* Modify KUP4X board configuration to use SL811 driver for USB memory
sticks (including FAT / VFAT filesystem support)
* Add SL811 Host Controller Interface driver for USB
* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
* Patch by Pantelis Antoniou, 19 Apr 2004:
Allow to use shell style syntax (i. e. ${var} ) with standard parser.
Minor patches for Intracom boards.
* Patch by Christian Pell, 19 Apr 2004:
cleanup support for CF/IDE on PCMCIA for PXA25X
diff --git a/README b/README
index df2c295..d441442 100644
--- a/README
+++ b/README
@@ -1751,6 +1751,17 @@
The length in bytes of the EEPROM memory array address. Note
that this is NOT the chip address length!
+ - CFG_I2C_EEPROM_ADDR_OVERFLOW:
+ EEPROM chips that implement "address overflow" are ones
+ like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ address and the extra bits end up in the "chip address" bit
+ slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+ byte chips.
+
+ Note that we consider the length of the address field to
+ still be one byte because the extra address bits are hidden
+ in the chip address.
+
- CFG_EEPROM_SIZE:
The size in bytes of the EEPROM device.
@@ -1972,6 +1983,16 @@
Note that this is a global option, we can't
have one FEC in standard MII mode and another in RMII mode.
+- CONFIG_CRC32_VERIFY
+ Add a verify option to the crc32 command.
+ The syntax is:
+
+ => crc32 -v <address> <count> <crc32>
+
+ Where address/count indicate a memory area
+ and crc32 is the correct crc32 which the
+ area should have.
+
Building the Software:
======================