board: Add STMicroelectronics STiH410-B2260 support
This is a 96Board compliant board based on STiH410 SoC:
- 1GB DDR
- On-Board USB combo WiFi/Bluetooth RTL8723BU
with PCB soldered antenna
- Ethernet 1000-BaseT
- SATA
- HDMI
- 2 x USB2.0 type A
- 1 x USB2.0 type micro-AB
- SD card slot
- High speed connector (SD/I2C/USB interfaces)
- Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/board/st/stih410-b2260/Kconfig b/board/st/stih410-b2260/Kconfig
new file mode 100644
index 0000000..590add0
--- /dev/null
+++ b/board/st/stih410-b2260/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STIH410_B2260
+
+config SYS_BOARD
+ string
+ default "stih410-b2260"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stih410"
+
+config SYS_CONFIG_NAME
+ string
+ default "stih410-b2260"
+
+endif
diff --git a/board/st/stih410-b2260/MAINTAINERS b/board/st/stih410-b2260/MAINTAINERS
new file mode 100644
index 0000000..4f557ac
--- /dev/null
+++ b/board/st/stih410-b2260/MAINTAINERS
@@ -0,0 +1,7 @@
+STIH410-B2260 BOARD
+M: Patrice Chotard <patrice.chotard@st.com>
+S: Maintained
+F: board/st/stih410-b2260/
+F: include/configs/stih410-b2260.h
+F: configs/stih410-b2260_defconfig
+F: arch/arm/dts/stih*
diff --git a/board/st/stih410-b2260/Makefile b/board/st/stih410-b2260/Makefile
new file mode 100644
index 0000000..68a7903
--- /dev/null
+++ b/board/st/stih410-b2260/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2017
+# Patrice Chotard, <patrice.chotard@st.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = board.o
diff --git a/board/st/stih410-b2260/board.c b/board/st/stih410-b2260/board.c
new file mode 100644
index 0000000..0c06bca
--- /dev/null
+++ b/board/st/stih410-b2260/board.c
@@ -0,0 +1,28 @@
+/*
+ * Board init file for STiH410-B2260
+ *
+ * (C) Copyright 2017 Patrice Chotard <patrice.chotard@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+int board_init(void)
+{
+ return 0;
+}