rockchip: video: rk_vop: migrate to livetree
This migrates rk_vop (the shared functions used by multiple VOP
mini-drivers) to be compatible with a live tree.
Unfortunately, there's
(i) a lot of tree traversal needed for a VOP (as each active VOP
vnode references back to the endpoints in the encoders and vice
versa) to configure the connection between VOPs and encoders;
(ii) the DTS binding is not too sane and one needs to walk a node's
parents (the original code just assumed that the device would
live 3 levels above the property linked through a phandle) until
a UCLASS_DISPLAY device can be found.
As part of the migration, the code for finding the enclosing display
device has been changed to not assume a specific depth of nesting
(i.e. we walk until we reach the root or find a matching device) and
to use the newly introduced (in the same series) ofnode_get_parent()
function.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index c979049..1288608 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -218,41 +218,67 @@
* node within the VOP's 'port' list.
* @return 0 if OK, -ve if something went wrong
*/
-static int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
+static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node)
{
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
- const void *blob = gd->fdt_blob;
struct rk_vop_priv *priv = dev_get_priv(dev);
int vop_id, remote_vop_id;
struct rk3288_vop *regs = priv->regs;
struct display_timing timing;
struct udevice *disp;
- int ret, remote, i, offset;
+ int ret;
+ u32 remote_phandle;
struct display_plat *disp_uc_plat;
struct clk clk;
enum video_log2_bpp l2bpp;
+ ofnode remote;
- vop_id = fdtdec_get_int(blob, ep_node, "reg", -1);
+ debug("%s(%s, %lu, %s)\n", __func__,
+ dev_read_name(dev), fbbase, ofnode_get_name(ep_node));
+
+ vop_id = ofnode_read_s32_default(ep_node, "reg", -1);
debug("vop_id=%d\n", vop_id);
- remote = fdtdec_lookup_phandle(blob, ep_node, "remote-endpoint");
- if (remote < 0)
+ ret = ofnode_read_u32(ep_node, "remote-endpoint", &remote_phandle);
+ if (ret)
+ return ret;
+
+ remote = ofnode_get_by_phandle(remote_phandle);
+ if (!ofnode_valid(remote))
return -EINVAL;
- remote_vop_id = fdtdec_get_int(blob, remote, "reg", -1);
+ remote_vop_id = ofnode_read_u32_default(remote, "reg", -1);
debug("remote vop_id=%d\n", remote_vop_id);
- for (i = 0, offset = remote; i < 3 && offset > 0; i++)
- offset = fdt_parent_offset(blob, offset);
- if (offset < 0) {
- debug("%s: Invalid remote-endpoint position\n", dev->name);
- return -EINVAL;
- }
+ /*
+ * The remote-endpoint references into a subnode of the encoder
+ * (i.e. HDMI, MIPI, etc.) with the DTS looking something like
+ * the following (assume 'hdmi_in_vopl' to be referenced):
+ *
+ * hdmi: hdmi@ff940000 {
+ * ports {
+ * hdmi_in: port {
+ * hdmi_in_vopb: endpoint@0 { ... };
+ * hdmi_in_vopl: endpoint@1 { ... };
+ * }
+ * }
+ * }
+ *
+ * The original code had 3 steps of "walking the parent", but
+ * a much better (as in: less likely to break if the DTS
+ * changes) way of doing this is to "find the enclosing device
+ * of UCLASS_DISPLAY".
+ */
+ while (ofnode_valid(remote)) {
+ remote = ofnode_get_parent(remote);
+ if (!ofnode_valid(remote)) {
+ debug("%s(%s): no UCLASS_DISPLAY for remote-endpoint\n",
+ __func__, dev_read_name(dev));
+ return -EINVAL;
+ }
- ret = uclass_find_device_by_of_offset(UCLASS_DISPLAY, offset, &disp);
- if (ret) {
- debug("%s: device '%s' display not found (ret=%d)\n", __func__,
- dev->name, ret);
- return ret;
- }
+ uclass_find_device_by_ofnode(UCLASS_DISPLAY, remote, &disp);
+ if (disp)
+ break;
+ };
disp_uc_plat = dev_get_uclass_platdata(disp);
debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);
@@ -334,16 +360,15 @@
int rk_vop_probe(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
- const void *blob = gd->fdt_blob;
struct rk_vop_priv *priv = dev_get_priv(dev);
int ret = 0;
- int port, node;
+ ofnode port, node;
/* Before relocation we don't need to do anything */
if (!(gd->flags & GD_FLG_RELOC))
return 0;
- priv->regs = (struct rk3288_vop *)devfdt_get_addr(dev);
+ priv->regs = (struct rk3288_vop *)dev_read_addr(dev);
/*
* Try all the ports until we find one that works. In practice this
@@ -353,12 +378,16 @@
* clock so it is currently not possible to use more than one display
* device simultaneously.
*/
- port = fdt_subnode_offset(blob, dev_of_offset(dev), "port");
- if (port < 0)
+ port = dev_read_subnode(dev, "port");
+ if (!ofnode_valid(port)) {
+ debug("%s(%s): 'port' subnode not found\n",
+ __func__, dev_read_name(dev));
return -EINVAL;
- for (node = fdt_first_subnode(blob, port);
- node > 0;
- node = fdt_next_subnode(blob, node)) {
+ }
+
+ for (node = ofnode_first_subnode(port);
+ ofnode_valid(node);
+ node = dev_read_next_subnode(node)) {
ret = rk_display_init(dev, plat->base, node);
if (ret)
debug("Device failed: ret=%d\n", ret);