtd, page & chip->pagemask);
+
+ status = chip->waitfunc(mtd, chip);
+
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_ERASING,
+ status, page);
/* See if block erase succeeded */
- if (status & 0x01) {
+ if (status & NAND_STATUS_FAIL) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: "
"Failed erase, page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
- instr->fail_addr = (page << this->page_shift);
+ instr->fail_addr = (page << chip->page_shift);
goto erase_exit;
}
+ /*
+ * If BBT requires refresh, set the BBT rewrite flag to the
+ * page being erased
+ */
+ if (bbt_masked_page != 0xffffffff &&
+ (page & BBT_PAGE_MASK) == bbt_masked_page)
+ rewrite_bbt[chipnr] = (page << chip->page_shift);
+
/* Increment page address and decrement length */
- len -= (1 << this->phys_erase_shift);
+ len -= (1 << chip->phys_erase_shift);
page += pages_per_block;
/* Check, if we cross a chip boundary */
- if (len && !(page & this->pagemask)) {
+ if (len && !(page & chip->pagemask)) {
chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+
+ /*
+ * If BBT requires refresh and BBT-PERCHIP, set the BBT
+ * page mask to see if this BBT should be rewritten
+ */
+ if (bbt_masked_page != 0xffffffff &&
+ (chip->bbt_td->options & NAND_BBT_PERCHIP))
+ bbt_masked_page = chip->bbt_td->pages[chipnr] &
+ BBT_PAGE_MASK;
}
}
instr->state = MTD_ERASE_DONE;
-erase_exit:
+ erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
/* Do call back function */
@@ -2248,6 +2202,23 @@
/* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
+ /*
+ * If BBT requires refresh and erase was successful, rewrite any
+ * selected bad block tables
+ */
+ if (bbt_masked_page == 0xffffffff || ret)
+ return ret;
+
+ for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
+ if (!rewrite_bbt[chipnr])
+ continue;
+ /* update the BBT for chip */
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
+ "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
+ nand_update_bbt(mtd, rewrite_bbt[chipnr]);
+ }
+
/* Return more or less happy */
return ret;
}
@@ -2258,41 +2229,40 @@
*
* Sync is actually a wait for chip ready function
*/
-static void nand_sync (struct mtd_info *mtd)
+static void nand_sync(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
/* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_SYNCING);
+ nand_get_device(chip, mtd, FL_SYNCING);
/* Release it and go back */
- nand_release_device (mtd);
+ nand_release_device(mtd);
}
-
/**
- * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * nand_block_isbad - [MTD Interface] Check if block at offset is bad
* @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @offs: offset relative to mtd start
*/
-static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
/* Check for invalid offset */
- if (ofs > mtd->size)
+ if (offs > mtd->size)
return -EINVAL;
- return nand_block_checkbad (mtd, ofs, 1, 0);
+ return nand_block_checkbad(mtd, offs, 1, 0);
}
/**
- * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
* @mtd: MTD device structure
* @ofs: offset relative to mtd start
*/
-static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
int ret;
if ((ret = nand_block_isbad(mtd, ofs))) {
@@ -2302,419 +2272,556 @@
return ret;
}
- return this->block_markbad(mtd, ofs);
+ return chip->block_markbad(mtd, ofs);
}
/**
+ * nand_suspend - [MTD Interface] Suspend the NAND flash
+ * @mtd: MTD device structure
+ */
+static int nand_suspend(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
+}
+
+/**
+ * nand_resume - [MTD Interface] Resume the NAND flash
+ * @mtd: MTD device structure
+ */
+static void nand_resume(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (chip->state == FL_PM_SUSPENDED)
+ nand_release_device(mtd);
+ else
+ printk(KERN_ERR "nand_resume() called for a chip which is not "
+ "in suspended state\n");
+}
+
+/*
+ * Set default functions
+ */
+static void nand_set_defaults(struct nand_chip *chip, int busw)
+{
+ /* check for proper chip_delay setup, set 20us if not */
+ if (!chip->chip_delay)
+ chip->chip_delay = 20;
+
+ /* check, if a user supplied command function given */
+ if (chip->cmdfunc == NULL)
+ chip->cmdfunc = nand_command;
+
+ /* check, if a user supplied wait function given */
+ if (chip->waitfunc == NULL)
+ chip->waitfunc = nand_wait;
+
+ if (!chip->select_chip)
+ chip->select_chip = nand_select_chip;
+ if (!chip->read_byte)
+ chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+ if (!chip->read_word)
+ chip->read_word = nand_read_word;
+ if (!chip->block_bad)
+ chip->block_bad = nand_block_bad;
+ if (!chip->block_markbad)
+ chip->block_markbad = nand_default_block_markbad;
+ if (!chip->write_buf)
+ chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+ if (!chip->read_buf)
+ chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+ if (!chip->verify_buf)
+ chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+ if (!chip->scan_bbt)
+ chip->scan_bbt = nand_default_bbt;
+
+ if (!chip->controller) {
+ chip->controller = &chip->hwcontrol;
+
+ /* XXX U-BOOT XXX */
+#if 0
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
+#endif
+ }
+
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported
+ */
+static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int busw, int *maf_id)
+{
+ struct nand_flash_dev *type = NULL;
+ int i, dev_id, maf_idx;
+
+ /* Select the device */
+ chip->select_chip(mtd, 0);
+
+ /* Send the command for reading device ID */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read manufacturer and device IDs */
+ *maf_id = chip->read_byte(mtd);
+ dev_id = chip->read_byte(mtd);
+
+ /* Lookup the flash id */
+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+ if (dev_id == nand_flash_ids[i].id) {
+ type = &nand_flash_ids[i];
+ break;
+ }
+ }
+
+ if (!type)
+ return ERR_PTR(-ENODEV);
+
+ if (!mtd->name)
+ mtd->name = type->name;
+
+ chip->chipsize = type->chipsize << 20;
+
+ /* Newer devices have all the information in additional id bytes */
+ if (!type->pagesize) {
+ int extid;
+ /* The 3rd id byte holds MLC / multichip data */
+ chip->cellinfo = chip->read_byte(mtd);
+ /* The 4th id byte is the important one */
+ extid = chip->read_byte(mtd);
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x3);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+
+ } else {
+ /*
+ * Old devices have chip data hardcoded in the device id table
+ */
+ mtd->erasesize = type->erasesize;
+ mtd->writesize = type->pagesize;
+ mtd->oobsize = mtd->writesize / 32;
+ busw = type->options & NAND_BUSWIDTH_16;
+ }
+
+ /* Try to identify manufacturer */
+ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
+ if (nand_manuf_ids[maf_idx].id == *maf_id)
+ break;
+ }
+
+ /*
+ * Check, if buswidth is correct. Hardware drivers should set
+ * chip correct !
+ */
+ if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+ printk(KERN_INFO "NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Calculate the address shift from the page size */
+ chip->page_shift = ffs(mtd->writesize) - 1;
+ /* Convert chipsize to number of pages per chip -1. */
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+
+ chip->bbt_erase_shift = chip->phys_erase_shift =
+ ffs(mtd->erasesize) - 1;
+ chip->chip_shift = ffs(chip->chipsize) - 1;
+
+ /* Set the bad block position */
+ chip->badblockpos = mtd->writesize > 512 ?
+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+
+ /* Get chip options, preserve non chip based options */
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+
+ /*
+ * Set chip as a default. Board drivers can override it, if necessary
+ */
+ chip->options |= NAND_NO_AUTOINCR;
+
+ /* Check if chip is a not a samsung device. Do not clear the
+ * options for chips which are not having an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+
+ /* Check for AND chips with 4 page planes */
+ if (chip->options & NAND_4PAGE_ARRAY)
+ chip->erase_cmd = multi_erase_cmd;
+ else
+ chip->erase_cmd = single_erase_cmd;
+
+ /* Do not replace user supplied command function ! */
+ if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+ chip->cmdfunc = nand_command_lp;
+
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
+ nand_manuf_ids[maf_idx].name, type->name);
+
+ return type;
+}
+
+/**
+ * nand_scan_ident - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
+ *
+ * This is the first phase of the normal nand_scan() function. It
+ * reads the flash ID and sets up MTD fields accordingly.
+ *
+ * The mtd->owner field must be set to the module of the caller.
+ */
+int nand_scan_ident(struct mtd_info *mtd, int maxchips)
+{
+ int i, busw, nand_maf_id;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_flash_dev *type;
+
+ /* Get buswidth to select the correct functions */
+ busw = chip->options & NAND_BUSWIDTH_16;
+ /* Set the default functions */
+ nand_set_defaults(chip, busw);
+
+ /* Read the flash type */
+ type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
+
+ if (IS_ERR(type)) {
+ printk(KERN_WARNING "No NAND device found!!!\n");
+ chip->select_chip(mtd, -1);
+ return PTR_ERR(type);
+ }
+
+ /* Check for a chip array */
+ for (i = 1; i < maxchips; i++) {
+ chip->select_chip(mtd, i);
+ /* Send the command for reading device ID */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+ /* Read manufacturer and device IDs */
+ if (nand_maf_id != chip->read_byte(mtd) ||
+ type->id != chip->read_byte(mtd))
+ break;
+ }
+ if (i > 1)
+ printk(KERN_INFO "%d NAND chips detected\n", i);
+
+ /* Store the number of chips and calc total size for mtd */
+ chip->numchips = i;
+ mtd->size = i * chip->chipsize;
+
+ return 0;
+}
+
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
+ *
+ * This is the second phase of the normal nand_scan() function. It
+ * fills out all the uninitialized function pointers with the defaults
+ * and scans for a bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
+ if (!chip->buffers)
+ return -ENOMEM;
+
+ /* Set the internal oob buffer location, just after the page data */
+ chip->oob_poi = chip->buffers->databuf + mtd->writesize;
+
+ /*
+ * If no default placement scheme is given, select an appropriate one
+ */
+ if (!chip->ecc.layout) {
+ switch (mtd->oobsize) {
+ case 8:
+ chip->ecc.layout = &nand_oob_8;
+ break;
+ case 16:
+ chip->ecc.layout = &nand_oob_16;
+ break;
+ case 64:
+ chip->ecc.layout = &nand_oob_64;
+ break;
+ case 128:
+ chip->ecc.layout = &nand_oob_128;
+ break;
+ default:
+ printk(KERN_WARNING "No oob scheme defined for "
+ "oobsize %d\n", mtd->oobsize);
+/* BUG(); */
+ }
+ }
+
+ if (!chip->write_page)
+ chip->write_page = nand_write_page;
+
+ /*
+ * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * selected and we have 256 byte pagesize fallback to software ECC
+ */
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw;
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_HW:
+ /* Use standard hwecc read page function ? */
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_hwecc;
+ if (!chip->ecc.write_page)
+ chip->ecc.write_page = nand_write_page_hwecc;
+ if (!chip->ecc.read_oob)
+ chip->ecc.read_oob = nand_read_oob_std;
+ if (!chip->ecc.write_oob)
+ chip->ecc.write_oob = nand_write_oob_std;
+
+ case NAND_ECC_HW_SYNDROME:
+ if ((!chip->ecc.calculate || !chip->ecc.correct ||
+ !chip->ecc.hwctl) &&
+ (!chip->ecc.read_page ||
+ chip->ecc.read_page == nand_read_page_hwecc ||
+ !chip->ecc.write_page ||
+ chip->ecc.write_page == nand_write_page_hwecc)) {
+ printk(KERN_WARNING "No ECC functions supplied, "
+ "Hardware ECC not possible\n");
+ BUG();
+ }
+ /* Use standard syndrome read/write page function ? */
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_syndrome;
+ if (!chip->ecc.write_page)
+ chip->ecc.write_page = nand_write_page_syndrome;
+ if (!chip->ecc.read_oob)
+ chip->ecc.read_oob = nand_read_oob_syndrome;
+ if (!chip->ecc.write_oob)
+ chip->ecc.write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= chip->ecc.size)
+ break;
+ printk(KERN_WARNING "%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ case NAND_ECC_SOFT:
+ chip->ecc.calculate = nand_calculate_ecc;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.read_page = nand_read_page_swecc;
+ chip->ecc.write_page = nand_write_page_swecc;
+ chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.write_oob = nand_write_oob_std;
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ break;
+
+ case NAND_ECC_NONE:
+ printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
+ "This is not recommended !!\n");
+ chip->ecc.read_page = nand_read_page_raw;
+ chip->ecc.write_page = nand_write_page_raw;
+ chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.write_oob = nand_write_oob_std;
+ chip->ecc.size = mtd->writesize;
+ chip->ecc.bytes = 0;
+ break;
+
+ default:
+ printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
+ chip->ecc.mode);
+ BUG();
+ }
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ chip->ecc.layout->oobavail = 0;
+ for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+ chip->ecc.layout->oobavail +=
+ chip->ecc.layout->oobfree[i].length;
+ mtd->oobavail = chip->ecc.layout->oobavail;
+
+ /*
+ * Set the number of read / write steps for one page depending on ECC
+ * mode
+ */
+ chip->ecc.steps = mtd->writesize / chip->ecc.size;
+ if(chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+ printk(KERN_WARNING "Invalid ecc parameters\n");
+ BUG();
+ }
+ chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+
+ /*
+ * Allow subpage writes up to ecc.steps. Not possible for MLC
+ * FLASH.
+ */
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+ !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+ switch(chip->ecc.steps) {
+ case 2:
+ mtd->subpage_sft = 1;
+ break;
+ case 4:
+ case 8:
+ mtd->subpage_sft = 2;
+ break;
+ }
+ }
+ chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /* Initialize state */
+ chip->state = FL_READY;
+
+ /* De-select the device */
+ chip->select_chip(mtd, -1);
+
+ /* Invalidate the pagebuffer reference */
+ chip->pagebuf = -1;
+
+ /* Fill in remaining MTD driver data */
+ mtd->type = MTD_NANDFLASH;
+ mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->erase = nand_erase;
+ mtd->point = NULL;
+ mtd->unpoint = NULL;
+ mtd->read = nand_read;
+ mtd->write = nand_write;
+ mtd->read_oob = nand_read_oob;
+ mtd->write_oob = nand_write_oob;
+ mtd->sync = nand_sync;
+ mtd->lock = NULL;
+ mtd->unlock = NULL;
+ mtd->suspend = nand_suspend;
+ mtd->resume = nand_resume;
+ mtd->block_isbad = nand_block_isbad;
+ mtd->block_markbad = nand_block_markbad;
+
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
+
+ /* Check, if we should skip the bad block table scan */
+ if (chip->options & NAND_SKIP_BBTSCAN)
+ chip->options |= NAND_BBT_SCANNED;
+
+ return 0;
+}
+
+/* module_text_address() isn't exported, and it's mostly a pointless
+ test if this is a module _anyway_ -- they'd have to try _really_ hard
+ to call us from in-kernel code if the core NAND support is modular. */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+ module_text_address((unsigned long)__builtin_return_address(0))
+#endif
+
+/**
* nand_scan - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
* @maxchips: Number of chips to scan for
*
- * This fills out all the not initialized function pointers
+ * This fills out all the uninitialized function pointers
* with the defaults.
* The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values. Buffers are allocated if
- * they are not provided by the board driver
+ * filled with the appropriate values.
+ * The mtd->owner field must be set to the module of the caller
*
*/
-int nand_scan (struct mtd_info *mtd, int maxchips)
+int nand_scan(struct mtd_info *mtd, int maxchips)
{
- int i, j, nand_maf_id, nand_dev_id, busw;
- struct nand_chip *this = mtd->priv;
+ int ret;
- /* Get buswidth to select the correct functions*/
- busw = this->options & NAND_BUSWIDTH_16;
-
- /* check for proper chip_delay setup, set 20us if not */
- if (!this->chip_delay)
- this->chip_delay = 20;
-
- /* check, if a user supplied command function given */
- if (this->cmdfunc == NULL)
- this->cmdfunc = nand_command;
-
- /* check, if a user supplied wait function given */
- if (this->waitfunc == NULL)
- this->waitfunc = nand_wait;
-
- if (!this->select_chip)
- this->select_chip = nand_select_chip;
- if (!this->write_byte)
- this->write_byte = busw ? nand_write_byte16 : nand_write_byte;
- if (!this->read_byte)
- this->read_byte = busw ? nand_read_byte16 : nand_read_byte;
- if (!this->write_word)
- this->write_word = nand_write_word;
- if (!this->read_word)
- this->read_word = nand_read_word;
- if (!this->block_bad)
- this->block_bad = nand_block_bad;
- if (!this->block_markbad)
- this->block_markbad = nand_default_block_markbad;
- if (!this->write_buf)
- this->write_buf = busw ? nand_write_buf16 : nand_write_buf;
- if (!this->read_buf)
- this->read_buf = busw ? nand_read_buf16 : nand_read_buf;
- if (!this->verify_buf)
- this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
- if (!this->scan_bbt)
- this->scan_bbt = nand_default_bbt;
-
- /* Select the device */
- this->select_chip(mtd, 0);
-
- /* Send the command for reading device ID */
- this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
-
- /* Read manufacturer and device IDs */
- nand_maf_id = this->read_byte(mtd);
- nand_dev_id = this->read_byte(mtd);
-
- /* Print and store flash device information */
- for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-
- if (nand_dev_id != nand_flash_ids[i].id)
- continue;
-
- if (!mtd->name) mtd->name = nand_flash_ids[i].name;
- this->chipsize = nand_flash_ids[i].chipsize << 20;
-
- /* New devices have all the information in additional id bytes */
- if (!nand_flash_ids[i].pagesize) {
- int extid;
- /* The 3rd id byte contains non relevant data ATM */
- extid = this->read_byte(mtd);
- /* The 4th id byte is the important one */
- extid = this->read_byte(mtd);
- /* Calc pagesize */
- mtd->oobblock = 1024 << (extid & 0x3);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-
- } else {
- /* Old devices have this data hardcoded in the
- * device id table */
- mtd->erasesize = nand_flash_ids[i].erasesize;
- mtd->oobblock = nand_flash_ids[i].pagesize;
- mtd->oobsize = mtd->oobblock / 32;
- busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
- }
-
- /* Check, if buswidth is correct. Hardware drivers should set
- * this correct ! */
- if (busw != (this->options & NAND_BUSWIDTH_16)) {
- printk (KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
- nand_manuf_ids[i].name , mtd->name);
- printk (KERN_WARNING
- "NAND bus width %d instead %d bit\n",
- (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
- this->select_chip(mtd, -1);
- return 1;
- }
-
- /* Calculate the address shift from the page size */
- this->page_shift = ffs(mtd->oobblock) - 1;
- this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
- this->chip_shift = ffs(this->chipsize) - 1;
-
- /* Set the bad block position */
- this->badblockpos = mtd->oobblock > 512 ?
- NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-
- /* Get chip options, preserve non chip based options */
- this->options &= ~NAND_CHIPOPTIONS_MSK;
- this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
- /* Set this as a default. Board drivers can override it, if neccecary */
- this->options |= NAND_NO_AUTOINCR;
- /* Check if this is a not a samsung device. Do not clear the options
- * for chips which are not having an extended id.
- */
- if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
- this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-
- /* Check for AND chips with 4 page planes */
- if (this->options & NAND_4PAGE_ARRAY)
- this->erase_cmd = multi_erase_cmd;
- else
- this->erase_cmd = single_erase_cmd;
-
- /* Do not replace user supplied command function ! */
- if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
- this->cmdfunc = nand_command_lp;
-
- /* Try to identify manufacturer */
- for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
- if (nand_manuf_ids[j].id == nand_maf_id)
- break;
- }
- break;
- }
-
- if (!nand_flash_ids[i].name) {
-#ifndef CFG_NAND_QUIET_TEST
- printk (KERN_WARNING "No NAND device found!!!\n");
-#endif
- this->select_chip(mtd, -1);
- return 1;
- }
-
- for (i=1; i < maxchips; i++) {
- this->select_chip(mtd, i);
-
- /* Send the command for reading device ID */
- this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
-
- /* Read manufacturer and device IDs */
- if (nand_maf_id != this->read_byte(mtd) ||
- nand_dev_id != this->read_byte(mtd))
- break;
- }
- if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
-
- /* Allocate buffers, if neccecary */
- if (!this->oob_buf) {
- size_t len;
- len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
- this->oob_buf = kmalloc (len, GFP_KERNEL);
- if (!this->oob_buf) {
- printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
- return -ENOMEM;
- }
- this->options |= NAND_OOBBUF_ALLOC;
- }
-
- if (!this->data_buf) {
- size_t len;
- len = mtd->oobblock + mtd->oobsize;
- this->data_buf = kmalloc (len, GFP_KERNEL);
- if (!this->data_buf) {
- if (this->options & NAND_OOBBUF_ALLOC)
- kfree (this->oob_buf);
- printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
- return -ENOMEM;
- }
- this->options |= NAND_DATABUF_ALLOC;
- }
-
- /* Store the number of chips and calc total size for mtd */
- this->numchips = i;
- mtd->size = i * this->chipsize;
- /* Convert chipsize to number of pages per chip -1. */
- this->pagemask = (this->chipsize >> this->page_shift) - 1;
- /* Preset the internal oob buffer */
- memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-
- /* If no default placement scheme is given, select an
- * appropriate one */
- if (!this->autooob) {
- /* Select the appropriate default oob placement scheme for
- * placement agnostic filesystems */
- switch (mtd->oobsize) {
- case 8:
- this->autooob = &nand_oob_8;
- break;
- case 16:
- this->autooob = &nand_oob_16;
- break;
- case 64:
- this->autooob = &nand_oob_64;
- break;
- case 128:
- this->autooob = &nand_oob_128;
- break;
- default:
- printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
- mtd->oobsize);
-/* BUG(); */
- }
- }
-
- /* The number of bytes available for the filesystem to place fs dependend
- * oob data */
- mtd->oobavail = 0;
- for (i=0; this->autooob->oobfree[i][1]; i++)
- mtd->oobavail += this->autooob->oobfree[i][1];
-
- /*
- * check ECC mode, default to software
- * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
- * fallback to software ECC
- */
- this->eccsize = 256; /* set default eccsize */
- this->eccbytes = 3;
-
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- if (mtd->oobblock < 2048) {
- printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
- mtd->oobblock);
- this->eccmode = NAND_ECC_SOFT;
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- } else
- this->eccsize = 2048;
- break;
-
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW6_512:
- case NAND_ECC_HW8_512:
- if (mtd->oobblock == 256) {
- printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
- this->eccmode = NAND_ECC_SOFT;
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- } else
- this->eccsize = 512; /* set eccsize to 512 */
- break;
-
- case NAND_ECC_HW3_256:
- break;
-
- case NAND_ECC_NONE:
- printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
- this->eccmode = NAND_ECC_NONE;
- break;
-
- case NAND_ECC_SOFT:
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- break;
-
- default:
- printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-/* BUG(); */
- }
-
- /* Check hardware ecc function availability and adjust number of ecc bytes per
- * calculation step
- */
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- this->eccbytes += 4;
- case NAND_ECC_HW8_512:
- this->eccbytes += 2;
- case NAND_ECC_HW6_512:
- this->eccbytes += 3;
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW3_256:
- if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
- break;
- printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
-/* BUG(); */
- }
-
- mtd->eccsize = this->eccsize;
-
- /* Set the number of read / write steps for one page to ensure ECC generation */
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- this->eccsteps = mtd->oobblock / 2048;
- break;
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW6_512:
- case NAND_ECC_HW8_512:
- this->eccsteps = mtd->oobblock / 512;
- break;
- case NAND_ECC_HW3_256:
- case NAND_ECC_SOFT:
- this->eccsteps = mtd->oobblock / 256;
- break;
-
- case NAND_ECC_NONE:
- this->eccsteps = 1;
- break;
- }
-
-/* XXX U-BOOT XXX */
+ /* Many callers got this wrong, so check for it for a while... */
+ /* XXX U-BOOT XXX */
#if 0
- /* Initialize state, waitqueue and spinlock */
- this->state = FL_READY;
- init_waitqueue_head (&this->wq);
- spin_lock_init (&this->chip_lock);
+ if (!mtd->owner && caller_is_module()) {
+ printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ BUG();
+ }
#endif
- /* De-select the device */
- this->select_chip(mtd, -1);
-
- /* Invalidate the pagebuffer reference */
- this->pagebuf = -1;
-
- /* Fill in remaining MTD driver data */
- mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
- mtd->ecctype = MTD_ECC_SW;
- mtd->erase = nand_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
- mtd->read = nand_read;
- mtd->write = nand_write;
- mtd->read_ecc = nand_read_ecc;
- mtd->write_ecc = nand_write_ecc;
- mtd->read_oob = nand_read_oob;
- mtd->write_oob = nand_write_oob;
-/* XXX U-BOOT XXX */
-#if 0
- mtd->readv = NULL;
- mtd->writev = nand_writev;
- mtd->writev_ecc = nand_writev_ecc;
-#endif
- mtd->sync = nand_sync;
-/* XXX U-BOOT XXX */
-#if 0
- mtd->lock = NULL;
- mtd->unlock = NULL;
- mtd->suspend = NULL;
- mtd->resume = NULL;
-#endif
- mtd->block_isbad = nand_block_isbad;
- mtd->block_markbad = nand_block_markbad;
-
- /* and make the autooob the default one */
- memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-/* XXX U-BOOT XXX */
-#if 0
- mtd->owner = THIS_MODULE;
-#endif
- /* Build bad block table */
- return this->scan_bbt (mtd);
+ ret = nand_scan_ident(mtd, maxchips);
+ if (!ret)
+ ret = nand_scan_tail(mtd);
+ return ret;
}
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
* @mtd: MTD device structure
- */
-void nand_release (struct mtd_info *mtd)
+*/
+void nand_release(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
#ifdef CONFIG_MTD_PARTITIONS
/* Deregister partitions */
- del_mtd_partitions (mtd);
+ del_mtd_partitions(mtd);
#endif
/* Deregister the device */
-/* XXX U-BOOT XXX */
+ /* XXX U-BOOT XXX */
#if 0
- del_mtd_device (mtd);
+ del_mtd_device(mtd);
#endif
- /* Free bad block table memory, if allocated */
- if (this->bbt)
- kfree (this->bbt);
- /* Buffer allocated by nand_scan ? */
- if (this->options & NAND_OOBBUF_ALLOC)
- kfree (this->oob_buf);
- /* Buffer allocated by nand_scan ? */
- if (this->options & NAND_DATABUF_ALLOC)
- kfree (this->data_buf);
+
+ /* Free bad block table memory */
+ kfree(chip->bbt);
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ kfree(chip->buffers);
}
+/* XXX U-BOOT XXX */
+#if 0
+EXPORT_SYMBOL_GPL(nand_scan);
+EXPORT_SYMBOL_GPL(nand_scan_ident);
+EXPORT_SYMBOL_GPL(nand_scan_tail);
+EXPORT_SYMBOL_GPL(nand_release);
+
+static int __init nand_base_init(void)
+{
+ led_trigger_register_simple("nand-disk", &nand_led_trigger);
+ return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+ led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");
#endif
+
+#endif
+
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index a97743b..8447947 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,7 +6,7 @@
*
* Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
*
- * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
+ * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -48,7 +48,7 @@
*
* Following assumptions are made:
* - bbts start at a page boundary, if autolocated on a block boundary
- * - the space neccecary for a bbt in FLASH does not exceed a block boundary
+ * - the space necessary for a bbt in FLASH does not exceed a block boundary
*
*/
@@ -63,6 +63,19 @@
#include <asm/errno.h>
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#endif
+
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
* @buf: the buffer to search
@@ -76,9 +89,9 @@
* pattern area contain 0xff
*
*/
-static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
- int i, end;
+ int i, end = 0;
uint8_t *p = buf;
end = paglen + td->offs;
@@ -96,9 +109,9 @@
return -1;
}
- p += td->len;
- end += td->len;
if (td->options & NAND_BBT_SCANEMPTY) {
+ p += td->len;
+ end += td->len;
for (i = end; i < len; i++) {
if (*p++ != 0xff)
return -1;
@@ -108,6 +121,29 @@
}
/**
+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers. Same as check_pattern, but
+ * no optional empty check
+ *
+*/
+static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
+{
+ int i;
+ uint8_t *p = buf;
+
+ /* Compare the pattern */
+ for (i = 0; i < td->len; i++) {
+ if (p[td->offs + i] != td->pattern[i])
+ return -1;
+ }
+ return 0;
+}
+
+/**
* read_bbt - [GENERIC] Read the bad block table starting from page
* @mtd: MTD device structure
* @buf: temporary buffer
@@ -120,8 +156,8 @@
* Read the bad block table starting from page.
*
*/
-static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
- int bits, int offs, int reserved_block_code)
+static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
+ int bits, int offs, int reserved_block_code)
{
int res, i, j, act = 0;
struct nand_chip *this = mtd->priv;
@@ -130,17 +166,17 @@
uint8_t msk = (uint8_t) ((1 << bits) - 1);
totlen = (num * bits) >> 3;
- from = ((loff_t)page) << this->page_shift;
+ from = ((loff_t) page) << this->page_shift;
while (totlen) {
- len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
- res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
+ len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk (KERN_INFO "nand_bbt: Error reading bad block table\n");
+ printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
return res;
}
- printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
+ printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
@@ -150,22 +186,23 @@
uint8_t tmp = (dat >> j) & msk;
if (tmp == msk)
continue;
- if (reserved_block_code &&
- (tmp == reserved_block_code)) {
- printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ if (reserved_block_code && (tmp == reserved_block_code)) {
+ printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
+ ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+ mtd->ecc_stats.bbtblocks++;
continue;
}
/* Leave it for now, if its matured we can move this
* message to MTD_DEBUG_LEVEL0 */
- printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
+ ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
/* Factory marked bad or worn out ? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+ mtd->ecc_stats.badblocks++;
}
}
totlen -= len;
@@ -185,7 +222,7 @@
* Read the bad block table for all chips starting at a given page
* We assume that the bbt bits are in consecutive order.
*/
-static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
int res = 0, i;
@@ -209,6 +246,42 @@
return 0;
}
+/*
+ * Scan read raw data from flash
+ */
+static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ size_t len)
+{
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_RAW;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+ ops.datbuf = buf;
+ ops.len = len;
+
+ return mtd->read_oob(mtd, offs, &ops);
+}
+
+/*
+ * Scan write data with oob to flash
+ */
+static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
+ uint8_t *buf, uint8_t *oob)
+{
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.datbuf = buf;
+ ops.oobbuf = oob;
+ ops.len = len;
+
+ return mtd->write_oob(mtd, offs, &ops);
+}
+
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
* @mtd: MTD device structure
@@ -220,28 +293,84 @@
* We assume that the bbt bits are in consecutive order.
*
*/
-static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td,
- struct nand_bbt_descr *md)
+static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
struct nand_chip *this = mtd->priv;
/* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
- nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- td->version[0] = buf[mtd->oobblock + td->veroffs];
- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
+ scan_read_raw(mtd, buf, td->pages[0] << this->page_shift,
+ mtd->writesize);
+ td->version[0] = buf[mtd->writesize + td->veroffs];
+ printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
- nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- md->version[0] = buf[mtd->oobblock + md->veroffs];
- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
+ scan_read_raw(mtd, buf, md->pages[0] << this->page_shift,
+ mtd->writesize);
+ md->version[0] = buf[mtd->writesize + md->veroffs];
+ printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
-
return 1;
}
+/*
+ * Scan a given block full
+ */
+static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
+ loff_t offs, uint8_t *buf, size_t readlen,
+ int scanlen, int len)
+{
+ int ret, j;
+
+ ret = scan_read_raw(mtd, buf, offs, readlen);
+ if (ret)
+ return ret;
+
+ for (j = 0; j < len; j++, buf += scanlen) {
+ if (check_pattern(buf, scanlen, mtd->writesize, bd))
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Scan a given block partially
+ */
+static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
+ loff_t offs, uint8_t *buf, int len)
+{
+ struct mtd_oob_ops ops;
+ int j, ret;
+
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
+
+ for (j = 0; j < len; j++) {
+ /*
+ * Read the full oob until read_oob is fixed to
+ * handle single byte reads for 16 bit
+ * buswidth
+ */
+ ret = mtd->read_oob(mtd, offs, &ops);
+ if (ret)
+ return ret;
+
+ if (check_short_pattern(buf, bd))
+ return 1;
+
+ offs += mtd->writesize;
+ }
+ return 0;
+}
+
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
* @mtd: MTD device structure
@@ -253,13 +382,16 @@
* Create a bad block table by scanning the device
* for the given good/bad block identify pattern
*/
-static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
+static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *bd, int chip)
{
struct nand_chip *this = mtd->priv;
- int i, j, numblocks, len, scanlen;
+ int i, numblocks, len, scanlen;
int startblock;
loff_t from;
- size_t readlen, ooblen;
+ size_t readlen;
+
+ MTDDEBUG (MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
@@ -269,21 +401,28 @@
else
len = 1;
}
- scanlen = mtd->oobblock + mtd->oobsize;
- readlen = len * mtd->oobblock;
- ooblen = len * mtd->oobsize;
+
+ if (!(bd->options & NAND_BBT_SCANEMPTY)) {
+ /* We need only read few bytes from the OOB area */
+ scanlen = 0;
+ readlen = bd->len;
+ } else {
+ /* Full page content should be read */
+ scanlen = mtd->writesize + mtd->oobsize;
+ readlen = len * mtd->writesize;
+ }
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
- * makes shifting and masking less painful */
+ /* Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
- chip + 1, this->numchips);
- return;
+ printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ chip + 1, this->numchips);
+ return -EINVAL;
}
numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
startblock = chip * numblocks;
@@ -292,16 +431,29 @@
}
for (i = startblock; i < numblocks;) {
- nand_read_raw (mtd, buf, from, readlen, ooblen);
- for (j = 0; j < len; j++) {
- if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
- this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- break;
- }
+ int ret;
+
+ if (bd->options & NAND_BBT_SCANALLPAGES)
+ ret = scan_block_full(mtd, bd, from, buf, readlen,
+ scanlen, len);
+ else
+ ret = scan_block_fast(mtd, bd, from, buf, len);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret) {
+ this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+ MTDDEBUG (MTD_DEBUG_LEVEL0,
+ "Bad eraseblock %d at 0x%08x\n",
+ i >> 1, (unsigned int)from);
+ mtd->ecc_stats.badblocks++;
}
+
i += 2;
from += (1 << this->bbt_erase_shift);
}
+ return 0;
}
/**
@@ -316,22 +468,23 @@
* block.
* If the option NAND_BBT_PERCHIP is given, each chip is searched
* for a bbt, which contains the bad block information of this chip.
- * This is neccecary to provide support for certain DOC devices.
+ * This is necessary to provide support for certain DOC devices.
*
* The bbt ident pattern resides in the oob area of the first page
* in a block.
*/
-static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, chips;
int bits, startblock, block, dir;
- int scanlen = mtd->oobblock + mtd->oobsize;
+ int scanlen = mtd->writesize + mtd->oobsize;
int bbtblocks;
+ int blocktopage = this->bbt_erase_shift - this->page_shift;
/* Search direction top -> down ? */
if (td->options & NAND_BBT_LASTBLOCK) {
- startblock = (mtd->size >> this->bbt_erase_shift) -1;
+ startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
} else {
startblock = 0;
@@ -357,13 +510,16 @@
td->pages[i] = -1;
/* Scan the maximum number of blocks */
for (block = 0; block < td->maxblocks; block++) {
+
int actblock = startblock + dir * block;
+ loff_t offs = actblock << this->bbt_erase_shift;
+
/* Read first page */
- nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
- if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
- td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
+ scan_read_raw(mtd, buf, offs, mtd->writesize);
+ if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
+ td->pages[i] = actblock << blocktopage;
if (td->options & NAND_BBT_VERSION) {
- td->version[i] = buf[mtd->oobblock + td->veroffs];
+ td->version[i] = buf[mtd->writesize + td->veroffs];
}
break;
}
@@ -373,9 +529,10 @@
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk (KERN_WARNING "Bad block table not found for chip %d\n", i);
+ printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
else
- printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
+ printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
+ td->version[i]);
}
return 0;
}
@@ -389,21 +546,19 @@
*
* Search and read the bad block table(s)
*/
-static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
- search_bbt (mtd, buf, td);
+ search_bbt(mtd, buf, td);
/* Search the mirror table */
if (md)
- search_bbt (mtd, buf, md);
+ search_bbt(mtd, buf, md);
/* Force result check */
return 1;
}
-
/**
* write_bbt - [GENERIC] (Re)write the bad block table
*
@@ -416,25 +571,31 @@
* (Re)write the bad block table
*
*/
-static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
+static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md,
+ int chipsel)
{
struct nand_chip *this = mtd->priv;
- struct nand_oobinfo oobinfo;
struct erase_info einfo;
int i, j, res, chip = 0;
int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
- int nrchips, bbtoffs, pageoffs;
+ int nrchips, bbtoffs, pageoffs, ooboffs;
uint8_t msk[4];
uint8_t rcode = td->reserved_block_code;
size_t retlen, len = 0;
loff_t to;
+ struct mtd_oob_ops ops;
+
+ ops.ooblen = mtd->oobsize;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
if (!rcode)
rcode = 0xff;
/* Write bad block table per chip rather than per device ? */
if (td->options & NAND_BBT_PERCHIP) {
- numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
+ numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
/* Full device write or specific chip ? */
if (chipsel == -1) {
nrchips = this->numchips;
@@ -443,7 +604,7 @@
chip = chipsel;
}
} else {
- numblocks = (int) (mtd->size >> this->bbt_erase_shift);
+ numblocks = (int)(mtd->size >> this->bbt_erase_shift);
nrchips = 1;
}
@@ -472,27 +633,38 @@
for (i = 0; i < td->maxblocks; i++) {
int block = startblock + dir * i;
/* Check, if the block is bad */
- switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) {
+ switch ((this->bbt[block >> 2] >>
+ (2 * (block & 0x03))) & 0x03) {
case 0x01:
case 0x03:
continue;
}
- page = block << (this->bbt_erase_shift - this->page_shift);
+ page = block <<
+ (this->bbt_erase_shift - this->page_shift);
/* Check, if the block is used by the mirror table */
if (!md || md->pages[chip] != page)
goto write;
}
- printk (KERN_ERR "No space left to write bad block table\n");
+ printk(KERN_ERR "No space left to write bad block table\n");
return -ENOSPC;
-write:
+ write:
/* Set up shift count and masks for the flash table */
bits = td->options & NAND_BBT_NRBITS_MSK;
+ msk[2] = ~rcode;
switch (bits) {
- case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break;
- case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break;
- case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break;
- case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
+ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x01;
+ break;
+ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x03;
+ break;
+ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
+ msk[3] = 0x0f;
+ break;
+ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
+ msk[3] = 0xff;
+ break;
default: return -EINVAL;
}
@@ -500,82 +672,92 @@
to = ((loff_t) page) << this->page_shift;
- memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
- oobinfo.useecc = MTD_NANDECC_PLACEONLY;
-
/* Must we save the block contents ? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
- res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+ res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n");
+ printk(KERN_INFO "nand_bbt: Error "
+ "reading block for writing "
+ "the bad block table\n");
return res;
}
- printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n");
+ printk(KERN_WARNING "nand_bbt: ECC error "
+ "while reading block for writing "
+ "bad block table\n");
}
+ /* Read oob data */
+ ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
+ ops.oobbuf = &buf[len];
+ res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
+ if (res < 0 || ops.oobretlen != ops.ooblen)
+ goto outerr;
+
/* Calc the byte offset in the buffer */
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset (&buf[offs], 0xff, (size_t)(numblocks >> sft));
- /* Preset the bbt's oob area with 0xff */
- memset (&buf[len + pageoffs * mtd->oobsize], 0xff,
- ((len >> this->page_shift) - pageoffs) * mtd->oobsize);
- if (td->options & NAND_BBT_VERSION) {
- buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip];
- }
+ memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ ooboffs = len + (pageoffs * mtd->oobsize);
+
} else {
/* Calc length */
len = (size_t) (numblocks >> sft);
/* Make it page aligned ! */
- len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1);
+ len = (len + (mtd->writesize - 1)) &
+ ~(mtd->writesize - 1);
/* Preset the buffer with 0xff */
- memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize);
+ memset(buf, 0xff, len +
+ (len >> this->page_shift)* mtd->oobsize);
offs = 0;
+ ooboffs = len;
/* Pattern is located in oob area of first page */
- memcpy (&buf[len + td->offs], td->pattern, td->len);
- if (td->options & NAND_BBT_VERSION) {
- buf[len + td->veroffs] = td->version[chip];
- }
+ memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
}
+ if (td->options & NAND_BBT_VERSION)
+ buf[ooboffs + td->veroffs] = td->version[chip];
+
/* walk through the memory table */
- for (i = 0; i < numblocks; ) {
+ for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
- for (j = 0; j < 4; j++ , i++) {
+ for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
/* Do not store the reserved bbt blocks ! */
- buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt);
+ buf[offs + (i >> sft)] &=
+ ~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
}
}
- memset (&einfo, 0, sizeof (einfo));
+ memset(&einfo, 0, sizeof(einfo));
einfo.mtd = mtd;
- einfo.addr = (unsigned long) to;
+ einfo.addr = (unsigned long)to;
einfo.len = 1 << this->bbt_erase_shift;
- res = nand_erase_nand (mtd, &einfo, 1);
- if (res < 0) {
- printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
- return res;
- }
+ res = nand_erase_nand(mtd, &einfo, 1);
+ if (res < 0)
+ goto outerr;
- res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
- if (res < 0) {
- printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
- return res;
- }
- printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n",
- (unsigned int) to, td->version[chip]);
+ res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
+ if (res < 0)
+ goto outerr;
+
+ printk(KERN_DEBUG "Bad block table written to 0x%08x, version "
+ "0x%02X\n", (unsigned int)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
}
return 0;
+
+ outerr:
+ printk(KERN_WARNING
+ "nand_bbt: Error while writing bad block table %d\n", res);
+ return res;
}
/**
@@ -586,29 +768,27 @@
* The function creates a memory based bbt by scanning the device
* for manufacturer / software marked good / bad blocks
*/
-static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
- /* Ensure that we only scan for the pattern and nothing else */
- bd->options = 0;
- create_bbt (mtd, this->data_buf, bd, -1);
- return 0;
+ bd->options &= ~NAND_BBT_SCANEMPTY;
+ return create_bbt(mtd, this->buffers->databuf, bd, -1);
}
/**
- * check_create - [GENERIC] create and write bbt(s) if neccecary
+ * check_create - [GENERIC] create and write bbt(s) if necessary
* @mtd: MTD device structure
* @buf: temporary buffer
* @bd: descriptor for the good/bad block search pattern
*
* The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if neccecary
- * Creation is neccecary if no bbt was found for the chip/device
- * Update is neccecary if one of the tables is missing or the
+ * and creates / updates the bbt(s) if necessary
+ * Creation is necessary if no bbt was found for the chip/device
+ * Update is necessary if one of the tables is missing or the
* version nr. of one table is less than the other
*/
-static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
int i, chips, writeops, chipsel, res;
struct nand_chip *this = mtd->priv;
@@ -676,35 +856,35 @@
rd = td;
goto writecheck;
}
-create:
+ create:
/* Create the bad block table by scanning the device ? */
if (!(td->options & NAND_BBT_CREATE))
continue;
/* Create the table in memory by scanning the chip(s) */
- create_bbt (mtd, buf, bd, chipsel);
+ create_bbt(mtd, buf, bd, chipsel);
td->version[i] = 1;
if (md)
md->version[i] = 1;
-writecheck:
+ writecheck:
/* read back first ? */
if (rd)
- read_abs_bbt (mtd, buf, rd, chipsel);
+ read_abs_bbt(mtd, buf, rd, chipsel);
/* If they weren't versioned, read both. */
if (rd2)
- read_abs_bbt (mtd, buf, rd2, chipsel);
+ read_abs_bbt(mtd, buf, rd2, chipsel);
/* Write the bad block table to the device ? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, td, md, chipsel);
+ res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
/* Write the mirror bad block table to the device ? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, md, td, chipsel);
+ res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
return res;
}
@@ -721,7 +901,7 @@
* accidental erasures / writes. The regions are identified by
* the mark 0x02.
*/
-static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
+static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
@@ -739,7 +919,8 @@
for (i = 0; i < chips; i++) {
if ((td->options & NAND_BBT_ABSPAGE) ||
!(td->options & NAND_BBT_WRITE)) {
- if (td->pages[i] == -1) continue;
+ if (td->pages[i] == -1)
+ continue;
block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
block <<= 1;
oldval = this->bbt[(block >> 3)];
@@ -759,7 +940,8 @@
oldval = this->bbt[(block >> 3)];
newval = oldval | (0x2 << (block & 0x06));
this->bbt[(block >> 3)] = newval;
- if (oldval != newval) update = 1;
+ if (oldval != newval)
+ update = 1;
block += 2;
}
/* If we want reserved blocks to be recorded to flash, and some
@@ -784,7 +966,7 @@
* by calling the nand_free_bbt function.
*
*/
-int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
int len, res = 0;
@@ -793,53 +975,56 @@
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) */
- this->bbt = kmalloc (len, GFP_KERNEL);
+ /* Allocate memory (2bit per block) and clear the memory bad block table */
+ this->bbt = kzalloc(len, GFP_KERNEL);
if (!this->bbt) {
- printk (KERN_ERR "nand_scan_bbt: Out of memory\n");
+ printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
return -ENOMEM;
}
- /* Clear the memory bad block table */
- memset (this->bbt, 0x00, len);
/* If no primary table decriptor is given, scan the device
* to build a memory based bad block table
*/
- if (!td)
- return nand_memory_bbt(mtd, bd);
+ if (!td) {
+ if ((res = nand_memory_bbt(mtd, bd))) {
+ printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ kfree(this->bbt);
+ this->bbt = NULL;
+ }
+ return res;
+ }
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
- buf = kmalloc (len, GFP_KERNEL);
+ buf = vmalloc(len);
if (!buf) {
- printk (KERN_ERR "nand_bbt: Out of memory\n");
- kfree (this->bbt);
+ printk(KERN_ERR "nand_bbt: Out of memory\n");
+ kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
/* Is the bbt at a given page ? */
if (td->options & NAND_BBT_ABSPAGE) {
- res = read_abs_bbts (mtd, buf, td, md);
+ res = read_abs_bbts(mtd, buf, td, md);
} else {
/* Search the bad block table using a pattern in oob */
- res = search_read_bbts (mtd, buf, td, md);
+ res = search_read_bbts(mtd, buf, td, md);
}
if (res)
- res = check_create (mtd, buf, bd);
+ res = check_create(mtd, buf, bd);
/* Prevent the bbt regions from erasing / writing */
- mark_bbt_region (mtd, td);
+ mark_bbt_region(mtd, td);
if (md)
- mark_bbt_region (mtd, md);
+ mark_bbt_region(mtd, md);
- kfree (buf);
+ vfree(buf);
return res;
}
-
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
* @mtd: MTD device structure
@@ -847,7 +1032,7 @@
*
* The function updates the bad block table(s)
*/
-int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
+int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
int len, res = 0, writeops = 0;
@@ -863,9 +1048,9 @@
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
- buf = kmalloc (len, GFP_KERNEL);
+ buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk (KERN_ERR "nand_update_bbt: Out of memory\n");
+ printk(KERN_ERR "nand_update_bbt: Out of memory\n");
return -ENOMEM;
}
@@ -873,7 +1058,7 @@
/* Do we have a bbt per chip ? */
if (td->options & NAND_BBT_PERCHIP) {
- chip = (int) (offs >> this->chip_shift);
+ chip = (int)(offs >> this->chip_shift);
chipsel = chip;
} else {
chip = 0;
@@ -886,29 +1071,26 @@
/* Write the bad block table to the device ? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, td, md, chipsel);
+ res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
/* Write the mirror bad block table to the device ? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, md, td, chipsel);
+ res = write_bbt(mtd, buf, md, td, chipsel);
}
-out:
- kfree (buf);
+ out:
+ kfree(buf);
return res;
}
/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks
- *
- * The memory based patterns just
- */
+ * while scanning a device for factory marked good / bad blocks. */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr smallpage_memorybased = {
- .options = 0,
+ .options = NAND_BBT_SCAN2NDPAGE,
.offs = 5,
.len = 1,
.pattern = scan_ff_pattern
@@ -922,14 +1104,14 @@
};
static struct nand_bbt_descr smallpage_flashbased = {
- .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .options = NAND_BBT_SCAN2NDPAGE,
.offs = 5,
.len = 1,
.pattern = scan_ff_pattern
};
static struct nand_bbt_descr largepage_flashbased = {
- .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .options = NAND_BBT_SCAN2NDPAGE,
.offs = 0,
.len = 2,
.pattern = scan_ff_pattern
@@ -977,7 +1159,7 @@
* support for the device and calls the nand_scan_bbt function
*
*/
-int nand_default_bbt (struct mtd_info *mtd)
+int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
@@ -987,7 +1169,7 @@
* of the good / bad information, so we _must_ store
* this information in a good / bad table during
* startup
- */
+ */
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
@@ -995,10 +1177,9 @@
this->bbt_md = &bbt_mirror_descr;
}
this->options |= NAND_USE_FLASH_BBT;
- return nand_scan_bbt (mtd, &agand_flashbased);
+ return nand_scan_bbt(mtd, &agand_flashbased);
}
-
/* Is a flash based bad block table requested ? */
if (this->options & NAND_USE_FLASH_BBT) {
/* Use the default pattern descriptors */
@@ -1007,18 +1188,17 @@
this->bbt_md = &bbt_mirror_descr;
}
if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->oobblock > 512) ?
- &largepage_flashbased : &smallpage_flashbased;
+ this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
}
} else {
this->bbt_td = NULL;
this->bbt_md = NULL;
if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->oobblock > 512) ?
- &largepage_memorybased : &smallpage_memorybased;
+ this->badblock_pattern = (mtd->writesize > 512) ?
+ &largepage_memorybased : &smallpage_memorybased;
}
}
- return nand_scan_bbt (mtd, this->badblock_pattern);
+ return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
@@ -1027,26 +1207,35 @@
* @offs: offset in the device
* @allowbbt: allow access to bad block table region
*
- */
-int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
+*/
+int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
int block;
- uint8_t res;
+ uint8_t res;
/* Get block number * 2 */
- block = (int) (offs >> (this->bbt_erase_shift - 1));
+ block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
MTDDEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: "
"(block %d) 0x%02x\n", (unsigned int)offs, res, block >> 1);
switch ((int)res) {
- case 0x00: return 0;
- case 0x01: return 1;
- case 0x02: return allowbbt ? 0 : 1;
+ case 0x00:
+ return 0;
+ case 0x01:
+ return 1;
+ case 0x02:
+ return allowbbt ? 0 : 1;
}
return 1;
}
+/* XXX U-BOOT XXX */
+#if 0
+EXPORT_SYMBOL(nand_scan_bbt);
+EXPORT_SYMBOL(nand_default_bbt);
+#endif
+
#endif
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 4c532b0..e1d5154 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -7,7 +7,9 @@
* Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
* Toshiba America Electronics Components, Inc.
*
- * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $
+ * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
*
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -39,6 +41,14 @@
#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/nand_ecc.h>
+#endif
+
#include<linux/mtd/mtd.h>
/*
@@ -128,6 +138,10 @@
return 0;
}
+/* XXX U-BOOT XXX */
+#if 0
+EXPORT_SYMBOL(nand_calculate_ecc);
+#endif
#endif /* CONFIG_NAND_SPL */
static inline int countbits(uint32_t byte)
@@ -197,4 +211,9 @@
return -1;
}
+/* XXX U-BOOT XXX */
+#if 0
+EXPORT_SYMBOL(nand_correct_data);
+#endif
+
#endif
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 7363490..f8b96cf 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -2,8 +2,8 @@
* drivers/mtd/nandids.c
*
* Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
- *
- * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $
+ *
+ * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,7 +16,6 @@
#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
#include <linux/mtd/nand.h>
-
/*
* Chip ID list
*
@@ -29,13 +28,15 @@
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+
+#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
{"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
{"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
{"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
{"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
{"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
{"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
{"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
{"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
{"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
@@ -44,6 +45,7 @@
{"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
{"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
{"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+#endif
{"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
{"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
@@ -61,52 +63,72 @@
{"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
{"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
{"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
{"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
{"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
{"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
- /* These are the new chips with large page size. The pagesize
- * and the erasesize is determined from the extended id bytes
- */
+ /*
+ * These are the new chips with large page size. The pagesize and the
+ * erasesize is determined from the extended id bytes
+ */
+#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
+
+ /*512 Megabit */
+ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
+
/* 1 Gigabit */
- {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
/* 2 Gigabit */
- {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16},
+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16},
/* 4 Gigabit */
- {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16},
+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16},
/* 8 Gigabit */
- {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16},
+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16},
/* 16 Gigabit */
- {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
- /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
- * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
- * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
- * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
- * There are more speed improvements for reads and writes possible, but not implemented now
+ /*
+ * Renesas AND 1 Gigabit. Those chips do not support extended id and
+ * have a strange page/block layout ! The chosen minimum erasesize is
+ * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page
+ * planes 1 block = 2 pages, but due to plane arrangement the blocks
+ * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would
+ * increase the eraseblock size so we chose a combined one which can be
+ * erased in one go There are more speed improvements for reads and
+ * writes possible, but not implemented now
*/
- {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
+ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000,
+ NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
+ BBT_AUTO_REFRESH
+ },
{NULL,}
};
@@ -121,6 +143,7 @@
{NAND_MFR_NATIONAL, "National"},
{NAND_MFR_RENESAS, "Renesas"},
{NAND_MFR_STMICRO, "ST Micro"},
+ {NAND_MFR_HYNIX, "Hynix"},
{NAND_MFR_MICRON, "Micron"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 828cc33..02fe914 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -39,6 +39,9 @@
#include <malloc.h>
#include <div64.h>
+
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
#include <nand.h>
#include <jffs2/jffs2.h>
@@ -69,71 +72,33 @@
int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
{
struct jffs2_unknown_node cleanmarker;
- int clmpos = 0;
- int clmlen = 8;
erase_info_t erase;
ulong erase_length;
- int isNAND;
int bbtest = 1;
int result;
int percent_complete = -1;
int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL;
const char *mtd_device = meminfo->name;
+ struct mtd_oob_ops oob_opts;
+ struct nand_chip *chip = meminfo->priv;
+ uint8_t buf[64];
+ memset(buf, 0, sizeof(buf));
memset(&erase, 0, sizeof(erase));
+ memset(&oob_opts, 0, sizeof(oob_opts));
erase.mtd = meminfo;
erase.len = meminfo->erasesize;
erase.addr = opts->offset;
erase_length = opts->length;
- isNAND = meminfo->type == MTD_NANDFLASH ? 1 : 0;
- if (opts->jffs2) {
- cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
- cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
- if (isNAND) {
- struct nand_oobinfo *oobinfo = &meminfo->oobinfo;
-
- /* check for autoplacement */
- if (oobinfo->useecc == MTD_NANDECC_AUTOPLACE) {
- /* get the position of the free bytes */
- if (!oobinfo->oobfree[0][1]) {
- printf(" Eeep. Autoplacement selected "
- "and no empty space in oob\n");
- return -1;
- }
- clmpos = oobinfo->oobfree[0][0];
- clmlen = oobinfo->oobfree[0][1];
- if (clmlen > 8)
- clmlen = 8;
- } else {
- /* legacy mode */
- switch (meminfo->oobsize) {
- case 8:
- clmpos = 6;
- clmlen = 2;
- break;
- case 16:
- clmpos = 8;
- clmlen = 8;
- break;
- case 64:
- clmpos = 16;
- clmlen = 8;
- break;
- }
- }
-
- cleanmarker.totlen = cpu_to_je32(8);
- } else {
- cleanmarker.totlen =
- cpu_to_je32(sizeof(struct jffs2_unknown_node));
- }
- cleanmarker.hdr_crc = cpu_to_je32(
- crc32_no_comp(0, (unsigned char *) &cleanmarker,
- sizeof(struct jffs2_unknown_node) - 4));
- }
+ cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
+ cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+ cleanmarker.totlen = cpu_to_je32(8);
+ cleanmarker.hdr_crc = cpu_to_je32(
+ crc32_no_comp(0, (unsigned char *) &cleanmarker,
+ sizeof(struct jffs2_unknown_node) - 4));
/* scrub option allows to erase badblock. To prevent internal
* check from erase() method, set block check method to dummy
@@ -194,25 +159,21 @@
/* format for JFFS2 ? */
if (opts->jffs2) {
- /* write cleanmarker */
- if (isNAND) {
- size_t written;
- result = meminfo->write_oob(meminfo,
- erase.addr + clmpos,
- clmlen,
- &written,
- (unsigned char *)
- &cleanmarker);
- if (result != 0) {
- printf("\n%s: MTD writeoob failure: %d\n",
- mtd_device, result);
- continue;
- }
- } else {
- printf("\n%s: this erase routine only supports"
- " NAND devices!\n",
- mtd_device);
+ chip->ops.len = chip->ops.ooblen = 64;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
+
+ result = meminfo->write_oob(meminfo,
+ erase.addr + meminfo->oobsize,
+ &chip->ops);
+ if (result != 0) {
+ printf("\n%s: MTD writeoob failure: %d\n",
+ mtd_device, result);
+ continue;
}
+ else
+ printf("%s: MTD writeoob at 0x%08x\n",mtd_device, erase.addr + meminfo->oobsize );
}
if (!opts->quiet) {
@@ -232,11 +193,11 @@
percent_complete = percent;
printf("\rErasing at 0x%x -- %3d%% complete.",
- erase.addr, percent);
+ erase.addr, percent);
if (opts->jffs2 && result == 0)
- printf(" Cleanmarker written at 0x%x.",
- erase.addr);
+ printf(" Cleanmarker written at 0x%x.",
+ erase.addr);
}
}
}
@@ -253,6 +214,9 @@
return 0;
}
+/* XXX U-BOOT XXX */
+#if 0
+
#define MAX_PAGE_SIZE 2048
#define MAX_OOB_SIZE 64
@@ -263,443 +227,29 @@
static unsigned char oob_buf[MAX_OOB_SIZE];
/* OOB layouts to pass into the kernel as default */
-static struct nand_oobinfo none_oobinfo = {
+static struct nand_ecclayout none_ecclayout = {
.useecc = MTD_NANDECC_OFF,
};
-static struct nand_oobinfo jffs2_oobinfo = {
+static struct nand_ecclayout jffs2_ecclayout = {
.useecc = MTD_NANDECC_PLACE,
.eccbytes = 6,
.eccpos = { 0, 1, 2, 3, 6, 7 }
};
-static struct nand_oobinfo yaffs_oobinfo = {
+static struct nand_ecclayout yaffs_ecclayout = {
.useecc = MTD_NANDECC_PLACE,
.eccbytes = 6,
.eccpos = { 8, 9, 10, 13, 14, 15}
};
-static struct nand_oobinfo autoplace_oobinfo = {
+static struct nand_ecclayout autoplace_ecclayout = {
.useecc = MTD_NANDECC_AUTOPLACE
};
+#endif
-/**
- * nand_write_opts: - write image to NAND flash with support for various options
- *
- * @param meminfo NAND device to erase
- * @param opts write options (@see nand_write_options)
- * @return 0 in case of success
- *
- * This code is ported from nandwrite.c from Linux mtd utils by
- * Steven J. Hill and Thomas Gleixner.
- */
-int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
-{
- int imglen = 0;
- int pagelen;
- int baderaseblock;
- int blockstart = -1;
- loff_t offs;
- int readlen;
- int oobinfochanged = 0;
- int percent_complete = -1;
- struct nand_oobinfo old_oobinfo;
- ulong mtdoffset = opts->offset;
- ulong erasesize_blockalign;
- u_char *buffer = opts->buffer;
- size_t written;
- int result;
-
- if (opts->pad && opts->writeoob) {
- printf("Can't pad when oob data is present.\n");
- return -1;
- }
-
- /* set erasesize to specified number of blocks - to match
- * jffs2 (virtual) block size */
- if (opts->blockalign == 0) {
- erasesize_blockalign = meminfo->erasesize;
- } else {
- erasesize_blockalign = meminfo->erasesize * opts->blockalign;
- }
-
- /* make sure device page sizes are valid */
- if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512)
- && !(meminfo->oobsize == 8 && meminfo->oobblock == 256)
- && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) {
- printf("Unknown flash (not normal NAND)\n");
- return -1;
- }
-
- /* read the current oob info */
- memcpy(&old_oobinfo, &meminfo->oobinfo, sizeof(old_oobinfo));
-
- /* write without ecc? */
- if (opts->noecc) {
- memcpy(&meminfo->oobinfo, &none_oobinfo,
- sizeof(meminfo->oobinfo));
- oobinfochanged = 1;
- }
-
- /* autoplace ECC? */
- if (opts->autoplace && (old_oobinfo.useecc != MTD_NANDECC_AUTOPLACE)) {
-
- memcpy(&meminfo->oobinfo, &autoplace_oobinfo,
- sizeof(meminfo->oobinfo));
- oobinfochanged = 1;
- }
-
- /* force OOB layout for jffs2 or yaffs? */
- if (opts->forcejffs2 || opts->forceyaffs) {
- struct nand_oobinfo *oobsel =
- opts->forcejffs2 ? &jffs2_oobinfo : &yaffs_oobinfo;
-
- if (meminfo->oobsize == 8) {
- if (opts->forceyaffs) {
- printf("YAFSS cannot operate on "
- "256 Byte page size\n");
- goto restoreoob;
- }
- /* Adjust number of ecc bytes */
- jffs2_oobinfo.eccbytes = 3;
- }
-
- memcpy(&meminfo->oobinfo, oobsel, sizeof(meminfo->oobinfo));
- }
-
- /* get image length */
- imglen = opts->length;
- pagelen = meminfo->oobblock
- + ((opts->writeoob != 0) ? meminfo->oobsize : 0);
-
- /* check, if file is pagealigned */
- if ((!opts->pad) && ((imglen % pagelen) != 0)) {
- printf("Input block length is not page aligned\n");
- goto restoreoob;
- }
-
- /* check, if length fits into device */
- if (((imglen / pagelen) * meminfo->oobblock)
- > (meminfo->size - opts->offset)) {
- printf("Image %d bytes, NAND page %d bytes, "
- "OOB area %u bytes, device size %u bytes\n",
- imglen, pagelen, meminfo->oobblock, meminfo->size);
- printf("Input block does not fit into device\n");
- goto restoreoob;
- }
-
- if (!opts->quiet)
- printf("\n");
-
- /* get data from input and write to the device */
- while (imglen && (mtdoffset < meminfo->size)) {
-
- WATCHDOG_RESET ();
-
- /*
- * new eraseblock, check for bad block(s). Stay in the
- * loop to be sure if the offset changes because of
- * a bad block, that the next block that will be
- * written to is also checked. Thus avoiding errors if
- * the block(s) after the skipped block(s) is also bad
- * (number of blocks depending on the blockalign
- */
- while (blockstart != (mtdoffset & (~erasesize_blockalign+1))) {
- blockstart = mtdoffset & (~erasesize_blockalign+1);
- offs = blockstart;
- baderaseblock = 0;
-
- /* check all the blocks in an erase block for
- * bad blocks */
- do {
- int ret = meminfo->block_isbad(meminfo, offs);
-
- if (ret < 0) {
- printf("Bad block check failed\n");
- goto restoreoob;
- }
- if (ret == 1) {
- baderaseblock = 1;
- if (!opts->quiet)
- printf("\rBad block at 0x%lx "
- "in erase block from "
- "0x%x will be skipped\n",
- (long) offs,
- blockstart);
- }
-
- if (baderaseblock) {
- mtdoffset = blockstart
- + erasesize_blockalign;
- }
- offs += erasesize_blockalign
- / opts->blockalign;
- } while (offs < blockstart + erasesize_blockalign);
- }
-
- readlen = meminfo->oobblock;
- if (opts->pad && (imglen < readlen)) {
- readlen = imglen;
- memset(data_buf + readlen, 0xff,
- meminfo->oobblock - readlen);
- }
-
- /* read page data from input memory buffer */
- memcpy(data_buf, buffer, readlen);
- buffer += readlen;
-
- if (opts->writeoob) {
- /* read OOB data from input memory block, exit
- * on failure */
- memcpy(oob_buf, buffer, meminfo->oobsize);
- buffer += meminfo->oobsize;
-
- /* write OOB data first, as ecc will be placed
- * in there*/
- result = meminfo->write_oob(meminfo,
- mtdoffset,
- meminfo->oobsize,
- &written,
- (unsigned char *)
- &oob_buf);
-
- if (result != 0) {
- printf("\nMTD writeoob failure: %d\n",
- result);
- goto restoreoob;
- }
- imglen -= meminfo->oobsize;
- }
-
- /* write out the page data */
- result = meminfo->write(meminfo,
- mtdoffset,
- meminfo->oobblock,
- &written,
- (unsigned char *) &data_buf);
-
- if (result != 0) {
- printf("writing NAND page at offset 0x%lx failed\n",
- mtdoffset);
- goto restoreoob;
- }
- imglen -= readlen;
-
- if (!opts->quiet) {
- unsigned long long n = (unsigned long long)
- (opts->length-imglen) * 100;
- int percent;
-
- do_div(n, opts->length);
- percent = (int)n;
-
- /* output progress message only at whole percent
- * steps to reduce the number of messages printed
- * on (slow) serial consoles
- */
- if (percent != percent_complete) {
- printf("\rWriting data at 0x%lx "
- "-- %3d%% complete.",
- mtdoffset, percent);
- percent_complete = percent;
- }
- }
-
- mtdoffset += meminfo->oobblock;
- }
-
- if (!opts->quiet)
- printf("\n");
-
-restoreoob:
- if (oobinfochanged) {
- memcpy(&meminfo->oobinfo, &old_oobinfo,
- sizeof(meminfo->oobinfo));
- }
-
- if (imglen > 0) {
- printf("Data did not fit into device, due to bad blocks\n");
- return -1;
- }
-
- /* return happy */
- return 0;
-}
-
-/**
- * nand_read_opts: - read image from NAND flash with support for various options
- *
- * @param meminfo NAND device to erase
- * @param opts read options (@see struct nand_read_options)
- * @return 0 in case of success
- *
- */
-int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
-{
- int imglen = opts->length;
- int pagelen;
- int baderaseblock;
- int blockstart = -1;
- int percent_complete = -1;
- loff_t offs;
- size_t readlen;
- ulong mtdoffset = opts->offset;
- u_char *buffer = opts->buffer;
- int result;
-
- /* make sure device page sizes are valid */
- if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512)
- && !(meminfo->oobsize == 8 && meminfo->oobblock == 256)
- && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) {
- printf("Unknown flash (not normal NAND)\n");
- return -1;
- }
-
- pagelen = meminfo->oobblock
- + ((opts->readoob != 0) ? meminfo->oobsize : 0);
-
- /* check, if length is not larger than device */
- if (((imglen / pagelen) * meminfo->oobblock)
- > (meminfo->size - opts->offset)) {
- printf("Image %d bytes, NAND page %d bytes, "
- "OOB area %u bytes, device size %u bytes\n",
- imglen, pagelen, meminfo->oobblock, meminfo->size);
- printf("Input block is larger than device\n");
- return -1;
- }
-
- if (!opts->quiet)
- printf("\n");
-
- /* get data from input and write to the device */
- while (imglen && (mtdoffset < meminfo->size)) {
-
- WATCHDOG_RESET ();
-
- /*
- * new eraseblock, check for bad block(s). Stay in the
- * loop to be sure if the offset changes because of
- * a bad block, that the next block that will be
- * written to is also checked. Thus avoiding errors if
- * the block(s) after the skipped block(s) is also bad
- * (number of blocks depending on the blockalign
- */
- while (blockstart != (mtdoffset & (~meminfo->erasesize+1))) {
- blockstart = mtdoffset & (~meminfo->erasesize+1);
- offs = blockstart;
- baderaseblock = 0;
-
- /* check all the blocks in an erase block for
- * bad blocks */
- do {
- int ret = meminfo->block_isbad(meminfo, offs);
-
- if (ret < 0) {
- printf("Bad block check failed\n");
- return -1;
- }
- if (ret == 1) {
- baderaseblock = 1;
- if (!opts->quiet)
- printf("\rBad block at 0x%lx "
- "in erase block from "
- "0x%x will be skipped\n",
- (long) offs,
- blockstart);
- }
-
- if (baderaseblock) {
- mtdoffset = blockstart
- + meminfo->erasesize;
- }
- offs += meminfo->erasesize;
-
- } while (offs < blockstart + meminfo->erasesize);
- }
-
-
- /* read page data to memory buffer */
- result = meminfo->read(meminfo,
- mtdoffset,
- meminfo->oobblock,
- &readlen,
- (unsigned char *) &data_buf);
-
- if (result != 0) {
- printf("reading NAND page at offset 0x%lx failed\n",
- mtdoffset);
- return -1;
- }
-
- if (imglen < readlen) {
- readlen = imglen;
- }
-
- memcpy(buffer, data_buf, readlen);
- buffer += readlen;
- imglen -= readlen;
-
- if (opts->readoob) {
- result = meminfo->read_oob(meminfo,
- mtdoffset,
- meminfo->oobsize,
- &readlen,
- (unsigned char *)
- &oob_buf);
-
- if (result != 0) {
- printf("\nMTD readoob failure: %d\n",
- result);
- return -1;
- }
-
-
- if (imglen < readlen) {
- readlen = imglen;
- }
-
- memcpy(buffer, oob_buf, readlen);
-
- buffer += readlen;
- imglen -= readlen;
- }
-
- if (!opts->quiet) {
- unsigned long long n = (unsigned long long)
- (opts->length-imglen) * 100;
- int percent;
-
- do_div(n, opts->length);
- percent = (int)n;
-
- /* output progress message only at whole percent
- * steps to reduce the number of messages printed
- * on (slow) serial consoles
- */
- if (percent != percent_complete) {
- if (!opts->quiet)
- printf("\rReading data from 0x%lx "
- "-- %3d%% complete.",
- mtdoffset, percent);
- percent_complete = percent;
- }
- }
-
- mtdoffset += meminfo->oobblock;
- }
-
- if (!opts->quiet)
- printf("\n");
-
- if (imglen > 0) {
- printf("Could not read entire image due to bad blocks\n");
- return -1;
- }
-
- /* return happy */
- return 0;
-}
-
+/* XXX U-BOOT XXX */
+#if 0
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
@@ -784,7 +334,7 @@
this->select_chip(meminfo, chipnr);
- if ((offset & (meminfo->oobblock - 1)) != 0) {
+ if ((offset & (meminfo->writesize - 1)) != 0) {
printf ("nand_get_lock_status: "
"Start address must be beginning of "
"nand page!\n");
@@ -813,7 +363,7 @@
* @param meminfo nand mtd instance
* @param start start byte address
* @param length number of bytes to unlock (must be a multiple of
- * page size nand->oobblock)
+ * page size nand->writesize)
*
* @return 0 on success, -1 in case of error
*/
@@ -839,14 +389,14 @@
goto out;
}
- if ((start & (meminfo->oobblock - 1)) != 0) {
+ if ((start & (meminfo->writesize - 1)) != 0) {
printf ("nand_unlock: Start address must be beginning of "
"nand page!\n");
ret = -1;
goto out;
}
- if (length == 0 || (length & (meminfo->oobblock - 1)) != 0) {
+ if (length == 0 || (length & (meminfo->writesize - 1)) != 0) {
printf ("nand_unlock: Length must be a multiple of nand page "
"size!\n");
ret = -1;
@@ -875,5 +425,186 @@
this->select_chip(meminfo, -1);
return ret;
}
-
#endif
+
+/**
+ * get_len_incl_bad
+ *
+ * Check if length including bad blocks fits into device.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @param length image length
+ * @return image length including bad blocks
+ */
+static size_t get_len_incl_bad (nand_info_t *nand, size_t offset,
+ const size_t length)
+{
+ size_t len_incl_bad = 0;
+ size_t len_excl_bad = 0;
+ size_t block_len;
+
+ while (len_excl_bad < length) {
+ block_len = nand->erasesize - (offset & (nand->erasesize - 1));
+
+ if (!nand_block_isbad (nand, offset & ~(nand->erasesize - 1)))
+ len_excl_bad += block_len;
+
+ len_incl_bad += block_len;
+ offset += block_len;
+
+ if ((offset + len_incl_bad) >= nand->size)
+ break;
+ }
+
+ return len_incl_bad;
+}
+
+/**
+ * nand_write_skip_bad:
+ *
+ * Write image to NAND flash.
+ * Blocks that are marked bad are skipped and the is written to the next
+ * block instead as long as the image is short enough to fit even after
+ * skipping the bad blocks.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @param length buffer length
+ * @param buf buffer to read from
+ * @return 0 in case of success
+ */
+int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+ u_char *buffer)
+{
+ int rval;
+ size_t left_to_write = *length;
+ size_t len_incl_bad;
+ u_char *p_buffer = buffer;
+
+ /* Reject writes, which are not page aligned */
+ if ((offset & (nand->writesize - 1)) != 0 ||
+ (*length & (nand->writesize - 1)) != 0) {
+ printf ("Attempt to write non page aligned data\n");
+ return -EINVAL;
+ }
+
+ len_incl_bad = get_len_incl_bad (nand, offset, *length);
+
+ if ((offset + len_incl_bad) >= nand->size) {
+ printf ("Attempt to write outside the flash area\n");
+ return -EINVAL;
+ }
+
+ if (len_incl_bad == *length) {
+ rval = nand_write (nand, offset, length, buffer);
+ if (rval != 0) {
+ printf ("NAND write to offset %x failed %d\n",
+ offset, rval);
+ return rval;
+ }
+ }
+
+ while (left_to_write > 0) {
+ size_t block_offset = offset & (nand->erasesize - 1);
+ size_t write_size;
+
+ if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
+ printf ("Skip bad block 0x%08x\n",
+ offset & ~(nand->erasesize - 1));
+ offset += nand->erasesize - block_offset;
+ continue;
+ }
+
+ if (left_to_write < (nand->erasesize - block_offset))
+ write_size = left_to_write;
+ else
+ write_size = nand->erasesize - block_offset;
+
+ rval = nand_write (nand, offset, &write_size, p_buffer);
+ if (rval != 0) {
+ printf ("NAND write to offset %x failed %d\n",
+ offset, rval);
+ *length -= left_to_write;
+ return rval;
+ }
+
+ left_to_write -= write_size;
+ offset += write_size;
+ p_buffer += write_size;
+ }
+
+ return 0;
+}
+
+/**
+ * nand_read_skip_bad:
+ *
+ * Read image from NAND flash.
+ * Blocks that are marked bad are skipped and the next block is readen
+ * instead as long as the image is short enough to fit even after skipping the
+ * bad blocks.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @param length buffer length, on return holds remaining bytes to read
+ * @param buffer buffer to write to
+ * @return 0 in case of success
+ */
+int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+ u_char *buffer)
+{
+ int rval;
+ size_t left_to_read = *length;
+ size_t len_incl_bad;
+ u_char *p_buffer = buffer;
+
+ len_incl_bad = get_len_incl_bad (nand, offset, *length);
+
+ if ((offset + len_incl_bad) >= nand->size) {
+ printf ("Attempt to read outside the flash area\n");
+ return -EINVAL;
+ }
+
+ if (len_incl_bad == *length) {
+ rval = nand_read (nand, offset, length, buffer);
+ if (rval != 0) {
+ printf ("NAND read from offset %x failed %d\n",
+ offset, rval);
+ return rval;
+ }
+ }
+
+ while (left_to_read > 0) {
+ size_t block_offset = offset & (nand->erasesize - 1);
+ size_t read_length;
+
+ if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
+ printf ("Skipping bad block 0x%08x\n",
+ offset & ~(nand->erasesize - 1));
+ offset += nand->erasesize - block_offset;
+ continue;
+ }
+
+ if (left_to_read < (nand->erasesize - block_offset))
+ read_length = left_to_read;
+ else
+ read_length = nand->erasesize - block_offset;
+
+ rval = nand_read (nand, offset, &read_length, p_buffer);
+ if (rval != 0) {
+ printf ("NAND read from offset %x failed %d\n",
+ offset, rval);
+ *length -= left_to_read;
+ return rval;
+ }
+
+ left_to_read -= read_length;
+ offset += read_length;
+ p_buffer += read_length;
+ }
+
+ return 0;
+}
+
+#endif /* defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) */
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index a7054ae..ded1706 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -19,6 +19,7 @@
#include <asm/io.h>
#include <asm/errno.h>
+#include <malloc.h>
/* It should access 16-bit instead of 8-bit */
static inline void *memcpy_16(void *dst, const void *src, unsigned int len)
@@ -1110,21 +1111,21 @@
*
* Print device ID
*/
-void onenand_print_device_info(int device, int verbose)
+char * onenand_print_device_info(int device)
{
int vcc, demuxed, ddp, density;
-
- if (!verbose)
- return;
+ char *dev_info = malloc(80);
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
+ sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
demuxed ? "" : "Muxed ",
ddp ? "(DDP)" : "",
(16 << density), vcc ? "2.65/3.3" : "1.8", device);
+
+ return dev_info;
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
@@ -1203,7 +1204,7 @@
}
/* Flash device information */
- onenand_print_device_info(dev_id, 0);
+ mtd->name = onenand_print_device_info(dev_id);
this->device_id = dev_id;
density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
@@ -1239,6 +1240,17 @@
this->options |= ONENAND_CONT_LOCK;
}
+ mtd->erase = onenand_erase;
+ mtd->read = onenand_read;
+ mtd->write = onenand_write;
+ mtd->read_ecc = onenand_read_ecc;
+ mtd->write_ecc = onenand_write_ecc;
+ mtd->read_oob = onenand_read_oob;
+ mtd->write_oob = onenand_write_oob;
+ mtd->sync = onenand_sync;
+ mtd->block_isbad = onenand_block_isbad;
+ mtd->block_markbad = onenand_block_markbad;
+
return 0;
}
diff --git a/fs/Makefile b/fs/Makefile
index 273d90e..95ac0e9 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -22,7 +22,7 @@
#
#
-SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
+SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2 yaffs2
$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
diff --git a/fs/yaffs2/Makefile b/fs/yaffs2/Makefile
new file mode 100644
index 0000000..ab8b27f
--- /dev/null
+++ b/fs/yaffs2/Makefile
@@ -0,0 +1,56 @@
+# Makefile for YAFFS direct test
+#
+#
+# YAFFS: Yet another Flash File System. A NAND-flash specific file system.
+#
+# Copyright (C) 2003 Aleph One Ltd.
+#
+#
+# Created by Charles Manning <charles@aleph1.co.uk>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# NB Warning this Makefile does not include header dependencies.
+#
+# $Id: Makefile,v 1.15 2007/07/18 19:40:38 charles Exp $
+
+#EXTRA_COMPILE_FLAGS = -DYAFFS_IGNORE_TAGS_ECC
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libyaffs2.a
+
+COBJS-$(CONFIG_YAFFS2) := \
+ yaffscfg.o yaffs_ecc.o yaffsfs.o yaffs_guts.o yaffs_packedtags1.o \
+ yaffs_tagscompat.o yaffs_packedtags2.o yaffs_tagsvalidity.o \
+ yaffs_nand.o yaffs_checkptrw.o yaffs_qsort.o yaffs_mtdif.o \
+ yaffs_mtdif2.o
+
+SRCS := $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+
+# -DCONFIG_YAFFS_NO_YAFFS1
+CFLAGS += -DCONFIG_YAFFS_DIRECT -DCONFIG_YAFFS_SHORT_NAMES_IN_RAM -DCONFIG_YAFFS_YAFFS2 -DNO_Y_INLINE -DLINUX_VERSION_CODE=0x20622
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+.PHONY: clean distclean
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
diff --git a/fs/yaffs2/README-linux b/fs/yaffs2/README-linux
new file mode 100644
index 0000000..589ae8d
--- /dev/null
+++ b/fs/yaffs2/README-linux
@@ -0,0 +1,201 @@
+Welcome to YAFFS, the first file system developed specifically for NAND flash.
+
+It is now YAFFS2 - original YAFFS (AYFFS1) only supports 512-byte page
+NAND and is now deprectated. YAFFS2 supports 512b page in 'YAFFS1
+compatibility' mode (CONFIG_YAFFS_YAFFS1) and 2K or larger page NAND
+in YAFFS2 mode (CONFIG_YAFFS_YAFFS2).
+
+
+A note on licencing
+-------------------
+YAFFS is available under the GPL and via alternative licensing
+arrangements with Aleph One. If you're using YAFFS as a Linux kernel
+file system then it will be under the GPL. For use in other situations
+you should discuss licensing issues with Aleph One.
+
+
+Terminology
+-----------
+Page - NAND addressable unit (normally 512b or 2Kbyte size) - can
+ be read, written, marked bad. Has associated OOB.
+Block - Eraseable unit. 64 Pages. (128K on 2K NAND, 32K on 512b NAND)
+OOB - 'spare area' of each page for ECC, bad block marked and YAFFS
+ tags. 16 bytes per 512b - 64 bytes for 2K page size.
+Chunk - Basic YAFFS addressable unit. Same size as Page.
+Object - YAFFS Object: File, Directory, Link, Device etc.
+
+YAFFS design
+------------
+
+YAFFS is a log-structured filesystem. It is designed particularly for
+NAND (as opposed to NOR) flash, to be flash-friendly, robust due to
+journalling, and to have low RAM and boot time overheads. File data is
+stored in 'chunks'. Chunks are the same size as NAND pages. Each page
+is marked with file id and chunk number. These marking 'tags' are
+stored in the OOB (or 'spare') region of the flash. The chunk number
+is determined by dividing the file position by the chunk size. Each
+chunk has a number of valid bytes, which equals the page size for all
+except the last chunk in a file.
+
+File 'headers' are stored as the first page in a file, marked as a
+different type to data pages. The same mechanism is used to store
+directories, device files, links etc. The first page describes which
+type of object it is.
+
+YAFFS2 never re-writes a page, because the spec of NAND chips does not
+allow it. (YAFFS1 used to mark a block 'deleted' in the OOB). Deletion
+is managed by moving deleted objects to the special, hidden 'unlinked'
+directory. These records are preserved until all the pages containing
+the object have been erased (We know when this happen by keeping a
+count of chunks remaining on the system for each object - when it
+reaches zero the object really is gone).
+
+When data in a file is overwritten, the relevant chunks are replaced
+by writing new pages to flash containing the new data but the same
+tags.
+
+Pages are also marked with a short (2 bit) serial number that
+increments each time the page at this position is incremented. The
+reason for this is that if power loss/crash/other act of demonic
+forces happens before the replaced page is marked as discarded, it is
+possible to have two pages with the same tags. The serial number is
+used to arbitrate.
+
+A block containing only discarded pages (termed a dirty block) is an
+obvious candidate for garbage collection. Otherwise valid pages can be
+copied off a block thus rendering the whole block discarded and ready
+for garbage collection.
+
+In theory you don't need to hold the file structure in RAM... you
+could just scan the whole flash looking for pages when you need them.
+In practice though you'd want better file access times than that! The
+mechanism proposed here is to have a list of __u16 page addresses
+associated with each file. Since there are 2^18 pages in a 128MB NAND,
+a __u16 is insufficient to uniquely identify a page but is does
+identify a group of 4 pages - a small enough region to search
+exhaustively. This mechanism is clearly expandable to larger NAND
+devices - within reason. The RAM overhead with this approach is approx
+2 bytes per page - 512kB of RAM for a whole 128MB NAND.
+
+Boot-time scanning to build the file structure lists only requires
+one pass reading NAND. If proper shutdowns happen the current RAM
+summary of the filesystem status is saved to flash, called
+'checkpointing'. This saves re-scanning the flash on startup, and gives
+huge boot/mount time savings.
+
+YAFFS regenerates its state by 'replaying the tape' - i.e. by
+scanning the chunks in their allocation order (i.e. block sequence ID
+order), which is usually different form the media block order. Each
+block is still only read once - starting from the end of the media and
+working back.
+
+YAFFS tags in YAFFS1 mode:
+
+18-bit Object ID (2^18 files, i.e. > 260,000 files). File id 0- is not
+ valid and indicates a deleted page. File od 0x3ffff is also not valid.
+ Synonymous with inode.
+2-bit serial number
+20-bit Chunk ID within file. Limit of 2^20 chunks/pages per file (i.e.
+ > 500MB max file size). Chunk ID 0 is the file header for the file.
+10-bit counter of the number of bytes used in the page.
+12 bit ECC on tags
+
+YAFFS tags in YAFFS2 mode:
+ 4 bytes 32-bit chunk ID
+ 4 bytes 32-bit object ID
+ 2 bytes Number of data bytes in this chunk
+ 4 bytes Sequence number for this block
+ 3 bytes ECC on tags
+ 12 bytes ECC on data (3 bytes per 256 bytes of data)
+
+
+Page allocation and garbage collection
+
+Pages are allocated sequentially from the currently selected block.
+When all the pages in the block are filled, another clean block is
+selected for allocation. At least two or three clean blocks are
+reserved for garbage collection purposes. If there are insufficient
+clean blocks available, then a dirty block ( ie one containing only
+discarded pages) is erased to free it up as a clean block. If no dirty
+blocks are available, then the dirtiest block is selected for garbage
+collection.
+
+Garbage collection is performed by copying the valid data pages into
+new data pages thus rendering all the pages in this block dirty and
+freeing it up for erasure. I also like the idea of selecting a block
+at random some small percentage of the time - thus reducing the chance
+of wear differences.
+
+YAFFS is single-threaded. Garbage-collection is done as a parasitic
+task of writing data. So each time some data is written, a bit of
+pending garbage collection is done. More pages are garbage-collected
+when free space is tight.
+
+
+Flash writing
+
+YAFFS only ever writes each page once, complying with the requirements
+of the most restricitve NAND devices.
+
+Wear levelling
+
+This comes as a side-effect of the block-allocation strategy. Data is
+always written on the next free block, so they are all used equally.
+Blocks containing data that is written but never erased will not get
+back into the free list, so wear is levelled over only blocks which
+are free or become free, not blocks which never change.
+
+
+
+Some helpful info
+-----------------
+
+Formatting a YAFFS device is simply done by erasing it.
+
+Making an initial filesystem can be tricky because YAFFS uses the OOB
+and thus the bytes that get written depend on the YAFFS data (tags),
+and the ECC bytes and bad block markers which are dictated by the
+hardware and/or the MTD subsystem. The data layout also depends on the
+device page size (512b or 2K). Because YAFFS is only responsible for
+some of the OOB data, generating a filesystem offline requires
+detailed knowledge of what the other parts (MTD and NAND
+driver/hardware) are going to do.
+
+To make a YAFFS filesystem you have 3 options:
+
+1) Boot the system with an empty NAND device mounted as YAFFS and copy
+ stuff on.
+
+2) Make a filesystem image offline, then boot the system and use
+ MTDutils to write an image to flash.
+
+3) Make a filesystem image offline and use some tool like a bootloader to
+ write it to flash.
+
+Option 1 avoids a lot of issues because all the parts
+(YAFFS/MTD/hardware) all take care of their own bits and (if you have
+put things together properly) it will 'just work'. YAFFS just needs to
+know how many bytes of the OOB it can use. However sometimes it is not
+practical.
+
+Option 2 lets MTD/hardware take care of the ECC so the filesystem
+image just had to know which bytes to use for YAFFS Tags.
+
+Option 3 is hardest as the image creator needs to know exactly what
+ECC bytes, endianness and algorithm to use as well as which bytes are
+available to YAFFS.
+
+mkyaffs2image creates an image suitable for option 3 for the
+particular case of yaffs2 on 2K page NAND with default MTD layout.
+
+mkyaffsimage creates an equivalent image for 512b page NAND (i.e.
+yaffs1 format).
+
+Bootloaders
+-----------
+
+A bootloader using YAFFS needs to know how MTD is laying out the OOB
+so that it can skip bad blocks.
+
+YAFFS Tracing
+-------------
diff --git a/fs/yaffs2/devextras.h b/fs/yaffs2/devextras.h
new file mode 100644
index 0000000..9acda79
--- /dev/null
+++ b/fs/yaffs2/devextras.h
@@ -0,0 +1,275 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * This file is just holds extra declarations used during development.
+ * Most of these are from kernel includes placed here so we can use them in
+ * applications.
+ *
+ */
+
+#ifndef __EXTRAS_H__
+#define __EXTRAS_H__
+
+#if defined WIN32
+#define __inline__ __inline
+#define new newHack
+#endif
+
+/* XXX U-BOOT XXX */
+#if 1 /* !(defined __KERNEL__) || (defined WIN32) */
+
+/* User space defines */
+
+/* XXX U-BOOT XXX */
+#if 0
+typedef unsigned char __u8;
+typedef unsigned short __u16;
+typedef unsigned __u32;
+#endif
+
+#include <asm/types.h>
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+#define prefetch(x) 1
+
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+ struct list_head name = LIST_HEAD_INIT(name)
+
+#define INIT_LIST_HEAD(ptr) do { \
+ (ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_add(struct list_head *new,
+ struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = new;
+ new->next = next;
+ new->prev = prev;
+ prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static __inline__ void list_add(struct list_head *new, struct list_head *head)
+{
+ __list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static __inline__ void list_add_tail(struct list_head *new,
+ struct list_head *head)
+{
+ __list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_del(struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = prev;
+ prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static __inline__ void list_del(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static __inline__ void list_del_init(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static __inline__ int list_empty(struct list_head *head)
+{
+ return head->next == head;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static __inline__ void list_splice(struct list_head *list,
+ struct list_head *head)
+{
+ struct list_head *first = list->next;
+
+ if (first != list) {
+ struct list_head *last = list->prev;
+ struct list_head *at = head->next;
+
+ first->prev = head;
+ head->next = first;
+
+ last->next = at;
+ at->prev = last;
+ }
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+ ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+
+/**
+ * list_for_each - iterate over a list
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ */
+#define list_for_each(pos, head) \
+ for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+ pos = pos->next, prefetch(pos->next))
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal
+ * of list entry
+ * @pos: the &struct list_head to use as a loop counter.
+ * @n: another &struct list_head to use as temporary storage
+ * @head: the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+ for (pos = (head)->next, n = pos->next; pos != (head); \
+ pos = n, n = pos->next)
+
+/*
+ * File types
+ */
+#define DT_UNKNOWN 0
+#define DT_FIFO 1
+#define DT_CHR 2
+#define DT_DIR 4
+#define DT_BLK 6
+#define DT_REG 8
+#define DT_LNK 10
+#define DT_SOCK 12
+#define DT_WHT 14
+
+#ifndef WIN32
+/* XXX U-BOOT XXX */
+#if 0
+#include <sys/stat.h>
+#else
+#include "common.h"
+#endif
+#endif
+
+/*
+ * Attribute flags. These should be or-ed together to figure out what
+ * has been changed!
+ */
+#define ATTR_MODE 1
+#define ATTR_UID 2
+#define ATTR_GID 4
+#define ATTR_SIZE 8
+#define ATTR_ATIME 16
+#define ATTR_MTIME 32
+#define ATTR_CTIME 64
+#define ATTR_ATIME_SET 128
+#define ATTR_MTIME_SET 256
+#define ATTR_FORCE 512 /* Not a change, but a change it */
+#define ATTR_ATTR_FLAG 1024
+
+struct iattr {
+ unsigned int ia_valid;
+ unsigned ia_mode;
+ unsigned ia_uid;
+ unsigned ia_gid;
+ unsigned ia_size;
+ unsigned ia_atime;
+ unsigned ia_mtime;
+ unsigned ia_ctime;
+ unsigned int ia_attr_flags;
+};
+
+#define KERN_DEBUG
+
+#else
+
+#ifndef WIN32
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/stat.h>
+#endif
+
+#endif
+
+#if defined WIN32
+#undef new
+#endif
+
+#endif
diff --git a/fs/yaffs2/yaffs_checkptrw.c b/fs/yaffs2/yaffs_checkptrw.c
new file mode 100644
index 0000000..f97ba4b
--- /dev/null
+++ b/fs/yaffs2/yaffs_checkptrw.c
@@ -0,0 +1,405 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+#include <malloc.h>
+
+const char *yaffs_checkptrw_c_version =
+ "$Id: yaffs_checkptrw.c,v 1.14 2007/05/15 20:07:40 charles Exp $";
+
+
+#include "yaffs_checkptrw.h"
+
+
+static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+{
+
+ int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+
+ T(YAFFS_TRACE_CHECKPOINT,
+ (TSTR("checkpt blocks available = %d" TENDSTR),
+ blocksAvailable));
+
+
+ return (blocksAvailable <= 0) ? 0 : 1;
+}
+
+
+static int yaffs_CheckpointErase(yaffs_Device *dev)
+{
+
+ int i;
+
+
+ if(!dev->eraseBlockInNAND)
+ return 0;
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+ dev->internalStartBlock,dev->internalEndBlock));
+
+ for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+ if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+ if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
+ bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ dev->nErasedBlocks++;
+ dev->nFreeChunks += dev->nChunksPerBlock;
+ }
+ else {
+ dev->markNANDBlockBad(dev,i);
+ bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ }
+ }
+ }
+
+ dev->blocksInCheckpoint = 0;
+
+ return 1;
+}
+
+
+static void yaffs_CheckpointFindNextErasedBlock(yaffs_Device *dev)
+{
+ int i;
+ int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ T(YAFFS_TRACE_CHECKPOINT,
+ (TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+ dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
+
+ if(dev->checkpointNextBlock >= 0 &&
+ dev->checkpointNextBlock <= dev->internalEndBlock &&
+ blocksAvailable > 0){
+
+ for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+ if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
+ dev->checkpointNextBlock = i + 1;
+ dev->checkpointCurrentBlock = i;
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
+ return;
+ }
+ }
+ }
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
+
+ dev->checkpointNextBlock = -1;
+ dev->checkpointCurrentBlock = -1;
+}
+
+static void yaffs_CheckpointFindNextCheckpointBlock(yaffs_Device *dev)
+{
+ int i;
+ yaffs_ExtendedTags tags;
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start: blocks %d next %d" TENDSTR),
+ dev->blocksInCheckpoint, dev->checkpointNextBlock));
+
+ if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+ for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+ int chunk = i * dev->nChunksPerBlock;
+ int realignedChunk = chunk - dev->chunkOffset;
+
+ dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+ i, tags.objectId,tags.sequenceNumber,tags.eccResult));
+
+ if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
+ /* Right kind of block */
+ dev->checkpointNextBlock = tags.objectId;
+ dev->checkpointCurrentBlock = i;
+ dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ dev->blocksInCheckpoint++;
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
+ return;
+ }
+ }
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
+
+ dev->checkpointNextBlock = -1;
+ dev->checkpointCurrentBlock = -1;
+}
+
+
+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting)
+{
+
+ /* Got the functions we need? */
+ if (!dev->writeChunkWithTagsToNAND ||
+ !dev->readChunkWithTagsFromNAND ||
+ !dev->eraseBlockInNAND ||
+ !dev->markNANDBlockBad)
+ return 0;
+
+ if(forWriting && !yaffs_CheckpointSpaceOk(dev))
+ return 0;
+
+ if(!dev->checkpointBuffer)
+ dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+ if(!dev->checkpointBuffer)
+ return 0;
+
+
+ dev->checkpointPageSequence = 0;
+
+ dev->checkpointOpenForWrite = forWriting;
+
+ dev->checkpointByteCount = 0;
+ dev->checkpointSum = 0;
+ dev->checkpointXor = 0;
+ dev->checkpointCurrentBlock = -1;
+ dev->checkpointCurrentChunk = -1;
+ dev->checkpointNextBlock = dev->internalStartBlock;
+
+ /* Erase all the blocks in the checkpoint area */
+ if(forWriting){
+ memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
+ dev->checkpointByteOffset = 0;
+ return yaffs_CheckpointErase(dev);
+
+
+ } else {
+ int i;
+ /* Set to a value that will kick off a read */
+ dev->checkpointByteOffset = dev->nDataBytesPerChunk;
+ /* A checkpoint block list of 1 checkpoint block per 16 block is (hopefully)
+ * going to be way more than we need */
+ dev->blocksInCheckpoint = 0;
+ dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+ for(i = 0; i < dev->checkpointMaxBlocks; i++)
+ dev->checkpointBlockList[i] = -1;
+ }
+
+ return 1;
+}
+
+int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum)
+{
+ __u32 compositeSum;
+ compositeSum = (dev->checkpointSum << 8) | (dev->checkpointXor & 0xFF);
+ *sum = compositeSum;
+ return 1;
+}
+
+static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+{
+
+ int chunk;
+ int realignedChunk;
+
+ yaffs_ExtendedTags tags;
+
+ if(dev->checkpointCurrentBlock < 0){
+ yaffs_CheckpointFindNextErasedBlock(dev);
+ dev->checkpointCurrentChunk = 0;
+ }
+
+ if(dev->checkpointCurrentBlock < 0)
+ return 0;
+
+ tags.chunkDeleted = 0;
+ tags.objectId = dev->checkpointNextBlock; /* Hint to next place to look */
+ tags.chunkId = dev->checkpointPageSequence + 1;
+ tags.sequenceNumber = YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ tags.byteCount = dev->nDataBytesPerChunk;
+ if(dev->checkpointCurrentChunk == 0){
+ /* First chunk we write for the block? Set block state to
+ checkpoint */
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
+ bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ dev->blocksInCheckpoint++;
+ }
+
+ chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+ chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
+
+ realignedChunk = chunk - dev->chunkOffset;
+
+ dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
+ dev->checkpointByteOffset = 0;
+ dev->checkpointPageSequence++;
+ dev->checkpointCurrentChunk++;
+ if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
+ dev->checkpointCurrentChunk = 0;
+ dev->checkpointCurrentBlock = -1;
+ }
+ memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
+
+ return 1;
+}
+
+
+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
+{
+ int i=0;
+ int ok = 1;
+
+
+ __u8 * dataBytes = (__u8 *)data;
+
+
+
+ if(!dev->checkpointBuffer)
+ return 0;
+
+ if(!dev->checkpointOpenForWrite)
+ return -1;
+
+ while(i < nBytes && ok) {
+
+
+
+ dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
+ dev->checkpointSum += *dataBytes;
+ dev->checkpointXor ^= *dataBytes;
+
+ dev->checkpointByteOffset++;
+ i++;
+ dataBytes++;
+ dev->checkpointByteCount++;
+
+
+ if(dev->checkpointByteOffset < 0 ||
+ dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ ok = yaffs_CheckpointFlushBuffer(dev);
+
+ }
+
+ return i;
+}
+
+int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+{
+ int i=0;
+ int ok = 1;
+ yaffs_ExtendedTags tags;
+
+
+ int chunk;
+ int realignedChunk;
+
+ __u8 *dataBytes = (__u8 *)data;
+
+ if(!dev->checkpointBuffer)
+ return 0;
+
+ if(dev->checkpointOpenForWrite)
+ return -1;
+
+ while(i < nBytes && ok) {
+
+
+ if(dev->checkpointByteOffset < 0 ||
+ dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+
+ if(dev->checkpointCurrentBlock < 0){
+ yaffs_CheckpointFindNextCheckpointBlock(dev);
+ dev->checkpointCurrentChunk = 0;
+ }
+
+ if(dev->checkpointCurrentBlock < 0)
+ ok = 0;
+ else {
+
+ chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+ dev->checkpointCurrentChunk;
+
+ realignedChunk = chunk - dev->chunkOffset;
+
+ /* read in the next chunk */
+ /* printf("read checkpoint page %d\n",dev->checkpointPage); */
+ dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+ dev->checkpointBuffer,
+ &tags);
+
+ if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+ tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ ok = 0;
+
+ dev->checkpointByteOffset = 0;
+ dev->checkpointPageSequence++;
+ dev->checkpointCurrentChunk++;
+
+ if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ dev->checkpointCurrentBlock = -1;
+ }
+ }
+
+ if(ok){
+ *dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ dev->checkpointSum += *dataBytes;
+ dev->checkpointXor ^= *dataBytes;
+ dev->checkpointByteOffset++;
+ i++;
+ dataBytes++;
+ dev->checkpointByteCount++;
+ }
+ }
+
+ return i;
+}
+
+int yaffs_CheckpointClose(yaffs_Device *dev)
+{
+
+ if(dev->checkpointOpenForWrite){
+ if(dev->checkpointByteOffset != 0)
+ yaffs_CheckpointFlushBuffer(dev);
+ } else {
+ int i;
+ for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+ if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ else {
+ // Todo this looks odd...
+ }
+ }
+ YFREE(dev->checkpointBlockList);
+ dev->checkpointBlockList = NULL;
+ }
+
+ dev->nFreeChunks -= dev->blocksInCheckpoint * dev->nChunksPerBlock;
+ dev->nErasedBlocks -= dev->blocksInCheckpoint;
+
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
+ dev->checkpointByteCount));
+
+ if(dev->checkpointBuffer){
+ /* free the buffer */
+ YFREE(dev->checkpointBuffer);
+ dev->checkpointBuffer = NULL;
+ return 1;
+ }
+ else
+ return 0;
+
+}
+
+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+{
+ /* Erase the first checksum block */
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
+
+ if(!yaffs_CheckpointSpaceOk(dev))
+ return 0;
+
+ return yaffs_CheckpointErase(dev);
+}
diff --git a/fs/yaffs2/yaffs_checkptrw.h b/fs/yaffs2/yaffs_checkptrw.h
new file mode 100644
index 0000000..f4b0c7d
--- /dev/null
+++ b/fs/yaffs2/yaffs_checkptrw.h
@@ -0,0 +1,35 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_CHECKPTRW_H__
+#define __YAFFS_CHECKPTRW_H__
+
+#include "yaffs_guts.h"
+
+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+
+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
+
+int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
+
+int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+
+int yaffs_CheckpointClose(yaffs_Device *dev);
+
+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev);
+
+
+#endif
+
diff --git a/fs/yaffs2/yaffs_ecc.c b/fs/yaffs2/yaffs_ecc.c
new file mode 100644
index 0000000..a05a6b5
--- /dev/null
+++ b/fs/yaffs2/yaffs_ecc.c
@@ -0,0 +1,333 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This code implements the ECC algorithm used in SmartMedia.
+ *
+ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+ * The two unused bit are set to 1.
+ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+ * blocks are used on a 512-byte NAND page.
+ *
+ */
+
+/* Table generated by gen-ecc.c
+ * Using a table means we do not have to calculate p1..p4 and p1'..p4'
+ * for each byte of data. These are instead provided in a table in bits7..2.
+ * Bit 0 of each entry indicates whether the entry has an odd or even parity, and therefore
+ * this bytes influence on the line parity.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+const char *yaffs_ecc_c_version =
+ "$Id: yaffs_ecc.c,v 1.9 2007/02/14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+#include "yaffs_ecc.h"
+
+static const unsigned char column_parity_table[] = {
+ 0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69,
+ 0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00,
+ 0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc,
+ 0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95,
+ 0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0,
+ 0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99,
+ 0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65,
+ 0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c,
+ 0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc,
+ 0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5,
+ 0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59,
+ 0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30,
+ 0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55,
+ 0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c,
+ 0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0,
+ 0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9,
+ 0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0,
+ 0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9,
+ 0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55,
+ 0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c,
+ 0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59,
+ 0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30,
+ 0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc,
+ 0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5,
+ 0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65,
+ 0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c,
+ 0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0,
+ 0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99,
+ 0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc,
+ 0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95,
+ 0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69,
+ 0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00,
+};
+
+/* Count the bits in an unsigned char or a U32 */
+
+static int yaffs_CountBits(unsigned char x)
+{
+ int r = 0;
+ while (x) {
+ if (x & 1)
+ r++;
+ x >>= 1;
+ }
+ return r;
+}
+
+static int yaffs_CountBits32(unsigned x)
+{
+ int r = 0;
+ while (x) {
+ if (x & 1)
+ r++;
+ x >>= 1;
+ }
+ return r;
+}
+
+/* Calculate the ECC for a 256-byte block of data */
+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc)
+{
+ unsigned int i;
+
+ unsigned char col_parity = 0;
+ unsigned char line_parity = 0;
+ unsigned char line_parity_prime = 0;
+ unsigned char t;
+ unsigned char b;
+
+ for (i = 0; i < 256; i++) {
+ b = column_parity_table[*data++];
+ col_parity ^= b;
+
+ if (b & 0x01) // odd number of bits in the byte
+ {
+ line_parity ^= i;
+ line_parity_prime ^= ~i;
+ }
+
+ }
+
+ ecc[2] = (~col_parity) | 0x03;
+
+ t = 0;
+ if (line_parity & 0x80)
+ t |= 0x80;
+ if (line_parity_prime & 0x80)
+ t |= 0x40;
+ if (line_parity & 0x40)
+ t |= 0x20;
+ if (line_parity_prime & 0x40)
+ t |= 0x10;
+ if (line_parity & 0x20)
+ t |= 0x08;
+ if (line_parity_prime & 0x20)
+ t |= 0x04;
+ if (line_parity & 0x10)
+ t |= 0x02;
+ if (line_parity_prime & 0x10)
+ t |= 0x01;
+ ecc[1] = ~t;
+
+ t = 0;
+ if (line_parity & 0x08)
+ t |= 0x80;
+ if (line_parity_prime & 0x08)
+ t |= 0x40;
+ if (line_parity & 0x04)
+ t |= 0x20;
+ if (line_parity_prime & 0x04)
+ t |= 0x10;
+ if (line_parity & 0x02)
+ t |= 0x08;
+ if (line_parity_prime & 0x02)
+ t |= 0x04;
+ if (line_parity & 0x01)
+ t |= 0x02;
+ if (line_parity_prime & 0x01)
+ t |= 0x01;
+ ecc[0] = ~t;
+
+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+ // Swap the bytes into the wrong order
+ t = ecc[0];
+ ecc[0] = ecc[1];
+ ecc[1] = t;
+#endif
+}
+
+
+/* Correct the ECC on a 256 byte block of data */
+
+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+ const unsigned char *test_ecc)
+{
+ unsigned char d0, d1, d2; /* deltas */
+
+ d0 = read_ecc[0] ^ test_ecc[0];
+ d1 = read_ecc[1] ^ test_ecc[1];
+ d2 = read_ecc[2] ^ test_ecc[2];
+
+ if ((d0 | d1 | d2) == 0)
+ return 0; /* no error */
+
+ if (((d0 ^ (d0 >> 1)) & 0x55) == 0x55 &&
+ ((d1 ^ (d1 >> 1)) & 0x55) == 0x55 &&
+ ((d2 ^ (d2 >> 1)) & 0x54) == 0x54) {
+ /* Single bit (recoverable) error in data */
+
+ unsigned byte;
+ unsigned bit;
+
+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+ // swap the bytes to correct for the wrong order
+ unsigned char t;
+
+ t = d0;
+ d0 = d1;
+ d1 = t;
+#endif
+
+ bit = byte = 0;
+
+ if (d1 & 0x80)
+ byte |= 0x80;
+ if (d1 & 0x20)
+ byte |= 0x40;
+ if (d1 & 0x08)
+ byte |= 0x20;
+ if (d1 & 0x02)
+ byte |= 0x10;
+ if (d0 & 0x80)
+ byte |= 0x08;
+ if (d0 & 0x20)
+ byte |= 0x04;
+ if (d0 & 0x08)
+ byte |= 0x02;
+ if (d0 & 0x02)
+ byte |= 0x01;
+
+ if (d2 & 0x80)
+ bit |= 0x04;
+ if (d2 & 0x20)
+ bit |= 0x02;
+ if (d2 & 0x08)
+ bit |= 0x01;
+
+ data[byte] ^= (1 << bit);
+
+ return 1; /* Corrected the error */
+ }
+
+ if ((yaffs_CountBits(d0) +
+ yaffs_CountBits(d1) +
+ yaffs_CountBits(d2)) == 1) {
+ /* Reccoverable error in ecc */
+
+ read_ecc[0] = test_ecc[0];
+ read_ecc[1] = test_ecc[1];
+ read_ecc[2] = test_ecc[2];
+
+ return 1; /* Corrected the error */
+ }
+
+ /* Unrecoverable error */
+
+ return -1;
+
+}
+
+
+/*
+ * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+ */
+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+ yaffs_ECCOther * eccOther)
+{
+ unsigned int i;
+
+ unsigned char col_parity = 0;
+ unsigned line_parity = 0;
+ unsigned line_parity_prime = 0;
+ unsigned char b;
+
+ for (i = 0; i < nBytes; i++) {
+ b = column_parity_table[*data++];
+ col_parity ^= b;
+
+ if (b & 0x01) {
+ /* odd number of bits in the byte */
+ line_parity ^= i;
+ line_parity_prime ^= ~i;
+ }
+
+ }
+
+ eccOther->colParity = (col_parity >> 2) & 0x3f;
+ eccOther->lineParity = line_parity;
+ eccOther->lineParityPrime = line_parity_prime;
+}
+
+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+ yaffs_ECCOther * read_ecc,
+ const yaffs_ECCOther * test_ecc)
+{
+ unsigned char cDelta; /* column parity delta */
+ unsigned lDelta; /* line parity delta */
+ unsigned lDeltaPrime; /* line parity delta */
+ unsigned bit;
+
+ cDelta = read_ecc->colParity ^ test_ecc->colParity;
+ lDelta = read_ecc->lineParity ^ test_ecc->lineParity;
+ lDeltaPrime = read_ecc->lineParityPrime ^ test_ecc->lineParityPrime;
+
+ if ((cDelta | lDelta | lDeltaPrime) == 0)
+ return 0; /* no error */
+
+ if (lDelta == ~lDeltaPrime &&
+ (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+ {
+ /* Single bit (recoverable) error in data */
+
+ bit = 0;
+
+ if (cDelta & 0x20)
+ bit |= 0x04;
+ if (cDelta & 0x08)
+ bit |= 0x02;
+ if (cDelta & 0x02)
+ bit |= 0x01;
+
+ if(lDelta >= nBytes)
+ return -1;
+
+ data[lDelta] ^= (1 << bit);
+
+ return 1; /* corrected */
+ }
+
+ if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+ yaffs_CountBits(cDelta)) == 1) {
+ /* Reccoverable error in ecc */
+
+ *read_ecc = *test_ecc;
+ return 1; /* corrected */
+ }
+
+ /* Unrecoverable error */
+
+ return -1;
+
+}
diff --git a/fs/yaffs2/yaffs_ecc.h b/fs/yaffs2/yaffs_ecc.h
new file mode 100644
index 0000000..40fd02b
--- /dev/null
+++ b/fs/yaffs2/yaffs_ecc.h
@@ -0,0 +1,44 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+ /*
+ * This code implements the ECC algorithm used in SmartMedia.
+ *
+ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+ * The two unused bit are set to 1.
+ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+ * blocks are used on a 512-byte NAND page.
+ *
+ */
+
+#ifndef __YAFFS_ECC_H__
+#define __YAFFS_ECC_H__
+
+typedef struct {
+ unsigned char colParity;
+ unsigned lineParity;
+ unsigned lineParityPrime;
+} yaffs_ECCOther;
+
+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+ const unsigned char *test_ecc);
+
+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+ yaffs_ECCOther * ecc);
+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+ yaffs_ECCOther * read_ecc,
+ const yaffs_ECCOther * test_ecc);
+#endif
diff --git a/fs/yaffs2/yaffs_flashif.h b/fs/yaffs2/yaffs_flashif.h
new file mode 100644
index 0000000..f7f4e42
--- /dev/null
+++ b/fs/yaffs2/yaffs_flashif.h
@@ -0,0 +1,31 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_FLASH_H__
+#define __YAFFS_FLASH_H__
+
+
+#include "yaffs_guts.h"
+int yflash_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
+int yflash_WriteChunkToNAND(yaffs_Device *dev,int chunkInNAND,const __u8 *data, const yaffs_Spare *spare);
+int yflash_WriteChunkWithTagsToNAND(yaffs_Device *dev,int chunkInNAND,const __u8 *data, yaffs_ExtendedTags *tags);
+int yflash_ReadChunkFromNAND(yaffs_Device *dev,int chunkInNAND, __u8 *data, yaffs_Spare *spare);
+int yflash_ReadChunkWithTagsFromNAND(yaffs_Device *dev,int chunkInNAND, __u8 *data, yaffs_ExtendedTags *tags);
+int yflash_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
+int yflash_InitialiseNAND(yaffs_Device *dev);
+int yflash_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+int yflash_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo, yaffs_BlockState *state, int *sequenceNumber);
+
+#endif
diff --git a/fs/yaffs2/yaffs_guts.c b/fs/yaffs2/yaffs_guts.c
new file mode 100644
index 0000000..7dc62ef
--- /dev/null
+++ b/fs/yaffs2/yaffs_guts.c
@@ -0,0 +1,7491 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+const char *yaffs_guts_c_version =
+ "$Id: yaffs_guts.c,v 1.52 2007/10/16 00:45:05 charles Exp $";
+
+#include "yportenv.h"
+#include "linux/stat.h"
+
+#include "yaffsinterface.h"
+#include "yaffsfs.h"
+#include "yaffs_guts.h"
+#include "yaffs_tagsvalidity.h"
+
+#include "yaffs_tagscompat.h"
+#ifndef CONFIG_YAFFS_USE_OWN_SORT
+#include "yaffs_qsort.h"
+#endif
+#include "yaffs_nand.h"
+
+#include "yaffs_checkptrw.h"
+
+#include "yaffs_nand.h"
+#include "yaffs_packedtags2.h"
+
+#include "malloc.h"
+
+#ifdef CONFIG_YAFFS_WINCE
+void yfsd_LockYAFFS(BOOL fsLockOnly);
+void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+#endif
+
+#define YAFFS_PASSIVE_GC_CHUNKS 2
+
+#include "yaffs_ecc.h"
+
+
+/* Robustification (if it ever comes about...) */
+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags * tags);
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+ const yaffs_ExtendedTags * tags);
+
+/* Other local prototypes */
+static int yaffs_UnlinkObject( yaffs_Object *obj);
+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+
+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+
+static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+ const __u8 * buffer,
+ yaffs_ExtendedTags * tags,
+ int useReserve);
+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+ int chunkInNAND, int inScan);
+
+static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+ yaffs_ObjectType type);
+static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+ yaffs_Object * obj);
+static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+ int force, int isShrink, int shadows);
+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
+static int yaffs_CheckStructures(void);
+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+ int chunkOffset, int *limit);
+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+
+static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+
+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+ int lineNo);
+
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND);
+
+static int yaffs_UnlinkWorker(yaffs_Object * obj);
+static void yaffs_DestroyObject(yaffs_Object * obj);
+
+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+ int chunkInObject);
+
+loff_t yaffs_GetFileSize(yaffs_Object * obj);
+
+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
+
+static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
+
+static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+
+#ifdef YAFFS_PARANOID
+static int yaffs_CheckFileSanity(yaffs_Object * in);
+#else
+#define yaffs_CheckFileSanity(in)
+#endif
+
+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
+
+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+
+static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+ yaffs_ExtendedTags * tags);
+
+static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+ yaffs_FileStructure * fStruct,
+ __u32 chunkId);
+
+
+/* Function to calculate chunk and offset */
+
+static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
+{
+ if(dev->chunkShift){
+ /* Easy-peasy power of 2 case */
+ *chunk = (__u32)(addr >> dev->chunkShift);
+ *offset = (__u32)(addr & dev->chunkMask);
+ }
+ else if(dev->crumbsPerChunk)
+ {
+ /* Case where we're using "crumbs" */
+ *offset = (__u32)(addr & dev->crumbMask);
+ addr >>= dev->crumbShift;
+ *chunk = ((__u32)addr)/dev->crumbsPerChunk;
+ *offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
+ }
+ else
+ YBUG();
+}
+
+/* Function to return the number of shifts for a power of 2 greater than or equal
+ * to the given number
+ * Note we don't try to cater for all possible numbers and this does not have to
+ * be hellishly efficient.
+ */
+
+static __u32 ShiftsGE(__u32 x)
+{
+ int extraBits;
+ int nShifts;
+
+ nShifts = extraBits = 0;
+
+ while(x>1){
+ if(x & 1) extraBits++;
+ x>>=1;
+ nShifts++;
+ }
+
+ if(extraBits)
+ nShifts++;
+
+ return nShifts;
+}
+
+/* Function to return the number of shifts to get a 1 in bit 0
+ */
+
+static __u32 ShiftDiv(__u32 x)
+{
+ int nShifts;
+
+ nShifts = 0;
+
+ if(!x) return 0;
+
+ while( !(x&1)){
+ x>>=1;
+ nShifts++;
+ }
+
+ return nShifts;
+}
+
+
+
+/*
+ * Temporary buffer manipulations.
+ */
+
+static int yaffs_InitialiseTempBuffers(yaffs_Device *dev)
+{
+ int i;
+ __u8 *buf = (__u8 *)1;
+
+ memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
+
+ for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ dev->tempBuffer[i].line = 0; /* not in use */
+ dev->tempBuffer[i].buffer = buf =
+ YMALLOC_DMA(dev->nDataBytesPerChunk);
+ }
+
+ return buf ? YAFFS_OK : YAFFS_FAIL;
+
+}
+
+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
+{
+ int i, j;
+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ if (dev->tempBuffer[i].line == 0) {
+ dev->tempBuffer[i].line = lineNo;
+ if ((i + 1) > dev->maxTemp) {
+ dev->maxTemp = i + 1;
+ for (j = 0; j <= i; j++)
+ dev->tempBuffer[j].maxLine =
+ dev->tempBuffer[j].line;
+ }
+
+ return dev->tempBuffer[i].buffer;
+ }
+ }
+
+ T(YAFFS_TRACE_BUFFERS,
+ (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ lineNo));
+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+ }
+ T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+
+ /*
+ * If we got here then we have to allocate an unmanaged one
+ * This is not good.
+ */
+
+ dev->unmanagedTempAllocations++;
+ return YMALLOC(dev->nDataBytesPerChunk);
+
+}
+
+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+ int lineNo)
+{
+ int i;
+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ if (dev->tempBuffer[i].buffer == buffer) {
+ dev->tempBuffer[i].line = 0;
+ return;
+ }
+ }
+
+ if (buffer) {
+ /* assume it is an unmanaged one. */
+ T(YAFFS_TRACE_BUFFERS,
+ (TSTR("Releasing unmanaged temp buffer in line %d" TENDSTR),
+ lineNo));
+ YFREE(buffer);
+ dev->unmanagedTempDeallocations++;
+ }
+
+}
+
+/*
+ * Determine if we have a managed buffer.
+ */
+int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
+{
+ int i;
+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ if (dev->tempBuffer[i].buffer == buffer)
+ return 1;
+
+ }
+
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if( dev->srCache[i].data == buffer )
+ return 1;
+
+ }
+
+ if (buffer == dev->checkpointBuffer)
+ return 1;
+
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+ return 0;
+}
+
+
+
+/*
+ * Chunk bitmap manipulations
+ */
+
+static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
+{
+ if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+ blk));
+ YBUG();
+ }
+ return dev->chunkBits +
+ (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+}
+
+static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+{
+ if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+ chunk < 0 || chunk >= dev->nChunksPerBlock) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+ YBUG();
+ }
+}
+
+static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+ memset(blkBits, 0, dev->chunkBitmapStride);
+}
+
+static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+ yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+ blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+}
+
+static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+ yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+ blkBits[chunk / 8] |= (1 << (chunk & 7));
+}
+
+static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+ yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+ return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+}
+
+static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+ int i;
+ for (i = 0; i < dev->chunkBitmapStride; i++) {
+ if (*blkBits)
+ return 1;
+ blkBits++;
+ }
+ return 0;
+}
+
+static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
+{
+ __u8 *blkBits = yaffs_BlockBits(dev, blk);
+ int i;
+ int n = 0;
+ for (i = 0; i < dev->chunkBitmapStride; i++) {
+ __u8 x = *blkBits;
+ while(x){
+ if(x & 1)
+ n++;
+ x >>=1;
+ }
+
+ blkBits++;
+ }
+ return n;
+}
+
+/*
+ * Verification code
+ */
+
+static int yaffs_SkipVerification(yaffs_Device *dev)
+{
+ return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY | YAFFS_TRACE_VERIFY_FULL));
+}
+
+static int yaffs_SkipFullVerification(yaffs_Device *dev)
+{
+ return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_FULL));
+}
+
+static int yaffs_SkipNANDVerification(yaffs_Device *dev)
+{
+ return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+}
+
+static const char * blockStateName[] = {
+"Unknown",
+"Needs scanning",
+"Scanning",
+"Empty",
+"Allocating",
+"Full",
+"Dirty",
+"Checkpoint",
+"Collecting",
+"Dead"
+};
+
+static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
+{
+ int actuallyUsed;
+ int inUse;
+
+ if(yaffs_SkipVerification(dev))
+ return;
+
+ /* Report illegal runtime states */
+ if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
+
+ switch(bi->blockState){
+ case YAFFS_BLOCK_STATE_UNKNOWN:
+ case YAFFS_BLOCK_STATE_SCANNING:
+ case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+ n,blockStateName[bi->blockState]));
+ }
+
+ /* Check pages in use and soft deletions are legal */
+
+ actuallyUsed = bi->pagesInUse - bi->softDeletions;
+
+ if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+ n,bi->pagesInUse,bi->softDeletions));
+
+
+ /* Check chunk bitmap legal */
+ inUse = yaffs_CountChunkBits(dev,n);
+ if(inUse != bi->pagesInUse)
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+ n,bi->pagesInUse,inUse));
+
+ /* Check that the sequence number is valid.
+ * Ten million is legal, but is very unlikely
+ */
+ if(dev->isYaffs2 &&
+ (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+ (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+ n,bi->sequenceNumber));
+
+}
+
+static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
+{
+ yaffs_VerifyBlock(dev,bi,n);
+
+ /* After collection the block should be in the erased state */
+ /* TODO: This will need to change if we do partial gc */
+
+ if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+ T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+ n,bi->blockState));
+ }
+}
+
+static void yaffs_VerifyBlocks(yaffs_Device *dev)
+{
+ int i;
+ int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ int nIllegalBlockStates = 0;
+
+
+ if(yaffs_SkipVerification(dev))
+ return;
+
+ memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+
+
+ for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+ yaffs_VerifyBlock(dev,bi,i);
+
+ if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ nBlocksPerState[bi->blockState]++;
+ else
+ nIllegalBlockStates++;
+
+ }
+
+ T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+ T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
+
+ T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+ if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+ T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
+
+ for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("%s %d blocks"TENDSTR),
+ blockStateName[i],nBlocksPerState[i]));
+
+ if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+
+ if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+
+ if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+
+ T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+
+}
+
+/*
+ * Verify the object header. oh must be valid, but obj and tags may be NULL in which
+ * case those tests will not be performed.
+ */
+static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+{
+ if(yaffs_SkipVerification(obj->myDev))
+ return;
+
+ if(!(tags && obj && oh)){
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+ (__u32)tags,(__u32)obj,(__u32)oh));
+ return;
+ }
+
+ if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+ oh->type > YAFFS_OBJECT_TYPE_MAX)
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+ tags->objectId, oh->type));
+
+ if(tags->objectId != obj->objectId)
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+ tags->objectId, obj->objectId));
+
+
+ /*
+ * Check that the object's parent ids match if parentCheck requested.
+ *
+ * Tests do not apply to the root object.
+ */
+
+ if(parentCheck && tags->objectId > 1 && !obj->parent)
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+ tags->objectId, oh->parentObjectId));
+
+
+ if(parentCheck && obj->parent &&
+ oh->parentObjectId != obj->parent->objectId &&
+ (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+ obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+ tags->objectId, oh->parentObjectId, obj->parent->objectId));
+
+
+ if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header name is NULL"TENDSTR),
+ obj->objectId));
+
+ if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d header name is 0xFF"TENDSTR),
+ obj->objectId));
+}
+
+
+
+static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+ __u32 level, int chunkOffset)
+{
+ int i;
+ yaffs_Device *dev = obj->myDev;
+ int ok = 1;
+
+ if (tn) {
+ if (level > 0) {
+
+ for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
+ if (tn->internal[i]) {
+ ok = yaffs_VerifyTnodeWorker(obj,
+ tn->internal[i],
+ level - 1,
+ (chunkOffset<<YAFFS_TNODES_INTERNAL_BITS) + i);
+ }
+ }
+ } else if (level == 0) {
+ int i;
+ yaffs_ExtendedTags tags;
+ __u32 objectId = obj->objectId;
+
+ chunkOffset <<= YAFFS_TNODES_LEVEL0_BITS;
+
+ for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+ __u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+
+ if(theChunk > 0){
+ /* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+ yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+ if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+ T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ objectId, chunkOffset, theChunk,
+ tags.objectId, tags.chunkId));
+ }
+ }
+ chunkOffset++;
+ }
+ }
+ }
+
+ return ok;
+
+}
+
+
+static void yaffs_VerifyFile(yaffs_Object *obj)
+{
+ int requiredTallness;
+ int actualTallness;
+ __u32 lastChunk;
+ __u32 x;
+ __u32 i;
+ yaffs_Device *dev;
+ yaffs_ExtendedTags tags;
+ yaffs_Tnode *tn;
+ __u32 objectId;
+
+ if(obj && yaffs_SkipVerification(obj->myDev))
+ return;
+
+ dev = obj->myDev;
+ objectId = obj->objectId;
+
+ /* Check file size is consistent with tnode depth */
+ lastChunk = obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ requiredTallness = 0;
+ while (x> 0) {
+ x >>= YAFFS_TNODES_INTERNAL_BITS;
+ requiredTallness++;
+ }
+
+ actualTallness = obj->variant.fileVariant.topLevel;
+
+ if(requiredTallness > actualTallness )
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+ obj->objectId,actualTallness, requiredTallness));
+
+
+ /* Check that the chunks in the tnode tree are all correct.
+ * We do this by scanning through the tnode tree and
+ * checking the tags for every chunk match.
+ */
+
+ if(yaffs_SkipNANDVerification(dev))
+ return;
+
+ for(i = 1; i <= lastChunk; i++){
+ tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
+
+ if (tn) {
+ __u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+ if(theChunk > 0){
+ /* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+ yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+ if(tags.objectId != objectId || tags.chunkId != i){
+ T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ objectId, i, theChunk,
+ tags.objectId, tags.chunkId));
+ }
+ }
+ }
+
+ }
+
+}
+
+static void yaffs_VerifyDirectory(yaffs_Object *obj)
+{
+ if(obj && yaffs_SkipVerification(obj->myDev))
+ return;
+
+}
+
+static void yaffs_VerifyHardLink(yaffs_Object *obj)
+{
+ if(obj && yaffs_SkipVerification(obj->myDev))
+ return;
+
+ /* Verify sane equivalent object */
+}
+
+static void yaffs_VerifySymlink(yaffs_Object *obj)
+{
+ if(obj && yaffs_SkipVerification(obj->myDev))
+ return;
+
+ /* Verify symlink string */
+}
+
+static void yaffs_VerifySpecial(yaffs_Object *obj)
+{
+ if(obj && yaffs_SkipVerification(obj->myDev))
+ return;
+}
+
+static void yaffs_VerifyObject(yaffs_Object *obj)
+{
+ yaffs_Device *dev;
+
+ __u32 chunkMin;
+ __u32 chunkMax;
+
+ __u32 chunkIdOk;
+ __u32 chunkIsLive;
+
+ if(!obj)
+ return;
+
+ dev = obj->myDev;
+
+ if(yaffs_SkipVerification(dev))
+ return;
+
+ /* Check sane object header chunk */
+
+ chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+
+ chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+ chunkIsLive = chunkIdOk &&
+ yaffs_CheckChunkBit(dev,
+ obj->chunkId / dev->nChunksPerBlock,
+ obj->chunkId % dev->nChunksPerBlock);
+ if(!obj->fake &&
+ (!chunkIdOk || !chunkIsLive)) {
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+ obj->objectId,obj->chunkId,
+ chunkIdOk ? "" : ",out of range",
+ chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
+ }
+
+ if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
+ yaffs_ExtendedTags tags;
+ yaffs_ObjectHeader *oh;
+ __u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
+
+ oh = (yaffs_ObjectHeader *)buffer;
+
+ yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
+
+ yaffs_VerifyObjectHeader(obj,oh,&tags,1);
+
+ yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
+ }
+
+ /* Verify it has a parent */
+ if(obj && !obj->fake &&
+ (!obj->parent || obj->parent->myDev != dev)){
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+ obj->objectId,obj->parent));
+ }
+
+ /* Verify parent is a directory */
+ if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+ obj->objectId,obj->parent->variantType));
+ }
+
+ switch(obj->variantType){
+ case YAFFS_OBJECT_TYPE_FILE:
+ yaffs_VerifyFile(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ yaffs_VerifySymlink(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ yaffs_VerifyDirectory(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ yaffs_VerifyHardLink(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ yaffs_VerifySpecial(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ default:
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Obj %d has illegaltype %d"TENDSTR),
+ obj->objectId,obj->variantType));
+ break;
+ }
+
+
+}
+
+static void yaffs_VerifyObjects(yaffs_Device *dev)
+{
+ yaffs_Object *obj;
+ int i;
+ struct list_head *lh;
+
+ if(yaffs_SkipVerification(dev))
+ return;
+
+ /* Iterate through the objects in each hash entry */
+
+ for(i = 0; i < YAFFS_NOBJECT_BUCKETS; i++){
+ list_for_each(lh, &dev->objectBucket[i].list) {
+ if (lh) {
+ obj = list_entry(lh, yaffs_Object, hashLink);
+ yaffs_VerifyObject(obj);
+ }
+ }
+ }
+
+}
+
+
+/*
+ * Simple hash function. Needs to have a reasonable spread
+ */
+
+static Y_INLINE int yaffs_HashFunction(int n)
+{
+/* XXX U-BOOT XXX */
+ /*n = abs(n); */
+ if (n < 0)
+ n = -n;
+ return (n % YAFFS_NOBJECT_BUCKETS);
+}
+
+/*
+ * Access functions to useful fake objects
+ */
+
+yaffs_Object *yaffs_Root(yaffs_Device * dev)
+{
+ return dev->rootDir;
+}
+
+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
+{
+ return dev->lostNFoundDir;
+}
+
+
+/*
+ * Erased NAND checking functions
+ */
+
+int yaffs_CheckFF(__u8 * buffer, int nBytes)
+{
+ /* Horrible, slow implementation */
+ while (nBytes--) {
+ if (*buffer != 0xFF)
+ return 0;
+ buffer++;
+ }
+ return 1;
+}
+
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND)
+{
+
+ int retval = YAFFS_OK;
+ __u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ yaffs_ExtendedTags tags;
+ int result;
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+
+ if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ retval = YAFFS_FAIL;
+
+
+ if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ T(YAFFS_TRACE_NANDACCESS,
+ (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+ retval = YAFFS_FAIL;
+ }
+
+ yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+
+ return retval;
+
+}
+
+static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+ const __u8 * data,
+ yaffs_ExtendedTags * tags,
+ int useReserve)
+{
+ int attempts = 0;
+ int writeOk = 0;
+ int chunk;
+
+ yaffs_InvalidateCheckpoint(dev);
+
+ do {
+ yaffs_BlockInfo *bi = 0;
+ int erasedOk = 0;
+
+ chunk = yaffs_AllocateChunk(dev, useReserve, &bi);
+ if (chunk < 0) {
+ /* no space */
+ break;
+ }
+
+ /* First check this chunk is erased, if it needs
+ * checking. The checking policy (unless forced
+ * always on) is as follows:
+ *
+ * Check the first page we try to write in a block.
+ * If the check passes then we don't need to check any
+ * more. If the check fails, we check again...
+ * If the block has been erased, we don't need to check.
+ *
+ * However, if the block has been prioritised for gc,
+ * then we think there might be something odd about
+ * this block and stop using it.
+ *
+ * Rationale: We should only ever see chunks that have
+ * not been erased if there was a partially written
+ * chunk due to power loss. This checking policy should
+ * catch that case with very few checks and thus save a
+ * lot of checks that are most likely not needed.
+ */
+ if (bi->gcPrioritise) {
+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ /* try another chunk */
+ continue;
+ }
+
+ /* let's give it a try */
+ attempts++;
+
+#ifdef CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED
+ bi->skipErasedCheck = 0;
+#endif
+ if (!bi->skipErasedCheck) {
+ erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ if (erasedOk != YAFFS_OK) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR ("**>> yaffs chunk %d was not erased"
+ TENDSTR), chunk));
+
+ /* try another chunk */
+ continue;
+ }
+ bi->skipErasedCheck = 1;
+ }
+
+ writeOk = yaffs_WriteChunkWithTagsToNAND(dev, chunk,
+ data, tags);
+ if (writeOk != YAFFS_OK) {
+ yaffs_HandleWriteChunkError(dev, chunk, erasedOk);
+ /* try another chunk */
+ continue;
+ }
+
+ /* Copy the data into the robustification buffer */
+ yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+
+ } while (writeOk != YAFFS_OK &&
+ (yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
+
+ if(!writeOk)
+ chunk = -1;
+
+ if (attempts > 1) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("**>> yaffs write required %d attempts" TENDSTR),
+ attempts));
+
+ dev->nRetriedWrites += (attempts - 1);
+ }
+
+ return chunk;
+}
+
+/*
+ * Block retiring for handling a broken block.
+ */
+
+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
+{
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+
+ yaffs_InvalidateCheckpoint(dev);
+
+ yaffs_MarkBlockBad(dev, blockInNAND);
+
+ bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ bi->gcPrioritise = 0;
+ bi->needsRetiring = 0;
+
+ dev->nRetiredBlocks++;
+}
+
+/*
+ * Functions for robustisizing TODO
+ *
+ */
+
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags * tags)
+{
+}
+
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+ const yaffs_ExtendedTags * tags)
+{
+}
+
+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+{
+ if(!bi->gcPrioritise){
+ bi->gcPrioritise = 1;
+ dev->hasPendingPrioritisedGCs = 1;
+ bi->chunkErrorStrikes ++;
+
+ if(bi->chunkErrorStrikes > 3){
+ bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+
+ }
+
+ }
+}
+
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
+{
+
+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+
+ yaffs_HandleChunkError(dev,bi);
+
+
+ if(erasedOk ) {
+ /* Was an actual write failure, so mark the block for retirement */
+ bi->needsRetiring = 1;
+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+
+
+ }
+
+ /* Delete the chunk */
+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+}
+
+
+/*---------------- Name handling functions ------------*/
+
+static __u16 yaffs_CalcNameSum(const YCHAR * name)
+{
+ __u16 sum = 0;
+ __u16 i = 1;
+
+ YUCHAR *bname = (YUCHAR *) name;
+ if (bname) {
+ while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+
+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ sum += yaffs_toupper(*bname) * i;
+#else
+ sum += (*bname) * i;
+#endif
+ i++;
+ bname++;
+ }
+ }
+ return sum;
+}
+
+static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
+{
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+ if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
+ yaffs_strcpy(obj->shortName, name);
+ } else {
+ obj->shortName[0] = _Y('\0');
+ }
+#endif
+ obj->sum = yaffs_CalcNameSum(name);
+}
+
+/*-------------------- TNODES -------------------
+
+ * List of spare tnodes
+ * The list is hooked together using the first pointer
+ * in the tnode.
+ */
+
+/* yaffs_CreateTnodes creates a bunch more tnodes and
+ * adds them to the tnode free list.
+ * Don't use this function directly
+ */
+
+static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
+{
+ int i;
+ int tnodeSize;
+ yaffs_Tnode *newTnodes;
+ __u8 *mem;
+ yaffs_Tnode *curr;
+ yaffs_Tnode *next;
+ yaffs_TnodeList *tnl;
+
+ if (nTnodes < 1)
+ return YAFFS_OK;
+
+ /* Calculate the tnode size in bytes for variable width tnode support.
+ * Must be a multiple of 32-bits */
+ tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+
+ /* make these things */
+
+ newTnodes = YMALLOC(nTnodes * tnodeSize);
+ mem = (__u8 *)newTnodes;
+
+ if (!newTnodes) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ /* Hook them into the free list */
+#if 0
+ for (i = 0; i < nTnodes - 1; i++) {
+ newTnodes[i].internal[0] = &newTnodes[i + 1];
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ newTnodes[i].internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+ }
+
+ newTnodes[nTnodes - 1].internal[0] = dev->freeTnodes;
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ newTnodes[nTnodes - 1].internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+ dev->freeTnodes = newTnodes;
+#else
+ /* New hookup for wide tnodes */
+ for(i = 0; i < nTnodes -1; i++) {
+ curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ curr->internal[0] = next;
+ }
+
+ curr = (yaffs_Tnode *) &mem[(nTnodes - 1) * tnodeSize];
+ curr->internal[0] = dev->freeTnodes;
+ dev->freeTnodes = (yaffs_Tnode *)mem;
+
+#endif
+
+
+ dev->nFreeTnodes += nTnodes;
+ dev->nTnodesCreated += nTnodes;
+
+ /* Now add this bunch of tnodes to a list for freeing up.
+ * NB If we can't add this to the management list it isn't fatal
+ * but it just means we can't free this bunch of tnodes later.
+ */
+
+ tnl = YMALLOC(sizeof(yaffs_TnodeList));
+ if (!tnl) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ return YAFFS_FAIL;
+
+ } else {
+ tnl->tnodes = newTnodes;
+ tnl->next = dev->allocatedTnodeList;
+ dev->allocatedTnodeList = tnl;
+ }
+
+ T(YAFFS_TRACE_ALLOCATE, (TSTR("yaffs: Tnodes added" TENDSTR)));
+
+ return YAFFS_OK;
+}
+
+/* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+
+static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
+{
+ yaffs_Tnode *tn = NULL;
+
+ /* If there are none left make more */
+ if (!dev->freeTnodes) {
+ yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+ }
+
+ if (dev->freeTnodes) {
+ tn = dev->freeTnodes;
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ if (tn->internal[YAFFS_NTNODES_INTERNAL] != (void *)1) {
+ /* Hoosterman, this thing looks like it isn't in the list */
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: Tnode list bug 1" TENDSTR)));
+ }
+#endif
+ dev->freeTnodes = dev->freeTnodes->internal[0];
+ dev->nFreeTnodes--;
+ }
+
+ return tn;
+}
+
+static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
+{
+ yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
+
+ if(tn)
+ memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+
+ return tn;
+}
+
+/* FreeTnode frees up a tnode and puts it back on the free list */
+static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
+{
+ if (tn) {
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ if (tn->internal[YAFFS_NTNODES_INTERNAL] != 0) {
+ /* Hoosterman, this thing looks like it is already in the list */
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: Tnode list bug 2" TENDSTR)));
+ }
+ tn->internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+ tn->internal[0] = dev->freeTnodes;
+ dev->freeTnodes = tn;
+ dev->nFreeTnodes++;
+ }
+}
+
+static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
+{
+ /* Free the list of allocated tnodes */
+ yaffs_TnodeList *tmp;
+
+ while (dev->allocatedTnodeList) {
+ tmp = dev->allocatedTnodeList->next;
+
+ YFREE(dev->allocatedTnodeList->tnodes);
+ YFREE(dev->allocatedTnodeList);
+ dev->allocatedTnodeList = tmp;
+
+ }
+
+ dev->freeTnodes = NULL;
+ dev->nFreeTnodes = 0;
+}
+
+static void yaffs_InitialiseTnodes(yaffs_Device * dev)
+{
+ dev->allocatedTnodeList = NULL;
+ dev->freeTnodes = NULL;
+ dev->nFreeTnodes = 0;
+ dev->nTnodesCreated = 0;
+
+}
+
+
+void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
+{
+ __u32 *map = (__u32 *)tn;
+ __u32 bitInMap;
+ __u32 bitInWord;
+ __u32 wordInMap;
+ __u32 mask;
+
+ pos &= YAFFS_TNODES_LEVEL0_MASK;
+ val >>= dev->chunkGroupBits;
+
+ bitInMap = pos * dev->tnodeWidth;
+ wordInMap = bitInMap /32;
+ bitInWord = bitInMap & (32 -1);
+
+ mask = dev->tnodeMask << bitInWord;
+
+ map[wordInMap] &= ~mask;
+ map[wordInMap] |= (mask & (val << bitInWord));
+
+ if(dev->tnodeWidth > (32-bitInWord)) {
+ bitInWord = (32 - bitInWord);
+ wordInMap++;;
+ mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+ map[wordInMap] &= ~mask;
+ map[wordInMap] |= (mask & (val >> bitInWord));
+ }
+}
+
+static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
+{
+ __u32 *map = (__u32 *)tn;
+ __u32 bitInMap;
+ __u32 bitInWord;
+ __u32 wordInMap;
+ __u32 val;
+
+ pos &= YAFFS_TNODES_LEVEL0_MASK;
+
+ bitInMap = pos * dev->tnodeWidth;
+ wordInMap = bitInMap /32;
+ bitInWord = bitInMap & (32 -1);
+
+ val = map[wordInMap] >> bitInWord;
+
+ if(dev->tnodeWidth > (32-bitInWord)) {
+ bitInWord = (32 - bitInWord);
+ wordInMap++;;
+ val |= (map[wordInMap] << bitInWord);
+ }
+
+ val &= dev->tnodeMask;
+ val <<= dev->chunkGroupBits;
+
+ return val;
+}
+
+/* ------------------- End of individual tnode manipulation -----------------*/
+
+/* ---------Functions to manipulate the look-up tree (made up of tnodes) ------
+ * The look up tree is represented by the top tnode and the number of topLevel
+ * in the tree. 0 means only the level 0 tnode is in the tree.
+ */
+
+/* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+ yaffs_FileStructure * fStruct,
+ __u32 chunkId)
+{
+
+ yaffs_Tnode *tn = fStruct->top;
+ __u32 i;
+ int requiredTallness;
+ int level = fStruct->topLevel;
+
+ /* Check sane level and chunk Id */
+ if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
+ return NULL;
+ }
+
+ if (chunkId > YAFFS_MAX_CHUNK_ID) {
+ return NULL;
+ }
+
+ /* First check we're tall enough (ie enough topLevel) */
+
+ i = chunkId >> YAFFS_TNODES_LEVEL0_BITS;
+ requiredTallness = 0;
+ while (i) {
+ i >>= YAFFS_TNODES_INTERNAL_BITS;
+ requiredTallness++;
+ }
+
+ if (requiredTallness > fStruct->topLevel) {
+ /* Not tall enough, so we can't find it, return NULL. */
+ return NULL;
+ }
+
+ /* Traverse down to level 0 */
+ while (level > 0 && tn) {
+ tn = tn->
+ internal[(chunkId >>
+ ( YAFFS_TNODES_LEVEL0_BITS +
+ (level - 1) *
+ YAFFS_TNODES_INTERNAL_BITS)
+ ) &
+ YAFFS_TNODES_INTERNAL_MASK];
+ level--;
+
+ }
+
+ return tn;
+}
+
+/* AddOrFindLevel0Tnode finds the level 0 tnode if it exists, otherwise first expands the tree.
+ * This happens in two steps:
+ * 1. If the tree isn't tall enough, then make it taller.
+ * 2. Scan down the tree towards the level 0 tnode adding tnodes if required.
+ *
+ * Used when modifying the tree.
+ *
+ * If the tn argument is NULL, then a fresh tnode will be added otherwise the specified tn will
+ * be plugged into the ttree.
+ */
+
+static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+ yaffs_FileStructure * fStruct,
+ __u32 chunkId,
+ yaffs_Tnode *passedTn)
+{
+
+ int requiredTallness;
+ int i;
+ int l;
+ yaffs_Tnode *tn;
+
+ __u32 x;
+
+
+ /* Check sane level and page Id */
+ if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
+ return NULL;
+ }
+
+ if (chunkId > YAFFS_MAX_CHUNK_ID) {
+ return NULL;
+ }
+
+ /* First check we're tall enough (ie enough topLevel) */
+
+ x = chunkId >> YAFFS_TNODES_LEVEL0_BITS;
+ requiredTallness = 0;
+ while (x) {
+ x >>= YAFFS_TNODES_INTERNAL_BITS;
+ requiredTallness++;
+ }
+
+
+ if (requiredTallness > fStruct->topLevel) {
+ /* Not tall enough,gotta make the tree taller */
+ for (i = fStruct->topLevel; i < requiredTallness; i++) {
+
+ tn = yaffs_GetTnode(dev);
+
+ if (tn) {
+ tn->internal[0] = fStruct->top;
+ fStruct->top = tn;
+ } else {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("yaffs: no more tnodes" TENDSTR)));
+ }
+ }
+
+ fStruct->topLevel = requiredTallness;
+ }
+
+ /* Traverse down to level 0, adding anything we need */
+
+ l = fStruct->topLevel;
+ tn = fStruct->top;
+
+ if(l > 0) {
+ while (l > 0 && tn) {
+ x = (chunkId >>
+ ( YAFFS_TNODES_LEVEL0_BITS +
+ (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ YAFFS_TNODES_INTERNAL_MASK;
+
+
+ if((l>1) && !tn->internal[x]){
+ /* Add missing non-level-zero tnode */
+ tn->internal[x] = yaffs_GetTnode(dev);
+
+ } else if(l == 1) {
+ /* Looking from level 1 at level 0 */
+ if (passedTn) {
+ /* If we already have one, then release it.*/
+ if(tn->internal[x])
+ yaffs_FreeTnode(dev,tn->internal[x]);
+ tn->internal[x] = passedTn;
+
+ } else if(!tn->internal[x]) {
+ /* Don't have one, none passed in */
+ tn->internal[x] = yaffs_GetTnode(dev);
+ }
+ }
+
+ tn = tn->internal[x];
+ l--;
+ }
+ } else {
+ /* top is level 0 */
+ if(passedTn) {
+ memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+ yaffs_FreeTnode(dev,passedTn);
+ }
+ }
+
+ return tn;
+}
+
+static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+ yaffs_ExtendedTags * tags, int objectId,
+ int chunkInInode)
+{
+ int j;
+
+ for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+ if (yaffs_CheckChunkBit
+ (dev, theChunk / dev->nChunksPerBlock,
+ theChunk % dev->nChunksPerBlock)) {
+ yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ tags);
+ if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ /* found it; */
+ return theChunk;
+
+ }
+ }
+ theChunk++;
+ }
+ return -1;
+}
+
+
+/* DeleteWorker scans backwards through the tnode tree and deletes all the
+ * chunks and tnodes in the file
+ * Returns 1 if the tree was deleted.
+ * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+ */
+
+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+ int chunkOffset, int *limit)
+{
+ int i;
+ int chunkInInode;
+ int theChunk;
+ yaffs_ExtendedTags tags;
+ int foundChunk;
+ yaffs_Device *dev = in->myDev;
+
+ int allDone = 1;
+
+ if (tn) {
+ if (level > 0) {
+
+ for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ i--) {
+ if (tn->internal[i]) {
+ if (limit && (*limit) < 0) {
+ allDone = 0;
+ } else {
+ allDone =
+ yaffs_DeleteWorker(in,
+ tn->
+ internal
+ [i],
+ level -
+ 1,
+ (chunkOffset
+ <<
+ YAFFS_TNODES_INTERNAL_BITS)
+ + i,
+ limit);
+ }
+ if (allDone) {
+ yaffs_FreeTnode(dev,
+ tn->
+ internal[i]);
+ tn->internal[i] = NULL;
+ }
+ }
+
+ }
+ return (allDone) ? 1 : 0;
+ } else if (level == 0) {
+ int hitLimit = 0;
+
+ for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+ i--) {
+ theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+ if (theChunk) {
+
+ chunkInInode =
+ (chunkOffset <<
+ YAFFS_TNODES_LEVEL0_BITS) + i;
+
+ foundChunk =
+ yaffs_FindChunkInGroup(dev,
+ theChunk,
+ &tags,
+ in->objectId,
+ chunkInInode);
+
+ if (foundChunk > 0) {
+ yaffs_DeleteChunk(dev,
+ foundChunk, 1,
+ __LINE__);
+ in->nDataChunks--;
+ if (limit) {
+ *limit = *limit - 1;
+ if (*limit <= 0) {
+ hitLimit = 1;
+ }
+ }
+
+ }
+
+ yaffs_PutLevel0Tnode(dev,tn,i,0);
+ }
+
+ }
+ return (i < 0) ? 1 : 0;
+
+ }
+
+ }
+
+ return 1;
+
+}
+
+static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
+{
+
+ yaffs_BlockInfo *theBlock;
+
+ T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+
+ theBlock = yaffs_GetBlockInfo(dev, chunk / dev->nChunksPerBlock);
+ if (theBlock) {
+ theBlock->softDeletions++;
+ dev->nFreeChunks++;
+ }
+}
+
+/* SoftDeleteWorker scans backwards through the tnode tree and soft deletes all the chunks in the file.
+ * All soft deleting does is increment the block's softdelete count and pulls the chunk out
+ * of the tnode.
+ * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+ */
+
+static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
+ __u32 level, int chunkOffset)
+{
+ int i;
+ int theChunk;
+ int allDone = 1;
+ yaffs_Device *dev = in->myDev;
+
+ if (tn) {
+ if (level > 0) {
+
+ for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ i--) {
+ if (tn->internal[i]) {
+ allDone =
+ yaffs_SoftDeleteWorker(in,
+ tn->
+ internal[i],
+ level - 1,
+ (chunkOffset
+ <<
+ YAFFS_TNODES_INTERNAL_BITS)
+ + i);
+ if (allDone) {
+ yaffs_FreeTnode(dev,
+ tn->
+ internal[i]);
+ tn->internal[i] = NULL;
+ } else {
+ /* Hoosterman... how could this happen? */
+ }
+ }
+ }
+ return (allDone) ? 1 : 0;
+ } else if (level == 0) {
+
+ for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+ theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+ if (theChunk) {
+ /* Note this does not find the real chunk, only the chunk group.
+ * We make an assumption that a chunk group is not larger than
+ * a block.
+ */
+ yaffs_SoftDeleteChunk(dev, theChunk);
+ yaffs_PutLevel0Tnode(dev,tn,i,0);
+ }
+
+ }
+ return 1;
+
+ }
+
+ }
+
+ return 1;
+
+}
+
+static void yaffs_SoftDeleteFile(yaffs_Object * obj)
+{
+ if (obj->deleted &&
+ obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+ if (obj->nDataChunks <= 0) {
+ /* Empty file with no duplicate object headers, just delete it immediately */
+ yaffs_FreeTnode(obj->myDev,
+ obj->variant.fileVariant.top);
+ obj->variant.fileVariant.top = NULL;
+ T(YAFFS_TRACE_TRACING,
+ (TSTR("yaffs: Deleting empty file %d" TENDSTR),
+ obj->objectId));
+ yaffs_DoGenericObjectDeletion(obj);
+ } else {
+ yaffs_SoftDeleteWorker(obj,
+ obj->variant.fileVariant.top,
+ obj->variant.fileVariant.
+ topLevel, 0);
+ obj->softDeleted = 1;
+ }
+ }
+}
+
+/* Pruning removes any part of the file structure tree that is beyond the
+ * bounds of the file (ie that does not point to chunks).
+ *
+ * A file should only get pruned when its size is reduced.
+ *
+ * Before pruning, the chunks must be pulled from the tree and the
+ * level 0 tnode entries must be zeroed out.
+ * Could also use this for file deletion, but that's probably better handled
+ * by a special case.
+ */
+
+static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+ __u32 level, int del0)
+{
+ int i;
+ int hasData;
+
+ if (tn) {
+ hasData = 0;
+
+ for (i = 0; i < YAFFS_NTNODES_INTERNAL; i++) {
+ if (tn->internal[i] && level > 0) {
+ tn->internal[i] =
+ yaffs_PruneWorker(dev, tn->internal[i],
+ level - 1,
+ (i == 0) ? del0 : 1);
+ }
+
+ if (tn->internal[i]) {
+ hasData++;
+ }
+ }
+
+ if (hasData == 0 && del0) {
+ /* Free and return NULL */
+
+ yaffs_FreeTnode(dev, tn);
+ tn = NULL;
+ }
+
+ }
+
+ return tn;
+
+}
+
+static int yaffs_PruneFileStructure(yaffs_Device * dev,
+ yaffs_FileStructure * fStruct)
+{
+ int i;
+ int hasData;
+ int done = 0;
+ yaffs_Tnode *tn;
+
+ if (fStruct->topLevel > 0) {
+ fStruct->top =
+ yaffs_PruneWorker(dev, fStruct->top, fStruct->topLevel, 0);
+
+ /* Now we have a tree with all the non-zero branches NULL but the height
+ * is the same as it was.
+ * Let's see if we can trim internal tnodes to shorten the tree.
+ * We can do this if only the 0th element in the tnode is in use
+ * (ie all the non-zero are NULL)
+ */
+
+ while (fStruct->topLevel && !done) {
+ tn = fStruct->top;
+
+ hasData = 0;
+ for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+ if (tn->internal[i]) {
+ hasData++;
+ }
+ }
+
+ if (!hasData) {
+ fStruct->top = tn->internal[0];
+ fStruct->topLevel--;
+ yaffs_FreeTnode(dev, tn);
+ } else {
+ done = 1;
+ }
+ }
+ }
+
+ return YAFFS_OK;
+}
+
+/*-------------------- End of File Structure functions.-------------------*/
+
+/* yaffs_CreateFreeObjects creates a bunch more objects and
+ * adds them to the object free list.
+ */
+static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
+{
+ int i;
+ yaffs_Object *newObjects;
+ yaffs_ObjectList *list;
+
+ if (nObjects < 1)
+ return YAFFS_OK;
+
+ /* make these things */
+ newObjects = YMALLOC(nObjects * sizeof(yaffs_Object));
+ list = YMALLOC(sizeof(yaffs_ObjectList));
+
+ if (!newObjects || !list) {
+ if(newObjects)
+ YFREE(newObjects);
+ if(list)
+ YFREE(list);
+ T(YAFFS_TRACE_ALLOCATE,
+ (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ /* Hook them into the free list */
+ for (i = 0; i < nObjects - 1; i++) {
+ newObjects[i].siblings.next =
+ (struct list_head *)(&newObjects[i + 1]);
+ }
+
+ newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+ dev->freeObjects = newObjects;
+ dev->nFreeObjects += nObjects;
+ dev->nObjectsCreated += nObjects;
+
+ /* Now add this bunch of Objects to a list for freeing up. */
+
+ list->objects = newObjects;
+ list->next = dev->allocatedObjectList;
+ dev->allocatedObjectList = list;
+
+ return YAFFS_OK;
+}
+
+
+/* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
+{
+ yaffs_Object *tn = NULL;
+
+ /* If there are none left make more */
+ if (!dev->freeObjects) {
+ yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+ }
+
+ if (dev->freeObjects) {
+ tn = dev->freeObjects;
+ dev->freeObjects =
+ (yaffs_Object *) (dev->freeObjects->siblings.next);
+ dev->nFreeObjects--;
+
+ /* Now sweeten it up... */
+
+ memset(tn, 0, sizeof(yaffs_Object));
+ tn->myDev = dev;
+ tn->chunkId = -1;
+ tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+ INIT_LIST_HEAD(&(tn->hardLinks));
+ INIT_LIST_HEAD(&(tn->hashLink));
+ INIT_LIST_HEAD(&tn->siblings);
+
+ /* Add it to the lost and found directory.
+ * NB Can't put root or lostNFound in lostNFound so
+ * check if lostNFound exists first
+ */
+ if (dev->lostNFoundDir) {
+ yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+ }
+ }
+
+ return tn;
+}
+
+static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
+ __u32 mode)
+{
+
+ yaffs_Object *obj =
+ yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ if (obj) {
+ obj->fake = 1; /* it is fake so it has no NAND presence... */
+ obj->renameAllowed = 0; /* ... and we're not allowed to rename it... */
+ obj->unlinkAllowed = 0; /* ... or unlink it */
+ obj->deleted = 0;
+ obj->unlinked = 0;
+ obj->yst_mode = mode;
+ obj->myDev = dev;
+ obj->chunkId = 0; /* Not a valid chunk. */
+ }
+
+ return obj;
+
+}
+
+static void yaffs_UnhashObject(yaffs_Object * tn)
+{
+ int bucket;
+ yaffs_Device *dev = tn->myDev;
+
+ /* If it is still linked into the bucket list, free from the list */
+ if (!list_empty(&tn->hashLink)) {
+ list_del_init(&tn->hashLink);
+ bucket = yaffs_HashFunction(tn->objectId);
+ dev->objectBucket[bucket].count--;
+ }
+
+}
+
+/* FreeObject frees up a Object and puts it back on the free list */
+static void yaffs_FreeObject(yaffs_Object * tn)
+{
+
+ yaffs_Device *dev = tn->myDev;
+
+/* XXX U-BOOT XXX */
+#if 0
+#ifdef __KERNEL__
+ if (tn->myInode) {
+ /* We're still hooked up to a cached inode.
+ * Don't delete now, but mark for later deletion
+ */
+ tn->deferedFree = 1;
+ return;
+ }
+#endif
+#endif
+ yaffs_UnhashObject(tn);
+
+ /* Link into the free list. */
+ tn->siblings.next = (struct list_head *)(dev->freeObjects);
+ dev->freeObjects = tn;
+ dev->nFreeObjects++;
+}
+
+/* XXX U-BOOT XXX */
+#if 0
+#ifdef __KERNEL__
+
+void yaffs_HandleDeferedFree(yaffs_Object * obj)
+{
+ if (obj->deferedFree) {
+ yaffs_FreeObject(obj);
+ }
+}
+
+#endif
+#endif
+
+static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
+{
+ /* Free the list of allocated Objects */
+
+ yaffs_ObjectList *tmp;
+
+ while (dev->allocatedObjectList) {
+ tmp = dev->allocatedObjectList->next;
+ YFREE(dev->allocatedObjectList->objects);
+ YFREE(dev->allocatedObjectList);
+
+ dev->allocatedObjectList = tmp;
+ }
+
+ dev->freeObjects = NULL;
+ dev->nFreeObjects = 0;
+}
+
+static void yaffs_InitialiseObjects(yaffs_Device * dev)
+{
+ int i;
+
+ dev->allocatedObjectList = NULL;
+ dev->freeObjects = NULL;
+ dev->nFreeObjects = 0;
+
+ for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+ INIT_LIST_HEAD(&dev->objectBucket[i].list);
+ dev->objectBucket[i].count = 0;
+ }
+
+}
+
+static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
+{
+ static int x = 0;
+ int i;
+ int l = 999;
+ int lowest = 999999;
+
+ /* First let's see if we can find one that's empty. */
+
+ for (i = 0; i < 10 && lowest > 0; i++) {
+ x++;
+ x %= YAFFS_NOBJECT_BUCKETS;
+ if (dev->objectBucket[x].count < lowest) {
+ lowest = dev->objectBucket[x].count;
+ l = x;
+ }
+
+ }
+
+ /* If we didn't find an empty list, then try
+ * looking a bit further for a short one
+ */
+
+ for (i = 0; i < 10 && lowest > 3; i++) {
+ x++;
+ x %= YAFFS_NOBJECT_BUCKETS;
+ if (dev->objectBucket[x].count < lowest) {
+ lowest = dev->objectBucket[x].count;
+ l = x;
+ }
+
+ }
+
+ return l;
+}
+
+static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
+{
+ int bucket = yaffs_FindNiceObjectBucket(dev);
+
+ /* Now find an object value that has not already been taken
+ * by scanning the list.
+ */
+
+ int found = 0;
+ struct list_head *i;
+
+ __u32 n = (__u32) bucket;
+
+ /* yaffs_CheckObjectHashSanity(); */
+
+ while (!found) {
+ found = 1;
+ n += YAFFS_NOBJECT_BUCKETS;
+ if (1 || dev->objectBucket[bucket].count > 0) {
+ list_for_each(i, &dev->objectBucket[bucket].list) {
+ /* If there is already one in the list */
+ if (i
+ && list_entry(i, yaffs_Object,
+ hashLink)->objectId == n) {
+ found = 0;
+ }
+ }
+ }
+ }
+
+
+ return n;
+}
+
+static void yaffs_HashObject(yaffs_Object * in)
+{
+ int bucket = yaffs_HashFunction(in->objectId);
+ yaffs_Device *dev = in->myDev;
+
+ list_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ dev->objectBucket[bucket].count++;
+
+}
+
+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
+{
+ int bucket = yaffs_HashFunction(number);
+ struct list_head *i;
+ yaffs_Object *in;
+
+ list_for_each(i, &dev->objectBucket[bucket].list) {
+ /* Look if it is in the list */
+ if (i) {
+ in = list_entry(i, yaffs_Object, hashLink);
+ if (in->objectId == number) {
+/* XXX U-BOOT XXX */
+#if 0
+#ifdef __KERNEL__
+ /* Don't tell the VFS about this one if it is defered free */
+ if (in->deferedFree)
+ return NULL;
+#endif
+#endif
+ return in;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+ yaffs_ObjectType type)
+{
+
+ yaffs_Object *theObject;
+ yaffs_Tnode *tn;
+
+ if (number < 0) {
+ number = yaffs_CreateNewObjectNumber(dev);
+ }
+
+ theObject = yaffs_AllocateEmptyObject(dev);
+ if(!theObject)
+ return NULL;
+
+ if(type == YAFFS_OBJECT_TYPE_FILE){
+ tn = yaffs_GetTnode(dev);
+ if(!tn){
+ yaffs_FreeObject(theObject);
+ return NULL;
+ }
+ }
+
+
+
+ if (theObject) {
+ theObject->fake = 0;
+ theObject->renameAllowed = 1;
+ theObject->unlinkAllowed = 1;
+ theObject->objectId = number;
+ yaffs_HashObject(theObject);
+ theObject->variantType = type;
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_WinFileTimeNow(theObject->win_atime);
+ theObject->win_ctime[0] = theObject->win_mtime[0] =
+ theObject->win_atime[0];
+ theObject->win_ctime[1] = theObject->win_mtime[1] =
+ theObject->win_atime[1];
+
+#else
+
+ theObject->yst_atime = theObject->yst_mtime =
+ theObject->yst_ctime = Y_CURRENT_TIME;
+#endif
+ switch (type) {
+ case YAFFS_OBJECT_TYPE_FILE:
+ theObject->variant.fileVariant.fileSize = 0;
+ theObject->variant.fileVariant.scannedFileSize = 0;
+ theObject->variant.fileVariant.shrinkSize = 0xFFFFFFFF; /* max __u32 */
+ theObject->variant.fileVariant.topLevel = 0;
+ theObject->variant.fileVariant.top = tn;
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+ children);
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ /* No action required */
+ break;
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ /* todo this should not happen */
+ break;
+ }
+ }
+
+ return theObject;
+}
+
+static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
+ int number,
+ yaffs_ObjectType type)
+{
+ yaffs_Object *theObject = NULL;
+
+ if (number > 0) {
+ theObject = yaffs_FindObjectByNumber(dev, number);
+ }
+
+ if (!theObject) {
+ theObject = yaffs_CreateNewObject(dev, number, type);
+ }
+
+ return theObject;
+
+}
+
+
+static YCHAR *yaffs_CloneString(const YCHAR * str)
+{
+ YCHAR *newStr = NULL;
+
+ if (str && *str) {
+ newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+ if(newStr)
+ yaffs_strcpy(newStr, str);
+ }
+
+ return newStr;
+
+}
+
+/*
+ * Mknod (create) a new object.
+ * equivalentObject only has meaning for a hard link;
+ * aliasString only has meaning for a sumlink.
+ * rdev only has meaning for devices (a subset of special objects)
+ */
+
+static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+ yaffs_Object * parent,
+ const YCHAR * name,
+ __u32 mode,
+ __u32 uid,
+ __u32 gid,
+ yaffs_Object * equivalentObject,
+ const YCHAR * aliasString, __u32 rdev)
+{
+ yaffs_Object *in;
+ YCHAR *str;
+
+ yaffs_Device *dev = parent->myDev;
+
+ /* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+ if (yaffs_FindObjectByName(parent, name)) {
+ return NULL;
+ }
+
+ in = yaffs_CreateNewObject(dev, -1, type);
+
+ if(type == YAFFS_OBJECT_TYPE_SYMLINK){
+ str = yaffs_CloneString(aliasString);
+ if(!str){
+ yaffs_FreeObject(in);
+ return NULL;
+ }
+ }
+
+
+
+ if (in) {
+ in->chunkId = -1;
+ in->valid = 1;
+ in->variantType = type;
+
+ in->yst_mode = mode;
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_WinFileTimeNow(in->win_atime);
+ in->win_ctime[0] = in->win_mtime[0] = in->win_atime[0];
+ in->win_ctime[1] = in->win_mtime[1] = in->win_atime[1];
+
+#else
+ in->yst_atime = in->yst_mtime = in->yst_ctime = Y_CURRENT_TIME;
+
+ in->yst_rdev = rdev;
+ in->yst_uid = uid;
+ in->yst_gid = gid;
+#endif
+ in->nDataChunks = 0;
+
+ yaffs_SetObjectName(in, name);
+ in->dirty = 1;
+
+ yaffs_AddObjectToDirectory(parent, in);
+
+ in->myDev = parent->myDev;
+
+ switch (type) {
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ in->variant.symLinkVariant.alias = str;
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ in->variant.hardLinkVariant.equivalentObject =
+ equivalentObject;
+ in->variant.hardLinkVariant.equivalentObjectId =
+ equivalentObject->objectId;
+ list_add(&in->hardLinks, &equivalentObject->hardLinks);
+ break;
+ case YAFFS_OBJECT_TYPE_FILE:
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ /* do nothing */
+ break;
+ }
+
+ if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ /* Could not create the object header, fail the creation */
+ yaffs_DestroyObject(in);
+ in = NULL;
+ }
+
+ }
+
+ return in;
+}
+
+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid)
+{
+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+ uid, gid, NULL, NULL, 0);
+}
+
+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid)
+{
+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ mode, uid, gid, NULL, NULL, 0);
+}
+
+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+{
+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ uid, gid, NULL, NULL, rdev);
+}
+
+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid,
+ const YCHAR * alias)
+{
+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+ uid, gid, NULL, alias, 0);
+}
+
+/* yaffs_Link returns the object id of the equivalent object.*/
+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+ yaffs_Object * equivalentObject)
+{
+ /* Get the real object in case we were fed a hard link as an equivalent object */
+ equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+
+ if (yaffs_MknodObject
+ (YAFFS_OBJECT_TYPE_HARDLINK, parent, name, 0, 0, 0,
+ equivalentObject, NULL, 0)) {
+ return equivalentObject;
+ } else {
+ return NULL;
+ }
+
+}
+
+static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+ const YCHAR * newName, int force, int shadows)
+{
+ int unlinkOp;
+ int deleteOp;
+
+ yaffs_Object *existingTarget;
+
+ if (newDir == NULL) {
+ newDir = obj->parent; /* use the old directory */
+ }
+
+ if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
+ TENDSTR)));
+ YBUG();
+ }
+
+ /* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+ if (obj->myDev->isYaffs2) {
+ unlinkOp = (newDir == obj->myDev->unlinkedDir);
+ } else {
+ unlinkOp = (newDir == obj->myDev->unlinkedDir
+ && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+ }
+
+ deleteOp = (newDir == obj->myDev->deletedDir);
+
+ existingTarget = yaffs_FindObjectByName(newDir, newName);
+
+ /* If the object is a file going into the unlinked directory,
+ * then it is OK to just stuff it in since duplicate names are allowed.
+ * else only proceed if the new name does not exist and if we're putting
+ * it into a directory.
+ */
+ if ((unlinkOp ||
+ deleteOp ||
+ force ||
+ (shadows > 0) ||
+ !existingTarget) &&
+ newDir->variantType == YAFFS_OBJECT_TYPE_DIRECTORY) {
+ yaffs_SetObjectName(obj, newName);
+ obj->dirty = 1;
+
+ yaffs_AddObjectToDirectory(newDir, obj);
+
+ if (unlinkOp)
+ obj->unlinked = 1;
+
+ /* If it is a deletion then we mark it as a shrink for gc purposes. */
+ if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
+ return YAFFS_OK;
+ }
+
+ return YAFFS_FAIL;
+}
+
+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+ yaffs_Object * newDir, const YCHAR * newName)
+{
+ yaffs_Object *obj;
+ yaffs_Object *existingTarget;
+ int force = 0;
+
+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ /* Special case for case insemsitive systems (eg. WinCE).
+ * While look-up is case insensitive, the name isn't.
+ * Therefore we might want to change x.txt to X.txt
+ */
+ if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
+ force = 1;
+ }
+#endif
+
+ obj = yaffs_FindObjectByName(oldDir, oldName);
+ /* Check new name to long. */
+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+ yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+ /* ENAMETOOLONG */
+ return YAFFS_FAIL;
+ else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+ yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+ /* ENAMETOOLONG */
+ return YAFFS_FAIL;
+
+ if (obj && obj->renameAllowed) {
+
+ /* Now do the handling for an existing target, if there is one */
+
+ existingTarget = yaffs_FindObjectByName(newDir, newName);
+ if (existingTarget &&
+ existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+ !list_empty(&existingTarget->variant.directoryVariant.children)) {
+ /* There is a target that is a non-empty directory, so we fail */
+ return YAFFS_FAIL; /* EEXIST or ENOTEMPTY */
+ } else if (existingTarget && existingTarget != obj) {
+ /* Nuke the target first, using shadowing,
+ * but only if it isn't the same object
+ */
+ yaffs_ChangeObjectName(obj, newDir, newName, force,
+ existingTarget->objectId);
+ yaffs_UnlinkObject(existingTarget);
+ }
+
+ return yaffs_ChangeObjectName(obj, newDir, newName, 1, 0);
+ }
+ return YAFFS_FAIL;
+}
+
+/*------------------------- Block Management and Page Allocation ----------------*/
+
+static int yaffs_InitialiseBlocks(yaffs_Device * dev)
+{
+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+
+ dev->blockInfo = NULL;
+ dev->chunkBits = NULL;
+
+ dev->allocationBlock = -1; /* force it to get a new one */
+
+ /* If the first allocation strategy fails, thry the alternate one */
+ dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+ if(!dev->blockInfo){
+ dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ dev->blockInfoAlt = 1;
+ }
+ else
+ dev->blockInfoAlt = 0;
+
+ if(dev->blockInfo){
+
+ /* Set up dynamic blockinfo stuff. */
+ dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+ if(!dev->chunkBits){
+ dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ dev->chunkBitsAlt = 1;
+ }
+ else
+ dev->chunkBitsAlt = 0;
+ }
+
+ if (dev->blockInfo && dev->chunkBits) {
+ memset(dev->blockInfo, 0, nBlocks * sizeof(yaffs_BlockInfo));
+ memset(dev->chunkBits, 0, dev->chunkBitmapStride * nBlocks);
+ return YAFFS_OK;
+ }
+
+ return YAFFS_FAIL;
+
+}
+
+static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
+{
+ if(dev->blockInfoAlt && dev->blockInfo)
+ YFREE_ALT(dev->blockInfo);
+ else if(dev->blockInfo)
+ YFREE(dev->blockInfo);
+
+ dev->blockInfoAlt = 0;
+
+ dev->blockInfo = NULL;
+
+ if(dev->chunkBitsAlt && dev->chunkBits)
+ YFREE_ALT(dev->chunkBits);
+ else if(dev->chunkBits)
+ YFREE(dev->chunkBits);
+ dev->chunkBitsAlt = 0;
+ dev->chunkBits = NULL;
+}
+
+static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+ yaffs_BlockInfo * bi)
+{
+ int i;
+ __u32 seq;
+ yaffs_BlockInfo *b;
+
+ if (!dev->isYaffs2)
+ return 1; /* disqualification only applies to yaffs2. */
+
+ if (!bi->hasShrinkHeader)
+ return 1; /* can gc */
+
+ /* Find the oldest dirty sequence number if we don't know it and save it
+ * so we don't have to keep recomputing it.
+ */
+ if (!dev->oldestDirtySequence) {
+ seq = dev->sequenceNumber;
+
+ for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+ i++) {
+ b = yaffs_GetBlockInfo(dev, i);
+ if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ (b->pagesInUse - b->softDeletions) <
+ dev->nChunksPerBlock && b->sequenceNumber < seq) {
+ seq = b->sequenceNumber;
+ }
+ }
+ dev->oldestDirtySequence = seq;
+ }
+
+ /* Can't do gc of this block if there are any blocks older than this one that have
+ * discarded pages.
+ */
+ return (bi->sequenceNumber <= dev->oldestDirtySequence);
+
+}
+
+/* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+ * for garbage collection.
+ */
+
+static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+ int aggressive)
+{
+
+ int b = dev->currentDirtyChecker;
+
+ int i;
+ int iterations;
+ int dirtiest = -1;
+ int pagesInUse = 0;
+ int prioritised=0;
+ yaffs_BlockInfo *bi;
+ int pendingPrioritisedExist = 0;
+
+ /* First let's see if we need to grab a prioritised block */
+ if(dev->hasPendingPrioritisedGCs){
+ for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
+
+ bi = yaffs_GetBlockInfo(dev, i);
+ //yaffs_VerifyBlock(dev,bi,i);
+
+ if(bi->gcPrioritise) {
+ pendingPrioritisedExist = 1;
+ if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+ yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
+ pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ dirtiest = i;
+ prioritised = 1;
+ aggressive = 1; /* Fool the non-aggressive skip logiv below */
+ }
+ }
+ }
+
+ if(!pendingPrioritisedExist) /* None found, so we can clear this */
+ dev->hasPendingPrioritisedGCs = 0;
+ }
+
+ /* If we're doing aggressive GC then we are happy to take a less-dirty block, and
+ * search harder.
+ * else (we're doing a leasurely gc), then we only bother to do this if the
+ * block has only a few pages in use.
+ */
+
+ dev->nonAggressiveSkip--;
+
+ if (!aggressive && (dev->nonAggressiveSkip > 0)) {
+ return -1;
+ }
+
+ if(!prioritised)
+ pagesInUse =
+ (aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+
+ if (aggressive) {
+ iterations =
+ dev->internalEndBlock - dev->internalStartBlock + 1;
+ } else {
+ iterations =
+ dev->internalEndBlock - dev->internalStartBlock + 1;
+ iterations = iterations / 16;
+ if (iterations > 200) {
+ iterations = 200;
+ }
+ }
+
+ for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ b++;
+ if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ b = dev->internalStartBlock;
+ }
+
+ if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("**>> Block %d is not valid" TENDSTR), b));
+ YBUG();
+ }
+
+ bi = yaffs_GetBlockInfo(dev, b);
+
+#if 0
+ if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ dirtiest = b;
+ pagesInUse = 0;
+ }
+ else
+#endif
+
+ if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+ (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+ yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ dirtiest = b;
+ pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ }
+ }
+
+ dev->currentDirtyChecker = b;
+
+ if (dirtiest > 0) {
+ T(YAFFS_TRACE_GC,
+ (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+ dev->nChunksPerBlock - pagesInUse,prioritised));
+ }
+
+ dev->oldestDirtySequence = 0;
+
+ if (dirtiest > 0) {
+ dev->nonAggressiveSkip = 4;
+ }
+
+ return dirtiest;
+}
+
+static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
+{
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+
+ int erasedOk = 0;
+
+ /* If the block is still healthy erase it and mark as clean.
+ * If the block has had a data failure, then retire it.
+ */
+
+ T(YAFFS_TRACE_GC | YAFFS_TRACE_ERASE,
+ (TSTR("yaffs_BlockBecameDirty block %d state %d %s"TENDSTR),
+ blockNo, bi->blockState, (bi->needsRetiring) ? "needs retiring" : ""));
+
+ bi->blockState = YAFFS_BLOCK_STATE_DIRTY;
+
+ if (!bi->needsRetiring) {
+ yaffs_InvalidateCheckpoint(dev);
+ erasedOk = yaffs_EraseBlockInNAND(dev, blockNo);
+ if (!erasedOk) {
+ dev->nErasureFailures++;
+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("**>> Erasure failed %d" TENDSTR), blockNo));
+ }
+ }
+
+ if (erasedOk &&
+ ((yaffs_traceMask & YAFFS_TRACE_ERASE) || !yaffs_SkipVerification(dev))) {
+ int i;
+ for (i = 0; i < dev->nChunksPerBlock; i++) {
+ if (!yaffs_CheckChunkErased
+ (dev, blockNo * dev->nChunksPerBlock + i)) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ (">>Block %d erasure supposedly OK, but chunk %d not erased"
+ TENDSTR), blockNo, i));
+ }
+ }
+ }
+
+ if (erasedOk) {
+ /* Clean it up... */
+ bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ dev->nErasedBlocks++;
+ bi->pagesInUse = 0;
+ bi->softDeletions = 0;
+ bi->hasShrinkHeader = 0;
+ bi->skipErasedCheck = 1; /* This is clean, so no need to check */
+ bi->gcPrioritise = 0;
+ yaffs_ClearChunkBits(dev, blockNo);
+
+ T(YAFFS_TRACE_ERASE,
+ (TSTR("Erased block %d" TENDSTR), blockNo));
+ } else {
+ dev->nFreeChunks -= dev->nChunksPerBlock; /* We lost a block of free space */
+
+ yaffs_RetireBlock(dev, blockNo);
+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("**>> Block %d retired" TENDSTR), blockNo));
+ }
+}
+
+static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
+{
+ int i;
+
+ yaffs_BlockInfo *bi;
+
+ if (dev->nErasedBlocks < 1) {
+ /* Hoosterman we've got a problem.
+ * Can't get space to gc
+ */
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
+
+ return -1;
+ }
+
+ /* Find an empty block. */
+
+ for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+ dev->allocationBlockFinder++;
+ if (dev->allocationBlockFinder < dev->internalStartBlock
+ || dev->allocationBlockFinder > dev->internalEndBlock) {
+ dev->allocationBlockFinder = dev->internalStartBlock;
+ }
+
+ bi = yaffs_GetBlockInfo(dev, dev->allocationBlockFinder);
+
+ if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ bi->blockState = YAFFS_BLOCK_STATE_ALLOCATING;
+ dev->sequenceNumber++;
+ bi->sequenceNumber = dev->sequenceNumber;
+ dev->nErasedBlocks--;
+ T(YAFFS_TRACE_ALLOCATE,
+ (TSTR("Allocated block %d, seq %d, %d left" TENDSTR),
+ dev->allocationBlockFinder, dev->sequenceNumber,
+ dev->nErasedBlocks));
+ return dev->allocationBlockFinder;
+ }
+ }
+
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("yaffs tragedy: no more eraased blocks, but there should have been %d"
+ TENDSTR), dev->nErasedBlocks));
+
+ return -1;
+}
+
+
+// Check if there's space to allocate...
+// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
+{
+ int reservedChunks;
+ int reservedBlocks = dev->nReservedBlocks;
+ int checkpointBlocks;
+
+ checkpointBlocks = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+ if(checkpointBlocks < 0)
+ checkpointBlocks = 0;
+
+ reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+
+ return (dev->nFreeChunks > reservedChunks);
+}
+
+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
+{
+ int retVal;
+ yaffs_BlockInfo *bi;
+
+ if (dev->allocationBlock < 0) {
+ /* Get next block to allocate off */
+ dev->allocationBlock = yaffs_FindBlockForAllocation(dev);
+ dev->allocationPage = 0;
+ }
+
+ if (!useReserve && !yaffs_CheckSpaceForAllocation(dev)) {
+ /* Not enough space to allocate unless we're allowed to use the reserve. */
+ return -1;
+ }
+
+ if (dev->nErasedBlocks < dev->nReservedBlocks
+ && dev->allocationPage == 0) {
+ T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ }
+
+ /* Next page please.... */
+ if (dev->allocationBlock >= 0) {
+ bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+
+ retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+ dev->allocationPage;
+ bi->pagesInUse++;
+ yaffs_SetChunkBit(dev, dev->allocationBlock,
+ dev->allocationPage);
+
+ dev->allocationPage++;
+
+ dev->nFreeChunks--;
+
+ /* If the block is full set the state to full */
+ if (dev->allocationPage >= dev->nChunksPerBlock) {
+ bi->blockState = YAFFS_BLOCK_STATE_FULL;
+ dev->allocationBlock = -1;
+ }
+
+ if(blockUsedPtr)
+ *blockUsedPtr = bi;
+
+ return retVal;
+ }
+
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+
+ return -1;
+}
+
+static int yaffs_GetErasedChunks(yaffs_Device * dev)
+{
+ int n;
+
+ n = dev->nErasedBlocks * dev->nChunksPerBlock;
+
+ if (dev->allocationBlock > 0) {
+ n += (dev->nChunksPerBlock - dev->allocationPage);
+ }
+
+ return n;
+
+}
+
+static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
+{
+ int oldChunk;
+ int newChunk;
+ int chunkInBlock;
+ int markNAND;
+ int retVal = YAFFS_OK;
+ int cleanups = 0;
+ int i;
+ int isCheckpointBlock;
+ int matchingChunk;
+
+ int chunksBefore = yaffs_GetErasedChunks(dev);
+ int chunksAfter;
+
+ yaffs_ExtendedTags tags;
+
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, block);
+
+ yaffs_Object *object;
+
+ isCheckpointBlock = (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT);
+
+ bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+
+ T(YAFFS_TRACE_TRACING,
+ (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+ bi->pagesInUse, bi->hasShrinkHeader));
+
+ /*yaffs_VerifyFreeChunks(dev); */
+
+ bi->hasShrinkHeader = 0; /* clear the flag so that the block can erase */
+
+ /* Take off the number of soft deleted entries because
+ * they're going to get really deleted during GC.
+ */
+ dev->nFreeChunks -= bi->softDeletions;
+
+ dev->isDoingGC = 1;
+
+ if (isCheckpointBlock ||
+ !yaffs_StillSomeChunkBits(dev, block)) {
+ T(YAFFS_TRACE_TRACING,
+ (TSTR
+ ("Collecting block %d that has no chunks in use" TENDSTR),
+ block));
+ yaffs_BlockBecameDirty(dev, block);
+ } else {
+
+ __u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+ yaffs_VerifyBlock(dev,bi,block);
+
+ for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+ chunkInBlock < dev->nChunksPerBlock
+ && yaffs_StillSomeChunkBits(dev, block);
+ chunkInBlock++, oldChunk++) {
+ if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
+
+ /* This page is in use and might need to be copied off */
+
+ markNAND = 1;
+
+ yaffs_InitialiseTags(&tags);
+
+ yaffs_ReadChunkWithTagsFromNAND(dev, oldChunk,
+ buffer, &tags);
+
+ object =
+ yaffs_FindObjectByNumber(dev,
+ tags.objectId);
+
+ T(YAFFS_TRACE_GC_DETAIL,
+ (TSTR
+ ("Collecting page %d, %d %d %d " TENDSTR),
+ chunkInBlock, tags.objectId, tags.chunkId,
+ tags.byteCount));
+
+ if(object && !yaffs_SkipVerification(dev)){
+ if(tags.chunkId == 0)
+ matchingChunk = object->chunkId;
+ else if(object->softDeleted)
+ matchingChunk = oldChunk; /* Defeat the test */
+ else
+ matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
+
+ if(oldChunk != matchingChunk)
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+ oldChunk,matchingChunk,tags.objectId, tags.chunkId));
+
+ }
+
+ if (!object) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("page %d in gc has no object: %d %d %d "
+ TENDSTR), oldChunk,
+ tags.objectId, tags.chunkId, tags.byteCount));
+ }
+
+ if (object && object->deleted
+ && tags.chunkId != 0) {
+ /* Data chunk in a deleted file, throw it away
+ * It's a soft deleted data chunk,
+ * No need to copy this, just forget about it and
+ * fix up the object.
+ */
+
+ object->nDataChunks--;
+
+ if (object->nDataChunks <= 0) {
+ /* remeber to clean up the object */
+ dev->gcCleanupList[cleanups] =
+ tags.objectId;
+ cleanups++;
+ }
+ markNAND = 0;
+ } else if (0
+ /* Todo object && object->deleted && object->nDataChunks == 0 */
+ ) {
+ /* Deleted object header with no data chunks.
+ * Can be discarded and the file deleted.
+ */
+ object->chunkId = 0;
+ yaffs_FreeTnode(object->myDev,
+ object->variant.
+ fileVariant.top);
+ object->variant.fileVariant.top = NULL;
+ yaffs_DoGenericObjectDeletion(object);
+
+ } else if (object) {
+ /* It's either a data chunk in a live file or
+ * an ObjectHeader, so we're interested in it.
+ * NB Need to keep the ObjectHeaders of deleted files
+ * until the whole file has been deleted off
+ */
+ tags.serialNumber++;
+
+ dev->nGCCopies++;
+
+ if (tags.chunkId == 0) {
+ /* It is an object Id,
+ * We need to nuke the shrinkheader flags first
+ * We no longer want the shrinkHeader flag since its work is done
+ * and if it is left in place it will mess up scanning.
+ * Also, clear out any shadowing stuff
+ */
+
+ yaffs_ObjectHeader *oh;
+ oh = (yaffs_ObjectHeader *)buffer;
+ oh->isShrink = 0;
+ oh->shadowsObject = -1;
+ tags.extraShadows = 0;
+ tags.extraIsShrinkHeader = 0;
+
+ yaffs_VerifyObjectHeader(object,oh,&tags,1);
+ }
+
+ newChunk =
+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &tags, 1);
+
+ if (newChunk < 0) {
+ retVal = YAFFS_FAIL;
+ } else {
+
+ /* Ok, now fix up the Tnodes etc. */
+
+ if (tags.chunkId == 0) {
+ /* It's a header */
+ object->chunkId = newChunk;
+ object->serial = tags.serialNumber;
+ } else {
+ /* It's a data chunk */
+ yaffs_PutChunkIntoFile
+ (object,
+ tags.chunkId,
+ newChunk, 0);
+ }
+ }
+ }
+
+ yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+
+ }
+ }
+
+ yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+
+
+ /* Do any required cleanups */
+ for (i = 0; i < cleanups; i++) {
+ /* Time to delete the file too */
+ object =
+ yaffs_FindObjectByNumber(dev,
+ dev->gcCleanupList[i]);
+ if (object) {
+ yaffs_FreeTnode(dev,
+ object->variant.fileVariant.
+ top);
+ object->variant.fileVariant.top = NULL;
+ T(YAFFS_TRACE_GC,
+ (TSTR
+ ("yaffs: About to finally delete object %d"
+ TENDSTR), object->objectId));
+ yaffs_DoGenericObjectDeletion(object);
+ object->myDev->nDeletedFiles--;
+ }
+
+ }
+
+ }
+
+ yaffs_VerifyCollectedBlock(dev,bi,block);
+
+ if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
+ T(YAFFS_TRACE_GC,
+ (TSTR
+ ("gc did not increase free chunks before %d after %d"
+ TENDSTR), chunksBefore, chunksAfter));
+ }
+
+ dev->isDoingGC = 0;
+
+ return YAFFS_OK;
+}
+
+/* New garbage collector
+ * If we're very low on erased blocks then we do aggressive garbage collection
+ * otherwise we do "leasurely" garbage collection.
+ * Aggressive gc looks further (whole array) and will accept less dirty blocks.
+ * Passive gc only inspects smaller areas and will only accept more dirty blocks.
+ *
+ * The idea is to help clear out space in a more spread-out manner.
+ * Dunno if it really does anything useful.
+ */
+static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
+{
+ int block;
+ int aggressive;
+ int gcOk = YAFFS_OK;
+ int maxTries = 0;
+
+ int checkpointBlockAdjust;
+
+ if (dev->isDoingGC) {
+ /* Bail out so we don't get recursive gc */
+ return YAFFS_OK;
+ }
+
+ /* This loop should pass the first time.
+ * We'll only see looping here if the erase of the collected block fails.
+ */
+
+ do {
+ maxTries++;
+
+ checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+ if(checkpointBlockAdjust < 0)
+ checkpointBlockAdjust = 0;
+
+ if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+ /* We need a block soon...*/
+ aggressive = 1;
+ } else {
+ /* We're in no hurry */
+ aggressive = 0;
+ }
+
+ block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
+
+ if (block > 0) {
+ dev->garbageCollections++;
+ if (!aggressive) {
+ dev->passiveGarbageCollections++;
+ }
+
+ T(YAFFS_TRACE_GC,
+ (TSTR
+ ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ dev->nErasedBlocks, aggressive));
+
+ gcOk = yaffs_GarbageCollectBlock(dev, block);
+ }
+
+ if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+ T(YAFFS_TRACE_GC,
+ (TSTR
+ ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ TENDSTR), dev->nErasedBlocks, maxTries, block));
+ }
+ } while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+ && (maxTries < 2));
+
+ return aggressive ? gcOk : YAFFS_OK;
+}
+
+/*------------------------- TAGS --------------------------------*/
+
+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+ int chunkInObject)
+{
+ return (tags->chunkId == chunkInObject &&
+ tags->objectId == objectId && !tags->chunkDeleted) ? 1 : 0;
+
+}
+
+
+/*-------------------- Data file manipulation -----------------*/
+
+static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+ yaffs_ExtendedTags * tags)
+{
+ /*Get the Tnode, then get the level 0 offset chunk offset */
+ yaffs_Tnode *tn;
+ int theChunk = -1;
+ yaffs_ExtendedTags localTags;
+ int retVal = -1;
+
+ yaffs_Device *dev = in->myDev;
+
+ if (!tags) {
+ /* Passed a NULL, so use our own tags space */
+ tags = &localTags;
+ }
+
+ tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+
+ if (tn) {
+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+ retVal =
+ yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ chunkInInode);
+ }
+ return retVal;
+}
+
+static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+ yaffs_ExtendedTags * tags)
+{
+ /* Get the Tnode, then get the level 0 offset chunk offset */
+ yaffs_Tnode *tn;
+ int theChunk = -1;
+ yaffs_ExtendedTags localTags;
+
+ yaffs_Device *dev = in->myDev;
+ int retVal = -1;
+
+ if (!tags) {
+ /* Passed a NULL, so use our own tags space */
+ tags = &localTags;
+ }
+
+ tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+
+ if (tn) {
+
+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+ retVal =
+ yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ chunkInInode);
+
+ /* Delete the entry in the filestructure (if found) */
+ if (retVal != -1) {
+ yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+ }
+ } else {
+ /*T(("No level 0 found for %d\n", chunkInInode)); */
+ }
+
+ if (retVal == -1) {
+ /* T(("Could not find %d to delete\n",chunkInInode)); */
+ }
+ return retVal;
+}
+
+#ifdef YAFFS_PARANOID
+
+static int yaffs_CheckFileSanity(yaffs_Object * in)
+{
+ int chunk;
+ int nChunks;
+ int fSize;
+ int failed = 0;
+ int objId;
+ yaffs_Tnode *tn;
+ yaffs_Tags localTags;
+ yaffs_Tags *tags = &localTags;
+ int theChunk;
+ int chunkDeleted;
+
+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+ /* T(("Object not a file\n")); */
+ return YAFFS_FAIL;
+ }
+
+ objId = in->objectId;
+ fSize = in->variant.fileVariant.fileSize;
+ nChunks =
+ (fSize + in->myDev->nDataBytesPerChunk - 1) / in->myDev->nDataBytesPerChunk;
+
+ for (chunk = 1; chunk <= nChunks; chunk++) {
+ tn = yaffs_FindLevel0Tnode(in->myDev, &in->variant.fileVariant,
+ chunk);
+
+ if (tn) {
+
+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
+
+ if (yaffs_CheckChunkBits
+ (dev, theChunk / dev->nChunksPerBlock,
+ theChunk % dev->nChunksPerBlock)) {
+
+ yaffs_ReadChunkTagsFromNAND(in->myDev, theChunk,
+ tags,
+ &chunkDeleted);
+ if (yaffs_TagsMatch
+ (tags, in->objectId, chunk, chunkDeleted)) {
+ /* found it; */
+
+ }
+ } else {
+
+ failed = 1;
+ }
+
+ } else {
+ /* T(("No level 0 found for %d\n", chunk)); */
+ }
+ }
+
+ return failed ? YAFFS_FAIL : YAFFS_OK;
+}
+
+#endif
+
+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+ int chunkInNAND, int inScan)
+{
+ /* NB inScan is zero unless scanning.
+ * For forward scanning, inScan is > 0;
+ * for backward scanning inScan is < 0
+ */
+
+ yaffs_Tnode *tn;
+ yaffs_Device *dev = in->myDev;
+ int existingChunk;
+ yaffs_ExtendedTags existingTags;
+ yaffs_ExtendedTags newTags;
+ unsigned existingSerial, newSerial;
+
+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+ /* Just ignore an attempt at putting a chunk into a non-file during scanning
+ * If it is not during Scanning then something went wrong!
+ */
+ if (!inScan) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy:attempt to put data chunk into a non-file"
+ TENDSTR)));
+ YBUG();
+ }
+
+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ return YAFFS_OK;
+ }
+
+ tn = yaffs_AddOrFindLevel0Tnode(dev,
+ &in->variant.fileVariant,
+ chunkInInode,
+ NULL);
+ if (!tn) {
+ return YAFFS_FAIL;
+ }
+
+ existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+ if (inScan != 0) {
+ /* If we're scanning then we need to test for duplicates
+ * NB This does not need to be efficient since it should only ever
+ * happen when the power fails during a write, then only one
+ * chunk should ever be affected.
+ *
+ * Correction for YAFFS2: This could happen quite a lot and we need to think about efficiency! TODO
+ * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ */
+
+ if (existingChunk != 0) {
+ /* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ * thus we have to do a FindChunkInFile to get the real chunk id.
+ *
+ * We have a duplicate now we need to decide which one to use:
+ *
+ * Backwards scanning YAFFS2: The old one is what we use, dump the new one.
+ * Forward scanning YAFFS2: The new one is what we use, dump the old one.
+ * YAFFS1: Get both sets of tags and compare serial numbers.
+ */
+
+ if (inScan > 0) {
+ /* Only do this for forward scanning */
+ yaffs_ReadChunkWithTagsFromNAND(dev,
+ chunkInNAND,
+ NULL, &newTags);
+
+ /* Do a proper find */
+ existingChunk =
+ yaffs_FindChunkInFile(in, chunkInInode,
+ &existingTags);
+ }
+
+ if (existingChunk <= 0) {
+ /*Hoosterman - how did this happen? */
+
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy: existing chunk < 0 in scan"
+ TENDSTR)));
+
+ }
+
+ /* NB The deleted flags should be false, otherwise the chunks will
+ * not be loaded during a scan
+ */
+
+ newSerial = newTags.serialNumber;
+ existingSerial = existingTags.serialNumber;
+
+ if ((inScan > 0) &&
+ (in->myDev->isYaffs2 ||
+ existingChunk <= 0 ||
+ ((existingSerial + 1) & 3) == newSerial)) {
+ /* Forward scanning.
+ * Use new
+ * Delete the old one and drop through to update the tnode
+ */
+ yaffs_DeleteChunk(dev, existingChunk, 1,
+ __LINE__);
+ } else {
+ /* Backward scanning or we want to use the existing one
+ * Use existing.
+ * Delete the new one and return early so that the tnode isn't changed
+ */
+ yaffs_DeleteChunk(dev, chunkInNAND, 1,
+ __LINE__);
+ return YAFFS_OK;
+ }
+ }
+
+ }
+
+ if (existingChunk == 0) {
+ in->nDataChunks++;
+ }
+
+ yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
+
+ return YAFFS_OK;
+}
+
+static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+ __u8 * buffer)
+{
+ int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+
+ if (chunkInNAND >= 0) {
+ return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+ buffer,NULL);
+ } else {
+ T(YAFFS_TRACE_NANDACCESS,
+ (TSTR("Chunk %d not found zero instead" TENDSTR),
+ chunkInNAND));
+ /* get sane (zero) data if you read a hole */
+ memset(buffer, 0, in->myDev->nDataBytesPerChunk);
+ return 0;
+ }
+
+}
+
+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
+{
+ int block;
+ int page;
+ yaffs_ExtendedTags tags;
+ yaffs_BlockInfo *bi;
+
+ if (chunkId <= 0)
+ return;
+
+
+ dev->nDeletions++;
+ block = chunkId / dev->nChunksPerBlock;
+ page = chunkId % dev->nChunksPerBlock;
+
+
+ if(!yaffs_CheckChunkBit(dev,block,page))
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Deleting invalid chunk %d"TENDSTR),
+ chunkId));
+
+ bi = yaffs_GetBlockInfo(dev, block);
+
+ T(YAFFS_TRACE_DELETION,
+ (TSTR("line %d delete of chunk %d" TENDSTR), lyn, chunkId));
+
+ if (markNAND &&
+ bi->blockState != YAFFS_BLOCK_STATE_COLLECTING && !dev->isYaffs2) {
+
+ yaffs_InitialiseTags(&tags);
+
+ tags.chunkDeleted = 1;
+
+ yaffs_WriteChunkWithTagsToNAND(dev, chunkId, NULL, &tags);
+ yaffs_HandleUpdateChunk(dev, chunkId, &tags);
+ } else {
+ dev->nUnmarkedDeletions++;
+ }
+
+ /* Pull out of the management area.
+ * If the whole block became dirty, this will kick off an erasure.
+ */
+ if (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING ||
+ bi->blockState == YAFFS_BLOCK_STATE_FULL ||
+ bi->blockState == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) {
+ dev->nFreeChunks++;
+
+ yaffs_ClearChunkBit(dev, block, page);
+
+ bi->pagesInUse--;
+
+ if (bi->pagesInUse == 0 &&
+ !bi->hasShrinkHeader &&
+ bi->blockState != YAFFS_BLOCK_STATE_ALLOCATING &&
+ bi->blockState != YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ yaffs_BlockBecameDirty(dev, block);
+ }
+
+ } else {
+ /* T(("Bad news deleting chunk %d\n",chunkId)); */
+ }
+
+}
+
+static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+ const __u8 * buffer, int nBytes,
+ int useReserve)
+{
+ /* Find old chunk Need to do this to get serial number
+ * Write new one and patch into tree.
+ * Invalidate old tags.
+ */
+
+ int prevChunkId;
+ yaffs_ExtendedTags prevTags;
+
+ int newChunkId;
+ yaffs_ExtendedTags newTags;
+
+ yaffs_Device *dev = in->myDev;
+
+ yaffs_CheckGarbageCollection(dev);
+
+ /* Get the previous chunk at this location in the file if it exists */
+ prevChunkId = yaffs_FindChunkInFile(in, chunkInInode, &prevTags);
+
+ /* Set up new tags */
+ yaffs_InitialiseTags(&newTags);
+
+ newTags.chunkId = chunkInInode;
+ newTags.objectId = in->objectId;
+ newTags.serialNumber =
+ (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ newTags.byteCount = nBytes;
+
+ newChunkId =
+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ useReserve);
+
+ if (newChunkId >= 0) {
+ yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+
+ if (prevChunkId >= 0) {
+ yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+
+ }
+
+ yaffs_CheckFileSanity(in);
+ }
+ return newChunkId;
+
+}
+
+/* UpdateObjectHeader updates the header on NAND for an object.
+ * If name is not NULL, then that new name is used.
+ */
+int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
+ int isShrink, int shadows)
+{
+
+ yaffs_BlockInfo *bi;
+
+ yaffs_Device *dev = in->myDev;
+
+ int prevChunkId;
+ int retVal = 0;
+ int result = 0;
+
+ int newChunkId;
+ yaffs_ExtendedTags newTags;
+ yaffs_ExtendedTags oldTags;
+
+ __u8 *buffer = NULL;
+ YCHAR oldName[YAFFS_MAX_NAME_LENGTH + 1];
+
+ yaffs_ObjectHeader *oh = NULL;
+
+ yaffs_strcpy(oldName,"silly old name");
+
+ if (!in->fake || force) {
+
+ yaffs_CheckGarbageCollection(dev);
+ yaffs_CheckObjectDetailsLoaded(in);
+
+ buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ oh = (yaffs_ObjectHeader *) buffer;
+
+ prevChunkId = in->chunkId;
+
+ if (prevChunkId >= 0) {
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ buffer, &oldTags);
+
+ yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
+
+ memcpy(oldName, oh->name, sizeof(oh->name));
+ }
+
+ memset(buffer, 0xFF, dev->nDataBytesPerChunk);
+
+ oh->type = in->variantType;
+ oh->yst_mode = in->yst_mode;
+ oh->shadowsObject = shadows;
+
+#ifdef CONFIG_YAFFS_WINCE
+ oh->win_atime[0] = in->win_atime[0];
+ oh->win_ctime[0] = in->win_ctime[0];
+ oh->win_mtime[0] = in->win_mtime[0];
+ oh->win_atime[1] = in->win_atime[1];
+ oh->win_ctime[1] = in->win_ctime[1];
+ oh->win_mtime[1] = in->win_mtime[1];
+#else
+ oh->yst_uid = in->yst_uid;
+ oh->yst_gid = in->yst_gid;
+ oh->yst_atime = in->yst_atime;
+ oh->yst_mtime = in->yst_mtime;
+ oh->yst_ctime = in->yst_ctime;
+ oh->yst_rdev = in->yst_rdev;
+#endif
+ if (in->parent) {
+ oh->parentObjectId = in->parent->objectId;
+ } else {
+ oh->parentObjectId = 0;
+ }
+
+ if (name && *name) {
+ memset(oh->name, 0, sizeof(oh->name));
+ yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+ } else if (prevChunkId>=0) {
+ memcpy(oh->name, oldName, sizeof(oh->name));
+ } else {
+ memset(oh->name, 0, sizeof(oh->name));
+ }
+
+ oh->isShrink = isShrink;
+
+ switch (in->variantType) {
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ /* Should not happen */
+ break;
+ case YAFFS_OBJECT_TYPE_FILE:
+ oh->fileSize =
+ (oh->parentObjectId == YAFFS_OBJECTID_DELETED
+ || oh->parentObjectId ==
+ YAFFS_OBJECTID_UNLINKED) ? 0 : in->variant.
+ fileVariant.fileSize;
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ oh->equivalentObjectId =
+ in->variant.hardLinkVariant.equivalentObjectId;
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ yaffs_strncpy(oh->alias,
+ in->variant.symLinkVariant.alias,
+ YAFFS_MAX_ALIAS_LENGTH);
+ oh->alias[YAFFS_MAX_ALIAS_LENGTH] = 0;
+ break;
+ }
+
+ /* Tags */
+ yaffs_InitialiseTags(&newTags);
+ in->serial++;
+ newTags.chunkId = 0;
+ newTags.objectId = in->objectId;
+ newTags.serialNumber = in->serial;
+
+ /* Add extra info for file header */
+
+ newTags.extraHeaderInfoAvailable = 1;
+ newTags.extraParentObjectId = oh->parentObjectId;
+ newTags.extraFileLength = oh->fileSize;
+ newTags.extraIsShrinkHeader = oh->isShrink;
+ newTags.extraEquivalentObjectId = oh->equivalentObjectId;
+ newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ newTags.extraObjectType = in->variantType;
+
+ yaffs_VerifyObjectHeader(in,oh,&newTags,1);
+
+ /* Create new chunk in NAND */
+ newChunkId =
+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ (prevChunkId >= 0) ? 1 : 0);
+
+ if (newChunkId >= 0) {
+
+ in->chunkId = newChunkId;
+
+ if (prevChunkId >= 0) {
+ yaffs_DeleteChunk(dev, prevChunkId, 1,
+ __LINE__);
+ }
+
+ if(!yaffs_ObjectHasCachedWriteData(in))
+ in->dirty = 0;
+
+ /* If this was a shrink, then mark the block that the chunk lives on */
+ if (isShrink) {
+ bi = yaffs_GetBlockInfo(in->myDev,
+ newChunkId /in->myDev-> nChunksPerBlock);
+ bi->hasShrinkHeader = 1;
+ }
+
+ }
+
+ retVal = newChunkId;
+
+ }
+
+ if (buffer)
+ yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+
+ return retVal;
+}
+
+/*------------------------ Short Operations Cache ----------------------------------------
+ * In many situations where there is no high level buffering (eg WinCE) a lot of
+ * reads might be short sequential reads, and a lot of writes may be short
+ * sequential writes. eg. scanning/writing a jpeg file.
+ * In these cases, a short read/write cache can provide a huge perfomance benefit
+ * with dumb-as-a-rock code.
+ * In Linux, the page cache provides read buffering aand the short op cache provides write
+ * buffering.
+ *
+ * There are a limited number (~10) of cache chunks per device so that we don't
+ * need a very intelligent search.
+ */
+
+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj)
+{
+ yaffs_Device *dev = obj->myDev;
+ int i;
+ yaffs_ChunkCache *cache;
+ int nCaches = obj->myDev->nShortOpCaches;
+
+ for(i = 0; i < nCaches; i++){
+ cache = &dev->srCache[i];
+ if (cache->object == obj &&
+ cache->dirty)
+ return 1;
+ }
+
+ return 0;
+}
+
+
+static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
+{
+ yaffs_Device *dev = obj->myDev;
+ int lowest = -99; /* Stop compiler whining. */
+ int i;
+ yaffs_ChunkCache *cache;
+ int chunkWritten = 0;
+ int nCaches = obj->myDev->nShortOpCaches;
+
+ if (nCaches > 0) {
+ do {
+ cache = NULL;
+
+ /* Find the dirty cache for this object with the lowest chunk id. */
+ for (i = 0; i < nCaches; i++) {
+ if (dev->srCache[i].object == obj &&
+ dev->srCache[i].dirty) {
+ if (!cache
+ || dev->srCache[i].chunkId <
+ lowest) {
+ cache = &dev->srCache[i];
+ lowest = cache->chunkId;
+ }
+ }
+ }
+
+ if (cache && !cache->locked) {
+ /* Write it out and free it up */
+
+ chunkWritten =
+ yaffs_WriteChunkDataToObject(cache->object,
+ cache->chunkId,
+ cache->data,
+ cache->nBytes,
+ 1);
+ cache->dirty = 0;
+ cache->object = NULL;
+ }
+
+ } while (cache && chunkWritten > 0);
+
+ if (cache) {
+ /* Hoosterman, disk full while writing cache out. */
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("yaffs tragedy: no space during cache write" TENDSTR)));
+
+ }
+ }
+
+}
+
+/*yaffs_FlushEntireDeviceCache(dev)
+ *
+ *
+ */
+
+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev)
+{
+ yaffs_Object *obj;
+ int nCaches = dev->nShortOpCaches;
+ int i;
+
+ /* Find a dirty object in the cache and flush it...
+ * until there are no further dirty objects.
+ */
+ do {
+ obj = NULL;
+ for( i = 0; i < nCaches && !obj; i++) {
+ if (dev->srCache[i].object &&
+ dev->srCache[i].dirty)
+ obj = dev->srCache[i].object;
+
+ }
+ if(obj)
+ yaffs_FlushFilesChunkCache(obj);
+
+ } while(obj);
+
+}
+
+
+/* Grab us a cache chunk for use.
+ * First look for an empty one.
+ * Then look for the least recently used non-dirty one.
+ * Then look for the least recently used dirty one...., flush and look again.
+ */
+static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
+{
+ int i;
+ int usage;
+ int theOne;
+
+ if (dev->nShortOpCaches > 0) {
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if (!dev->srCache[i].object)
+ return &dev->srCache[i];
+ }
+
+ return NULL;
+
+ theOne = -1;
+ usage = 0; /* just to stop the compiler grizzling */
+
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if (!dev->srCache[i].dirty &&
+ ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+ theOne < 0)) {
+ usage = dev->srCache[i].lastUse;
+ theOne = i;
+ }
+ }
+
+
+ return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+ } else {
+ return NULL;
+ }
+
+}
+
+static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
+{
+ yaffs_ChunkCache *cache;
+ yaffs_Object *theObj;
+ int usage;
+ int i;
+ int pushout;
+
+ if (dev->nShortOpCaches > 0) {
+ /* Try find a non-dirty one... */
+
+ cache = yaffs_GrabChunkCacheWorker(dev);
+
+ if (!cache) {
+ /* They were all dirty, find the last recently used object and flush
+ * its cache, then find again.
+ * NB what's here is not very accurate, we actually flush the object
+ * the last recently used page.
+ */
+
+ /* With locking we can't assume we can use entry zero */
+
+ theObj = NULL;
+ usage = -1;
+ cache = NULL;
+ pushout = -1;
+
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if (dev->srCache[i].object &&
+ !dev->srCache[i].locked &&
+ (dev->srCache[i].lastUse < usage || !cache))
+ {
+ usage = dev->srCache[i].lastUse;
+ theObj = dev->srCache[i].object;
+ cache = &dev->srCache[i];
+ pushout = i;
+ }
+ }
+
+ if (!cache || cache->dirty) {
+ /* Flush and try again */
+ yaffs_FlushFilesChunkCache(theObj);
+ cache = yaffs_GrabChunkCacheWorker(dev);
+ }
+
+ }
+ return cache;
+ } else
+ return NULL;
+
+}
+
+/* Find a cached chunk */
+static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
+ int chunkId)
+{
+ yaffs_Device *dev = obj->myDev;
+ int i;
+ if (dev->nShortOpCaches > 0) {
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if (dev->srCache[i].object == obj &&
+ dev->srCache[i].chunkId == chunkId) {
+ dev->cacheHits++;
+
+ return &dev->srCache[i];
+ }
+ }
+ }
+ return NULL;
+}
+
+/* Mark the chunk for the least recently used algorithym */
+static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
+ int isAWrite)
+{
+
+ if (dev->nShortOpCaches > 0) {
+ if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ /* Reset the cache usages */
+ int i;
+ for (i = 1; i < dev->nShortOpCaches; i++) {
+ dev->srCache[i].lastUse = 0;
+ }
+ dev->srLastUse = 0;
+ }
+
+ dev->srLastUse++;
+
+ cache->lastUse = dev->srLastUse;
+
+ if (isAWrite) {
+ cache->dirty = 1;
+ }
+ }
+}
+
+/* Invalidate a single cache page.
+ * Do this when a whole page gets written,
+ * ie the short cache for this page is no longer valid.
+ */
+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
+{
+ if (object->myDev->nShortOpCaches > 0) {
+ yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+
+ if (cache) {
+ cache->object = NULL;
+ }
+ }
+}
+
+/* Invalidate all the cache pages associated with this object
+ * Do this whenever ther file is deleted or resized.
+ */
+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
+{
+ int i;
+ yaffs_Device *dev = in->myDev;
+
+ if (dev->nShortOpCaches > 0) {
+ /* Invalidate it. */
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if (dev->srCache[i].object == in) {
+ dev->srCache[i].object = NULL;
+ }
+ }
+ }
+}
+
+/*--------------------- Checkpointing --------------------*/
+
+
+static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
+{
+ yaffs_CheckpointValidity cp;
+
+ memset(&cp,0,sizeof(cp));
+
+ cp.structType = sizeof(cp);
+ cp.magic = YAFFS_MAGIC;
+ cp.version = YAFFS_CHECKPOINT_VERSION;
+ cp.head = (head) ? 1 : 0;
+
+ return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
+ 1 : 0;
+}
+
+static int yaffs_ReadCheckpointValidityMarker(yaffs_Device *dev, int head)
+{
+ yaffs_CheckpointValidity cp;
+ int ok;
+
+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+ if(ok)
+ ok = (cp.structType == sizeof(cp)) &&
+ (cp.magic == YAFFS_MAGIC) &&
+ (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+ (cp.head == ((head) ? 1 : 0));
+ return ok ? 1 : 0;
+}
+
+static void yaffs_DeviceToCheckpointDevice(yaffs_CheckpointDevice *cp,
+ yaffs_Device *dev)
+{
+ cp->nErasedBlocks = dev->nErasedBlocks;
+ cp->allocationBlock = dev->allocationBlock;
+ cp->allocationPage = dev->allocationPage;
+ cp->nFreeChunks = dev->nFreeChunks;
+
+ cp->nDeletedFiles = dev->nDeletedFiles;
+ cp->nUnlinkedFiles = dev->nUnlinkedFiles;
+ cp->nBackgroundDeletions = dev->nBackgroundDeletions;
+ cp->sequenceNumber = dev->sequenceNumber;
+ cp->oldestDirtySequence = dev->oldestDirtySequence;
+
+}
+
+static void yaffs_CheckpointDeviceToDevice(yaffs_Device *dev,
+ yaffs_CheckpointDevice *cp)
+{
+ dev->nErasedBlocks = cp->nErasedBlocks;
+ dev->allocationBlock = cp->allocationBlock;
+ dev->allocationPage = cp->allocationPage;
+ dev->nFreeChunks = cp->nFreeChunks;
+
+ dev->nDeletedFiles = cp->nDeletedFiles;
+ dev->nUnlinkedFiles = cp->nUnlinkedFiles;
+ dev->nBackgroundDeletions = cp->nBackgroundDeletions;
+ dev->sequenceNumber = cp->sequenceNumber;
+ dev->oldestDirtySequence = cp->oldestDirtySequence;
+}
+
+
+static int yaffs_WriteCheckpointDevice(yaffs_Device *dev)
+{
+ yaffs_CheckpointDevice cp;
+ __u32 nBytes;
+ __u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1);
+
+ int ok;
+
+ /* Write device runtime values*/
+ yaffs_DeviceToCheckpointDevice(&cp,dev);
+ cp.structType = sizeof(cp);
+
+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+ /* Write block info */
+ if(ok) {
+ nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
+ }
+
+ /* Write chunk bits */
+ if(ok) {
+ nBytes = nBlocks * dev->chunkBitmapStride;
+ ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
+ }
+ return ok ? 1 : 0;
+
+}
+
+static int yaffs_ReadCheckpointDevice(yaffs_Device *dev)
+{
+ yaffs_CheckpointDevice cp;
+ __u32 nBytes;
+ __u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1);
+
+ int ok;
+
+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+ if(!ok)
+ return 0;
+
+ if(cp.structType != sizeof(cp))
+ return 0;
+
+
+ yaffs_CheckpointDeviceToDevice(dev,&cp);
+
+ nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+
+ ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
+
+ if(!ok)
+ return 0;
+ nBytes = nBlocks * dev->chunkBitmapStride;
+
+ ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
+
+ return ok ? 1 : 0;
+}
+
+static void yaffs_ObjectToCheckpointObject(yaffs_CheckpointObject *cp,
+ yaffs_Object *obj)
+{
+
+ cp->objectId = obj->objectId;
+ cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+ cp->chunkId = obj->chunkId;
+ cp->variantType = obj->variantType;
+ cp->deleted = obj->deleted;
+ cp->softDeleted = obj->softDeleted;
+ cp->unlinked = obj->unlinked;
+ cp->fake = obj->fake;
+ cp->renameAllowed = obj->renameAllowed;
+ cp->unlinkAllowed = obj->unlinkAllowed;
+ cp->serial = obj->serial;
+ cp->nDataChunks = obj->nDataChunks;
+
+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+ else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+}
+
+static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
+{
+
+ yaffs_Object *parent;
+
+ obj->objectId = cp->objectId;
+
+ if(cp->parentId)
+ parent = yaffs_FindOrCreateObjectByNumber(
+ obj->myDev,
+ cp->parentId,
+ YAFFS_OBJECT_TYPE_DIRECTORY);
+ else
+ parent = NULL;
+
+ if(parent)
+ yaffs_AddObjectToDirectory(parent, obj);
+
+ obj->chunkId = cp->chunkId;
+ obj->variantType = cp->variantType;
+ obj->deleted = cp->deleted;
+ obj->softDeleted = cp->softDeleted;
+ obj->unlinked = cp->unlinked;
+ obj->fake = cp->fake;
+ obj->renameAllowed = cp->renameAllowed;
+ obj->unlinkAllowed = cp->unlinkAllowed;
+ obj->serial = cp->serial;
+ obj->nDataChunks = cp->nDataChunks;
+
+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+ else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+
+ if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
+ obj->lazyLoaded = 1;
+}
+
+
+
+static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+ __u32 level, int chunkOffset)
+{
+ int i;
+ yaffs_Device *dev = in->myDev;
+ int ok = 1;
+ int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+
+ if (tn) {
+ if (level > 0) {
+
+ for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
+ if (tn->internal[i]) {
+ ok = yaffs_CheckpointTnodeWorker(in,
+ tn->internal[i],
+ level - 1,
+ (chunkOffset<<YAFFS_TNODES_INTERNAL_BITS) + i);
+ }
+ }
+ } else if (level == 0) {
+ __u32 baseOffset = chunkOffset << YAFFS_TNODES_LEVEL0_BITS;
+ /* printf("write tnode at %d\n",baseOffset); */
+ ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+ if(ok)
+ ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
+ }
+ }
+
+ return ok;
+
+}
+
+static int yaffs_WriteCheckpointTnodes(yaffs_Object *obj)
+{
+ __u32 endMarker = ~0;
+ int ok = 1;
+
+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
+ ok = yaffs_CheckpointTnodeWorker(obj,
+ obj->variant.fileVariant.top,
+ obj->variant.fileVariant.topLevel,
+ 0);
+ if(ok)
+ ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
+ sizeof(endMarker));
+ }
+
+ return ok ? 1 : 0;
+}
+
+static int yaffs_ReadCheckpointTnodes(yaffs_Object *obj)
+{
+ __u32 baseChunk;
+ int ok = 1;
+ yaffs_Device *dev = obj->myDev;
+ yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ yaffs_Tnode *tn;
+ int nread = 0;
+
+ ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
+
+ while(ok && (~baseChunk)){
+ nread++;
+ /* Read level 0 tnode */
+
+
+ /* printf("read tnode at %d\n",baseChunk); */
+ tn = yaffs_GetTnodeRaw(dev);
+ if(tn)
+ ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+ (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+ else
+ ok = 0;
+
+ if(tn && ok){
+ ok = yaffs_AddOrFindLevel0Tnode(dev,
+ fileStructPtr,
+ baseChunk,
+ tn) ? 1 : 0;
+
+ }
+
+ if(ok)
+ ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
+
+ }
+
+ T(YAFFS_TRACE_CHECKPOINT,(
+ TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+ nread,baseChunk,ok));
+
+ return ok ? 1 : 0;
+}
+
+
+static int yaffs_WriteCheckpointObjects(yaffs_Device *dev)
+{
+ yaffs_Object *obj;
+ yaffs_CheckpointObject cp;
+ int i;
+ int ok = 1;
+ struct list_head *lh;
+
+
+ /* Iterate through the objects in each hash entry,
+ * dumping them to the checkpointing stream.
+ */
+
+ for(i = 0; ok && i < YAFFS_NOBJECT_BUCKETS; i++){
+ list_for_each(lh, &dev->objectBucket[i].list) {
+ if (lh) {
+ obj = list_entry(lh, yaffs_Object, hashLink);
+ if (!obj->deferedFree) {
+ yaffs_ObjectToCheckpointObject(&cp,obj);
+ cp.structType = sizeof(cp);
+
+ T(YAFFS_TRACE_CHECKPOINT,(
+ TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+ cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
+
+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+ if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
+ ok = yaffs_WriteCheckpointTnodes(obj);
+ }
+ }
+ }
+ }
+ }
+
+ /* Dump end of list */
+ memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
+ cp.structType = sizeof(cp);
+
+ if(ok)
+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+ return ok ? 1 : 0;
+}
+
+static int yaffs_ReadCheckpointObjects(yaffs_Device *dev)
+{
+ yaffs_Object *obj;
+ yaffs_CheckpointObject cp;
+ int ok = 1;
+ int done = 0;
+ yaffs_Object *hardList = NULL;
+
+ while(ok && !done) {
+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+ if(cp.structType != sizeof(cp)) {
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+ cp.structType,sizeof(cp),ok));
+ ok = 0;
+ }
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+ cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
+
+ if(ok && cp.objectId == ~0)
+ done = 1;
+ else if(ok){
+ obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+ if(obj) {
+ yaffs_CheckpointObjectToObject(obj,&cp);
+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ ok = yaffs_ReadCheckpointTnodes(obj);
+ } else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ obj->hardLinks.next =
+ (struct list_head *)
+ hardList;
+ hardList = obj;
+ }
+
+ }
+ }
+ }
+
+ if(ok)
+ yaffs_HardlinkFixup(dev,hardList);
+
+ return ok ? 1 : 0;
+}
+
+static int yaffs_WriteCheckpointSum(yaffs_Device *dev)
+{
+ __u32 checkpointSum;
+ int ok;
+
+ yaffs_GetCheckpointSum(dev,&checkpointSum);
+
+ ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
+
+ if(!ok)
+ return 0;
+
+ return 1;
+}
+
+static int yaffs_ReadCheckpointSum(yaffs_Device *dev)
+{
+ __u32 checkpointSum0;
+ __u32 checkpointSum1;
+ int ok;
+
+ yaffs_GetCheckpointSum(dev,&checkpointSum0);
+
+ ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+
+ if(!ok)
+ return 0;
+
+ if(checkpointSum0 != checkpointSum1)
+ return 0;
+
+ return 1;
+}
+
+
+static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+{
+
+ int ok = 1;
+
+ if(dev->skipCheckpointWrite || !dev->isYaffs2){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
+ ok = 0;
+ }
+
+ if(ok)
+ ok = yaffs_CheckpointOpen(dev,1);
+
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+ ok = yaffs_WriteCheckpointValidityMarker(dev,1);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
+ ok = yaffs_WriteCheckpointDevice(dev);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
+ ok = yaffs_WriteCheckpointObjects(dev);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+ ok = yaffs_WriteCheckpointValidityMarker(dev,0);
+ }
+
+ if(ok){
+ ok = yaffs_WriteCheckpointSum(dev);
+ }
+
+
+ if(!yaffs_CheckpointClose(dev))
+ ok = 0;
+
+ if(ok)
+ dev->isCheckpointed = 1;
+ else
+ dev->isCheckpointed = 0;
+
+ return dev->isCheckpointed;
+}
+
+static int yaffs_ReadCheckpointData(yaffs_Device *dev)
+{
+ int ok = 1;
+
+ if(dev->skipCheckpointRead || !dev->isYaffs2){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
+ ok = 0;
+ }
+
+ if(ok)
+ ok = yaffs_CheckpointOpen(dev,0); /* open for read */
+
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+ ok = yaffs_ReadCheckpointValidityMarker(dev,1);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
+ ok = yaffs_ReadCheckpointDevice(dev);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
+ ok = yaffs_ReadCheckpointObjects(dev);
+ }
+ if(ok){
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+ ok = yaffs_ReadCheckpointValidityMarker(dev,0);
+ }
+
+ if(ok){
+ ok = yaffs_ReadCheckpointSum(dev);
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
+ }
+
+ if(!yaffs_CheckpointClose(dev))
+ ok = 0;
+
+ if(ok)
+ dev->isCheckpointed = 1;
+ else
+ dev->isCheckpointed = 0;
+
+ return ok ? 1 : 0;
+
+}
+
+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+{
+ if(dev->isCheckpointed ||
+ dev->blocksInCheckpoint > 0){
+ dev->isCheckpointed = 0;
+ yaffs_CheckpointInvalidateStream(dev);
+ if(dev->superBlock && dev->markSuperBlockDirty)
+ dev->markSuperBlockDirty(dev->superBlock);
+ }
+}
+
+
+int yaffs_CheckpointSave(yaffs_Device *dev)
+{
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+ yaffs_VerifyObjects(dev);
+ yaffs_VerifyBlocks(dev);
+ yaffs_VerifyFreeChunks(dev);
+
+ if(!dev->isCheckpointed) {
+ yaffs_InvalidateCheckpoint(dev);
+ yaffs_WriteCheckpointData(dev);
+ }
+
+ T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+ return dev->isCheckpointed;
+}
+
+int yaffs_CheckpointRestore(yaffs_Device *dev)
+{
+ int retval;
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+ retval = yaffs_ReadCheckpointData(dev);
+
+ if(dev->isCheckpointed){
+ yaffs_VerifyObjects(dev);
+ yaffs_VerifyBlocks(dev);
+ yaffs_VerifyFreeChunks(dev);
+ }
+
+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+ return retval;
+}
+
+/*--------------------- File read/write ------------------------
+ * Read and write have very similar structures.
+ * In general the read/write has three parts to it
+ * An incomplete chunk to start with (if the read/write is not chunk-aligned)
+ * Some complete chunks
+ * An incomplete chunk to end off with
+ *
+ * Curve-balls: the first chunk might also be the last chunk.
+ */
+
+int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+ int nBytes)
+{
+
+ int chunk;
+ int start;
+ int nToCopy;
+ int n = nBytes;
+ int nDone = 0;
+ yaffs_ChunkCache *cache;
+
+ yaffs_Device *dev;
+
+ dev = in->myDev;
+
+ while (n > 0) {
+ //chunk = offset / dev->nDataBytesPerChunk + 1;
+ //start = offset % dev->nDataBytesPerChunk;
+ yaffs_AddrToChunk(dev,offset,&chunk,&start);
+ chunk++;
+
+ /* OK now check for the curveball where the start and end are in
+ * the same chunk.
+ */
+ if ((start + n) < dev->nDataBytesPerChunk) {
+ nToCopy = n;
+ } else {
+ nToCopy = dev->nDataBytesPerChunk - start;
+ }
+
+ cache = yaffs_FindChunkCache(in, chunk);
+
+ /* If the chunk is already in the cache or it is less than a whole chunk
+ * then use the cache (if there is caching)
+ * else bypass the cache.
+ */
+ if (cache || nToCopy != dev->nDataBytesPerChunk) {
+ if (dev->nShortOpCaches > 0) {
+
+ /* If we can't find the data in the cache, then load it up. */
+
+ if (!cache) {
+ cache = yaffs_GrabChunkCache(in->myDev);
+ cache->object = in;
+ cache->chunkId = chunk;
+ cache->dirty = 0;
+ cache->locked = 0;
+ yaffs_ReadChunkDataFromObject(in, chunk,
+ cache->
+ data);
+ cache->nBytes = 0;
+ }
+
+ yaffs_UseChunkCache(dev, cache, 0);
+
+ cache->locked = 1;
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+ memcpy(buffer, &cache->data[start], nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+#endif
+ cache->locked = 0;
+ } else {
+ /* Read into the local buffer then copy..*/
+
+ __u8 *localBuffer =
+ yaffs_GetTempBuffer(dev, __LINE__);
+ yaffs_ReadChunkDataFromObject(in, chunk,
+ localBuffer);
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+ memcpy(buffer, &localBuffer[start], nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+#endif
+ yaffs_ReleaseTempBuffer(dev, localBuffer,
+ __LINE__);
+ }
+
+ } else {
+#ifdef CONFIG_YAFFS_WINCE
+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+ /* Under WinCE can't do direct transfer. Need to use a local buffer.
+ * This is because we otherwise screw up WinCE's memory mapper
+ */
+ yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+ memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+#endif
+
+#else
+ /* A full chunk. Read directly into the supplied buffer. */
+ yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+#endif
+ }
+
+ n -= nToCopy;
+ offset += nToCopy;
+ buffer += nToCopy;
+ nDone += nToCopy;
+
+ }
+
+ return nDone;
+}
+
+int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+ int nBytes, int writeThrough)
+{
+
+ int chunk;
+ int start;
+ int nToCopy;
+ int n = nBytes;
+ int nDone = 0;
+ int nToWriteBack;
+ int startOfWrite = offset;
+ int chunkWritten = 0;
+ int nBytesRead;
+
+ yaffs_Device *dev;
+
+ dev = in->myDev;
+
+ while (n > 0 && chunkWritten >= 0) {
+ //chunk = offset / dev->nDataBytesPerChunk + 1;
+ //start = offset % dev->nDataBytesPerChunk;
+ yaffs_AddrToChunk(dev,offset,&chunk,&start);
+ chunk++;
+
+ /* OK now check for the curveball where the start and end are in
+ * the same chunk.
+ */
+
+ if ((start + n) < dev->nDataBytesPerChunk) {
+ nToCopy = n;
+
+ /* Now folks, to calculate how many bytes to write back....
+ * If we're overwriting and not writing to then end of file then
+ * we need to write back as much as was there before.
+ */
+
+ nBytesRead =
+ in->variant.fileVariant.fileSize -
+ ((chunk - 1) * dev->nDataBytesPerChunk);
+
+ if (nBytesRead > dev->nDataBytesPerChunk) {
+ nBytesRead = dev->nDataBytesPerChunk;
+ }
+
+ nToWriteBack =
+ (nBytesRead >
+ (start + n)) ? nBytesRead : (start + n);
+
+ } else {
+ nToCopy = dev->nDataBytesPerChunk - start;
+ nToWriteBack = dev->nDataBytesPerChunk;
+ }
+
+ if (nToCopy != dev->nDataBytesPerChunk) {
+ /* An incomplete start or end chunk (or maybe both start and end chunk) */
+ if (dev->nShortOpCaches > 0) {
+ yaffs_ChunkCache *cache;
+ /* If we can't find the data in the cache, then load the cache */
+ cache = yaffs_FindChunkCache(in, chunk);
+
+ if (!cache
+ && yaffs_CheckSpaceForAllocation(in->
+ myDev)) {
+ cache = yaffs_GrabChunkCache(in->myDev);
+ cache->object = in;
+ cache->chunkId = chunk;
+ cache->dirty = 0;
+ cache->locked = 0;
+ yaffs_ReadChunkDataFromObject(in, chunk,
+ cache->
+ data);
+ }
+ else if(cache &&
+ !cache->dirty &&
+ !yaffs_CheckSpaceForAllocation(in->myDev)){
+ /* Drop the cache if it was a read cache item and
+ * no space check has been made for it.
+ */
+ cache = NULL;
+ }
+
+ if (cache) {
+ yaffs_UseChunkCache(dev, cache, 1);
+ cache->locked = 1;
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+
+ memcpy(&cache->data[start], buffer,
+ nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+#endif
+ cache->locked = 0;
+ cache->nBytes = nToWriteBack;
+
+ if (writeThrough) {
+ chunkWritten =
+ yaffs_WriteChunkDataToObject
+ (cache->object,
+ cache->chunkId,
+ cache->data, cache->nBytes,
+ 1);
+ cache->dirty = 0;
+ }
+
+ } else {
+ chunkWritten = -1; /* fail the write */
+ }
+ } else {
+ /* An incomplete start or end chunk (or maybe both start and end chunk)
+ * Read into the local buffer then copy, then copy over and write back.
+ */
+
+ __u8 *localBuffer =
+ yaffs_GetTempBuffer(dev, __LINE__);
+
+ yaffs_ReadChunkDataFromObject(in, chunk,
+ localBuffer);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+
+ memcpy(&localBuffer[start], buffer, nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+#endif
+ chunkWritten =
+ yaffs_WriteChunkDataToObject(in, chunk,
+ localBuffer,
+ nToWriteBack,
+ 0);
+
+ yaffs_ReleaseTempBuffer(dev, localBuffer,
+ __LINE__);
+
+ }
+
+ } else {
+
+#ifdef CONFIG_YAFFS_WINCE
+ /* Under WinCE can't do direct transfer. Need to use a local buffer.
+ * This is because we otherwise screw up WinCE's memory mapper
+ */
+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_UnlockYAFFS(TRUE);
+#endif
+ memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_LockYAFFS(TRUE);
+#endif
+ chunkWritten =
+ yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+ dev->nDataBytesPerChunk,
+ 0);
+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+#else
+ /* A full chunk. Write directly from the supplied buffer. */
+ chunkWritten =
+ yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ dev->nDataBytesPerChunk,
+ 0);
+#endif
+ /* Since we've overwritten the cached data, we better invalidate it. */
+ yaffs_InvalidateChunkCache(in, chunk);
+ }
+
+ if (chunkWritten >= 0) {
+ n -= nToCopy;
+ offset += nToCopy;
+ buffer += nToCopy;
+ nDone += nToCopy;
+ }
+
+ }
+
+ /* Update file object */
+
+ if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
+ in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+ }
+
+ in->dirty = 1;
+
+ return nDone;
+}
+
+
+/* ---------------------- File resizing stuff ------------------ */
+
+static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
+{
+
+ yaffs_Device *dev = in->myDev;
+ int oldFileSize = in->variant.fileVariant.fileSize;
+
+ int lastDel = 1 + (oldFileSize - 1) / dev->nDataBytesPerChunk;
+
+ int startDel = 1 + (newSize + dev->nDataBytesPerChunk - 1) /
+ dev->nDataBytesPerChunk;
+ int i;
+ int chunkId;
+
+ /* Delete backwards so that we don't end up with holes if
+ * power is lost part-way through the operation.
+ */
+ for (i = lastDel; i >= startDel; i--) {
+ /* NB this could be optimised somewhat,
+ * eg. could retrieve the tags and write them without
+ * using yaffs_DeleteChunk
+ */
+
+ chunkId = yaffs_FindAndDeleteChunkInFile(in, i, NULL);
+ if (chunkId > 0) {
+ if (chunkId <
+ (dev->internalStartBlock * dev->nChunksPerBlock)
+ || chunkId >=
+ ((dev->internalEndBlock +
+ 1) * dev->nChunksPerBlock)) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("Found daft chunkId %d for %d" TENDSTR),
+ chunkId, i));
+ } else {
+ in->nDataChunks--;
+ yaffs_DeleteChunk(dev, chunkId, 1, __LINE__);
+ }
+ }
+ }
+
+}
+
+int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
+{
+
+ int oldFileSize = in->variant.fileVariant.fileSize;
+ int newSizeOfPartialChunk;
+ int newFullChunks;
+
+ yaffs_Device *dev = in->myDev;
+
+ yaffs_AddrToChunk(dev, newSize, &newFullChunks, &newSizeOfPartialChunk);
+
+ yaffs_FlushFilesChunkCache(in);
+ yaffs_InvalidateWholeChunkCache(in);
+
+ yaffs_CheckGarbageCollection(dev);
+
+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+ return yaffs_GetFileSize(in);
+ }
+
+ if (newSize == oldFileSize) {
+ return oldFileSize;
+ }
+
+ if (newSize < oldFileSize) {
+
+ yaffs_PruneResizedChunks(in, newSize);
+
+ if (newSizeOfPartialChunk != 0) {
+ int lastChunk = 1 + newFullChunks;
+
+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+ /* Got to read and rewrite the last chunk with its new size and zero pad */
+ yaffs_ReadChunkDataFromObject(in, lastChunk,
+ localBuffer);
+
+ memset(localBuffer + newSizeOfPartialChunk, 0,
+ dev->nDataBytesPerChunk - newSizeOfPartialChunk);
+
+ yaffs_WriteChunkDataToObject(in, lastChunk, localBuffer,
+ newSizeOfPartialChunk, 1);
+
+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+ }
+
+ in->variant.fileVariant.fileSize = newSize;
+
+ yaffs_PruneFileStructure(dev, &in->variant.fileVariant);
+ } else {
+ /* newsSize > oldFileSize */
+ in->variant.fileVariant.fileSize = newSize;
+ }
+
+
+
+ /* Write a new object header.
+ * show we've shrunk the file, if need be
+ * Do this only if the file is not in the deleted directories.
+ */
+ if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+ in->parent->objectId != YAFFS_OBJECTID_DELETED) {
+ yaffs_UpdateObjectHeader(in, NULL, 0,
+ (newSize < oldFileSize) ? 1 : 0, 0);
+ }
+
+ return YAFFS_OK;
+}
+
+loff_t yaffs_GetFileSize(yaffs_Object * obj)
+{
+ obj = yaffs_GetEquivalentObject(obj);
+
+ switch (obj->variantType) {
+ case YAFFS_OBJECT_TYPE_FILE:
+ return obj->variant.fileVariant.fileSize;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ return yaffs_strlen(obj->variant.symLinkVariant.alias);
+ default:
+ return 0;
+ }
+}
+
+
+
+int yaffs_FlushFile(yaffs_Object * in, int updateTime)
+{
+ int retVal;
+ if (in->dirty) {
+ yaffs_FlushFilesChunkCache(in);
+ if (updateTime) {
+#ifdef CONFIG_YAFFS_WINCE
+ yfsd_WinFileTimeNow(in->win_mtime);
+#else
+
+ in->yst_mtime = Y_CURRENT_TIME;
+
+#endif
+ }
+
+ retVal =
+ (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+ 0) ? YAFFS_OK : YAFFS_FAIL;
+ } else {
+ retVal = YAFFS_OK;
+ }
+
+ return retVal;
+
+}
+
+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
+{
+
+ /* First off, invalidate the file's data in the cache, without flushing. */
+ yaffs_InvalidateWholeChunkCache(in);
+
+ if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ /* Move to the unlinked directory so we have a record that it was deleted. */
+ yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
+
+ }
+
+ yaffs_RemoveObjectFromDirectory(in);
+ yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+ in->chunkId = -1;
+
+ yaffs_FreeObject(in);
+ return YAFFS_OK;
+
+}
+
+/* yaffs_DeleteFile deletes the whole file data
+ * and the inode associated with the file.
+ * It does not delete the links associated with the file.
+ */
+static int yaffs_UnlinkFile(yaffs_Object * in)
+{
+
+ int retVal;
+ int immediateDeletion = 0;
+
+ if (1) {
+/* XXX U-BOOT XXX */
+#if 0
+#ifdef __KERNEL__
+ if (!in->myInode) {
+ immediateDeletion = 1;
+
+ }
+#endif
+#else
+ if (in->inUse <= 0) {
+ immediateDeletion = 1;
+
+ }
+#endif
+ if (immediateDeletion) {
+ retVal =
+ yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+ "deleted", 0, 0);
+ T(YAFFS_TRACE_TRACING,
+ (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+ in->objectId));
+ in->deleted = 1;
+ in->myDev->nDeletedFiles++;
+ if (0 && in->myDev->isYaffs2) {
+ yaffs_ResizeFile(in, 0);
+ }
+ yaffs_SoftDeleteFile(in);
+ } else {
+ retVal =
+ yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+ "unlinked", 0, 0);
+ }
+
+ }
+ return retVal;
+}
+
+int yaffs_DeleteFile(yaffs_Object * in)
+{
+ int retVal = YAFFS_OK;
+
+ if (in->nDataChunks > 0) {
+ /* Use soft deletion if there is data in the file */
+ if (!in->unlinked) {
+ retVal = yaffs_UnlinkFile(in);
+ }
+ if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ in->deleted = 1;
+ in->myDev->nDeletedFiles++;
+ yaffs_SoftDeleteFile(in);
+ }
+ return in->deleted ? YAFFS_OK : YAFFS_FAIL;
+ } else {
+ /* The file has no data chunks so we toss it immediately */
+ yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+ in->variant.fileVariant.top = NULL;
+ yaffs_DoGenericObjectDeletion(in);
+
+ return YAFFS_OK;
+ }
+}
+
+static int yaffs_DeleteDirectory(yaffs_Object * in)
+{
+ /* First check that the directory is empty. */
+ if (list_empty(&in->variant.directoryVariant.children)) {
+ return yaffs_DoGenericObjectDeletion(in);
+ }
+
+ return YAFFS_FAIL;
+
+}
+
+static int yaffs_DeleteSymLink(yaffs_Object * in)
+{
+ YFREE(in->variant.symLinkVariant.alias);
+
+ return yaffs_DoGenericObjectDeletion(in);
+}
+
+static int yaffs_DeleteHardLink(yaffs_Object * in)
+{
+ /* remove this hardlink from the list assocaited with the equivalent
+ * object
+ */
+ list_del(&in->hardLinks);
+ return yaffs_DoGenericObjectDeletion(in);
+}
+
+static void yaffs_DestroyObject(yaffs_Object * obj)
+{
+ switch (obj->variantType) {
+ case YAFFS_OBJECT_TYPE_FILE:
+ yaffs_DeleteFile(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ yaffs_DeleteDirectory(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ yaffs_DeleteSymLink(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ yaffs_DeleteHardLink(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ yaffs_DoGenericObjectDeletion(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ break; /* should not happen. */
+ }
+}
+
+static int yaffs_UnlinkWorker(yaffs_Object * obj)
+{
+
+ if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ return yaffs_DeleteHardLink(obj);
+ } else if (!list_empty(&obj->hardLinks)) {
+ /* Curve ball: We're unlinking an object that has a hardlink.
+ *
+ * This problem arises because we are not strictly following
+ * The Linux link/inode model.
+ *
+ * We can't really delete the object.
+ * Instead, we do the following:
+ * - Select a hardlink.
+ * - Unhook it from the hard links
+ * - Unhook it from its parent directory (so that the rename can work)
+ * - Rename the object to the hardlink's name.
+ * - Delete the hardlink
+ */
+
+ yaffs_Object *hl;
+ int retVal;
+ YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+
+ hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+
+ list_del_init(&hl->hardLinks);
+ list_del_init(&hl->siblings);
+
+ yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+
+ retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+
+ if (retVal == YAFFS_OK) {
+ retVal = yaffs_DoGenericObjectDeletion(hl);
+ }
+ return retVal;
+
+ } else {
+ switch (obj->variantType) {
+ case YAFFS_OBJECT_TYPE_FILE:
+ return yaffs_UnlinkFile(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ return yaffs_DeleteDirectory(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ return yaffs_DeleteSymLink(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ return yaffs_DoGenericObjectDeletion(obj);
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ default:
+ return YAFFS_FAIL;
+ }
+ }
+}
+
+
+static int yaffs_UnlinkObject( yaffs_Object *obj)
+{
+
+ if (obj && obj->unlinkAllowed) {
+ return yaffs_UnlinkWorker(obj);
+ }
+
+ return YAFFS_FAIL;
+
+}
+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
+{
+ yaffs_Object *obj;
+
+ obj = yaffs_FindObjectByName(dir, name);
+ return yaffs_UnlinkObject(obj);
+}
+
+/*----------------------- Initialisation Scanning ---------------------- */
+
+static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+ int backwardScanning)
+{
+ yaffs_Object *obj;
+
+ if (!backwardScanning) {
+ /* Handle YAFFS1 forward scanning case
+ * For YAFFS1 we always do the deletion
+ */
+
+ } else {
+ /* Handle YAFFS2 case (backward scanning)
+ * If the shadowed object exists then ignore.
+ */
+ if (yaffs_FindObjectByNumber(dev, objId)) {
+ return;
+ }
+ }
+
+ /* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+ * We put it in unlinked dir to be cleaned up after the scanning
+ */
+ obj =
+ yaffs_FindOrCreateObjectByNumber(dev, objId,
+ YAFFS_OBJECT_TYPE_FILE);
+ yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ obj->variant.fileVariant.shrinkSize = 0;
+ obj->valid = 1; /* So that we don't read any other info for this file */
+
+}
+
+typedef struct {
+ int seq;
+ int block;
+} yaffs_BlockIndex;
+
+
+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList)
+{
+ yaffs_Object *hl;
+ yaffs_Object *in;
+
+ while (hardList) {
+ hl = hardList;
+ hardList = (yaffs_Object *) (hardList->hardLinks.next);
+
+ in = yaffs_FindObjectByNumber(dev,
+ hl->variant.hardLinkVariant.
+ equivalentObjectId);
+
+ if (in) {
+ /* Add the hardlink pointers */
+ hl->variant.hardLinkVariant.equivalentObject = in;
+ list_add(&hl->hardLinks, &in->hardLinks);
+ } else {
+ /* Todo Need to report/handle this better.
+ * Got a problem... hardlink to a non-existant object
+ */
+ hl->variant.hardLinkVariant.equivalentObject = NULL;
+ INIT_LIST_HEAD(&hl->hardLinks);
+
+ }
+
+ }
+
+}
+
+
+
+
+
+static int ybicmp(const void *a, const void *b){
+ register int aseq = ((yaffs_BlockIndex *)a)->seq;
+ register int bseq = ((yaffs_BlockIndex *)b)->seq;
+ register int ablock = ((yaffs_BlockIndex *)a)->block;
+ register int bblock = ((yaffs_BlockIndex *)b)->block;
+ if( aseq == bseq )
+ return ablock - bblock;
+ else
+ return aseq - bseq;
+
+}
+
+static int yaffs_Scan(yaffs_Device * dev)
+{
+ yaffs_ExtendedTags tags;
+ int blk;
+ int blockIterator;
+ int startIterator;
+ int endIterator;
+ int nBlocksToScan = 0;
+ int result;
+
+ int chunk;
+ int c;
+ int deleted;
+ yaffs_BlockState state;
+ yaffs_Object *hardList = NULL;
+ yaffs_BlockInfo *bi;
+ int sequenceNumber;
+ yaffs_ObjectHeader *oh;
+ yaffs_Object *in;
+ yaffs_Object *parent;
+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+
+ int alloc_failed = 0;
+
+
+ __u8 *chunkData;
+
+ yaffs_BlockIndex *blockIndex = NULL;
+
+ if (dev->isYaffs2) {
+ T(YAFFS_TRACE_SCAN,
+ (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ //TODO Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+
+ T(YAFFS_TRACE_SCAN,
+ (TSTR("yaffs_Scan starts intstartblk %d intendblk %d..." TENDSTR),
+ dev->internalStartBlock, dev->internalEndBlock));
+
+ chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+ dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+
+ if (dev->isYaffs2) {
+ blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ if(!blockIndex)
+ return YAFFS_FAIL;
+ }
+
+ /* Scan all the blocks to determine their state */
+ for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ bi = yaffs_GetBlockInfo(dev, blk);
+ yaffs_ClearChunkBits(dev, blk);
+ bi->pagesInUse = 0;
+ bi->softDeletions = 0;
+
+ yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber);
+
+ bi->blockState = state;
+ bi->sequenceNumber = sequenceNumber;
+
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ state, sequenceNumber));
+
+ if (state == YAFFS_BLOCK_STATE_DEAD) {
+ T(YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("block %d is bad" TENDSTR), blk));
+ } else if (state == YAFFS_BLOCK_STATE_EMPTY) {
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("Block empty " TENDSTR)));
+ dev->nErasedBlocks++;
+ dev->nFreeChunks += dev->nChunksPerBlock;
+ } else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+
+ /* Determine the highest sequence number */
+ if (dev->isYaffs2 &&
+ sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+
+ blockIndex[nBlocksToScan].seq = sequenceNumber;
+ blockIndex[nBlocksToScan].block = blk;
+
+ nBlocksToScan++;
+
+ if (sequenceNumber >= dev->sequenceNumber) {
+ dev->sequenceNumber = sequenceNumber;
+ }
+ } else if (dev->isYaffs2) {
+ /* TODO: Nasty sequence number! */
+ T(YAFFS_TRACE_SCAN,
+ (TSTR
+ ("Block scanning block %d has bad sequence number %d"
+ TENDSTR), blk, sequenceNumber));
+
+ }
+ }
+ }
+
+ /* Sort the blocks
+ * Dungy old bubble sort for now...
+ */
+ if (dev->isYaffs2) {
+ yaffs_BlockIndex temp;
+ int i;
+ int j;
+
+ for (i = 0; i < nBlocksToScan; i++)
+ for (j = i + 1; j < nBlocksToScan; j++)
+ if (blockIndex[i].seq > blockIndex[j].seq) {
+ temp = blockIndex[j];
+ blockIndex[j] = blockIndex[i];
+ blockIndex[i] = temp;
+ }
+ }
+
+ /* Now scan the blocks looking at the data. */
+ if (dev->isYaffs2) {
+ startIterator = 0;
+ endIterator = nBlocksToScan - 1;
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+ } else {
+ startIterator = dev->internalStartBlock;
+ endIterator = dev->internalEndBlock;
+ }
+
+ /* For each block.... */
+ for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ blockIterator++) {
+
+ if (dev->isYaffs2) {
+ /* get the block to scan in the correct order */
+ blk = blockIndex[blockIterator].block;
+ } else {
+ blk = blockIterator;
+ }
+
+ bi = yaffs_GetBlockInfo(dev, blk);
+ state = bi->blockState;
+
+ deleted = 0;
+
+ /* For each chunk in each block that needs scanning....*/
+ for (c = 0; !alloc_failed && c < dev->nChunksPerBlock &&
+ state == YAFFS_BLOCK_STATE_NEEDS_SCANNING; c++) {
+ /* Read the tags and decide what to do */
+ chunk = blk * dev->nChunksPerBlock + c;
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL,
+ &tags);
+
+ /* Let's have a good look at this chunk... */
+
+ if (!dev->isYaffs2 && tags.chunkDeleted) {
+ /* YAFFS1 only...
+ * A deleted chunk
+ */
+ deleted++;
+ dev->nFreeChunks++;
+ /*T((" %d %d deleted\n",blk,c)); */
+ } else if (!tags.chunkUsed) {
+ /* An unassigned chunk in the block
+ * This means that either the block is empty or
+ * this is the one being allocated from
+ */
+
+ if (c == 0) {
+ /* We're looking at the first chunk in the block so the block is unused */
+ state = YAFFS_BLOCK_STATE_EMPTY;
+ dev->nErasedBlocks++;
+ } else {
+ /* this is the block being allocated from */
+ T(YAFFS_TRACE_SCAN,
+ (TSTR
+ (" Allocating from %d %d" TENDSTR),
+ blk, c));
+ state = YAFFS_BLOCK_STATE_ALLOCATING;
+ dev->allocationBlock = blk;
+ dev->allocationPage = c;
+ dev->allocationBlockFinder = blk;
+ /* Set it to here to encourage the allocator to go forth from here. */
+
+ /* Yaffs2 sanity check:
+ * This should be the one with the highest sequence number
+ */
+ if (dev->isYaffs2
+ && (dev->sequenceNumber !=
+ bi->sequenceNumber)) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("yaffs: Allocation block %d was not highest sequence id:"
+ " block seq = %d, dev seq = %d"
+ TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+ }
+ }
+
+ dev->nFreeChunks += (dev->nChunksPerBlock - c);
+ } else if (tags.chunkId > 0) {
+ /* chunkId > 0 so it is a data chunk... */
+ unsigned int endpos;
+
+ yaffs_SetChunkBit(dev, blk, c);
+ bi->pagesInUse++;
+
+ in = yaffs_FindOrCreateObjectByNumber(dev,
+ tags.
+ objectId,
+ YAFFS_OBJECT_TYPE_FILE);
+ /* PutChunkIntoFile checks for a clash (two data chunks with
+ * the same chunkId).
+ */
+
+ if(!in)
+ alloc_failed = 1;
+
+ if(in){
+ if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
+ alloc_failed = 1;
+ }
+
+ endpos =
+ (tags.chunkId - 1) * dev->nDataBytesPerChunk +
+ tags.byteCount;
+ if (in &&
+ in->variantType == YAFFS_OBJECT_TYPE_FILE
+ && in->variant.fileVariant.scannedFileSize <
+ endpos) {
+ in->variant.fileVariant.
+ scannedFileSize = endpos;
+ if (!dev->useHeaderFileSize) {
+ in->variant.fileVariant.
+ fileSize =
+ in->variant.fileVariant.
+ scannedFileSize;
+ }
+
+ }
+ /* T((" %d %d data %d %d\n",blk,c,tags.objectId,tags.chunkId)); */
+ } else {
+ /* chunkId == 0, so it is an ObjectHeader.
+ * Thus, we read in the object header and make the object
+ */
+ yaffs_SetChunkBit(dev, blk, c);
+ bi->pagesInUse++;
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk,
+ chunkData,
+ NULL);
+
+ oh = (yaffs_ObjectHeader *) chunkData;
+
+ in = yaffs_FindObjectByNumber(dev,
+ tags.objectId);
+ if (in && in->variantType != oh->type) {
+ /* This should not happen, but somehow
+ * Wev'e ended up with an objectId that has been reused but not yet
+ * deleted, and worse still it has changed type. Delete the old object.
+ */
+
+ yaffs_DestroyObject(in);
+
+ in = 0;
+ }
+
+ in = yaffs_FindOrCreateObjectByNumber(dev,
+ tags.
+ objectId,
+ oh->type);
+
+ if(!in)
+ alloc_failed = 1;
+
+ if (in && oh->shadowsObject > 0) {
+ yaffs_HandleShadowedObject(dev,
+ oh->
+ shadowsObject,
+ 0);
+ }
+
+ if (in && in->valid) {
+ /* We have already filled this one. We have a duplicate and need to resolve it. */
+
+ unsigned existingSerial = in->serial;
+ unsigned newSerial = tags.serialNumber;
+
+ if (dev->isYaffs2 ||
+ ((existingSerial + 1) & 3) ==
+ newSerial) {
+ /* Use new one - destroy the exisiting one */
+ yaffs_DeleteChunk(dev,
+ in->chunkId,
+ 1, __LINE__);
+ in->valid = 0;
+ } else {
+ /* Use existing - destroy this one. */
+ yaffs_DeleteChunk(dev, chunk, 1,
+ __LINE__);
+ }
+ }
+
+ if (in && !in->valid &&
+ (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ tags.objectId == YAFFS_OBJECTID_LOSTNFOUND)) {
+ /* We only load some info, don't fiddle with directory structure */
+ in->valid = 1;
+ in->variantType = oh->type;
+
+ in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+ in->win_atime[0] = oh->win_atime[0];
+ in->win_ctime[0] = oh->win_ctime[0];
+ in->win_mtime[0] = oh->win_mtime[0];
+ in->win_atime[1] = oh->win_atime[1];
+ in->win_ctime[1] = oh->win_ctime[1];
+ in->win_mtime[1] = oh->win_mtime[1];
+#else
+ in->yst_uid = oh->yst_uid;
+ in->yst_gid = oh->yst_gid;
+ in->yst_atime = oh->yst_atime;
+ in->yst_mtime = oh->yst_mtime;
+ in->yst_ctime = oh->yst_ctime;
+ in->yst_rdev = oh->yst_rdev;
+#endif
+ in->chunkId = chunk;
+
+ } else if (in && !in->valid) {
+ /* we need to load this info */
+
+ in->valid = 1;
+ in->variantType = oh->type;
+
+ in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+ in->win_atime[0] = oh->win_atime[0];
+ in->win_ctime[0] = oh->win_ctime[0];
+ in->win_mtime[0] = oh->win_mtime[0];
+ in->win_atime[1] = oh->win_atime[1];
+ in->win_ctime[1] = oh->win_ctime[1];
+ in->win_mtime[1] = oh->win_mtime[1];
+#else
+ in->yst_uid = oh->yst_uid;
+ in->yst_gid = oh->yst_gid;
+ in->yst_atime = oh->yst_atime;
+ in->yst_mtime = oh->yst_mtime;
+ in->yst_ctime = oh->yst_ctime;
+ in->yst_rdev = oh->yst_rdev;
+#endif
+ in->chunkId = chunk;
+
+ yaffs_SetObjectName(in, oh->name);
+ in->dirty = 0;
+
+ /* directory stuff...
+ * hook up to parent
+ */
+
+ parent =
+ yaffs_FindOrCreateObjectByNumber
+ (dev, oh->parentObjectId,
+ YAFFS_OBJECT_TYPE_DIRECTORY);
+ if (parent->variantType ==
+ YAFFS_OBJECT_TYPE_UNKNOWN) {
+ /* Set up as a directory */
+ parent->variantType =
+ YAFFS_OBJECT_TYPE_DIRECTORY;
+ INIT_LIST_HEAD(&parent->variant.
+ directoryVariant.
+ children);
+ } else if (parent->variantType !=
+ YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ /* Hoosterman, another problem....
+ * We're trying to use a non-directory as a directory
+ */
+
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy: attempting to use non-directory as"
+ " a directory in scan. Put in lost+found."
+ TENDSTR)));
+ parent = dev->lostNFoundDir;
+ }
+
+ yaffs_AddObjectToDirectory(parent, in);
+
+ if (0 && (parent == dev->deletedDir ||
+ parent == dev->unlinkedDir)) {
+ in->deleted = 1; /* If it is unlinked at start up then it wants deleting */
+ dev->nDeletedFiles++;
+ }
+ /* Note re hardlinks.
+ * Since we might scan a hardlink before its equivalent object is scanned
+ * we put them all in a list.
+ * After scanning is complete, we should have all the objects, so we run through this
+ * list and fix up all the chains.
+ */
+
+ switch (in->variantType) {
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ /* Todo got a problem */
+ break;
+ case YAFFS_OBJECT_TYPE_FILE:
+ if (dev->isYaffs2
+ && oh->isShrink) {
+ /* Prune back the shrunken chunks */
+ yaffs_PruneResizedChunks
+ (in, oh->fileSize);
+ /* Mark the block as having a shrinkHeader */
+ bi->hasShrinkHeader = 1;
+ }
+
+ if (dev->useHeaderFileSize)
+
+ in->variant.fileVariant.
+ fileSize =
+ oh->fileSize;
+
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ in->variant.hardLinkVariant.
+ equivalentObjectId =
+ oh->equivalentObjectId;
+ in->hardLinks.next =
+ (struct list_head *)
+ hardList;
+ hardList = in;
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ in->variant.symLinkVariant.alias =
+ yaffs_CloneString(oh->alias);
+ if(!in->variant.symLinkVariant.alias)
+ alloc_failed = 1;
+ break;
+ }
+
+ if (parent == dev->deletedDir) {
+ yaffs_DestroyObject(in);
+ bi->hasShrinkHeader = 1;
+ }
+ }
+ }
+ }
+
+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ /* If we got this far while scanning, then the block is fully allocated.*/
+ state = YAFFS_BLOCK_STATE_FULL;
+ }
+
+ bi->blockState = state;
+
+ /* Now let's see if it was dirty */
+ if (bi->pagesInUse == 0 &&
+ !bi->hasShrinkHeader &&
+ bi->blockState == YAFFS_BLOCK_STATE_FULL) {
+ yaffs_BlockBecameDirty(dev, blk);
+ }
+
+ }
+
+ if (blockIndex) {
+ YFREE(blockIndex);
+ }
+
+
+ /* Ok, we've done all the scanning.
+ * Fix up the hard link chains.
+ * We should now have scanned all the objects, now it's time to add these
+ * hardlinks.
+ */
+
+ yaffs_HardlinkFixup(dev,hardList);
+
+ /* Handle the unlinked files. Since they were left in an unlinked state we should
+ * just delete them.
+ */
+ {
+ struct list_head *i;
+ struct list_head *n;
+
+ yaffs_Object *l;
+ /* Soft delete all the unlinked files */
+ list_for_each_safe(i, n,
+ &dev->unlinkedDir->variant.directoryVariant.
+ children) {
+ if (i) {
+ l = list_entry(i, yaffs_Object, siblings);
+ yaffs_DestroyObject(l);
+ }
+ }
+ }
+
+ yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+
+ if(alloc_failed){
+ return YAFFS_FAIL;
+ }
+
+ T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+
+
+ return YAFFS_OK;
+}
+
+static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in)
+{
+ __u8 *chunkData;
+ yaffs_ObjectHeader *oh;
+ yaffs_Device *dev = in->myDev;
+ yaffs_ExtendedTags tags;
+ int result;
+ int alloc_failed = 0;
+
+ if(!in)
+ return;
+
+#if 0
+ T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
+ in->objectId,
+ in->lazyLoaded ? "not yet" : "already"));
+#endif
+
+ if(in->lazyLoaded){
+ in->lazyLoaded = 0;
+ chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
+ oh = (yaffs_ObjectHeader *) chunkData;
+
+ in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+ in->win_atime[0] = oh->win_atime[0];
+ in->win_ctime[0] = oh->win_ctime[0];
+ in->win_mtime[0] = oh->win_mtime[0];
+ in->win_atime[1] = oh->win_atime[1];
+ in->win_ctime[1] = oh->win_ctime[1];
+ in->win_mtime[1] = oh->win_mtime[1];
+#else
+ in->yst_uid = oh->yst_uid;
+ in->yst_gid = oh->yst_gid;
+ in->yst_atime = oh->yst_atime;
+ in->yst_mtime = oh->yst_mtime;
+ in->yst_ctime = oh->yst_ctime;
+ in->yst_rdev = oh->yst_rdev;
+
+#endif
+ yaffs_SetObjectName(in, oh->name);
+
+ if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+ in->variant.symLinkVariant.alias =
+ yaffs_CloneString(oh->alias);
+ if(!in->variant.symLinkVariant.alias)
+ alloc_failed = 1; /* Not returned to caller */
+ }
+
+ yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
+ }
+}
+
+static int yaffs_ScanBackwards(yaffs_Device * dev)
+{
+ yaffs_ExtendedTags tags;
+ int blk;
+ int blockIterator;
+ int startIterator;
+ int endIterator;
+ int nBlocksToScan = 0;
+
+ int chunk;
+ int result;
+ int c;
+ int deleted;
+ yaffs_BlockState state;
+ yaffs_Object *hardList = NULL;
+ yaffs_BlockInfo *bi;
+ int sequenceNumber;
+ yaffs_ObjectHeader *oh;
+ yaffs_Object *in;
+ yaffs_Object *parent;
+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ int itsUnlinked;
+ __u8 *chunkData;
+
+ int fileSize;
+ int isShrink;
+ int foundChunksInBlock;
+ int equivalentObjectId;
+ int alloc_failed = 0;
+
+
+ yaffs_BlockIndex *blockIndex = NULL;
+ int altBlockIndex = 0;
+
+ if (!dev->isYaffs2) {
+ T(YAFFS_TRACE_SCAN,
+ (TSTR("yaffs_ScanBackwards is only for YAFFS2!" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ T(YAFFS_TRACE_SCAN,
+ (TSTR
+ ("yaffs_ScanBackwards starts intstartblk %d intendblk %d..."
+ TENDSTR), dev->internalStartBlock, dev->internalEndBlock));
+
+
+ dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+
+ blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+
+ if(!blockIndex) {
+ blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ altBlockIndex = 1;
+ }
+
+ if(!blockIndex) {
+ T(YAFFS_TRACE_SCAN,
+ (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ dev->blocksInCheckpoint = 0;
+
+ chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+ /* Scan all the blocks to determine their state */
+ for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ bi = yaffs_GetBlockInfo(dev, blk);
+ yaffs_ClearChunkBits(dev, blk);
+ bi->pagesInUse = 0;
+ bi->softDeletions = 0;
+
+ yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber);
+
+ bi->blockState = state;
+ bi->sequenceNumber = sequenceNumber;
+
+ if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
+
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ state, sequenceNumber));
+
+
+ if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
+ dev->blocksInCheckpoint++;
+
+ } else if (state == YAFFS_BLOCK_STATE_DEAD) {
+ T(YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("block %d is bad" TENDSTR), blk));
+ } else if (state == YAFFS_BLOCK_STATE_EMPTY) {
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("Block empty " TENDSTR)));
+ dev->nErasedBlocks++;
+ dev->nFreeChunks += dev->nChunksPerBlock;
+ } else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+
+ /* Determine the highest sequence number */
+ if (dev->isYaffs2 &&
+ sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+
+ blockIndex[nBlocksToScan].seq = sequenceNumber;
+ blockIndex[nBlocksToScan].block = blk;
+
+ nBlocksToScan++;
+
+ if (sequenceNumber >= dev->sequenceNumber) {
+ dev->sequenceNumber = sequenceNumber;
+ }
+ } else if (dev->isYaffs2) {
+ /* TODO: Nasty sequence number! */
+ T(YAFFS_TRACE_SCAN,
+ (TSTR
+ ("Block scanning block %d has bad sequence number %d"
+ TENDSTR), blk, sequenceNumber));
+
+ }
+ }
+ }
+
+ T(YAFFS_TRACE_SCAN,
+ (TSTR("%d blocks to be sorted..." TENDSTR), nBlocksToScan));
+
+
+
+ YYIELD();
+
+ /* Sort the blocks */
+#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ {
+ /* Use qsort now. */
+ yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
+ }
+#else
+ {
+ /* Dungy old bubble sort... */
+
+ yaffs_BlockIndex temp;
+ int i;
+ int j;
+
+ for (i = 0; i < nBlocksToScan; i++)
+ for (j = i + 1; j < nBlocksToScan; j++)
+ if (blockIndex[i].seq > blockIndex[j].seq) {
+ temp = blockIndex[j];
+ blockIndex[j] = blockIndex[i];
+ blockIndex[i] = temp;
+ }
+ }
+#endif
+
+ YYIELD();
+
+ T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+
+ /* Now scan the blocks looking at the data. */
+ startIterator = 0;
+ endIterator = nBlocksToScan - 1;
+ T(YAFFS_TRACE_SCAN_DEBUG,
+ (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+
+ /* For each block.... backwards */
+ for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+ blockIterator--) {
+ /* Cooperative multitasking! This loop can run for so
+ long that watchdog timers expire. */
+ YYIELD();
+
+ /* get the block to scan in the correct order */
+ blk = blockIndex[blockIterator].block;
+
+ bi = yaffs_GetBlockInfo(dev, blk);
+
+
+ state = bi->blockState;
+
+ deleted = 0;
+
+ /* For each chunk in each block that needs scanning.... */
+ foundChunksInBlock = 0;
+ for (c = dev->nChunksPerBlock - 1;
+ !alloc_failed && c >= 0 &&
+ (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ state == YAFFS_BLOCK_STATE_ALLOCATING); c--) {
+ /* Scan backwards...
+ * Read the tags and decide what to do
+ */
+
+ chunk = blk * dev->nChunksPerBlock + c;
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL,
+ &tags);
+
+ /* Let's have a good look at this chunk... */
+
+ if (!tags.chunkUsed) {
+ /* An unassigned chunk in the block.
+ * If there are used chunks after this one, then
+ * it is a chunk that was skipped due to failing the erased
+ * check. Just skip it so that it can be deleted.
+ * But, more typically, We get here when this is an unallocated
+ * chunk and his means that either the block is empty or
+ * this is the one being allocated from
+ */
+
+ if(foundChunksInBlock)
+ {
+ /* This is a chunk that was skipped due to failing the erased check */
+
+ } else if (c == 0) {
+ /* We're looking at the first chunk in the block so the block is unused */
+ state = YAFFS_BLOCK_STATE_EMPTY;
+ dev->nErasedBlocks++;
+ } else {
+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ state == YAFFS_BLOCK_STATE_ALLOCATING) {
+ if(dev->sequenceNumber == bi->sequenceNumber) {
+ /* this is the block being allocated from */
+
+ T(YAFFS_TRACE_SCAN,
+ (TSTR
+ (" Allocating from %d %d"
+ TENDSTR), blk, c));
+
+ state = YAFFS_BLOCK_STATE_ALLOCATING;
+ dev->allocationBlock = blk;
+ dev->allocationPage = c;
+ dev->allocationBlockFinder = blk;
+ }
+ else {
+ /* This is a partially written block that is not
+ * the current allocation block. This block must have
+ * had a write failure, so set up for retirement.
+ */
+
+ bi->needsRetiring = 1;
+ bi->gcPrioritise = 1;
+
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("Partially written block %d being set for retirement" TENDSTR),
+ blk));
+ }
+
+ }
+
+ }
+
+ dev->nFreeChunks++;
+
+ } else if (tags.chunkId > 0) {
+ /* chunkId > 0 so it is a data chunk... */
+ unsigned int endpos;
+ __u32 chunkBase =
+ (tags.chunkId - 1) * dev->nDataBytesPerChunk;
+
+ foundChunksInBlock = 1;
+
+
+ yaffs_SetChunkBit(dev, blk, c);
+ bi->pagesInUse++;
+
+ in = yaffs_FindOrCreateObjectByNumber(dev,
+ tags.
+ objectId,
+ YAFFS_OBJECT_TYPE_FILE);
+ if(!in){
+ /* Out of memory */
+ alloc_failed = 1;
+ }
+
+ if (in &&
+ in->variantType == YAFFS_OBJECT_TYPE_FILE
+ && chunkBase <
+ in->variant.fileVariant.shrinkSize) {
+ /* This has not been invalidated by a resize */
+ if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+ chunk, -1)){
+ alloc_failed = 1;
+ }
+
+ /* File size is calculated by looking at the data chunks if we have not
+ * seen an object header yet. Stop this practice once we find an object header.
+ */
+ endpos =
+ (tags.chunkId -
+ 1) * dev->nDataBytesPerChunk +
+ tags.byteCount;
+
+ if (!in->valid && /* have not got an object header yet */
+ in->variant.fileVariant.
+ scannedFileSize < endpos) {
+ in->variant.fileVariant.
+ scannedFileSize = endpos;
+ in->variant.fileVariant.
+ fileSize =
+ in->variant.fileVariant.
+ scannedFileSize;
+ }
+
+ } else if(in) {
+ /* This chunk has been invalidated by a resize, so delete */
+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+
+ }
+ } else {
+ /* chunkId == 0, so it is an ObjectHeader.
+ * Thus, we read in the object header and make the object
+ */
+ foundChunksInBlock = 1;
+
+ yaffs_SetChunkBit(dev, blk, c);
+ bi->pagesInUse++;
+
+ oh = NULL;
+ in = NULL;
+
+ if (tags.extraHeaderInfoAvailable) {
+ in = yaffs_FindOrCreateObjectByNumber
+ (dev, tags.objectId,
+ tags.extraObjectType);
+ }
+
+ if (!in ||
+#ifdef CONFIG_YAFFS_DISABLE_LAZY_LOAD
+ !in->valid ||
+#endif
+ tags.extraShadows ||
+ (!in->valid &&
+ (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+ ) {
+
+ /* If we don't have valid info then we need to read the chunk
+ * TODO In future we can probably defer reading the chunk and
+ * living with invalid data until needed.
+ */
+
+ result = yaffs_ReadChunkWithTagsFromNAND(dev,
+ chunk,
+ chunkData,
+ NULL);
+
+ oh = (yaffs_ObjectHeader *) chunkData;
+
+ if (!in)
+ in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
+
+ }
+
+ if (!in) {
+ /* TODO Hoosterman we have a problem! */
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy: Could not make object for object %d "
+ "at chunk %d during scan"
+ TENDSTR), tags.objectId, chunk));
+
+ }
+
+ if (in->valid) {
+ /* We have already filled this one.
+ * We have a duplicate that will be discarded, but
+ * we first have to suck out resize info if it is a file.
+ */
+
+ if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ ((oh &&
+ oh-> type == YAFFS_OBJECT_TYPE_FILE)||
+ (tags.extraHeaderInfoAvailable &&
+ tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+ ) {
+ __u32 thisSize =
+ (oh) ? oh->fileSize : tags.
+ extraFileLength;
+ __u32 parentObjectId =
+ (oh) ? oh->
+ parentObjectId : tags.
+ extraParentObjectId;
+ unsigned isShrink =
+ (oh) ? oh->isShrink : tags.
+ extraIsShrinkHeader;
+
+ /* If it is deleted (unlinked at start also means deleted)
+ * we treat the file size as being zeroed at this point.
+ */
+ if (parentObjectId ==
+ YAFFS_OBJECTID_DELETED
+ || parentObjectId ==
+ YAFFS_OBJECTID_UNLINKED) {
+ thisSize = 0;
+ isShrink = 1;
+ }
+
+ if (isShrink &&
+ in->variant.fileVariant.
+ shrinkSize > thisSize) {
+ in->variant.fileVariant.
+ shrinkSize =
+ thisSize;
+ }
+
+ if (isShrink) {
+ bi->hasShrinkHeader = 1;
+ }
+
+ }
+ /* Use existing - destroy this one. */
+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+
+ }
+
+ if (!in->valid &&
+ (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ tags.objectId ==
+ YAFFS_OBJECTID_LOSTNFOUND)) {
+ /* We only load some info, don't fiddle with directory structure */
+ in->valid = 1;
+
+ if(oh) {
+ in->variantType = oh->type;
+
+ in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+ in->win_atime[0] = oh->win_atime[0];
+ in->win_ctime[0] = oh->win_ctime[0];
+ in->win_mtime[0] = oh->win_mtime[0];
+ in->win_atime[1] = oh->win_atime[1];
+ in->win_ctime[1] = oh->win_ctime[1];
+ in->win_mtime[1] = oh->win_mtime[1];
+#else
+ in->yst_uid = oh->yst_uid;
+ in->yst_gid = oh->yst_gid;
+ in->yst_atime = oh->yst_atime;
+ in->yst_mtime = oh->yst_mtime;
+ in->yst_ctime = oh->yst_ctime;
+ in->yst_rdev = oh->yst_rdev;
+
+#endif
+ } else {
+ in->variantType = tags.extraObjectType;
+ in->lazyLoaded = 1;
+ }
+
+ in->chunkId = chunk;
+
+ } else if (!in->valid) {
+ /* we need to load this info */
+
+ in->valid = 1;
+ in->chunkId = chunk;
+
+ if(oh) {
+ in->variantType = oh->type;
+
+ in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+ in->win_atime[0] = oh->win_atime[0];
+ in->win_ctime[0] = oh->win_ctime[0];
+ in->win_mtime[0] = oh->win_mtime[0];
+ in->win_atime[1] = oh->win_atime[1];
+ in->win_ctime[1] = oh->win_ctime[1];
+ in->win_mtime[1] = oh->win_mtime[1];
+#else
+ in->yst_uid = oh->yst_uid;
+ in->yst_gid = oh->yst_gid;
+ in->yst_atime = oh->yst_atime;
+ in->yst_mtime = oh->yst_mtime;
+ in->yst_ctime = oh->yst_ctime;
+ in->yst_rdev = oh->yst_rdev;
+#endif
+
+ if (oh->shadowsObject > 0)
+ yaffs_HandleShadowedObject(dev,
+ oh->
+ shadowsObject,
+ 1);
+
+
+ yaffs_SetObjectName(in, oh->name);
+ parent =
+ yaffs_FindOrCreateObjectByNumber
+ (dev, oh->parentObjectId,
+ YAFFS_OBJECT_TYPE_DIRECTORY);
+
+ fileSize = oh->fileSize;
+ isShrink = oh->isShrink;
+ equivalentObjectId = oh->equivalentObjectId;
+
+ }
+ else {
+ in->variantType = tags.extraObjectType;
+ parent =
+ yaffs_FindOrCreateObjectByNumber
+ (dev, tags.extraParentObjectId,
+ YAFFS_OBJECT_TYPE_DIRECTORY);
+ fileSize = tags.extraFileLength;
+ isShrink = tags.extraIsShrinkHeader;
+ equivalentObjectId = tags.extraEquivalentObjectId;
+ in->lazyLoaded = 1;
+
+ }
+ in->dirty = 0;
+
+ /* directory stuff...
+ * hook up to parent
+ */
+
+ if (parent->variantType ==
+ YAFFS_OBJECT_TYPE_UNKNOWN) {
+ /* Set up as a directory */
+ parent->variantType =
+ YAFFS_OBJECT_TYPE_DIRECTORY;
+ INIT_LIST_HEAD(&parent->variant.
+ directoryVariant.
+ children);
+ } else if (parent->variantType !=
+ YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ /* Hoosterman, another problem....
+ * We're trying to use a non-directory as a directory
+ */
+
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy: attempting to use non-directory as"
+ " a directory in scan. Put in lost+found."
+ TENDSTR)));
+ parent = dev->lostNFoundDir;
+ }
+
+ yaffs_AddObjectToDirectory(parent, in);
+
+ itsUnlinked = (parent == dev->deletedDir) ||
+ (parent == dev->unlinkedDir);
+
+ if (isShrink) {
+ /* Mark the block as having a shrinkHeader */
+ bi->hasShrinkHeader = 1;
+ }
+
+ /* Note re hardlinks.
+ * Since we might scan a hardlink before its equivalent object is scanned
+ * we put them all in a list.
+ * After scanning is complete, we should have all the objects, so we run
+ * through this list and fix up all the chains.
+ */
+
+ switch (in->variantType) {
+ case YAFFS_OBJECT_TYPE_UNKNOWN:
+ /* Todo got a problem */
+ break;
+ case YAFFS_OBJECT_TYPE_FILE:
+
+ if (in->variant.fileVariant.
+ scannedFileSize < fileSize) {
+ /* This covers the case where the file size is greater
+ * than where the data is
+ * This will happen if the file is resized to be larger
+ * than its current data extents.
+ */
+ in->variant.fileVariant.fileSize = fileSize;
+ in->variant.fileVariant.scannedFileSize =
+ in->variant.fileVariant.fileSize;
+ }
+
+ if (isShrink &&
+ in->variant.fileVariant.shrinkSize > fileSize) {
+ in->variant.fileVariant.shrinkSize = fileSize;
+ }
+
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ if(!itsUnlinked) {
+ in->variant.hardLinkVariant.equivalentObjectId =
+ equivalentObjectId;
+ in->hardLinks.next =
+ (struct list_head *) hardList;
+ hardList = in;
+ }
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ /* Do nothing */
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ if(oh){
+ in->variant.symLinkVariant.alias =
+ yaffs_CloneString(oh->
+ alias);
+ if(!in->variant.symLinkVariant.alias)
+ alloc_failed = 1;
+ }
+ break;
+ }
+
+ }
+
+ }
+
+ } /* End of scanning for each chunk */
+
+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ /* If we got this far while scanning, then the block is fully allocated. */
+ state = YAFFS_BLOCK_STATE_FULL;
+ }
+
+ bi->blockState = state;
+
+ /* Now let's see if it was dirty */
+ if (bi->pagesInUse == 0 &&
+ !bi->hasShrinkHeader &&
+ bi->blockState == YAFFS_BLOCK_STATE_FULL) {
+ yaffs_BlockBecameDirty(dev, blk);
+ }
+
+ }
+
+ if (altBlockIndex)
+ YFREE_ALT(blockIndex);
+ else
+ YFREE(blockIndex);
+
+ /* Ok, we've done all the scanning.
+ * Fix up the hard link chains.
+ * We should now have scanned all the objects, now it's time to add these
+ * hardlinks.
+ */
+ yaffs_HardlinkFixup(dev,hardList);
+
+
+ /*
+ * Sort out state of unlinked and deleted objects.
+ */
+ {
+ struct list_head *i;
+ struct list_head *n;
+
+ yaffs_Object *l;
+
+ /* Soft delete all the unlinked files */
+ list_for_each_safe(i, n,
+ &dev->unlinkedDir->variant.directoryVariant.
+ children) {
+ if (i) {
+ l = list_entry(i, yaffs_Object, siblings);
+ yaffs_DestroyObject(l);
+ }
+ }
+
+ /* Soft delete all the deletedDir files */
+ list_for_each_safe(i, n,
+ &dev->deletedDir->variant.directoryVariant.
+ children) {
+ if (i) {
+ l = list_entry(i, yaffs_Object, siblings);
+ yaffs_DestroyObject(l);
+
+ }
+ }
+ }
+
+ yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+
+ if(alloc_failed){
+ return YAFFS_FAIL;
+ }
+
+ T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+
+ return YAFFS_OK;
+}
+
+/*------------------------------ Directory Functions ----------------------------- */
+
+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
+{
+ yaffs_Device *dev = obj->myDev;
+
+ if(dev && dev->removeObjectCallback)
+ dev->removeObjectCallback(obj);
+
+ list_del_init(&obj->siblings);
+ obj->parent = NULL;
+}
+
+
+static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+ yaffs_Object * obj)
+{
+
+ if (!directory) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: Trying to add an object to a null pointer directory"
+ TENDSTR)));
+ YBUG();
+ }
+ if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: Trying to add an object to a non-directory"
+ TENDSTR)));
+ YBUG();
+ }
+
+ if (obj->siblings.prev == NULL) {
+ /* Not initialised */
+ INIT_LIST_HEAD(&obj->siblings);
+
+ } else if (!list_empty(&obj->siblings)) {
+ /* If it is holed up somewhere else, un hook it */
+ yaffs_RemoveObjectFromDirectory(obj);
+ }
+ /* Now add it */
+ list_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ obj->parent = directory;
+
+ if (directory == obj->myDev->unlinkedDir
+ || directory == obj->myDev->deletedDir) {
+ obj->unlinked = 1;
+ obj->myDev->nUnlinkedFiles++;
+ obj->renameAllowed = 0;
+ }
+}
+
+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+ const YCHAR * name)
+{
+ int sum;
+
+ struct list_head *i;
+ YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+
+ yaffs_Object *l;
+
+ if (!name) {
+ return NULL;
+ }
+
+ if (!directory) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ TENDSTR)));
+ YBUG();
+ }
+ if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ YBUG();
+ }
+
+ sum = yaffs_CalcNameSum(name);
+
+ list_for_each(i, &directory->variant.directoryVariant.children) {
+ if (i) {
+ l = list_entry(i, yaffs_Object, siblings);
+
+ yaffs_CheckObjectDetailsLoaded(l);
+
+ /* Special case for lost-n-found */
+ if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
+ return l;
+ }
+ } else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+ {
+ /* LostnFound cunk called Objxxx
+ * Do a real check
+ */
+ yaffs_GetObjectName(l, buffer,
+ YAFFS_MAX_NAME_LENGTH);
+ if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
+ return l;
+ }
+
+ }
+ }
+ }
+
+ return NULL;
+}
+
+
+#if 0
+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+ int (*fn) (yaffs_Object *))
+{
+ struct list_head *i;
+ yaffs_Object *l;
+
+ if (!theDir) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ TENDSTR)));
+ YBUG();
+ }
+ if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ YBUG();
+ }
+
+ list_for_each(i, &theDir->variant.directoryVariant.children) {
+ if (i) {
+ l = list_entry(i, yaffs_Object, siblings);
+ if (l && !fn(l)) {
+ return YAFFS_FAIL;
+ }
+ }
+ }
+
+ return YAFFS_OK;
+
+}
+#endif
+
+/* GetEquivalentObject dereferences any hard links to get to the
+ * actual object.
+ */
+
+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
+{
+ if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ /* We want the object id of the equivalent object, not this one */
+ obj = obj->variant.hardLinkVariant.equivalentObject;
+ yaffs_CheckObjectDetailsLoaded(obj);
+ }
+ return obj;
+
+}
+
+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
+{
+ memset(name, 0, buffSize * sizeof(YCHAR));
+
+ yaffs_CheckObjectDetailsLoaded(obj);
+
+ if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+ } else if (obj->chunkId <= 0) {
+ YCHAR locName[20];
+ /* make up a name */
+ yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+ obj->objectId);
+ yaffs_strncpy(name, locName, buffSize - 1);
+
+ }
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+ else if (obj->shortName[0]) {
+ yaffs_strcpy(name, obj->shortName);
+ }
+#endif
+ else {
+ int result;
+ __u8 *buffer = yaffs_GetTempBuffer(obj->myDev, __LINE__);
+
+ yaffs_ObjectHeader *oh = (yaffs_ObjectHeader *) buffer;
+
+ memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+
+ if (obj->chunkId >= 0) {
+ result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+ obj->chunkId, buffer,
+ NULL);
+ }
+ yaffs_strncpy(name, oh->name, buffSize - 1);
+
+ yaffs_ReleaseTempBuffer(obj->myDev, buffer, __LINE__);
+ }
+
+ return yaffs_strlen(name);
+}
+
+int yaffs_GetObjectFileLength(yaffs_Object * obj)
+{
+
+ /* Dereference any hard linking */
+ obj = yaffs_GetEquivalentObject(obj);
+
+ if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ return obj->variant.fileVariant.fileSize;
+ }
+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
+ return yaffs_strlen(obj->variant.symLinkVariant.alias);
+ } else {
+ /* Only a directory should drop through to here */
+ return obj->myDev->nDataBytesPerChunk;
+ }
+}
+
+int yaffs_GetObjectLinkCount(yaffs_Object * obj)
+{
+ int count = 0;
+ struct list_head *i;
+
+ if (!obj->unlinked) {
+ count++; /* the object itself */
+ }
+ list_for_each(i, &obj->hardLinks) {
+ count++; /* add the hard links; */
+ }
+ return count;
+
+}
+
+int yaffs_GetObjectInode(yaffs_Object * obj)
+{
+ obj = yaffs_GetEquivalentObject(obj);
+
+ return obj->objectId;
+}
+
+unsigned yaffs_GetObjectType(yaffs_Object * obj)
+{
+ obj = yaffs_GetEquivalentObject(obj);
+
+ switch (obj->variantType) {
+ case YAFFS_OBJECT_TYPE_FILE:
+ return DT_REG;
+ break;
+ case YAFFS_OBJECT_TYPE_DIRECTORY:
+ return DT_DIR;
+ break;
+ case YAFFS_OBJECT_TYPE_SYMLINK:
+ return DT_LNK;
+ break;
+ case YAFFS_OBJECT_TYPE_HARDLINK:
+ return DT_REG;
+ break;
+ case YAFFS_OBJECT_TYPE_SPECIAL:
+ if (S_ISFIFO(obj->yst_mode))
+ return DT_FIFO;
+ if (S_ISCHR(obj->yst_mode))
+ return DT_CHR;
+ if (S_ISBLK(obj->yst_mode))
+ return DT_BLK;
+ if (S_ISSOCK(obj->yst_mode))
+ return DT_SOCK;
+ default:
+ return DT_REG;
+ break;
+ }
+}
+
+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
+{
+ obj = yaffs_GetEquivalentObject(obj);
+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
+ return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+ } else {
+ return yaffs_CloneString(_Y(""));
+ }
+}
+
+#ifndef CONFIG_YAFFS_WINCE
+
+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
+{
+ unsigned int valid = attr->ia_valid;
+
+ if (valid & ATTR_MODE)
+ obj->yst_mode = attr->ia_mode;
+ if (valid & ATTR_UID)
+ obj->yst_uid = attr->ia_uid;
+ if (valid & ATTR_GID)
+ obj->yst_gid = attr->ia_gid;
+
+ if (valid & ATTR_ATIME)
+ obj->yst_atime = Y_TIME_CONVERT(attr->ia_atime);
+ if (valid & ATTR_CTIME)
+ obj->yst_ctime = Y_TIME_CONVERT(attr->ia_ctime);
+ if (valid & ATTR_MTIME)
+ obj->yst_mtime = Y_TIME_CONVERT(attr->ia_mtime);
+
+ if (valid & ATTR_SIZE)
+ yaffs_ResizeFile(obj, attr->ia_size);
+
+ yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
+
+ return YAFFS_OK;
+
+}
+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
+{
+ unsigned int valid = 0;
+
+ attr->ia_mode = obj->yst_mode;
+ valid |= ATTR_MODE;
+ attr->ia_uid = obj->yst_uid;
+ valid |= ATTR_UID;
+ attr->ia_gid = obj->yst_gid;
+ valid |= ATTR_GID;
+
+ Y_TIME_CONVERT(attr->ia_atime) = obj->yst_atime;
+ valid |= ATTR_ATIME;
+ Y_TIME_CONVERT(attr->ia_ctime) = obj->yst_ctime;
+ valid |= ATTR_CTIME;
+ Y_TIME_CONVERT(attr->ia_mtime) = obj->yst_mtime;
+ valid |= ATTR_MTIME;
+
+ attr->ia_size = yaffs_GetFileSize(obj);
+ valid |= ATTR_SIZE;
+
+ attr->ia_valid = valid;
+
+ return YAFFS_OK;
+
+}
+
+#endif
+
+#if 0
+int yaffs_DumpObject(yaffs_Object * obj)
+{
+ YCHAR name[257];
+
+ yaffs_GetObjectName(obj, name, 256);
+
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ " chunk %d type %d size %d\n"
+ TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+ obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
+ yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+
+ return YAFFS_OK;
+}
+#endif
+
+/*---------------------------- Initialisation code -------------------------------------- */
+
+static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
+{
+
+ /* Common functions, gotta have */
+ if (!dev->eraseBlockInNAND || !dev->initialiseNAND)
+ return 0;
+
+#ifdef CONFIG_YAFFS_YAFFS2
+
+ /* Can use the "with tags" style interface for yaffs1 or yaffs2 */
+ if (dev->writeChunkWithTagsToNAND &&
+ dev->readChunkWithTagsFromNAND &&
+ !dev->writeChunkToNAND &&
+ !dev->readChunkFromNAND &&
+ dev->markNANDBlockBad && dev->queryNANDBlock)
+ return 1;
+#endif
+
+ /* Can use the "spare" style interface for yaffs1 */
+ if (!dev->isYaffs2 &&
+ !dev->writeChunkWithTagsToNAND &&
+ !dev->readChunkWithTagsFromNAND &&
+ dev->writeChunkToNAND &&
+ dev->readChunkFromNAND &&
+ !dev->markNANDBlockBad && !dev->queryNANDBlock)
+ return 1;
+
+ return 0; /* bad */
+}
+
+
+static int yaffs_CreateInitialDirectories(yaffs_Device *dev)
+{
+ /* Initialise the unlinked, deleted, root and lost and found directories */
+
+ dev->lostNFoundDir = dev->rootDir = NULL;
+ dev->unlinkedDir = dev->deletedDir = NULL;
+
+ dev->unlinkedDir =
+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_UNLINKED, S_IFDIR);
+
+ dev->deletedDir =
+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_DELETED, S_IFDIR);
+
+ dev->rootDir =
+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_ROOT,
+ YAFFS_ROOT_MODE | S_IFDIR);
+ dev->lostNFoundDir =
+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+
+ if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
+ yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ return YAFFS_OK;
+ }
+
+ return YAFFS_FAIL;
+}
+
+int yaffs_GutsInitialise(yaffs_Device * dev)
+{
+ int init_failed = 0;
+ unsigned x;
+ int bits;
+
+ T(YAFFS_TRACE_TRACING, (TSTR("yaffs: yaffs_GutsInitialise()" TENDSTR)));
+
+ /* Check stuff that must be set */
+
+ if (!dev) {
+ T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Need a device" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ dev->internalStartBlock = dev->startBlock;
+ dev->internalEndBlock = dev->endBlock;
+ dev->blockOffset = 0;
+ dev->chunkOffset = 0;
+ dev->nFreeChunks = 0;
+
+ if (dev->startBlock == 0) {
+ dev->internalStartBlock = dev->startBlock + 1;
+ dev->internalEndBlock = dev->endBlock + 1;
+ dev->blockOffset = 1;
+ dev->chunkOffset = dev->nChunksPerBlock;
+ }
+
+ /* Check geometry parameters. */
+
+ if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+ (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
+ dev->nChunksPerBlock < 2 ||
+ dev->nReservedBlocks < 2 ||
+ dev->internalStartBlock <= 0 ||
+ dev->internalEndBlock <= 0 ||
+ dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2) // otherwise it is too small
+ ) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+ TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
+ return YAFFS_FAIL;
+ }
+
+ if (yaffs_InitialiseNAND(dev) != YAFFS_OK) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: InitialiseNAND failed" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ /* Got the right mix of functions? */
+ if (!yaffs_CheckDevFunctions(dev)) {
+ /* Function missing */
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR
+ ("yaffs: device function(s) missing or wrong\n" TENDSTR)));
+
+ return YAFFS_FAIL;
+ }
+
+ /* This is really a compilation check. */
+ if (!yaffs_CheckStructures()) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs_CheckStructures failed\n" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ if (dev->isMounted) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: device already mounted\n" TENDSTR)));
+ return YAFFS_FAIL;
+ }
+
+ /* Finished with most checks. One or two more checks happen later on too. */
+
+ dev->isMounted = 1;
+
+
+
+ /* OK now calculate a few things for the device */
+
+ /*
+ * Calculate all the chunk size manipulation numbers:
+ */
+ /* Start off assuming it is a power of 2 */
+ dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+ dev->chunkMask = (1<<dev->chunkShift) - 1;
+
+ if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+ /* Yes it is a power of 2, disable crumbs */
+ dev->crumbMask = 0;
+ dev->crumbShift = 0;
+ dev->crumbsPerChunk = 0;
+ } else {
+ /* Not a power of 2, use crumbs instead */
+ dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+ dev->crumbMask = (1<<dev->crumbShift)-1;
+ dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+ dev->chunkShift = 0;
+ dev->chunkMask = 0;
+ }
+
+
+ /*
+ * Calculate chunkGroupBits.
+ * We need to find the next power of 2 > than internalEndBlock
+ */
+
+ x = dev->nChunksPerBlock * (dev->internalEndBlock + 1);
+
+ bits = ShiftsGE(x);
+
+ /* Set up tnode width if wide tnodes are enabled. */
+ if(!dev->wideTnodesDisabled){
+ /* bits must be even so that we end up with 32-bit words */
+ if(bits & 1)
+ bits++;
+ if(bits < 16)
+ dev->tnodeWidth = 16;
+ else
+ dev->tnodeWidth = bits;
+ }
+ else
+ dev->tnodeWidth = 16;
+
+ dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+
+ /* Level0 Tnodes are 16 bits or wider (if wide tnodes are enabled),
+ * so if the bitwidth of the
+ * chunk range we're using is greater than 16 we need
+ * to figure out chunk shift and chunkGroupSize
+ */
+
+ if (bits <= dev->tnodeWidth)
+ dev->chunkGroupBits = 0;
+ else
+ dev->chunkGroupBits = bits - dev->tnodeWidth;
+
+
+ dev->chunkGroupSize = 1 << dev->chunkGroupBits;
+
+ if (dev->nChunksPerBlock < dev->chunkGroupSize) {
+ /* We have a problem because the soft delete won't work if
+ * the chunk group size > chunks per block.
+ * This can be remedied by using larger "virtual blocks".
+ */
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: chunk group too large\n" TENDSTR)));
+
+ return YAFFS_FAIL;
+ }
+
+ /* OK, we've finished verifying the device, lets continue with initialisation */
+
+ /* More device initialisation */
+ dev->garbageCollections = 0;
+ dev->passiveGarbageCollections = 0;
+ dev->currentDirtyChecker = 0;
+ dev->bufferedBlock = -1;
+ dev->doingBufferedBlockRewrite = 0;
+ dev->nDeletedFiles = 0;
+ dev->nBackgroundDeletions = 0;
+ dev->nUnlinkedFiles = 0;
+ dev->eccFixed = 0;
+ dev->eccUnfixed = 0;
+ dev->tagsEccFixed = 0;
+ dev->tagsEccUnfixed = 0;
+ dev->nErasureFailures = 0;
+ dev->nErasedBlocks = 0;
+ dev->isDoingGC = 0;
+ dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+
+ /* Initialise temporary buffers and caches. */
+ if(!yaffs_InitialiseTempBuffers(dev))
+ init_failed = 1;
+
+ dev->srCache = NULL;
+ dev->gcCleanupList = NULL;
+
+
+ if (!init_failed &&
+ dev->nShortOpCaches > 0) {
+ int i;
+ __u8 *buf;
+ int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+
+ if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
+ dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+ }
+
+ buf = dev->srCache = YMALLOC(srCacheBytes);
+
+ if(dev->srCache)
+ memset(dev->srCache,0,srCacheBytes);
+
+ for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ dev->srCache[i].object = NULL;
+ dev->srCache[i].lastUse = 0;
+ dev->srCache[i].dirty = 0;
+ dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
+ }
+ if(!buf)
+ init_failed = 1;
+
+ dev->srLastUse = 0;
+ }
+
+ dev->cacheHits = 0;
+
+ if(!init_failed){
+ dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+ if(!dev->gcCleanupList)
+ init_failed = 1;
+ }
+
+ if (dev->isYaffs2) {
+ dev->useHeaderFileSize = 1;
+ }
+ if(!init_failed && !yaffs_InitialiseBlocks(dev))
+ init_failed = 1;
+
+ yaffs_InitialiseTnodes(dev);
+ yaffs_InitialiseObjects(dev);
+
+ if(!init_failed && !yaffs_CreateInitialDirectories(dev))
+ init_failed = 1;
+
+
+ if(!init_failed){
+ /* Now scan the flash. */
+ if (dev->isYaffs2) {
+ if(yaffs_CheckpointRestore(dev)) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ } else {
+
+ /* Clean up the mess caused by an aborted checkpoint load
+ * and scan backwards.
+ */
+ yaffs_DeinitialiseBlocks(dev);
+ yaffs_DeinitialiseTnodes(dev);
+ yaffs_DeinitialiseObjects(dev);
+
+
+ dev->nErasedBlocks = 0;
+ dev->nFreeChunks = 0;
+ dev->allocationBlock = -1;
+ dev->allocationPage = -1;
+ dev->nDeletedFiles = 0;
+ dev->nUnlinkedFiles = 0;
+ dev->nBackgroundDeletions = 0;
+ dev->oldestDirtySequence = 0;
+
+ if(!init_failed && !yaffs_InitialiseBlocks(dev))
+ init_failed = 1;
+
+ yaffs_InitialiseTnodes(dev);
+ yaffs_InitialiseObjects(dev);
+
+ if(!init_failed && !yaffs_CreateInitialDirectories(dev))
+ init_failed = 1;
+
+ if(!init_failed && !yaffs_ScanBackwards(dev))
+ init_failed = 1;
+ }
+ }else
+ if(!yaffs_Scan(dev))
+ init_failed = 1;
+ }
+
+ if(init_failed){
+ /* Clean up the mess */
+ T(YAFFS_TRACE_TRACING,
+ (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+
+ yaffs_Deinitialise(dev);
+ return YAFFS_FAIL;
+ }
+
+ /* Zero out stats */
+ dev->nPageReads = 0;
+ dev->nPageWrites = 0;
+ dev->nBlockErasures = 0;
+ dev->nGCCopies = 0;
+ dev->nRetriedWrites = 0;
+
+ dev->nRetiredBlocks = 0;
+
+ yaffs_VerifyFreeChunks(dev);
+ yaffs_VerifyBlocks(dev);
+
+
+ T(YAFFS_TRACE_TRACING,
+ (TSTR("yaffs: yaffs_GutsInitialise() done.\n" TENDSTR)));
+ return YAFFS_OK;
+
+}
+
+void yaffs_Deinitialise(yaffs_Device * dev)
+{
+ if (dev->isMounted) {
+ int i;
+
+ yaffs_DeinitialiseBlocks(dev);
+ yaffs_DeinitialiseTnodes(dev);
+ yaffs_DeinitialiseObjects(dev);
+ if (dev->nShortOpCaches > 0 &&
+ dev->srCache) {
+
+ for (i = 0; i < dev->nShortOpCaches; i++) {
+ if(dev->srCache[i].data)
+ YFREE(dev->srCache[i].data);
+ dev->srCache[i].data = NULL;
+ }
+
+ YFREE(dev->srCache);
+ dev->srCache = NULL;
+ }
+
+ YFREE(dev->gcCleanupList);
+
+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ YFREE(dev->tempBuffer[i].buffer);
+ }
+
+ dev->isMounted = 0;
+ }
+
+}
+
+static int yaffs_CountFreeChunks(yaffs_Device * dev)
+{
+ int nFree;
+ int b;
+
+ yaffs_BlockInfo *blk;
+
+ for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+ b++) {
+ blk = yaffs_GetBlockInfo(dev, b);
+
+ switch (blk->blockState) {
+ case YAFFS_BLOCK_STATE_EMPTY:
+ case YAFFS_BLOCK_STATE_ALLOCATING:
+ case YAFFS_BLOCK_STATE_COLLECTING:
+ case YAFFS_BLOCK_STATE_FULL:
+ nFree +=
+ (dev->nChunksPerBlock - blk->pagesInUse +
+ blk->softDeletions);
+ break;
+ default:
+ break;
+ }
+
+ }
+
+ return nFree;
+}
+
+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
+{
+ /* This is what we report to the outside world */
+
+ int nFree;
+ int nDirtyCacheChunks;
+ int blocksForCheckpoint;
+
+#if 1
+ nFree = dev->nFreeChunks;
+#else
+ nFree = yaffs_CountFreeChunks(dev);
+#endif
+
+ nFree += dev->nDeletedFiles;
+
+ /* Now count the number of dirty chunks in the cache and subtract those */
+
+ {
+ int i;
+ for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+ if (dev->srCache[i].dirty)
+ nDirtyCacheChunks++;
+ }
+ }
+
+ nFree -= nDirtyCacheChunks;
+
+ nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+
+ /* Now we figure out how much to reserve for the checkpoint and report that... */
+ blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+ if(blocksForCheckpoint < 0)
+ blocksForCheckpoint = 0;
+
+ nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+
+ if (nFree < 0)
+ nFree = 0;
+
+ return nFree;
+
+}
+
+static int yaffs_freeVerificationFailures;
+
+static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
+{
+ int counted;
+ int difference;
+
+ if(yaffs_SkipVerification(dev))
+ return;
+
+ counted = yaffs_CountFreeChunks(dev);
+
+ difference = dev->nFreeChunks - counted;
+
+ if (difference) {
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("Freechunks verification failure %d %d %d" TENDSTR),
+ dev->nFreeChunks, counted, difference));
+ yaffs_freeVerificationFailures++;
+ }
+}
+
+/*---------------------------------------- YAFFS test code ----------------------*/
+
+#define yaffs_CheckStruct(structure,syze, name) \
+ if(sizeof(structure) != syze) \
+ { \
+ T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+ name,syze,sizeof(structure))); \
+ return YAFFS_FAIL; \
+ }
+
+static int yaffs_CheckStructures(void)
+{
+/* yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+/* yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+/* yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
+#ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
+#endif
+ yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+
+ return YAFFS_OK;
+}
diff --git a/fs/yaffs2/yaffs_guts.h b/fs/yaffs2/yaffs_guts.h
new file mode 100644
index 0000000..ecf701f
--- /dev/null
+++ b/fs/yaffs2/yaffs_guts.h
@@ -0,0 +1,908 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_GUTS_H__
+#define __YAFFS_GUTS_H__
+
+#include "devextras.h"
+#include "yportenv.h"
+
+#define YAFFS_OK 1
+#define YAFFS_FAIL 0
+
+/* Give us a Y=0x59,
+ * Give us an A=0x41,
+ * Give us an FF=0xFF
+ * Give us an S=0x53
+ * And what have we got...
+ */
+#define YAFFS_MAGIC 0x5941FF53
+
+#define YAFFS_NTNODES_LEVEL0 16
+#define YAFFS_TNODES_LEVEL0_BITS 4
+#define YAFFS_TNODES_LEVEL0_MASK 0xf
+
+#define YAFFS_NTNODES_INTERNAL (YAFFS_NTNODES_LEVEL0 / 2)
+#define YAFFS_TNODES_INTERNAL_BITS (YAFFS_TNODES_LEVEL0_BITS - 1)
+#define YAFFS_TNODES_INTERNAL_MASK 0x7
+#define YAFFS_TNODES_MAX_LEVEL 6
+
+#ifndef CONFIG_YAFFS_NO_YAFFS1
+#define YAFFS_BYTES_PER_SPARE 16
+#define YAFFS_BYTES_PER_CHUNK 512
+#define YAFFS_CHUNK_SIZE_SHIFT 9
+#define YAFFS_CHUNKS_PER_BLOCK 32
+#define YAFFS_BYTES_PER_BLOCK (YAFFS_CHUNKS_PER_BLOCK*YAFFS_BYTES_PER_CHUNK)
+#endif
+
+#define YAFFS_MIN_YAFFS2_CHUNK_SIZE 1024
+#define YAFFS_MIN_YAFFS2_SPARE_SIZE 32
+
+#define YAFFS_MAX_CHUNK_ID 0x000FFFFF
+
+#define YAFFS_UNUSED_OBJECT_ID 0x0003FFFF
+
+#define YAFFS_ALLOCATION_NOBJECTS 100
+#define YAFFS_ALLOCATION_NTNODES 100
+#define YAFFS_ALLOCATION_NLINKS 100
+
+#define YAFFS_NOBJECT_BUCKETS 256
+
+
+#define YAFFS_OBJECT_SPACE 0x40000
+
+#define YAFFS_CHECKPOINT_VERSION 3
+
+#ifdef CONFIG_YAFFS_UNICODE
+#define YAFFS_MAX_NAME_LENGTH 127
+#define YAFFS_MAX_ALIAS_LENGTH 79
+#else
+#define YAFFS_MAX_NAME_LENGTH 255
+#define YAFFS_MAX_ALIAS_LENGTH 159
+#endif
+
+#define YAFFS_SHORT_NAME_LENGTH 15
+
+/* Some special object ids for pseudo objects */
+#define YAFFS_OBJECTID_ROOT 1
+#define YAFFS_OBJECTID_LOSTNFOUND 2
+#define YAFFS_OBJECTID_UNLINKED 3
+#define YAFFS_OBJECTID_DELETED 4
+
+/* Sseudo object ids for checkpointing */
+#define YAFFS_OBJECTID_SB_HEADER 0x10
+#define YAFFS_OBJECTID_CHECKPOINT_DATA 0x20
+#define YAFFS_SEQUENCE_CHECKPOINT_DATA 0x21
+
+/* */
+
+#define YAFFS_MAX_SHORT_OP_CACHES 20
+
+#define YAFFS_N_TEMP_BUFFERS 4
+
+/* We limit the number attempts at sucessfully saving a chunk of data.
+ * Small-page devices have 32 pages per block; large-page devices have 64.
+ * Default to something in the order of 5 to 10 blocks worth of chunks.
+ */
+#define YAFFS_WR_ATTEMPTS (5*64)
+
+/* Sequence numbers are used in YAFFS2 to determine block allocation order.
+ * The range is limited slightly to help distinguish bad numbers from good.
+ * This also allows us to perhaps in the future use special numbers for
+ * special purposes.
+ * EFFFFF00 allows the allocation of 8 blocks per second (~1Mbytes) for 15 years,
+ * and is a larger number than the lifetime of a 2GB device.
+ */
+#define YAFFS_LOWEST_SEQUENCE_NUMBER 0x00001000
+#define YAFFS_HIGHEST_SEQUENCE_NUMBER 0xEFFFFF00
+
+/* ChunkCache is used for short read/write operations.*/
+typedef struct {
+ struct yaffs_ObjectStruct *object;
+ int chunkId;
+ int lastUse;
+ int dirty;
+ int nBytes; /* Only valid if the cache is dirty */
+ int locked; /* Can't push out or flush while locked. */
+#ifdef CONFIG_YAFFS_YAFFS2
+ __u8 *data;
+#else
+ __u8 data[YAFFS_BYTES_PER_CHUNK];
+#endif
+} yaffs_ChunkCache;
+
+
+
+/* Tags structures in RAM
+ * NB This uses bitfield. Bitfields should not straddle a u32 boundary otherwise
+ * the structure size will get blown out.
+ */
+
+#ifndef CONFIG_YAFFS_NO_YAFFS1
+typedef struct {
+ unsigned chunkId:20;
+ unsigned serialNumber:2;
+ unsigned byteCount:10;
+ unsigned objectId:18;
+ unsigned ecc:12;
+ unsigned unusedStuff:2;
+
+} yaffs_Tags;
+
+typedef union {
+ yaffs_Tags asTags;
+ __u8 asBytes[8];
+} yaffs_TagsUnion;
+
+#endif
+
+/* Stuff used for extended tags in YAFFS2 */
+
+typedef enum {
+ YAFFS_ECC_RESULT_UNKNOWN,
+ YAFFS_ECC_RESULT_NO_ERROR,
+ YAFFS_ECC_RESULT_FIXED,
+ YAFFS_ECC_RESULT_UNFIXED
+} yaffs_ECCResult;
+
+typedef enum {
+ YAFFS_OBJECT_TYPE_UNKNOWN,
+ YAFFS_OBJECT_TYPE_FILE,
+ YAFFS_OBJECT_TYPE_SYMLINK,
+ YAFFS_OBJECT_TYPE_DIRECTORY,
+ YAFFS_OBJECT_TYPE_HARDLINK,
+ YAFFS_OBJECT_TYPE_SPECIAL
+} yaffs_ObjectType;
+
+#define YAFFS_OBJECT_TYPE_MAX YAFFS_OBJECT_TYPE_SPECIAL
+
+typedef struct {
+
+ unsigned validMarker0;
+ unsigned chunkUsed; /* Status of the chunk: used or unused */
+ unsigned objectId; /* If 0 then this is not part of an object (unused) */
+ unsigned chunkId; /* If 0 then this is a header, else a data chunk */
+ unsigned byteCount; /* Only valid for data chunks */
+
+ /* The following stuff only has meaning when we read */
+ yaffs_ECCResult eccResult;
+ unsigned blockBad;
+
+ /* YAFFS 1 stuff */
+ unsigned chunkDeleted; /* The chunk is marked deleted */
+ unsigned serialNumber; /* Yaffs1 2-bit serial number */
+
+ /* YAFFS2 stuff */
+ unsigned sequenceNumber; /* The sequence number of this block */
+
+ /* Extra info if this is an object header (YAFFS2 only) */
+
+ unsigned extraHeaderInfoAvailable; /* There is extra info available if this is not zero */
+ unsigned extraParentObjectId; /* The parent object */
+ unsigned extraIsShrinkHeader; /* Is it a shrink header? */
+ unsigned extraShadows; /* Does this shadow another object? */
+
+ yaffs_ObjectType extraObjectType; /* What object type? */
+
+ unsigned extraFileLength; /* Length if it is a file */
+ unsigned extraEquivalentObjectId; /* Equivalent object Id if it is a hard link */
+
+ unsigned validMarker1;
+
+} yaffs_ExtendedTags;
+
+/* Spare structure for YAFFS1 */
+typedef struct {
+ __u8 tagByte0;
+ __u8 tagByte1;
+ __u8 tagByte2;
+ __u8 tagByte3;
+ __u8 pageStatus; /* set to 0 to delete the chunk */
+ __u8 blockStatus;
+ __u8 tagByte4;
+ __u8 tagByte5;
+ __u8 ecc1[3];
+ __u8 tagByte6;
+ __u8 tagByte7;
+ __u8 ecc2[3];
+} yaffs_Spare;
+
+/*Special structure for passing through to mtd */
+struct yaffs_NANDSpare {
+ yaffs_Spare spare;
+ int eccres1;
+ int eccres2;
+};
+
+/* Block data in RAM */
+
+typedef enum {
+ YAFFS_BLOCK_STATE_UNKNOWN = 0,
+
+ YAFFS_BLOCK_STATE_SCANNING,
+ YAFFS_BLOCK_STATE_NEEDS_SCANNING,
+ /* The block might have something on it (ie it is allocating or full, perhaps empty)
+ * but it needs to be scanned to determine its true state.
+ * This state is only valid during yaffs_Scan.
+ * NB We tolerate empty because the pre-scanner might be incapable of deciding
+ * However, if this state is returned on a YAFFS2 device, then we expect a sequence number
+ */
+
+ YAFFS_BLOCK_STATE_EMPTY,
+ /* This block is empty */
+
+ YAFFS_BLOCK_STATE_ALLOCATING,
+ /* This block is partially allocated.
+ * At least one page holds valid data.
+ * This is the one currently being used for page
+ * allocation. Should never be more than one of these
+ */
+
+ YAFFS_BLOCK_STATE_FULL,
+ /* All the pages in this block have been allocated.
+ */
+
+ YAFFS_BLOCK_STATE_DIRTY,
+ /* All pages have been allocated and deleted.
+ * Erase me, reuse me.
+ */
+
+ YAFFS_BLOCK_STATE_CHECKPOINT,
+ /* This block is assigned to holding checkpoint data.
+ */
+
+ YAFFS_BLOCK_STATE_COLLECTING,
+ /* This block is being garbage collected */
+
+ YAFFS_BLOCK_STATE_DEAD
+ /* This block has failed and is not in use */
+} yaffs_BlockState;
+
+#define YAFFS_NUMBER_OF_BLOCK_STATES (YAFFS_BLOCK_STATE_DEAD + 1)
+
+
+typedef struct {
+
+ int softDeletions:10; /* number of soft deleted pages */
+ int pagesInUse:10; /* number of pages in use */
+ unsigned blockState:4; /* One of the above block states. NB use unsigned because enum is sometimes an int */
+ __u32 needsRetiring:1; /* Data has failed on this block, need to get valid data off */
+ /* and retire the block. */
+ __u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+ __u32 gcPrioritise: 1; /* An ECC check or blank check has failed on this block.
+ It should be prioritised for GC */
+ __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+
+#ifdef CONFIG_YAFFS_YAFFS2
+ __u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+ __u32 sequenceNumber; /* block sequence number for yaffs2 */
+#endif
+
+} yaffs_BlockInfo;
+
+/* -------------------------- Object structure -------------------------------*/
+/* This is the object structure as stored on NAND */
+
+typedef struct {
+ yaffs_ObjectType type;
+
+ /* Apply to everything */
+ int parentObjectId;
+ __u16 sum__NoLongerUsed; /* checksum of name. No longer used */
+ YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+
+ /* Thes following apply to directories, files, symlinks - not hard links */
+ __u32 yst_mode; /* protection */
+
+#ifdef CONFIG_YAFFS_WINCE
+ __u32 notForWinCE[5];
+#else
+ __u32 yst_uid;
+ __u32 yst_gid;
+ __u32 yst_atime;
+ __u32 yst_mtime;
+ __u32 yst_ctime;
+#endif
+
+ /* File size applies to files only */
+ int fileSize;
+
+ /* Equivalent object id applies to hard links only. */
+ int equivalentObjectId;
+
+ /* Alias is for symlinks only. */
+ YCHAR alias[YAFFS_MAX_ALIAS_LENGTH + 1];
+
+ __u32 yst_rdev; /* device stuff for block and char devices (major/min) */
+
+#ifdef CONFIG_YAFFS_WINCE
+ __u32 win_ctime[2];
+ __u32 win_atime[2];
+ __u32 win_mtime[2];
+ __u32 roomToGrow[4];
+#else
+ __u32 roomToGrow[10];
+#endif
+
+ int shadowsObject; /* This object header shadows the specified object if > 0 */
+
+ /* isShrink applies to object headers written when we shrink the file (ie resize) */
+ __u32 isShrink;
+
+} yaffs_ObjectHeader;
+
+/*--------------------------- Tnode -------------------------- */
+
+union yaffs_Tnode_union {
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+ union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL + 1];
+#else
+ union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL];
+#endif
+/* __u16 level0[YAFFS_NTNODES_LEVEL0]; */
+
+};
+
+typedef union yaffs_Tnode_union yaffs_Tnode;
+
+struct yaffs_TnodeList_struct {
+ struct yaffs_TnodeList_struct *next;
+ yaffs_Tnode *tnodes;
+};
+
+typedef struct yaffs_TnodeList_struct yaffs_TnodeList;
+
+/*------------------------ Object -----------------------------*/
+/* An object can be one of:
+ * - a directory (no data, has children links
+ * - a regular file (data.... not prunes :->).
+ * - a symlink [symbolic link] (the alias).
+ * - a hard link
+ */
+
+typedef struct {
+ __u32 fileSize;
+ __u32 scannedFileSize;
+ __u32 shrinkSize;
+ int topLevel;
+ yaffs_Tnode *top;
+} yaffs_FileStructure;
+
+typedef struct {
+ struct list_head children; /* list of child links */
+} yaffs_DirectoryStructure;
+
+typedef struct {
+ YCHAR *alias;
+} yaffs_SymLinkStructure;
+
+typedef struct {
+ struct yaffs_ObjectStruct *equivalentObject;
+ __u32 equivalentObjectId;
+} yaffs_HardLinkStructure;
+
+typedef union {
+ yaffs_FileStructure fileVariant;
+ yaffs_DirectoryStructure directoryVariant;
+ yaffs_SymLinkStructure symLinkVariant;
+ yaffs_HardLinkStructure hardLinkVariant;
+} yaffs_ObjectVariant;
+
+struct yaffs_ObjectStruct {
+ __u8 deleted:1; /* This should only apply to unlinked files. */
+ __u8 softDeleted:1; /* it has also been soft deleted */
+ __u8 unlinked:1; /* An unlinked file. The file should be in the unlinked directory.*/
+ __u8 fake:1; /* A fake object has no presence on NAND. */
+ __u8 renameAllowed:1; /* Some objects are not allowed to be renamed. */
+ __u8 unlinkAllowed:1;
+ __u8 dirty:1; /* the object needs to be written to flash */
+ __u8 valid:1; /* When the file system is being loaded up, this
+ * object might be created before the data
+ * is available (ie. file data records appear before the header).
+ */
+ __u8 lazyLoaded:1; /* This object has been lazy loaded and is missing some detail */
+
+ __u8 deferedFree:1; /* For Linux kernel. Object is removed from NAND, but is
+ * still in the inode cache. Free of object is defered.
+ * until the inode is released.
+ */
+
+ __u8 serial; /* serial number of chunk in NAND. Cached here */
+ __u16 sum; /* sum of the name to speed searching */
+
+ struct yaffs_DeviceStruct *myDev; /* The device I'm on */
+
+ struct list_head hashLink; /* list of objects in this hash bucket */
+
+ struct list_head hardLinks; /* all the equivalent hard linked objects */
+
+ /* directory structure stuff */
+ /* also used for linking up the free list */
+ struct yaffs_ObjectStruct *parent;
+ struct list_head siblings;
+
+ /* Where's my object header in NAND? */
+ int chunkId;
+
+ int nDataChunks; /* Number of data chunks attached to the file. */
+
+ __u32 objectId; /* the object id value */
+
+ __u32 yst_mode;
+
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+ YCHAR shortName[YAFFS_SHORT_NAME_LENGTH + 1];
+#endif
+
+/* XXX U-BOOT XXX */
+/* #ifndef __KERNEL__ */
+ __u32 inUse;
+/* #endif */
+
+#ifdef CONFIG_YAFFS_WINCE
+ __u32 win_ctime[2];
+ __u32 win_mtime[2];
+ __u32 win_atime[2];
+#else
+ __u32 yst_uid;
+ __u32 yst_gid;
+ __u32 yst_atime;
+ __u32 yst_mtime;
+ __u32 yst_ctime;
+#endif
+
+ __u32 yst_rdev;
+
+/* XXX U-BOOT XXX */
+/* #ifndef __KERNEL__ */
+ struct inode *myInode;
+/* #endif */
+
+ yaffs_ObjectType variantType;
+
+ yaffs_ObjectVariant variant;
+
+};
+
+typedef struct yaffs_ObjectStruct yaffs_Object;
+
+struct yaffs_ObjectList_struct {
+ yaffs_Object *objects;
+ struct yaffs_ObjectList_struct *next;
+};
+
+typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+
+typedef struct {
+ struct list_head list;
+ int count;
+} yaffs_ObjectBucket;
+
+
+/* yaffs_CheckpointObject holds the definition of an object as dumped
+ * by checkpointing.
+ */
+
+typedef struct {
+ int structType;
+ __u32 objectId;
+ __u32 parentId;
+ int chunkId;
+
+ yaffs_ObjectType variantType:3;
+ __u8 deleted:1;
+ __u8 softDeleted:1;
+ __u8 unlinked:1;
+ __u8 fake:1;
+ __u8 renameAllowed:1;
+ __u8 unlinkAllowed:1;
+ __u8 serial;
+
+ int nDataChunks;
+ __u32 fileSizeOrEquivalentObjectId;
+
+}yaffs_CheckpointObject;
+
+/*--------------------- Temporary buffers ----------------
+ *
+ * These are chunk-sized working buffers. Each device has a few
+ */
+
+typedef struct {
+ __u8 *buffer;
+ int line; /* track from whence this buffer was allocated */
+ int maxLine;
+} yaffs_TempBuffer;
+
+/*----------------- Device ---------------------------------*/
+
+struct yaffs_DeviceStruct {
+ struct list_head devList;
+ const char *name;
+
+ /* Entry parameters set up way early. Yaffs sets up the rest.*/
+ int nDataBytesPerChunk; /* Should be a power of 2 >= 512 */
+ int nChunksPerBlock; /* does not need to be a power of 2 */
+ int nBytesPerSpare; /* spare area size */
+ int startBlock; /* Start block we're allowed to use */
+ int endBlock; /* End block we're allowed to use */
+ int nReservedBlocks; /* We want this tuneable so that we can reduce */
+ /* reserved blocks on NOR and RAM. */
+
+
+ /* Stuff used by the shared space checkpointing mechanism */
+ /* If this value is zero, then this mechanism is disabled */
+
+ int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+
+
+
+
+ int nShortOpCaches; /* If <= 0, then short op caching is disabled, else
+ * the number of short op caches (don't use too many)
+ */
+
+ int useHeaderFileSize; /* Flag to determine if we should use file sizes from the header */
+
+ int useNANDECC; /* Flag to decide whether or not to use NANDECC */
+
+ void *genericDevice; /* Pointer to device context
+ * On an mtd this holds the mtd pointer.
+ */
+ void *superBlock;
+
+ /* NAND access functions (Must be set before calling YAFFS)*/
+
+ int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+ int chunkInNAND, const __u8 * data,
+ const yaffs_Spare * spare);
+ int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+ int chunkInNAND, __u8 * data,
+ yaffs_Spare * spare);
+ int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+ int blockInNAND);
+ int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
+
+#ifdef CONFIG_YAFFS_YAFFS2
+ int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+ int chunkInNAND, const __u8 * data,
+ const yaffs_ExtendedTags * tags);
+ int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+ int chunkInNAND, __u8 * data,
+ yaffs_ExtendedTags * tags);
+ int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+ int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+ yaffs_BlockState * state, int *sequenceNumber);
+#endif
+
+ int isYaffs2;
+
+ /* The removeObjectCallback function must be supplied by OS flavours that
+ * need it. The Linux kernel does not use this, but yaffs direct does use
+ * it to implement the faster readdir
+ */
+ void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+
+ /* Callback to mark the superblock dirsty */
+ void (*markSuperBlockDirty)(void * superblock);
+
+ int wideTnodesDisabled; /* Set to disable wide tnodes */
+
+
+ /* End of stuff that must be set before initialisation. */
+
+ /* Checkpoint control. Can be set before or after initialisation */
+ __u8 skipCheckpointRead;
+ __u8 skipCheckpointWrite;
+
+ /* Runtime parameters. Set up by YAFFS. */
+
+ __u16 chunkGroupBits; /* 0 for devices <= 32MB. else log2(nchunks) - 16 */
+ __u16 chunkGroupSize; /* == 2^^chunkGroupBits */
+
+ /* Stuff to support wide tnodes */
+ __u32 tnodeWidth;
+ __u32 tnodeMask;
+
+ /* Stuff to support various file offses to chunk/offset translations */
+ /* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+ __u32 crumbMask;
+ __u32 crumbShift;
+ __u32 crumbsPerChunk;
+
+ /* Straight shifting for nDataBytesPerChunk being a power of 2 */
+ __u32 chunkShift;
+ __u32 chunkMask;
+
+
+/* XXX U-BOOT XXX */
+#if 0
+#ifndef __KERNEL__
+
+ struct semaphore sem; /* Semaphore for waiting on erasure.*/
+ struct semaphore grossLock; /* Gross locking semaphore */
+ void (*putSuperFunc) (struct super_block * sb);
+#endif
+#endif
+ __u8 *spareBuffer; /* For mtdif2 use. Don't know the size of the buffer
+ * at compile time so we have to allocate it.
+ */
+
+ int isMounted;
+
+ int isCheckpointed;
+
+
+ /* Stuff to support block offsetting to support start block zero */
+ int internalStartBlock;
+ int internalEndBlock;
+ int blockOffset;
+ int chunkOffset;
+
+
+ /* Runtime checkpointing stuff */
+ int checkpointPageSequence; /* running sequence number of checkpoint pages */
+ int checkpointByteCount;
+ int checkpointByteOffset;
+ __u8 *checkpointBuffer;
+ int checkpointOpenForWrite;
+ int blocksInCheckpoint;
+ int checkpointCurrentChunk;
+ int checkpointCurrentBlock;
+ int checkpointNextBlock;
+ int *checkpointBlockList;
+ int checkpointMaxBlocks;
+ __u32 checkpointSum;
+ __u32 checkpointXor;
+
+ /* Block Info */
+ yaffs_BlockInfo *blockInfo;
+ __u8 *chunkBits; /* bitmap of chunks in use */
+ unsigned blockInfoAlt:1; /* was allocated using alternative strategy */
+ unsigned chunkBitsAlt:1; /* was allocated using alternative strategy */
+ int chunkBitmapStride; /* Number of bytes of chunkBits per block.
+ * Must be consistent with nChunksPerBlock.
+ */
+
+ int nErasedBlocks;
+ int allocationBlock; /* Current block being allocated off */
+ __u32 allocationPage;
+ int allocationBlockFinder; /* Used to search for next allocation block */
+
+ /* Runtime state */
+ int nTnodesCreated;
+ yaffs_Tnode *freeTnodes;
+ int nFreeTnodes;
+ yaffs_TnodeList *allocatedTnodeList;
+
+ int isDoingGC;
+
+ int nObjectsCreated;
+ yaffs_Object *freeObjects;
+ int nFreeObjects;
+
+ yaffs_ObjectList *allocatedObjectList;
+
+ yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+
+ int nFreeChunks;
+
+ int currentDirtyChecker; /* Used to find current dirtiest block */
+
+ __u32 *gcCleanupList; /* objects to delete at the end of a GC. */
+ int nonAggressiveSkip; /* GC state/mode */
+
+ /* Statistcs */
+ int nPageWrites;
+ int nPageReads;
+ int nBlockErasures;
+ int nErasureFailures;
+ int nGCCopies;
+ int garbageCollections;
+ int passiveGarbageCollections;
+ int nRetriedWrites;
+ int nRetiredBlocks;
+ int eccFixed;
+ int eccUnfixed;
+ int tagsEccFixed;
+ int tagsEccUnfixed;
+ int nDeletions;
+ int nUnmarkedDeletions;
+
+ int hasPendingPrioritisedGCs; /* We think this device might have pending prioritised gcs */
+
+ /* Special directories */
+ yaffs_Object *rootDir;
+ yaffs_Object *lostNFoundDir;
+
+ /* Buffer areas for storing data to recover from write failures TODO
+ * __u8 bufferedData[YAFFS_CHUNKS_PER_BLOCK][YAFFS_BYTES_PER_CHUNK];
+ * yaffs_Spare bufferedSpare[YAFFS_CHUNKS_PER_BLOCK];
+ */
+
+ int bufferedBlock; /* Which block is buffered here? */
+ int doingBufferedBlockRewrite;
+
+ yaffs_ChunkCache *srCache;
+ int srLastUse;
+
+ int cacheHits;
+
+ /* Stuff for background deletion and unlinked files.*/
+ yaffs_Object *unlinkedDir; /* Directory where unlinked and deleted files live. */
+ yaffs_Object *deletedDir; /* Directory where deleted objects are sent to disappear. */
+ yaffs_Object *unlinkedDeletion; /* Current file being background deleted.*/
+ int nDeletedFiles; /* Count of files awaiting deletion;*/
+ int nUnlinkedFiles; /* Count of unlinked files. */
+ int nBackgroundDeletions; /* Count of background deletions. */
+
+
+ yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ int maxTemp;
+ int unmanagedTempAllocations;
+ int unmanagedTempDeallocations;
+
+ /* yaffs2 runtime stuff */
+ unsigned sequenceNumber; /* Sequence number of currently allocating block */
+ unsigned oldestDirtySequence;
+
+};
+
+typedef struct yaffs_DeviceStruct yaffs_Device;
+
+/* The static layout of bllock usage etc is stored in the super block header */
+typedef struct {
+ int StructType;
+ int version;
+ int checkpointStartBlock;
+ int checkpointEndBlock;
+ int startBlock;
+ int endBlock;
+ int rfu[100];
+} yaffs_SuperBlockHeader;
+
+/* The CheckpointDevice structure holds the device information that changes at runtime and
+ * must be preserved over unmount/mount cycles.
+ */
+typedef struct {
+ int structType;
+ int nErasedBlocks;
+ int allocationBlock; /* Current block being allocated off */
+ __u32 allocationPage;
+ int nFreeChunks;
+
+ int nDeletedFiles; /* Count of files awaiting deletion;*/
+ int nUnlinkedFiles; /* Count of unlinked files. */
+ int nBackgroundDeletions; /* Count of background deletions. */
+
+ /* yaffs2 runtime stuff */
+ unsigned sequenceNumber; /* Sequence number of currently allocating block */
+ unsigned oldestDirtySequence;
+
+} yaffs_CheckpointDevice;
+
+
+typedef struct {
+ int structType;
+ __u32 magic;
+ __u32 version;
+ __u32 head;
+} yaffs_CheckpointValidity;
+
+/* Function to manipulate block info */
+static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+{
+ if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+ blk));
+ YBUG();
+ }
+ return &dev->blockInfo[blk - dev->internalStartBlock];
+}
+
+/*----------------------- YAFFS Functions -----------------------*/
+
+int yaffs_GutsInitialise(yaffs_Device * dev);
+void yaffs_Deinitialise(yaffs_Device * dev);
+
+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
+
+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+ yaffs_Object * newDir, const YCHAR * newName);
+
+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+int yaffs_DeleteFile(yaffs_Object * obj);
+
+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+int yaffs_GetObjectFileLength(yaffs_Object * obj);
+int yaffs_GetObjectInode(yaffs_Object * obj);
+unsigned yaffs_GetObjectType(yaffs_Object * obj);
+int yaffs_GetObjectLinkCount(yaffs_Object * obj);
+
+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
+
+/* File operations */
+int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+ int nBytes);
+int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+ int nBytes, int writeThrough);
+int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+
+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid);
+int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
+
+/* Flushing and checkpointing */
+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+
+int yaffs_CheckpointSave(yaffs_Device *dev);
+int yaffs_CheckpointRestore(yaffs_Device *dev);
+
+/* Directory operations */
+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid);
+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+ int (*fn) (yaffs_Object *));
+
+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
+
+/* Link operations */
+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+ yaffs_Object * equivalentObject);
+
+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
+
+/* Symlink operations */
+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid,
+ const YCHAR * alias);
+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
+
+/* Special inodes (fifos, sockets and devices) */
+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+ __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+
+/* Special directories */
+yaffs_Object *yaffs_Root(yaffs_Device * dev);
+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
+
+#ifdef CONFIG_YAFFS_WINCE
+/* CONFIG_YAFFS_WINCE special stuff */
+void yfsd_WinFileTimeNow(__u32 target[2]);
+#endif
+
+/* XXX U-BOOT XXX */
+#if 0
+#ifndef __KERNEL__
+void yaffs_HandleDeferedFree(yaffs_Object * obj);
+#endif
+#endif
+
+/* Debug dump */
+int yaffs_DumpObject(yaffs_Object * obj);
+
+void yaffs_GutsTest(yaffs_Device * dev);
+
+/* A few useful functions */
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+int yaffs_CheckFF(__u8 * buffer, int nBytes);
+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+
+#endif
diff --git a/fs/yaffs2/yaffs_malloc.h b/fs/yaffs2/yaffs_malloc.h
new file mode 100644
index 0000000..122fb4c
--- /dev/null
+++ b/fs/yaffs2/yaffs_malloc.h
@@ -0,0 +1,26 @@
+#ifndef __YAFFS_MALLOC_H__
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* XXX U-BOOT XXX */
+#if 0
+#include <stdlib.h>
+#endif
+
+void *yaffs_malloc(size_t size);
+void yaffs_free(void *ptr);
+
+#endif
+
diff --git a/fs/yaffs2/yaffs_mtdif.c b/fs/yaffs2/yaffs_mtdif.c
new file mode 100644
index 0000000..407ef2b
--- /dev/null
+++ b/fs/yaffs2/yaffs_mtdif.c
@@ -0,0 +1,246 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+const char *yaffs_mtdif_c_version =
+ "$Id: yaffs_mtdif.c,v 1.19 2007/02/14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+
+#include "yaffs_mtdif.h"
+
+#include "linux/mtd/mtd.h"
+#include "linux/types.h"
+#include "linux/time.h"
+#include "linux/mtd/nand.h"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+static struct nand_oobinfo yaffs_oobinfo = {
+ .useecc = 1,
+ .eccbytes = 6,
+ .eccpos = {8, 9, 10, 13, 14, 15}
+};
+
+static struct nand_oobinfo yaffs_noeccinfo = {
+ .useecc = 0,
+};
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+{
+ oob[0] = spare->tagByte0;
+ oob[1] = spare->tagByte1;
+ oob[2] = spare->tagByte2;
+ oob[3] = spare->tagByte3;
+ oob[4] = spare->tagByte4;
+ oob[5] = spare->tagByte5 & 0x3f;
+ oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+ oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
+ oob[6] = spare->tagByte6;
+ oob[7] = spare->tagByte7;
+}
+
+static inline void translate_oob2spare(yaffs_Spare *spare, __u8 *oob)
+{
+ struct yaffs_NANDSpare *nspare = (struct yaffs_NANDSpare *)spare;
+ spare->tagByte0 = oob[0];
+ spare->tagByte1 = oob[1];
+ spare->tagByte2 = oob[2];
+ spare->tagByte3 = oob[3];
+ spare->tagByte4 = oob[4];
+ spare->tagByte5 = oob[5] == 0xff ? 0xff : oob[5] & 0x3f;
+ spare->blockStatus = oob[5] & 0x80 ? 0xff : 'Y';
+ spare->pageStatus = oob[5] & 0x40 ? 0xff : 0;
+ spare->ecc1[0] = spare->ecc1[1] = spare->ecc1[2] = 0xff;
+ spare->tagByte6 = oob[6];
+ spare->tagByte7 = oob[7];
+ spare->ecc2[0] = spare->ecc2[1] = spare->ecc2[2] = 0xff;
+
+ nspare->eccres1 = nspare->eccres2 = 0; /* FIXME */
+}
+#endif
+
+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data, const yaffs_Spare * spare)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ struct mtd_oob_ops ops;
+#endif
+ size_t dummy;
+ int retval = 0;
+
+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ __u8 spareAsBytes[8]; /* OOB */
+
+ if (data && !spare)
+ retval = mtd->write(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data);
+ else if (spare) {
+ if (dev->useNANDECC) {
+ translate_spare2oob(spare, spareAsBytes);
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooblen = 8; /* temp hack */
+ } else {
+ ops.mode = MTD_OOB_RAW;
+ ops.ooblen = YAFFS_BYTES_PER_SPARE;
+ }
+ ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen;
+ ops.datbuf = (u8 *)data;
+ ops.ooboffs = 0;
+ ops.oobbuf = spareAsBytes;
+ retval = mtd->write_oob(mtd, addr, &ops);
+ }
+#else
+ __u8 *spareAsBytes = (__u8 *) spare;
+
+ if (data && spare) {
+ if (dev->useNANDECC)
+ retval =
+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, spareAsBytes,
+ &yaffs_oobinfo);
+ else
+ retval =
+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, spareAsBytes,
+ &yaffs_noeccinfo);
+ } else {
+ if (data)
+ retval =
+ mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ data);
+ if (spare)
+ retval =
+ mtd->write_oob(mtd, addr, YAFFS_BYTES_PER_SPARE,
+ &dummy, spareAsBytes);
+ }
+#endif
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
+
+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+ yaffs_Spare * spare)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ struct mtd_oob_ops ops;
+#endif
+ size_t dummy;
+ int retval = 0;
+
+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ __u8 spareAsBytes[8]; /* OOB */
+
+ if (data && !spare)
+ retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data);
+ else if (spare) {
+ if (dev->useNANDECC) {
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooblen = 8; /* temp hack */
+ } else {
+ ops.mode = MTD_OOB_RAW;
+ ops.ooblen = YAFFS_BYTES_PER_SPARE;
+ }
+ ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen;
+ ops.datbuf = data;
+ ops.ooboffs = 0;
+ ops.oobbuf = spareAsBytes;
+ retval = mtd->read_oob(mtd, addr, &ops);
+ if (dev->useNANDECC)
+ translate_oob2spare(spare, spareAsBytes);
+ }
+#else
+ __u8 *spareAsBytes = (__u8 *) spare;
+
+ if (data && spare) {
+ if (dev->useNANDECC) {
+ /* Careful, this call adds 2 ints */
+ /* to the end of the spare data. Calling function */
+ /* should allocate enough memory for spare, */
+ /* i.e. [YAFFS_BYTES_PER_SPARE+2*sizeof(int)]. */
+ retval =
+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, spareAsBytes,
+ &yaffs_oobinfo);
+ } else {
+ retval =
+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, spareAsBytes,
+ &yaffs_noeccinfo);
+ }
+ } else {
+ if (data)
+ retval =
+ mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ data);
+ if (spare)
+ retval =
+ mtd->read_oob(mtd, addr, YAFFS_BYTES_PER_SPARE,
+ &dummy, spareAsBytes);
+ }
+#endif
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
+
+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ __u32 addr =
+ ((loff_t) blockNumber) * dev->nDataBytesPerChunk
+ * dev->nChunksPerBlock;
+ struct erase_info ei;
+ int retval = 0;
+
+ ei.mtd = mtd;
+ ei.addr = addr;
+ ei.len = dev->nDataBytesPerChunk * dev->nChunksPerBlock;
+ ei.time = 1000;
+ ei.retries = 2;
+ ei.callback = NULL;
+ ei.priv = (u_long) dev;
+
+ /* Todo finish off the ei if required */
+
+/* XXX U-BOOT XXX */
+#if 0
+ sema_init(&dev->sem, 0);
+#endif
+
+ retval = mtd->erase(mtd, &ei);
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
+
+int nandmtd_InitialiseNAND(yaffs_Device * dev)
+{
+ return YAFFS_OK;
+}
diff --git a/fs/yaffs2/yaffs_mtdif.h b/fs/yaffs2/yaffs_mtdif.h
new file mode 100644
index 0000000..f75e08c
--- /dev/null
+++ b/fs/yaffs2/yaffs_mtdif.h
@@ -0,0 +1,27 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_MTDIF_H__
+#define __YAFFS_MTDIF_H__
+
+#include "yaffs_guts.h"
+
+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data, const yaffs_Spare * spare);
+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+ yaffs_Spare * spare);
+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+int nandmtd_InitialiseNAND(yaffs_Device * dev);
+#endif
diff --git a/fs/yaffs2/yaffs_mtdif2.c b/fs/yaffs2/yaffs_mtdif2.c
new file mode 100644
index 0000000..cd2a2a1
--- /dev/null
+++ b/fs/yaffs2/yaffs_mtdif2.c
@@ -0,0 +1,235 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* mtd interface for YAFFS2 */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+#include "asm/errno.h"
+
+const char *yaffs_mtdif2_c_version =
+ "$Id: yaffs_mtdif2.c,v 1.17 2007/02/14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+
+#include "yaffs_mtdif2.h"
+
+#include "linux/mtd/mtd.h"
+#include "linux/types.h"
+#include "linux/time.h"
+
+#include "yaffs_packedtags2.h"
+
+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags * tags)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ struct mtd_oob_ops ops;
+#else
+ size_t dummy;
+#endif
+ int retval = 0;
+
+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+
+ yaffs_PackedTags2 pt;
+
+ T(YAFFS_TRACE_MTD,
+ (TSTR
+ ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ TENDSTR), chunkInNAND, data, tags));
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ if (tags)
+ yaffs_PackTags2(&pt, tags);
+ else
+ BUG(); /* both tags and data should always be present */
+
+ if (data) {
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooblen = sizeof(pt);
+ ops.len = dev->nDataBytesPerChunk;
+ ops.ooboffs = 0;
+ ops.datbuf = (__u8 *)data;
+ ops.oobbuf = (void *)&pt;
+ retval = mtd->write_oob(mtd, addr, &ops);
+ } else
+ BUG(); /* both tags and data should always be present */
+#else
+ if (tags) {
+ yaffs_PackTags2(&pt, tags);
+ }
+
+ if (data && tags) {
+ if (dev->useNANDECC)
+ retval =
+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, (__u8 *) & pt, NULL);
+ else
+ retval =
+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, (__u8 *) & pt, NULL);
+ } else {
+ if (data)
+ retval =
+ mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ data);
+ if (tags)
+ retval =
+ mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+ (__u8 *) & pt);
+
+ }
+#endif
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
+
+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+ __u8 * data, yaffs_ExtendedTags * tags)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ struct mtd_oob_ops ops;
+#endif
+ size_t dummy;
+ int retval = 0;
+
+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+
+ yaffs_PackedTags2 pt;
+
+ T(YAFFS_TRACE_MTD,
+ (TSTR
+ ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ TENDSTR), chunkInNAND, data, tags));
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ if (data && !tags)
+ retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data);
+ else if (tags) {
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooblen = sizeof(pt);
+ ops.len = data ? dev->nDataBytesPerChunk : sizeof(pt);
+ ops.ooboffs = 0;
+ ops.datbuf = data;
+ ops.oobbuf = dev->spareBuffer;
+ retval = mtd->read_oob(mtd, addr, &ops);
+ }
+#else
+ if (data && tags) {
+ if (dev->useNANDECC) {
+ retval =
+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, dev->spareBuffer,
+ NULL);
+ } else {
+ retval =
+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ &dummy, data, dev->spareBuffer,
+ NULL);
+ }
+ } else {
+ if (data)
+ retval =
+ mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ data);
+ if (tags)
+ retval =
+ mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ dev->spareBuffer);
+ }
+#endif
+
+ memcpy(&pt, dev->spareBuffer, sizeof(pt));
+
+ if (tags)
+ yaffs_UnpackTags2(tags, &pt);
+
+ if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+ tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
+
+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ int retval;
+ T(YAFFS_TRACE_MTD,
+ (TSTR("nandmtd2_MarkNANDBlockBad %d" TENDSTR), blockNo));
+
+ retval =
+ mtd->block_markbad(mtd,
+ blockNo * dev->nChunksPerBlock *
+ dev->nDataBytesPerChunk);
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+
+}
+
+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+ yaffs_BlockState * state, int *sequenceNumber)
+{
+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ int retval;
+
+ T(YAFFS_TRACE_MTD,
+ (TSTR("nandmtd2_QueryNANDBlock %d" TENDSTR), blockNo));
+ retval =
+ mtd->block_isbad(mtd,
+ blockNo * dev->nChunksPerBlock *
+ dev->nDataBytesPerChunk);
+
+ if (retval) {
+ T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+
+ *state = YAFFS_BLOCK_STATE_DEAD;
+ *sequenceNumber = 0;
+ } else {
+ yaffs_ExtendedTags t;
+ nandmtd2_ReadChunkWithTagsFromNAND(dev,
+ blockNo *
+ dev->nChunksPerBlock, NULL,
+ &t);
+
+ if (t.chunkUsed) {
+ *sequenceNumber = t.sequenceNumber;
+ *state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ } else {
+ *sequenceNumber = 0;
+ *state = YAFFS_BLOCK_STATE_EMPTY;
+ }
+ }
+ T(YAFFS_TRACE_MTD,
+ (TSTR("block is bad seq %d state %d" TENDSTR), *sequenceNumber,
+ *state));
+
+ if (retval == 0)
+ return YAFFS_OK;
+ else
+ return YAFFS_FAIL;
+}
diff --git a/fs/yaffs2/yaffs_mtdif2.h b/fs/yaffs2/yaffs_mtdif2.h
new file mode 100644
index 0000000..e70d751
--- /dev/null
+++ b/fs/yaffs2/yaffs_mtdif2.h
@@ -0,0 +1,29 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_MTDIF2_H__
+#define __YAFFS_MTDIF2_H__
+
+#include "yaffs_guts.h"
+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags * tags);
+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+ __u8 * data, yaffs_ExtendedTags * tags);
+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+ yaffs_BlockState * state, int *sequenceNumber);
+
+#endif
diff --git a/fs/yaffs2/yaffs_nand.c b/fs/yaffs2/yaffs_nand.c
new file mode 100644
index 0000000..b201655
--- /dev/null
+++ b/fs/yaffs2/yaffs_nand.c
@@ -0,0 +1,134 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+const char *yaffs_nand_c_version =
+ "$Id: yaffs_nand.c,v 1.7 2007/02/14 01:09:06 wookey Exp $";
+
+#include "yaffs_nand.h"
+#include "yaffs_tagscompat.h"
+#include "yaffs_tagsvalidity.h"
+
+
+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+ __u8 * buffer,
+ yaffs_ExtendedTags * tags)
+{
+ int result;
+ yaffs_ExtendedTags localTags;
+
+ int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+
+ /* If there are no tags provided, use local tags to get prioritised gc working */
+ if(!tags)
+ tags = &localTags;
+
+ if (dev->readChunkWithTagsFromNAND)
+ result = dev->readChunkWithTagsFromNAND(dev, realignedChunkInNAND, buffer,
+ tags);
+ else
+ result = yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(dev,
+ realignedChunkInNAND,
+ buffer,
+ tags);
+ if(tags &&
+ tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
+
+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+ yaffs_HandleChunkError(dev,bi);
+ }
+
+ return result;
+}
+
+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ const __u8 * buffer,
+ yaffs_ExtendedTags * tags)
+{
+ chunkInNAND -= dev->chunkOffset;
+
+
+ if (tags) {
+ tags->sequenceNumber = dev->sequenceNumber;
+ tags->chunkUsed = 1;
+ if (!yaffs_ValidateTags(tags)) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("Writing uninitialised tags" TENDSTR)));
+ YBUG();
+ }
+ T(YAFFS_TRACE_WRITE,
+ (TSTR("Writing chunk %d tags %d %d" TENDSTR), chunkInNAND,
+ tags->objectId, tags->chunkId));
+ } else {
+ T(YAFFS_TRACE_ERROR, (TSTR("Writing with no tags" TENDSTR)));
+ YBUG();
+ }
+
+ if (dev->writeChunkWithTagsToNAND)
+ return dev->writeChunkWithTagsToNAND(dev, chunkInNAND, buffer,
+ tags);
+ else
+ return yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(dev,
+ chunkInNAND,
+ buffer,
+ tags);
+}
+
+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
+{
+ blockNo -= dev->blockOffset;
+
+;
+ if (dev->markNANDBlockBad)
+ return dev->markNANDBlockBad(dev, blockNo);
+ else
+ return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+}
+
+int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+ int blockNo,
+ yaffs_BlockState * state,
+ unsigned *sequenceNumber)
+{
+ blockNo -= dev->blockOffset;
+
+ if (dev->queryNANDBlock)
+ return dev->queryNANDBlock(dev, blockNo, state, sequenceNumber);
+ else
+ return yaffs_TagsCompatabilityQueryNANDBlock(dev, blockNo,
+ state,
+ sequenceNumber);
+}
+
+
+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ int blockInNAND)
+{
+ int result;
+
+ blockInNAND -= dev->blockOffset;
+
+
+ dev->nBlockErasures++;
+ result = dev->eraseBlockInNAND(dev, blockInNAND);
+
+ return result;
+}
+
+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev)
+{
+ return dev->initialiseNAND(dev);
+}
diff --git a/fs/yaffs2/yaffs_nand.h b/fs/yaffs2/yaffs_nand.h
new file mode 100644
index 0000000..8ed1a2d
--- /dev/null
+++ b/fs/yaffs2/yaffs_nand.h
@@ -0,0 +1,44 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_NAND_H__
+#define __YAFFS_NAND_H__
+#include "yaffs_guts.h"
+
+
+
+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+ __u8 * buffer,
+ yaffs_ExtendedTags * tags);
+
+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ const __u8 * buffer,
+ yaffs_ExtendedTags * tags);
+
+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+
+int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+ int blockNo,
+ yaffs_BlockState * state,
+ unsigned *sequenceNumber);
+
+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ int blockInNAND);
+
+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+
+#endif
+
diff --git a/fs/yaffs2/yaffs_nandemul2k.h b/fs/yaffs2/yaffs_nandemul2k.h
new file mode 100644
index 0000000..13520e1
--- /dev/null
+++ b/fs/yaffs2/yaffs_nandemul2k.h
@@ -0,0 +1,39 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* Interface to emulated NAND functions (2k page size) */
+
+#ifndef __YAFFS_NANDEMUL2K_H__
+#define __YAFFS_NANDEMUL2K_H__
+
+#include "yaffs_guts.h"
+
+int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND, const __u8 * data,
+ yaffs_ExtendedTags * tags);
+int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND, __u8 * data,
+ yaffs_ExtendedTags * tags);
+int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+ yaffs_BlockState * state, int *sequenceNumber);
+int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ int blockInNAND);
+int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+int nandemul2k_GetBytesPerChunk(void);
+int nandemul2k_GetChunksPerBlock(void);
+int nandemul2k_GetNumberOfBlocks(void);
+
+#endif
diff --git a/fs/yaffs2/yaffs_packedtags1.c b/fs/yaffs2/yaffs_packedtags1.c
new file mode 100644
index 0000000..a149431
--- /dev/null
+++ b/fs/yaffs2/yaffs_packedtags1.c
@@ -0,0 +1,55 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include "yaffs_packedtags1.h"
+#include "yportenv.h"
+
+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
+{
+ pt->chunkId = t->chunkId;
+ pt->serialNumber = t->serialNumber;
+ pt->byteCount = t->byteCount;
+ pt->objectId = t->objectId;
+ pt->ecc = 0;
+ pt->deleted = (t->chunkDeleted) ? 0 : 1;
+ pt->unusedStuff = 0;
+ pt->shouldBeFF = 0xFFFFFFFF;
+
+}
+
+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
+{
+ static const __u8 allFF[] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0xff };
+
+ if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ t->blockBad = 0;
+ if (pt->shouldBeFF != 0xFFFFFFFF) {
+ t->blockBad = 1;
+ }
+ t->chunkUsed = 1;
+ t->objectId = pt->objectId;
+ t->chunkId = pt->chunkId;
+ t->byteCount = pt->byteCount;
+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+ t->chunkDeleted = (pt->deleted) ? 0 : 1;
+ t->serialNumber = pt->serialNumber;
+ } else {
+ memset(t, 0, sizeof(yaffs_ExtendedTags));
+
+ }
+}
diff --git a/fs/yaffs2/yaffs_packedtags1.h b/fs/yaffs2/yaffs_packedtags1.h
new file mode 100644
index 0000000..627b2f8
--- /dev/null
+++ b/fs/yaffs2/yaffs_packedtags1.h
@@ -0,0 +1,37 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* This is used to pack YAFFS1 tags, not YAFFS2 tags. */
+
+#ifndef __YAFFS_PACKEDTAGS1_H__
+#define __YAFFS_PACKEDTAGS1_H__
+
+#include "yaffs_guts.h"
+
+typedef struct {
+ unsigned chunkId:20;
+ unsigned serialNumber:2;
+ unsigned byteCount:10;
+ unsigned objectId:18;
+ unsigned ecc:12;
+ unsigned deleted:1;
+ unsigned unusedStuff:1;
+ unsigned shouldBeFF;
+
+} yaffs_PackedTags1;
+
+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
+#endif
diff --git a/fs/yaffs2/yaffs_packedtags2.c b/fs/yaffs2/yaffs_packedtags2.c
new file mode 100644
index 0000000..467d5ac
--- /dev/null
+++ b/fs/yaffs2/yaffs_packedtags2.c
@@ -0,0 +1,185 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include "yaffs_packedtags2.h"
+#include "yportenv.h"
+#include "yaffs_tagsvalidity.h"
+
+/* This code packs a set of extended tags into a binary structure for
+ * NAND storage
+ */
+
+/* Some of the information is "extra" struff which can be packed in to
+ * speed scanning
+ * This is defined by having the EXTRA_HEADER_INFO_FLAG set.
+ */
+
+/* Extra flags applied to chunkId */
+
+#define EXTRA_HEADER_INFO_FLAG 0x80000000
+#define EXTRA_SHRINK_FLAG 0x40000000
+#define EXTRA_SHADOWS_FLAG 0x20000000
+#define EXTRA_SPARE_FLAGS 0x10000000
+
+#define ALL_EXTRA_FLAGS 0xF0000000
+
+/* Also, the top 4 bits of the object Id are set to the object type. */
+#define EXTRA_OBJECT_TYPE_SHIFT (28)
+#define EXTRA_OBJECT_TYPE_MASK ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+
+static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
+{
+ T(YAFFS_TRACE_MTD,
+ (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+ pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+ pt->t.sequenceNumber));
+}
+
+static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
+{
+ T(YAFFS_TRACE_MTD,
+ (TSTR
+ ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+ "%d del %d ser %d seq %d"
+ TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ t->sequenceNumber));
+
+}
+
+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
+{
+ pt->t.chunkId = t->chunkId;
+ pt->t.sequenceNumber = t->sequenceNumber;
+ pt->t.byteCount = t->byteCount;
+ pt->t.objectId = t->objectId;
+
+ if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ /* Store the extra header info instead */
+ /* We save the parent object in the chunkId */
+ pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
+ | t->extraParentObjectId;
+ if (t->extraIsShrinkHeader) {
+ pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+ }
+ if (t->extraShadows) {
+ pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+ }
+
+ pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ pt->t.objectId |=
+ (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+
+ if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ pt->t.byteCount = t->extraEquivalentObjectId;
+ } else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+ pt->t.byteCount = t->extraFileLength;
+ } else {
+ pt->t.byteCount = 0;
+ }
+ }
+
+ yaffs_DumpPackedTags2(pt);
+ yaffs_DumpTags2(t);
+
+#ifndef YAFFS_IGNORE_TAGS_ECC
+ {
+ yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+ sizeof(yaffs_PackedTags2TagsPart),
+ &pt->ecc);
+ }
+#endif
+}
+
+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
+{
+
+ memset(t, 0, sizeof(yaffs_ExtendedTags));
+
+ yaffs_InitialiseTags(t);
+
+ if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+ /* Page is in use */
+#ifdef YAFFS_IGNORE_TAGS_ECC
+ {
+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+ }
+#else
+ {
+ yaffs_ECCOther ecc;
+ int result;
+ yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+ sizeof
+ (yaffs_PackedTags2TagsPart),
+ &ecc);
+ result =
+ yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+ sizeof
+ (yaffs_PackedTags2TagsPart),
+ &pt->ecc, &ecc);
+ switch(result){
+ case 0:
+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+ break;
+ case 1:
+ t->eccResult = YAFFS_ECC_RESULT_FIXED;
+ break;
+ case -1:
+ t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ break;
+ default:
+ t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ }
+ }
+#endif
+ t->blockBad = 0;
+ t->chunkUsed = 1;
+ t->objectId = pt->t.objectId;
+ t->chunkId = pt->t.chunkId;
+ t->byteCount = pt->t.byteCount;
+ t->chunkDeleted = 0;
+ t->serialNumber = 0;
+ t->sequenceNumber = pt->t.sequenceNumber;
+
+ /* Do extra header info stuff */
+
+ if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
+ t->chunkId = 0;
+ t->byteCount = 0;
+
+ t->extraHeaderInfoAvailable = 1;
+ t->extraParentObjectId =
+ pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
+ t->extraIsShrinkHeader =
+ (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ t->extraShadows =
+ (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ t->extraObjectType =
+ pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+
+ if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ t->extraEquivalentObjectId = pt->t.byteCount;
+ } else {
+ t->extraFileLength = pt->t.byteCount;
+ }
+ }
+ }
+
+ yaffs_DumpPackedTags2(pt);
+ yaffs_DumpTags2(t);
+
+}
diff --git a/fs/yaffs2/yaffs_packedtags2.h b/fs/yaffs2/yaffs_packedtags2.h
new file mode 100644
index 0000000..7c4a72c
--- /dev/null
+++ b/fs/yaffs2/yaffs_packedtags2.h
@@ -0,0 +1,38 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* This is used to pack YAFFS2 tags, not YAFFS1tags. */
+
+#ifndef __YAFFS_PACKEDTAGS2_H__
+#define __YAFFS_PACKEDTAGS2_H__
+
+#include "yaffs_guts.h"
+#include "yaffs_ecc.h"
+
+typedef struct {
+ unsigned sequenceNumber;
+ unsigned objectId;
+ unsigned chunkId;
+ unsigned byteCount;
+} yaffs_PackedTags2TagsPart;
+
+typedef struct {
+ yaffs_PackedTags2TagsPart t;
+ yaffs_ECCOther ecc;
+} yaffs_PackedTags2;
+
+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
+#endif
diff --git a/fs/yaffs2/yaffs_qsort.c b/fs/yaffs2/yaffs_qsort.c
new file mode 100644
index 0000000..a74709f
--- /dev/null
+++ b/fs/yaffs2/yaffs_qsort.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 1992, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include "yportenv.h"
+//#include <linux/string.h>
+
+/*
+ * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+ */
+#define swapcode(TYPE, parmi, parmj, n) { \
+ long i = (n) / sizeof (TYPE); \
+ register TYPE *pi = (TYPE *) (parmi); \
+ register TYPE *pj = (TYPE *) (parmj); \
+ do { \
+ register TYPE t = *pi; \
+ *pi++ = *pj; \
+ *pj++ = t; \
+ } while (--i > 0); \
+}
+
+#define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+ es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
+
+static __inline void
+swapfunc(char *a, char *b, int n, int swaptype)
+{
+ if (swaptype <= 1)
+ swapcode(long, a, b, n)
+ else
+ swapcode(char, a, b, n)
+}
+
+#define swap(a, b) \
+ if (swaptype == 0) { \
+ long t = *(long *)(a); \
+ *(long *)(a) = *(long *)(b); \
+ *(long *)(b) = t; \
+ } else \
+ swapfunc(a, b, es, swaptype)
+
+#define vecswap(a, b, n) if ((n) > 0) swapfunc(a, b, n, swaptype)
+
+static __inline char *
+med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+{
+ return cmp(a, b) < 0 ?
+ (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+ :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
+}
+
+#ifndef min
+#define min(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+void
+yaffs_qsort(void *aa, size_t n, size_t es,
+ int (*cmp)(const void *, const void *))
+{
+ char *pa, *pb, *pc, *pd, *pl, *pm, *pn;
+ int d, r, swaptype, swap_cnt;
+ register char *a = aa;
+
+loop: SWAPINIT(a, es);
+ swap_cnt = 0;
+ if (n < 7) {
+ for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ pl -= es)
+ swap(pl, pl - es);
+ return;
+ }
+ pm = (char *)a + (n / 2) * es;
+ if (n > 7) {
+ pl = (char *)a;
+ pn = (char *)a + (n - 1) * es;
+ if (n > 40) {
+ d = (n / 8) * es;
+ pl = med3(pl, pl + d, pl + 2 * d, cmp);
+ pm = med3(pm - d, pm, pm + d, cmp);
+ pn = med3(pn - 2 * d, pn - d, pn, cmp);
+ }
+ pm = med3(pl, pm, pn, cmp);
+ }
+ swap(a, pm);
+ pa = pb = (char *)a + es;
+
+ pc = pd = (char *)a + (n - 1) * es;
+ for (;;) {
+ while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ if (r == 0) {
+ swap_cnt = 1;
+ swap(pa, pb);
+ pa += es;
+ }
+ pb += es;
+ }
+ while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ if (r == 0) {
+ swap_cnt = 1;
+ swap(pc, pd);
+ pd -= es;
+ }
+ pc -= es;
+ }
+ if (pb > pc)
+ break;
+ swap(pb, pc);
+ swap_cnt = 1;
+ pb += es;
+ pc -= es;
+ }
+ if (swap_cnt == 0) { /* Switch to insertion sort */
+ for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ pl -= es)
+ swap(pl, pl - es);
+ return;
+ }
+
+ pn = (char *)a + n * es;
+ r = min(pa - (char *)a, pb - pa);
+ vecswap(a, pb - r, r);
+ r = min((long)(pd - pc), (long)(pn - pd - es));
+ vecswap(pb, pn - r, r);
+ if ((r = pb - pa) > es)
+ yaffs_qsort(a, r / es, es, cmp);
+ if ((r = pd - pc) > es) {
+ /* Iterate rather than recurse to save stack space */
+ a = pn - r;
+ n = r / es;
+ goto loop;
+ }
+/* yaffs_qsort(pn - r, r / es, es, cmp);*/
+}
diff --git a/fs/yaffs2/yaffs_qsort.h b/fs/yaffs2/yaffs_qsort.h
new file mode 100644
index 0000000..3ec7397
--- /dev/null
+++ b/fs/yaffs2/yaffs_qsort.h
@@ -0,0 +1,23 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YAFFS_QSORT_H__
+#define __YAFFS_QSORT_H__
+
+extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+ int (*cmp)(const void *, const void *));
+
+#endif
diff --git a/fs/yaffs2/yaffs_ramdisk.h b/fs/yaffs2/yaffs_ramdisk.h
new file mode 100644
index 0000000..045ab42
--- /dev/null
+++ b/fs/yaffs2/yaffs_ramdisk.h
@@ -0,0 +1,32 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * yaffs_ramdisk.h: yaffs ram disk component
+ */
+
+#ifndef __YAFFS_RAMDISK_H__
+#define __YAFFS_RAMDISK_H__
+
+
+#include "yaffs_guts.h"
+int yramdisk_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
+int yramdisk_WriteChunkWithTagsToNAND(yaffs_Device *dev,int chunkInNAND,const __u8 *data, yaffs_ExtendedTags *tags);
+int yramdisk_ReadChunkWithTagsFromNAND(yaffs_Device *dev,int chunkInNAND, __u8 *data, yaffs_ExtendedTags *tags);
+int yramdisk_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
+int yramdisk_InitialiseNAND(yaffs_Device *dev);
+int yramdisk_MarkNANDBlockBad(yaffs_Device *dev,int blockNumber);
+int yramdisk_QueryNANDBlock(yaffs_Device *dev, int blockNo, yaffs_BlockState *state, int *sequenceNumber);
+#endif
diff --git a/fs/yaffs2/yaffs_tagscompat.c b/fs/yaffs2/yaffs_tagscompat.c
new file mode 100644
index 0000000..70a8a8c
--- /dev/null
+++ b/fs/yaffs2/yaffs_tagscompat.c
@@ -0,0 +1,533 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include "yaffs_guts.h"
+#include "yaffs_tagscompat.h"
+#include "yaffs_ecc.h"
+
+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
+#ifdef NOTYET
+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_Spare * spare);
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+ const yaffs_Spare * spare);
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
+#endif
+
+static const char yaffs_countBitsTable[256] = {
+ 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8
+};
+
+int yaffs_CountBits(__u8 x)
+{
+ int retVal;
+ retVal = yaffs_countBitsTable[x];
+ return retVal;
+}
+
+/********** Tags ECC calculations *********/
+
+void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
+{
+ yaffs_ECCCalculate(data, spare->ecc1);
+ yaffs_ECCCalculate(&data[256], spare->ecc2);
+}
+
+void yaffs_CalcTagsECC(yaffs_Tags * tags)
+{
+ /* Calculate an ecc */
+
+ unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes;
+ unsigned i, j;
+ unsigned ecc = 0;
+ unsigned bit = 0;
+
+ tags->ecc = 0;
+
+ for (i = 0; i < 8; i++) {
+ for (j = 1; j & 0xff; j <<= 1) {
+ bit++;
+ if (b[i] & j) {
+ ecc ^= bit;
+ }
+ }
+ }
+
+ tags->ecc = ecc;
+
+}
+
+int yaffs_CheckECCOnTags(yaffs_Tags * tags)
+{
+ unsigned ecc = tags->ecc;
+
+ yaffs_CalcTagsECC(tags);
+
+ ecc ^= tags->ecc;
+
+ if (ecc && ecc <= 64) {
+ /* TODO: Handle the failure better. Retire? */
+ unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes;
+
+ ecc--;
+
+ b[ecc / 8] ^= (1 << (ecc & 7));
+
+ /* Now recvalc the ecc */
+ yaffs_CalcTagsECC(tags);
+
+ return 1; /* recovered error */
+ } else if (ecc) {
+ /* Wierd ecc failure value */
+ /* TODO Need to do somethiong here */
+ return -1; /* unrecovered error */
+ }
+
+ return 0;
+}
+
+/********** Tags **********/
+
+static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+ yaffs_Tags * tagsPtr)
+{
+ yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+
+ yaffs_CalcTagsECC(tagsPtr);
+
+ sparePtr->tagByte0 = tu->asBytes[0];
+ sparePtr->tagByte1 = tu->asBytes[1];
+ sparePtr->tagByte2 = tu->asBytes[2];
+ sparePtr->tagByte3 = tu->asBytes[3];
+ sparePtr->tagByte4 = tu->asBytes[4];
+ sparePtr->tagByte5 = tu->asBytes[5];
+ sparePtr->tagByte6 = tu->asBytes[6];
+ sparePtr->tagByte7 = tu->asBytes[7];
+}
+
+static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+ yaffs_Tags * tagsPtr)
+{
+ yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ int result;
+
+ tu->asBytes[0] = sparePtr->tagByte0;
+ tu->asBytes[1] = sparePtr->tagByte1;
+ tu->asBytes[2] = sparePtr->tagByte2;
+ tu->asBytes[3] = sparePtr->tagByte3;
+ tu->asBytes[4] = sparePtr->tagByte4;
+ tu->asBytes[5] = sparePtr->tagByte5;
+ tu->asBytes[6] = sparePtr->tagByte6;
+ tu->asBytes[7] = sparePtr->tagByte7;
+
+ result = yaffs_CheckECCOnTags(tagsPtr);
+ if (result > 0) {
+ dev->tagsEccFixed++;
+ } else if (result < 0) {
+ dev->tagsEccUnfixed++;
+ }
+}
+
+static void yaffs_SpareInitialise(yaffs_Spare * spare)
+{
+ memset(spare, 0xFF, sizeof(yaffs_Spare));
+}
+
+static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND, const __u8 * data,
+ yaffs_Spare * spare)
+{
+ if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("**>> yaffs chunk %d is not valid" TENDSTR),
+ chunkInNAND));
+ return YAFFS_FAIL;
+ }
+
+ dev->nPageWrites++;
+ return dev->writeChunkToNAND(dev, chunkInNAND, data, spare);
+}
+
+static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND,
+ __u8 * data,
+ yaffs_Spare * spare,
+ yaffs_ECCResult * eccResult,
+ int doErrorCorrection)
+{
+ int retVal;
+ yaffs_Spare localSpare;
+
+ dev->nPageReads++;
+
+ if (!spare && data) {
+ /* If we don't have a real spare, then we use a local one. */
+ /* Need this for the calculation of the ecc */
+ spare = &localSpare;
+ }
+
+ if (!dev->useNANDECC) {
+ retVal = dev->readChunkFromNAND(dev, chunkInNAND, data, spare);
+ if (data && doErrorCorrection) {
+ /* Do ECC correction */
+ /* Todo handle any errors */
+ int eccResult1, eccResult2;
+ __u8 calcEcc[3];
+
+ yaffs_ECCCalculate(data, calcEcc);
+ eccResult1 =
+ yaffs_ECCCorrect(data, spare->ecc1, calcEcc);
+ yaffs_ECCCalculate(&data[256], calcEcc);
+ eccResult2 =
+ yaffs_ECCCorrect(&data[256], spare->ecc2, calcEcc);
+
+ if (eccResult1 > 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>yaffs ecc error fix performed on chunk %d:0"
+ TENDSTR), chunkInNAND));
+ dev->eccFixed++;
+ } else if (eccResult1 < 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>yaffs ecc error unfixed on chunk %d:0"
+ TENDSTR), chunkInNAND));
+ dev->eccUnfixed++;
+ }
+
+ if (eccResult2 > 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>yaffs ecc error fix performed on chunk %d:1"
+ TENDSTR), chunkInNAND));
+ dev->eccFixed++;
+ } else if (eccResult2 < 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>yaffs ecc error unfixed on chunk %d:1"
+ TENDSTR), chunkInNAND));
+ dev->eccUnfixed++;
+ }
+
+ if (eccResult1 || eccResult2) {
+ /* We had a data problem on this page */
+ yaffs_HandleReadDataError(dev, chunkInNAND);
+ }
+
+ if (eccResult1 < 0 || eccResult2 < 0)
+ *eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ else if (eccResult1 > 0 || eccResult2 > 0)
+ *eccResult = YAFFS_ECC_RESULT_FIXED;
+ else
+ *eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+ }
+ } else {
+ /* Must allocate enough memory for spare+2*sizeof(int) */
+ /* for ecc results from device. */
+ struct yaffs_NANDSpare nspare;
+ retVal =
+ dev->readChunkFromNAND(dev, chunkInNAND, data,
+ (yaffs_Spare *) & nspare);
+ memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ if (data && doErrorCorrection) {
+ if (nspare.eccres1 > 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>mtd ecc error fix performed on chunk %d:0"
+ TENDSTR), chunkInNAND));
+ } else if (nspare.eccres1 < 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>mtd ecc error unfixed on chunk %d:0"
+ TENDSTR), chunkInNAND));
+ }
+
+ if (nspare.eccres2 > 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>mtd ecc error fix performed on chunk %d:1"
+ TENDSTR), chunkInNAND));
+ } else if (nspare.eccres2 < 0) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("**>>mtd ecc error unfixed on chunk %d:1"
+ TENDSTR), chunkInNAND));
+ }
+
+ if (nspare.eccres1 || nspare.eccres2) {
+ /* We had a data problem on this page */
+ yaffs_HandleReadDataError(dev, chunkInNAND);
+ }
+
+ if (nspare.eccres1 < 0 || nspare.eccres2 < 0)
+ *eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ else if (nspare.eccres1 > 0 || nspare.eccres2 > 0)
+ *eccResult = YAFFS_ECC_RESULT_FIXED;
+ else
+ *eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+
+ }
+ }
+ return retVal;
+}
+
+#ifdef NOTYET
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ int chunkInNAND)
+{
+
+ static int init = 0;
+ static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ /* Might as well always allocate the larger size for */
+ /* dev->useNANDECC == true; */
+ static __u8 spare[sizeof(struct yaffs_NANDSpare)];
+
+ dev->readChunkFromNAND(dev, chunkInNAND, data, (yaffs_Spare *) spare);
+
+ if (!init) {
+ memset(cmpbuf, 0xff, YAFFS_BYTES_PER_CHUNK);
+ init = 1;
+ }
+
+ if (memcmp(cmpbuf, data, YAFFS_BYTES_PER_CHUNK))
+ return YAFFS_FAIL;
+ if (memcmp(cmpbuf, spare, 16))
+ return YAFFS_FAIL;
+
+ return YAFFS_OK;
+
+}
+#endif
+
+/*
+ * Functions for robustisizing
+ */
+
+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
+{
+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+
+ /* Mark the block for retirement */
+ yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+
+ /* TODO:
+ * Just do a garbage collection on the affected block
+ * then retire the block
+ * NB recursion
+ */
+}
+
+#ifdef NOTYET
+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
+{
+}
+
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+ const __u8 * data,
+ const yaffs_Spare * spare)
+{
+}
+
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+ const yaffs_Spare * spare)
+{
+}
+
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
+{
+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+
+ /* Mark the block for retirement */
+ yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
+ /* Delete the chunk */
+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+}
+
+static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+ const yaffs_Spare * s0, const yaffs_Spare * s1)
+{
+
+ if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+ s0->tagByte0 != s1->tagByte0 ||
+ s0->tagByte1 != s1->tagByte1 ||
+ s0->tagByte2 != s1->tagByte2 ||
+ s0->tagByte3 != s1->tagByte3 ||
+ s0->tagByte4 != s1->tagByte4 ||
+ s0->tagByte5 != s1->tagByte5 ||
+ s0->tagByte6 != s1->tagByte6 ||
+ s0->tagByte7 != s1->tagByte7 ||
+ s0->ecc1[0] != s1->ecc1[0] ||
+ s0->ecc1[1] != s1->ecc1[1] ||
+ s0->ecc1[2] != s1->ecc1[2] ||
+ s0->ecc2[0] != s1->ecc2[0] ||
+ s0->ecc2[1] != s1->ecc2[1] || s0->ecc2[2] != s1->ecc2[2]) {
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* NOTYET */
+
+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags *
+ eTags)
+{
+ yaffs_Spare spare;
+ yaffs_Tags tags;
+
+ yaffs_SpareInitialise(&spare);
+
+ if (eTags->chunkDeleted) {
+ spare.pageStatus = 0;
+ } else {
+ tags.objectId = eTags->objectId;
+ tags.chunkId = eTags->chunkId;
+ tags.byteCount = eTags->byteCount;
+ tags.serialNumber = eTags->serialNumber;
+
+ if (!dev->useNANDECC && data) {
+ yaffs_CalcECC(data, &spare);
+ }
+ yaffs_LoadTagsIntoSpare(&spare, &tags);
+
+ }
+
+ return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+}
+
+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ __u8 * data,
+ yaffs_ExtendedTags * eTags)
+{
+
+ yaffs_Spare spare;
+ yaffs_Tags tags;
+ yaffs_ECCResult eccResult;
+
+ static yaffs_Spare spareFF;
+ static int init;
+
+ if (!init) {
+ memset(&spareFF, 0xFF, sizeof(spareFF));
+ init = 1;
+ }
+
+ if (yaffs_ReadChunkFromNAND
+ (dev, chunkInNAND, data, &spare, &eccResult, 1)) {
+ /* eTags may be NULL */
+ if (eTags) {
+
+ int deleted =
+ (yaffs_CountBits(spare.pageStatus) < 7) ? 1 : 0;
+
+ eTags->chunkDeleted = deleted;
+ eTags->eccResult = eccResult;
+ eTags->blockBad = 0; /* We're reading it */
+ /* therefore it is not a bad block */
+ eTags->chunkUsed =
+ (memcmp(&spareFF, &spare, sizeof(spareFF)) !=
+ 0) ? 1 : 0;
+
+ if (eTags->chunkUsed) {
+ yaffs_GetTagsFromSpare(dev, &spare, &tags);
+
+ eTags->objectId = tags.objectId;
+ eTags->chunkId = tags.chunkId;
+ eTags->byteCount = tags.byteCount;
+ eTags->serialNumber = tags.serialNumber;
+ }
+ }
+
+ return YAFFS_OK;
+ } else {
+ return YAFFS_FAIL;
+ }
+}
+
+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ int blockInNAND)
+{
+
+ yaffs_Spare spare;
+
+ memset(&spare, 0xff, sizeof(yaffs_Spare));
+
+ spare.blockStatus = 'Y';
+
+ yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock, NULL,
+ &spare);
+ yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock + 1,
+ NULL, &spare);
+
+ return YAFFS_OK;
+
+}
+
+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+ int blockNo, yaffs_BlockState *
+ state,
+ int *sequenceNumber)
+{
+
+ yaffs_Spare spare0, spare1;
+ static yaffs_Spare spareFF;
+ static int init;
+ yaffs_ECCResult dummy;
+
+ if (!init) {
+ memset(&spareFF, 0xFF, sizeof(spareFF));
+ init = 1;
+ }
+
+ *sequenceNumber = 0;
+
+ yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock, NULL,
+ &spare0, &dummy, 1);
+ yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock + 1, NULL,
+ &spare1, &dummy, 1);
+
+ if (yaffs_CountBits(spare0.blockStatus & spare1.blockStatus) < 7)
+ *state = YAFFS_BLOCK_STATE_DEAD;
+ else if (memcmp(&spareFF, &spare0, sizeof(spareFF)) == 0)
+ *state = YAFFS_BLOCK_STATE_EMPTY;
+ else
+ *state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+
+ return YAFFS_OK;
+}
diff --git a/fs/yaffs2/yaffs_tagscompat.h b/fs/yaffs2/yaffs_tagscompat.h
new file mode 100644
index 0000000..c1edb6a
--- /dev/null
+++ b/fs/yaffs2/yaffs_tagscompat.h
@@ -0,0 +1,40 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_TAGSCOMPAT_H__
+#define __YAFFS_TAGSCOMPAT_H__
+
+#include "yaffs_guts.h"
+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ const __u8 * data,
+ const yaffs_ExtendedTags *
+ tags);
+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+ int chunkInNAND,
+ __u8 * data,
+ yaffs_ExtendedTags *
+ tags);
+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ int blockNo);
+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+ int blockNo, yaffs_BlockState *
+ state, int *sequenceNumber);
+
+void yaffs_CalcTagsECC(yaffs_Tags * tags);
+int yaffs_CheckECCOnTags(yaffs_Tags * tags);
+int yaffs_CountBits(__u8 byte);
+
+#endif
diff --git a/fs/yaffs2/yaffs_tagsvalidity.c b/fs/yaffs2/yaffs_tagsvalidity.c
new file mode 100644
index 0000000..f588d3a
--- /dev/null
+++ b/fs/yaffs2/yaffs_tagsvalidity.c
@@ -0,0 +1,31 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include "yaffs_tagsvalidity.h"
+
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
+{
+ memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ tags->validMarker0 = 0xAAAAAAAA;
+ tags->validMarker1 = 0x55555555;
+}
+
+int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
+{
+ return (tags->validMarker0 == 0xAAAAAAAA &&
+ tags->validMarker1 == 0x55555555);
+
+}
diff --git a/fs/yaffs2/yaffs_tagsvalidity.h b/fs/yaffs2/yaffs_tagsvalidity.h
new file mode 100644
index 0000000..ba56727
--- /dev/null
+++ b/fs/yaffs2/yaffs_tagsvalidity.h
@@ -0,0 +1,24 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YAFFS_TAGS_VALIDITY_H__
+#define __YAFFS_TAGS_VALIDITY_H__
+
+#include "yaffs_guts.h"
+
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
+#endif
diff --git a/fs/yaffs2/yaffscfg.c b/fs/yaffs2/yaffscfg.c
new file mode 100644
index 0000000..a4a0924
--- /dev/null
+++ b/fs/yaffs2/yaffscfg.c
@@ -0,0 +1,417 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * yaffscfg.c The configuration for the "direct" use of yaffs.
+ *
+ * This file is intended to be modified to your requirements.
+ * There is no need to redistribute this file.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+
+#include <config.h>
+#include "nand.h"
+#include "yaffscfg.h"
+#include "yaffsfs.h"
+#include "yaffs_packedtags2.h"
+#include "yaffs_mtdif.h"
+#include "yaffs_mtdif2.h"
+#if 0
+#include <errno.h>
+#else
+#include "malloc.h"
+#endif
+
+unsigned yaffs_traceMask = 0xFFFFFFFF;
+static int yaffs_errno = 0;
+
+void yaffsfs_SetError(int err)
+{
+ //Do whatever to set error
+ yaffs_errno = err;
+}
+
+int yaffsfs_GetError(void)
+{
+ return yaffs_errno;
+}
+
+void yaffsfs_Lock(void)
+{
+}
+
+void yaffsfs_Unlock(void)
+{
+}
+
+__u32 yaffsfs_CurrentTime(void)
+{
+ return 0;
+}
+
+void *yaffs_malloc(size_t size)
+{
+ return malloc(size);
+}
+
+void yaffs_free(void *ptr)
+{
+ free(ptr);
+}
+
+void yaffsfs_LocalInitialisation(void)
+{
+ // Define locking semaphore.
+}
+
+// Configuration for:
+// /ram 2MB ramdisk
+// /boot 2MB boot disk (flash)
+// /flash 14MB flash disk (flash)
+// NB Though /boot and /flash occupy the same physical device they
+// are still disticnt "yaffs_Devices. You may think of these as "partitions"
+// using non-overlapping areas in the same device.
+//
+
+#include "yaffs_ramdisk.h"
+#include "yaffs_flashif.h"
+
+static int isMounted = 0;
+#define MOUNT_POINT "/flash"
+extern nand_info_t nand_info[];
+
+/* XXX U-BOOT XXX */
+#if 0
+static yaffs_Device ramDev;
+static yaffs_Device bootDev;
+static yaffs_Device flashDev;
+#endif
+
+static yaffsfs_DeviceConfiguration yaffsfs_config[] = {
+/* XXX U-BOOT XXX */
+#if 0
+ { "/ram", &ramDev},
+ { "/boot", &bootDev},
+ { "/flash", &flashDev},
+#else
+ { MOUNT_POINT, 0},
+#endif
+ {(void *)0,(void *)0}
+};
+
+
+int yaffs_StartUp(void)
+{
+ struct mtd_info *mtd = &nand_info[0];
+ int yaffsVersion = 2;
+ int nBlocks;
+
+ yaffs_Device *flashDev = calloc(1, sizeof(yaffs_Device));
+ yaffsfs_config[0].dev = flashDev;
+
+ // Stuff to configure YAFFS
+ // Stuff to initialise anything special (eg lock semaphore).
+ yaffsfs_LocalInitialisation();
+
+ // Set up devices
+
+/* XXX U-BOOT XXX */
+#if 0
+ // /ram
+ ramDev.nBytesPerChunk = 512;
+ ramDev.nChunksPerBlock = 32;
+ ramDev.nReservedBlocks = 2; // Set this smaller for RAM
+ ramDev.startBlock = 1; // Can't use block 0
+ ramDev.endBlock = 127; // Last block in 2MB.
+ ramDev.useNANDECC = 1;
+ ramDev.nShortOpCaches = 0; // Disable caching on this device.
+ ramDev.genericDevice = (void *) 0; // Used to identify the device in fstat.
+ ramDev.writeChunkWithTagsToNAND = yramdisk_WriteChunkWithTagsToNAND;
+ ramDev.readChunkWithTagsFromNAND = yramdisk_ReadChunkWithTagsFromNAND;
+ ramDev.eraseBlockInNAND = yramdisk_EraseBlockInNAND;
+ ramDev.initialiseNAND = yramdisk_InitialiseNAND;
+
+ // /boot
+ bootDev.nBytesPerChunk = 612;
+ bootDev.nChunksPerBlock = 32;
+ bootDev.nReservedBlocks = 5;
+ bootDev.startBlock = 1; // Can't use block 0
+ bootDev.endBlock = 127; // Last block in 2MB.
+ bootDev.useNANDECC = 0; // use YAFFS's ECC
+ bootDev.nShortOpCaches = 10; // Use caches
+ bootDev.genericDevice = (void *) 1; // Used to identify the device in fstat.
+ bootDev.writeChunkToNAND = yflash_WriteChunkToNAND;
+ bootDev.readChunkFromNAND = yflash_ReadChunkFromNAND;
+ bootDev.eraseBlockInNAND = yflash_EraseBlockInNAND;
+ bootDev.initialiseNAND = yflash_InitialiseNAND;
+#endif
+
+ // /flash
+ flashDev->nReservedBlocks = 5;
+// flashDev->nShortOpCaches = (options.no_cache) ? 0 : 10;
+ flashDev->nShortOpCaches = 10; // Use caches
+ flashDev->useNANDECC = 0; // do not use YAFFS's ECC
+
+ if (yaffsVersion == 2)
+ {
+ flashDev->writeChunkWithTagsToNAND = nandmtd2_WriteChunkWithTagsToNAND;
+ flashDev->readChunkWithTagsFromNAND = nandmtd2_ReadChunkWithTagsFromNAND;
+ flashDev->markNANDBlockBad = nandmtd2_MarkNANDBlockBad;
+ flashDev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ flashDev->spareBuffer = YMALLOC(mtd->oobsize);
+ flashDev->isYaffs2 = 1;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+ flashDev->nDataBytesPerChunk = mtd->writesize;
+ flashDev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+#else
+ flashDev->nDataBytesPerChunk = mtd->oobblock;
+ flashDev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+#endif
+ nBlocks = mtd->size / mtd->erasesize;
+
+ flashDev->nCheckpointReservedBlocks = 10;
+ flashDev->startBlock = 0;
+ flashDev->endBlock = nBlocks - 1;
+ }
+ else
+ {
+ flashDev->writeChunkToNAND = nandmtd_WriteChunkToNAND;
+ flashDev->readChunkFromNAND = nandmtd_ReadChunkFromNAND;
+ flashDev->isYaffs2 = 0;
+ nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
+ flashDev->startBlock = 320;
+ flashDev->endBlock = nBlocks - 1;
+ flashDev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+ flashDev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ }
+
+ /* ... and common functions */
+ flashDev->eraseBlockInNAND = nandmtd_EraseBlockInNAND;
+ flashDev->initialiseNAND = nandmtd_InitialiseNAND;
+
+ yaffs_initialise(yaffsfs_config);
+
+ return 0;
+}
+
+
+void make_a_file(char *yaffsName,char bval,int sizeOfFile)
+{
+ int outh;
+ int i;
+ unsigned char buffer[100];
+
+ outh = yaffs_open(yaffsName, O_CREAT | O_RDWR | O_TRUNC, S_IREAD | S_IWRITE);
+ if (outh < 0)
+ {
+ printf("Error opening file: %d\n", outh);
+ return;
+ }
+
+ memset(buffer,bval,100);
+
+ do{
+ i = sizeOfFile;
+ if(i > 100) i = 100;
+ sizeOfFile -= i;
+
+ yaffs_write(outh,buffer,i);
+
+ } while (sizeOfFile > 0);
+
+
+ yaffs_close(outh);
+}
+
+void read_a_file(char *fn)
+{
+ int h;
+ int i = 0;
+ unsigned char b;
+
+ h = yaffs_open(fn, O_RDWR,0);
+ if(h<0)
+ {
+ printf("File not found\n");
+ return;
+ }
+
+ while(yaffs_read(h,&b,1)> 0)
+ {
+ printf("%02x ",b);
+ i++;
+ if(i > 32)
+ {
+ printf("\n");
+ i = 0;;
+ }
+ }
+ printf("\n");
+ yaffs_close(h);
+}
+
+void cmd_yaffs_mount(char *mp)
+{
+ yaffs_StartUp();
+ int retval = yaffs_mount(mp);
+ if( retval != -1)
+ isMounted = 1;
+ else
+ printf("Error mounting %s, return value: %d\n", mp, yaffsfs_GetError());
+}
+
+static void checkMount(void)
+{
+ if( !isMounted )
+ {
+ cmd_yaffs_mount(MOUNT_POINT);
+ }
+}
+
+void cmd_yaffs_umount(char *mp)
+{
+ checkMount();
+ if( yaffs_unmount(mp) == -1)
+ printf("Error umounting %s, return value: %d\n", mp, yaffsfs_GetError());
+}
+
+void cmd_yaffs_write_file(char *yaffsName,char bval,int sizeOfFile)
+{
+ checkMount();
+ make_a_file(yaffsName,bval,sizeOfFile);
+}
+
+
+void cmd_yaffs_read_file(char *fn)
+{
+ checkMount();
+ read_a_file(fn);
+}
+
+
+void cmd_yaffs_mread_file(char *fn, char *addr)
+{
+ int h;
+ struct yaffs_stat s;
+
+ checkMount();
+
+ yaffs_stat(fn,&s);
+
+ printf ("Copy %s to 0x%08x... ", fn, addr);
+ h = yaffs_open(fn, O_RDWR,0);
+ if(h<0)
+ {
+ printf("File not found\n");
+ return;
+ }
+
+ yaffs_read(h,addr,(int)s.st_size);
+ printf("\t[DONE]\n");
+
+ yaffs_close(h);
+}
+
+
+void cmd_yaffs_mwrite_file(char *fn, char *addr, int size)
+{
+ int outh;
+
+ checkMount();
+ outh = yaffs_open(fn, O_CREAT | O_RDWR | O_TRUNC, S_IREAD | S_IWRITE);
+ if (outh < 0)
+ {
+ printf("Error opening file: %d\n", outh);
+ }
+
+ yaffs_write(outh,addr,size);
+
+ yaffs_close(outh);
+}
+
+
+void cmd_yaffs_ls(const char *mountpt, int longlist)
+{
+ int i;
+ yaffs_DIR *d;
+ yaffs_dirent *de;
+ struct yaffs_stat stat;
+ char tempstr[255];
+
+ checkMount();
+ d = yaffs_opendir(mountpt);
+
+ if(!d)
+ {
+ printf("opendir failed\n");
+ }
+ else
+ {
+ for(i = 0; (de = yaffs_readdir(d)) != NULL; i++)
+ {
+ if (longlist)
+ {
+ sprintf(tempstr, "%s/%s", mountpt, de->d_name);
+ yaffs_stat(tempstr, &stat);
+ printf("%-25s\t%7d\n",de->d_name, stat.st_size);
+ }
+ else
+ {
+ printf("%s\n",de->d_name);
+ }
+ }
+ }
+}
+
+
+void cmd_yaffs_mkdir(const char *dir)
+{
+ checkMount();
+
+ int retval = yaffs_mkdir(dir, 0);
+
+ if ( retval < 0)
+ printf("yaffs_mkdir returning error: %d\n", retval);
+}
+
+void cmd_yaffs_rmdir(const char *dir)
+{
+ checkMount();
+
+ int retval = yaffs_rmdir(dir);
+
+ if ( retval < 0)
+ printf("yaffs_rmdir returning error: %d\n", retval);
+}
+
+void cmd_yaffs_rm(const char *path)
+{
+ checkMount();
+
+ int retval = yaffs_unlink(path);
+
+ if ( retval < 0)
+ printf("yaffs_unlink returning error: %d\n", retval);
+}
+
+void cmd_yaffs_mv(const char *oldPath, const char *newPath)
+{
+ checkMount();
+
+ int retval = yaffs_rename(newPath, oldPath);
+
+ if ( retval < 0)
+ printf("yaffs_unlink returning error: %d\n", retval);
+}
diff --git a/fs/yaffs2/yaffscfg.h b/fs/yaffs2/yaffscfg.h
new file mode 100644
index 0000000..6ae1696
--- /dev/null
+++ b/fs/yaffs2/yaffscfg.h
@@ -0,0 +1,46 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * Header file for using yaffs in an application via
+ * a direct interface.
+ */
+
+
+#ifndef __YAFFSCFG_H__
+#define __YAFFSCFG_H__
+
+
+#include "devextras.h"
+
+#define YAFFSFS_N_HANDLES 200
+
+
+typedef struct {
+ const char *prefix;
+ struct yaffs_DeviceStruct *dev;
+} yaffsfs_DeviceConfiguration;
+
+
+void yaffsfs_Lock(void);
+void yaffsfs_Unlock(void);
+
+__u32 yaffsfs_CurrentTime(void);
+
+void yaffsfs_SetError(int err);
+int yaffsfs_GetError(void);
+
+#endif
+
diff --git a/fs/yaffs2/yaffsfs.c b/fs/yaffs2/yaffsfs.c
new file mode 100644
index 0000000..f62c952
--- /dev/null
+++ b/fs/yaffs2/yaffsfs.c
@@ -0,0 +1,1510 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* XXX U-BOOT XXX */
+#include <common.h>
+#include <malloc.h>
+
+#include "yaffsfs.h"
+#include "yaffs_guts.h"
+#include "yaffscfg.h"
+#include "yportenv.h"
+
+/* XXX U-BOOT XXX */
+#if 0
+#include <string.h> // for memset
+#endif
+
+#define YAFFSFS_MAX_SYMLINK_DEREFERENCES 5
+
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+
+const char *yaffsfs_c_version="$Id: yaffsfs.c,v 1.18 2007/07/18 19:40:38 charles Exp $";
+
+// configurationList is the list of devices that are supported
+static yaffsfs_DeviceConfiguration *yaffsfs_configurationList;
+
+
+/* Some forward references */
+static yaffs_Object *yaffsfs_FindObject(yaffs_Object *relativeDirectory, const char *path, int symDepth);
+static void yaffsfs_RemoveObjectCallback(yaffs_Object *obj);
+
+
+// Handle management.
+//
+
+
+unsigned int yaffs_wr_attempts;
+
+typedef struct
+{
+ __u8 inUse:1; // this handle is in use
+ __u8 readOnly:1; // this handle is read only
+ __u8 append:1; // append only
+ __u8 exclusive:1; // exclusive
+ __u32 position; // current position in file
+ yaffs_Object *obj; // the object
+}yaffsfs_Handle;
+
+
+static yaffsfs_Handle yaffsfs_handle[YAFFSFS_N_HANDLES];
+
+// yaffsfs_InitHandle
+/// Inilitalise handles on start-up.
+//
+static int yaffsfs_InitHandles(void)
+{
+ int i;
+ for(i = 0; i < YAFFSFS_N_HANDLES; i++)
+ {
+ yaffsfs_handle[i].inUse = 0;
+ yaffsfs_handle[i].obj = NULL;
+ }
+ return 0;
+}
+
+yaffsfs_Handle *yaffsfs_GetHandlePointer(int h)
+{
+ if(h < 0 || h >= YAFFSFS_N_HANDLES)
+ {
+ return NULL;
+ }
+
+ return &yaffsfs_handle[h];
+}
+
+yaffs_Object *yaffsfs_GetHandleObject(int handle)
+{
+ yaffsfs_Handle *h = yaffsfs_GetHandlePointer(handle);
+
+ if(h && h->inUse)
+ {
+ return h->obj;
+ }
+
+ return NULL;
+}
+
+
+//yaffsfs_GetHandle
+// Grab a handle (when opening a file)
+//
+
+static int yaffsfs_GetHandle(void)
+{
+ int i;
+ yaffsfs_Handle *h;
+
+ for(i = 0; i < YAFFSFS_N_HANDLES; i++)
+ {
+ h = yaffsfs_GetHandlePointer(i);
+ if(!h)
+ {
+ // todo bug: should never happen
+ }
+ if(!h->inUse)
+ {
+ memset(h,0,sizeof(yaffsfs_Handle));
+ h->inUse=1;
+ return i;
+ }
+ }
+ return -1;
+}
+
+// yaffs_PutHandle
+// Let go of a handle (when closing a file)
+//
+static int yaffsfs_PutHandle(int handle)
+{
+ yaffsfs_Handle *h = yaffsfs_GetHandlePointer(handle);
+
+ if(h)
+ {
+ h->inUse = 0;
+ h->obj = NULL;
+ }
+ return 0;
+}
+
+
+
+// Stuff to search for a directory from a path
+
+
+int yaffsfs_Match(char a, char b)
+{
+ // case sensitive
+ return (a == b);
+}
+
+// yaffsfs_FindDevice
+// yaffsfs_FindRoot
+// Scan the configuration list to find the root.
+// Curveballs: Should match paths that end in '/' too
+// Curveball2 Might have "/x/ and "/x/y". Need to return the longest match
+static yaffs_Device *yaffsfs_FindDevice(const char *path, char **restOfPath)
+{
+ yaffsfs_DeviceConfiguration *cfg = yaffsfs_configurationList;
+ const char *leftOver;
+ const char *p;
+ yaffs_Device *retval = NULL;
+ int thisMatchLength;
+ int longestMatch = -1;
+
+ // Check all configs, choose the one that:
+ // 1) Actually matches a prefix (ie /a amd /abc will not match
+ // 2) Matches the longest.
+ while(cfg && cfg->prefix && cfg->dev)
+ {
+ leftOver = path;
+ p = cfg->prefix;
+ thisMatchLength = 0;
+
+ while(*p && //unmatched part of prefix
+ strcmp(p,"/") && // the rest of the prefix is not / (to catch / at end)
+ *leftOver &&
+ yaffsfs_Match(*p,*leftOver))
+ {
+ p++;
+ leftOver++;
+ thisMatchLength++;
+ }
+ if((!*p || strcmp(p,"/") == 0) && // end of prefix
+ (!*leftOver || *leftOver == '/') && // no more in this path name part
+ (thisMatchLength > longestMatch))
+ {
+ // Matched prefix
+ *restOfPath = (char *)leftOver;
+ retval = cfg->dev;
+ longestMatch = thisMatchLength;
+ }
+ cfg++;
+ }
+ return retval;
+}
+
+static yaffs_Object *yaffsfs_FindRoot(const char *path, char **restOfPath)
+{
+
+ yaffs_Device *dev;
+
+ dev= yaffsfs_FindDevice(path,restOfPath);
+ if(dev && dev->isMounted)
+ {
+ return dev->rootDir;
+ }
+ return NULL;
+}
+
+static yaffs_Object *yaffsfs_FollowLink(yaffs_Object *obj,int symDepth)
+{
+
+ while(obj && obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ {
+ char *alias = obj->variant.symLinkVariant.alias;
+
+ if(*alias == '/')
+ {
+ // Starts with a /, need to scan from root up
+ obj = yaffsfs_FindObject(NULL,alias,symDepth++);
+ }
+ else
+ {
+ // Relative to here, so use the parent of the symlink as a start
+ obj = yaffsfs_FindObject(obj->parent,alias,symDepth++);
+ }
+ }
+ return obj;
+}
+
+
+// yaffsfs_FindDirectory
+// Parse a path to determine the directory and the name within the directory.
+//
+// eg. "/data/xx/ff" --> puts name="ff" and returns the directory "/data/xx"
+static yaffs_Object *yaffsfs_DoFindDirectory(yaffs_Object *startDir,const char *path,char **name,int symDepth)
+{
+ yaffs_Object *dir;
+ char *restOfPath;
+ char str[YAFFS_MAX_NAME_LENGTH+1];
+ int i;
+
+ if(symDepth > YAFFSFS_MAX_SYMLINK_DEREFERENCES)
+ {
+ return NULL;
+ }
+
+ if(startDir)
+ {
+ dir = startDir;
+ restOfPath = (char *)path;
+ }
+ else
+ {
+ dir = yaffsfs_FindRoot(path,&restOfPath);
+ }
+
+ while(dir)
+ {
+ // parse off /.
+ // curve ball: also throw away surplus '/'
+ // eg. "/ram/x////ff" gets treated the same as "/ram/x/ff"
+ while(*restOfPath == '/')
+ {
+ restOfPath++; // get rid of '/'
+ }
+
+ *name = restOfPath;
+ i = 0;
+
+ while(*restOfPath && *restOfPath != '/')
+ {
+ if (i < YAFFS_MAX_NAME_LENGTH)
+ {
+ str[i] = *restOfPath;
+ str[i+1] = '\0';
+ i++;
+ }
+ restOfPath++;
+ }
+
+ if(!*restOfPath)
+ {
+ // got to the end of the string
+ return dir;
+ }
+ else
+ {
+ if(strcmp(str,".") == 0)
+ {
+ // Do nothing
+ }
+ else if(strcmp(str,"..") == 0)
+ {
+ dir = dir->parent;
+ }
+ else
+ {
+ dir = yaffs_FindObjectByName(dir,str);
+
+ while(dir && dir->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ {
+
+ dir = yaffsfs_FollowLink(dir,symDepth);
+
+ }
+
+ if(dir && dir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ dir = NULL;
+ }
+ }
+ }
+ }
+ // directory did not exist.
+ return NULL;
+}
+
+static yaffs_Object *yaffsfs_FindDirectory(yaffs_Object *relativeDirectory,const char *path,char **name,int symDepth)
+{
+ return yaffsfs_DoFindDirectory(relativeDirectory,path,name,symDepth);
+}
+
+// yaffsfs_FindObject turns a path for an existing object into the object
+//
+static yaffs_Object *yaffsfs_FindObject(yaffs_Object *relativeDirectory, const char *path,int symDepth)
+{
+ yaffs_Object *dir;
+ char *name;
+
+ dir = yaffsfs_FindDirectory(relativeDirectory,path,&name,symDepth);
+
+ if(dir && *name)
+ {
+ return yaffs_FindObjectByName(dir,name);
+ }
+
+ return dir;
+}
+
+
+
+int yaffs_open(const char *path, int oflag, int mode)
+{
+ yaffs_Object *obj = NULL;
+ yaffs_Object *dir = NULL;
+ char *name;
+ int handle = -1;
+ yaffsfs_Handle *h = NULL;
+ int alreadyOpen = 0;
+ int alreadyExclusive = 0;
+ int openDenied = 0;
+ int symDepth = 0;
+ int errorReported = 0;
+
+ int i;
+
+
+ // todo sanity check oflag (eg. can't have O_TRUNC without WRONLY or RDWR
+
+
+ yaffsfs_Lock();
+
+ handle = yaffsfs_GetHandle();
+
+ if(handle >= 0)
+ {
+
+ h = yaffsfs_GetHandlePointer(handle);
+
+
+ // try to find the exisiting object
+ obj = yaffsfs_FindObject(NULL,path,0);
+
+ if(obj && obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ {
+
+ obj = yaffsfs_FollowLink(obj,symDepth++);
+ }
+
+ if(obj)
+ {
+ // Check if the object is already in use
+ alreadyOpen = alreadyExclusive = 0;
+
+ for(i = 0; i <= YAFFSFS_N_HANDLES; i++)
+ {
+
+ if(i != handle &&
+ yaffsfs_handle[i].inUse &&
+ obj == yaffsfs_handle[i].obj)
+ {
+ alreadyOpen = 1;
+ if(yaffsfs_handle[i].exclusive)
+ {
+ alreadyExclusive = 1;
+ }
+ }
+ }
+
+ if(((oflag & O_EXCL) && alreadyOpen) || alreadyExclusive)
+ {
+ openDenied = 1;
+ }
+
+ // Open should fail if O_CREAT and O_EXCL are specified
+ if((oflag & O_EXCL) && (oflag & O_CREAT))
+ {
+ openDenied = 1;
+ yaffsfs_SetError(-EEXIST);
+ errorReported = 1;
+ }
+
+ // Check file permissions
+ if( (oflag & (O_RDWR | O_WRONLY)) == 0 && // ie O_RDONLY
+ !(obj->yst_mode & S_IREAD))
+ {
+ openDenied = 1;
+ }
+
+ if( (oflag & O_RDWR) &&
+ !(obj->yst_mode & S_IREAD))
+ {
+ openDenied = 1;
+ }
+
+ if( (oflag & (O_RDWR | O_WRONLY)) &&
+ !(obj->yst_mode & S_IWRITE))
+ {
+ openDenied = 1;
+ }
+
+ }
+
+ else if((oflag & O_CREAT))
+ {
+ // Let's see if we can create this file
+ dir = yaffsfs_FindDirectory(NULL,path,&name,0);
+ if(dir)
+ {
+ obj = yaffs_MknodFile(dir,name,mode,0,0);
+ }
+ else
+ {
+ yaffsfs_SetError(-ENOTDIR);
+ }
+ }
+
+ if(obj && !openDenied)
+ {
+ h->obj = obj;
+ h->inUse = 1;
+ h->readOnly = (oflag & (O_WRONLY | O_RDWR)) ? 0 : 1;
+ h->append = (oflag & O_APPEND) ? 1 : 0;
+ h->exclusive = (oflag & O_EXCL) ? 1 : 0;
+ h->position = 0;
+
+ obj->inUse++;
+ if((oflag & O_TRUNC) && !h->readOnly)
+ {
+ //todo truncate
+ yaffs_ResizeFile(obj,0);
+ }
+
+ }
+ else
+ {
+ yaffsfs_PutHandle(handle);
+ if(!errorReported)
+ {
+ yaffsfs_SetError(-EACCESS);
+ errorReported = 1;
+ }
+ handle = -1;
+ }
+
+ }
+
+ yaffsfs_Unlock();
+
+ return handle;
+}
+
+int yaffs_close(int fd)
+{
+ yaffsfs_Handle *h = NULL;
+ int retVal = 0;
+
+ yaffsfs_Lock();
+
+ h = yaffsfs_GetHandlePointer(fd);
+
+ if(h && h->inUse)
+ {
+ // clean up
+ yaffs_FlushFile(h->obj,1);
+ h->obj->inUse--;
+ if(h->obj->inUse <= 0 && h->obj->unlinked)
+ {
+ yaffs_DeleteFile(h->obj);
+ }
+ yaffsfs_PutHandle(fd);
+ retVal = 0;
+ }
+ else
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ retVal = -1;
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+}
+
+int yaffs_read(int fd, void *buf, unsigned int nbyte)
+{
+ yaffsfs_Handle *h = NULL;
+ yaffs_Object *obj = NULL;
+ int pos = 0;
+ int nRead = -1;
+ int maxRead;
+
+ yaffsfs_Lock();
+ h = yaffsfs_GetHandlePointer(fd);
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(!h || !obj)
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+ else if( h && obj)
+ {
+ pos= h->position;
+ if(yaffs_GetObjectFileLength(obj) > pos)
+ {
+ maxRead = yaffs_GetObjectFileLength(obj) - pos;
+ }
+ else
+ {
+ maxRead = 0;
+ }
+
+ if(nbyte > maxRead)
+ {
+ nbyte = maxRead;
+ }
+
+
+ if(nbyte > 0)
+ {
+ nRead = yaffs_ReadDataFromFile(obj,buf,pos,nbyte);
+ if(nRead >= 0)
+ {
+ h->position = pos + nRead;
+ }
+ else
+ {
+ //todo error
+ }
+ }
+ else
+ {
+ nRead = 0;
+ }
+
+ }
+
+ yaffsfs_Unlock();
+
+
+ return (nRead >= 0) ? nRead : -1;
+
+}
+
+int yaffs_write(int fd, const void *buf, unsigned int nbyte)
+{
+ yaffsfs_Handle *h = NULL;
+ yaffs_Object *obj = NULL;
+ int pos = 0;
+ int nWritten = -1;
+ int writeThrough = 0;
+
+ yaffsfs_Lock();
+ h = yaffsfs_GetHandlePointer(fd);
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(!h || !obj)
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+ else if( h && obj && h->readOnly)
+ {
+ // todo error
+ }
+ else if( h && obj)
+ {
+ if(h->append)
+ {
+ pos = yaffs_GetObjectFileLength(obj);
+ }
+ else
+ {
+ pos = h->position;
+ }
+
+ nWritten = yaffs_WriteDataToFile(obj,buf,pos,nbyte,writeThrough);
+
+ if(nWritten >= 0)
+ {
+ h->position = pos + nWritten;
+ }
+ else
+ {
+ //todo error
+ }
+
+ }
+
+ yaffsfs_Unlock();
+
+
+ return (nWritten >= 0) ? nWritten : -1;
+
+}
+
+int yaffs_truncate(int fd, off_t newSize)
+{
+ yaffsfs_Handle *h = NULL;
+ yaffs_Object *obj = NULL;
+ int result = 0;
+
+ yaffsfs_Lock();
+ h = yaffsfs_GetHandlePointer(fd);
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(!h || !obj)
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+ else
+ {
+ // resize the file
+ result = yaffs_ResizeFile(obj,newSize);
+ }
+ yaffsfs_Unlock();
+
+
+ return (result) ? 0 : -1;
+
+}
+
+off_t yaffs_lseek(int fd, off_t offset, int whence)
+{
+ yaffsfs_Handle *h = NULL;
+ yaffs_Object *obj = NULL;
+ int pos = -1;
+ int fSize = -1;
+
+ yaffsfs_Lock();
+ h = yaffsfs_GetHandlePointer(fd);
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(!h || !obj)
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+ else if(whence == SEEK_SET)
+ {
+ if(offset >= 0)
+ {
+ pos = offset;
+ }
+ }
+ else if(whence == SEEK_CUR)
+ {
+ if( (h->position + offset) >= 0)
+ {
+ pos = (h->position + offset);
+ }
+ }
+ else if(whence == SEEK_END)
+ {
+ fSize = yaffs_GetObjectFileLength(obj);
+ if(fSize >= 0 && (fSize + offset) >= 0)
+ {
+ pos = fSize + offset;
+ }
+ }
+
+ if(pos >= 0)
+ {
+ h->position = pos;
+ }
+ else
+ {
+ // todo error
+ }
+
+
+ yaffsfs_Unlock();
+
+ return pos;
+}
+
+
+int yaffsfs_DoUnlink(const char *path,int isDirectory)
+{
+ yaffs_Object *dir = NULL;
+ yaffs_Object *obj = NULL;
+ char *name;
+ int result = YAFFS_FAIL;
+
+ yaffsfs_Lock();
+
+ obj = yaffsfs_FindObject(NULL,path,0);
+ dir = yaffsfs_FindDirectory(NULL,path,&name,0);
+ if(!dir)
+ {
+ yaffsfs_SetError(-ENOTDIR);
+ }
+ else if(!obj)
+ {
+ yaffsfs_SetError(-ENOENT);
+ }
+ else if(!isDirectory && obj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ yaffsfs_SetError(-EISDIR);
+ }
+ else if(isDirectory && obj->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ yaffsfs_SetError(-ENOTDIR);
+ }
+ else
+ {
+ result = yaffs_Unlink(dir,name);
+
+ if(result == YAFFS_FAIL && isDirectory)
+ {
+ yaffsfs_SetError(-ENOTEMPTY);
+ }
+ }
+
+ yaffsfs_Unlock();
+
+ // todo error
+
+ return (result == YAFFS_FAIL) ? -1 : 0;
+}
+int yaffs_rmdir(const char *path)
+{
+ return yaffsfs_DoUnlink(path,1);
+}
+
+int yaffs_unlink(const char *path)
+{
+ return yaffsfs_DoUnlink(path,0);
+}
+
+int yaffs_rename(const char *oldPath, const char *newPath)
+{
+ yaffs_Object *olddir = NULL;
+ yaffs_Object *newdir = NULL;
+ yaffs_Object *obj = NULL;
+ char *oldname;
+ char *newname;
+ int result= YAFFS_FAIL;
+ int renameAllowed = 1;
+
+ yaffsfs_Lock();
+
+ olddir = yaffsfs_FindDirectory(NULL,oldPath,&oldname,0);
+ newdir = yaffsfs_FindDirectory(NULL,newPath,&newname,0);
+ obj = yaffsfs_FindObject(NULL,oldPath,0);
+
+ if(!olddir || !newdir || !obj)
+ {
+ // bad file
+ yaffsfs_SetError(-EBADF);
+ renameAllowed = 0;
+ }
+ else if(olddir->myDev != newdir->myDev)
+ {
+ // oops must be on same device
+ // todo error
+ yaffsfs_SetError(-EXDEV);
+ renameAllowed = 0;
+ }
+ else if(obj && obj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ // It is a directory, check that it is not being renamed to
+ // being its own decendent.
+ // Do this by tracing from the new directory back to the root, checking for obj
+
+ yaffs_Object *xx = newdir;
+
+ while( renameAllowed && xx)
+ {
+ if(xx == obj)
+ {
+ renameAllowed = 0;
+ }
+ xx = xx->parent;
+ }
+ if(!renameAllowed) yaffsfs_SetError(-EACCESS);
+ }
+
+ if(renameAllowed)
+ {
+ result = yaffs_RenameObject(olddir,oldname,newdir,newname);
+ }
+
+ yaffsfs_Unlock();
+
+ return (result == YAFFS_FAIL) ? -1 : 0;
+}
+
+
+static int yaffsfs_DoStat(yaffs_Object *obj,struct yaffs_stat *buf)
+{
+ int retVal = -1;
+
+ if(obj)
+ {
+ obj = yaffs_GetEquivalentObject(obj);
+ }
+
+ if(obj && buf)
+ {
+ buf->st_dev = (int)obj->myDev->genericDevice;
+ buf->st_ino = obj->objectId;
+ buf->st_mode = obj->yst_mode & ~S_IFMT; // clear out file type bits
+
+ if(obj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+ buf->st_mode |= S_IFDIR;
+ }
+ else if(obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ {
+ buf->st_mode |= S_IFLNK;
+ }
+ else if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ {
+ buf->st_mode |= S_IFREG;
+ }
+
+ buf->st_nlink = yaffs_GetObjectLinkCount(obj);
+ buf->st_uid = 0;
+ buf->st_gid = 0;;
+ buf->st_rdev = obj->yst_rdev;
+ buf->st_size = yaffs_GetObjectFileLength(obj);
+ buf->st_blksize = obj->myDev->nDataBytesPerChunk;
+ buf->st_blocks = (buf->st_size + buf->st_blksize -1)/buf->st_blksize;
+ buf->yst_atime = obj->yst_atime;
+ buf->yst_ctime = obj->yst_ctime;
+ buf->yst_mtime = obj->yst_mtime;
+ retVal = 0;
+ }
+ return retVal;
+}
+
+static int yaffsfs_DoStatOrLStat(const char *path, struct yaffs_stat *buf,int doLStat)
+{
+ yaffs_Object *obj;
+
+ int retVal = -1;
+
+ yaffsfs_Lock();
+ obj = yaffsfs_FindObject(NULL,path,0);
+
+ if(!doLStat && obj)
+ {
+ obj = yaffsfs_FollowLink(obj,0);
+ }
+
+ if(obj)
+ {
+ retVal = yaffsfs_DoStat(obj,buf);
+ }
+ else
+ {
+ // todo error not found
+ yaffsfs_SetError(-ENOENT);
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+
+}
+
+int yaffs_stat(const char *path, struct yaffs_stat *buf)
+{
+ return yaffsfs_DoStatOrLStat(path,buf,0);
+}
+
+int yaffs_lstat(const char *path, struct yaffs_stat *buf)
+{
+ return yaffsfs_DoStatOrLStat(path,buf,1);
+}
+
+int yaffs_fstat(int fd, struct yaffs_stat *buf)
+{
+ yaffs_Object *obj;
+
+ int retVal = -1;
+
+ yaffsfs_Lock();
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(obj)
+ {
+ retVal = yaffsfs_DoStat(obj,buf);
+ }
+ else
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+}
+
+static int yaffsfs_DoChMod(yaffs_Object *obj,mode_t mode)
+{
+ int result = YAFFS_FAIL;
+
+ if(obj)
+ {
+ obj = yaffs_GetEquivalentObject(obj);
+ }
+
+ if(obj)
+ {
+ obj->yst_mode = mode;
+ obj->dirty = 1;
+ result = yaffs_FlushFile(obj,0);
+ }
+
+ return result == YAFFS_OK ? 0 : -1;
+}
+
+
+int yaffs_chmod(const char *path, mode_t mode)
+{
+ yaffs_Object *obj;
+
+ int retVal = -1;
+
+ yaffsfs_Lock();
+ obj = yaffsfs_FindObject(NULL,path,0);
+
+ if(obj)
+ {
+ retVal = yaffsfs_DoChMod(obj,mode);
+ }
+ else
+ {
+ // todo error not found
+ yaffsfs_SetError(-ENOENT);
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+
+}
+
+
+int yaffs_fchmod(int fd, mode_t mode)
+{
+ yaffs_Object *obj;
+
+ int retVal = -1;
+
+ yaffsfs_Lock();
+ obj = yaffsfs_GetHandleObject(fd);
+
+ if(obj)
+ {
+ retVal = yaffsfs_DoChMod(obj,mode);
+ }
+ else
+ {
+ // bad handle
+ yaffsfs_SetError(-EBADF);
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+}
+
+
+int yaffs_mkdir(const char *path, mode_t mode)
+{
+ yaffs_Object *parent = NULL;
+ yaffs_Object *dir = NULL;
+ char *name;
+ int retVal= -1;
+
+ yaffsfs_Lock();
+ parent = yaffsfs_FindDirectory(NULL,path,&name,0);
+ if(parent)
+ dir = yaffs_MknodDirectory(parent,name,mode,0,0);
+ if(dir)
+ {
+ retVal = 0;
+ }
+ else
+ {
+ yaffsfs_SetError(-ENOSPC); // just assume no space for now
+ retVal = -1;
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+}
+
+int yaffs_mount(const char *path)
+{
+ int retVal=-1;
+ int result=YAFFS_FAIL;
+ yaffs_Device *dev=NULL;
+ char *dummy;
+
+ T(YAFFS_TRACE_ALWAYS,("yaffs: Mounting %s\n",path));
+
+ yaffsfs_Lock();
+ dev = yaffsfs_FindDevice(path,&dummy);
+ if(dev)
+ {
+ if(!dev->isMounted)
+ {
+ result = yaffs_GutsInitialise(dev);
+ if(result == YAFFS_FAIL)
+ {
+ // todo error - mount failed
+ yaffsfs_SetError(-ENOMEM);
+ }
+ retVal = result ? 0 : -1;
+
+ }
+ else
+ {
+ //todo error - already mounted.
+ yaffsfs_SetError(-EBUSY);
+ }
+ }
+ else
+ {
+ // todo error - no device
+ yaffsfs_SetError(-ENODEV);
+ }
+ yaffsfs_Unlock();
+ return retVal;
+
+}
+
+int yaffs_unmount(const char *path)
+{
+ int retVal=-1;
+ yaffs_Device *dev=NULL;
+ char *dummy;
+
+ yaffsfs_Lock();
+ dev = yaffsfs_FindDevice(path,&dummy);
+ if(dev)
+ {
+ if(dev->isMounted)
+ {
+ int i;
+ int inUse;
+
+ yaffs_FlushEntireDeviceCache(dev);
+ yaffs_CheckpointSave(dev);
+
+ for(i = inUse = 0; i < YAFFSFS_N_HANDLES && !inUse; i++)
+ {
+ if(yaffsfs_handle[i].inUse && yaffsfs_handle[i].obj->myDev == dev)
+ {
+ inUse = 1; // the device is in use, can't unmount
+ }
+ }
+
+ if(!inUse)
+ {
+ yaffs_Deinitialise(dev);
+
+ retVal = 0;
+ }
+ else
+ {
+ // todo error can't unmount as files are open
+ yaffsfs_SetError(-EBUSY);
+ }
+
+ }
+ else
+ {
+ //todo error - not mounted.
+ yaffsfs_SetError(-EINVAL);
+
+ }
+ }
+ else
+ {
+ // todo error - no device
+ yaffsfs_SetError(-ENODEV);
+ }
+ yaffsfs_Unlock();
+ return retVal;
+
+}
+
+loff_t yaffs_freespace(const char *path)
+{
+ loff_t retVal=-1;
+ yaffs_Device *dev=NULL;
+ char *dummy;
+
+ yaffsfs_Lock();
+ dev = yaffsfs_FindDevice(path,&dummy);
+ if(dev && dev->isMounted)
+ {
+ retVal = yaffs_GetNumberOfFreeChunks(dev);
+ retVal *= dev->nDataBytesPerChunk;
+
+ }
+ else
+ {
+ yaffsfs_SetError(-EINVAL);
+ }
+
+ yaffsfs_Unlock();
+ return retVal;
+}
+
+
+
+void yaffs_initialise(yaffsfs_DeviceConfiguration *cfgList)
+{
+
+ yaffsfs_DeviceConfiguration *cfg;
+
+ yaffsfs_configurationList = cfgList;
+
+ yaffsfs_InitHandles();
+
+ cfg = yaffsfs_configurationList;
+
+ while(cfg && cfg->prefix && cfg->dev)
+ {
+ cfg->dev->isMounted = 0;
+ cfg->dev->removeObjectCallback = yaffsfs_RemoveObjectCallback;
+ cfg++;
+ }
+}
+
+
+//
+// Directory search stuff.
+
+//
+// Directory search context
+//
+// NB this is an opaque structure.
+
+
+typedef struct
+{
+ __u32 magic;
+ yaffs_dirent de; /* directory entry being used by this dsc */
+ char name[NAME_MAX+1]; /* name of directory being searched */
+ yaffs_Object *dirObj; /* ptr to directory being searched */
+ yaffs_Object *nextReturn; /* obj to be returned by next readddir */
+ int offset;
+ struct list_head others;
+} yaffsfs_DirectorySearchContext;
+
+
+
+static struct list_head search_contexts;
+
+
+static void yaffsfs_SetDirRewound(yaffsfs_DirectorySearchContext *dsc)
+{
+ if(dsc &&
+ dsc->dirObj &&
+ dsc->dirObj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY){
+
+ dsc->offset = 0;
+
+ if( list_empty(&dsc->dirObj->variant.directoryVariant.children)){
+ dsc->nextReturn = NULL;
+ } else {
+ dsc->nextReturn = list_entry(dsc->dirObj->variant.directoryVariant.children.next,
+ yaffs_Object,siblings);
+ }
+ } else {
+ /* Hey someone isn't playing nice! */
+ }
+}
+
+static void yaffsfs_DirAdvance(yaffsfs_DirectorySearchContext *dsc)
+{
+ if(dsc &&
+ dsc->dirObj &&
+ dsc->dirObj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY){
+
+ if( dsc->nextReturn == NULL ||
+ list_empty(&dsc->dirObj->variant.directoryVariant.children)){
+ dsc->nextReturn = NULL;
+ } else {
+ struct list_head *next = dsc->nextReturn->siblings.next;
+
+ if( next == &dsc->dirObj->variant.directoryVariant.children)
+ dsc->nextReturn = NULL; /* end of list */
+ else
+ dsc->nextReturn = list_entry(next,yaffs_Object,siblings);
+ }
+ } else {
+ /* Hey someone isn't playing nice! */
+ }
+}
+
+static void yaffsfs_RemoveObjectCallback(yaffs_Object *obj)
+{
+
+ struct list_head *i;
+ yaffsfs_DirectorySearchContext *dsc;
+
+ /* if search contexts not initilised then skip */
+ if(!search_contexts.next)
+ return;
+
+ /* Iteratethrough the directory search contexts.
+ * If any are the one being removed, then advance the dsc to
+ * the next one to prevent a hanging ptr.
+ */
+ list_for_each(i, &search_contexts) {
+ if (i) {
+ dsc = list_entry(i, yaffsfs_DirectorySearchContext,others);
+ if(dsc->nextReturn == obj)
+ yaffsfs_DirAdvance(dsc);
+ }
+ }
+
+}
+
+yaffs_DIR *yaffs_opendir(const char *dirname)
+{
+ yaffs_DIR *dir = NULL;
+ yaffs_Object *obj = NULL;
+ yaffsfs_DirectorySearchContext *dsc = NULL;
+
+ yaffsfs_Lock();
+
+ obj = yaffsfs_FindObject(NULL,dirname,0);
+
+ if(obj && obj->variantType == YAFFS_OBJECT_TYPE_DIRECTORY)
+ {
+
+ dsc = YMALLOC(sizeof(yaffsfs_DirectorySearchContext));
+ dir = (yaffs_DIR *)dsc;
+ if(dsc)
+ {
+ memset(dsc,0,sizeof(yaffsfs_DirectorySearchContext));
+ dsc->magic = YAFFS_MAGIC;
+ dsc->dirObj = obj;
+ strncpy(dsc->name,dirname,NAME_MAX);
+ INIT_LIST_HEAD(&dsc->others);
+
+ if(!search_contexts.next)
+ INIT_LIST_HEAD(&search_contexts);
+
+ list_add(&dsc->others,&search_contexts);
+ yaffsfs_SetDirRewound(dsc); }
+
+ }
+
+ yaffsfs_Unlock();
+
+ return dir;
+}
+
+struct yaffs_dirent *yaffs_readdir(yaffs_DIR *dirp)
+{
+ yaffsfs_DirectorySearchContext *dsc = (yaffsfs_DirectorySearchContext *)dirp;
+ struct yaffs_dirent *retVal = NULL;
+
+ yaffsfs_Lock();
+
+ if(dsc && dsc->magic == YAFFS_MAGIC){
+ yaffsfs_SetError(0);
+ if(dsc->nextReturn){
+ dsc->de.d_ino = yaffs_GetEquivalentObject(dsc->nextReturn)->objectId;
+ dsc->de.d_dont_use = (unsigned)dsc->nextReturn;
+ dsc->de.d_off = dsc->offset++;
+ yaffs_GetObjectName(dsc->nextReturn,dsc->de.d_name,NAME_MAX);
+ if(strlen(dsc->de.d_name) == 0)
+ {
+ // this should not happen!
+ strcpy(dsc->de.d_name,"zz");
+ }
+ dsc->de.d_reclen = sizeof(struct yaffs_dirent);
+ retVal = &dsc->de;
+ yaffsfs_DirAdvance(dsc);
+ } else
+ retVal = NULL;
+ }
+ else
+ {
+ yaffsfs_SetError(-EBADF);
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+
+}
+
+
+void yaffs_rewinddir(yaffs_DIR *dirp)
+{
+ yaffsfs_DirectorySearchContext *dsc = (yaffsfs_DirectorySearchContext *)dirp;
+
+ yaffsfs_Lock();
+
+ yaffsfs_SetDirRewound(dsc);
+
+ yaffsfs_Unlock();
+}
+
+
+int yaffs_closedir(yaffs_DIR *dirp)
+{
+ yaffsfs_DirectorySearchContext *dsc = (yaffsfs_DirectorySearchContext *)dirp;
+
+ yaffsfs_Lock();
+ dsc->magic = 0;
+ list_del(&dsc->others); /* unhook from list */
+ YFREE(dsc);
+ yaffsfs_Unlock();
+ return 0;
+}
+
+// end of directory stuff
+
+
+int yaffs_symlink(const char *oldpath, const char *newpath)
+{
+ yaffs_Object *parent = NULL;
+ yaffs_Object *obj;
+ char *name;
+ int retVal= -1;
+ int mode = 0; // ignore for now
+
+ yaffsfs_Lock();
+ parent = yaffsfs_FindDirectory(NULL,newpath,&name,0);
+ obj = yaffs_MknodSymLink(parent,name,mode,0,0,oldpath);
+ if(obj)
+ {
+ retVal = 0;
+ }
+ else
+ {
+ yaffsfs_SetError(-ENOSPC); // just assume no space for now
+ retVal = -1;
+ }
+
+ yaffsfs_Unlock();
+
+ return retVal;
+
+}
+
+int yaffs_readlink(const char *path, char *buf, int bufsiz)
+{
+ yaffs_Object *obj = NULL;
+ int retVal;
+
+
+ yaffsfs_Lock();
+
+ obj = yaffsfs_FindObject(NULL,path,0);
+
+ if(!obj)
+ {
+ yaffsfs_SetError(-ENOENT);
+ retVal = -1;
+ }
+ else if(obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK)
+ {
+ yaffsfs_SetError(-EINVAL);
+ retVal = -1;
+ }
+ else
+ {
+ char *alias = obj->variant.symLinkVariant.alias;
+ memset(buf,0,bufsiz);
+ strncpy(buf,alias,bufsiz - 1);
+ retVal = 0;
+ }
+ yaffsfs_Unlock();
+ return retVal;
+}
+
+int yaffs_link(const char *oldpath, const char *newpath)
+{
+ // Creates a link called newpath to existing oldpath
+ yaffs_Object *obj = NULL;
+ yaffs_Object *target = NULL;
+ int retVal = 0;
+
+
+ yaffsfs_Lock();
+
+ obj = yaffsfs_FindObject(NULL,oldpath,0);
+ target = yaffsfs_FindObject(NULL,newpath,0);
+
+ if(!obj)
+ {
+ yaffsfs_SetError(-ENOENT);
+ retVal = -1;
+ }
+ else if(target)
+ {
+ yaffsfs_SetError(-EEXIST);
+ retVal = -1;
+ }
+ else
+ {
+ yaffs_Object *newdir = NULL;
+ yaffs_Object *link = NULL;
+
+ char *newname;
+
+ newdir = yaffsfs_FindDirectory(NULL,newpath,&newname,0);
+
+ if(!newdir)
+ {
+ yaffsfs_SetError(-ENOTDIR);
+ retVal = -1;
+ }
+ else if(newdir->myDev != obj->myDev)
+ {
+ yaffsfs_SetError(-EXDEV);
+ retVal = -1;
+ }
+ if(newdir && strlen(newname) > 0)
+ {
+ link = yaffs_Link(newdir,newname,obj);
+ if(link)
+ retVal = 0;
+ else
+ {
+ yaffsfs_SetError(-ENOSPC);
+ retVal = -1;
+ }
+
+ }
+ }
+ yaffsfs_Unlock();
+
+ return retVal;
+}
+
+int yaffs_mknod(const char *pathname, mode_t mode, dev_t dev);
+
+int yaffs_DumpDevStruct(const char *path)
+{
+ char *rest;
+
+ yaffs_Object *obj = yaffsfs_FindRoot(path,&rest);
+
+ if(obj)
+ {
+ yaffs_Device *dev = obj->myDev;
+
+ printf("\n"
+ "nPageWrites.......... %d\n"
+ "nPageReads........... %d\n"
+ "nBlockErasures....... %d\n"
+ "nGCCopies............ %d\n"
+ "garbageCollections... %d\n"
+ "passiveGarbageColl'ns %d\n"
+ "\n",
+ dev->nPageWrites,
+ dev->nPageReads,
+ dev->nBlockErasures,
+ dev->nGCCopies,
+ dev->garbageCollections,
+ dev->passiveGarbageCollections
+ );
+
+ }
+ return 0;
+}
diff --git a/fs/yaffs2/yaffsfs.h b/fs/yaffs2/yaffsfs.h
new file mode 100644
index 0000000..9afe60a
--- /dev/null
+++ b/fs/yaffs2/yaffsfs.h
@@ -0,0 +1,233 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * Header file for using yaffs in an application via
+ * a direct interface.
+ */
+
+
+#ifndef __YAFFSFS_H__
+#define __YAFFSFS_H__
+
+#include "yaffscfg.h"
+#include "yportenv.h"
+
+
+//typedef long off_t;
+//typedef long dev_t;
+//typedef unsigned long mode_t;
+
+
+#ifndef NAME_MAX
+#define NAME_MAX 256
+#endif
+
+#ifndef O_RDONLY
+#define O_RDONLY 00
+#endif
+
+#ifndef O_WRONLY
+#define O_WRONLY 01
+#endif
+
+#ifndef O_RDWR
+#define O_RDWR 02
+#endif
+
+#ifndef O_CREAT
+#define O_CREAT 0100
+#endif
+
+#ifndef O_EXCL
+#define O_EXCL 0200
+#endif
+
+#ifndef O_TRUNC
+#define O_TRUNC 01000
+#endif
+
+#ifndef O_APPEND
+#define O_APPEND 02000
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET 0
+#endif
+
+#ifndef SEEK_CUR
+#define SEEK_CUR 1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END 2
+#endif
+
+#ifndef EBUSY
+#define EBUSY 16
+#endif
+
+#ifndef ENODEV
+#define ENODEV 19
+#endif
+
+#ifndef EINVAL
+#define EINVAL 22
+#endif
+
+#ifndef EBADF
+#define EBADF 9
+#endif
+
+#ifndef EACCESS
+#define EACCESS 13
+#endif
+
+#ifndef EXDEV
+#define EXDEV 18
+#endif
+
+#ifndef ENOENT
+#define ENOENT 2
+#endif
+
+#ifndef ENOSPC
+#define ENOSPC 28
+#endif
+
+#ifndef ENOTEMPTY
+#define ENOTEMPTY 39
+#endif
+
+#ifndef ENOMEM
+#define ENOMEM 12
+#endif
+
+#ifndef EEXIST
+#define EEXIST 17
+#endif
+
+#ifndef ENOTDIR
+#define ENOTDIR 20
+#endif
+
+#ifndef EISDIR
+#define EISDIR 21
+#endif
+
+
+// Mode flags
+
+#ifndef S_IFMT
+#define S_IFMT 0170000
+#endif
+
+#ifndef S_IFLNK
+#define S_IFLNK 0120000
+#endif
+
+#ifndef S_IFDIR
+#define S_IFDIR 0040000
+#endif
+
+#ifndef S_IFREG
+#define S_IFREG 0100000
+#endif
+
+#ifndef S_IREAD
+#define S_IREAD 0000400
+#endif
+
+#ifndef S_IWRITE
+#define S_IWRITE 0000200
+#endif
+
+
+
+
+struct yaffs_dirent{
+ long d_ino; /* inode number */
+ off_t d_off; /* offset to this dirent */
+ unsigned short d_reclen; /* length of this d_name */
+ char d_name [NAME_MAX+1]; /* file name (null-terminated) */
+ unsigned d_dont_use; /* debug pointer, not for public consumption */
+};
+
+typedef struct yaffs_dirent yaffs_dirent;
+
+
+typedef struct __opaque yaffs_DIR;
+
+
+
+struct yaffs_stat{
+ int st_dev; /* device */
+ int st_ino; /* inode */
+ mode_t st_mode; /* protection */
+ int st_nlink; /* number of hard links */
+ int st_uid; /* user ID of owner */
+ int st_gid; /* group ID of owner */
+ unsigned st_rdev; /* device type (if inode device) */
+ off_t st_size; /* total size, in bytes */
+ unsigned long st_blksize; /* blocksize for filesystem I/O */
+ unsigned long st_blocks; /* number of blocks allocated */
+ unsigned long yst_atime; /* time of last access */
+ unsigned long yst_mtime; /* time of last modification */
+ unsigned long yst_ctime; /* time of last change */
+};
+
+int yaffs_open(const char *path, int oflag, int mode) ;
+int yaffs_read(int fd, void *buf, unsigned int nbyte) ;
+int yaffs_write(int fd, const void *buf, unsigned int nbyte) ;
+int yaffs_close(int fd) ;
+off_t yaffs_lseek(int fd, off_t offset, int whence) ;
+int yaffs_truncate(int fd, off_t newSize);
+
+int yaffs_unlink(const char *path) ;
+int yaffs_rename(const char *oldPath, const char *newPath) ;
+
+int yaffs_stat(const char *path, struct yaffs_stat *buf) ;
+int yaffs_lstat(const char *path, struct yaffs_stat *buf) ;
+int yaffs_fstat(int fd, struct yaffs_stat *buf) ;
+
+int yaffs_chmod(const char *path, mode_t mode);
+int yaffs_fchmod(int fd, mode_t mode);
+
+int yaffs_mkdir(const char *path, mode_t mode) ;
+int yaffs_rmdir(const char *path) ;
+
+yaffs_DIR *yaffs_opendir(const char *dirname) ;
+struct yaffs_dirent *yaffs_readdir(yaffs_DIR *dirp) ;
+void yaffs_rewinddir(yaffs_DIR *dirp) ;
+int yaffs_closedir(yaffs_DIR *dirp) ;
+
+int yaffs_mount(const char *path) ;
+int yaffs_unmount(const char *path) ;
+
+int yaffs_symlink(const char *oldpath, const char *newpath);
+int yaffs_readlink(const char *path, char *buf, int bufsiz);
+
+int yaffs_link(const char *oldpath, const char *newpath);
+int yaffs_mknod(const char *pathname, mode_t mode, dev_t dev);
+
+loff_t yaffs_freespace(const char *path);
+
+void yaffs_initialise(yaffsfs_DeviceConfiguration *configList);
+
+int yaffs_StartUp(void);
+
+#endif
+
+
diff --git a/fs/yaffs2/yaffsinterface.h b/fs/yaffs2/yaffsinterface.h
new file mode 100644
index 0000000..0cfdfcf
--- /dev/null
+++ b/fs/yaffs2/yaffsinterface.h
@@ -0,0 +1,21 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFSINTERFACE_H__
+#define __YAFFSINTERFACE_H__
+
+int yaffs_Initialise(unsigned nBlocks);
+
+#endif
diff --git a/fs/yaffs2/ydirectenv.h b/fs/yaffs2/ydirectenv.h
new file mode 100644
index 0000000..adcc0b5
--- /dev/null
+++ b/fs/yaffs2/ydirectenv.h
@@ -0,0 +1,94 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * ydirectenv.h: Environment wrappers for YAFFS direct.
+ */
+
+#ifndef __YDIRECTENV_H__
+#define __YDIRECTENV_H__
+
+// Direct interface
+
+#include "devextras.h"
+
+/* XXX U-BOOT XXX */
+#if 0
+#include "stdlib.h"
+#include "stdio.h"
+#include "string.h"
+#include "assert.h"
+#endif
+#include "yaffs_malloc.h"
+
+/* XXX U-BOOT XXX */
+#if 0
+#define YBUG() assert(1)
+#endif
+
+#define YCHAR char
+#define YUCHAR unsigned char
+#define _Y(x) x
+#define yaffs_strcpy(a,b) strcpy(a,b)
+#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+#define yaffs_strlen(s) strlen(s)
+#define yaffs_sprintf sprintf
+#define yaffs_toupper(a) toupper(a)
+
+#ifdef NO_Y_INLINE
+#define Y_INLINE
+#else
+#define Y_INLINE inline
+#endif
+
+#define YMALLOC(x) yaffs_malloc(x)
+#define YFREE(x) free(x)
+#define YMALLOC_ALT(x) yaffs_malloc(x)
+#define YFREE_ALT(x) free(x)
+
+#define YMALLOC_DMA(x) yaffs_malloc(x)
+
+#define YYIELD() do {} while(0)
+
+
+
+//#define YINFO(s) YPRINTF(( __FILE__ " %d %s\n",__LINE__,s))
+//#define YALERT(s) YINFO(s)
+
+
+#define TENDSTR "\n"
+#define TSTR(x) x
+#define TOUT(p) printf p
+
+
+#define YAFFS_LOSTNFOUND_NAME "lost+found"
+#define YAFFS_LOSTNFOUND_PREFIX "obj"
+//#define YPRINTF(x) printf x
+
+#include "yaffscfg.h"
+
+#define Y_CURRENT_TIME yaffsfs_CurrentTime()
+#define Y_TIME_CONVERT(x) x
+
+#define YAFFS_ROOT_MODE 0666
+#define YAFFS_LOSTNFOUND_MODE 0666
+
+#define yaffs_SumCompare(x,y) ((x) == (y))
+#define yaffs_strcmp(a,b) strcmp(a,b)
+
+#endif
+
+
diff --git a/fs/yaffs2/yportenv.h b/fs/yaffs2/yportenv.h
new file mode 100644
index 0000000..b316b16
--- /dev/null
+++ b/fs/yaffs2/yportenv.h
@@ -0,0 +1,193 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ * for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YPORTENV_H__
+#define __YPORTENV_H__
+
+/* XXX U-BOOT XXX */
+#ifndef CONFIG_YAFFS_DIRECT
+#define CONFIG_YAFFS_DIRECT
+#endif
+
+#if defined CONFIG_YAFFS_WINCE
+
+#include "ywinceenv.h"
+
+/* XXX U-BOOT XXX */
+#elif 0 /* defined __KERNEL__ */
+
+#include "moduleconfig.h"
+
+/* Linux kernel */
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+#include <linux/config.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#define YCHAR char
+#define YUCHAR unsigned char
+#define _Y(x) x
+#define yaffs_strcpy(a,b) strcpy(a,b)
+#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+#define yaffs_strlen(s) strlen(s)
+#define yaffs_sprintf sprintf
+#define yaffs_toupper(a) toupper(a)
+
+#define Y_INLINE inline
+
+#define YAFFS_LOSTNFOUND_NAME "lost+found"
+#define YAFFS_LOSTNFOUND_PREFIX "obj"
+
+/* #define YPRINTF(x) printk x */
+#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
+#define YFREE(x) kfree(x)
+#define YMALLOC_ALT(x) vmalloc(x)
+#define YFREE_ALT(x) vfree(x)
+#define YMALLOC_DMA(x) YMALLOC(x)
+
+// KR - added for use in scan so processes aren't blocked indefinitely.
+#define YYIELD() schedule()
+
+#define YAFFS_ROOT_MODE 0666
+#define YAFFS_LOSTNFOUND_MODE 0666
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+#define Y_TIME_CONVERT(x) (x).tv_sec
+#else
+#define Y_CURRENT_TIME CURRENT_TIME
+#define Y_TIME_CONVERT(x) (x)
+#endif
+
+#define yaffs_SumCompare(x,y) ((x) == (y))
+#define yaffs_strcmp(a,b) strcmp(a,b)
+
+#define TENDSTR "\n"
+#define TSTR(x) KERN_WARNING x
+#define TOUT(p) printk p
+
+#define yaffs_trace(mask, fmt, args...) \
+ do { if ((mask) & (yaffs_traceMask|YAFFS_TRACE_ERROR)) \
+ printk(KERN_WARNING "yaffs: " fmt, ## args); \
+ } while (0)
+
+#define compile_time_assertion(assertion) \
+ ({ int x = __builtin_choose_expr(assertion, 0, (void)0); (void) x; })
+
+#elif defined CONFIG_YAFFS_DIRECT
+
+/* Direct interface */
+#include "ydirectenv.h"
+
+#elif defined CONFIG_YAFFS_UTIL
+
+/* Stuff for YAFFS utilities */
+
+#include "stdlib.h"
+#include "stdio.h"
+#include "string.h"
+
+#include "devextras.h"
+
+#define YMALLOC(x) malloc(x)
+#define YFREE(x) free(x)
+#define YMALLOC_ALT(x) malloc(x)
+#define YFREE_ALT(x) free(x)
+
+#define YCHAR char
+#define YUCHAR unsigned char
+#define _Y(x) x
+#define yaffs_strcpy(a,b) strcpy(a,b)
+#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+#define yaffs_strlen(s) strlen(s)
+#define yaffs_sprintf sprintf
+#define yaffs_toupper(a) toupper(a)
+
+#define Y_INLINE inline
+
+/* #define YINFO(s) YPRINTF(( __FILE__ " %d %s\n",__LINE__,s)) */
+/* #define YALERT(s) YINFO(s) */
+
+#define TENDSTR "\n"
+#define TSTR(x) x
+#define TOUT(p) printf p
+
+#define YAFFS_LOSTNFOUND_NAME "lost+found"
+#define YAFFS_LOSTNFOUND_PREFIX "obj"
+/* #define YPRINTF(x) printf x */
+
+#define YAFFS_ROOT_MODE 0666
+#define YAFFS_LOSTNFOUND_MODE 0666
+
+#define yaffs_SumCompare(x,y) ((x) == (y))
+#define yaffs_strcmp(a,b) strcmp(a,b)
+
+#else
+/* Should have specified a configuration type */
+#error Unknown configuration
+
+#endif
+
+/* see yaffs_fs.c */
+extern unsigned int yaffs_traceMask;
+extern unsigned int yaffs_wr_attempts;
+
+/*
+ * Tracing flags.
+ * The flags masked in YAFFS_TRACE_ALWAYS are always traced.
+ */
+
+#define YAFFS_TRACE_OS 0x00000002
+#define YAFFS_TRACE_ALLOCATE 0x00000004
+#define YAFFS_TRACE_SCAN 0x00000008
+#define YAFFS_TRACE_BAD_BLOCKS 0x00000010
+#define YAFFS_TRACE_ERASE 0x00000020
+#define YAFFS_TRACE_GC 0x00000040
+#define YAFFS_TRACE_WRITE 0x00000080
+#define YAFFS_TRACE_TRACING 0x00000100
+#define YAFFS_TRACE_DELETION 0x00000200
+#define YAFFS_TRACE_BUFFERS 0x00000400
+#define YAFFS_TRACE_NANDACCESS 0x00000800
+#define YAFFS_TRACE_GC_DETAIL 0x00001000
+#define YAFFS_TRACE_SCAN_DEBUG 0x00002000
+#define YAFFS_TRACE_MTD 0x00004000
+#define YAFFS_TRACE_CHECKPOINT 0x00008000
+
+#define YAFFS_TRACE_VERIFY 0x00010000
+#define YAFFS_TRACE_VERIFY_NAND 0x00020000
+#define YAFFS_TRACE_VERIFY_FULL 0x00040000
+#define YAFFS_TRACE_VERIFY_ALL 0x000F0000
+
+
+#define YAFFS_TRACE_ERROR 0x40000000
+#define YAFFS_TRACE_BUG 0x80000000
+#define YAFFS_TRACE_ALWAYS 0xF0000000
+
+
+#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
+
+#ifndef CONFIG_YAFFS_WINCE
+#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91_pio.h
rename to include/asm-arm/arch-at91/at91_pio.h
diff --git a/include/asm-arm/arch-at91sam9/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91_pit.h
rename to include/asm-arm/arch-at91/at91_pit.h
diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91_pmc.h
rename to include/asm-arm/arch-at91/at91_pmc.h
diff --git a/include/asm-arm/arch-at91sam9/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91_rstc.h
rename to include/asm-arm/arch-at91/at91_rstc.h
diff --git a/include/asm-arm/arch-at91sam9/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91_spi.h
rename to include/asm-arm/arch-at91/at91_spi.h
diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91cap9.h
rename to include/asm-arm/arch-at91/at91cap9.h
diff --git a/include/asm-arm/arch-at91sam9/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91cap9_matrix.h
rename to include/asm-arm/arch-at91/at91cap9_matrix.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9260.h
rename to include/asm-arm/arch-at91/at91sam9260.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9260_matrix.h
rename to include/asm-arm/arch-at91/at91sam9260_matrix.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9261.h
rename to include/asm-arm/arch-at91/at91sam9261.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9261_matrix.h
rename to include/asm-arm/arch-at91/at91sam9261_matrix.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9263.h
rename to include/asm-arm/arch-at91/at91sam9263.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
rename to include/asm-arm/arch-at91/at91sam9263_matrix.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9_smc.h
rename to include/asm-arm/arch-at91/at91sam9_smc.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9rl.h
rename to include/asm-arm/arch-at91/at91sam9rl.h
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h
rename to include/asm-arm/arch-at91/at91sam9rl_matrix.h
diff --git a/include/asm-arm/arch-at91sam9/clk.h b/include/asm-arm/arch-at91/clk.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/clk.h
rename to include/asm-arm/arch-at91/clk.h
diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91/gpio.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/gpio.h
rename to include/asm-arm/arch-at91/gpio.h
diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91/hardware.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/hardware.h
rename to include/asm-arm/arch-at91/hardware.h
diff --git a/include/asm-arm/arch-at91sam9/io.h b/include/asm-arm/arch-at91/io.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/io.h
rename to include/asm-arm/arch-at91/io.h
diff --git a/include/asm-arm/arch-at91sam9/memory-map.h b/include/asm-arm/arch-at91/memory-map.h
similarity index 100%
rename from include/asm-arm/arch-at91sam9/memory-map.h
rename to include/asm-arm/arch-at91/memory-map.h
diff --git a/include/common.h b/include/common.h
index 2fcb1fd..06ed278 100644
--- a/include/common.h
+++ b/include/common.h
@@ -119,11 +119,13 @@
#define debugX(level,fmt,args...)
#endif /* DEBUG */
+#ifndef BUG
#define BUG() do { \
printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
panic("BUG!"); \
} while (0)
#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
+#endif /* BUG */
typedef void (interrupt_handler_t)(void *);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index d547681..37f8cff 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -63,6 +63,10 @@
#define CFG_IMMR 0xE0000000
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DEFAULT_IMMR CFG_IMMR
+#endif
+
#define CFG_MEMTEST_START 0x00001000
#define CFG_MEMTEST_END 0x07f00000
@@ -173,10 +177,10 @@
#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
-#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \
+#define CFG_NOR_BR_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \
(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
BR_V) /* valid */
-#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \
+#define CFG_NOR_OR_PRELIM ( 0xFF800000 /* 8 MByte */ \
| OR_GPCM_XACS \
| OR_GPCM_SCY_9 \
| OR_GPCM_EHTR \
@@ -193,7 +197,7 @@
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
#define CFG_RAMBOOT
#endif
@@ -220,17 +224,31 @@
#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */
/* drivers/mtd/nand/nand.c */
-#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */
+#ifdef CONFIG_NAND_SPL
+#define CFG_NAND_BASE 0xFFF00000
+#else
+#define CFG_NAND_BASE 0xE2800000
+#endif
+
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND 1
+#define CONFIG_NAND_FSL_ELBC 1
+#define CFG_NAND_BLOCK_SIZE 16384
-#define CFG_BR1_PRELIM ( CFG_NAND_BASE \
+#define CFG_NAND_U_BOOT_SIZE (512 << 10)
+#define CFG_NAND_U_BOOT_DST 0x00100000
+#define CFG_NAND_U_BOOT_START 0x00100100
+#define CFG_NAND_U_BOOT_OFFS 16384
+#define CFG_NAND_U_BOOT_RELOC 0x00010000
+
+#define CFG_NAND_BR_PRELIM ( CFG_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V ) /* valid */
-#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+#define CFG_NAND_OR_PRELIM ( 0xFFFF8000 /* length 32K */ \
| OR_FCM_CSCT \
| OR_FCM_CST \
| OR_FCM_CHT \
@@ -238,9 +256,25 @@
| OR_FCM_TRLX \
| OR_FCM_EHTR )
/* 0xFFFF8396 */
+
+#ifdef CONFIG_NAND_U_BOOT
+#define CFG_BR0_PRELIM CFG_NAND_BR_PRELIM
+#define CFG_OR0_PRELIM CFG_NAND_OR_PRELIM
+#define CFG_BR1_PRELIM CFG_NOR_BR_PRELIM
+#define CFG_OR1_PRELIM CFG_NOR_OR_PRELIM
+#else
+#define CFG_BR0_PRELIM CFG_NOR_BR_PRELIM
+#define CFG_OR0_PRELIM CFG_NOR_OR_PRELIM
+#define CFG_BR1_PRELIM CFG_NAND_BR_PRELIM
+#define CFG_OR1_PRELIM CFG_NAND_OR_PRELIM
+#endif
+
#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+#define CFG_NAND_LBLAWBAR_PRELIM CFG_LBLAWBAR1_PRELIM
+#define CFG_NAND_LBLAWAR_PRELIM CFG_LBLAWAR1_PRELIM
+
/* local bus read write buffer mapping */
#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
@@ -272,7 +306,6 @@
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK get_bus_freq(0)
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
@@ -351,7 +384,15 @@
/*
* Environment
*/
-#ifndef CFG_RAMBOOT
+#if defined(CONFIG_NAND_U_BOOT)
+ #define CFG_ENV_IS_IN_NAND 1
+ #define CFG_ENV_OFFSET (512 * 1024)
+ #define CFG_ENV_SECT_SIZE CFG_NAND_BLOCK_SIZE
+ #define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+ #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+ #define CFG_ENV_RANGE (CFG_ENV_SECT_SIZE * 4)
+ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_RANGE)
+#elif !defined(CFG_RAMBOOT)
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
@@ -388,7 +429,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CFG_RAMBOOT)
+#if defined(CFG_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
#undef CONFIG_CMD_ENV
#undef CONFIG_CMD_LOADS
#endif
@@ -430,6 +471,8 @@
HRCWL_CSB_TO_CLKIN_2X1 |\
HRCWL_CORE_TO_CSB_2X1)
+#define CFG_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
+
#elif defined(CFG_33MHZ)
/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
@@ -442,22 +485,31 @@
HRCWL_CSB_TO_CLKIN_5X1 |\
HRCWL_CORE_TO_CSB_2X1)
+#define CFG_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
+
#endif
-/* 0xa0606c00 */
-#define CFG_HRCW_HIGH (\
+#define CFG_HRCW_HIGH_BASE (\
HRCWH_PCI_HOST |\
HRCWH_PCI1_ARBITER_ENABLE |\
HRCWH_CORE_ENABLE |\
- HRCWH_FROM_0X00000100 |\
HRCWH_BOOTSEQ_DISABLE |\
HRCWH_SW_WATCHDOG_DISABLE |\
- HRCWH_ROM_LOC_LOCAL_16BIT |\
- HRCWH_RL_EXT_LEGACY |\
HRCWH_TSEC1M_IN_RGMII |\
HRCWH_TSEC2M_IN_RGMII |\
- HRCWH_BIG_ENDIAN |\
- HRCWH_LALE_NORMAL)
+ HRCWH_BIG_ENDIAN)
+
+#ifdef CONFIG_NAND_SPL
+#define CFG_HRCW_HIGH (CFG_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_ROM_LOC_NAND_SP_8BIT |\
+ HRCWH_RL_EXT_NAND)
+#else
+#define CFG_HRCW_HIGH (CFG_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY)
+#endif
/* System IO Config */
#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
diff --git a/include/linux/err.h b/include/linux/err.h
new file mode 100644
index 0000000..4e08c4f
--- /dev/null
+++ b/include/linux/err.h
@@ -0,0 +1,45 @@
+#ifndef _LINUX_ERR_H
+#define _LINUX_ERR_H
+
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/compiler.h>
+#else
+#include <linux/mtd/compat.h>
+#endif
+
+#include <asm/errno.h>
+
+
+/*
+ * Kernel pointers have redundant information, so we can use a
+ * scheme where we can return either an error code or a dentry
+ * pointer with the same return value.
+ *
+ * This should be a per-architecture thing, to allow different
+ * error and pointer decisions.
+ */
+#define MAX_ERRNO 4095
+
+#ifndef __ASSEMBLY__
+
+#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
+
+static inline void *ERR_PTR(long error)
+{
+ return (void *) error;
+}
+
+static inline long PTR_ERR(const void *ptr)
+{
+ return (long) ptr;
+}
+
+static inline long IS_ERR(const void *ptr)
+{
+ return IS_ERR_VALUE((unsigned long)ptr);
+}
+
+#endif
+
+#endif /* _LINUX_ERR_H */
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
new file mode 100644
index 0000000..d1ded51
--- /dev/null
+++ b/include/linux/mtd/blktrans.h
@@ -0,0 +1,81 @@
+/*
+ * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
+ *
+ * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Interface to Linux block layer for MTD 'translation layers'.
+ *
+ */
+
+#ifndef __MTD_TRANS_H__
+#define __MTD_TRANS_H__
+
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/mutex.h>
+#else
+#include <linux/list.h>
+#endif
+
+struct hd_geometry;
+struct mtd_info;
+struct mtd_blktrans_ops;
+struct file;
+struct inode;
+
+struct mtd_blktrans_dev {
+ struct mtd_blktrans_ops *tr;
+ struct list_head list;
+ struct mtd_info *mtd;
+/* XXX U-BOOT XXX */
+#if 0
+ struct mutex lock;
+#endif
+ int devnum;
+ unsigned long size;
+ int readonly;
+ void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */
+};
+
+struct blkcore_priv; /* Differs for 2.4 and 2.5 kernels; private */
+
+struct mtd_blktrans_ops {
+ char *name;
+ int major;
+ int part_bits;
+ int blksize;
+ int blkshift;
+
+ /* Access functions */
+ int (*readsect)(struct mtd_blktrans_dev *dev,
+ unsigned long block, char *buffer);
+ int (*writesect)(struct mtd_blktrans_dev *dev,
+ unsigned long block, char *buffer);
+
+ /* Block layer ioctls */
+ int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
+ int (*flush)(struct mtd_blktrans_dev *dev);
+
+ /* Called with mtd_table_mutex held; no race with add/remove */
+ int (*open)(struct mtd_blktrans_dev *dev);
+ int (*release)(struct mtd_blktrans_dev *dev);
+
+ /* Called on {de,}registration and on subsequent addition/removal
+ of devices, with mtd_table_mutex held. */
+ void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd);
+ void (*remove_dev)(struct mtd_blktrans_dev *dev);
+
+ struct list_head devs;
+ struct list_head list;
+ struct module *owner;
+
+ struct mtd_blkcore_priv *blkcore_priv;
+};
+
+extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+
+
+#endif /* __MTD_TRANS_H__ */
diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h
index fe55087..9036b74 100644
--- a/include/linux/mtd/compat.h
+++ b/include/linux/mtd/compat.h
@@ -18,7 +18,12 @@
#define KERN_DEBUG
#define kmalloc(size, flags) malloc(size)
-#define kfree(ptr) free(ptr)
+#define kzalloc(size, flags) calloc(size, 1)
+#define vmalloc(size) malloc(size)
+#define kfree(ptr) free(ptr)
+#define vfree(ptr) free(ptr)
+
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
/*
* ..and if you can't take the strict
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 29f6767..12de284 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -1,15 +1,23 @@
-
-/* Linux driver for Disk-On-Chip 2000 */
-/* (c) 1999 Machine Vision Holdings, Inc. */
-/* Author: David Woodhouse <dwmw2@mvhi.com> */
-/* $Id: doc2000.h,v 1.15 2001/09/19 00:22:15 dwmw2 Exp $ */
+/*
+ * Linux driver for Disk-On-Chip devices
+ *
+ * Copyright (C) 1999 Machine Vision Holdings, Inc.
+ * Copyright (C) 2001-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright (C) 2002-2003 SnapGear Inc
+ *
+ * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
+ *
+ * Released under GPL
+ */
#ifndef __MTD_DOC2000_H__
#define __MTD_DOC2000_H__
-struct DiskOnChip;
-
-#include <linux/mtd/nftl.h>
+#include <linux/mtd/mtd.h>
+#if 0
+#include <linux/mutex.h>
+#endif
#define DoC_Sig1 0
#define DoC_Sig2 1
@@ -40,10 +48,58 @@
#define DoC_Mil_CDSN_IO 0x0800
#define DoC_2k_CDSN_IO 0x1800
-#define ReadDOC_(adr, reg) ((volatile unsigned char)(*(volatile __u8 *)(((unsigned long)adr)+((reg)))))
-#define WriteDOC_(d, adr, reg) do{ *(volatile __u8 *)(((unsigned long)adr)+((reg))) = (__u8)d; eieio();} while(0)
+#define DoC_Mplus_NOP 0x1002
+#define DoC_Mplus_AliasResolution 0x1004
+#define DoC_Mplus_DOCControl 0x1006
+#define DoC_Mplus_AccessStatus 0x1008
+#define DoC_Mplus_DeviceSelect 0x1008
+#define DoC_Mplus_Configuration 0x100a
+#define DoC_Mplus_OutputControl 0x100c
+#define DoC_Mplus_FlashControl 0x1020
+#define DoC_Mplus_FlashSelect 0x1022
+#define DoC_Mplus_FlashCmd 0x1024
+#define DoC_Mplus_FlashAddress 0x1026
+#define DoC_Mplus_FlashData0 0x1028
+#define DoC_Mplus_FlashData1 0x1029
+#define DoC_Mplus_ReadPipeInit 0x102a
+#define DoC_Mplus_LastDataRead 0x102c
+#define DoC_Mplus_LastDataRead1 0x102d
+#define DoC_Mplus_WritePipeTerm 0x102e
+#define DoC_Mplus_ECCSyndrome0 0x1040
+#define DoC_Mplus_ECCSyndrome1 0x1041
+#define DoC_Mplus_ECCSyndrome2 0x1042
+#define DoC_Mplus_ECCSyndrome3 0x1043
+#define DoC_Mplus_ECCSyndrome4 0x1044
+#define DoC_Mplus_ECCSyndrome5 0x1045
+#define DoC_Mplus_ECCConf 0x1046
+#define DoC_Mplus_Toggle 0x1046
+#define DoC_Mplus_DownloadStatus 0x1074
+#define DoC_Mplus_CtrlConfirm 0x1076
+#define DoC_Mplus_Power 0x1fff
-#define DOC_IOREMAP_LEN 0x4000
+/* How to access the device?
+ * On ARM, it'll be mmap'd directly with 32-bit wide accesses.
+ * On PPC, it's mmap'd and 16-bit wide.
+ * Others use readb/writeb
+ */
+#if defined(__arm__)
+#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
+#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x8000
+#elif defined(__ppc__)
+#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
+#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x4000
+#else
+#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg))
+#define WriteDOC_(d, adr, reg) writeb(d, (void __iomem *)(adr) + (reg))
+#define DOC_IOREMAP_LEN 0x2000
+
+#endif
+
+#if defined(__i386__) || defined(__x86_64__)
+#define USE_MEMCPY
+#endif
/* These are provided to directly use the DoC_xxx defines */
#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg)
@@ -54,14 +110,21 @@
#define DOC_MODE_RESERVED1 2
#define DOC_MODE_RESERVED2 3
-#define DOC_MODE_MDWREN 4
#define DOC_MODE_CLR_ERR 0x80
+#define DOC_MODE_RST_LAT 0x10
+#define DOC_MODE_BDECT 0x08
+#define DOC_MODE_MDWREN 0x04
-#define DOC_ChipID_UNKNOWN 0x00
#define DOC_ChipID_Doc2k 0x20
+#define DOC_ChipID_Doc2kTSOP 0x21 /* internal number for MTD */
#define DOC_ChipID_DocMil 0x30
+#define DOC_ChipID_DocMilPlus32 0x40
+#define DOC_ChipID_DocMilPlus16 0x41
#define CDSN_CTRL_FR_B 0x80
+#define CDSN_CTRL_FR_B0 0x40
+#define CDSN_CTRL_FR_B1 0x80
+
#define CDSN_CTRL_ECC_IO 0x20
#define CDSN_CTRL_FLASH_IO 0x10
#define CDSN_CTRL_WP 0x08
@@ -77,20 +140,14 @@
#define DOC_ECC_RESV 0x02
#define DOC_ECC_IGNORE 0x01
+#define DOC_FLASH_CE 0x80
+#define DOC_FLASH_WP 0x40
+#define DOC_FLASH_BANK 0x02
+
/* We have to also set the reserved bit 1 for enable */
#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
#define DOC_ECC_DIS (DOC_ECC_RESV)
-#define MAX_FLOORS 4
-#define MAX_CHIPS 4
-
-#define MAX_FLOORS_MIL 4
-#define MAX_CHIPS_MIL 1
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
struct Nand {
char floor, chip;
unsigned long curadr;
@@ -98,20 +155,32 @@
/* Also some erase/write/pipeline info when we get that far */
};
+#define MAX_FLOORS 4
+#define MAX_CHIPS 4
+
+#define MAX_FLOORS_MIL 1
+#define MAX_CHIPS_MIL 1
+
+#define MAX_FLOORS_MPLUS 2
+#define MAX_CHIPS_MPLUS 1
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
struct DiskOnChip {
unsigned long physadr;
- unsigned long virtadr;
+ void __iomem *virtadr;
unsigned long totlen;
- char* name;
- char ChipID; /* Type of DiskOnChip */
+ unsigned char ChipID; /* Type of DiskOnChip */
int ioreg;
- char* chips_name;
unsigned long mfr; /* Flash IDs - only one type of flash per device */
unsigned long id;
int chipshift;
char page256;
char pageadrlen;
+ char interleave; /* Internal interleaving - Millennium Plus style */
unsigned long erasesize;
int curfloor;
@@ -119,98 +188,22 @@
int numchips;
struct Nand *chips;
-
- int nftl_found;
- struct NFTLrecord nftl;
+ struct mtd_info *nextdoc;
+/* XXX U-BOOT XXX */
+#if 0
+ struct mutex lock;
+#endif
};
-#define SECTORSIZE 512
-
-/* Return codes from doc_write(), doc_read(), and doc_erase().
- */
-#define DOC_OK 0
-#define DOC_EIO 1
-#define DOC_EINVAL 2
-#define DOC_EECC 3
-#define DOC_ETIMEOUT 4
-
-/*
- * Function Prototypes
- */
int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
-int doc_rw(struct DiskOnChip* this, int cmd, loff_t from, size_t len,
- size_t *retlen, u_char *buf);
-int doc_read_ecc(struct DiskOnChip* this, loff_t from, size_t len,
- size_t *retlen, u_char *buf, u_char *eccbuf);
-int doc_write_ecc(struct DiskOnChip* this, loff_t to, size_t len,
- size_t *retlen, const u_char *buf, u_char *eccbuf);
-int doc_read_oob(struct DiskOnChip* this, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf);
-int doc_write_oob(struct DiskOnChip* this, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf);
-int doc_erase (struct DiskOnChip* this, loff_t ofs, size_t len);
-
-void doc_probe(unsigned long physadr);
-
-void doc_print(struct DiskOnChip*);
-
-/*
- * Standard NAND flash commands
- */
-#define NAND_CMD_READ0 0
-#define NAND_CMD_READ1 1
-#define NAND_CMD_PAGEPROG 0x10
-#define NAND_CMD_READOOB 0x50
-#define NAND_CMD_ERASE1 0x60
-#define NAND_CMD_STATUS 0x70
-#define NAND_CMD_SEQIN 0x80
-#define NAND_CMD_READID 0x90
-#define NAND_CMD_ERASE2 0xd0
-#define NAND_CMD_RESET 0xff
-
+/* XXX U-BOOT XXX */
+#if 1
/*
* NAND Flash Manufacturer ID Codes
*/
-#define NAND_MFR_TOSHIBA 0x98
-#define NAND_MFR_SAMSUNG 0xec
-
-/*
- * NAND Flash Device ID Structure
- *
- * Structure overview:
- *
- * name - Complete name of device
- *
- * manufacture_id - manufacturer ID code of device.
- *
- * model_id - model ID code of device.
- *
- * chipshift - total number of address bits for the device which
- * is used to calculate address offsets and the total
- * number of bytes the device is capable of.
- *
- * page256 - denotes if flash device has 256 byte pages or not.
- *
- * pageadrlen - number of bytes minus one needed to hold the
- * complete address into the flash array. Keep in
- * mind that when a read or write is done to a
- * specific address, the address is input serially
- * 8 bits at a time. This structure member is used
- * by the read/write routines as a loop index for
- * shifting the address out 8 bits at a time.
- *
- * erasesize - size of an erase block in the flash device.
- */
-struct nand_flash_dev {
- char * name;
- int manufacture_id;
- int model_id;
- int chipshift;
- char page256;
- char pageadrlen;
- unsigned long erasesize;
- int bus16;
-};
+#define NAND_MFR_TOSHIBA 0x98
+#define NAND_MFR_SAMSUNG 0xec
+#endif
#endif /* __MTD_DOC2000_H__ */
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
index 49fd8a6..638a4e4 100644
--- a/include/linux/mtd/fsl_upm.h
+++ b/include/linux/mtd/fsl_upm.h
@@ -31,6 +31,9 @@
int wait_pattern;
int (*dev_ready)(void);
int chip_delay;
+
+ /* no need to fill */
+ int last_ctrl;
};
extern int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun);
diff --git a/include/linux/mtd/inftl-user.h b/include/linux/mtd/inftl-user.h
new file mode 100644
index 0000000..9b1e252
--- /dev/null
+++ b/include/linux/mtd/inftl-user.h
@@ -0,0 +1,91 @@
+/*
+ * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
+ *
+ * Parts of INFTL headers shared with userspace
+ *
+ */
+
+#ifndef __MTD_INFTL_USER_H__
+#define __MTD_INFTL_USER_H__
+
+#define OSAK_VERSION 0x5120
+#define PERCENTUSED 98
+
+#define SECTORSIZE 512
+
+/* Block Control Information */
+
+struct inftl_bci {
+ uint8_t ECCsig[6];
+ uint8_t Status;
+ uint8_t Status1;
+} __attribute__((packed));
+
+struct inftl_unithead1 {
+ uint16_t virtualUnitNo;
+ uint16_t prevUnitNo;
+ uint8_t ANAC;
+ uint8_t NACs;
+ uint8_t parityPerField;
+ uint8_t discarded;
+} __attribute__((packed));
+
+struct inftl_unithead2 {
+ uint8_t parityPerField;
+ uint8_t ANAC;
+ uint16_t prevUnitNo;
+ uint16_t virtualUnitNo;
+ uint8_t NACs;
+ uint8_t discarded;
+} __attribute__((packed));
+
+struct inftl_unittail {
+ uint8_t Reserved[4];
+ uint16_t EraseMark;
+ uint16_t EraseMark1;
+} __attribute__((packed));
+
+union inftl_uci {
+ struct inftl_unithead1 a;
+ struct inftl_unithead2 b;
+ struct inftl_unittail c;
+};
+
+struct inftl_oob {
+ struct inftl_bci b;
+ union inftl_uci u;
+};
+
+
+/* INFTL Media Header */
+
+struct INFTLPartition {
+ __u32 virtualUnits;
+ __u32 firstUnit;
+ __u32 lastUnit;
+ __u32 flags;
+ __u32 spareUnits;
+ __u32 Reserved0;
+ __u32 Reserved1;
+} __attribute__((packed));
+
+struct INFTLMediaHeader {
+ char bootRecordID[8];
+ __u32 NoOfBootImageBlocks;
+ __u32 NoOfBinaryPartitions;
+ __u32 NoOfBDTLPartitions;
+ __u32 BlockMultiplierBits;
+ __u32 FormatFlags;
+ __u32 OsakVersion;
+ __u32 PercentUsed;
+ struct INFTLPartition Partitions[4];
+} __attribute__((packed));
+
+/* Partition flag types */
+#define INFTL_BINARY 0x20000000
+#define INFTL_BDTL 0x40000000
+#define INFTL_LAST 0x80000000
+
+#endif /* __MTD_INFTL_USER_H__ */
+
+
diff --git a/include/linux/mtd/jffs2-user.h b/include/linux/mtd/jffs2-user.h
new file mode 100644
index 0000000..d508ef0
--- /dev/null
+++ b/include/linux/mtd/jffs2-user.h
@@ -0,0 +1,35 @@
+/*
+ * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
+ *
+ * JFFS2 definitions for use in user space only
+ */
+
+#ifndef __JFFS2_USER_H__
+#define __JFFS2_USER_H__
+
+/* This file is blessed for inclusion by userspace */
+#include <linux/jffs2.h>
+#include <endian.h>
+#include <byteswap.h>
+
+#undef cpu_to_je16
+#undef cpu_to_je32
+#undef cpu_to_jemode
+#undef je16_to_cpu
+#undef je32_to_cpu
+#undef jemode_to_cpu
+
+extern int target_endian;
+
+#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
+#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
+
+#define cpu_to_je16(x) ((jint16_t){t16(x)})
+#define cpu_to_je32(x) ((jint32_t){t32(x)})
+#define cpu_to_jemode(x) ((jmode_t){t32(x)})
+
+#define je16_to_cpu(x) (t16((x).v16))
+#define je32_to_cpu(x) (t32((x).v32))
+#define jemode_to_cpu(x) (t32((x).m))
+
+#endif /* __JFFS2_USER_H__ */
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 4cebea9..0ce2099 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -1,5 +1,5 @@
/*
- * $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $
+ * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
*
* Portions of MTD ABI definition which are shared by kernel and user space
*/
@@ -7,6 +7,10 @@
#ifndef __MTD_ABI_H__
#define __MTD_ABI_H__
+#if 1
+#include <linux/mtd/compat.h>
+#endif
+
struct erase_info_user {
uint32_t start;
uint32_t length;
@@ -15,7 +19,7 @@
struct mtd_oob_buf {
uint32_t start;
uint32_t length;
- unsigned char *ptr;
+ unsigned char __user *ptr;
};
#define MTD_ABSENT 0
@@ -23,47 +27,41 @@
#define MTD_ROM 2
#define MTD_NORFLASH 3
#define MTD_NANDFLASH 4
-#define MTD_PEROM 5
-#define MTD_OTHER 14
-#define MTD_UNKNOWN 15
+#define MTD_DATAFLASH 6
+#define MTD_UBIVOLUME 7
-#define MTD_CLEAR_BITS 1 /* Bits can be cleared (flash) */
-#define MTD_SET_BITS 2 /* Bits can be set */
-#define MTD_ERASEABLE 4 /* Has an erase function */
-#define MTD_WRITEB_WRITEABLE 8 /* Direct IO is possible */
-#define MTD_VOLATILE 16 /* Set for RAMs */
-#define MTD_XIP 32 /* eXecute-In-Place possible */
-#define MTD_OOB 64 /* Out-of-band data (NAND flash) */
-#define MTD_ECC 128 /* Device capable of automatic ECC */
-#define MTD_NO_VIRTBLOCKS 256 /* Virtual blocks not allowed */
+#define MTD_WRITEABLE 0x400 /* Device is writeable */
+#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
+#define MTD_NO_ERASE 0x1000 /* No erase necessary */
+#define MTD_STUPID_LOCK 0x2000 /* Always locked after reset */
-/* Some common devices / combinations of capabilities */
+// Some common devices / combinations of capabilities
#define MTD_CAP_ROM 0
-#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
-#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE)
-#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
-#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS)
-
-
-/* Types of automatic ECC/Checksum available */
-#define MTD_ECC_NONE 0 /* No automatic ECC available */
-#define MTD_ECC_RS_DiskOnChip 1 /* Automatic ECC on DiskOnChip */
-#define MTD_ECC_SW 2 /* SW ECC for Toshiba & Samsung devices */
+#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
+#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
+#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
/* ECC byte placement */
-#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */
-#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */
-#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */
-#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */
-#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */
+#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
+#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
+
+/* OTP mode selection */
+#define MTD_OTP_OFF 0
+#define MTD_OTP_FACTORY 1
+#define MTD_OTP_USER 2
struct mtd_info_user {
uint8_t type;
uint32_t flags;
- uint32_t size; /* Total size of the MTD */
+ uint32_t size; // Total size of the MTD
uint32_t erasesize;
- uint32_t oobblock; /* Size of OOB blocks (e.g. 512) */
- uint32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
+ uint32_t writesize;
+ uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
+ /* The below two fields are obsolete and broken, do not use them
+ * (TODO: remove at some point) */
uint32_t ecctype;
uint32_t eccsize;
};
@@ -76,19 +74,36 @@
uint32_t regionindex;
};
-#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
-#define MEMERASE _IOW('M', 2, struct erase_info_user)
-#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
-#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
-#define MEMLOCK _IOW('M', 5, struct erase_info_user)
-#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+struct otp_info {
+ uint32_t start;
+ uint32_t length;
+ uint32_t locked;
+};
+
+#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+#define MEMERASE _IOW('M', 2, struct erase_info_user)
+#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
#define MEMGETREGIONCOUNT _IOR('M', 7, int)
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
#define MEMGETBADBLOCK _IOW('M', 11, loff_t)
#define MEMSETBADBLOCK _IOW('M', 12, loff_t)
+#define OTPSELECT _IOR('M', 13, int)
+#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+#define OTPLOCK _IOR('M', 16, struct otp_info)
+#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
+#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+#define MTDFILEMODE _IO('M', 19)
+/*
+ * Obsolete legacy interface. Keep it in order not to break userspace
+ * interfaces
+ */
struct nand_oobinfo {
uint32_t useecc;
uint32_t eccbytes;
@@ -96,4 +111,46 @@
uint32_t eccpos[48];
};
+struct nand_oobfree {
+ uint32_t offset;
+ uint32_t length;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES 8
+/*
+ * ECC layout control structure. Exported to userspace for
+ * diagnosis and to allow creation of raw images
+ */
+struct nand_ecclayout {
+ uint32_t eccbytes;
+ uint32_t eccpos[64];
+ uint32_t oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
+};
+
+/**
+ * struct mtd_ecc_stats - error correction stats
+ *
+ * @corrected: number of corrected bits
+ * @failed: number of uncorrectable errors
+ * @badblocks: number of bad blocks in this partition
+ * @bbtblocks: number of blocks reserved for bad block tables
+ */
+struct mtd_ecc_stats {
+ uint32_t corrected;
+ uint32_t failed;
+ uint32_t badblocks;
+ uint32_t bbtblocks;
+};
+
+/*
+ * Read/write file modes for access to MTD
+ */
+enum mtd_file_modes {
+ MTD_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_MODE_RAW,
+};
+
#endif /* __MTD_ABI_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 05ba375..8e0dc00 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,5 +1,5 @@
/*
- * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
+ * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
*
* Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
*
@@ -8,10 +8,13 @@
#ifndef __MTD_MTD_H__
#define __MTD_MTD_H__
+
#include <linux/types.h>
#include <linux/mtd/mtd-abi.h>
-#define MAX_MTD_DEVICES 16
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 32
#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
@@ -41,32 +44,83 @@
u_int32_t offset; /* At which this region starts, from the beginning of the MTD */
u_int32_t erasesize; /* For this region */
u_int32_t numblocks; /* Number of blocks of erasesize in this region */
+ unsigned long *lockmap; /* If keeping bitmap of locks */
+};
+
+/*
+ * oob operation modes
+ *
+ * MTD_OOB_PLACE: oob data are placed at the given offset
+ * MTD_OOB_AUTO: oob data are automatically placed at the free areas
+ * which are defined by the ecclayout
+ * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data
+ * is inserted into the data. Thats a raw image of the
+ * flash contents.
+ */
+typedef enum {
+ MTD_OOB_PLACE,
+ MTD_OOB_AUTO,
+ MTD_OOB_RAW,
+} mtd_oob_mode_t;
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode: operation mode
+ *
+ * @len: number of data bytes to write/read
+ *
+ * @retlen: number of data bytes written/read
+ *
+ * @ooblen: number of oob bytes to write/read
+ * @oobretlen: number of oob bytes written/read
+ * @ooboffs: offset of oob data in the oob area (only relevant when
+ * mode = MTD_OOB_PLACE)
+ * @datbuf: data buffer - if NULL only oob data are read/written
+ * @oobbuf: oob data buffer
+ *
+ * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
+ */
+struct mtd_oob_ops {
+ mtd_oob_mode_t mode;
+ size_t len;
+ size_t retlen;
+ size_t ooblen;
+ size_t oobretlen;
+ uint32_t ooboffs;
+ uint8_t *datbuf;
+ uint8_t *oobbuf;
};
struct mtd_info {
u_char type;
u_int32_t flags;
- u_int32_t size; /* Total size of the MTD */
+ u_int32_t size; // Total size of the MTD
- /* "Major" erase size for the device. Naïve users may take this
+ /* "Major" erase size for the device. Naïve users may take this
* to be the only erase size available, or may use the more detailed
* information below if they desire
*/
u_int32_t erasesize;
+ /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
+ * though individual bits can be cleared), in case of NAND flash it is
+ * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
+ * it is of ECC block size, etc. It is illegal to have writesize = 0.
+ * Any driver registering a struct mtd_info must ensure a writesize of
+ * 1 or larger.
+ */
+ u_int32_t writesize;
- u_int32_t oobblock; /* Size of OOB blocks (e.g. 512) */
- u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
- u_int32_t oobavail; /* Number of bytes in OOB area available for fs */
- u_int32_t ecctype;
- u_int32_t eccsize;
+ u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
+ u_int32_t oobavail; // Available OOB bytes per block
-
- /* Kernel-only stuff starts here. */
+ // Kernel-only stuff starts here.
char *name;
int index;
- /* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */
- struct nand_oobinfo oobinfo;
+ /* ecc layout structure pointer - read only ! */
+ struct nand_ecclayout *ecclayout;
/* Data for variable erase regions. If numeraseregions is zero,
* it means that the whole device has erasesize as given above.
@@ -74,9 +128,6 @@
int numeraseregions;
struct mtd_erase_region_info *eraseregions;
- /* This really shouldn't be here. It can go away in 2.5 */
- u_int32_t bank_size;
-
int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
/* This stuff for eXecute-In-Place */
@@ -89,39 +140,35 @@
int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
- int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-
- int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+ int (*read_oob) (struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
+ int (*write_oob) (struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
/*
* Methods to access the protection register area, present in some
* flash devices. The user data is one time programmable but the
* factory data is read only.
*/
- int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
+ int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
- /* This function is not yet implemented */
+ int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
+ int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+ int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
+
+/* XXX U-BOOT XXX */
#if 0
- /* kvec-based read/write methods. We need these especially for NAND flash,
- with its limited number of write cycles per erase.
+ /* kvec-based read/write methods.
NB: The 'count' parameter is the number of _vectors_, each of
which contains an (ofs, len) tuple.
*/
- int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
- int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
- size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
- int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
- size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
#endif
+
/* Sync */
void (*sync) (struct mtd_info *mtd);
-#if 0
+
/* Chip-supported device locking */
int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
@@ -129,15 +176,32 @@
/* Power Management functions */
int (*suspend) (struct mtd_info *mtd);
void (*resume) (struct mtd_info *mtd);
-#endif
+
/* Bad block management functions */
int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
+/* XXX U-BOOT XXX */
+#if 0
+ struct notifier_block reboot_notifier; /* default mode before reboot */
+#endif
+
+ /* ECC status information */
+ struct mtd_ecc_stats ecc_stats;
+ /* Subpage shift (NAND) */
+ int subpage_sft;
+
void *priv;
struct module *owner;
int usecount;
+
+ /* If the driver is something smart, like UBI, it may need to maintain
+ * its own reference counting. The below functions are only for driver.
+ * The driver may register its callbacks. These callbacks are not
+ * supposed to be called by MTD users */
+ int (*get_device) (struct mtd_info *mtd);
+ void (*put_device) (struct mtd_info *mtd);
};
@@ -147,9 +211,11 @@
extern int del_mtd_device (struct mtd_info *mtd);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
extern void put_mtd_device(struct mtd_info *mtd);
+/* XXX U-BOOT XXX */
#if 0
struct mtd_notifier {
void (*add)(struct mtd_info *mtd);
@@ -157,7 +223,6 @@
struct list_head list;
};
-
extern void register_mtd_user (struct mtd_notifier *new);
extern int unregister_mtd_user (struct mtd_notifier *old);
@@ -168,20 +233,6 @@
unsigned long count, loff_t from, size_t *retlen);
#endif
-#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
-#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
-#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
-#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
-#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
-#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
-#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
-#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
-#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
-#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
-#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
-
-
#ifdef CONFIG_MTD_PARTITIONS
void mtd_erase_callback(struct erase_info *instr);
#else
@@ -208,7 +259,6 @@
} while(0)
#else /* CONFIG_MTD_DEBUG */
#define MTDDEBUG(n, args...) do { } while(0)
-
#endif /* CONFIG_MTD_DEBUG */
#endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e2a25a6..2993a89 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -2,114 +2,123 @@
* linux/include/linux/mtd/nand.h
*
* Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
- * Steven J. Hill <sjhill@realitydiluted.com>
+ * Steven J. Hill <sjhill@realitydiluted.com>
* Thomas Gleixner <tglx@linutronix.de>
*
- * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $
+ * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Info:
- * Contains standard defines and IDs for NAND flash devices
+ * Info:
+ * Contains standard defines and IDs for NAND flash devices
*
- * Changelog:
- * 01-31-2000 DMW Created
- * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers
- * so it can be used by other NAND flash device
- * drivers. I also changed the copyright since none
- * of the original contents of this file are specific
- * to DoC devices. David can whack me with a baseball
- * bat later if I did something naughty.
- * 10-11-2000 SJH Added private NAND flash structure for driver
- * 10-24-2000 SJH Added prototype for 'nand_scan' function
- * 10-29-2001 TG changed nand_chip structure to support
- * hardwarespecific function for accessing control lines
- * 02-21-2002 TG added support for different read/write adress and
- * ready/busy line access function
- * 02-26-2002 TG added chip_delay to nand_chip structure to optimize
- * command delay times for different chips
- * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate
- * defines in jffs2/wbuf.c
- * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if
- * CONFIG_MTD_NAND_ECC_JFFS2 is not set
- * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC
- *
- * 08-29-2002 tglx nand_chip structure: data_poi for selecting
- * internal / fs-driver buffer
- * support for 6byte/512byte hardware ECC
- * read_ecc, write_ecc extended for different oob-layout
- * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
- * NAND_YAFFS_OOB
- * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL
- * Split manufacturer and device ID structures
- *
- * 02-08-2004 tglx added option field to nand structure for chip anomalities
- * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id
- * update of nand_chip structure description
+ * Changelog:
+ * See git changelog.
*/
#ifndef __LINUX_MTD_NAND_H
#define __LINUX_MTD_NAND_H
-#include <linux/mtd/compat.h>
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/wait.h>
+#include <linux/spinlock.h>
#include <linux/mtd/mtd.h>
+#endif
+
+#include "config.h"
+
+#include "linux/mtd/compat.h"
+#include "linux/mtd/mtd.h"
+
struct mtd_info;
/* Scan and identify a NAND device */
extern int nand_scan (struct mtd_info *mtd, int max_chips);
+/* Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type */
+extern int nand_scan_ident(struct mtd_info *mtd, int max_chips);
+extern int nand_scan_tail(struct mtd_info *mtd);
+
/* Free resources held by the NAND device */
extern void nand_release (struct mtd_info *mtd);
-/* Read raw data from the device without ECC */
-extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
+/* Internal helper for board drivers which need to override command function */
+extern void nand_wait_ready(struct mtd_info *mtd);
+/* The maximum number of NAND chips in an array */
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
/* This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 64
+#define NAND_MAX_OOBSIZE 128
+#define NAND_MAX_PAGESIZE 4096
/*
* Constants for hardware specific CLE/ALE/NCE function
-*/
+ *
+ * These are bits which can be or'ed to set/clear multiple
+ * bits in one go.
+ */
/* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 1
-/* Deselect the chip by setting nCE to high */
-#define NAND_CTL_CLRNCE 2
+#define NAND_NCE 0x01
/* Select the command latch by setting CLE to high */
-#define NAND_CTL_SETCLE 3
-/* Deselect the command latch by setting CLE to low */
-#define NAND_CTL_CLRCLE 4
+#define NAND_CLE 0x02
/* Select the address latch by setting ALE to high */
-#define NAND_CTL_SETALE 5
-/* Deselect the address latch by setting ALE to low */
-#define NAND_CTL_CLRALE 6
-/* Set write protection by setting WP to high. Not used! */
-#define NAND_CTL_SETWP 7
-/* Clear write protection by setting WP to low. Not used! */
-#define NAND_CTL_CLRWP 8
+#define NAND_ALE 0x04
+
+#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE)
+#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE)
+#define NAND_CTRL_CHANGE 0x80
/*
* Standard NAND flash commands
*/
#define NAND_CMD_READ0 0
#define NAND_CMD_READ1 1
+#define NAND_CMD_RNDOUT 5
#define NAND_CMD_PAGEPROG 0x10
#define NAND_CMD_READOOB 0x50
#define NAND_CMD_ERASE1 0x60
#define NAND_CMD_STATUS 0x70
#define NAND_CMD_STATUS_MULTI 0x71
#define NAND_CMD_SEQIN 0x80
+#define NAND_CMD_RNDIN 0x85
#define NAND_CMD_READID 0x90
#define NAND_CMD_ERASE2 0xd0
#define NAND_CMD_RESET 0xff
/* Extended commands for large page devices */
#define NAND_CMD_READSTART 0x30
+#define NAND_CMD_RNDOUTSTART 0xE0
#define NAND_CMD_CACHEDPROG 0x15
+/* Extended commands for AG-AND device */
+/*
+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
+ * there is no way to distinguish that from NAND_CMD_READ0
+ * until the remaining sequence of commands has been completed
+ * so add a high order bit and mask it off in the command.
+ */
+#define NAND_CMD_DEPLETE1 0x100
+#define NAND_CMD_DEPLETE2 0x38
+#define NAND_CMD_STATUS_MULTI 0x71
+#define NAND_CMD_STATUS_ERROR 0x72
+/* multi-bank error status (banks 0-3) */
+#define NAND_CMD_STATUS_ERROR0 0x73
+#define NAND_CMD_STATUS_ERROR1 0x74
+#define NAND_CMD_STATUS_ERROR2 0x75
+#define NAND_CMD_STATUS_ERROR3 0x76
+#define NAND_CMD_STATUS_RESET 0x7f
+#define NAND_CMD_STATUS_CLEAR 0xff
+
+#define NAND_CMD_NONE -1
+
/* Status bits */
#define NAND_STATUS_FAIL 0x01
#define NAND_STATUS_FAIL_N1 0x02
@@ -120,25 +129,16 @@
/*
* Constants for ECC_MODES
*/
-
-/* No ECC. Usage is not recommended ! */
-#define NAND_ECC_NONE 0
-/* Software ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_SOFT 1
-/* Hardware ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_HW3_256 2
-/* Hardware ECC 3 byte ECC per 512 Byte data */
-#define NAND_ECC_HW3_512 3
-/* Hardware ECC 6 byte ECC per 512 Byte data */
-#define NAND_ECC_HW6_512 4
-/* Hardware ECC 8 byte ECC per 512 Byte data */
-#define NAND_ECC_HW8_512 6
-/* Hardware ECC 12 byte ECC per 2048 Byte data */
-#define NAND_ECC_HW12_2048 7
+typedef enum {
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+} nand_ecc_modes_t;
/*
* Constants for Hardware ECC
-*/
+ */
/* Reset Hardware ECC for read */
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
@@ -146,6 +146,10 @@
/* Enable Hardware ECC before syndrom is read back from flash */
#define NAND_ECC_READSYN 2
+/* Bit mask for flags passed to do_nand_read_ecc */
+#define NAND_GET_DEVICE 0x80
+
+
/* Option constants for bizarre disfunctionality and real
* features
*/
@@ -165,6 +169,17 @@
/* Chip has a array of 4 pages which can be read without
* additional ready /busy waits */
#define NAND_4PAGE_ARRAY 0x00000040
+/* Chip requires that BBT is periodically rewritten to prevent
+ * bits from adjacent blocks from 'leaking' in altering data.
+ * This happens with the Renesas AG-AND chips, possibly others. */
+#define BBT_AUTO_REFRESH 0x00000080
+/* Chip does not require ready check on read. True
+ * for all large page devices, as they do not support
+ * autoincrement.*/
+#define NAND_NO_READRDY 0x00000100
+/* Chip does not allow subpage writes */
+#define NAND_NO_SUBPAGE_WRITE 0x00000200
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS \
@@ -183,18 +198,20 @@
/* Use a flash based bad block table. This option is passed to the
* default bad block table function. */
#define NAND_USE_FLASH_BBT 0x00010000
-/* The hw ecc generator provides a syndrome instead a ecc value on read
- * This can only work if we have the ecc bytes directly behind the
- * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
-#define NAND_HWECC_SYNDROME 0x00020000
-
-
+/* This option skips the bbt scan during initialization. */
+#define NAND_SKIP_BBTSCAN 0x00020000
+/* This option is defined if the board driver allocates its own buffers
+ (e.g. because it needs them DMA-coherent */
+#define NAND_OWN_BUFFERS 0x00040000
/* Options set by nand scan */
-/* Nand scan has allocated oob_buf */
-#define NAND_OOBBUF_ALLOC 0x40000000
-/* Nand scan has allocated data_buf */
-#define NAND_DATABUF_ALLOC 0x80000000
+/* bbt has already been read */
+#define NAND_BBT_SCANNED 0x40000000
+/* Nand scan has allocated controller struct */
+#define NAND_CONTROLLER_ALLOC 0x80000000
+/* Cell info constants */
+#define NAND_CI_CHIPNR_MSK 0x03
+#define NAND_CI_CELLTYPE_MSK 0x0C
/*
* nand_state_t - chip states
@@ -207,135 +224,217 @@
FL_ERASING,
FL_SYNCING,
FL_CACHEDPRG,
+ FL_PM_SUSPENDED,
} nand_state_t;
/* Keep gcc happy */
struct nand_chip;
-#if 0
/**
- * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
- * @lock: protection lock
+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
+ * @lock: protection lock
* @active: the mtd device which holds the controller currently
+ * @wq: wait queue to sleep on if a NAND operation is in progress
+ * used instead of the per chip wait queue when a hw controller is available
*/
struct nand_hw_control {
+/* XXX U-BOOT XXX */
+#if 0
spinlock_t lock;
+ wait_queue_head_t wq;
+#endif
struct nand_chip *active;
};
-#endif
+
+/**
+ * struct nand_ecc_ctrl - Control structure for ecc
+ * @mode: ecc mode
+ * @steps: number of ecc steps per page
+ * @size: data bytes per ecc step
+ * @bytes: ecc bytes per step
+ * @total: total number of ecc bytes per page
+ * @prepad: padding information for syndrome based ecc generators
+ * @postpad: padding information for syndrome based ecc generators
+ * @layout: ECC layout control struct pointer
+ * @hwctl: function to control hardware ecc generator. Must only
+ * be provided if an hardware ECC is available
+ * @calculate: function for ecc calculation or readback from ecc hardware
+ * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @read_page_raw: function to read a raw page without ECC
+ * @write_page_raw: function to write a raw page without ECC
+ * @read_page: function to read a page according to the ecc generator requirements
+ * @write_page: function to write a page according to the ecc generator requirements
+ * @read_oob: function to read chip OOB data
+ * @write_oob: function to write chip OOB data
+ */
+struct nand_ecc_ctrl {
+ nand_ecc_modes_t mode;
+ int steps;
+ int size;
+ int bytes;
+ int total;
+ int prepad;
+ int postpad;
+ struct nand_ecclayout *layout;
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd,
+ const uint8_t *dat,
+ uint8_t *ecc_code);
+ int (*correct)(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc,
+ uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf);
+ void (*write_page_raw)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_page)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf);
+ void (*write_page)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_oob)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page,
+ int sndcmd);
+ int (*write_oob)(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page);
+};
+
+/**
+ * struct nand_buffers - buffer structure for read/write
+ * @ecccalc: buffer for calculated ecc
+ * @ecccode: buffer for ecc read from flash
+ * @databuf: buffer for data - dynamically sized
+ *
+ * Do not change the order of buffers. databuf and oobrbuf must be in
+ * consecutive order.
+ */
+struct nand_buffers {
+ uint8_t ecccalc[NAND_MAX_OOBSIZE];
+ uint8_t ecccode[NAND_MAX_OOBSIZE];
+ uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+};
/**
* struct nand_chip - NAND Private Flash Chip Data
* @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
* @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
* @read_byte: [REPLACEABLE] read one byte from the chip
- * @write_byte: [REPLACEABLE] write one byte to the chip
* @read_word: [REPLACEABLE] read one word from the chip
- * @write_word: [REPLACEABLE] write one word to the chip
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
* @verify_buf: [REPLACEABLE] verify buffer contents against the chip data
* @select_chip: [REPLACEABLE] select chip nr
* @block_bad: [REPLACEABLE] check, if the block is bad
* @block_markbad: [REPLACEABLE] mark the block bad
- * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines
+ * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * ALE/CLE/nCE. Also used to write command and address
* @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
* If set to NULL no access to ready/busy is available and the ready/busy information
* is read from the chip status register
* @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware
- * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
- * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
- * be provided if a hardware ECC is available
+ * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @buffers: buffer structure for read/write
+ * @hwcontrol: platform-specific hardware control structure
+ * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due to AND support
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize: [INTERN] databytes used per ecc-calculation
- * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step
- * @eccsteps: [INTERN] number of ecc calculation steps per page
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
- * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip
* @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress
* @state: [INTERN] the current state of the NAND device
+ * @oob_poi: poison value buffer
* @page_shift: [INTERN] number of address bits in a page (column address bits)
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @chip_shift: [INTERN] number of address bits in one chip
- * @data_buf: [INTERN] internal buffer for one page + oob
- * @oob_buf: [INTERN] oob buffer for one eraseblock
+ * @datbuf: [INTERN] internal buffer for one page + oob
+ * @oobbuf: [INTERN] oob buffer for one eraseblock
* @oobdirty: [INTERN] indicates that oob_buf must be reinitialized
* @data_poi: [INTERN] pointer to a data buffer
* @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
* special functionality. See the defines for further explanation
* @badblockpos: [INTERN] position of the bad block marker in the oob area
+ * @cellinfo: [INTERN] MLC/multichip data from chip ident
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
* @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
- * @autooob: [REPLACEABLE] the default (auto)placement scheme
+ * @subpagesize: [INTERN] holds the subpagesize
+ * @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
* @bbt_md: [REPLACEABLE] bad block table mirror descriptor
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
+ * @controller: [REPLACEABLE] a pointer to a hardware controller structure
+ * which is shared among multiple independend devices
* @priv: [OPTIONAL] pointer to private chip date
+ * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
+ * (determine if errors are correctable)
+ * @write_page: [REPLACEABLE] High-level page write function
*/
struct nand_chip {
void __iomem *IO_ADDR_R;
void __iomem *IO_ADDR_W;
- u_char (*read_byte)(struct mtd_info *mtd);
- void (*write_byte)(struct mtd_info *mtd, u_char byte);
+ uint8_t (*read_byte)(struct mtd_info *mtd);
u16 (*read_word)(struct mtd_info *mtd);
- void (*write_word)(struct mtd_info *mtd, u16 word);
-
- void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
- int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
+ unsigned int ctrl);
int (*dev_ready)(struct mtd_info *mtd);
void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
- int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
- int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
- int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
- void (*enable_hwecc)(struct mtd_info *mtd, int mode);
+ int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
void (*erase_cmd)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int eccmode;
- int eccsize;
- int eccbytes;
- int eccsteps;
+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw);
+
int chip_delay;
-#if 0
- spinlock_t chip_lock;
- wait_queue_head_t wq;
- nand_state_t state;
-#endif
+ unsigned int options;
+
int page_shift;
int phys_erase_shift;
int bbt_erase_shift;
int chip_shift;
- u_char *data_buf;
- u_char *oob_buf;
- int oobdirty;
- u_char *data_poi;
- unsigned int options;
- int badblockpos;
int numchips;
unsigned long chipsize;
int pagemask;
int pagebuf;
- struct nand_oobinfo *autooob;
+ int subpagesize;
+ uint8_t cellinfo;
+ int badblockpos;
+
+ nand_state_t state;
+
+ uint8_t *oob_poi;
+ struct nand_hw_control *controller;
+ struct nand_ecclayout *ecclayout;
+
+ struct nand_ecc_ctrl ecc;
+ struct nand_buffers *buffers;
+
+ struct nand_hw_control hwcontrol;
+
+ struct mtd_oob_ops ops;
+
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
+
struct nand_bbt_descr *badblock_pattern;
- struct nand_hw_control *controller;
+
void *priv;
};
@@ -348,11 +447,11 @@
#define NAND_MFR_NATIONAL 0x8f
#define NAND_MFR_RENESAS 0x07
#define NAND_MFR_STMICRO 0x20
+#define NAND_MFR_HYNIX 0xad
#define NAND_MFR_MICRON 0x2c
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
- *
* @name: Identify the device type
* @id: device ID code
* @pagesize: Pagesize in bytes. Either 256 or 512 or 0
@@ -403,7 +502,7 @@
* blocks is reserved at the end of the device where the tables are
* written.
* @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- * bad) block in the stored bbt
+ * bad) block in the stored bbt
* @pattern: pattern to identify bad block table or factory marked good /
* bad blocks, can be NULL, if len = 0
*
@@ -417,11 +516,11 @@
int pages[NAND_MAX_CHIPS];
int offs;
int veroffs;
- uint8_t version[NAND_MAX_CHIPS];
+ uint8_t version[NAND_MAX_CHIPS];
int len;
int maxblocks;
int reserved_block_code;
- uint8_t *pattern;
+ uint8_t *pattern;
};
/* Options for the bad block table descriptors */
@@ -433,7 +532,7 @@
#define NAND_BBT_4BIT 0x00000004
#define NAND_BBT_8BIT 0x00000008
/* The bad block table is in the last good block of the device */
-#define NAND_BBT_LASTBLOCK 0x00000010
+#define NAND_BBT_LASTBLOCK 0x00000010
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_ABSPAGE 0x00000020
/* The bbt is at the given page, else we must scan for the bbt */
@@ -456,13 +555,16 @@
#define NAND_BBT_SCAN2NDPAGE 0x00004000
/* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS 4
+#define NAND_BBT_SCAN_MAXBLOCKS 4
-extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
-extern int nand_default_bbt (struct mtd_info *mtd);
-extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
-extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
+extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_default_bbt(struct mtd_info *mtd);
+extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
+extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt);
+extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, uint8_t * buf);
/*
* Constants for oob configuration
@@ -470,4 +572,67 @@
#define NAND_SMALL_BADBLOCK_POS 5
#define NAND_LARGE_BADBLOCK_POS 0
+/**
+ * struct platform_nand_chip - chip level device structure
+ * @nr_chips: max. number of chips to scan for
+ * @chip_offset: chip number offset
+ * @nr_partitions: number of partitions pointed to by partitions (or zero)
+ * @partitions: mtd partition list
+ * @chip_delay: R/B delay value in us
+ * @options: Option flags, e.g. 16bit buswidth
+ * @ecclayout: ecc layout info structure
+ * @part_probe_types: NULL-terminated array of probe types
+ * @priv: hardware controller specific settings
+ */
+struct platform_nand_chip {
+ int nr_chips;
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecclayout;
+ int chip_delay;
+ unsigned int options;
+ const char **part_probe_types;
+ void *priv;
+};
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ * @hwcontrol: platform specific hardware control structure
+ * @dev_ready: platform specific function to read ready/busy pin
+ * @select_chip: platform specific chip select function
+ * @cmd_ctrl: platform specific function for controlling
+ * ALE/CLE/nCE. Also used to write command and address
+ * @priv: private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
+ unsigned int ctrl);
+ void *priv;
+};
+
+/**
+ * struct platform_nand_data - container structure for platform-specific data
+ * @chip: chip level chip structure
+ * @ctrl: controller level device structure
+ */
+struct platform_nand_data {
+ struct platform_nand_chip chip;
+ struct platform_nand_ctrl ctrl;
+};
+
+/* Some helpers to access the data structures */
+static inline
+struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return chip->priv;
+}
+
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nftl-user.h b/include/linux/mtd/nftl-user.h
new file mode 100644
index 0000000..b2bca18
--- /dev/null
+++ b/include/linux/mtd/nftl-user.h
@@ -0,0 +1,76 @@
+/*
+ * $Id: nftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
+ *
+ * Parts of NFTL headers shared with userspace
+ *
+ */
+
+#ifndef __MTD_NFTL_USER_H__
+#define __MTD_NFTL_USER_H__
+
+/* Block Control Information */
+
+struct nftl_bci {
+ unsigned char ECCSig[6];
+ uint8_t Status;
+ uint8_t Status1;
+}__attribute__((packed));
+
+/* Unit Control Information */
+
+struct nftl_uci0 {
+ uint16_t VirtUnitNum;
+ uint16_t ReplUnitNum;
+ uint16_t SpareVirtUnitNum;
+ uint16_t SpareReplUnitNum;
+} __attribute__((packed));
+
+struct nftl_uci1 {
+ uint32_t WearInfo;
+ uint16_t EraseMark;
+ uint16_t EraseMark1;
+} __attribute__((packed));
+
+struct nftl_uci2 {
+ uint16_t FoldMark;
+ uint16_t FoldMark1;
+ uint32_t unused;
+} __attribute__((packed));
+
+union nftl_uci {
+ struct nftl_uci0 a;
+ struct nftl_uci1 b;
+ struct nftl_uci2 c;
+};
+
+struct nftl_oob {
+ struct nftl_bci b;
+ union nftl_uci u;
+};
+
+/* NFTL Media Header */
+
+struct NFTLMediaHeader {
+ char DataOrgID[6];
+ uint16_t NumEraseUnits;
+ uint16_t FirstPhysicalEUN;
+ uint32_t FormattedSize;
+ unsigned char UnitSizeFactor;
+} __attribute__((packed));
+
+#define MAX_ERASE_ZONES (8192 - 512)
+
+#define ERASE_MARK 0x3c69
+#define SECTOR_FREE 0xff
+#define SECTOR_USED 0x55
+#define SECTOR_IGNORE 0x11
+#define SECTOR_DELETED 0x00
+
+#define FOLD_MARK_IN_PROGRESS 0x5555
+
+#define ZONE_GOOD 0xff
+#define ZONE_BAD_ORIGINAL 0
+#define ZONE_BAD_MARKED 7
+
+
+#endif /* __MTD_NFTL_USER_H__ */
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index b0337c3..04963a5 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,75 +1,16 @@
-
-/* Defines for NAND Flash Translation Layer */
-/* (c) 1999 Machine Vision Holdings, Inc. */
-/* Author: David Woodhouse <dwmw2@mvhi.com> */
-/* $Id: nftl.h,v 1.10 2000/12/29 00:25:38 dwmw2 Exp $ */
+/*
+ * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
+ *
+ * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ */
#ifndef __MTD_NFTL_H__
#define __MTD_NFTL_H__
-/* Block Control Information */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
-struct nftl_bci {
- unsigned char ECCSig[6];
- __u8 Status;
- __u8 Status1;
-}__attribute__((packed));
-
-/* Unit Control Information */
-
-struct nftl_uci0 {
- __u16 VirtUnitNum;
- __u16 ReplUnitNum;
- __u16 SpareVirtUnitNum;
- __u16 SpareReplUnitNum;
-} __attribute__((packed));
-
-struct nftl_uci1 {
- __u32 WearInfo;
- __u16 EraseMark;
- __u16 EraseMark1;
-} __attribute__((packed));
-
-struct nftl_uci2 {
- __u16 FoldMark;
- __u16 FoldMark1;
- __u32 unused;
-} __attribute__((packed));
-
-union nftl_uci {
- struct nftl_uci0 a;
- struct nftl_uci1 b;
- struct nftl_uci2 c;
-};
-
-struct nftl_oob {
- struct nftl_bci b;
- union nftl_uci u;
-};
-
-/* NFTL Media Header */
-
-struct NFTLMediaHeader {
- char DataOrgID[6];
- __u16 NumEraseUnits;
- __u16 FirstPhysicalEUN;
- __u32 FormattedSize;
- unsigned char UnitSizeFactor;
-} __attribute__((packed));
-
-#define MAX_ERASE_ZONES (8192 - 512)
-
-#define ERASE_MARK 0x3c69
-#define SECTOR_FREE 0xff
-#define SECTOR_USED 0x55
-#define SECTOR_IGNORE 0x11
-#define SECTOR_DELETED 0x00
-
-#define FOLD_MARK_IN_PROGRESS 0x5555
-
-#define ZONE_GOOD 0xff
-#define ZONE_BAD_ORIGINAL 0
-#define ZONE_BAD_MARKED 7
+#include <linux/mtd/nftl-user.h>
/* these info are used in ReplUnitTable */
#define BLOCK_NIL 0xffff /* last block of a chain */
@@ -78,7 +19,7 @@
#define BLOCK_RESERVED 0xfffc /* bios block or bad block */
struct NFTLrecord {
- struct DiskOnChip *mtd;
+ struct mtd_blktrans_dev mbd;
__u16 MediaUnit, SpareMediaUnit;
__u32 EraseSize;
struct NFTLMediaHeader MediaHdr;
@@ -90,16 +31,24 @@
__u16 lastEUN; /* should be suppressed */
__u16 numfreeEUNs;
__u16 LastFreeEUN; /* To speed up finding a free EUN */
- __u32 nr_sects;
int head,sect,cyl;
__u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */
__u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */
- unsigned int nb_blocks; /* number of physical blocks */
- unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+ struct nand_ecclayout oobinfo;
};
+int NFTL_mount(struct NFTLrecord *s);
+int NFTL_formatblock(struct NFTLrecord *s, int block);
+
+#ifndef NFTL_MAJOR
+#define NFTL_MAJOR 93
+#endif
+
#define MAX_NFTLS 16
-#define MAX_SECTORS_PER_UNIT 32
+#define MAX_SECTORS_PER_UNIT 64
#define NFTL_PARTN_BITS 4
#endif /* __MTD_NFTL_H__ */
diff --git a/include/linux/mtd/ubi-header.h b/include/linux/mtd/ubi-header.h
new file mode 100644
index 0000000..fa479c7
--- /dev/null
+++ b/include/linux/mtd/ubi-header.h
@@ -0,0 +1,360 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Authors: Artem Bityutskiy (Битюцкий Артём)
+ * Thomas Gleixner
+ * Frank Haverkamp
+ * Oliver Lohmann
+ * Andreas Arnez
+ */
+
+/*
+ * This file defines the layout of UBI headers and all the other UBI on-flash
+ * data structures. May be included by user-space.
+ */
+
+#ifndef __UBI_HEADER_H__
+#define __UBI_HEADER_H__
+
+#include <asm/byteorder.h>
+
+/* The version of UBI images supported by this implementation */
+#define UBI_VERSION 1
+
+/* The highest erase counter value supported by this implementation */
+#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF
+
+/* The initial CRC32 value used when calculating CRC checksums */
+#define UBI_CRC32_INIT 0xFFFFFFFFU
+
+/* Erase counter header magic number (ASCII "UBI#") */
+#define UBI_EC_HDR_MAGIC 0x55424923
+/* Volume identifier header magic number (ASCII "UBI!") */
+#define UBI_VID_HDR_MAGIC 0x55424921
+
+/*
+ * Volume type constants used in the volume identifier header.
+ *
+ * @UBI_VID_DYNAMIC: dynamic volume
+ * @UBI_VID_STATIC: static volume
+ */
+enum {
+ UBI_VID_DYNAMIC = 1,
+ UBI_VID_STATIC = 2
+};
+
+/*
+ * Compatibility constants used by internal volumes.
+ *
+ * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
+ * to the flash
+ * @UBI_COMPAT_RO: attach this device in read-only mode
+ * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
+ * physical eraseblocks, don't allow the wear-leveling unit to move them
+ * @UBI_COMPAT_REJECT: reject this UBI image
+ */
+enum {
+ UBI_COMPAT_DELETE = 1,
+ UBI_COMPAT_RO = 2,
+ UBI_COMPAT_PRESERVE = 4,
+ UBI_COMPAT_REJECT = 5
+};
+
+/*
+ * ubi16_t/ubi32_t/ubi64_t - 16, 32, and 64-bit integers used in UBI on-flash
+ * data structures.
+ */
+typedef struct {
+ uint16_t int16;
+} __attribute__ ((packed)) ubi16_t;
+
+typedef struct {
+ uint32_t int32;
+} __attribute__ ((packed)) ubi32_t;
+
+typedef struct {
+ uint64_t int64;
+} __attribute__ ((packed)) ubi64_t;
+
+/*
+ * In this implementation of UBI uses the big-endian format for on-flash
+ * integers. The below are the corresponding conversion macros.
+ */
+#define cpu_to_ubi16(x) ((ubi16_t){__cpu_to_be16(x)})
+#define ubi16_to_cpu(x) ((uint16_t)__be16_to_cpu((x).int16))
+
+#define cpu_to_ubi32(x) ((ubi32_t){__cpu_to_be32(x)})
+#define ubi32_to_cpu(x) ((uint32_t)__be32_to_cpu((x).int32))
+
+#define cpu_to_ubi64(x) ((ubi64_t){__cpu_to_be64(x)})
+#define ubi64_to_cpu(x) ((uint64_t)__be64_to_cpu((x).int64))
+
+/* Sizes of UBI headers */
+#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr)
+#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)
+
+/* Sizes of UBI headers without the ending CRC */
+#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(ubi32_t))
+#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(ubi32_t))
+
+/**
+ * struct ubi_ec_hdr - UBI erase counter header.
+ * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
+ * @version: version of UBI implementation which is supposed to accept this
+ * UBI image
+ * @padding1: reserved for future, zeroes
+ * @ec: the erase counter
+ * @vid_hdr_offset: where the VID header starts
+ * @data_offset: where the user data start
+ * @padding2: reserved for future, zeroes
+ * @hdr_crc: erase counter header CRC checksum
+ *
+ * The erase counter header takes 64 bytes and has a plenty of unused space for
+ * future usage. The unused fields are zeroed. The @version field is used to
+ * indicate the version of UBI implementation which is supposed to be able to
+ * work with this UBI image. If @version is greater then the current UBI
+ * version, the image is rejected. This may be useful in future if something
+ * is changed radically. This field is duplicated in the volume identifier
+ * header.
+ *
+ * The @vid_hdr_offset and @data_offset fields contain the offset of the the
+ * volume identifier header and user data, relative to the beginning of the
+ * physical eraseblock. These values have to be the same for all physical
+ * eraseblocks.
+ */
+struct ubi_ec_hdr {
+ ubi32_t magic;
+ uint8_t version;
+ uint8_t padding1[3];
+ ubi64_t ec; /* Warning: the current limit is 31-bit anyway! */
+ ubi32_t vid_hdr_offset;
+ ubi32_t data_offset;
+ uint8_t padding2[36];
+ ubi32_t hdr_crc;
+} __attribute__ ((packed));
+
+/**
+ * struct ubi_vid_hdr - on-flash UBI volume identifier header.
+ * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
+ * @version: UBI implementation version which is supposed to accept this UBI
+ * image (%UBI_VERSION)
+ * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
+ * @copy_flag: if this logical eraseblock was copied from another physical
+ * eraseblock (for wear-leveling reasons)
+ * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
+ * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
+ * @vol_id: ID of this volume
+ * @lnum: logical eraseblock number
+ * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
+ * removed, kept only for not breaking older UBI users)
+ * @data_size: how many bytes of data this logical eraseblock contains
+ * @used_ebs: total number of used logical eraseblocks in this volume
+ * @data_pad: how many bytes at the end of this physical eraseblock are not
+ * used
+ * @data_crc: CRC checksum of the data stored in this logical eraseblock
+ * @padding1: reserved for future, zeroes
+ * @sqnum: sequence number
+ * @padding2: reserved for future, zeroes
+ * @hdr_crc: volume identifier header CRC checksum
+ *
+ * The @sqnum is the value of the global sequence counter at the time when this
+ * VID header was created. The global sequence counter is incremented each time
+ * UBI writes a new VID header to the flash, i.e. when it maps a logical
+ * eraseblock to a new physical eraseblock. The global sequence counter is an
+ * unsigned 64-bit integer and we assume it never overflows. The @sqnum
+ * (sequence number) is used to distinguish between older and newer versions of
+ * logical eraseblocks.
+ *
+ * There are 2 situations when there may be more then one physical eraseblock
+ * corresponding to the same logical eraseblock, i.e., having the same @vol_id
+ * and @lnum values in the volume identifier header. Suppose we have a logical
+ * eraseblock L and it is mapped to the physical eraseblock P.
+ *
+ * 1. Because UBI may erase physical eraseblocks asynchronously, the following
+ * situation is possible: L is asynchronously erased, so P is scheduled for
+ * erasure, then L is written to,i.e. mapped to another physical eraseblock P1,
+ * so P1 is written to, then an unclean reboot happens. Result - there are 2
+ * physical eraseblocks P and P1 corresponding to the same logical eraseblock
+ * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the
+ * flash.
+ *
+ * 2. From time to time UBI moves logical eraseblocks to other physical
+ * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P
+ * to P1, and an unclean reboot happens before P is physically erased, there
+ * are two physical eraseblocks P and P1 corresponding to L and UBI has to
+ * select one of them when the flash is attached. The @sqnum field says which
+ * PEB is the original (obviously P will have lower @sqnum) and the copy. But
+ * it is not enough to select the physical eraseblock with the higher sequence
+ * number, because the unclean reboot could have happen in the middle of the
+ * copying process, so the data in P is corrupted. It is also not enough to
+ * just select the physical eraseblock with lower sequence number, because the
+ * data there may be old (consider a case if more data was added to P1 after
+ * the copying). Moreover, the unclean reboot may happen when the erasure of P
+ * was just started, so it result in unstable P, which is "mostly" OK, but
+ * still has unstable bits.
+ *
+ * UBI uses the @copy_flag field to indicate that this logical eraseblock is a
+ * copy. UBI also calculates data CRC when the data is moved and stores it at
+ * the @data_crc field of the copy (P1). So when UBI needs to pick one physical
+ * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
+ * examined. If it is cleared, the situation* is simple and the newer one is
+ * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
+ * checksum is correct, this physical eraseblock is selected (P1). Otherwise
+ * the older one (P) is selected.
+ *
+ * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
+ * in the past. But it is not used anymore and we keep it in order to be able
+ * to deal with old UBI images. It will be removed at some point.
+ *
+ * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
+ * Internal volumes are not seen from outside and are used for various internal
+ * UBI purposes. In this implementation there is only one internal volume - the
+ * layout volume. Internal volumes are the main mechanism of UBI extensions.
+ * For example, in future one may introduce a journal internal volume. Internal
+ * volumes have their own reserved range of IDs.
+ *
+ * The @compat field is only used for internal volumes and contains the "degree
+ * of their compatibility". It is always zero for user volumes. This field
+ * provides a mechanism to introduce UBI extensions and to be still compatible
+ * with older UBI binaries. For example, if someone introduced a journal in
+ * future, he would probably use %UBI_COMPAT_DELETE compatibility for the
+ * journal volume. And in this case, older UBI binaries, which know nothing
+ * about the journal volume, would just delete this volume and work perfectly
+ * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image
+ * - it just ignores the Ext3fs journal.
+ *
+ * The @data_crc field contains the CRC checksum of the contents of the logical
+ * eraseblock if this is a static volume. In case of dynamic volumes, it does
+ * not contain the CRC checksum as a rule. The only exception is when the
+ * data of the physical eraseblock was moved by the wear-leveling unit, then
+ * the wear-leveling unit calculates the data CRC and stores it in the
+ * @data_crc field. And of course, the @copy_flag is %in this case.
+ *
+ * The @data_size field is used only for static volumes because UBI has to know
+ * how many bytes of data are stored in this eraseblock. For dynamic volumes,
+ * this field usually contains zero. The only exception is when the data of the
+ * physical eraseblock was moved to another physical eraseblock for
+ * wear-leveling reasons. In this case, UBI calculates CRC checksum of the
+ * contents and uses both @data_crc and @data_size fields. In this case, the
+ * @data_size field contains data size.
+ *
+ * The @used_ebs field is used only for static volumes and indicates how many
+ * eraseblocks the data of the volume takes. For dynamic volumes this field is
+ * not used and always contains zero.
+ *
+ * The @data_pad is calculated when volumes are created using the alignment
+ * parameter. So, effectively, the @data_pad field reduces the size of logical
+ * eraseblocks of this volume. This is very handy when one uses block-oriented
+ * software (say, cramfs) on top of the UBI volume.
+ */
+struct ubi_vid_hdr {
+ ubi32_t magic;
+ uint8_t version;
+ uint8_t vol_type;
+ uint8_t copy_flag;
+ uint8_t compat;
+ ubi32_t vol_id;
+ ubi32_t lnum;
+ ubi32_t leb_ver; /* obsolete, to be removed, don't use */
+ ubi32_t data_size;
+ ubi32_t used_ebs;
+ ubi32_t data_pad;
+ ubi32_t data_crc;
+ uint8_t padding1[4];
+ ubi64_t sqnum;
+ uint8_t padding2[12];
+ ubi32_t hdr_crc;
+} __attribute__ ((packed));
+
+/* Internal UBI volumes count */
+#define UBI_INT_VOL_COUNT 1
+
+/*
+ * Starting ID of internal volumes. There is reserved room for 4096 internal
+ * volumes.
+ */
+#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
+
+/* The layout volume contains the volume table */
+
+#define UBI_LAYOUT_VOL_ID UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_EBS 2
+#define UBI_LAYOUT_VOLUME_NAME "layout volume"
+#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
+
+/* The maximum number of volumes per one UBI device */
+#define UBI_MAX_VOLUMES 128
+
+/* The maximum volume name length */
+#define UBI_VOL_NAME_MAX 127
+
+/* Size of the volume table record */
+#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)
+
+/* Size of the volume table record without the ending CRC */
+#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(ubi32_t))
+
+/**
+ * struct ubi_vtbl_record - a record in the volume table.
+ * @reserved_pebs: how many physical eraseblocks are reserved for this volume
+ * @alignment: volume alignment
+ * @data_pad: how many bytes are unused at the end of the each physical
+ * eraseblock to satisfy the requested alignment
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @upd_marker: if volume update was started but not finished
+ * @name_len: volume name length
+ * @name: the volume name
+ * @padding2: reserved, zeroes
+ * @crc: a CRC32 checksum of the record
+ *
+ * The volume table records are stored in the volume table, which is stored in
+ * the layout volume. The layout volume consists of 2 logical eraseblock, each
+ * of which contains a copy of the volume table (i.e., the volume table is
+ * duplicated). The volume table is an array of &struct ubi_vtbl_record
+ * objects indexed by the volume ID.
+ *
+ * If the size of the logical eraseblock is large enough to fit
+ * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES
+ * records. Otherwise, it contains as many records as it can fit (i.e., size of
+ * logical eraseblock divided by sizeof(struct ubi_vtbl_record)).
+ *
+ * The @upd_marker flag is used to implement volume update. It is set to %1
+ * before update and set to %0 after the update. So if the update operation was
+ * interrupted, UBI knows that the volume is corrupted.
+ *
+ * The @alignment field is specified when the volume is created and cannot be
+ * later changed. It may be useful, for example, when a block-oriented file
+ * system works on top of UBI. The @data_pad field is calculated using the
+ * logical eraseblock size and @alignment. The alignment must be multiple to the
+ * minimal flash I/O unit. If @alignment is 1, all the available space of
+ * the physical eraseblocks is used.
+ *
+ * Empty records contain all zeroes and the CRC checksum of those zeroes.
+ */
+struct ubi_vtbl_record {
+ ubi32_t reserved_pebs;
+ ubi32_t alignment;
+ ubi32_t data_pad;
+ uint8_t vol_type;
+ uint8_t upd_marker;
+ ubi16_t name_len;
+ uint8_t name[UBI_VOL_NAME_MAX+1];
+ uint8_t padding2[24];
+ ubi32_t crc;
+} __attribute__ ((packed));
+
+#endif /* !__UBI_HEADER_H__ */
diff --git a/include/linux/mtd/ubi-user.h b/include/linux/mtd/ubi-user.h
new file mode 100644
index 0000000..fe06ded
--- /dev/null
+++ b/include/linux/mtd/ubi-user.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __UBI_USER_H__
+#define __UBI_USER_H__
+
+/*
+ * UBI volume creation
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character
+ * device. A &struct ubi_mkvol_req object has to be properly filled and a
+ * pointer to it has to be passed to the IOCTL.
+ *
+ * UBI volume deletion
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character
+ * device should be used. A pointer to the 32-bit volume ID hast to be passed
+ * to the IOCTL.
+ *
+ * UBI volume re-size
+ * ~~~~~~~~~~~~~~~~~~
+ *
+ * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character
+ * device should be used. A &struct ubi_rsvol_req object has to be properly
+ * filled and a pointer to it has to be passed to the IOCTL.
+ *
+ * UBI volume update
+ * ~~~~~~~~~~~~~~~~~
+ *
+ * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
+ * corresponding UBI volume character device. A pointer to a 64-bit update
+ * size should be passed to the IOCTL. After then, UBI expects user to write
+ * this number of bytes to the volume character device. The update is finished
+ * when the claimed number of bytes is passed. So, the volume update sequence
+ * is something like:
+ *
+ * fd = open("/dev/my_volume");
+ * ioctl(fd, UBI_IOCVOLUP, &image_size);
+ * write(fd, buf, image_size);
+ * close(fd);
+ */
+
+/*
+ * When a new volume is created, users may either specify the volume number they
+ * want to create or to let UBI automatically assign a volume number using this
+ * constant.
+ */
+#define UBI_VOL_NUM_AUTO (-1)
+
+/* Maximum volume name length */
+#define UBI_MAX_VOLUME_NAME 127
+
+/* IOCTL commands of UBI character devices */
+
+#define UBI_IOC_MAGIC 'o'
+
+/* Create an UBI volume */
+#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
+/* Remove an UBI volume */
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
+/* Re-size an UBI volume */
+#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+
+/* IOCTL commands of UBI volume character devices */
+
+#define UBI_VOL_IOC_MAGIC 'O'
+
+/* Start UBI volume update */
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
+/* An eraseblock erasure command, used for debugging, disabled by default */
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
+
+/*
+ * UBI volume type constants.
+ *
+ * @UBI_DYNAMIC_VOLUME: dynamic volume
+ * @UBI_STATIC_VOLUME: static volume
+ */
+enum {
+ UBI_DYNAMIC_VOLUME = 3,
+ UBI_STATIC_VOLUME = 4
+};
+
+/**
+ * struct ubi_mkvol_req - volume description data structure used in
+ * volume creation requests.
+ * @vol_id: volume number
+ * @alignment: volume alignment
+ * @bytes: volume size in bytes
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @padding1: reserved for future, not used
+ * @name_len: volume name length
+ * @padding2: reserved for future, not used
+ * @name: volume name
+ *
+ * This structure is used by userspace programs when creating new volumes. The
+ * @used_bytes field is only necessary when creating static volumes.
+ *
+ * The @alignment field specifies the required alignment of the volume logical
+ * eraseblock. This means, that the size of logical eraseblocks will be aligned
+ * to this number, i.e.,
+ * (UBI device logical eraseblock size) mod (@alignment) = 0.
+ *
+ * To put it differently, the logical eraseblock of this volume may be slightly
+ * shortened in order to make it properly aligned. The alignment has to be
+ * multiple of the flash minimal input/output unit, or %1 to utilize the entire
+ * available space of logical eraseblocks.
+ *
+ * The @alignment field may be useful, for example, when one wants to maintain
+ * a block device on top of an UBI volume. In this case, it is desirable to fit
+ * an integer number of blocks in logical eraseblocks of this UBI volume. With
+ * alignment it is possible to update this volume using plane UBI volume image
+ * BLOBs, without caring about how to properly align them.
+ */
+struct ubi_mkvol_req {
+ int32_t vol_id;
+ int32_t alignment;
+ int64_t bytes;
+ int8_t vol_type;
+ int8_t padding1;
+ int16_t name_len;
+ int8_t padding2[4];
+ char name[UBI_MAX_VOLUME_NAME+1];
+} __attribute__ ((packed));
+
+/**
+ * struct ubi_rsvol_req - a data structure used in volume re-size requests.
+ * @vol_id: ID of the volume to re-size
+ * @bytes: new size of the volume in bytes
+ *
+ * Re-sizing is possible for both dynamic and static volumes. But while dynamic
+ * volumes may be re-sized arbitrarily, static volumes cannot be made to be
+ * smaller then the number of bytes they bear. To arbitrarily shrink a static
+ * volume, it must be wiped out first (by means of volume update operation with
+ * zero number of bytes).
+ */
+struct ubi_rsvol_req {
+ int64_t bytes;
+ int32_t vol_id;
+} __attribute__ ((packed));
+
+#endif /* __UBI_USER_H__ */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 897ecd6..70a4de7 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -30,7 +30,9 @@
/* IMMRBAR - Internal Memory Register Base Address
*/
+#ifndef CONFIG_DEFAULT_IMMR
#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
+#endif
#define IMMRBAR 0x0000 /* Register offset to immr */
#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
diff --git a/include/nand.h b/include/nand.h
index e1285cd..764e9f9 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -84,6 +84,7 @@
};
typedef struct nand_write_options nand_write_options_t;
+typedef struct mtd_oob_ops mtd_oob_ops_t;
struct nand_read_options {
u_char *buffer; /* memory block in which read image is written*/
@@ -107,9 +108,10 @@
typedef struct nand_erase_options nand_erase_options_t;
-int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts);
-
-int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts);
+int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+ u_char *buffer);
+int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+ u_char *buffer);
int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
#define NAND_LOCK_STATUS_TIGHT 0x01
@@ -124,5 +126,7 @@
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
+__attribute__((noreturn)) void nand_boot(void);
+
#endif /* !CFG_NAND_LEGACY */
#endif
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index 4449f98..4260ee7 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -39,6 +39,6 @@
extern int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
-extern void onenand_print_device_info(int device, int verbose);
+extern char *onenand_print_device_info(int device);
#endif /* __UBOOT_ONENAND_H */
diff --git a/lib_ppc/time.c b/lib_ppc/time.c
index 2649d5f..f093a57 100644
--- a/lib_ppc/time.c
+++ b/lib_ppc/time.c
@@ -67,7 +67,7 @@
}
/* ------------------------------------------------------------------------- */
-
+#ifndef CONFIG_NAND_SPL
unsigned long ticks2usec(unsigned long ticks)
{
ulong tbclk = get_tbclk();
@@ -83,7 +83,7 @@
return ((ulong)ticks);
}
-
+#endif
/* ------------------------------------------------------------------------- */
int init_timebase (void)
diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile
new file mode 100644
index 0000000..3da1b1f
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8313erdb/Makefile
@@ -0,0 +1,101 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+# (C) Copyright 2008 Freescale Semiconductor
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+TEXT_BASE := 0xfff00000
+PAD_TO := 0xfff04000
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o ticks.o
+COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+$(obj)start.S:
+ ln -sf $(SRCTREE)/cpu/mpc83xx/start.S $(obj)start.S
+
+$(obj)nand_boot_fsl_elbc.c:
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
+ $(obj)nand_boot_fsl_elbc.c
+
+$(obj)sdram.c:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
+
+$(obj)$(BOARD).c:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c
+
+$(obj)ns16550.c:
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)nand_init.c:
+ ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+
+$(obj)time.c:
+ ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c
+
+$(obj)ticks.S:
+ ln -sf $(SRCTREE)/lib_ppc/ticks.S $(obj)ticks.S
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/freescale/mpc8313erdb/u-boot.lds b/nand_spl/board/freescale/mpc8313erdb/u-boot.lds
new file mode 100644
index 0000000..40c4145
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8313erdb/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ . = 0xfff00000;
+ .text : {
+ *(.text*)
+ . = ALIGN(16);
+ *(.rodata*)
+ *(.eh_frame)
+ }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ *(.sdata*)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ __got2_entries = (. - _GOT2_TABLE_) >> 2;
+ }
+
+ . = ALIGN(8);
+ __bss_start = .;
+ .bss (NOLOAD) : { *(.*bss) }
+ _end = .;
+}
+ENTRY(_start)
+ASSERT(_end <= 0xfff01000, "NAND bootstrap too big");
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 563a80b..16d128f 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -20,6 +20,7 @@
#include <common.h>
#include <nand.h>
+#include <asm/io.h>
#define CFG_NAND_READ_DELAY \
{ volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
@@ -38,32 +39,31 @@
int page_addr = page + block * CFG_NAND_PAGE_COUNT;
if (this->dev_ready)
- this->dev_ready(mtd);
+ while (!this->dev_ready(mtd))
+ ;
else
CFG_NAND_READ_DELAY;
/* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, cmd);
+ this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
/* Set ALE and clear CLE to start address cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- this->hwcontrol(mtd, NAND_CTL_SETALE);
/* Column address */
- this->write_byte(mtd, offs); /* A[7:0] */
- this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
- this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
+ this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(mtd, page_addr & 0xff, 0); /* A[16:9] */
+ this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, 0); /* A[24:17] */
#ifdef CFG_NAND_4_ADDR_CYCLE
/* One more address cycle for devices > 32MiB */
- this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
+ this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[28:25] */
#endif
/* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
+ this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* Wait a while for the data to be ready
*/
if (this->dev_ready)
- this->dev_ready(mtd);
+ while (!this->dev_ready(mtd))
+ ;
else
CFG_NAND_READ_DELAY;
@@ -76,51 +76,45 @@
static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
{
struct nand_chip *this = mtd->priv;
- int page_offs = offs;
int page_addr = page + block * CFG_NAND_PAGE_COUNT;
if (this->dev_ready)
- this->dev_ready(mtd);
+ while (!this->dev_ready(mtd))
+ ;
else
CFG_NAND_READ_DELAY;
/* Emulate NAND_CMD_READOOB */
if (cmd == NAND_CMD_READOOB) {
- page_offs += CFG_NAND_PAGE_SIZE;
+ offs += CFG_NAND_PAGE_SIZE;
cmd = NAND_CMD_READ0;
}
/* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, cmd);
+ this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
/* Set ALE and clear CLE to start address cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- this->hwcontrol(mtd, NAND_CTL_SETALE);
/* Column address */
- this->write_byte(mtd, page_offs & 0xff); /* A[7:0] */
- this->write_byte(mtd, (uchar)((page_offs >> 8) & 0xff)); /* A[11:9] */
+ this->cmd_ctrl(mtd, offs & 0xff,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
+ this->cmd_ctrl(mtd, (offs >> 8) & 0xff, 0); /* A[11:9] */
/* Row address */
- this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */
- this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */
+ this->cmd_ctrl(mtd, (page_addr & 0xff), 0); /* A[19:12] */
+ this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), 0); /* A[27:20] */
#ifdef CFG_NAND_5_ADDR_CYCLE
/* One more address cycle for devices > 128MiB */
- this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:28] */
+ this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[31:28] */
#endif
/* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
-
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- /* Write out the start read command */
- this->write_byte(mtd, NAND_CMD_READSTART);
- /* End command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->cmd_ctrl(mtd, NAND_CMD_READSTART,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* Wait a while for the data to be ready
*/
if (this->dev_ready)
- this->dev_ready(mtd);
+ while (!this->dev_ready(mtd))
+ ;
else
CFG_NAND_READ_DELAY;
@@ -137,7 +131,7 @@
/*
* Read one byte
*/
- if (this->read_byte(mtd) != 0xff)
+ if (readb(this->IO_ADDR_R) != 0xff)
return 1;
return 0;
@@ -166,9 +160,9 @@
oob_data = ecc_calc + 0x200;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- this->enable_hwecc(mtd, NAND_ECC_READ);
+ this->ecc.hwctl(mtd, NAND_ECC_READ);
this->read_buf(mtd, p, eccsize);
- this->calculate_ecc(mtd, p, &ecc_calc[i]);
+ this->ecc.calculate(mtd, p, &ecc_calc[i]);
}
this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE);
@@ -184,35 +178,39 @@
* from correct_data(). We just hope that all possible errors
* are corrected by this routine.
*/
- stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ stat = this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
}
return 0;
}
-static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
+static int nand_load(struct mtd_info *mtd, unsigned int offs,
+ unsigned int uboot_size, uchar *dst)
{
- int block;
- int blockcopy_count;
- int page;
+ unsigned int block, lastblock;
+ unsigned int page;
/*
- * offs has to be aligned to a block address!
+ * offs has to be aligned to a page address!
*/
block = offs / CFG_NAND_BLOCK_SIZE;
- blockcopy_count = 0;
+ lastblock = (offs + uboot_size - 1) / CFG_NAND_BLOCK_SIZE;
+ page = (offs % CFG_NAND_BLOCK_SIZE) / CFG_NAND_PAGE_SIZE;
- while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) {
+ while (block <= lastblock) {
if (!nand_is_bad_block(mtd, block)) {
/*
* Skip bad blocks
*/
- for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) {
+ while (page < CFG_NAND_PAGE_COUNT) {
nand_read_page(mtd, block, page, dst);
dst += CFG_NAND_PAGE_SIZE;
+ page++;
}
- blockcopy_count++;
+ page = 0;
+ } else {
+ lastblock++;
}
block++;
@@ -231,7 +229,7 @@
struct nand_chip nand_chip;
nand_info_t nand_info;
int ret;
- void (*uboot)(void);
+ __attribute__((noreturn)) void (*uboot)(void);
/*
* Init board specific nand support
@@ -241,15 +239,21 @@
nand_chip.dev_ready = NULL; /* preset to NULL */
board_nand_init(&nand_chip);
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&nand_info, 0);
+
/*
* Load U-Boot image from NAND into RAM
*/
ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
(uchar *)CFG_NAND_U_BOOT_DST);
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&nand_info, -1);
+
/*
* Jump to U-Boot image
*/
- uboot = (void (*)(void))CFG_NAND_U_BOOT_START;
+ uboot = (void *)CFG_NAND_U_BOOT_START;
(*uboot)();
}
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
new file mode 100644
index 0000000..0d2378e
--- /dev/null
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -0,0 +1,150 @@
+/*
+ * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine
+ *
+ * (C) Copyright 2006-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_83xx.h>
+#include <asm/fsl_lbc.h>
+#include <linux/mtd/nand.h>
+
+#define WINDOW_SIZE 8192
+
+static void nand_wait(void)
+{
+ lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000);
+
+ for (;;) {
+ uint32_t status = in_be32(®s->ltesr);
+
+ if (status == 1)
+ return;
+
+ if (status & 1) {
+ puts("read failed (ltesr)\n");
+ for (;;);
+ }
+ }
+}
+
+static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
+{
+ lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000);
+ uchar *buf = (uchar *)CFG_NAND_BASE;
+ int large = in_be32(®s->bank[0].or) & OR_FCM_PGS;
+ int block_shift = large ? 17 : 14;
+ int block_size = 1 << block_shift;
+ int page_size = large ? 2048 : 512;
+ int bad_marker = large ? page_size + 0 : page_size + 5;
+ int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2;
+ int pos = 0;
+
+ if (offs & (block_size - 1)) {
+ puts("bad offset\n");
+ for (;;);
+ }
+
+ if (large) {
+ fmr |= FMR_ECCM;
+ out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+ out_be32(®s->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+ (FIR_OP_RBW << FIR_OP4_SHIFT));
+ } else {
+ out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
+ out_be32(®s->fir,
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_RBW << FIR_OP3_SHIFT));
+ }
+
+ out_be32(®s->fbcr, 0);
+ clrsetbits_be32(®s->bank[0].br, BR_DECC, BR_DECC_CHK_GEN);
+
+ while (pos < uboot_size) {
+ int i = 0;
+ out_be32(®s->fbar, offs >> block_shift);
+
+ do {
+ int j;
+ unsigned int page_offs = (offs & (block_size - 1)) << 1;
+
+ out_be32(®s->ltesr, ~0);
+ out_be32(®s->lteatr, 0);
+ out_be32(®s->fpar, page_offs);
+ out_be32(®s->fmr, fmr);
+ out_be32(®s->lsor, 0);
+ nand_wait();
+
+ page_offs %= WINDOW_SIZE;
+
+ /*
+ * If either of the first two pages are marked bad,
+ * continue to the next block.
+ */
+ if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) {
+ puts("skipping\n");
+ offs = (offs + block_size) & ~(block_size - 1);
+ pos &= ~(block_size - 1);
+ break;
+ }
+
+ for (j = 0; j < page_size; j++)
+ dst[pos + j] = buf[page_offs + j];
+
+ pos += page_size;
+ offs += page_size;
+ } while (offs & (block_size - 1));
+ }
+}
+
+/*
+ * The main entry for NAND booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from NAND into SDRAM and starts it from there.
+ */
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ udelay(1000000);
+
+ /*
+ * Load U-Boot image from NAND into RAM
+ */
+ nand_load(CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
+ (uchar *)CFG_NAND_U_BOOT_DST);
+
+ /*
+ * Jump to U-Boot image
+ */
+ puts("transfering control\n");
+ uboot = (void *)CFG_NAND_U_BOOT_START;
+ uboot();
+}