usb: dwc3: Makefile: Make dwc3 driver compile in u-boot
Now that the entire dwc3 driver is adapted to compile with uboot build,
modify the Makefiles so that the dwc3 driver can be built.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index afaa767..e455a52 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -1,37 +1,8 @@
-ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG
-ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG
-
obj-$(CONFIG_USB_DWC3) += dwc3.o
-dwc3-y := core.o debug.o
+dwc3-y := core.o
-ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
- dwc3-y += host.o
-endif
-
-ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
- dwc3-y += gadget.o ep0.o
-endif
-
-ifneq ($(CONFIG_DEBUG_FS),)
- dwc3-y += debugfs.o
-endif
-
-##
-# Platform-specific glue layers go here
-#
-# NOTICE: Make sure your glue layer doesn't depend on anything
-# which is arch-specific and that it compiles on all situations.
-#
-# We want to keep this requirement in order to be able to compile
-# the entire driver (with all its glue layers) on several architectures
-# and make sure it compiles fine. This will also help with allmodconfig
-# and allyesconfig builds.
-##
+dwc3-y += gadget.o ep0.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
-obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
-obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
-obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
-obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
-obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
+obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index be265aa..12380f4 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -1,4 +1,4 @@
#
# USB peripheral controller drivers
#
-obj-$(CONFIG_USB_GADGET) += udc-core.o
+obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o