commit 5c73536738e1aa411b127d84dff41a5e60a4e610
author Kever Yang <kever.yang@rock-chips.com> Fri Mar 10 12:05:14 2017 +0800
committer Marek Vasut <marex@denx.de> Fri Apr 14 14:07:46 2017 +0200
tree 92e78508316b210ed09880c65886df02566e1423
parent 40a808f173008729a0c631ab84693b6a2b0dcfc9

usb: dwc2: add support for external vbus supply

Some board do not use the dwc2 internal VBUS_DRV signal, but
use a gpio pin to enable the 5.0V VBUS power, add interface to
enable the power in dwc2 driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

drivers/usb/host/dwc2.c

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index d253b94..ae7d8fb 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -15,6 +15,7 @@
 #include <usbroothubdes.h>
 #include <wait_bit.h>
 #include <asm/io.h>
+#include <power/regulator.h>
 
 #include "dwc2.h"
 
@@ -159,6 +160,33 @@
 	mdelay(100);
 }
 
+#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
+static int dwc_vbus_supply_init(struct udevice *dev)
+{
+	struct udevice *vbus_supply;
+	int ret;
+
+	ret = device_get_supply_regulator(dev, "vbus-supply", &vbus_supply);
+	if (ret) {
+		debug("%s: No vbus supply\n", dev->name);
+		return 0;
+	}
+
+	ret = regulator_set_enable(vbus_supply, true);
+	if (ret) {
+		error("Error enabling vbus supply\n");
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int dwc_vbus_supply_init(struct udevice *dev)
+{
+	return 0;
+}
+#endif
+
 /*
  * This function initializes the DWC_otg controller registers for
  * host mode.
@@ -167,10 +195,12 @@
  * request queues. Host channels are reset to ensure that they are ready for
  * performing transfers.
  *
+ * @param dev USB Device (NULL if driver model is not being used)
  * @param regs Programming view of DWC_otg controller
  *
  */
-static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
+static void dwc_otg_core_host_init(struct udevice *dev,
+				   struct dwc2_core_regs *regs)
 {
 	uint32_t nptxfifosize = 0;
 	uint32_t ptxfifosize = 0;
@@ -248,6 +278,9 @@
 			writel(hprt0, &regs->hprt0);
 		}
 	}
+
+	if (dev)
+		dwc_vbus_supply_init(dev);
 }
 
 /*
@@ -1048,7 +1081,7 @@
 	}
 }
 
-static int dwc2_init_common(struct dwc2_priv *priv)
+static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
 {
 	struct dwc2_core_regs *regs = priv->regs;
 	uint32_t snpsid;
@@ -1070,7 +1103,7 @@
 #endif
 
 	dwc_otg_core_init(priv);
-	dwc_otg_core_host_init(regs);
+	dwc_otg_core_host_init(dev, regs);
 
 	clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
 			DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
@@ -1143,7 +1176,7 @@
 	if (board_usb_init(index, USB_INIT_HOST))
 		return -1;
 
-	return dwc2_init_common(priv);
+	return dwc2_init_common(NULL, priv);
 }
 
 int usb_lowlevel_stop(int index)
@@ -1214,7 +1247,7 @@
 
 	bus_priv->desc_before_addr = true;
 
-	return dwc2_init_common(priv);
+	return dwc2_init_common(dev, priv);
 }
 
 static int dwc2_usb_remove(struct udevice *dev)