verdin-imx8mm: switch to use binman to pack images
Use binman to pack images.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
index b9f7dc3..a11c82d 100644
--- a/doc/board/toradex/verdin-imx8mm.rst
+++ b/doc/board/toradex/verdin-imx8mm.rst
@@ -34,10 +34,10 @@
.. code-block:: bash
$ cd ..
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
- $ chmod +x firmware-imx-8.4.1.bin
- $ ./firmware-imx-8.4.1.bin
- $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
+ $ chmod +x firmware-imx-8.10.1.bin
+ $ ./firmware-imx-8.10.1.bin
+ $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*.bin ./
Build U-Boot
------------
@@ -46,7 +46,7 @@
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ export ATF_LOAD_ADDR=0x920000
$ make verdin-imx8mm_defconfig
- $ make flash.bin
+ $ make
Flash to eMMC
-------------
@@ -78,21 +78,28 @@
.. code-block:: bash
- U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
- Normal Boot
- Trying to boot from MMC1
+U-Boot SPL 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
+Normal Boot
+WDT: Started with servicing (60s timeout)
+Trying to boot from MMC1
+NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
+NOTICE: BL31: Built : 18:02:12, Aug 16 2021
- U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
- CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
- Reset cause: POR
- DRAM: 2 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
- Loading Environment from MMC... OK
- In: serial
- Out: serial
- Err: serial
- Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
- Net: eth0: ethernet@30be0000
- Hit any key to stop autoboot: 0
- Verdin iMX8MM #
+U-Boot 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
+
+CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz
+Reset cause: POR
+DRAM: 2 GiB
+WDT: Started with servicing (60s timeout)
+MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
+Loading Environment from MMC... OK
+In: serial
+Out: serial
+Err: serial
+Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.1A, Serial# 06760554
+Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333
+Setting variant to wifi
+Net: eth0: ethernet@30be0000
+Hit any key to stop autoboot: 0
+Verdin iMX8MM #