usb: replace wait_ms() with mdelay()
Common code has a mdelay() func, so use that instead of the usb-specific
wait_ms() func. This also fixes the build errors:
ohci-hcd.c: In function 'submit_common_msg':
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1519:9: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1816:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1827:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1844:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1563:11: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1583:9: sorry, unimplemented: called from here
make[1]: *** [ohci-hcd.o] Error 1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d6fee81..ef5afc2 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -776,7 +776,7 @@
goto unknown;
}
- wait_ms(1);
+ mdelay(1);
len = min3(srclen, le16_to_cpu(req->length), length);
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
@@ -857,7 +857,7 @@
ehci_writel(&hcor->or_configflag, cmd);
/* unblock posted write */
cmd = ehci_readl(&hcor->or_usbcmd);
- wait_ms(5);
+ mdelay(5);
reg = HC_VERSION(ehci_readl(&hccr->cr_capbase));
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index abdcbb4..5ef34c3 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -578,7 +578,7 @@
/* When root hub or any of its ports is going
to come out of suspend, it may take more
than 10ms for status bits to stabilize. */
- wait_ms(20);
+ mdelay(20);
}
if (intstat & HCINT_SO) {
@@ -679,7 +679,7 @@
/* Pack data into FIFO ram */
pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
#ifdef EXTRA_DELAY
- wait_ms(EXTRA_DELAY);
+ mdelay(EXTRA_DELAY);
#endif
/* Start the data transfer */
@@ -983,11 +983,11 @@
HCRHPORT1 + wIndex - 1);
if (!(tmp & RH_PS_PRS))
break;
- wait_ms(1);
+ mdelay(1);
}
isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
RH_PS_PRS);
- wait_ms(10);
+ mdelay(10);
len = 0;
break;
@@ -1251,7 +1251,7 @@
isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
while (--retries) {
/* It usually resets within 1 ms */
- wait_ms(1);
+ mdelay(1);
if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
break;
}
@@ -1278,7 +1278,7 @@
clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
if (clkrdy)
break;
- wait_ms(1);
+ mdelay(1);
}
if (!clkrdy) {
ERR("clock not ready after %dms", timeout);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 1a428e9..d24f2f1 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1279,7 +1279,7 @@
pkt_print(NULL, dev, pipe, buffer, transfer_len,
cmd, "SUB(rh)", usb_pipein(pipe));
#else
- wait_ms(1);
+ mdelay(1);
#endif
if (usb_pipeint(pipe)) {
info("Root-Hub submit IRQ: NOT implemented");
@@ -1360,7 +1360,7 @@
OK(0);
case (RH_PORT_POWER):
WR_RH_PORTSTAT(RH_PS_PPS);
- wait_ms(100);
+ mdelay(100);
OK(0);
case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
if (RD_RH_PORTSTAT & RH_PS_CCS)
@@ -1465,7 +1465,7 @@
#ifdef DEBUG
ohci_dump_roothub(&gohci, 1);
#else
- wait_ms(1);
+ mdelay(1);
#endif
len = min_t(int, len, leni);
@@ -1478,7 +1478,7 @@
pkt_print(NULL, dev, pipe, buffer,
transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
#else
- wait_ms(1);
+ mdelay(1);
#endif
return stat;
@@ -1516,7 +1516,7 @@
pkt_print(urb, dev, pipe, buffer, transfer_len,
setup, "SUB", usb_pipein(pipe));
#else
- wait_ms(1);
+ mdelay(1);
#endif
if (!maxsize) {
err("submit_common_message: pipesize for pipe %lx is zero",
@@ -1530,7 +1530,7 @@
}
#if 0
- wait_ms(10);
+ mdelay(10);
/* ohci_dump_status(&gohci); */
#endif
@@ -1560,7 +1560,7 @@
}
if (--timeout) {
- wait_ms(1);
+ mdelay(1);
if (!urb->finished)
dbg("*");
@@ -1580,7 +1580,7 @@
pkt_print(urb, dev, pipe, buffer, transfer_len,
setup, "RET(ctlr)", usb_pipein(pipe));
#else
- wait_ms(1);
+ mdelay(1);
#endif
/* free TDs in urb_priv */
@@ -1607,7 +1607,7 @@
pkt_print(NULL, dev, pipe, buffer, transfer_len,
setup, "SUB", usb_pipein(pipe));
#else
- wait_ms(1);
+ mdelay(1);
#endif
if (!maxsize) {
err("submit_control_message: pipesize for pipe %lx is zero",
@@ -1677,7 +1677,7 @@
ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
info("USB HC TakeOver from SMM");
while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms(10);
+ mdelay(10);
if (--smm_timeout == 0) {
err("USB HC TakeOver failed!");
return -1;
@@ -1813,7 +1813,7 @@
#ifdef DEBUG
ohci_dump(ohci, 1);
#else
- wait_ms(1);
+ mdelay(1);
#endif
/* FIXME: be optimistic, hope that bug won't repeat often. */
/* Make some non-interrupt context restart the controller. */
@@ -1824,7 +1824,7 @@
}
if (ints & OHCI_INTR_WDH) {
- wait_ms(1);
+ mdelay(1);
ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
(void)ohci_readl(®s->intrdisable); /* flush */
stat = dl_done_list(&gohci);
@@ -1841,7 +1841,7 @@
/* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
if (ints & OHCI_INTR_SF) {
unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
- wait_ms(1);
+ mdelay(1);
ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
if (ohci->ed_rm_list[frame] != NULL)
ohci_writel(OHCI_INTR_SF, ®s->intrenable);
@@ -1973,7 +1973,7 @@
#ifdef DEBUG
ohci_dump(&gohci, 1);
#else
- wait_ms(1);
+ mdelay(1);
#endif
ohci_inited = 1;
return 0;
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index aa753d8..ab1b8d0 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -497,7 +497,7 @@
old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
while (count > 0) {
- wait_ms(R8A66597_RH_POLL_TIME);
+ mdelay(R8A66597_RH_POLL_TIME);
syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
if (syssts == old_syssts) {
@@ -511,11 +511,11 @@
static void r8a66597_bus_reset(struct r8a66597 *r8a66597, int port)
{
- wait_ms(10);
+ mdelay(10);
r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT, get_dvstctr_reg(port));
- wait_ms(50);
+ mdelay(50);
r8a66597_mdfy(r8a66597, UACT, USBRST | UACT, get_dvstctr_reg(port));
- wait_ms(50);
+ mdelay(50);
}
static int check_usb_device_connecting(struct r8a66597 *r8a66597)
@@ -823,7 +823,7 @@
stat = USB_ST_STALLED;
}
- wait_ms(1);
+ mdelay(1);
len = min_t(int, len, leni);
@@ -918,7 +918,7 @@
r8a66597->reg = CONFIG_R8A66597_BASE_ADDR;
disable_controller(r8a66597);
- wait_ms(100);
+ mdelay(100);
enable_controller(r8a66597);
r8a66597_port_power(r8a66597, 0 , 1);
@@ -926,7 +926,7 @@
/* check usb device */
check_usb_device_connecting(r8a66597);
- wait_ms(50);
+ mdelay(50);
return 0;
}