imx6ul/imx6ull: synchronise device trees with linux
Synchronise device trees with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index e9ec6b7..09a83db 100644
--- a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -11,20 +11,15 @@
chosen {
stdout-path = &uart4;
};
-
- memory@80000000 {
- reg = <0x80000000 0x10000000>;
- device_type = "memory";
- };
};
&ecspi2 {
- cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
@@ -60,16 +55,13 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
+};
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- spi-max-frequency = <104000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- reg = <0>;
- };
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
};
&iomuxc {
@@ -121,4 +113,10 @@
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
+ >;
+ };
};