clk: rockchip: Add rk322x gamc clock support
Assuming mac_clk is fed by an external clock, set clk_rmii_src
clock select control register from IO for rgmii interface.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/drivers/clk/rockchip/clk_rk322x.c b/drivers/clk/rockchip/clk_rk322x.c
index c8a2413..4e6d2f0 100644
--- a/drivers/clk/rockchip/clk_rk322x.c
+++ b/drivers/clk/rockchip/clk_rk322x.c
@@ -239,6 +239,41 @@
return DIV_TO_RATE(src_rate, div) / 2;
}
+static ulong rk322x_mac_set_clk(struct rk322x_cru *cru, uint freq)
+{
+ ulong ret;
+
+ /*
+ * The gmac clock can be derived either from an external clock
+ * or can be generated from internally by a divider from SCLK_MAC.
+ */
+ if (readl(&cru->cru_clksel_con[5]) & BIT(5)) {
+ /* An external clock will always generate the right rate... */
+ ret = freq;
+ } else {
+ u32 con = readl(&cru->cru_clksel_con[5]);
+ ulong pll_rate;
+ u8 div;
+
+ if ((con >> MAC_PLL_SEL_SHIFT) & MAC_PLL_SEL_MASK)
+ pll_rate = GPLL_HZ;
+ else
+ /* CPLL is not set */
+ return -EPERM;
+
+ div = DIV_ROUND_UP(pll_rate, freq) - 1;
+ if (div <= 0x1f)
+ rk_clrsetreg(&cru->cru_clksel_con[5], CLK_MAC_DIV_MASK,
+ div << CLK_MAC_DIV_SHIFT);
+ else
+ debug("Unsupported div for gmac:%d\n", div);
+
+ return DIV_TO_RATE(pll_rate, div);
+ }
+
+ return ret;
+}
+
static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate,
int periph, uint freq)
{
@@ -352,6 +387,11 @@
case CLK_DDR:
new_rate = rk322x_ddr_set_clk(priv->cru, rate);
break;
+ case SCLK_MAC:
+ new_rate = rk322x_mac_set_clk(priv->cru, rate);
+ break;
+ case PLL_GPLL:
+ return 0;
default:
return -ENOENT;
}
@@ -359,9 +399,76 @@
return new_rate;
}
+static int rk322x_gmac_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
+ struct rk322x_cru *cru = priv->cru;
+
+ /*
+ * If the requested parent is in the same clock-controller and the id
+ * is SCLK_MAC_SRC ("sclk_gmac_src"), switch to the internal clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_SRC)) {
+ debug("%s: switching RGMII to SCLK_MAC_SRC\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[5], BIT(5), 0);
+ return 0;
+ }
+
+ /*
+ * If the requested parent is in the same clock-controller and the id
+ * is SCLK_MAC_EXTCLK (sclk_mac_extclk), switch to the external clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_EXTCLK)) {
+ debug("%s: switching RGMII to SCLK_MAC_EXTCLK\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[5], BIT(5), BIT(5));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk322x_gmac_extclk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
+ const char *clock_output_name;
+ struct rk322x_cru *cru = priv->cru;
+ int ret;
+
+ ret = dev_read_string_index(parent->dev, "clock-output-names",
+ parent->id, &clock_output_name);
+ if (ret < 0)
+ return -ENODATA;
+
+ if (!strcmp(clock_output_name, "ext_gmac")) {
+ debug("%s: switching gmac extclk to ext_gmac\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[29], BIT(10), 0);
+ return 0;
+ } else if (!strcmp(clock_output_name, "phy_50m_out")) {
+ debug("%s: switching gmac extclk to phy_50m_out\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[29], BIT(10), BIT(10));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk322x_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ switch (clk->id) {
+ case SCLK_MAC:
+ return rk322x_gmac_set_parent(clk, parent);
+ case SCLK_MAC_EXTCLK:
+ return rk322x_gmac_extclk_set_parent(clk, parent);
+ }
+
+ debug("%s: unsupported clk %ld\n", __func__, clk->id);
+ return -ENOENT;
+}
+
static struct clk_ops rk322x_clk_ops = {
.get_rate = rk322x_clk_get_rate,
.set_rate = rk322x_clk_set_rate,
+ .set_parent = rk322x_clk_set_parent,
};
static int rk322x_clk_ofdata_to_platdata(struct udevice *dev)