mpc8xx: remove FPS{850, 860}L, NSCU, SM850, TK885D, virtlab2 support
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/board/tqc/tqm8xx/Kconfig b/board/tqc/tqm8xx/Kconfig
index 926a37a..857fedb 100644
--- a/board/tqc/tqm8xx/Kconfig
+++ b/board/tqc/tqm8xx/Kconfig
@@ -1,68 +1,3 @@
-if TARGET_FPS850L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "FPS850L"
-
-endif
-
-if TARGET_FPS860L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "FPS860L"
-
-endif
-
-if TARGET_NSCU
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "NSCU"
-
-endif
-
-if TARGET_SM850
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "SM850"
-
-endif
-
-if TARGET_TK885D
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TK885D"
-
-endif
-
if TARGET_TQM823L
config SYS_BOARD
@@ -218,16 +153,3 @@
default "TQM885D"
endif
-
-if TARGET_VIRTLAB2
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "virtlab2"
-
-endif
diff --git a/board/tqc/tqm8xx/MAINTAINERS b/board/tqc/tqm8xx/MAINTAINERS
index fe4a212..f3ddc6a 100644
--- a/board/tqc/tqm8xx/MAINTAINERS
+++ b/board/tqc/tqm8xx/MAINTAINERS
@@ -2,12 +2,6 @@
M: Wolfgang Denk <wd@denx.de>
S: Maintained
F: board/tqc/tqm8xx/
-F: include/configs/FPS850L.h
-F: configs/FPS850L_defconfig
-F: include/configs/FPS860L.h
-F: configs/FPS860L_defconfig
-F: include/configs/SM850.h
-F: configs/SM850_defconfig
F: include/configs/TQM823L.h
F: configs/TQM823L_defconfig
F: configs/TQM823L_LCD_defconfig
@@ -34,14 +28,4 @@
F: include/configs/TQM885D.h
F: configs/TQM885D_defconfig
F: configs/TTTech_defconfig
-F: include/configs/virtlab2.h
-F: configs/virtlab2_defconfig
F: configs/wtk_defconfig
-
-NSCU BOARD
-#M: -
-S: Maintained
-F: include/configs/NSCU.h
-F: configs/NSCU_defconfig
-F: include/configs/TK885D.h
-F: configs/TK885D_defconfig
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 3b5230a..6d17830 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -118,9 +118,7 @@
break;
putc (buf[i]);
}
-#ifdef CONFIG_VIRTLAB2
- puts (" (Virtlab2)");
-#endif
+
putc ('\n');
return (0);
@@ -512,14 +510,6 @@
immap->im_ioport.iop_padat &= ~0x0001; /* turn it off */
# endif
-#ifdef CONFIG_NSCU
- /* wake up ethernet module */
- immap->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin */
- immap->im_ioport.iop_pcdir |= 0x0004; /* output */
- immap->im_ioport.iop_pcso &= ~0x0004; /* for clarity */
- immap->im_ioport.iop_pcdat |= 0x0004; /* enable */
-#endif /* CONFIG_NSCU */
-
return (0);
}
#endif /* CONFIG_MISC_INIT_R */
@@ -682,49 +672,3 @@
return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
-
-/* ---------------------------------------------------------------------------- */
-/* TK885D specific initializaion */
-/* ---------------------------------------------------------------------------- */
-#ifdef CONFIG_TK885D
-#include <miiphy.h>
-int last_stage_init(void)
-{
- const unsigned char phy[] = {CONFIG_FEC1_PHY, CONFIG_FEC2_PHY};
- unsigned short reg;
- int ret, i = 100;
- char *s;
-
- mii_init();
- /* Without this delay 0xff is read from the UART buffer later in
- * abortboot() and autoboot is aborted */
- udelay(10000);
- while (tstc() && i--)
- (void)getc();
-
- /* Check if auto-negotiation is prohibited */
- s = getenv("phy_auto_nego");
-
- if (!s || !strcmp(s, "on"))
- /* Nothing to do - autonegotiation by default */
- return 0;
-
- for (i = 0; i < 2; i++) {
- ret = miiphy_read("FEC", phy[i], MII_BMCR, ®);
- if (ret) {
- printf("Cannot read BMCR on PHY %d\n", phy[i]);
- return 0;
- }
- /* Auto-negotiation off, hard set full duplex, 100Mbps */
- ret = miiphy_write("FEC", phy[i],
- MII_BMCR, (reg | BMCR_SPEED100 |
- BMCR_FULLDPLX) & ~BMCR_ANENABLE);
- if (ret) {
- printf("Cannot write BMCR on PHY %d\n", phy[i]);
- return 0;
- }
- }
-
- return 0;
-}
-#endif