Update MPC8560 ADS to use libfdt
Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 4a30bce..7a7941f 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -32,10 +32,8 @@
#include <ioports.h>
#include <spd.h>
#include <miiphy.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -547,35 +545,25 @@
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_soc_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/" OF_SOC "/cpm@e0000000/brg-frequency", &len);
-
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_brgfreq);
-
- p = ft_get_prop(blob,
- "/" OF_SOC "/cpm@e0000000/scc@91a00/current-speed",
- &len);
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_baudrate);
-
- p = ft_get_prop(blob,
- "/" OF_SOC "/cpm@e0000000/scc@91a20/current-speed",
- &len);
- if (p != NULL)
- *p = cpu_to_be32(bd->bi_baudrate);
-}
-
+#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
+ int node, tmp[2];
+ const char *path;
+
ft_cpu_setup(blob, bd);
- ft_soc_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose.last_busno - hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
}
#endif
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a8f362f..a24ac15 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -289,13 +289,9 @@
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8560@0"
-#define OF_SOC "soc8560@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* I2C
@@ -525,6 +521,8 @@
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.253